hw/isa/vt82c686.c

   1 /*
   2  * VT82C686B south bridge support
   3  *
   4  * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
   5  * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
   6  * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
   7  * This code is licensed under the GNU GPL v2.
   8  *
   9  * Contributions after 2012-01-13 are licensed under the terms of the
  10  * GNU GPL, version 2 or (at your option) any later version.
  11  */
  12
  13 #include "qemu/osdep.h"
  14 #include "hw/hw.h"
  15 #include "hw/i386/pc.h"
  16 #include "hw/isa/vt82c686.h"
  17 #include "hw/i2c/i2c.h"
  18 #include "hw/i2c/smbus.h"
  19 #include "hw/pci/pci.h"
  20 #include "hw/isa/isa.h"
  21 #include "hw/sysbus.h"
  22 #include "hw/mips/mips.h"
  23 #include "hw/isa/apm.h"
  24 #include "hw/acpi/acpi.h"
  25 #include "hw/i2c/pm_smbus.h"
  26 #include "sysemu/sysemu.h"
  27 #include "qemu/timer.h"
  28 #include "exec/address-spaces.h"
  29
  30 //#define DEBUG_VT82C686B
  31
  32 #ifdef DEBUG_VT82C686B
  33 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
  34 #else
  35 #define DPRINTF(fmt, ...)
  36 #endif
  37
  38 typedef struct SuperIOConfig
  39 {
  40     uint8_t config[0x100];
  41     uint8_t index;
  42     uint8_t data;
  43 } SuperIOConfig;
  44
  45 typedef struct VT82C686BState {
  46     PCIDevice dev;
  47     MemoryRegion superio;
  48     SuperIOConfig superio_conf;
  49 } VT82C686BState;
  50
  51 #define TYPE_VT82C686B_DEVICE "VT82C686B"
  52 #define VT82C686B_DEVICE(obj) \
  53     OBJECT_CHECK(VT82C686BState, (obj), TYPE_VT82C686B_DEVICE)
  54
  55 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
  56                                   unsigned size)
  57 {
  58     SuperIOConfig *superio_conf = opaque;
  59
  60     DPRINTF("superio_ioport_writeb  address 0x%x  val 0x%x\n", addr, data);
  61     if (addr == 0x3f0) {
  62         superio_conf->index = data & 0xff;
  63     } else {
  64         bool can_write = true;
  65         /* 0x3f1 */
  66         switch (superio_conf->index) {
  67         case 0x00 ... 0xdf:
  68         case 0xe4:
  69         case 0xe5:
  70         case 0xe9 ... 0xed:
  71         case 0xf3:
  72         case 0xf5:
  73         case 0xf7:
  74         case 0xf9 ... 0xfb:
  75         case 0xfd ... 0xff:
  76             can_write = false;
  77             break;
  78         case 0xe7:
  79             if ((data & 0xff) != 0xfe) {
  80                 DPRINTF("change uart 1 base. unsupported yet\n");
  81                 can_write = false;
  82             }
  83             break;
  84         case 0xe8:
  85             if ((data & 0xff) != 0xbe) {
  86                 DPRINTF("change uart 2 base. unsupported yet\n");
  87                 can_write = false;
  88             }
  89             break;
  90         default:
  91             break;
  92
  93         }
  94         if (can_write) {
  95             superio_conf->config[superio_conf->index] = data & 0xff;
  96         }
  97     }
  98 }
  99
 100 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
 101 {
 102     SuperIOConfig *superio_conf = opaque;
 103
 104     DPRINTF("superio_ioport_readb  address 0x%x\n", addr);
 105     return (superio_conf->config[superio_conf->index]);
 106 }
 107
 108 static const MemoryRegionOps superio_ops = {
 109     .read = superio_ioport_readb,
 110     .write = superio_ioport_writeb,
 111     .endianness = DEVICE_NATIVE_ENDIAN,
 112     .impl = {
 113         .min_access_size = 1,
 114         .max_access_size = 1,
 115     },
 116 };
 117
 118 static void vt82c686b_reset(void * opaque)
 119 {
 120     PCIDevice *d = opaque;
 121     uint8_t *pci_conf = d->config;
 122     VT82C686BState *vt82c = VT82C686B_DEVICE(d);
 123
 124     pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
 125     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
 126                  PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
 127     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
 128
 129     pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
 130     pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
 131     pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
 132     pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
 133     pci_conf[0x59] = 0x04;
 134     pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
 135     pci_conf[0x5f] = 0x04;
 136     pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
 137
