4 * Copyright IBM, Corp. 2008
7 * Anthony Liguori <aliguori@us.ibm.com>
9 * This work is licensed under the terms of the GNU GPL, version 2. See
10 * the COPYING file in the top-level directory.
12 * Contributions after 2012-01-13 are licensed under the terms of the
13 * GNU GPL, version 2 or (at your option) any later version.
16 #include "qemu/osdep.h"
17 #include "qemu/cutils.h"
18 #include "qemu/error-report.h"
19 #include "qemu/main-loop.h"
20 #include "migration/migration.h"
21 #include "migration/qemu-file.h"
22 #include "sysemu/sysemu.h"
23 #include "block/block.h"
24 #include "qapi/qmp/qerror.h"
25 #include "qapi/util.h"
26 #include "qemu/sockets.h"
28 #include "migration/block.h"
29 #include "migration/postcopy-ram.h"
30 #include "qemu/thread.h"
31 #include "qmp-commands.h"
33 #include "qapi-event.h"
35 #include "exec/memory.h"
36 #include "exec/address-spaces.h"
37 #include "io/channel-buffer.h"
38 #include "io/channel-tls.h"
39 #include "migration/colo.h"
41 #define MAX_THROTTLE (32 << 20) /* Migration transfer speed throttling */
43 /* Amount of time to allocate to each "chunk" of bandwidth-throttled
45 #define BUFFER_DELAY 100
46 #define XFER_LIMIT_RATIO (1000 / BUFFER_DELAY)
48 /* Time in milliseconds we are allowed to stop the source,
49 * for sending the last part */
50 #define DEFAULT_MIGRATE_SET_DOWNTIME 300
52 /* Maximum migrate downtime set to 2000 seconds */
53 #define MAX_MIGRATE_DOWNTIME_SECONDS 2000
54 #define MAX_MIGRATE_DOWNTIME (MAX_MIGRATE_DOWNTIME_SECONDS * 1000)
56 /* Default compression thread count */
57 #define DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT 8
58 /* Default decompression thread count, usually decompression is at
59 * least 4 times as fast as compression.*/
60 #define DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT 2
61 /*0: means nocompress, 1: best speed, ... 9: best compress ratio */
62 #define DEFAULT_MIGRATE_COMPRESS_LEVEL 1
63 /* Define default autoconverge cpu throttle migration parameters */
64 #define DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL 20
65 #define DEFAULT_MIGRATE_CPU_THROTTLE_INCREMENT 10
67 /* Migration XBZRLE default cache size */
68 #define DEFAULT_MIGRATE_CACHE_SIZE (64 * 1024 * 1024)
70 /* The delay time (in ms) between two COLO checkpoints
71 * Note: Please change this default value to 10000 when we support hybrid mode.
73 #define DEFAULT_MIGRATE_X_CHECKPOINT_DELAY 200
75 static NotifierList migration_state_notifiers
=
76 NOTIFIER_LIST_INITIALIZER(migration_state_notifiers
);
78 static bool deferred_incoming
;
81 * Current state of incoming postcopy; note this is not part of
82 * MigrationIncomingState since it's state is used during cleanup
83 * at the end as MIS is being freed.
85 static PostcopyState incoming_postcopy_state
;
87 /* When we add fault tolerance, we could have several
88 migrations at once. For now we don't need to add
89 dynamic creation of migration */
92 MigrationState
*migrate_get_current(void)
95 static MigrationState current_migration
= {
96 .state
= MIGRATION_STATUS_NONE
,
97 .xbzrle_cache_size
= DEFAULT_MIGRATE_CACHE_SIZE
,
100 .compress_level
= DEFAULT_MIGRATE_COMPRESS_LEVEL
,
101 .compress_threads
= DEFAULT_MIGRATE_COMPRESS_THREAD_COUNT
,
102 .decompress_threads
= DEFAULT_MIGRATE_DECOMPRESS_THREAD_COUNT
,
103 .cpu_throttle_initial
= DEFAULT_MIGRATE_CPU_THROTTLE_INITIAL
,
104 .cpu_throttle_increment
= DEFAULT_MIGRATE_CPU_THROTTLE_INCREMENT
,
105 .max_bandwidth
= MAX_THROTTLE
,
106 .downtime_limit
= DEFAULT_MIGRATE_SET_DOWNTIME
,
107 .x_checkpoint_delay
= DEFAULT_MIGRATE_X_CHECKPOINT_DELAY
,
112 qemu_mutex_init(¤t_migration
.src_page_req_mutex
);
115 return ¤t_migration
;
118 MigrationIncomingState
*migration_incoming_get_current(void)
121 static MigrationIncomingState mis_current
;
124 mis_current
.state
= MIGRATION_STATUS_NONE
;
125 memset(&mis_current
, 0, sizeof(MigrationIncomingState
));
126 QLIST_INIT(&mis_current
.loadvm_handlers
);
127 qemu_mutex_init(&mis_current
.rp_mutex
);
128 qemu_event_init(&mis_current
.main_thread_load_event
, false);
134 void migration_incoming_state_destroy(void)
136 struct MigrationIncomingState
*mis
= migration_incoming_get_current();
138 qemu_event_destroy(&mis
->main_thread_load_event
);
139 loadvm_free_handlers(mis
);
146 uint8_t runstate
[100];
151 static GlobalState global_state
;
153 int global_state_store(void)
155 if (!runstate_store((char *)global_state
.runstate
,
156 sizeof(global_state
.runstate
))) {
157 error_report("runstate name too big: %s", global_state
.runstate
);
158 trace_migrate_state_too_big();
164 void global_state_store_running(void)
166 const char *state
= RunState_lookup
[RUN_STATE_RUNNING
];
167 strncpy((char *)global_state
.runstate
,
168 state
, sizeof(global_state
.runstate
));
171 static bool global_state_received(void)
173 return global_state
.received
;
176 static RunState
global_state_get_runstate(void)
178 return global_state
.state
;
181 void global_state_set_optional(void)
183 global_state
.optional
= true;
186 static bool global_state_needed(void *opaque
)
188 GlobalState
*s
= opaque
;
189 char *runstate
= (char *)s
->runstate
;
191 /* If it is not optional, it is mandatory */
193 if (s
->optional
== false) {
197 /* If state is running or paused, it is not needed */
199 if (strcmp(runstate
, "running") == 0 ||
200 strcmp(runstate
, "paused") == 0) {
204 /* for any other state it is needed */
208 static int global_state_post_load(void *opaque
, int version_id
)
210 GlobalState
*s
= opaque
;
211 Error
*local_err
= NULL
;
213 char *runstate
= (char *)s
->runstate
;
216 trace_migrate_global_state_post_load(runstate
);
218 r
= qapi_enum_parse(RunState_lookup
, runstate
, RUN_STATE__MAX
,
223 error_report_err(local_err
);
232 static void global_state_pre_save(void *opaque
)
234 GlobalState
*s
= opaque
;
236 trace_migrate_global_state_pre_save((char *)s
->runstate
);
237 s
->size
= strlen((char *)s
->runstate
) + 1;
240 static const VMStateDescription vmstate_globalstate
= {
241 .name
= "globalstate",
243 .minimum_version_id
= 1,
244 .post_load
= global_state_post_load
,
245 .pre_save
= global_state_pre_save
,
246 .needed
= global_state_needed
,
247 .fields
= (VMStateField
[]) {
248 VMSTATE_UINT32(size
, GlobalState
),
249 VMSTATE_BUFFER(runstate
, GlobalState
),
250 VMSTATE_END_OF_LIST()
254 void register_global_state(void)
256 /* We would use it independently that we receive it */
257 strcpy((char *)&global_state
.runstate
, "");
258 global_state
.received
= false;
259 vmstate_register(NULL
, 0, &vmstate_globalstate
, &global_state
);
262 static void migrate_generate_event(int new_state
)
264 if (migrate_use_events()) {
265 qapi_event_send_migration(new_state
, &error_abort
);
270 * Called on -incoming with a defer: uri.
