hw/nand.c

   1 /*
   2  * Flash NAND memory emulation.  Based on "16M x 8 Bit NAND Flash
   3  * Memory" datasheet for the KM29U128AT / K9F2808U0A chips from
   4  * Samsung Electronic.
   5  *
   6  * Copyright (c) 2006 Openedhand Ltd.
   7  * Written by Andrzej Zaborowski <balrog@zabor.org>
   8  *
   9  * Support for additional features based on "MT29F2G16ABCWP 2Gx16"
  10  * datasheet from Micron Technology and "NAND02G-B2C" datasheet
  11  * from ST Microelectronics.
  12  *
  13  * This code is licensed under the GNU GPL v2.
  14  *
  15  * Contributions after 2012-01-13 are licensed under the terms of the
  16  * GNU GPL, version 2 or (at your option) any later version.
  17  */
  18
  19 #ifndef NAND_IO
  20
  21 # include "hw.h"
  22 # include "flash.h"
  23 # include "sysemu/blockdev.h"
  24 # include "sysbus.h"
  25 #include "qemu/error-report.h"
  26
  27 # define NAND_CMD_READ0         0x00
  28 # define NAND_CMD_READ1         0x01
  29 # define NAND_CMD_READ2         0x50
  30 # define NAND_CMD_LPREAD2       0x30
  31 # define NAND_CMD_NOSERIALREAD2 0x35
  32 # define NAND_CMD_RANDOMREAD1   0x05
  33 # define NAND_CMD_RANDOMREAD2   0xe0
  34 # define NAND_CMD_READID        0x90
  35 # define NAND_CMD_RESET         0xff
  36 # define NAND_CMD_PAGEPROGRAM1  0x80
  37 # define NAND_CMD_PAGEPROGRAM2  0x10
  38 # define NAND_CMD_CACHEPROGRAM2 0x15
  39 # define NAND_CMD_BLOCKERASE1   0x60
  40 # define NAND_CMD_BLOCKERASE2   0xd0
  41 # define NAND_CMD_READSTATUS    0x70
  42 # define NAND_CMD_COPYBACKPRG1  0x85
  43
  44 # define NAND_IOSTATUS_ERROR    (1 << 0)
  45 # define NAND_IOSTATUS_PLANE0   (1 << 1)
  46 # define NAND_IOSTATUS_PLANE1   (1 << 2)
  47 # define NAND_IOSTATUS_PLANE2   (1 << 3)
  48 # define NAND_IOSTATUS_PLANE3   (1 << 4)
  49 # define NAND_IOSTATUS_BUSY     (1 << 6)
  50 # define NAND_IOSTATUS_UNPROTCT (1 << 7)
  51
  52 # define MAX_PAGE               0x800
  53 # define MAX_OOB                0x40
  54
  55 typedef struct NANDFlashState NANDFlashState;
  56 struct NANDFlashState {
  57     SysBusDevice busdev;
  58     uint8_t manf_id, chip_id;
  59     uint8_t buswidth; /* in BYTES */
  60     int size, pages;
  61     int page_shift, oob_shift, erase_shift, addr_shift;
  62     uint8_t *storage;
  63     BlockDriverState *bdrv;
  64     int mem_oob;
  65
  66     uint8_t cle, ale, ce, wp, gnd;
  67
  68     uint8_t io[MAX_PAGE + MAX_OOB + 0x400];
  69     uint8_t *ioaddr;
  70     int iolen;
  71
  72     uint32_t cmd;
  73     uint64_t addr;
  74     int addrlen;
  75     int status;
  76     int offset;
  77
  78     void (*blk_write)(NANDFlashState *s);
  79     void (*blk_erase)(NANDFlashState *s);
  80     void (*blk_load)(NANDFlashState *s, uint64_t addr, int offset);
  81
  82     uint32_t ioaddr_vmstate;
  83 };
  84
  85 static void mem_and(uint8_t *dest, const uint8_t *src, size_t n)
  86 {
  87     /* Like memcpy() but we logical-AND the data into the destination */
  88     int i;
  89     for (i = 0; i < n; i++) {
  90         dest[i] &= src[i];
  91     }
  92 }
  93
  94 # define NAND_NO_AUTOINCR       0x00000001
  95 # define NAND_BUSWIDTH_16       0x00000002
  96 # define NAND_NO_PADDING        0x00000004
  97 # define NAND_CACHEPRG          0x00000008
