hw/arm/realview.c

   1 /*
   2  * ARM RealView Baseboard System emulation.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "qemu/osdep.h"
  11 #include "qapi/error.h"
  12 #include "cpu.h"
  13 #include "hw/sysbus.h"
  14 #include "hw/arm/boot.h"
  15 #include "hw/arm/primecell.h"
  16 #include "hw/net/lan9118.h"
  17 #include "hw/net/smc91c111.h"
  18 #include "hw/pci/pci.h"
  19 #include "net/net.h"
  20 #include "sysemu/sysemu.h"
  21 #include "hw/boards.h"
  22 #include "hw/i2c/i2c.h"
  23 #include "exec/address-spaces.h"
  24 #include "qemu/error-report.h"
  25 #include "hw/char/pl011.h"
  26 #include "hw/cpu/a9mpcore.h"
  27 #include "hw/intc/realview_gic.h"
  28 #include "hw/irq.h"
  29
  30 #define SMP_BOOT_ADDR 0xe0000000
  31 #define SMP_BOOTREG_ADDR 0x10000030
  32
  33 /* Board init.  */
  34
  35 static struct arm_boot_info realview_binfo = {
  36     .smp_loader_start = SMP_BOOT_ADDR,
  37     .smp_bootreg_addr = SMP_BOOTREG_ADDR,
  38 };
  39
  40 /* The following two lists must be consistent.  */
  41 enum realview_board_type {
  42     BOARD_EB,
  43     BOARD_EB_MPCORE,
  44     BOARD_PB_A8,
  45     BOARD_PBX_A9,
  46 };
  47
  48 static const int realview_board_id[] = {
  49     0x33b,
  50     0x33b,
  51     0x769,
  52     0x76d
  53 };
  54
  55 static void realview_init(MachineState *machine,
  56                           enum realview_board_type board_type)
  57 {
  58     ARMCPU *cpu = NULL;
  59     CPUARMState *env;
  60     MemoryRegion *sysmem = get_system_memory();
  61     MemoryRegion *ram_lo;
  62     MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
  63     MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
  64     MemoryRegion *ram_hack = g_new(MemoryRegion, 1);
  65     DeviceState *dev, *sysctl, *gpio2, *pl041;
  66     SysBusDevice *busdev;
  67     qemu_irq pic[64];
  68     qemu_irq mmc_irq[2];
  69     PCIBus *pci_bus = NULL;
  70     NICInfo *nd;
  71     I2CBus *i2c;
  72     int n;
  73     unsigned int smp_cpus = machine->smp.cpus;
  74     int done_nic = 0;
  75     qemu_irq cpu_irq[4];
  76     int is_mpcore = 0;
  77     int is_pb = 0;
  78     uint32_t proc_id = 0;
  79     uint32_t sys_id;
  80     ram_addr_t low_ram_size;
  81     ram_addr_t ram_size = machine->ram_size;
  82     hwaddr periphbase = 0;
  83
  84     switch (board_type) {
  85     case BOARD_EB:
  86         break;
  87     case BOARD_EB_MPCORE:
  88         is_mpcore = 1;
  89         periphbase = 0x10100000;
  90         break;
  91     case BOARD_PB_A8:
  92         is_pb = 1;
  93         break;
  94     case BOARD_PBX_A9:
  95         is_mpcore = 1;
  96         is_pb = 1;
  97         periphbase = 0x1f000000;
  98         break;
  99     }
 100
 101     for (n = 0; n < smp_cpus; n++) {
 102         Object *cpuobj = object_new(machine->cpu_type);
 103
 104         /* By default A9,A15 and ARM1176 CPUs have EL3 enabled.  This board
 105          * does not currently support EL3 so the CPU EL3 property is disabled
 106          * before realization.