 138     vt82c->superio_conf.config[0xe0] = 0x3c;
 139     vt82c->superio_conf.config[0xe2] = 0x03;
 140     vt82c->superio_conf.config[0xe3] = 0xfc;
 141     vt82c->superio_conf.config[0xe6] = 0xde;
 142     vt82c->superio_conf.config[0xe7] = 0xfe;
 143     vt82c->superio_conf.config[0xe8] = 0xbe;
 144 }
 145
 146 /* write config pci function0 registers. PCI-ISA bridge */
 147 static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
 148                                    uint32_t val, int len)
 149 {
 150     VT82C686BState *vt686 = VT82C686B_DEVICE(d);
 151
 152     DPRINTF("vt82c686b_write_config  address 0x%x  val 0x%x len 0x%x\n",
 153            address, val, len);
 154
 155     pci_default_write_config(d, address, val, len);
 156     if (address == 0x85) {  /* enable or disable super IO configure */
 157         memory_region_set_enabled(&vt686->superio, val & 0x2);
 158     }
 159 }
 160
 161 #define ACPI_DBG_IO_ADDR  0xb044
 162
 163 typedef struct VT686PMState {
 164     PCIDevice dev;
 165     MemoryRegion io;
 166     ACPIREGS ar;
 167     APMState apm;
 168     PMSMBus smb;
 169     uint32_t smb_io_base;
 170 } VT686PMState;
 171
 172 typedef struct VT686AC97State {
 173     PCIDevice dev;
 174 } VT686AC97State;
 175
 176 typedef struct VT686MC97State {
 177     PCIDevice dev;
 178 } VT686MC97State;
 179
 180 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM"
 181 #define VT82C686B_PM_DEVICE(obj) \
 182     OBJECT_CHECK(VT686PMState, (obj), TYPE_VT82C686B_PM_DEVICE)
 183
 184 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97"
 185 #define VT82C686B_MC97_DEVICE(obj) \
 186     OBJECT_CHECK(VT686MC97State, (obj), TYPE_VT82C686B_MC97_DEVICE)
 187
 188 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97"
 189 #define VT82C686B_AC97_DEVICE(obj) \
 190     OBJECT_CHECK(VT686AC97State, (obj), TYPE_VT82C686B_AC97_DEVICE)
 191
 192 static void pm_update_sci(VT686PMState *s)
 193 {
 194     int sci_level, pmsts;
 195
 196     pmsts = acpi_pm1_evt_get_sts(&s->ar);
 197     sci_level = (((pmsts & s->ar.pm1.evt.en) &
 198                   (ACPI_BITMASK_RT_CLOCK_ENABLE |
 199                    ACPI_BITMASK_POWER_BUTTON_ENABLE |
 200                    ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
 201                    ACPI_BITMASK_TIMER_ENABLE)) != 0);
 202     pci_set_irq(&s->dev, sci_level);
 203     /* schedule a timer interruption if needed */
 204     acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
 205                        !(pmsts & ACPI_BITMASK_TIMER_STATUS));
 206 }
 207
 208 static void pm_tmr_timer(ACPIREGS *ar)
 209 {
 210     VT686PMState *s = container_of(ar, VT686PMState, ar);
 211     pm_update_sci(s);
 212 }
 213
 214 static void pm_io_space_update(VT686PMState *s)
 215 {
 216     uint32_t pm_io_base;
 217
 218     pm_io_base = pci_get_long(s->dev.config + 0x40);
 219     pm_io_base &= 0xffc0;
 220
 221     memory_region_transaction_begin();
 222     memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
 223     memory_region_set_address(&s->io, pm_io_base);
 224     memory_region_transaction_commit();
 225 }
 226
 227 static void pm_write_config(PCIDevice *d,
 228                             uint32_t address, uint32_t val, int len)
 229 {
 230     DPRINTF("pm_write_config  address 0x%x  val 0x%x len 0x%x\n",
 231            address, val, len);
 232     pci_default_write_config(d, address, val, len);
 233 }
 234
 235 static int vmstate_acpi_post_load(void *opaque, int version_id)
 236 {
 237     VT686PMState *s = opaque;
 238
 239     pm_io_space_update(s);
 240     return 0;
 241 }
 242
 243 static const VMStateDescription vmstate_acpi = {
 244     .name = "vt82c686b_pm",
 245     .version_id = 1,
 246     .minimum_version_id = 1,
 247     .post_load = vmstate_acpi_post_load,
 248     .fields = (VMStateField[]) {
 249         VMSTATE_PCI_DEVICE(dev, VT686PMState),
 250         VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
 251         VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
 252         VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
 253         VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
 254         VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState),
 255         VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
 256         VMSTATE_END_OF_LIST()
 257     }
 258 };
 259
 260 /*
 261  * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
 262  * just register a PCI device now, functionalities will be implemented later.