  98 # define NAND_COPYBACK          0x00000010
  99 # define NAND_IS_AND            0x00000020
 100 # define NAND_4PAGE_ARRAY       0x00000040
 101 # define NAND_NO_READRDY        0x00000100
 102 # define NAND_SAMSUNG_LP        (NAND_NO_PADDING | NAND_COPYBACK)
 103
 104 # define NAND_IO
 105
 106 # define PAGE(addr)             ((addr) >> ADDR_SHIFT)
 107 # define PAGE_START(page)       (PAGE(page) * (PAGE_SIZE + OOB_SIZE))
 108 # define PAGE_MASK              ((1 << ADDR_SHIFT) - 1)
 109 # define OOB_SHIFT              (PAGE_SHIFT - 5)
 110 # define OOB_SIZE               (1 << OOB_SHIFT)
 111 # define SECTOR(addr)           ((addr) >> (9 + ADDR_SHIFT - PAGE_SHIFT))
 112 # define SECTOR_OFFSET(addr)    ((addr) & ((511 >> PAGE_SHIFT) << 8))
 113
 114 # define PAGE_SIZE              256
 115 # define PAGE_SHIFT             8
 116 # define PAGE_SECTORS           1
 117 # define ADDR_SHIFT             8
 118 # include "nand.c"
 119 # define PAGE_SIZE              512
 120 # define PAGE_SHIFT             9
 121 # define PAGE_SECTORS           1
 122 # define ADDR_SHIFT             8
 123 # include "nand.c"
 124 # define PAGE_SIZE              2048
 125 # define PAGE_SHIFT             11
 126 # define PAGE_SECTORS           4
 127 # define ADDR_SHIFT             16
 128 # include "nand.c"
 129
 130 /* Information based on Linux drivers/mtd/nand/nand_ids.c */
 131 static const struct {
 132     int size;
 133     int width;
 134     int page_shift;
 135     int erase_shift;
 136     uint32_t options;
 137 } nand_flash_ids[0x100] = {
 138     [0 ... 0xff] = { 0 },
 139
 140     [0x6e] = { 1,       8,      8, 4, 0 },
 141     [0x64] = { 2,       8,      8, 4, 0 },
 142     [0x6b] = { 4,       8,      9, 4, 0 },
 143     [0xe8] = { 1,       8,      8, 4, 0 },
 144     [0xec] = { 1,       8,      8, 4, 0 },
 145     [0xea] = { 2,       8,      8, 4, 0 },
 146     [0xd5] = { 4,       8,      9, 4, 0 },
 147     [0xe3] = { 4,       8,      9, 4, 0 },
 148     [0xe5] = { 4,       8,      9, 4, 0 },
 149     [0xd6] = { 8,       8,      9, 4, 0 },
 150
 151     [0x39] = { 8,       8,      9, 4, 0 },
 152     [0xe6] = { 8,       8,      9, 4, 0 },
 153     [0x49] = { 8,       16,     9, 4, NAND_BUSWIDTH_16 },
 154     [0x59] = { 8,       16,     9, 4, NAND_BUSWIDTH_16 },
 155
 156     [0x33] = { 16,      8,      9, 5, 0 },
 157     [0x73] = { 16,      8,      9, 5, 0 },
 158     [0x43] = { 16,      16,     9, 5, NAND_BUSWIDTH_16 },
 159     [0x53] = { 16,      16,     9, 5, NAND_BUSWIDTH_16 },
 160
 161     [0x35] = { 32,      8,      9, 5, 0 },
 162     [0x75] = { 32,      8,      9, 5, 0 },
 163     [0x45] = { 32,      16,     9, 5, NAND_BUSWIDTH_16 },
 164     [0x55] = { 32,      16,     9, 5, NAND_BUSWIDTH_16 },
 165
 166     [0x36] = { 64,      8,      9, 5, 0 },
 167     [0x76] = { 64,      8,      9, 5, 0 },
 168     [0x46] = { 64,      16,     9, 5, NAND_BUSWIDTH_16 },
 169     [0x56] = { 64,      16,     9, 5, NAND_BUSWIDTH_16 },
 170
 171     [0x78] = { 128,     8,      9, 5, 0 },
 172     [0x39] = { 128,     8,      9, 5, 0 },
 173     [0x79] = { 128,     8,      9, 5, 0 },
 174     [0x72] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 175     [0x49] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 176     [0x74] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 177     [0x59] = { 128,     16,     9, 5, NAND_BUSWIDTH_16 },