 107          */
 108         if (object_property_find(cpuobj, "has_el3", NULL)) {
 109             object_property_set_bool(cpuobj, false, "has_el3", &error_fatal);
 110         }
 111
 112         if (is_pb && is_mpcore) {
 113             object_property_set_int(cpuobj, periphbase, "reset-cbar",
 114                                     &error_fatal);
 115         }
 116
 117         object_property_set_bool(cpuobj, true, "realized", &error_fatal);
 118
 119         cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpuobj), ARM_CPU_IRQ);
 120     }
 121     cpu = ARM_CPU(first_cpu);
 122     env = &cpu->env;
 123     if (arm_feature(env, ARM_FEATURE_V7)) {
 124         if (is_mpcore) {
 125             proc_id = 0x0c000000;
 126         } else {
 127             proc_id = 0x0e000000;
 128         }
 129     } else if (arm_feature(env, ARM_FEATURE_V6K)) {
 130         proc_id = 0x06000000;
 131     } else if (arm_feature(env, ARM_FEATURE_V6)) {
 132         proc_id = 0x04000000;
 133     } else {
 134         proc_id = 0x02000000;
 135     }
 136
 137     if (is_pb && ram_size > 0x20000000) {
 138         /* Core tile RAM.  */
 139         ram_lo = g_new(MemoryRegion, 1);
 140         low_ram_size = ram_size - 0x20000000;
 141         ram_size = 0x20000000;
 142         memory_region_init_ram(ram_lo, NULL, "realview.lowmem", low_ram_size,
 143                                &error_fatal);
 144         memory_region_add_subregion(sysmem, 0x20000000, ram_lo);
 145     }
 146
 147     memory_region_init_ram(ram_hi, NULL, "realview.highmem", ram_size,
 148                            &error_fatal);
 149     low_ram_size = ram_size;
 150     if (low_ram_size > 0x10000000)
 151       low_ram_size = 0x10000000;
 152     /* SDRAM at address zero.  */
 153     memory_region_init_alias(ram_alias, NULL, "realview.alias",
 154                              ram_hi, 0, low_ram_size);
 155     memory_region_add_subregion(sysmem, 0, ram_alias);
 156     if (is_pb) {
 157         /* And again at a high address.  */
 158         memory_region_add_subregion(sysmem, 0x70000000, ram_hi);
 159     } else {
 160         ram_size = low_ram_size;
 161     }
 162
 163     sys_id = is_pb ? 0x01780500 : 0xc1400400;
 164     sysctl = qdev_create(NULL, "realview_sysctl");
 165     qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
 166     qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
 167     qdev_init_nofail(sysctl);
 168     sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, 0x10000000);
 169
 170     if (is_mpcore) {
 171         dev = qdev_create(NULL, is_pb ? TYPE_A9MPCORE_PRIV : "realview_mpcore");
 172         qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
 173         qdev_init_nofail(dev);
 174         busdev = SYS_BUS_DEVICE(dev);
 175         sysbus_mmio_map(busdev, 0, periphbase);
 176         for (n = 0; n < smp_cpus; n++) {
 177             sysbus_connect_irq(busdev, n, cpu_irq[n]);
 178         }
 179         sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
 180         /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
 181         realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
 182     } else {
 183         uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
 184         /* For now just create the nIRQ GIC, and ignore the others.  */
 185         dev = sysbus_create_simple(TYPE_REALVIEW_GIC, gic_addr, cpu_irq[0]);
 186     }
 187     for (n = 0; n < 64; n++) {
 188         pic[n] = qdev_get_gpio_in(dev, n);
 189     }
 190
 191     pl041 = qdev_create(NULL, "pl041");
 192     qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
 193     qdev_init_nofail(pl041);
 194     sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, 0x10004000);
 195     sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[19]);
 196
 197     sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
 198     sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
 199
 200     pl011_create(0x10009000, pic[12], serial_hd(0));
 201     pl011_create(0x1000a000, pic[13], serial_hd(1));
 202     pl011_create(0x1000b000, pic[14], serial_hd(2));
 203     pl011_create(0x1000c000, pic[15], serial_hd(3));
 204
 205     /* DMA controller is optional, apparently.  */
 206     dev = qdev_create(NULL, "pl081");
 207     object_property_set_link(OBJECT(dev), OBJECT(sysmem), "downstream",
 208                              &error_fatal);
 209     qdev_init_nofail(dev);
 210     busdev = SYS_BUS_DEVICE(dev);
 211     sysbus_mmio_map(busdev, 0, 0x10030000);
 212     sysbus_connect_irq(busdev, 0, pic[24]);
 213
 214     sysbus_create_simple("sp804", 0x10011000, pic[4]);
 215     sysbus_create_simple("sp804", 0x10012000, pic[5]);
 216
 217     sysbus_create_simple("pl061", 0x10013000, pic[6]);
 218     sysbus_create_simple("pl061", 0x10014000, pic[7]);
 219     gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
 220
 221     sysbus_create_simple("pl111", 0x10020000, pic[23]);
 222
 223     dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
 224     /* Wire up MMC card detect and read-only signals. These have
 225      * to go to both the PL061 GPIO and the sysctl register.
 226      * Note that the PL181 orders these lines (readonly,inserted)
 227      * and the PL061 has them the other way about. Also the card
 228      * detect line is inverted.