271 * The migration can be started later after any parameters have been
274 static void deferred_incoming_migration(Error
**errp
)
276 if (deferred_incoming
) {
277 error_setg(errp
, "Incoming migration already deferred");
279 deferred_incoming
= true;
282 /* Request a range of pages from the source VM at the given
284 * rbname: Name of the RAMBlock to request the page in, if NULL it's the same
285 * as the last request (a name must have been given previously)
286 * Start: Address offset within the RB
287 * Len: Length in bytes required - must be a multiple of pagesize
289 void migrate_send_rp_req_pages(MigrationIncomingState
*mis
, const char *rbname
,
290 ram_addr_t start
, size_t len
)
292 uint8_t bufc
[12 + 1 + 255]; /* start (8), len (4), rbname up to 256 */
293 size_t msglen
= 12; /* start + len */
295 *(uint64_t *)bufc
= cpu_to_be64((uint64_t)start
);
296 *(uint32_t *)(bufc
+ 8) = cpu_to_be32((uint32_t)len
);
299 int rbname_len
= strlen(rbname
);
300 assert(rbname_len
< 256);
302 bufc
[msglen
++] = rbname_len
;
303 memcpy(bufc
+ msglen
, rbname
, rbname_len
);
304 msglen
+= rbname_len
;
305 migrate_send_rp_message(mis
, MIG_RP_MSG_REQ_PAGES_ID
, msglen
, bufc
);
307 migrate_send_rp_message(mis
, MIG_RP_MSG_REQ_PAGES
, msglen
, bufc
);
311 void qemu_start_incoming_migration(const char *uri
, Error
**errp
)
315 qapi_event_send_migration(MIGRATION_STATUS_SETUP
, &error_abort
);
316 if (!strcmp(uri
, "defer")) {
317 deferred_incoming_migration(errp
);
318 } else if (strstart(uri
, "tcp:", &p
)) {
319 tcp_start_incoming_migration(p
, errp
);
321 } else if (strstart(uri
, "rdma:", &p
)) {
322 rdma_start_incoming_migration(p
, errp
);
324 } else if (strstart(uri
, "exec:", &p
)) {
325 exec_start_incoming_migration(p
, errp
);
326 } else if (strstart(uri
, "unix:", &p
)) {
327 unix_start_incoming_migration(p
, errp
);
328 } else if (strstart(uri
, "fd:", &p
)) {
329 fd_start_incoming_migration(p
, errp
);
331 error_setg(errp
, "unknown migration protocol: %s", uri
);
335 static void process_incoming_migration_bh(void *opaque
)
337 Error
*local_err
= NULL
;
338 MigrationIncomingState
*mis
= opaque
;
340 /* Make sure all file formats flush their mutable metadata */
341 bdrv_invalidate_cache_all(&local_err
);
343 migrate_set_state(&mis
->state
, MIGRATION_STATUS_ACTIVE
,
344 MIGRATION_STATUS_FAILED
);
345 error_report_err(local_err
);
346 migrate_decompress_threads_join();
351 * This must happen after all error conditions are dealt with and
352 * we're sure the VM is going to be running on this host.
354 qemu_announce_self();
356 /* If global state section was not received or we are in running
357 state, we need to obey autostart. Any other state is set with
360 if (!global_state_received() ||
361 global_state_get_runstate() == RUN_STATE_RUNNING
) {
365 runstate_set(RUN_STATE_PAUSED
);
368 runstate_set(global_state_get_runstate());
370 migrate_decompress_threads_join();
372 * This must happen after any state changes since as soon as an external
373 * observer sees this event they might start to prod at the VM assuming
376 migrate_set_state(&mis
->state
, MIGRATION_STATUS_ACTIVE
,
377 MIGRATION_STATUS_COMPLETED
);
378 qemu_bh_delete(mis
->bh
);
379 migration_incoming_state_destroy();
382 static void process_incoming_migration_co(void *opaque
)
384 QEMUFile
*f
= opaque
;
385 MigrationIncomingState
*mis
= migration_incoming_get_current();
389 mis
->from_src_file
= f
;
390 mis
->largest_page_size
= qemu_ram_pagesize_largest();
391 postcopy_state_set(POSTCOPY_INCOMING_NONE
);
392 migrate_set_state(&mis
->state
, MIGRATION_STATUS_NONE
,
393 MIGRATION_STATUS_ACTIVE
);
394 ret
= qemu_loadvm_state(f
);
396 ps
= postcopy_state_get();
397 trace_process_incoming_migration_co_end(ret
, ps
);
398 if (ps
!= POSTCOPY_INCOMING_NONE
) {
399 if (ps
== POSTCOPY_INCOMING_ADVISE
) {
401 * Where a migration had postcopy enabled (and thus went to advise)
402 * but managed to complete within the precopy period, we can use
405 postcopy_ram_incoming_cleanup(mis
);
406 } else if (ret
>= 0) {
408 * Postcopy was started, cleanup should happen at the end of the
411 trace_process_incoming_migration_co_postcopy_end_main();
414 /* Else if something went wrong then just fall out of the normal exit */
417 /* we get COLO info, and know if we are in COLO mode */
418 if (!ret
&& migration_incoming_enable_colo()) {
419 mis
->migration_incoming_co
= qemu_coroutine_self();
420 qemu_thread_create(&mis
->colo_incoming_thread
, "COLO incoming",
421 colo_process_incoming_thread
, mis
, QEMU_THREAD_JOINABLE
);
422 mis
->have_colo_incoming_thread
= true;
423 qemu_coroutine_yield();
425 /* Wait checkpoint incoming thread exit before free resource */
426 qemu_thread_join(&mis
->colo_incoming_thread
);
430 free_xbzrle_decoded_buf();
433 migrate_set_state(&mis
->state
, MIGRATION_STATUS_ACTIVE
,
434 MIGRATION_STATUS_FAILED
);
435 error_report("load of migration failed: %s", strerror(-ret
));
436 migrate_decompress_threads_join();
440 mis
->bh
= qemu_bh_new(process_incoming_migration_bh
, mis
);
441 qemu_bh_schedule(mis
->bh
);
444 void migration_fd_process_incoming(QEMUFile
*f
)
446 Coroutine
*co
= qemu_coroutine_create(process_incoming_migration_co
, f
);
448 migrate_decompress_threads_create();
449 qemu_file_set_blocking(f
, false);
450 qemu_coroutine_enter(co
);
454 void migration_channel_process_incoming(MigrationState
*s
,
457 trace_migration_set_incoming_channel(
458 ioc
, object_get_typename(OBJECT(ioc
)));
460 if (s
->parameters
.tls_creds
&&
461 !object_dynamic_cast(OBJECT(ioc
),
462 TYPE_QIO_CHANNEL_TLS
)) {
463 Error
*local_err
= NULL
;
464 migration_tls_channel_process_incoming(s
, ioc
, &local_err
);
466 error_report_err(local_err
);
469 QEMUFile
*f
= qemu_fopen_channel_input(ioc
);
470 migration_fd_process_incoming(f
);
475 void migration_channel_connect(MigrationState
*s
,
477 const char *hostname
)
479 trace_migration_set_outgoing_channel(
480 ioc
, object_get_typename(OBJECT(ioc
)), hostname
);
482 if (s
->parameters
.tls_creds
&&
483 !object_dynamic_cast(OBJECT(ioc
),
484 TYPE_QIO_CHANNEL_TLS
)) {
485 Error
*local_err
= NULL
;
486 migration_tls_channel_connect(s
, ioc
, hostname
, &local_err
);
488 migrate_fd_error(s
, local_err
);
489 error_free(local_err
);
492 QEMUFile
*f
= qemu_fopen_channel_output(ioc
);
496 migrate_fd_connect(s
);
502 * Send a message on the return channel back to the source
505 void migrate_send_rp_message(MigrationIncomingState
*mis
,
506 enum mig_rp_message_type message_type
,
507 uint16_t len
, void *data
)
509 trace_migrate_send_rp_message((int)message_type
, len
);
510 qemu_mutex_lock(&mis
->rp_mutex
);
511 qemu_put_be16(mis
->to_src_file
, (unsigned int)message_type
);
512 qemu_put_be16(mis
->to_src_file
, len
);
513 qemu_put_buffer(mis
->to_src_file
, data
, len
);
514 qemu_fflush(mis
->to_src_file
);
515 qemu_mutex_unlock(&mis
->rp_mutex
);
519 * Send a 'SHUT' message on the return channel with the given value
520 * to indicate that we've finished with the RP. Non-0 value indicates
523 void migrate_send_rp_shut(MigrationIncomingState
*mis
,
528 buf
= cpu_to_be32(value
);
529 migrate_send_rp_message(mis
, MIG_RP_MSG_SHUT
, sizeof(buf
), &buf
);
533 * Send a 'PONG' message on the return channel with the given value
534 * (normally in response to a 'PING')
536 void migrate_send_rp_pong(MigrationIncomingState
*mis
,
541 buf
= cpu_to_be32(value
);
