cleanup useless return sentence
[qemu/ar7.git] / hw / sh_timer.c
blob64bf604ba4986e14ca2f7d80978e679499549d89
1 /*
2 * SuperH Timer modules.
4 * Copyright (c) 2007 Magnus Damm
5 * Based on arm_timer.c by Paul Brook
6 * Copyright (c) 2005-2006 CodeSourcery.
8 * This code is licensed under the GPL.
9 */
11 #include "hw.h"
12 #include "sh.h"
13 #include "qemu-timer.h"
14 #include "exec-memory.h"
15 #include "ptimer.h"
17 //#define DEBUG_TIMER
19 #define TIMER_TCR_TPSC (7 << 0)
20 #define TIMER_TCR_CKEG (3 << 3)
21 #define TIMER_TCR_UNIE (1 << 5)
22 #define TIMER_TCR_ICPE (3 << 6)
23 #define TIMER_TCR_UNF (1 << 8)
24 #define TIMER_TCR_ICPF (1 << 9)
25 #define TIMER_TCR_RESERVED (0x3f << 10)
27 #define TIMER_FEAT_CAPT (1 << 0)
28 #define TIMER_FEAT_EXTCLK (1 << 1)
30 #define OFFSET_TCOR 0
31 #define OFFSET_TCNT 1
32 #define OFFSET_TCR 2
33 #define OFFSET_TCPR 3
35 typedef struct {
36 ptimer_state *timer;
37 uint32_t tcnt;
38 uint32_t tcor;
39 uint32_t tcr;
40 uint32_t tcpr;
41 int freq;
42 int int_level;
43 int old_level;
44 int feat;
45 int enabled;
46 qemu_irq irq;
47 } sh_timer_state;
49 /* Check all active timers, and schedule the next timer interrupt. */
51 static void sh_timer_update(sh_timer_state *s)
53 int new_level = s->int_level && (s->tcr & TIMER_TCR_UNIE);
55 if (new_level != s->old_level)
56 qemu_set_irq (s->irq, new_level);
58 s->old_level = s->int_level;
59 s->int_level = new_level;
62 static uint32_t sh_timer_read(void *opaque, target_phys_addr_t offset)
64 sh_timer_state *s = (sh_timer_state *)opaque;
66 switch (offset >> 2) {
67 case OFFSET_TCOR:
68 return s->tcor;
69 case OFFSET_TCNT:
70 return ptimer_get_count(s->timer);
71 case OFFSET_TCR:
72 return s->tcr | (s->int_level ? TIMER_TCR_UNF : 0);
73 case OFFSET_TCPR:
74 if (s->feat & TIMER_FEAT_CAPT)
75 return s->tcpr;
76 default:
77 hw_error("sh_timer_read: Bad offset %x\n", (int)offset);
78 return 0;
82 static void sh_timer_write(void *opaque, target_phys_addr_t offset,
83 uint32_t value)
85 sh_timer_state *s = (sh_timer_state *)opaque;
86 int freq;
88 switch (offset >> 2) {
89 case OFFSET_TCOR:
90 s->tcor = value;
91 ptimer_set_limit(s->timer, s->tcor, 0);
92 break;
93 case OFFSET_TCNT:
94 s->tcnt = value;
95 ptimer_set_count(s->timer, s->tcnt);
96 break;
97 case OFFSET_TCR:
98 if (s->enabled) {
99 /* Pause the timer if it is running. This may cause some
100 inaccuracy dure to rounding, but avoids a whole lot of other
101 messyness. */
102 ptimer_stop(s->timer);
104 freq = s->freq;
105 /* ??? Need to recalculate expiry time after changing divisor. */
106 switch (value & TIMER_TCR_TPSC) {
107 case 0: freq >>= 2; break;
108 case 1: freq >>= 4; break;
109 case 2: freq >>= 6; break;
110 case 3: freq >>= 8; break;
111 case 4: freq >>= 10; break;
112 case 6:
113 case 7: if (s->feat & TIMER_FEAT_EXTCLK) break;