 178
 179     [0x71] = { 256,     8,      9, 5, 0 },
 180
 181     /*
 182      * These are the new chips with large page size. The pagesize and the
 183      * erasesize is determined from the extended id bytes
 184      */
 185 # define LP_OPTIONS     (NAND_SAMSUNG_LP | NAND_NO_READRDY | NAND_NO_AUTOINCR)
 186 # define LP_OPTIONS16   (LP_OPTIONS | NAND_BUSWIDTH_16)
 187
 188     /* 512 Megabit */
 189     [0xa2] = { 64,      8,      0, 0, LP_OPTIONS },
 190     [0xf2] = { 64,      8,      0, 0, LP_OPTIONS },
 191     [0xb2] = { 64,      16,     0, 0, LP_OPTIONS16 },
 192     [0xc2] = { 64,      16,     0, 0, LP_OPTIONS16 },
 193
 194     /* 1 Gigabit */
 195     [0xa1] = { 128,     8,      0, 0, LP_OPTIONS },
 196     [0xf1] = { 128,     8,      0, 0, LP_OPTIONS },
 197     [0xb1] = { 128,     16,     0, 0, LP_OPTIONS16 },
 198     [0xc1] = { 128,     16,     0, 0, LP_OPTIONS16 },
 199
 200     /* 2 Gigabit */
 201     [0xaa] = { 256,     8,      0, 0, LP_OPTIONS },
 202     [0xda] = { 256,     8,      0, 0, LP_OPTIONS },
 203     [0xba] = { 256,     16,     0, 0, LP_OPTIONS16 },
 204     [0xca] = { 256,     16,     0, 0, LP_OPTIONS16 },
 205
 206     /* 4 Gigabit */
 207     [0xac] = { 512,     8,      0, 0, LP_OPTIONS },
 208     [0xdc] = { 512,     8,      0, 0, LP_OPTIONS },
 209     [0xbc] = { 512,     16,     0, 0, LP_OPTIONS16 },
 210     [0xcc] = { 512,     16,     0, 0, LP_OPTIONS16 },
 211
 212     /* 8 Gigabit */
 213     [0xa3] = { 1024,    8,      0, 0, LP_OPTIONS },
 214     [0xd3] = { 1024,    8,      0, 0, LP_OPTIONS },
 215     [0xb3] = { 1024,    16,     0, 0, LP_OPTIONS16 },
 216     [0xc3] = { 1024,    16,     0, 0, LP_OPTIONS16 },
 217
 218     /* 16 Gigabit */
 219     [0xa5] = { 2048,    8,      0, 0, LP_OPTIONS },
 220     [0xd5] = { 2048,    8,      0, 0, LP_OPTIONS },
 221     [0xb5] = { 2048,    16,     0, 0, LP_OPTIONS16 },
 222     [0xc5] = { 2048,    16,     0, 0, LP_OPTIONS16 },
 223 };
 224
 225 static void nand_reset(DeviceState *dev)
 226 {
 227     NANDFlashState *s = FROM_SYSBUS(NANDFlashState, SYS_BUS_DEVICE(dev));
 228     s->cmd = NAND_CMD_READ0;
 229     s->addr = 0;
 230     s->addrlen = 0;
 231     s->iolen = 0;
 232     s->offset = 0;
 233     s->status &= NAND_IOSTATUS_UNPROTCT;
 234 }
 235
 236 static inline void nand_pushio_byte(NANDFlashState *s, uint8_t value)
 237 {
 238     s->ioaddr[s->iolen++] = value;
 239     for (value = s->buswidth; --value;) {
 240         s->ioaddr[s->iolen++] = 0;
 241     }
 242 }
 243
 244 static void nand_command(NANDFlashState *s)
 245 {
 246     unsigned int offset;
 247     switch (s->cmd) {
 248     case NAND_CMD_READ0:
 249         s->iolen = 0;
 250         break;
 251
 252     case NAND_CMD_READID:
 253         s->ioaddr = s->io;
 254         s->iolen = 0;
 255         nand_pushio_byte(s, s->manf_id);
 256         nand_pushio_byte(s, s->chip_id);
 257         nand_pushio_byte(s, 'Q'); /* Don't-care byte (often 0xa5) */
 258         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
 259             /* Page Size, Block Size, Spare Size; bit 6 indicates
 260              * 8 vs 16 bit width NAND.
