vnc: fix unfinalized tlscreds for VncDisplay
[qemu/ar7.git] / hw / pci-host / designware.c
blobf9fb97a3e3b28220fb5c54409789efbfdfbb6864
1 /*
2 * Copyright (c) 2018, Impinj, Inc.
4 * Designware PCIe IP block emulation
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2.1 of the License, or (at your option) any later version.
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with this library; if not, see
18 * <http://www.gnu.org/licenses/>.
21 #include "qemu/osdep.h"
22 #include "qapi/error.h"
23 #include "qemu/module.h"
24 #include "hw/pci/msi.h"
25 #include "hw/pci/pci_bridge.h"
26 #include "hw/pci/pci_host.h"
27 #include "hw/pci/pcie_port.h"
28 #include "hw/qdev-properties.h"
29 #include "migration/vmstate.h"
30 #include "hw/irq.h"
31 #include "hw/pci-host/designware.h"
33 #define DESIGNWARE_PCIE_PORT_LINK_CONTROL 0x710
34 #define DESIGNWARE_PCIE_PHY_DEBUG_R1 0x72C
35 #define DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP BIT(4)
36 #define DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
37 #define DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE BIT(17)
38 #define DESIGNWARE_PCIE_MSI_ADDR_LO 0x820
39 #define DESIGNWARE_PCIE_MSI_ADDR_HI 0x824
40 #define DESIGNWARE_PCIE_MSI_INTR0_ENABLE 0x828
41 #define DESIGNWARE_PCIE_MSI_INTR0_MASK 0x82C
42 #define DESIGNWARE_PCIE_MSI_INTR0_STATUS 0x830
43 #define DESIGNWARE_PCIE_ATU_VIEWPORT 0x900
44 #define DESIGNWARE_PCIE_ATU_REGION_INBOUND BIT(31)
45 #define DESIGNWARE_PCIE_ATU_CR1 0x904
46 #define DESIGNWARE_PCIE_ATU_TYPE_MEM (0x0 << 0)
47 #define DESIGNWARE_PCIE_ATU_CR2 0x908
48 #define DESIGNWARE_PCIE_ATU_ENABLE BIT(31)
49 #define DESIGNWARE_PCIE_ATU_LOWER_BASE 0x90C
50 #define DESIGNWARE_PCIE_ATU_UPPER_BASE 0x910
51 #define DESIGNWARE_PCIE_ATU_LIMIT 0x914
52 #define DESIGNWARE_PCIE_ATU_LOWER_TARGET 0x918
53 #define DESIGNWARE_PCIE_ATU_BUS(x) (((x) >> 24) & 0xff)
54 #define DESIGNWARE_PCIE_ATU_DEVFN(x) (((x) >> 16) & 0xff)
55 #define DESIGNWARE_PCIE_ATU_UPPER_TARGET 0x91C
57 #define DESIGNWARE_PCIE_IRQ_MSI 3
59 static DesignwarePCIEHost *
60 designware_pcie_root_to_host(DesignwarePCIERoot *root)
62 BusState *bus = qdev_get_parent_bus(DEVICE(root));
63 return DESIGNWARE_PCIE_HOST(bus->parent);
66 static void designware_pcie_root_msi_write(void *opaque, hwaddr addr,
67 uint64_t val, unsigned len)
69 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(opaque);
70 DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
72 root->msi.intr[0].status |= BIT(val) & root->msi.intr[0].enable;
74 if (root->msi.intr[0].status & ~root->msi.intr[0].mask) {
75 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 1);
79 static const MemoryRegionOps designware_pci_host_msi_ops = {
80 .write = designware_pcie_root_msi_write,
81 .endianness = DEVICE_LITTLE_ENDIAN,
82 .valid = {
83 .min_access_size = 4,
84 .max_access_size = 4,
88 static void designware_pcie_root_update_msi_mapping(DesignwarePCIERoot *root)
91 MemoryRegion *mem = &root->msi.iomem;
92 const uint64_t base = root->msi.base;
93 const bool enable = root->msi.intr[0].enable;
95 memory_region_set_address(mem, base);
96 memory_region_set_enabled(mem, enable);
99 static DesignwarePCIEViewport *
100 designware_pcie_root_get_current_viewport(DesignwarePCIERoot *root)
102 const unsigned int idx = root->atu_viewport & 0xF;
103 const unsigned int dir =
104 !!(root->atu_viewport & DESIGNWARE_PCIE_ATU_REGION_INBOUND);
105 return &root->viewports[dir][idx];
108 static uint32_t
109 designware_pcie_root_config_read(PCIDevice *d, uint32_t address, int len)
111 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
112 DesignwarePCIEViewport *viewport =
113 designware_pcie_root_get_current_viewport(root);
115 uint32_t val;
117 switch (address) {
118 case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
120 * Linux guest uses this register only to configure number of
121 * PCIE lane (which in our case is irrelevant) and doesn't