542 migrate_send_rp_message(mis
, MIG_RP_MSG_PONG
, sizeof(buf
), &buf
);
545 MigrationCapabilityStatusList
*qmp_query_migrate_capabilities(Error
**errp
)
547 MigrationCapabilityStatusList
*head
= NULL
;
548 MigrationCapabilityStatusList
*caps
;
549 MigrationState
*s
= migrate_get_current();
552 caps
= NULL
; /* silence compiler warning */
553 for (i
= 0; i
< MIGRATION_CAPABILITY__MAX
; i
++) {
554 if (i
== MIGRATION_CAPABILITY_X_COLO
&& !colo_supported()) {
558 head
= g_malloc0(sizeof(*caps
));
561 caps
->next
= g_malloc0(sizeof(*caps
));
565 g_malloc(sizeof(*caps
->value
));
566 caps
->value
->capability
= i
;
567 caps
->value
->state
= s
->enabled_capabilities
[i
];
573 MigrationParameters
*qmp_query_migrate_parameters(Error
**errp
)
575 MigrationParameters
*params
;
576 MigrationState
*s
= migrate_get_current();
578 params
= g_malloc0(sizeof(*params
));
579 params
->has_compress_level
= true;
580 params
->compress_level
= s
->parameters
.compress_level
;
581 params
->has_compress_threads
= true;
582 params
->compress_threads
= s
->parameters
.compress_threads
;
583 params
->has_decompress_threads
= true;
584 params
->decompress_threads
= s
->parameters
.decompress_threads
;
585 params
->has_cpu_throttle_initial
= true;
586 params
->cpu_throttle_initial
= s
->parameters
.cpu_throttle_initial
;
587 params
->has_cpu_throttle_increment
= true;
588 params
->cpu_throttle_increment
= s
->parameters
.cpu_throttle_increment
;
589 params
->has_tls_creds
= !!s
->parameters
.tls_creds
;
590 params
->tls_creds
= g_strdup(s
->parameters
.tls_creds
);
591 params
->has_tls_hostname
= !!s
->parameters
.tls_hostname
;
592 params
->tls_hostname
= g_strdup(s
->parameters
.tls_hostname
);
593 params
->has_max_bandwidth
= true;
594 params
->max_bandwidth
= s
->parameters
.max_bandwidth
;
595 params
->has_downtime_limit
= true;
596 params
->downtime_limit
= s
->parameters
.downtime_limit
;
597 params
->has_x_checkpoint_delay
= true;
598 params
->x_checkpoint_delay
= s
->parameters
.x_checkpoint_delay
;
604 * Return true if we're already in the middle of a migration
605 * (i.e. any of the active or setup states)
607 static bool migration_is_setup_or_active(int state
)
610 case MIGRATION_STATUS_ACTIVE
:
611 case MIGRATION_STATUS_POSTCOPY_ACTIVE
:
612 case MIGRATION_STATUS_SETUP
:
621 static void get_xbzrle_cache_stats(MigrationInfo
*info
)
623 if (migrate_use_xbzrle()) {
624 info
->has_xbzrle_cache
= true;
625 info
->xbzrle_cache
= g_malloc0(sizeof(*info
->xbzrle_cache
));
626 info
->xbzrle_cache
->cache_size
= migrate_xbzrle_cache_size();
627 info
->xbzrle_cache
->bytes
= xbzrle_mig_bytes_transferred();
628 info
->xbzrle_cache
->pages
= xbzrle_mig_pages_transferred();
629 info
->xbzrle_cache
->cache_miss
= xbzrle_mig_pages_cache_miss();
630 info
->xbzrle_cache
->cache_miss_rate
= xbzrle_mig_cache_miss_rate();
631 info
->xbzrle_cache
->overflow
= xbzrle_mig_pages_overflow();
635 static void populate_ram_info(MigrationInfo
*info
, MigrationState
*s
)
637 info
->has_ram
= true;
638 info
->ram
= g_malloc0(sizeof(*info
->ram
));
639 info
->ram
->transferred
= ram_bytes_transferred();
640 info
->ram
->total
= ram_bytes_total();
641 info
->ram
->duplicate
= dup_mig_pages_transferred();
642 info
->ram
->skipped
= skipped_mig_pages_transferred();
643 info
->ram
->normal
= norm_mig_pages_transferred();
644 info
->ram
->normal_bytes
= norm_mig_bytes_transferred();
645 info
->ram
->mbps
= s
->mbps
;
646 info
->ram
->dirty_sync_count
= s
->dirty_sync_count
;
647 info
->ram
->postcopy_requests
= s
->postcopy_requests
;
649 if (s
->state
!= MIGRATION_STATUS_COMPLETED
) {
650 info
->ram
->remaining
= ram_bytes_remaining();
651 info
->ram
->dirty_pages_rate
= s
->dirty_pages_rate
;
655 MigrationInfo
*qmp_query_migrate(Error
**errp
)
657 MigrationInfo
*info
= g_malloc0(sizeof(*info
));
658 MigrationState
*s
= migrate_get_current();
661 case MIGRATION_STATUS_NONE
:
662 /* no migration has happened ever */
664 case MIGRATION_STATUS_SETUP
:
665 info
->has_status
= true;
666 info
->has_total_time
= false;
668 case MIGRATION_STATUS_ACTIVE
:
669 case MIGRATION_STATUS_CANCELLING
:
670 info
->has_status
= true;
671 info
->has_total_time
= true;
672 info
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
)
674 info
->has_expected_downtime
= true;
675 info
->expected_downtime
= s
->expected_downtime
;
676 info
->has_setup_time
= true;
677 info
->setup_time
= s
->setup_time
;
679 populate_ram_info(info
, s
);
681 if (blk_mig_active()) {
682 info
->has_disk
= true;
683 info
->disk
= g_malloc0(sizeof(*info
->disk
));
684 info
->disk
->transferred
= blk_mig_bytes_transferred();
685 info
->disk
->remaining
= blk_mig_bytes_remaining();
686 info
->disk
->total
= blk_mig_bytes_total();
689 if (cpu_throttle_active()) {
690 info
->has_cpu_throttle_percentage
= true;
691 info
->cpu_throttle_percentage
= cpu_throttle_get_percentage();
694 get_xbzrle_cache_stats(info
);
696 case MIGRATION_STATUS_POSTCOPY_ACTIVE
:
697 /* Mostly the same as active; TODO add some postcopy stats */
698 info
->has_status
= true;
699 info
->has_total_time
= true;
700 info
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
)
702 info
->has_expected_downtime
= true;
703 info
->expected_downtime
= s
->expected_downtime
;
704 info
->has_setup_time
= true;
705 info
->setup_time
= s
->setup_time
;
707 populate_ram_info(info
, s
);
709 if (blk_mig_active()) {
710 info
->has_disk
= true;
711 info
->disk
= g_malloc0(sizeof(*info
->disk
));
712 info
->disk
->transferred
= blk_mig_bytes_transferred();
713 info
->disk
->remaining
= blk_mig_bytes_remaining();
714 info
->disk
->total
= blk_mig_bytes_total();
717 get_xbzrle_cache_stats(info
);
719 case MIGRATION_STATUS_COLO
:
720 info
->has_status
= true;
721 /* TODO: display COLO specific information (checkpoint info etc.) */
723 case MIGRATION_STATUS_COMPLETED
:
724 get_xbzrle_cache_stats(info
);
726 info
->has_status
= true;
727 info
->has_total_time
= true;
728 info
->total_time
= s
->total_time
;
729 info
->has_downtime
= true;
730 info
->downtime
= s
->downtime
;
731 info
->has_setup_time
= true;
732 info
->setup_time
= s
->setup_time
;
734 populate_ram_info(info
, s
);
736 case MIGRATION_STATUS_FAILED
:
737 info
->has_status
= true;
739 info
->has_error_desc
= true;
740 info
->error_desc
= g_strdup(error_get_pretty(s
->error
));
743 case MIGRATION_STATUS_CANCELLED
:
744 info
->has_status
= true;
747 info
->status
= s
->state
;
752 void qmp_migrate_set_capabilities(MigrationCapabilityStatusList
*params
,
755 MigrationState
*s
= migrate_get_current();
756 MigrationCapabilityStatusList
*cap
;
757 bool old_postcopy_cap
= migrate_postcopy_ram();
759 if (migration_is_setup_or_active(s
->state
)) {
760 error_setg(errp
, QERR_MIGRATION_ACTIVE
);
764 for (cap
= params
; cap
; cap
= cap
->next
) {
765 if (cap
->value
->capability
== MIGRATION_CAPABILITY_X_COLO
) {
766 if (!colo_supported()) {
767 error_setg(errp
, "COLO is not currently supported, please"
768 " configure with --enable-colo option in order to"
769 " support COLO feature");
773 s
->enabled_capabilities
[cap
->value
->capability
] = cap
->value
->state
;
776 if (migrate_postcopy_ram()) {
777 if (migrate_use_compression()) {
778 /* The decompression threads asynchronously write into RAM
779 * rather than use the atomic copies needed to avoid
780 * userfaulting. It should be possible to fix the decompression
781 * threads for compatibility in future.