114 default: hw_error("sh_timer_write: Reserved TPSC value\n"); break;
116 switch ((value & TIMER_TCR_CKEG) >> 3) {
117 case 0: break;
118 case 1:
119 case 2:
120 case 3: if (s->feat & TIMER_FEAT_EXTCLK) break;
121 default: hw_error("sh_timer_write: Reserved CKEG value\n"); break;
123 switch ((value & TIMER_TCR_ICPE) >> 6) {
124 case 0: break;
125 case 2:
126 case 3: if (s->feat & TIMER_FEAT_CAPT) break;
127 default: hw_error("sh_timer_write: Reserved ICPE value\n"); break;
129 if ((value & TIMER_TCR_UNF) == 0)
130 s->int_level = 0;
132 value &= ~TIMER_TCR_UNF;
134 if ((value & TIMER_TCR_ICPF) && (!(s->feat & TIMER_FEAT_CAPT)))
135 hw_error("sh_timer_write: Reserved ICPF value\n");
137 value &= ~TIMER_TCR_ICPF; /* capture not supported */
139 if (value & TIMER_TCR_RESERVED)
140 hw_error("sh_timer_write: Reserved TCR bits set\n");
141 s->tcr = value;
142 ptimer_set_limit(s->timer, s->tcor, 0);
143 ptimer_set_freq(s->timer, freq);
144 if (s->enabled) {
145 /* Restart the timer if still enabled. */
146 ptimer_run(s->timer, 0);
148 break;
149 case OFFSET_TCPR:
150 if (s->feat & TIMER_FEAT_CAPT) {
151 s->tcpr = value;
152 break;
154 default:
155 hw_error("sh_timer_write: Bad offset %x\n", (int)offset);
157 sh_timer_update(s);
160 static void sh_timer_start_stop(void *opaque, int enable)
162 sh_timer_state *s = (sh_timer_state *)opaque;
164 #ifdef DEBUG_TIMER
165 printf("sh_timer_start_stop %d (%d)\n", enable, s->enabled);
166 #endif
168 if (s->enabled && !enable) {
169 ptimer_stop(s->timer);
171 if (!s->enabled && enable) {
172 ptimer_run(s->timer, 0);
174 s->enabled = !!enable;
176 #ifdef DEBUG_TIMER
177 printf("sh_timer_start_stop done %d\n", s->enabled);
178 #endif
181 static void sh_timer_tick(void *opaque)
183 sh_timer_state *s = (sh_timer_state *)opaque;
184 s->int_level = s->enabled;
185 sh_timer_update(s);
188 static void *sh_timer_init(uint32_t freq, int feat, qemu_irq irq)
190 sh_timer_state *s;
191 QEMUBH *bh;
193 s = (sh_timer_state *)g_malloc0(sizeof(sh_timer_state));
194 s->freq = freq;
195 s->feat = feat;
196 s->tcor = 0xffffffff;
197 s->tcnt = 0xffffffff;
198 s->tcpr = 0xdeadbeef;
199 s->tcr = 0;
200 s->enabled = 0;
201 s->irq = irq;
203 bh = qemu_bh_new(sh_timer_tick, s);
204 s->timer = ptimer_init(bh);
206 sh_timer_write(s, OFFSET_TCOR >> 2, s->tcor);
207 sh_timer_write(s, OFFSET_TCNT >> 2, s->tcnt);
208 sh_timer_write(s, OFFSET_TCPR >> 2, s->tcpr);
209 sh_timer_write(s, OFFSET_TCR >> 2, s->tcpr);
210 /* ??? Save/restore. */
211 return s;
214 typedef struct {
215 MemoryRegion iomem;
216 MemoryRegion iomem_p4;
217 MemoryRegion iomem_a7;
218 void *timer[3];
219 int level[3];
220 uint32_t tocr;
221 uint32_t tstr;
222 int feat;
223 } tmu012_state;
225 static uint64_t tmu012_read(void *opaque, target_phys_addr_t offset,
226 unsigned size)
228 tmu012_state *s = (tmu012_state *)opaque;
230 #ifdef DEBUG_TIMER