 261              */
 262             nand_pushio_byte(s, (s->buswidth == 2) ? 0x55 : 0x15);
 263         } else {
 264             nand_pushio_byte(s, 0xc0); /* Multi-plane */
 265         }
 266         break;
 267
 268     case NAND_CMD_RANDOMREAD2:
 269     case NAND_CMD_NOSERIALREAD2:
 270         if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP))
 271             break;
 272         offset = s->addr & ((1 << s->addr_shift) - 1);
 273         s->blk_load(s, s->addr, offset);
 274         if (s->gnd)
 275             s->iolen = (1 << s->page_shift) - offset;
 276         else
 277             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
 278         break;
 279
 280     case NAND_CMD_RESET:
 281         nand_reset(&s->busdev.qdev);
 282         break;
 283
 284     case NAND_CMD_PAGEPROGRAM1:
 285         s->ioaddr = s->io;
 286         s->iolen = 0;
 287         break;
 288
 289     case NAND_CMD_PAGEPROGRAM2:
 290         if (s->wp) {
 291             s->blk_write(s);
 292         }
 293         break;
 294
 295     case NAND_CMD_BLOCKERASE1:
 296         break;
 297
 298     case NAND_CMD_BLOCKERASE2:
 299         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP)
 300             s->addr <<= 16;
 301         else
 302             s->addr <<= 8;
 303
 304         if (s->wp) {
 305             s->blk_erase(s);
 306         }
 307         break;
 308
 309     case NAND_CMD_READSTATUS:
 310         s->ioaddr = s->io;
 311         s->iolen = 0;
 312         nand_pushio_byte(s, s->status);
 313         break;
 314
 315     default:
 316         printf("%s: Unknown NAND command 0x%02x\n", __FUNCTION__, s->cmd);
 317     }
 318 }
 319
 320 static void nand_pre_save(void *opaque)
 321 {
 322     NANDFlashState *s = opaque;
 323
 324     s->ioaddr_vmstate = s->ioaddr - s->io;
 325 }
 326
 327 static int nand_post_load(void *opaque, int version_id)
 328 {
 329     NANDFlashState *s = opaque;
 330
 331     if (s->ioaddr_vmstate > sizeof(s->io)) {
 332         return -EINVAL;
 333     }
 334     s->ioaddr = s->io + s->ioaddr_vmstate;
 335
 336     return 0;
 337 }
 338
 339 static const VMStateDescription vmstate_nand = {
 340     .name = "nand",
 341     .version_id = 1,
 342     .minimum_version_id = 1,
 343     .minimum_version_id_old = 1,
 344     .pre_save = nand_pre_save,
 345     .post_load = nand_post_load,
 346     .fields      = (VMStateField[]) {
 347         VMSTATE_UINT8(cle, NANDFlashState),
 348         VMSTATE_UINT8(ale, NANDFlashState),
 349         VMSTATE_UINT8(ce, NANDFlashState),
 350         VMSTATE_UINT8(wp, NANDFlashState),
 351         VMSTATE_UINT8(gnd, NANDFlashState),
 352         VMSTATE_BUFFER(io, NANDFlashState),
 353         VMSTATE_UINT32(ioaddr_vmstate, NANDFlashState),
 354         VMSTATE_INT32(iolen, NANDFlashState),
 355         VMSTATE_UINT32(cmd, NANDFlashState),
 356         VMSTATE_UINT64(addr, NANDFlashState),
 357         VMSTATE_INT32(addrlen, NANDFlashState),
 358         VMSTATE_INT32(status, NANDFlashState),
 359         VMSTATE_INT32(offset, NANDFlashState),
 360         /* XXX: do we want to save s->storage too? */
 361         VMSTATE_END_OF_LIST()
 362     }
 363 };
 364
 365 static int nand_device_init(SysBusDevice *dev)
 366 {
 367     int pagesize;
 368     NANDFlashState *s = FROM_SYSBUS(NANDFlashState, dev);
 369
 370     s->buswidth = nand_flash_ids[s->chip_id].width >> 3;
 371     s->size = nand_flash_ids[s->chip_id].size << 20;
 372     if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
 373         s->page_shift = 11;
 374         s->erase_shift = 6;
 375     } else {
 376         s->page_shift = nand_flash_ids[s->chip_id].page_shift;
 377         s->erase_shift = nand_flash_ids[s->chip_id].erase_shift;