783 error_report("Postcopy is not currently compatible with "
785 s
->enabled_capabilities
[MIGRATION_CAPABILITY_POSTCOPY_RAM
] =
788 /* This check is reasonably expensive, so only when it's being
789 * set the first time, also it's only the destination that needs
792 if (!old_postcopy_cap
&& runstate_check(RUN_STATE_INMIGRATE
) &&
793 !postcopy_ram_supported_by_host()) {
794 /* postcopy_ram_supported_by_host will have emitted a more
797 error_report("Postcopy is not supported");
798 s
->enabled_capabilities
[MIGRATION_CAPABILITY_POSTCOPY_RAM
] =
804 void qmp_migrate_set_parameters(MigrationParameters
*params
, Error
**errp
)
806 MigrationState
*s
= migrate_get_current();
808 if (params
->has_compress_level
&&
809 (params
->compress_level
< 0 || params
->compress_level
> 9)) {
810 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "compress_level",
811 "is invalid, it should be in the range of 0 to 9");
814 if (params
->has_compress_threads
&&
815 (params
->compress_threads
< 1 || params
->compress_threads
> 255)) {
816 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
818 "is invalid, it should be in the range of 1 to 255");
821 if (params
->has_decompress_threads
&&
822 (params
->decompress_threads
< 1 || params
->decompress_threads
> 255)) {
823 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
824 "decompress_threads",
825 "is invalid, it should be in the range of 1 to 255");
828 if (params
->has_cpu_throttle_initial
&&
829 (params
->cpu_throttle_initial
< 1 ||
830 params
->cpu_throttle_initial
> 99)) {
831 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
832 "cpu_throttle_initial",
833 "an integer in the range of 1 to 99");
836 if (params
->has_cpu_throttle_increment
&&
837 (params
->cpu_throttle_increment
< 1 ||
838 params
->cpu_throttle_increment
> 99)) {
839 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
840 "cpu_throttle_increment",
841 "an integer in the range of 1 to 99");
844 if (params
->has_max_bandwidth
&&
845 (params
->max_bandwidth
< 0 || params
->max_bandwidth
> SIZE_MAX
)) {
846 error_setg(errp
, "Parameter 'max_bandwidth' expects an integer in the"
847 " range of 0 to %zu bytes/second", SIZE_MAX
);
850 if (params
->has_downtime_limit
&&
851 (params
->downtime_limit
< 0 ||
852 params
->downtime_limit
> MAX_MIGRATE_DOWNTIME
)) {
853 error_setg(errp
, "Parameter 'downtime_limit' expects an integer in "
854 "the range of 0 to %d milliseconds",
855 MAX_MIGRATE_DOWNTIME
);
858 if (params
->has_x_checkpoint_delay
&& (params
->x_checkpoint_delay
< 0)) {
859 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
,
860 "x_checkpoint_delay",
861 "is invalid, it should be positive");
864 if (params
->has_compress_level
) {
865 s
->parameters
.compress_level
= params
->compress_level
;
867 if (params
->has_compress_threads
) {
868 s
->parameters
.compress_threads
= params
->compress_threads
;
870 if (params
->has_decompress_threads
) {
871 s
->parameters
.decompress_threads
= params
->decompress_threads
;
873 if (params
->has_cpu_throttle_initial
) {
874 s
->parameters
.cpu_throttle_initial
= params
->cpu_throttle_initial
;
876 if (params
->has_cpu_throttle_increment
) {
877 s
->parameters
.cpu_throttle_increment
= params
->cpu_throttle_increment
;
879 if (params
->has_tls_creds
) {
880 g_free(s
->parameters
.tls_creds
);
881 s
->parameters
.tls_creds
= g_strdup(params
->tls_creds
);
883 if (params
->has_tls_hostname
) {
884 g_free(s
->parameters
.tls_hostname
);
885 s
->parameters
.tls_hostname
= g_strdup(params
->tls_hostname
);
887 if (params
->has_max_bandwidth
) {
888 s
->parameters
.max_bandwidth
= params
->max_bandwidth
;
889 if (s
->to_dst_file
) {
890 qemu_file_set_rate_limit(s
->to_dst_file
,
891 s
->parameters
.max_bandwidth
/ XFER_LIMIT_RATIO
);
894 if (params
->has_downtime_limit
) {
895 s
->parameters
.downtime_limit
= params
->downtime_limit
;
898 if (params
->has_x_checkpoint_delay
) {
899 s
->parameters
.x_checkpoint_delay
= params
->x_checkpoint_delay
;
900 if (migration_in_colo_state()) {
901 colo_checkpoint_notify(s
);
907 void qmp_migrate_start_postcopy(Error
**errp
)
909 MigrationState
*s
= migrate_get_current();
911 if (!migrate_postcopy_ram()) {
912 error_setg(errp
, "Enable postcopy with migrate_set_capability before"
913 " the start of migration");
917 if (s
->state
== MIGRATION_STATUS_NONE
) {
918 error_setg(errp
, "Postcopy must be started after migration has been"
923 * we don't error if migration has finished since that would be racy
924 * with issuing this command.
926 atomic_set(&s
->start_postcopy
, true);
929 /* shared migration helpers */
931 void migrate_set_state(int *state
, int old_state
, int new_state
)
933 if (atomic_cmpxchg(state
, old_state
, new_state
) == old_state
) {
934 trace_migrate_set_state(new_state
);
935 migrate_generate_event(new_state
);
939 static void migrate_fd_cleanup(void *opaque
)
941 MigrationState
*s
= opaque
;
943 qemu_bh_delete(s
->cleanup_bh
);
944 s
->cleanup_bh
= NULL
;
948 if (s
->to_dst_file
) {
949 trace_migrate_fd_cleanup();
950 qemu_mutex_unlock_iothread();
951 if (s
->migration_thread_running
) {
952 qemu_thread_join(&s
->thread
);
953 s
->migration_thread_running
= false;
955 qemu_mutex_lock_iothread();
957 migrate_compress_threads_join();
958 qemu_fclose(s
->to_dst_file
);
959 s
->to_dst_file
= NULL
;
962 assert((s
->state
!= MIGRATION_STATUS_ACTIVE
) &&
963 (s
->state
!= MIGRATION_STATUS_POSTCOPY_ACTIVE
));
965 if (s
->state
== MIGRATION_STATUS_CANCELLING
) {
966 migrate_set_state(&s
->state
, MIGRATION_STATUS_CANCELLING
,
967 MIGRATION_STATUS_CANCELLED
);
970 notifier_list_notify(&migration_state_notifiers
, s
);
973 void migrate_fd_error(MigrationState
*s
, const Error
*error
)
975 trace_migrate_fd_error(error_get_pretty(error
));
976 assert(s
->to_dst_file
== NULL
);
977 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
978 MIGRATION_STATUS_FAILED
);
980 s
->error
= error_copy(error
);
982 notifier_list_notify(&migration_state_notifiers
, s
);
985 static void migrate_fd_cancel(MigrationState
*s
)
988 QEMUFile
*f
= migrate_get_current()->to_dst_file
;
989 trace_migrate_fd_cancel();
991 if (s
->rp_state
.from_dst_file
) {
992 /* shutdown the rp socket, so causing the rp thread to shutdown */
993 qemu_file_shutdown(s
->rp_state
.from_dst_file
);
997 old_state
= s
->state
;
998 if (!migration_is_setup_or_active(old_state
)) {
1001 migrate_set_state(&s
->state
, old_state
, MIGRATION_STATUS_CANCELLING
);
1002 } while (s
->state
!= MIGRATION_STATUS_CANCELLING
);
1005 * If we're unlucky the migration code might be stuck somewhere in a
1006 * send/write while the network has failed and is waiting to timeout;
1007 * if we've got shutdown(2) available then we can force it to quit.
1008 * The outgoing qemu file gets closed in migrate_fd_cleanup that is
1009 * called in a bh, so there is no race against this cancel.