231 printf("tmu012_read 0x%lx\n", (unsigned long) offset);
232 #endif
234 if (offset >= 0x20) {
235 if (!(s->feat & TMU012_FEAT_3CHAN))
236 hw_error("tmu012_write: Bad channel offset %x\n", (int)offset);
237 return sh_timer_read(s->timer[2], offset - 0x20);
240 if (offset >= 0x14)
241 return sh_timer_read(s->timer[1], offset - 0x14);
243 if (offset >= 0x08)
244 return sh_timer_read(s->timer[0], offset - 0x08);
246 if (offset == 4)
247 return s->tstr;
249 if ((s->feat & TMU012_FEAT_TOCR) && offset == 0)
250 return s->tocr;
252 hw_error("tmu012_write: Bad offset %x\n", (int)offset);
253 return 0;
256 static void tmu012_write(void *opaque, target_phys_addr_t offset,
257 uint64_t value, unsigned size)
259 tmu012_state *s = (tmu012_state *)opaque;
261 #ifdef DEBUG_TIMER
262 printf("tmu012_write 0x%lx 0x%08x\n", (unsigned long) offset, value);
263 #endif
265 if (offset >= 0x20) {
266 if (!(s->feat & TMU012_FEAT_3CHAN))
267 hw_error("tmu012_write: Bad channel offset %x\n", (int)offset);
268 sh_timer_write(s->timer[2], offset - 0x20, value);
269 return;
272 if (offset >= 0x14) {
273 sh_timer_write(s->timer[1], offset - 0x14, value);
274 return;
277 if (offset >= 0x08) {
278 sh_timer_write(s->timer[0], offset - 0x08, value);
279 return;
282 if (offset == 4) {
283 sh_timer_start_stop(s->timer[0], value & (1 << 0));
284 sh_timer_start_stop(s->timer[1], value & (1 << 1));
285 if (s->feat & TMU012_FEAT_3CHAN)
286 sh_timer_start_stop(s->timer[2], value & (1 << 2));
287 else
288 if (value & (1 << 2))
289 hw_error("tmu012_write: Bad channel\n");
291 s->tstr = value;
292 return;
295 if ((s->feat & TMU012_FEAT_TOCR) && offset == 0) {
296 s->tocr = value & (1 << 0);
300 static const MemoryRegionOps tmu012_ops = {
301 .read = tmu012_read,
302 .write = tmu012_write,
303 .endianness = DEVICE_NATIVE_ENDIAN,
306 void tmu012_init(MemoryRegion *sysmem, target_phys_addr_t base,
307 int feat, uint32_t freq,
308 qemu_irq ch0_irq, qemu_irq ch1_irq,
309 qemu_irq ch2_irq0, qemu_irq ch2_irq1)
311 tmu012_state *s;
312 int timer_feat = (feat & TMU012_FEAT_EXTCLK) ? TIMER_FEAT_EXTCLK : 0;
314 s = (tmu012_state *)g_malloc0(sizeof(tmu012_state));
315 s->feat = feat;
316 s->timer[0] = sh_timer_init(freq, timer_feat, ch0_irq);
317 s->timer[1] = sh_timer_init(freq, timer_feat, ch1_irq);
318 if (feat & TMU012_FEAT_3CHAN)
319 s->timer[2] = sh_timer_init(freq, timer_feat | TIMER_FEAT_CAPT,
320 ch2_irq0); /* ch2_irq1 not supported */
322 memory_region_init_io(&s->iomem, &tmu012_ops, s,
323 "timer", 0x100000000ULL);
325 memory_region_init_alias(&s->iomem_p4, "timer-p4",
326 &s->iomem, 0, 0x1000);
327 memory_region_add_subregion(sysmem, P4ADDR(base), &s->iomem_p4);
329 memory_region_init_alias(&s->iomem_a7, "timer-a7",
330 &s->iomem, 0, 0x1000);
331 memory_region_add_subregion(sysmem, A7ADDR(base), &s->iomem_a7);
332 /* ??? Save/restore. */