122 * really care about the value it reads from this register
124 val = 0xDEADBEEF;
125 break;
127 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
129 * To make sure that any code in guest waiting for speed
130 * change does not time out we always report
131 * PORT_LOGIC_SPEED_CHANGE as set
133 val = DESIGNWARE_PCIE_PORT_LOGIC_SPEED_CHANGE;
134 break;
136 case DESIGNWARE_PCIE_MSI_ADDR_LO:
137 val = root->msi.base;
138 break;
140 case DESIGNWARE_PCIE_MSI_ADDR_HI:
141 val = root->msi.base >> 32;
142 break;
144 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
145 val = root->msi.intr[0].enable;
146 break;
148 case DESIGNWARE_PCIE_MSI_INTR0_MASK:
149 val = root->msi.intr[0].mask;
150 break;
152 case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
153 val = root->msi.intr[0].status;
154 break;
156 case DESIGNWARE_PCIE_PHY_DEBUG_R1:
157 val = DESIGNWARE_PCIE_PHY_DEBUG_R1_XMLH_LINK_UP;
158 break;
160 case DESIGNWARE_PCIE_ATU_VIEWPORT:
161 val = root->atu_viewport;
162 break;
164 case DESIGNWARE_PCIE_ATU_LOWER_BASE:
165 val = viewport->base;
166 break;
168 case DESIGNWARE_PCIE_ATU_UPPER_BASE:
169 val = viewport->base >> 32;
170 break;
172 case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
173 val = viewport->target;
174 break;
176 case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
177 val = viewport->target >> 32;
178 break;
180 case DESIGNWARE_PCIE_ATU_LIMIT:
181 val = viewport->limit;
182 break;
184 case DESIGNWARE_PCIE_ATU_CR1:
185 case DESIGNWARE_PCIE_ATU_CR2:
186 val = viewport->cr[(address - DESIGNWARE_PCIE_ATU_CR1) /
187 sizeof(uint32_t)];
188 break;
190 default:
191 val = pci_default_read_config(d, address, len);
192 break;
195 return val;
198 static uint64_t designware_pcie_root_data_access(void *opaque, hwaddr addr,
199 uint64_t *val, unsigned len)
201 DesignwarePCIEViewport *viewport = opaque;
202 DesignwarePCIERoot *root = viewport->root;
204 const uint8_t busnum = DESIGNWARE_PCIE_ATU_BUS(viewport->target);
205 const uint8_t devfn = DESIGNWARE_PCIE_ATU_DEVFN(viewport->target);
206 PCIBus *pcibus = pci_get_bus(PCI_DEVICE(root));
207 PCIDevice *pcidev = pci_find_device(pcibus, busnum, devfn);
209 if (pcidev) {
210 addr &= pci_config_size(pcidev) - 1;
212 if (val) {
213 pci_host_config_write_common(pcidev, addr,
214 pci_config_size(pcidev),
215 *val, len);
216 } else {
217 return pci_host_config_read_common(pcidev, addr,
218 pci_config_size(pcidev),
219 len);
223 return UINT64_MAX;
226 static uint64_t designware_pcie_root_data_read(void *opaque, hwaddr addr,
227 unsigned len)
229 return designware_pcie_root_data_access(opaque, addr, NULL, len);
232 static void designware_pcie_root_data_write(void *opaque, hwaddr addr,
233 uint64_t val, unsigned len)
235 designware_pcie_root_data_access(opaque, addr, &val, len);
238 static const MemoryRegionOps designware_pci_host_conf_ops = {
239 .read = designware_pcie_root_data_read,
240 .write = designware_pcie_root_data_write,
241 .endianness = DEVICE_LITTLE_ENDIAN,
242 .valid = {
243 .min_access_size = 1,
244 .max_access_size = 4,
248 static void designware_pcie_update_viewport(DesignwarePCIERoot *root,
249 DesignwarePCIEViewport *viewport)
251 const uint64_t target = viewport->target;
252 const uint64_t base = viewport->base;
253 const uint64_t size = (uint64_t)viewport->limit - base + 1;
254 const bool enabled = viewport->cr[1] & DESIGNWARE_PCIE_ATU_ENABLE;
256 MemoryRegion *current, *other;
258 if (viewport->cr[0] == DESIGNWARE_PCIE_ATU_TYPE_MEM) {
259 current = &viewport->mem;
260 other = &viewport->cfg;
261 memory_region_set_alias_offset(current, target);
262 } else {
263 current = &viewport->cfg;
264 other = &viewport->mem;
268 * An outbound viewport can be reconfigure from being MEM to CFG,
269 * to account for that we disable the "other" memory region that
270 * becomes unused due to that fact.