1011 if (s
->state
== MIGRATION_STATUS_CANCELLING
&& f
) {
1012 qemu_file_shutdown(f
);
1014 if (s
->state
== MIGRATION_STATUS_CANCELLING
&& s
->block_inactive
) {
1015 Error
*local_err
= NULL
;
1017 bdrv_invalidate_cache_all(&local_err
);
1019 error_report_err(local_err
);
1021 s
->block_inactive
= false;
1026 void add_migration_state_change_notifier(Notifier
*notify
)
1028 notifier_list_add(&migration_state_notifiers
, notify
);
1031 void remove_migration_state_change_notifier(Notifier
*notify
)
1033 notifier_remove(notify
);
1036 bool migration_in_setup(MigrationState
*s
)
1038 return s
->state
== MIGRATION_STATUS_SETUP
;
1041 bool migration_has_finished(MigrationState
*s
)
1043 return s
->state
== MIGRATION_STATUS_COMPLETED
;
1046 bool migration_has_failed(MigrationState
*s
)
1048 return (s
->state
== MIGRATION_STATUS_CANCELLED
||
1049 s
->state
== MIGRATION_STATUS_FAILED
);
1052 bool migration_in_postcopy(MigrationState
*s
)
1054 return (s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
);
1057 bool migration_in_postcopy_after_devices(MigrationState
*s
)
1059 return migration_in_postcopy(s
) && s
->postcopy_after_devices
;
1062 bool migration_is_idle(MigrationState
*s
)
1065 s
= migrate_get_current();
1069 case MIGRATION_STATUS_NONE
:
1070 case MIGRATION_STATUS_CANCELLED
:
1071 case MIGRATION_STATUS_COMPLETED
:
1072 case MIGRATION_STATUS_FAILED
:
1074 case MIGRATION_STATUS_SETUP
:
1075 case MIGRATION_STATUS_CANCELLING
:
1076 case MIGRATION_STATUS_ACTIVE
:
1077 case MIGRATION_STATUS_POSTCOPY_ACTIVE
:
1078 case MIGRATION_STATUS_COLO
:
1080 case MIGRATION_STATUS__MAX
:
1081 g_assert_not_reached();
1087 MigrationState
*migrate_init(const MigrationParams
*params
)
1089 MigrationState
*s
= migrate_get_current();
1092 * Reinitialise all migration state, except
1093 * parameters/capabilities that the user set, and
1099 s
->to_dst_file
= NULL
;
1100 s
->state
= MIGRATION_STATUS_NONE
;
1101 s
->params
= *params
;
1102 s
->rp_state
.from_dst_file
= NULL
;
1103 s
->rp_state
.error
= false;
1106 s
->expected_downtime
= 0;
1107 s
->dirty_pages_rate
= 0;
1108 s
->dirty_bytes_rate
= 0;
1110 s
->dirty_sync_count
= 0;
1111 s
->start_postcopy
= false;
1112 s
->postcopy_after_devices
= false;
1113 s
->postcopy_requests
= 0;
1114 s
->migration_thread_running
= false;
1115 s
->last_req_rb
= NULL
;
1116 error_free(s
->error
);
1119 migrate_set_state(&s
->state
, MIGRATION_STATUS_NONE
, MIGRATION_STATUS_SETUP
);
1121 QSIMPLEQ_INIT(&s
->src_page_requests
);
1123 s
->total_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1127 static GSList
*migration_blockers
;
1129 int migrate_add_blocker(Error
*reason
, Error
**errp
)
1131 if (only_migratable
) {
1132 error_propagate(errp
, error_copy(reason
));
1133 error_prepend(errp
, "disallowing migration blocker "
1134 "(--only_migratable) for: ");
1138 if (migration_is_idle(NULL
)) {
1139 migration_blockers
= g_slist_prepend(migration_blockers
, reason
);
1143 error_propagate(errp
, error_copy(reason
));
1144 error_prepend(errp
, "disallowing migration blocker (migration in "
1149 void migrate_del_blocker(Error
*reason
)
1151 migration_blockers
= g_slist_remove(migration_blockers
, reason
);
1154 int check_migratable(Object
*obj
, Error
**err
)
1156 DeviceClass
*dc
= DEVICE_GET_CLASS(obj
);
1157 if (only_migratable
&& dc
->vmsd
) {
1158 if (dc
->vmsd
->unmigratable
) {
1159 error_setg(err
, "Device %s is not migratable, but "
1160 "--only-migratable was specified",
1161 object_get_typename(obj
));
1169 void qmp_migrate_incoming(const char *uri
, Error
**errp
)
1171 Error
*local_err
= NULL
;
1172 static bool once
= true;
1174 if (!deferred_incoming
) {
1175 error_setg(errp
, "For use with '-incoming defer'");
1179 error_setg(errp
, "The incoming migration has already been started");
1182 qemu_start_incoming_migration(uri
, &local_err
);
1185 error_propagate(errp
, local_err
);
1192 bool migration_is_blocked(Error
**errp
)
1194 if (qemu_savevm_state_blocked(errp
)) {
1198 if (migration_blockers
) {
1199 *errp
= error_copy(migration_blockers
->data
);
1206 void qmp_migrate(const char *uri
, bool has_blk
, bool blk
,
1207 bool has_inc
, bool inc
, bool has_detach
, bool detach
,
1210 Error
*local_err
= NULL
;
1211 MigrationState
*s
= migrate_get_current();
1212 MigrationParams params
;
1215 params
.blk
= has_blk
&& blk
;
1216 params
.shared
= has_inc
&& inc
;
1218 if (migration_is_setup_or_active(s
->state
) ||
1219 s
->state
== MIGRATION_STATUS_CANCELLING
||
1220 s
->state
== MIGRATION_STATUS_COLO
) {
1221 error_setg(errp
, QERR_MIGRATION_ACTIVE
);
1224 if (runstate_check(RUN_STATE_INMIGRATE
)) {
1225 error_setg(errp
, "Guest is waiting for an incoming migration");
1229 if (migration_is_blocked(errp
)) {
1233 s
= migrate_init(¶ms
);
1235 if (strstart(uri
, "tcp:", &p
)) {
1236 tcp_start_outgoing_migration(s
, p
, &local_err
);
1238 } else if (strstart(uri
, "rdma:", &p
)) {
1239 rdma_start_outgoing_migration(s
, p
, &local_err
);
1241 } else if (strstart(uri
, "exec:", &p
)) {
1242 exec_start_outgoing_migration(s
, p
, &local_err
);
1243 } else if (strstart(uri
, "unix:", &p
)) {
1244 unix_start_outgoing_migration(s
, p
, &local_err
);
1245 } else if (strstart(uri
, "fd:", &p
)) {
1246 fd_start_outgoing_migration(s
, p
, &local_err
);
1248 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "uri",
1249 "a valid migration protocol");
1250 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
1251 MIGRATION_STATUS_FAILED
);
1256 migrate_fd_error(s
, local_err
);
1257 error_propagate(errp
, local_err
);
1262 void qmp_migrate_cancel(Error
**errp
)
1264 migrate_fd_cancel(migrate_get_current());
1267 void qmp_migrate_set_cache_size(int64_t value
, Error
**errp
)
1269 MigrationState
*s
= migrate_get_current();
1272 /* Check for truncation */
1273 if (value
!= (size_t)value
) {
1274 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1275 "exceeding address space");
1279 /* Cache should not be larger than guest ram size */
1280 if (value
> ram_bytes_total()) {
1281 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1282 "exceeds guest ram size ");
1286 new_size
= xbzrle_cache_resize(value
);
1288 error_setg(errp
, QERR_INVALID_PARAMETER_VALUE
, "cache size",
1289 "is smaller than page size");
1293 s
->xbzrle_cache_size
= new_size
;
1296 int64_t qmp_query_migrate_cache_size(Error
**errp
)
1298 return migrate_xbzrle_cache_size();
1301 void qmp_migrate_set_speed(int64_t value
, Error
**errp
)
1303 MigrationParameters p
= {
1304 .has_max_bandwidth
= true,
1305 .max_bandwidth
= value
,
1308 qmp_migrate_set_parameters(&p
, errp
);
1311 void qmp_migrate_set_downtime(double value
, Error
**errp
)
1313 if (value
< 0 || value
> MAX_MIGRATE_DOWNTIME_SECONDS
) {
1314 error_setg(errp
, "Parameter 'downtime_limit' expects an integer in "
1315 "the range of 0 to %d seconds",
1316 MAX_MIGRATE_DOWNTIME_SECONDS
);
1320 value
*= 1000; /* Convert to milliseconds */
1321 value
= MAX(0, MIN(INT64_MAX
, value
));
1323 MigrationParameters p
= {
1324 .has_downtime_limit
= true,
1325 .downtime_limit
= value
,
1328 qmp_migrate_set_parameters(&p