 263  */
 264
 265 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp)
 266 {
 267     VT686AC97State *s = VT82C686B_AC97_DEVICE(dev);
 268     uint8_t *pci_conf = s->dev.config;
 269
 270     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
 271                  PCI_COMMAND_PARITY);
 272     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
 273                  PCI_STATUS_DEVSEL_MEDIUM);
 274     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
 275 }
 276
 277 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
 278 {
 279     PCIDevice *dev;
 280
 281     dev = pci_create(bus, devfn, TYPE_VT82C686B_AC97_DEVICE);
 282     qdev_init_nofail(&dev->qdev);
 283 }
 284
 285 static void via_ac97_class_init(ObjectClass *klass, void *data)
 286 {
 287     DeviceClass *dc = DEVICE_CLASS(klass);
 288     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 289
 290     k->realize = vt82c686b_ac97_realize;
 291     k->vendor_id = PCI_VENDOR_ID_VIA;
 292     k->device_id = PCI_DEVICE_ID_VIA_AC97;
 293     k->revision = 0x50;
 294     k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
 295     set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
 296     dc->desc = "AC97";
 297 }
 298
 299 static const TypeInfo via_ac97_info = {
 300     .name          = TYPE_VT82C686B_AC97_DEVICE,
 301     .parent        = TYPE_PCI_DEVICE,
 302     .instance_size = sizeof(VT686AC97State),
 303     .class_init    = via_ac97_class_init,
 304 };
 305
 306 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp)
 307 {
 308     VT686MC97State *s = VT82C686B_MC97_DEVICE(dev);
 309     uint8_t *pci_conf = s->dev.config;
 310
 311     pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
 312                  PCI_COMMAND_VGA_PALETTE);
 313     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
 314     pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
 315 }
 316
 317 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
 318 {
 319     PCIDevice *dev;
 320
 321     dev = pci_create(bus, devfn, TYPE_VT82C686B_MC97_DEVICE);
 322     qdev_init_nofail(&dev->qdev);
 323 }
 324
 325 static void via_mc97_class_init(ObjectClass *klass, void *data)
 326 {
 327     DeviceClass *dc = DEVICE_CLASS(klass);
 328     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 329
 330     k->realize = vt82c686b_mc97_realize;
 331     k->vendor_id = PCI_VENDOR_ID_VIA;
 332     k->device_id = PCI_DEVICE_ID_VIA_MC97;
 333     k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
 334     k->revision = 0x30;
 335     set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
 336     dc->desc = "MC97";
 337 }
 338
 339 static const TypeInfo via_mc97_info = {
 340     .name          = TYPE_VT82C686B_MC97_DEVICE,
 341     .parent        = TYPE_PCI_DEVICE,
 342     .instance_size = sizeof(VT686MC97State),
 343     .class_init    = via_mc97_class_init,
 344 };
 345
 346 /* vt82c686 pm init */
 347 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
 348 {
 349     VT686PMState *s = VT82C686B_PM_DEVICE(dev);
 350     uint8_t *pci_conf;
 351
 352     pci_conf = s->dev.config;
 353     pci_set_word(pci_conf + PCI_COMMAND, 0);
 354     pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
 355                  PCI_STATUS_DEVSEL_MEDIUM);
 356
 357     /* 0x48-0x4B is Power Management I/O Base */
 358     pci_set_long(pci_conf + 0x48, 0x00000001);
 359
 360     /* SMB ports:0xeee0~0xeeef */
 361     s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);
 362     pci_conf[0x90] = s->smb_io_base | 1;
 363     pci_conf[0x91] = s->smb_io_base >> 8;
 364     pci_conf[0xd2] = 0x90;
 365     pm_smbus_init(&s->dev.qdev, &s->smb);
 366     memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
 367
 368     apm_init(dev, &s->apm, NULL, s);
 369
 370     memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
 371     memory_region_set_enabled(&s->io, false);
 372     memory_region_add_subregion(get_system_io(), 0, &s->io);
 373
 374     acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
 375     acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
 376     acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2);
 377 }
 378
 379 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
 380                           qemu_irq sci_irq)
 381 {
 382     PCIDevice *dev;
 383     VT686PMState *s;
 384