 378     }
 379
 380     switch (1 << s->page_shift) {
 381     case 256:
 382         nand_init_256(s);
 383         break;
 384     case 512:
 385         nand_init_512(s);
 386         break;
 387     case 2048:
 388         nand_init_2048(s);
 389         break;
 390     default:
 391         error_report("Unsupported NAND block size");
 392         return -1;
 393     }
 394
 395     pagesize = 1 << s->oob_shift;
 396     s->mem_oob = 1;
 397     if (s->bdrv) {
 398         if (bdrv_is_read_only(s->bdrv)) {
 399             error_report("Can't use a read-only drive");
 400             return -1;
 401         }
 402         if (bdrv_getlength(s->bdrv) >=
 403                 (s->pages << s->page_shift) + (s->pages << s->oob_shift)) {
 404             pagesize = 0;
 405             s->mem_oob = 0;
 406         }
 407     } else {
 408         pagesize += 1 << s->page_shift;
 409     }
 410     if (pagesize) {
 411         s->storage = (uint8_t *) memset(g_malloc(s->pages * pagesize),
 412                         0xff, s->pages * pagesize);
 413     }
 414     /* Give s->ioaddr a sane value in case we save state before it is used. */
 415     s->ioaddr = s->io;
 416
 417     return 0;
 418 }
 419
 420 static Property nand_properties[] = {
 421     DEFINE_PROP_UINT8("manufacturer_id", NANDFlashState, manf_id, 0),
 422     DEFINE_PROP_UINT8("chip_id", NANDFlashState, chip_id, 0),
 423     DEFINE_PROP_DRIVE("drive", NANDFlashState, bdrv),
 424     DEFINE_PROP_END_OF_LIST(),
 425 };
 426
 427 static void nand_class_init(ObjectClass *klass, void *data)
 428 {
 429     DeviceClass *dc = DEVICE_CLASS(klass);
 430     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 431
 432     k->init = nand_device_init;
 433     dc->reset = nand_reset;
 434     dc->vmsd = &vmstate_nand;
 435     dc->props = nand_properties;
 436 }
 437
 438 static const TypeInfo nand_info = {
 439     .name          = "nand",
 440     .parent        = TYPE_SYS_BUS_DEVICE,
 441     .instance_size = sizeof(NANDFlashState),
 442     .class_init    = nand_class_init,
 443 };
 444
 445 static void nand_register_types(void)
 446 {
 447     type_register_static(&nand_info);
 448 }
 449
 450 /*
 451  * Chip inputs are CLE, ALE, CE, WP, GND and eight I/O pins.  Chip
 452  * outputs are R/B and eight I/O pins.
 453  *
 454  * CE, WP and R/B are active low.
 455  */
 456 void nand_setpins(DeviceState *dev, uint8_t cle, uint8_t ale,
 457                   uint8_t ce, uint8_t wp, uint8_t gnd)
 458 {
 459     NANDFlashState *s = (NANDFlashState *) dev;
 460     s->cle = cle;
 461     s->ale = ale;
 462     s->ce = ce;
 463     s->wp = wp;
 464     s->gnd = gnd;
 465     if (wp)
 466         s->status |= NAND_IOSTATUS_UNPROTCT;
 467     else
 468         s->status &= ~NAND_IOSTATUS_UNPROTCT;
 469 }
 470
 471 void nand_getpins(DeviceState *dev, int *rb)
 472 {
 473     *rb = 1;
 474 }
 475
 476 void nand_setio(DeviceState *dev, uint32_t value)
 477 {
 478     int i;
 479     NANDFlashState *s = (NANDFlashState *) dev;
 480     if (!s->ce && s->cle) {
 481         if (nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) {
 482             if (s->cmd == NAND_CMD_READ0 && value == NAND_CMD_LPREAD2)
 483                 return;
 484             if (value == NAND_CMD_RANDOMREAD1) {
 485                 s->addr &= ~((1 << s->addr_shift) - 1);
 486                 s->addrlen = 0;
 487                 return;
 488             }
 489         }
 490         if (value == NAND_CMD_READ0)
 491             s->offset = 0;
 492         else if (value == NAND_CMD_READ1) {
 493             s->offset = 0x100;
 494             value = NAND_CMD_READ0;
 495         }
 496         else if (value == NAND_CMD_READ2) {