, errp
);
1331 bool migrate_release_ram(void)
1335 s
= migrate_get_current();
1337 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_RELEASE_RAM
];
1340 bool migrate_postcopy_ram(void)
1344 s
= migrate_get_current();
1346 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_POSTCOPY_RAM
];
1349 bool migrate_auto_converge(void)
1353 s
= migrate_get_current();
1355 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_AUTO_CONVERGE
];
1358 bool migrate_zero_blocks(void)
1362 s
= migrate_get_current();
1364 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_ZERO_BLOCKS
];
1367 bool migrate_use_compression(void)
1371 s
= migrate_get_current();
1373 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_COMPRESS
];
1376 int migrate_compress_level(void)
1380 s
= migrate_get_current();
1382 return s
->parameters
.compress_level
;
1385 int migrate_compress_threads(void)
1389 s
= migrate_get_current();
1391 return s
->parameters
.compress_threads
;
1394 int migrate_decompress_threads(void)
1398 s
= migrate_get_current();
1400 return s
->parameters
.decompress_threads
;
1403 bool migrate_use_events(void)
1407 s
= migrate_get_current();
1409 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_EVENTS
];
1412 int migrate_use_xbzrle(void)
1416 s
= migrate_get_current();
1418 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_XBZRLE
];
1421 int64_t migrate_xbzrle_cache_size(void)
1425 s
= migrate_get_current();
1427 return s
->xbzrle_cache_size
;
1430 /* migration thread support */
1432 * Something bad happened to the RP stream, mark an error
1433 * The caller shall print or trace something to indicate why
1435 static void mark_source_rp_bad(MigrationState
*s
)
1437 s
->rp_state
.error
= true;
1440 static struct rp_cmd_args
{
1441 ssize_t len
; /* -1 = variable */
1444 [MIG_RP_MSG_INVALID
] = { .len
= -1, .name
= "INVALID" },
1445 [MIG_RP_MSG_SHUT
] = { .len
= 4, .name
= "SHUT" },
1446 [MIG_RP_MSG_PONG
] = { .len
= 4, .name
= "PONG" },
1447 [MIG_RP_MSG_REQ_PAGES
] = { .len
= 12, .name
= "REQ_PAGES" },
1448 [MIG_RP_MSG_REQ_PAGES_ID
] = { .len
= -1, .name
= "REQ_PAGES_ID" },
1449 [MIG_RP_MSG_MAX
] = { .len
= -1, .name
= "MAX" },
1453 * Process a request for pages received on the return path,
1454 * We're allowed to send more than requested (e.g. to round to our page size)
1455 * and we don't need to send pages that have already been sent.
1457 static void migrate_handle_rp_req_pages(MigrationState
*ms
, const char* rbname
,
1458 ram_addr_t start
, size_t len
)
1460 long our_host_ps
= getpagesize();
1462 trace_migrate_handle_rp_req_pages(rbname
, start
, len
);
1465 * Since we currently insist on matching page sizes, just sanity check
1466 * we're being asked for whole host pages.
1468 if (start
& (our_host_ps
-1) ||
1469 (len
& (our_host_ps
-1))) {
1470 error_report("%s: Misaligned page request, start: " RAM_ADDR_FMT
1471 " len: %zd", __func__
, start
, len
);
1472 mark_source_rp_bad(ms
);
1476 if (ram_save_queue_pages(ms
, rbname
, start
, len
)) {
1477 mark_source_rp_bad(ms
);
1482 * Handles messages sent on the return path towards the source VM
1485 static void *source_return_path_thread(void *opaque
)
1487 MigrationState
*ms
= opaque
;
1488 QEMUFile
*rp
= ms
->rp_state
.from_dst_file
;
1489 uint16_t header_len
, header_type
;
1491 uint32_t tmp32
, sibling_error
;
1492 ram_addr_t start
= 0; /* =0 to silence warning */
1493 size_t len
= 0, expected_len
;
1496 trace_source_return_path_thread_entry();
1497 while (!ms
->rp_state
.error
&& !qemu_file_get_error(rp
) &&
1498 migration_is_setup_or_active(ms
->state
)) {
1499 trace_source_return_path_thread_loop_top();
1500 header_type
= qemu_get_be16(rp
);
1501 header_len
= qemu_get_be16(rp
);
1503 if (header_type
>= MIG_RP_MSG_MAX
||
1504 header_type
== MIG_RP_MSG_INVALID
) {
1505 error_report("RP: Received invalid message 0x%04x length 0x%04x",
1506 header_type
, header_len
);
1507 mark_source_rp_bad(ms
);
1511 if ((rp_cmd_args
[header_type
].len
!= -1 &&
1512 header_len
!= rp_cmd_args
[header_type
].len
) ||
1513 header_len
> sizeof(buf
)) {
1514 error_report("RP: Received '%s' message (0x%04x) with"
1515 "incorrect length %d expecting %zu",
1516 rp_cmd_args
[header_type
].name
, header_type
, header_len
,
1517 (size_t)rp_cmd_args
[header_type
].len
);
1518 mark_source_rp_bad(ms
);
1522 /* We know we've got a valid header by this point */
1523 res
= qemu_get_buffer(rp
, buf
, header_len
);
1524 if (res
!= header_len
) {
1525 error_report("RP: Failed reading data for message 0x%04x"
1526 " read %d expected %d",
1527 header_type
, res
, header_len
);
1528 mark_source_rp_bad(ms
);
1532 /* OK, we have the message and the data */
1533 switch (header_type
) {
1534 case MIG_RP_MSG_SHUT
:
1535 sibling_error
= ldl_be_p(buf
);
1536 trace_source_return_path_thread_shut(sibling_error
);
1537 if (sibling_error
) {
1538 error_report("RP: Sibling indicated error %d", sibling_error
);
1539 mark_source_rp_bad(ms
);
1542 * We'll let the main thread deal with closing the RP
1543 * we could do a shutdown(2) on it, but we're the only user
1544 * anyway, so there's nothing gained.
1548 case MIG_RP_MSG_PONG
:
1549 tmp32
= ldl_be_p(buf
);
1550 trace_source_return_path_thread_pong(tmp32
);
1553 case MIG_RP_MSG_REQ_PAGES
:
1554 start
= ldq_be_p(buf
);
1555 len
= ldl_be_p(buf
+ 8);
1556 migrate_handle_rp_req_pages(ms
, NULL
, start
, len
);
1559 case MIG_RP_MSG_REQ_PAGES_ID
:
1560 expected_len
= 12 + 1; /* header + termination */
1562 if (header_len
>= expected_len
) {
1563 start
= ldq_be_p(buf
);
1564 len
= ldl_be_p(buf
+ 8);
1565 /* Now we expect an idstr */
1566 tmp32
= buf
[12]; /* Length of the following idstr */
1567 buf
[13 + tmp32
] = '\0';
1568 expected_len
+= tmp32
;
1570 if (header_len
!= expected_len
) {
1571 error_report("RP: Req_Page_id with length %d expecting %zd",
1572 header_len
, expected_len
);
1573 mark_source_rp_bad(ms
);
1576 migrate_handle_rp_req_pages(ms
, (char *)&buf
[13], start
, len
);
1583 if (qemu_file_get_error(rp
)) {
1584 trace_source_return_path_thread_bad_end();
1585 mark_source_rp_bad(ms
);
1588 trace_source_return_path_thread_end();
1590 ms
->rp_state
.from_dst_file
= NULL
;
1595 static int open_return_path_on_source(MigrationState
*ms
)
1598 ms
->rp_state
.from_dst_file
= qemu_file_get_return_path(ms
->to_dst_file
);
1599 if (!ms
->rp_state
.from_dst_file
) {
1603 trace_open_return_path_on_source();
1604 qemu_thread_create(&ms
->rp_state
.rp_thread
, "return path",
1605 source_return_path_thread
, ms
, QEMU_THREAD_JOINABLE
);
1607 trace_open_return_path_on_source_continue();
1612 /* Returns 0 if the RP was ok, otherwise there was an error on the RP */
1613 static int await_return_path_close_on_source(MigrationState
*ms
)
1616 * If this is a normal exit then the destination will send a SHUT and the
1617 * rp_thread will exit, however if there's an error we need to cause
1620 if (qemu_file_get_error(ms
->to_dst_file
) && ms
->rp_state
.from_dst_file
) {
1622 * shutdown(2), if we have it, will cause it to unblock if it's stuck
1623 * waiting for the destination.