272 memory_region_set_enabled(other, false);
273 if (enabled) {
274 memory_region_set_size(current, size);
275 memory_region_set_address(current, base);
277 memory_region_set_enabled(current, enabled);
280 static void designware_pcie_root_config_write(PCIDevice *d, uint32_t address,
281 uint32_t val, int len)
283 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(d);
284 DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
285 DesignwarePCIEViewport *viewport =
286 designware_pcie_root_get_current_viewport(root);
288 switch (address) {
289 case DESIGNWARE_PCIE_PORT_LINK_CONTROL:
290 case DESIGNWARE_PCIE_LINK_WIDTH_SPEED_CONTROL:
291 case DESIGNWARE_PCIE_PHY_DEBUG_R1:
292 /* No-op */
293 break;
295 case DESIGNWARE_PCIE_MSI_ADDR_LO:
296 root->msi.base &= 0xFFFFFFFF00000000ULL;
297 root->msi.base |= val;
298 designware_pcie_root_update_msi_mapping(root);
299 break;
301 case DESIGNWARE_PCIE_MSI_ADDR_HI:
302 root->msi.base &= 0x00000000FFFFFFFFULL;
303 root->msi.base |= (uint64_t)val << 32;
304 designware_pcie_root_update_msi_mapping(root);
305 break;
307 case DESIGNWARE_PCIE_MSI_INTR0_ENABLE:
308 root->msi.intr[0].enable = val;
309 designware_pcie_root_update_msi_mapping(root);
310 break;
312 case DESIGNWARE_PCIE_MSI_INTR0_MASK:
313 root->msi.intr[0].mask = val;
314 break;
316 case DESIGNWARE_PCIE_MSI_INTR0_STATUS:
317 root->msi.intr[0].status ^= val;
318 if (!root->msi.intr[0].status) {
319 qemu_set_irq(host->pci.irqs[DESIGNWARE_PCIE_IRQ_MSI], 0);
321 break;
323 case DESIGNWARE_PCIE_ATU_VIEWPORT:
324 root->atu_viewport = val;
325 break;
327 case DESIGNWARE_PCIE_ATU_LOWER_BASE:
328 viewport->base &= 0xFFFFFFFF00000000ULL;
329 viewport->base |= val;
330 break;
332 case DESIGNWARE_PCIE_ATU_UPPER_BASE:
333 viewport->base &= 0x00000000FFFFFFFFULL;
334 viewport->base |= (uint64_t)val << 32;
335 break;
337 case DESIGNWARE_PCIE_ATU_LOWER_TARGET:
338 viewport->target &= 0xFFFFFFFF00000000ULL;
339 viewport->target |= val;
340 break;
342 case DESIGNWARE_PCIE_ATU_UPPER_TARGET:
343 viewport->target &= 0x00000000FFFFFFFFULL;
344 viewport->target |= val;
345 break;
347 case DESIGNWARE_PCIE_ATU_LIMIT:
348 viewport->limit = val;
349 break;
351 case DESIGNWARE_PCIE_ATU_CR1:
352 viewport->cr[0] = val;
353 break;
354 case DESIGNWARE_PCIE_ATU_CR2:
355 viewport->cr[1] = val;
356 designware_pcie_update_viewport(root, viewport);
357 break;
359 default:
360 pci_bridge_write_config(d, address, val, len);
361 break;
365 static char *designware_pcie_viewport_name(const char *direction,
366 unsigned int i,
367 const char *type)
369 return g_strdup_printf("PCI %s Viewport %u [%s]",
370 direction, i, type);
373 static void designware_pcie_root_realize(PCIDevice *dev, Error **errp)
375 DesignwarePCIERoot *root = DESIGNWARE_PCIE_ROOT(dev);
376 DesignwarePCIEHost *host = designware_pcie_root_to_host(root);
377 MemoryRegion *address_space = &host->pci.memory;
378 PCIBridge *br = PCI_BRIDGE(dev);
379 DesignwarePCIEViewport *viewport;
