2 * ARM IoT Kit security controller
4 * Copyright (c) 2018 Linaro Limited
5 * Written by Peter Maydell
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 or
9 * (at your option) any later version.
12 /* This is a model of the security controller which is part of the
13 * Arm IoT Kit and documented in
14 * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ecm0601256/index.html
17 * + sysbus MMIO region 0 is the "secure privilege control block" registers
18 * + sysbus MMIO region 1 is the "non-secure privilege control block" registers
19 * + named GPIO output "sec_resp_cfg" indicating whether blocked accesses
20 * should RAZ/WI or bus error
21 * + named GPIO output "nsc_cfg" whose value tracks the NSCCFG register value
22 * + named GPIO output "msc_irq" for the combined IRQ line from the MSCs
23 * Controlling the 2 APB PPCs in the IoTKit:
24 * + named GPIO outputs apb_ppc0_nonsec[0..2] and apb_ppc1_nonsec
25 * + named GPIO outputs apb_ppc0_ap[0..2] and apb_ppc1_ap
26 * + named GPIO outputs apb_ppc{0,1}_irq_enable
27 * + named GPIO outputs apb_ppc{0,1}_irq_clear
28 * + named GPIO inputs apb_ppc{0,1}_irq_status
29 * Controlling each of the 4 expansion APB PPCs which a system using the IoTKit
31 * + named GPIO outputs apb_ppcexp{0,1,2,3}_nonsec[0..15]
32 * + named GPIO outputs apb_ppcexp{0,1,2,3}_ap[0..15]
33 * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_enable
34 * + named GPIO outputs apb_ppcexp{0,1,2,3}_irq_clear
35 * + named GPIO inputs apb_ppcexp{0,1,2,3}_irq_status
36 * Controlling each of the 4 expansion AHB PPCs which a system using the IoTKit
38 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_nonsec[0..15]
39 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_ap[0..15]
40 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_enable
41 * + named GPIO outputs ahb_ppcexp{0,1,2,3}_irq_clear
42 * + named GPIO inputs ahb_ppcexp{0,1,2,3}_irq_status
43 * Controlling the MPC in the IoTKit:
44 * + named GPIO input mpc_status
45 * Controlling each of the 16 expansion MPCs which a system using the IoTKit
47 * + named GPIO inputs mpcexp_status[0..15]
48 * Controlling each of the 16 expansion MSCs which a system using the IoTKit
50 * + named GPIO inputs mscexp_status[0..15]
51 * + named GPIO outputs mscexp_clear[0..15]
52 * + named GPIO outputs mscexp_ns[0..15]
55 #ifndef IOTKIT_SECCTL_H
56 #define IOTKIT_SECCTL_H
58 #include "hw/sysbus.h"
60 #define TYPE_IOTKIT_SECCTL "iotkit-secctl"
61 #define IOTKIT_SECCTL(obj) OBJECT_CHECK(IoTKitSecCtl, (obj), TYPE_IOTKIT_SECCTL)
63 #define IOTS_APB_PPC0_NUM_PORTS 3
64 #define IOTS_APB_PPC1_NUM_PORTS 1
65 #define IOTS_PPC_NUM_PORTS 16
66 #define IOTS_NUM_APB_PPC 2
67 #define IOTS_NUM_APB_EXP_PPC 4
68 #define IOTS_NUM_AHB_EXP_PPC 4
69 #define IOTS_NUM_EXP_MPC 16
70 #define IOTS_NUM_MPC 1
71 #define IOTS_NUM_EXP_MSC 16
73 typedef struct IoTKitSecCtl IoTKitSecCtl
;
75 /* State and IRQ lines relating to a PPC. For the
76 * PPCs in the IoTKit not all the IRQ lines are used.
78 typedef struct IoTKitSecCtlPPC
{
79 qemu_irq nonsec
[IOTS_PPC_NUM_PORTS
];
80 qemu_irq ap
[IOTS_PPC_NUM_PORTS
];
88 /* Number of ports actually present */
90 /* Offset of this PPC's interrupt bits in SECPPCINTSTAT */
97 SysBusDevice parent_obj
;
100 qemu_irq sec_resp_cfg
;
101 qemu_irq nsc_cfg_irq
;
104 MemoryRegion ns_regs
;
106 uint32_t secppcintstat
;
107 uint32_t secppcinten
;
111 uint32_t mpcintstatus
;
113 uint32_t secmscintstat
;
114 uint32_t secmscinten
;
116 qemu_irq mscexp_clear
[IOTS_NUM_EXP_MSC
];
117 qemu_irq mscexp_ns
[IOTS_NUM_EXP_MSC
];
120 IoTKitSecCtlPPC apb
[IOTS_NUM_APB_PPC
];
121 IoTKitSecCtlPPC apbexp
[IOTS_NUM_APB_EXP_PPC
];
122 IoTKitSecCtlPPC ahbexp
[IOTS_NUM_APB_EXP_PPC
];