 497             s->offset = 1 << s->page_shift;
 498             value = NAND_CMD_READ0;
 499         }
 500
 501         s->cmd = value;
 502
 503         if (s->cmd == NAND_CMD_READSTATUS ||
 504                 s->cmd == NAND_CMD_PAGEPROGRAM2 ||
 505                 s->cmd == NAND_CMD_BLOCKERASE1 ||
 506                 s->cmd == NAND_CMD_BLOCKERASE2 ||
 507                 s->cmd == NAND_CMD_NOSERIALREAD2 ||
 508                 s->cmd == NAND_CMD_RANDOMREAD2 ||
 509                 s->cmd == NAND_CMD_RESET)
 510             nand_command(s);
 511
 512         if (s->cmd != NAND_CMD_RANDOMREAD2) {
 513             s->addrlen = 0;
 514         }
 515     }
 516
 517     if (s->ale) {
 518         unsigned int shift = s->addrlen * 8;
 519         unsigned int mask = ~(0xff << shift);
 520         unsigned int v = value << shift;
 521
 522         s->addr = (s->addr & mask) | v;
 523         s->addrlen ++;
 524
 525         switch (s->addrlen) {
 526         case 1:
 527             if (s->cmd == NAND_CMD_READID) {
 528                 nand_command(s);
 529             }
 530             break;
 531         case 2: /* fix cache address as a byte address */
 532             s->addr <<= (s->buswidth - 1);
 533             break;
 534         case 3:
 535             if (!(nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
 536                     (s->cmd == NAND_CMD_READ0 ||
 537                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
 538                 nand_command(s);
 539             }
 540             break;
 541         case 4:
 542             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
 543                     nand_flash_ids[s->chip_id].size < 256 && /* 1Gb or less */
 544                     (s->cmd == NAND_CMD_READ0 ||
 545                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
 546                 nand_command(s);
 547             }
 548             break;
 549         case 5:
 550             if ((nand_flash_ids[s->chip_id].options & NAND_SAMSUNG_LP) &&
 551                     nand_flash_ids[s->chip_id].size >= 256 && /* 2Gb or more */
 552                     (s->cmd == NAND_CMD_READ0 ||
 553                      s->cmd == NAND_CMD_PAGEPROGRAM1)) {
 554                 nand_command(s);
 555             }
 556             break;
 557         default:
 558             break;
 559         }
 560     }
 561
 562     if (!s->cle && !s->ale && s->cmd == NAND_CMD_PAGEPROGRAM1) {
 563         if (s->iolen < (1 << s->page_shift) + (1 << s->oob_shift)) {
 564             for (i = s->buswidth; i--; value >>= 8) {
 565                 s->io[s->iolen ++] = (uint8_t) (value & 0xff);
 566             }
 567         }
 568     } else if (!s->cle && !s->ale && s->cmd == NAND_CMD_COPYBACKPRG1) {
 569         if ((s->addr & ((1 << s->addr_shift) - 1)) <
 570                 (1 << s->page_shift) + (1 << s->oob_shift)) {
 571             for (i = s->buswidth; i--; s->addr++, value >>= 8) {
 572                 s->io[s->iolen + (s->addr & ((1 << s->addr_shift) - 1))] =
 573                     (uint8_t) (value & 0xff);
 574             }
 575         }
 576     }
 577 }
 578
 579 uint32_t nand_getio(DeviceState *dev)
 580 {
 581     int offset;
 582     uint32_t x = 0;
 583     NANDFlashState *s = (NANDFlashState *) dev;
 584
 585     /* Allow sequential reading */
 586     if (!s->iolen && s->cmd == NAND_CMD_READ0) {
 587         offset = (int) (s->addr & ((1 << s->addr_shift) - 1)) + s->offset;
 588         s->offset = 0;
 589
 590         s->blk_load(s, s->addr, offset);
 591         if (s->gnd)
 592             s->iolen = (1 << s->page_shift) - offset;
 593         else