381 * Dummy values used for initial configuration of MemoryRegions
382 * that belong to a given viewport
384 const hwaddr dummy_offset = 0;
385 const uint64_t dummy_size = 4;
386 size_t i;
388 br->bus_name = "dw-pcie";
390 pci_set_word(dev->config + PCI_COMMAND,
391 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
393 pci_config_set_interrupt_pin(dev->config, 1);
394 pci_bridge_initfn(dev, TYPE_PCIE_BUS);
396 pcie_port_init_reg(dev);
398 pcie_cap_init(dev, 0x70, PCI_EXP_TYPE_ROOT_PORT,
399 0, &error_fatal);
401 msi_nonbroken = true;
402 msi_init(dev, 0x50, 32, true, true, &error_fatal);
404 for (i = 0; i < DESIGNWARE_PCIE_NUM_VIEWPORTS; i++) {
405 MemoryRegion *source, *destination, *mem;
406 const char *direction;
407 char *name;
409 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][i];
410 viewport->inbound = true;
411 viewport->base = 0x0000000000000000ULL;
412 viewport->target = 0x0000000000000000ULL;
413 viewport->limit = UINT32_MAX;
414 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
416 source = &host->pci.address_space_root;
417 destination = get_system_memory();
418 direction = "Inbound";
421 * Configure MemoryRegion implementing PCI -> CPU memory
422 * access
424 mem = &viewport->mem;
425 name = designware_pcie_viewport_name(direction, i, "MEM");
426 memory_region_init_alias(mem, OBJECT(root), name, destination,
427 dummy_offset, dummy_size);
428 memory_region_add_subregion_overlap(source, dummy_offset, mem, -1);
429 memory_region_set_enabled(mem, false);
430 g_free(name);
432 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_OUTBOUND][i];
433 viewport->root = root;
434 viewport->inbound = false;
435 viewport->base = 0x0000000000000000ULL;
436 viewport->target = 0x0000000000000000ULL;
437 viewport->limit = UINT32_MAX;
438 viewport->cr[0] = DESIGNWARE_PCIE_ATU_TYPE_MEM;
440 destination = &host->pci.memory;
441 direction = "Outbound";
442 source = get_system_memory();
445 * Configure MemoryRegion implementing CPU -> PCI memory
446 * access
448 mem = &viewport->mem;
449 name = designware_pcie_viewport_name(direction, i, "MEM");
450 memory_region_init_alias(mem, OBJECT(root), name, destination,
451 dummy_offset, dummy_size);
452 memory_region_add_subregion(source, dummy_offset, mem);
453 memory_region_set_enabled(mem, false);
454 g_free(name);
457 * Configure MemoryRegion implementing access to configuration
458 * space
460 mem = &viewport->cfg;
461 name = designware_pcie_viewport_name(direction, i, "CFG");
462 memory_region_init_io(&viewport->cfg, OBJECT(root),
463 &designware_pci_host_conf_ops,
464 viewport, name, dummy_size);
465 memory_region_add_subregion(source, dummy_offset, mem);
466 memory_region_set_enabled(mem, false);
467 g_free(name);
471 * If no inbound iATU windows are configured, HW defaults to
472 * letting inbound TLPs to pass in. We emulate that by exlicitly
473 * configuring first inbound window to cover all of target's
474 * address space.