 385     dev = pci_create(bus, devfn, TYPE_VT82C686B_PM_DEVICE);
 386     qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
 387
 388     s = VT82C686B_PM_DEVICE(dev);
 389
 390     qdev_init_nofail(&dev->qdev);
 391
 392     return s->smb.smbus;
 393 }
 394
 395 static Property via_pm_properties[] = {
 396     DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
 397     DEFINE_PROP_END_OF_LIST(),
 398 };
 399
 400 static void via_pm_class_init(ObjectClass *klass, void *data)
 401 {
 402     DeviceClass *dc = DEVICE_CLASS(klass);
 403     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 404
 405     k->realize = vt82c686b_pm_realize;
 406     k->config_write = pm_write_config;
 407     k->vendor_id = PCI_VENDOR_ID_VIA;
 408     k->device_id = PCI_DEVICE_ID_VIA_ACPI;
 409     k->class_id = PCI_CLASS_BRIDGE_OTHER;
 410     k->revision = 0x40;
 411     dc->desc = "PM";
 412     dc->vmsd = &vmstate_acpi;
 413     set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
 414     dc->props = via_pm_properties;
 415 }
 416
 417 static const TypeInfo via_pm_info = {
 418     .name          = TYPE_VT82C686B_PM_DEVICE,
 419     .parent        = TYPE_PCI_DEVICE,
 420     .instance_size = sizeof(VT686PMState),
 421     .class_init    = via_pm_class_init,
 422 };
 423
 424 static const VMStateDescription vmstate_via = {
 425     .name = "vt82c686b",
 426     .version_id = 1,
 427     .minimum_version_id = 1,
 428     .fields = (VMStateField[]) {
 429         VMSTATE_PCI_DEVICE(dev, VT82C686BState),
 430         VMSTATE_END_OF_LIST()
 431     }
 432 };
 433
 434 /* init the PCI-to-ISA bridge */
 435 static void vt82c686b_realize(PCIDevice *d, Error **errp)
 436 {
 437     VT82C686BState *vt82c = VT82C686B_DEVICE(d);
 438     uint8_t *pci_conf;
 439     ISABus *isa_bus;
 440     uint8_t *wmask;
 441     int i;
 442
 443     isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
 444                           pci_address_space_io(d), errp);
 445     if (!isa_bus) {
 446         return;
 447     }
 448
 449     pci_conf = d->config;
 450     pci_config_set_prog_interface(pci_conf, 0x0);
 451
 452     wmask = d->wmask;
 453     for (i = 0x00; i < 0xff; i++) {
 454        if (i<=0x03 || (i>=0x08 && i<=0x3f)) {
 455            wmask[i] = 0x00;
 456        }
 457     }
 458
 459     memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
 460                           &vt82c->superio_conf, "superio", 2);
 461     memory_region_set_enabled(&vt82c->superio, false);
 462     /* The floppy also uses 0x3f0 and 0x3f1.
 463      * But we do not emulate a floppy, so just set it here. */
 464     memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
 465                                 &vt82c->superio);
 466
 467     qemu_register_reset(vt82c686b_reset, d);
 468 }
 469
 470 ISABus *vt82c686b_init(PCIBus *bus, int devfn)
 471 {
 472     PCIDevice *d;
 473
 474     d = pci_create_simple_multifunction(bus, devfn, true,
 475                                         TYPE_VT82C686B_DEVICE);
 476
 477     return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
 478 }
 479
 480 static void via_class_init(ObjectClass *klass, void *data)
 481 {
 482     DeviceClass *dc = DEVICE_CLASS(klass);
 483     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 484
 485     k->realize = vt82c686b_realize;
 486     k->config_write = vt82c686b_write_config;
 487     k->vendor_id = PCI_VENDOR_ID_VIA;
 488     k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
 489     k->class_id = PCI_CLASS_BRIDGE_ISA;
 490     k->revision = 0x40;
 491     dc->desc = "ISA bridge";
 492     dc->vmsd = &vmstate_via;
 493     /*
 494      * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
 495      * e.g. by mips_fulong2e_init()
 496      */
 497     dc->cannot_instantiate_with_device_add_yet = true;
 498 }
 499
 500 static const TypeInfo via_info = {
 501     .name          = TYPE_VT82C686B_DEVICE,
 502     .parent        = TYPE_PCI_DEVICE,
 503     .instance_size = sizeof(VT82C686BState),
 504     .class_init    = via_class_init,
 505 };
 506
 507 static void vt82c686b_register_types(void)
 508 {
 509     type_register_static(&via_ac97_info);
 510     type_register_static(&via_mc97_info);
 511     type_register_static(&via_pm_info);
 512     type_register_static(&via_info);
 513 }
 514
 515 type_init(vt82c686b_register_types)