 594             s->iolen = (1 << s->page_shift) + (1 << s->oob_shift) - offset;
 595     }
 596
 597     if (s->ce || s->iolen <= 0)
 598         return 0;
 599
 600     for (offset = s->buswidth; offset--;) {
 601         x |= s->ioaddr[offset] << (offset << 3);
 602     }
 603     /* after receiving READ STATUS command all subsequent reads will
 604      * return the status register value until another command is issued
 605      */
 606     if (s->cmd != NAND_CMD_READSTATUS) {
 607         s->addr   += s->buswidth;
 608         s->ioaddr += s->buswidth;
 609         s->iolen  -= s->buswidth;
 610     }
 611     return x;
 612 }
 613
 614 uint32_t nand_getbuswidth(DeviceState *dev)
 615 {
 616     NANDFlashState *s = (NANDFlashState *) dev;
 617     return s->buswidth << 3;
 618 }
 619
 620 DeviceState *nand_init(BlockDriverState *bdrv, int manf_id, int chip_id)
 621 {
 622     DeviceState *dev;
 623
 624     if (nand_flash_ids[chip_id].size == 0) {
 625         hw_error("%s: Unsupported NAND chip ID.\n", __FUNCTION__);
 626     }
 627     dev = qdev_create(NULL, "nand");
 628     qdev_prop_set_uint8(dev, "manufacturer_id", manf_id);
 629     qdev_prop_set_uint8(dev, "chip_id", chip_id);
 630     if (bdrv) {
 631         qdev_prop_set_drive_nofail(dev, "drive", bdrv);
 632     }
 633
 634     qdev_init_nofail(dev);
 635     return dev;
 636 }
 637
 638 type_init(nand_register_types)
 639
 640 #else
 641
 642 /* Program a single page */
 643 static void glue(nand_blk_write_, PAGE_SIZE)(NANDFlashState *s)
 644 {
 645     uint64_t off, page, sector, soff;
 646     uint8_t iobuf[(PAGE_SECTORS + 2) * 0x200];
 647     if (PAGE(s->addr) >= s->pages)
 648         return;
 649
 650     if (!s->bdrv) {
 651         mem_and(s->storage + PAGE_START(s->addr) + (s->addr & PAGE_MASK) +
 652                         s->offset, s->io, s->iolen);
 653     } else if (s->mem_oob) {
 654         sector = SECTOR(s->addr);
 655         off = (s->addr & PAGE_MASK) + s->offset;
 656         soff = SECTOR_OFFSET(s->addr);
 657         if (bdrv_read(s->bdrv, sector, iobuf, PAGE_SECTORS) < 0) {
 658             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
 659             return;
 660         }
 661
 662         mem_and(iobuf + (soff | off), s->io, MIN(s->iolen, PAGE_SIZE - off));
 663         if (off + s->iolen > PAGE_SIZE) {
 664             page = PAGE(s->addr);
 665             mem_and(s->storage + (page << OOB_SHIFT), s->io + PAGE_SIZE - off,
 666                             MIN(OOB_SIZE, off + s->iolen - PAGE_SIZE));
 667         }
 668
 669         if (bdrv_write(s->bdrv, sector, iobuf, PAGE_SECTORS) < 0) {
 670             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
 671         }
 672     } else {
 673         off = PAGE_START(s->addr) + (s->addr & PAGE_MASK) + s->offset;
 674         sector = off >> 9;
 675         soff = off & 0x1ff;
 676         if (bdrv_read(s->bdrv, sector, iobuf, PAGE_SECTORS + 2) < 0) {
 677             printf("%s: read error in sector %" PRIu64 "\n", __func__, sector);
 678             return;
 679         }
 680
 681         mem_and(iobuf + soff, s->io, s->iolen);
 682
 683         if (bdrv_write(s->bdrv, sector, iobuf, PAGE_SECTORS + 2) < 0) {
 684             printf("%s: write error in sector %" PRIu64 "\n", __func__, sector);
 685         }
 686     }
 687     s->offset = 0;
 688 }
 689
 690 /* Erase a single block */
 691 static void glue(nand_blk_erase_, PAGE_SIZE)(NANDFlashState *s)
 692 {
 693     uint64_t i, page, addr;
 694     uint8_t iobuf[0x200] = { [0 ... 0x1ff] = 0xff, };
 695     addr = s->addr & ~((1 << (ADDR_SHIFT + s->erase_shift)) - 1);
 696
 697     if (PAGE(addr) >= s->pages)
 698         return;
 699
 700     if (!s->bdrv) {