476 * NOTE: This will not work correctly for the case when first
477 * configured inbound window is window 0
479 viewport = &root->viewports[DESIGNWARE_PCIE_VIEWPORT_INBOUND][0];
480 viewport->cr[1] = DESIGNWARE_PCIE_ATU_ENABLE;
481 designware_pcie_update_viewport(root, viewport);
483 memory_region_init_io(&root->msi.iomem, OBJECT(root),
484 &designware_pci_host_msi_ops,
485 root, "pcie-msi", 0x4);
487 * We initially place MSI interrupt I/O region a adress 0 and
488 * disable it. It'll be later moved to correct offset and enabled
489 * in designware_pcie_root_update_msi_mapping() as a part of
490 * initialization done by guest OS
492 memory_region_add_subregion(address_space, dummy_offset, &root->msi.iomem);
493 memory_region_set_enabled(&root->msi.iomem, false);
496 static void designware_pcie_set_irq(void *opaque, int irq_num, int level)
498 DesignwarePCIEHost *host = DESIGNWARE_PCIE_HOST(opaque);
500 qemu_set_irq(host->pci.irqs[irq_num], level);
503 static const char *
504 designware_pcie_host_root_bus_path(PCIHostState *host_bridge, PCIBus *rootbus)
506 return "0000:00";
509 static const VMStateDescription vmstate_designware_pcie_msi_bank = {
510 .name = "designware-pcie-msi-bank",
511 .version_id = 1,
512 .minimum_version_id = 1,
513 .fields = (VMStateField[]) {
514 VMSTATE_UINT32(enable, DesignwarePCIEMSIBank),
515 VMSTATE_UINT32(mask, DesignwarePCIEMSIBank),
516 VMSTATE_UINT32(status, DesignwarePCIEMSIBank),
517 VMSTATE_END_OF_LIST()
521 static const VMStateDescription vmstate_designware_pcie_msi = {
522 .name = "designware-pcie-msi",
523 .version_id = 1,
524 .minimum_version_id = 1,
525 .fields = (VMStateField[]) {
526 VMSTATE_UINT64(base, DesignwarePCIEMSI),
527 VMSTATE_STRUCT_ARRAY(intr,
528 DesignwarePCIEMSI,
529 DESIGNWARE_PCIE_NUM_MSI_BANKS,
531 vmstate_designware_pcie_msi_bank,
532 DesignwarePCIEMSIBank),
533 VMSTATE_END_OF_LIST()
537 static const VMStateDescription vmstate_designware_pcie_viewport = {
538 .name = "designware-pcie-viewport",
539 .version_id = 1,
540 .minimum_version_id = 1,
541 .fields = (VMStateField[]) {
542 VMSTATE_UINT64(base, DesignwarePCIEViewport),
543 VMSTATE_UINT64(target, DesignwarePCIEViewport),
544 VMSTATE_UINT32(limit, DesignwarePCIEViewport),
545 VMSTATE_UINT32_ARRAY(cr, DesignwarePCIEViewport, 2),
546 VMSTATE_END_OF_LIST()
550 static const VMStateDescription vmstate_designware_pcie_root = {
551 .name = "designware-pcie-root",
552 .version_id = 1,
553 .minimum_version_id = 1,
554 .fields = (VMStateField[]) {
555 VMSTATE_PCI_DEVICE(parent_obj, PCIBridge),
556 VMSTATE_UINT32(atu_viewport, DesignwarePCIERoot),
557 VMSTATE_STRUCT_2DARRAY(viewports,
558 DesignwarePCIERoot,
560 DESIGNWARE_PCIE_NUM_VIEWPORTS,
562 vmstate_designware_pcie_viewport,
563 DesignwarePCIEViewport),
564 VMSTATE_STRUCT(msi,
565 DesignwarePCIERoot,
567 vmstate_designware_pcie_msi,
568 DesignwarePCIEMSI),
569 VMSTATE_END_OF_LIST()
573 static void designware_pcie_root_class_init(ObjectClass *klass, void *data)
575 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
576 DeviceClass *dc = DEVICE_CLASS(klass);
578 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
580 k->vendor_id = PCI_VENDOR_ID_SYNOPSYS;
581 k->device_id = 0xABCD;
582 k->revision = 0;
583 k->class_id = PCI_CLASS_BRIDGE_PCI;
584 k->is_bridge = true;
585 k->exit = pci_bridge_exitfn;
586 k->realize = designware_pcie_root_realize;
587 k->config_read = designware_pcie_root_config_read;
588 k->config_write = designware_pcie_root_config_write;
590 dc->reset = pci_bridge_reset;
592 * PCI-facing part of the host bridge, not usable without the
593 * host-facing part, which can't be device_add'ed, yet.
595 dc->user_creatable = false;
596 dc->vmsd = &vmstate_designware_pcie_root;
599 static uint64_t designware_pcie_host_mmio_read(void *opaque, hwaddr addr,
600 unsigned int size)
602 PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
603 PCIDevice *device = pci_find_device(pci->bus, 0, 0);
605 return pci_host_config_read_common(device,
606 addr,
607 pci_config_size(device),
608 size);
611 static void designware_pcie_host_mmio_write(void *opaque, hwaddr addr,
612 uint64_t val, unsigned int size)
614 PCIHostState *pci = PCI_HOST_BRIDGE(opaque);
615 PCIDevice *device = pci_find_device(pci->bus, 0, 0);
617 return pci_host_config_write_common(device,
618 addr,
619 pci_config_size(device),
620 val, size);
623 static const MemoryRegionOps designware_pci_mmio_ops = {
624 .read = designware_pcie_host_mmio_read,
625 .write = designware_pcie_host_mmio_write,
626 .endianness = DEVICE_LITTLE_ENDIAN,
627 .impl = {
629 * Our device would not work correctly if the guest was doing
630 * unaligned access. This might not be a limitation on the real
631 * device but in practice there is no reason for a guest to access
632 * this device unaligned.