1625 qemu_file_shutdown(ms
->rp_state
.from_dst_file
);
1626 mark_source_rp_bad(ms
);
1628 trace_await_return_path_close_on_source_joining();
1629 qemu_thread_join(&ms
->rp_state
.rp_thread
);
1630 trace_await_return_path_close_on_source_close();
1631 return ms
->rp_state
.error
;
1635 * Switch from normal iteration to postcopy
1636 * Returns non-0 on error
1638 static int postcopy_start(MigrationState
*ms
, bool *old_vm_running
)
1641 QIOChannelBuffer
*bioc
;
1643 int64_t time_at_stop
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1644 bool restart_block
= false;
1645 migrate_set_state(&ms
->state
, MIGRATION_STATUS_ACTIVE
,
1646 MIGRATION_STATUS_POSTCOPY_ACTIVE
);
1648 trace_postcopy_start();
1649 qemu_mutex_lock_iothread();
1650 trace_postcopy_start_set_run();
1652 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER
);
1653 *old_vm_running
= runstate_is_running();
1654 global_state_store();
1655 ret
= vm_stop_force_state(RUN_STATE_FINISH_MIGRATE
);
1660 ret
= bdrv_inactivate_all();
1664 restart_block
= true;
1667 * Cause any non-postcopiable, but iterative devices to
1668 * send out their final data.
1670 qemu_savevm_state_complete_precopy(ms
->to_dst_file
, true);
1673 * in Finish migrate and with the io-lock held everything should
1674 * be quiet, but we've potentially still got dirty pages and we
1675 * need to tell the destination to throw any pages it's already received
1678 if (ram_postcopy_send_discard_bitmap(ms
)) {
1679 error_report("postcopy send discard bitmap failed");
1684 * send rest of state - note things that are doing postcopy
1685 * will notice we're in POSTCOPY_ACTIVE and not actually
1686 * wrap their state up here
1688 qemu_file_set_rate_limit(ms
->to_dst_file
, INT64_MAX
);
1689 /* Ping just for debugging, helps line traces up */
1690 qemu_savevm_send_ping(ms
->to_dst_file
, 2);
1693 * While loading the device state we may trigger page transfer
1694 * requests and the fd must be free to process those, and thus
1695 * the destination must read the whole device state off the fd before
1696 * it starts processing it. Unfortunately the ad-hoc migration format
1697 * doesn't allow the destination to know the size to read without fully
1698 * parsing it through each devices load-state code (especially the open
1699 * coded devices that use get/put).
1700 * So we wrap the device state up in a package with a length at the start;
1701 * to do this we use a qemu_buf to hold the whole of the device state.
1703 bioc
= qio_channel_buffer_new(4096);
1704 qio_channel_set_name(QIO_CHANNEL(bioc
), "migration-postcopy-buffer");
1705 fb
= qemu_fopen_channel_output(QIO_CHANNEL(bioc
));
1706 object_unref(OBJECT(bioc
));
1709 * Make sure the receiver can get incoming pages before we send the rest
1712 qemu_savevm_send_postcopy_listen(fb
);
1714 qemu_savevm_state_complete_precopy(fb
, false);
1715 qemu_savevm_send_ping(fb
, 3);
1717 qemu_savevm_send_postcopy_run(fb
);
1719 /* <><> end of stuff going into the package */
1721 /* Last point of recovery; as soon as we send the package the destination
1722 * can open devices and potentially start running.
1723 * Lets just check again we've not got any errors.
1725 ret
= qemu_file_get_error(ms
->to_dst_file
);
1727 error_report("postcopy_start: Migration stream errored (pre package)");
1731 restart_block
= false;
1733 /* Now send that blob */
1734 if (qemu_savevm_send_packaged(ms
->to_dst_file
, bioc
->data
, bioc
->usage
)) {
1739 /* Send a notify to give a chance for anything that needs to happen
1740 * at the transition to postcopy and after the device state; in particular
1741 * spice needs to trigger a transition now
1743 ms
->postcopy_after_devices
= true;
1744 notifier_list_notify(&migration_state_notifiers
, ms
);
1746 ms
->downtime
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
) - time_at_stop
;
1748 qemu_mutex_unlock_iothread();
1751 * Although this ping is just for debug, it could potentially be
1752 * used for getting a better measurement of downtime at the source.
1754 qemu_savevm_send_ping(ms
->to_dst_file
, 4);
1756 if (migrate_release_ram()) {
1757 ram_postcopy_migrated_memory_release(ms
);
1760 ret
= qemu_file_get_error(ms
->to_dst_file
);
1762 error_report("postcopy_start: Migration stream errored");
1763 migrate_set_state(&ms
->state
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1764 MIGRATION_STATUS_FAILED
);
1772 migrate_set_state(&ms
->state
, MIGRATION_STATUS_POSTCOPY_ACTIVE
,
1773 MIGRATION_STATUS_FAILED
);
1774 if (restart_block
) {
1775 /* A failure happened early enough that we know the destination hasn't
1776 * accessed block devices, so we're safe to recover.
1778 Error
*local_err
= NULL
;
1780 bdrv_invalidate_cache_all(&local_err
);
1782 error_report_err(local_err
);
1785 qemu_mutex_unlock_iothread();
1790 * migration_completion: Used by migration_thread when there's not much left.
1791 * The caller 'breaks' the loop when this returns.
1793 * @s: Current migration state
1794 * @current_active_state: The migration state we expect to be in
1795 * @*old_vm_running: Pointer to old_vm_running flag
1796 * @*start_time: Pointer to time to update
1798 static void migration_completion(MigrationState
*s
, int current_active_state
,
1799 bool *old_vm_running
,
1800 int64_t *start_time
)
1804 if (s
->state
== MIGRATION_STATUS_ACTIVE
) {
1805 qemu_mutex_lock_iothread();
1806 *start_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1807 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER
);
1808 *old_vm_running
= runstate_is_running();
1809 ret
= global_state_store();
1812 ret
= vm_stop_force_state(RUN_STATE_FINISH_MIGRATE
);
1814 * Don't mark the image with BDRV_O_INACTIVE flag if
1815 * we will go into COLO stage later.
1817 if (ret
>= 0 && !migrate_colo_enabled()) {
1818 ret
= bdrv_inactivate_all();
1821 qemu_file_set_rate_limit(s
->to_dst_file
, INT64_MAX
);
1822 qemu_savevm_state_complete_precopy(s
->to_dst_file
, false);
1823 s
->block_inactive
= true;
1826 qemu_mutex_unlock_iothread();
1831 } else if (s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
) {
1832 trace_migration_completion_postcopy_end();
1834 qemu_savevm_state_complete_postcopy(s
->to_dst_file
);
1835 trace_migration_completion_postcopy_end_after_complete();
1839 * If rp was opened we must clean up the thread before
1840 * cleaning everything else up (since if there are no failures
1841 * it will wait for the destination to send it's status in
1843 * Postcopy opens rp if enabled (even if it's not avtivated)
1845 if (migrate_postcopy_ram()) {
1847 trace_migration_completion_postcopy_end_before_rp();
1848 rp_error
= await_return_path_close_on_source(s
);
1849 trace_migration_completion_postcopy_end_after_rp(rp_error
);
1851 goto fail_invalidate
;
1855 if (qemu_file_get_error(s
->to_dst_file
)) {
1856 trace_migration_completion_file_err();
1857 goto fail_invalidate
;
1860 if (!migrate_colo_enabled()) {
1861 migrate_set_state(&s
->state
, current_active_state
,
1862 MIGRATION_STATUS_COMPLETED
);
1868 /* If not doing postcopy, vm_start() will be called: let's regain
1869 * control on images.
1871 if (s
->state
== MIGRATION_STATUS_ACTIVE
) {
1872 Error
*local_err
= NULL
;
1874 qemu_mutex_lock_iothread();
1875 bdrv_invalidate_cache_all(&local_err
);
1877 error_report_err(local_err
);
1879 s
->block_inactive
= false;
1881 qemu_mutex_unlock_iothread();
1885 migrate_set_state(&s
->state
, current_active_state
,
1886 MIGRATION_STATUS_FAILED
);
1889 bool migrate_colo_enabled(void)
1891 MigrationState
*s
= migrate_get_current();
1892 return s
->enabled_capabilities
[MIGRATION_CAPABILITY_X_COLO
];
1896 * Master migration thread on the source VM.