 701         memset(s->storage + PAGE_START(addr),
 702                         0xff, (PAGE_SIZE + OOB_SIZE) << s->erase_shift);
 703     } else if (s->mem_oob) {
 704         memset(s->storage + (PAGE(addr) << OOB_SHIFT),
 705                         0xff, OOB_SIZE << s->erase_shift);
 706         i = SECTOR(addr);
 707         page = SECTOR(addr + (ADDR_SHIFT + s->erase_shift));
 708         for (; i < page; i ++)
 709             if (bdrv_write(s->bdrv, i, iobuf, 1) < 0) {
 710                 printf("%s: write error in sector %" PRIu64 "\n", __func__, i);
 711             }
 712     } else {
 713         addr = PAGE_START(addr);
 714         page = addr >> 9;
 715         if (bdrv_read(s->bdrv, page, iobuf, 1) < 0) {
 716             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
 717         }
 718         memset(iobuf + (addr & 0x1ff), 0xff, (~addr & 0x1ff) + 1);
 719         if (bdrv_write(s->bdrv, page, iobuf, 1) < 0) {
 720             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
 721         }
 722
 723         memset(iobuf, 0xff, 0x200);
 724         i = (addr & ~0x1ff) + 0x200;
 725         for (addr += ((PAGE_SIZE + OOB_SIZE) << s->erase_shift) - 0x200;
 726                         i < addr; i += 0x200)
 727             if (bdrv_write(s->bdrv, i >> 9, iobuf, 1) < 0) {
 728                 printf("%s: write error in sector %" PRIu64 "\n",
 729                        __func__, i >> 9);
 730             }
 731
 732         page = i >> 9;
 733         if (bdrv_read(s->bdrv, page, iobuf, 1) < 0) {
 734             printf("%s: read error in sector %" PRIu64 "\n", __func__, page);
 735         }
 736         memset(iobuf, 0xff, ((addr - 1) & 0x1ff) + 1);
 737         if (bdrv_write(s->bdrv, page, iobuf, 1) < 0) {
 738             printf("%s: write error in sector %" PRIu64 "\n", __func__, page);
 739         }
 740     }
 741 }
 742
 743 static void glue(nand_blk_load_, PAGE_SIZE)(NANDFlashState *s,
 744                 uint64_t addr, int offset)
 745 {
 746     if (PAGE(addr) >= s->pages)
 747         return;
 748
 749     if (s->bdrv) {
 750         if (s->mem_oob) {
 751             if (bdrv_read(s->bdrv, SECTOR(addr), s->io, PAGE_SECTORS) < 0) {
 752                 printf("%s: read error in sector %" PRIu64 "\n",
 753                                 __func__, SECTOR(addr));
 754             }
 755             memcpy(s->io + SECTOR_OFFSET(s->addr) + PAGE_SIZE,
 756                             s->storage + (PAGE(s->addr) << OOB_SHIFT),
 757                             OOB_SIZE);
 758             s->ioaddr = s->io + SECTOR_OFFSET(s->addr) + offset;
 759         } else {
 760             if (bdrv_read(s->bdrv, PAGE_START(addr) >> 9,
 761                                     s->io, (PAGE_SECTORS + 2)) < 0) {
 762                 printf("%s: read error in sector %" PRIu64 "\n",
 763                                 __func__, PAGE_START(addr) >> 9);
 764             }
 765             s->ioaddr = s->io + (PAGE_START(addr) & 0x1ff) + offset;
 766         }
 767     } else {
 768         memcpy(s->io, s->storage + PAGE_START(s->addr) +
 769                         offset, PAGE_SIZE + OOB_SIZE - offset);
 770         s->ioaddr = s->io;
 771     }
 772 }
 773
 774 static void glue(nand_init_, PAGE_SIZE)(NANDFlashState *s)
 775 {
 776     s->oob_shift = PAGE_SHIFT - 5;
 777     s->pages = s->size >> PAGE_SHIFT;
 778     s->addr_shift = ADDR_SHIFT;
 779
 780     s->blk_erase = glue(nand_blk_erase_, PAGE_SIZE);
 781     s->blk_write = glue(nand_blk_write_, PAGE_SIZE);
 782     s->blk_load = glue(nand_blk_load_, PAGE_SIZE);
 783 }
 784
 785 # undef PAGE_SIZE
 786 # undef PAGE_SHIFT
 787 # undef PAGE_SECTORS
 788 # undef ADDR_SHIFT
 789 #endif  /* NAND_IO */