634 .min_access_size = 4,
635 .max_access_size = 4,
636 .unaligned = false,
640 static AddressSpace *designware_pcie_host_set_iommu(PCIBus *bus, void *opaque,
641 int devfn)
643 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(opaque);
645 return &s->pci.address_space;
648 static void designware_pcie_host_realize(DeviceState *dev, Error **errp)
650 PCIHostState *pci = PCI_HOST_BRIDGE(dev);
651 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(dev);
652 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
653 size_t i;
655 for (i = 0; i < ARRAY_SIZE(s->pci.irqs); i++) {
656 sysbus_init_irq(sbd, &s->pci.irqs[i]);
659 memory_region_init_io(&s->mmio,
660 OBJECT(s),
661 &designware_pci_mmio_ops,
663 "pcie.reg", 4 * 1024);
664 sysbus_init_mmio(sbd, &s->mmio);
666 memory_region_init(&s->pci.io, OBJECT(s), "pcie-pio", 16);
667 memory_region_init(&s->pci.memory, OBJECT(s),
668 "pcie-bus-memory",
669 UINT64_MAX);
671 pci->bus = pci_register_root_bus(dev, "pcie",
672 designware_pcie_set_irq,
673 pci_swizzle_map_irq_fn,
675 &s->pci.memory,
676 &s->pci.io,
677 0, 4,
678 TYPE_PCIE_BUS);
680 memory_region_init(&s->pci.address_space_root,
681 OBJECT(s),
682 "pcie-bus-address-space-root",
683 UINT64_MAX);
684 memory_region_add_subregion(&s->pci.address_space_root,
685 0x0, &s->pci.memory);
686 address_space_init(&s->pci.address_space,
687 &s->pci.address_space_root,
688 "pcie-bus-address-space");
689 pci_setup_iommu(pci->bus, designware_pcie_host_set_iommu, s);
691 qdev_realize(DEVICE(&s->root), BUS(pci->bus), &error_fatal);
694 static const VMStateDescription vmstate_designware_pcie_host = {
695 .name = "designware-pcie-host",
696 .version_id = 1,
697 .minimum_version_id = 1,
698 .fields = (VMStateField[]) {
699 VMSTATE_STRUCT(root,
700 DesignwarePCIEHost,
702 vmstate_designware_pcie_root,
703 DesignwarePCIERoot),
704 VMSTATE_END_OF_LIST()
708 static void designware_pcie_host_class_init(ObjectClass *klass, void *data)
710 DeviceClass *dc = DEVICE_CLASS(klass);
711 PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
713 hc->root_bus_path = designware_pcie_host_root_bus_path;
714 dc->realize = designware_pcie_host_realize;
715 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
716 dc->fw_name = "pci";
717 dc->vmsd = &vmstate_designware_pcie_host;
720 static void designware_pcie_host_init(Object *obj)
722 DesignwarePCIEHost *s = DESIGNWARE_PCIE_HOST(obj);
723 DesignwarePCIERoot *root = &s->root;
725 object_initialize_child(obj, "root", root, TYPE_DESIGNWARE_PCIE_ROOT);
726 qdev_prop_set_int32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
727 qdev_prop_set_bit(DEVICE(root), "multifunction", false);
730 static const TypeInfo designware_pcie_root_info = {
731 .name = TYPE_DESIGNWARE_PCIE_ROOT,
732 .parent = TYPE_PCI_BRIDGE,
733 .instance_size = sizeof(DesignwarePCIERoot),
734 .class_init = designware_pcie_root_class_init,
735 .interfaces = (InterfaceInfo[]) {
736 { INTERFACE_PCIE_DEVICE },
741 static const TypeInfo designware_pcie_host_info = {
742 .name = TYPE_DESIGNWARE_PCIE_HOST,
743 .parent = TYPE_PCI_HOST_BRIDGE,
744 .instance_size = sizeof(DesignwarePCIEHost),
745 .instance_init = designware_pcie_host_init,
746 .class_init = designware_pcie_host_class_init,
749 static void designware_pcie_register(void)
751 type_register_static(&designware_pcie_root_info);
752 type_register_static(&designware_pcie_host_info);
754 type_init(designware_pcie_register)