1897 * It drives the migration and pumps the data down the outgoing channel.
1899 static void *migration_thread(void *opaque
)
1901 MigrationState
*s
= opaque
;
1902 /* Used by the bandwidth calcs, updated later */
1903 int64_t initial_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1904 int64_t setup_start
= qemu_clock_get_ms(QEMU_CLOCK_HOST
);
1905 int64_t initial_bytes
= 0;
1906 int64_t max_size
= 0;
1907 int64_t start_time
= initial_time
;
1909 bool old_vm_running
= false;
1910 bool entered_postcopy
= false;
1911 /* The active state we expect to be in; ACTIVE or POSTCOPY_ACTIVE */
1912 enum MigrationStatus current_active_state
= MIGRATION_STATUS_ACTIVE
;
1913 bool enable_colo
= migrate_colo_enabled();
1915 rcu_register_thread();
1917 qemu_savevm_state_header(s
->to_dst_file
);
1919 if (migrate_postcopy_ram()) {
1920 /* Now tell the dest that it should open its end so it can reply */
1921 qemu_savevm_send_open_return_path(s
->to_dst_file
);
1923 /* And do a ping that will make stuff easier to debug */
1924 qemu_savevm_send_ping(s
->to_dst_file
, 1);
1927 * Tell the destination that we *might* want to do postcopy later;
1928 * if the other end can't do postcopy it should fail now, nice and
1931 qemu_savevm_send_postcopy_advise(s
->to_dst_file
);
1934 qemu_savevm_state_begin(s
->to_dst_file
, &s
->params
);
1936 s
->setup_time
= qemu_clock_get_ms(QEMU_CLOCK_HOST
) - setup_start
;
1937 current_active_state
= MIGRATION_STATUS_ACTIVE
;
1938 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
1939 MIGRATION_STATUS_ACTIVE
);
1941 trace_migration_thread_setup_complete();
1943 while (s
->state
== MIGRATION_STATUS_ACTIVE
||
1944 s
->state
== MIGRATION_STATUS_POSTCOPY_ACTIVE
) {
1945 int64_t current_time
;
1946 uint64_t pending_size
;
1948 if (!qemu_file_rate_limit(s
->to_dst_file
)) {
1949 uint64_t pend_post
, pend_nonpost
;
1951 qemu_savevm_state_pending(s
->to_dst_file
, max_size
, &pend_nonpost
,
1953 pending_size
= pend_nonpost
+ pend_post
;
1954 trace_migrate_pending(pending_size
, max_size
,
1955 pend_post
, pend_nonpost
);
1956 if (pending_size
&& pending_size
>= max_size
) {
1957 /* Still a significant amount to transfer */
1959 if (migrate_postcopy_ram() &&
1960 s
->state
!= MIGRATION_STATUS_POSTCOPY_ACTIVE
&&
1961 pend_nonpost
<= max_size
&&
1962 atomic_read(&s
->start_postcopy
)) {
1964 if (!postcopy_start(s
, &old_vm_running
)) {
1965 current_active_state
= MIGRATION_STATUS_POSTCOPY_ACTIVE
;
1966 entered_postcopy
= true;
1971 /* Just another iteration step */
1972 qemu_savevm_state_iterate(s
->to_dst_file
, entered_postcopy
);
1974 trace_migration_thread_low_pending(pending_size
);
1975 migration_completion(s
, current_active_state
,
1976 &old_vm_running
, &start_time
);
1981 if (qemu_file_get_error(s
->to_dst_file
)) {
1982 migrate_set_state(&s
->state
, current_active_state
,
1983 MIGRATION_STATUS_FAILED
);
1984 trace_migration_thread_file_err();
1987 current_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
1988 if (current_time
>= initial_time
+ BUFFER_DELAY
) {
1989 uint64_t transferred_bytes
= qemu_ftell(s
->to_dst_file
) -
1991 uint64_t time_spent
= current_time
- initial_time
;
1992 double bandwidth
= (double)transferred_bytes
/ time_spent
;
1993 max_size
= bandwidth
* s
->parameters
.downtime_limit
;
1995 s
->mbps
= (((double) transferred_bytes
* 8.0) /
1996 ((double) time_spent
/ 1000.0)) / 1000.0 / 1000.0;
1998 trace_migrate_transferred(transferred_bytes
, time_spent
,
1999 bandwidth
, max_size
);
2000 /* if we haven't sent anything, we don't want to recalculate
2001 10000 is a small enough number for our purposes */
2002 if (s
->dirty_bytes_rate
&& transferred_bytes
> 10000) {
2003 s
->expected_downtime
= s
->dirty_bytes_rate
/ bandwidth
;
2006 qemu_file_reset_rate_limit(s
->to_dst_file
);
2007 initial_time
= current_time
;
2008 initial_bytes
= qemu_ftell(s
->to_dst_file
);
2010 if (qemu_file_rate_limit(s
->to_dst_file
)) {
2011 /* usleep expects microseconds */
2012 g_usleep((initial_time
+ BUFFER_DELAY
- current_time
)*1000);
2016 trace_migration_thread_after_loop();
2017 /* If we enabled cpu throttling for auto-converge, turn it off. */
2018 cpu_throttle_stop();
2019 end_time
= qemu_clock_get_ms(QEMU_CLOCK_REALTIME
);
2021 qemu_mutex_lock_iothread();
2023 * The resource has been allocated by migration will be reused in COLO
2024 * process, so don't release them.
2027 qemu_savevm_state_cleanup();
2029 if (s
->state
== MIGRATION_STATUS_COMPLETED
) {
2030 uint64_t transferred_bytes
= qemu_ftell(s
->to_dst_file
);
2031 s
->total_time
= end_time
- s
->total_time
;
2032 if (!entered_postcopy
) {
2033 s
->downtime
= end_time
- start_time
;
2035 if (s
->total_time
) {
2036 s
->mbps
= (((double) transferred_bytes
* 8.0) /
2037 ((double) s
->total_time
)) / 1000;
2039 runstate_set(RUN_STATE_POSTMIGRATE
);
2041 if (s
->state
== MIGRATION_STATUS_ACTIVE
&& enable_colo
) {
2042 migrate_start_colo_process(s
);
2043 qemu_savevm_state_cleanup();
2045 * Fixme: we will run VM in COLO no matter its old running state.
2046 * After exited COLO, we will keep running.
2048 old_vm_running
= true;
2050 if (old_vm_running
&& !entered_postcopy
) {
2053 if (runstate_check(RUN_STATE_FINISH_MIGRATE
)) {
2054 runstate_set(RUN_STATE_POSTMIGRATE
);
2058 qemu_bh_schedule(s
->cleanup_bh
);
2059 qemu_mutex_unlock_iothread();
2061 rcu_unregister_thread();
2065 void migrate_fd_connect(MigrationState
*s
)
2067 s
->expected_downtime
= s
->parameters
.downtime_limit
;
2068 s
->cleanup_bh
= qemu_bh_new(migrate_fd_cleanup
, s
);
2070 qemu_file_set_blocking(s
->to_dst_file
, true);
2071 qemu_file_set_rate_limit(s
->to_dst_file
,
2072 s
->parameters
.max_bandwidth
/ XFER_LIMIT_RATIO
);
2074 /* Notify before starting migration thread */
2075 notifier_list_notify(&migration_state_notifiers
, s
);
2078 * Open the return path; currently for postcopy but other things might
2081 if (migrate_postcopy_ram()) {
2082 if (open_return_path_on_source(s
)) {
2083 error_report("Unable to open return-path for postcopy");
2084 migrate_set_state(&s
->state
, MIGRATION_STATUS_SETUP
,
2085 MIGRATION_STATUS_FAILED
);
2086 migrate_fd_cleanup(s
);
2091 migrate_compress_threads_create();
2092 qemu_thread_create(&s
->thread
, "live_migration", migration_thread
, s
,
2093 QEMU_THREAD_JOINABLE
);
2094 s
->migration_thread_running
= true;
2097 PostcopyState
postcopy_state_get(void)
2099 return atomic_mb_read(&incoming_postcopy_state
);
2102 /* Set the state and return the old state */
2103 PostcopyState
postcopy_state_set(PostcopyState new_state
)
2105 return atomic_xchg(&incoming_postcopy_state
, new_state
);