 229      */
 230     mmc_irq[0] = qemu_irq_split(
 231         qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
 232         qdev_get_gpio_in(gpio2, 1));
 233     mmc_irq[1] = qemu_irq_split(
 234         qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
 235         qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
 236     qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
 237     qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
 238
 239     sysbus_create_simple("pl031", 0x10017000, pic[10]);
 240
 241     if (!is_pb) {
 242         dev = qdev_create(NULL, "realview_pci");
 243         busdev = SYS_BUS_DEVICE(dev);
 244         qdev_init_nofail(dev);
 245         sysbus_mmio_map(busdev, 0, 0x10019000); /* PCI controller registers */
 246         sysbus_mmio_map(busdev, 1, 0x60000000); /* PCI self-config */
 247         sysbus_mmio_map(busdev, 2, 0x61000000); /* PCI config */
 248         sysbus_mmio_map(busdev, 3, 0x62000000); /* PCI I/O */
 249         sysbus_mmio_map(busdev, 4, 0x63000000); /* PCI memory window 1 */
 250         sysbus_mmio_map(busdev, 5, 0x64000000); /* PCI memory window 2 */
 251         sysbus_mmio_map(busdev, 6, 0x68000000); /* PCI memory window 3 */
 252         sysbus_connect_irq(busdev, 0, pic[48]);
 253         sysbus_connect_irq(busdev, 1, pic[49]);
 254         sysbus_connect_irq(busdev, 2, pic[50]);
 255         sysbus_connect_irq(busdev, 3, pic[51]);
 256         pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
 257         if (machine_usb(machine)) {
 258             pci_create_simple(pci_bus, -1, "pci-ohci");
 259         }
 260         n = drive_get_max_bus(IF_SCSI);
 261         while (n >= 0) {
 262             dev = DEVICE(pci_create_simple(pci_bus, -1, "lsi53c895a"));
 263             lsi53c8xx_handle_legacy_cmdline(dev);
 264             n--;
 265         }
 266     }
 267     for(n = 0; n < nb_nics; n++) {
 268         nd = &nd_table[n];
 269
 270         if (!done_nic && (!nd->model ||
 271                     strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
 272             if (is_pb) {
 273                 lan9118_init(nd, 0x4e000000, pic[28]);
 274             } else {
 275                 smc91c111_init(nd, 0x4e000000, pic[28]);
 276             }
 277             done_nic = 1;
 278         } else {
 279             if (pci_bus) {
 280                 pci_nic_init_nofail(nd, pci_bus, "rtl8139", NULL);
 281             }
 282         }
 283     }
 284
 285     dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
 286     i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
 287     i2c_create_slave(i2c, "ds1338", 0x68);
 288
 289     /* Memory map for RealView Emulation Baseboard:  */
 290     /* 0x10000000 System registers.  */
 291     /*  0x10001000 System controller.  */
 292     /* 0x10002000 Two-Wire Serial Bus.  */
 293     /* 0x10003000 Reserved.  */
 294     /*  0x10004000 AACI.  */
 295     /*  0x10005000 MCI.  */
 296     /* 0x10006000 KMI0.  */
 297     /* 0x10007000 KMI1.  */
 298     /*  0x10008000 Character LCD. (EB) */
 299     /* 0x10009000 UART0.  */
 300     /* 0x1000a000 UART1.  */
 301     /* 0x1000b000 UART2.  */
 302     /* 0x1000c000 UART3.  */
 303     /*  0x1000d000 SSPI.  */
 304     /*  0x1000e000 SCI.  */
 305     /* 0x1000f000 Reserved.  */
 306     /*  0x10010000 Watchdog.  */
 307     /* 0x10011000 Timer 0+1.  */
 308     /* 0x10012000 Timer 2+3.  */
 309     /*  0x10013000 GPIO 0.  */
 310     /*  0x10014000 GPIO 1.  */
 311     /*  0x10015000 GPIO 2.  */
 312     /*  0x10002000 Two-Wire Serial Bus - DVI. (PB) */
 313     /* 0x10017000 RTC.  */
 314     /*  0x10018000 DMC.  */
 315     /*  0x10019000 PCI controller config.  */
 316     /*  0x10020000 CLCD.  */
 317     /* 0x10030000 DMA Controller.  */
 318     /* 0x10040000 GIC1. (EB) */
 319     /*  0x10050000 GIC2. (EB) */
 320     /*  0x10060000 GIC3. (EB) */
 321     /*  0x10070000 GIC4. (EB) */
 322     /*  0x10080000 SMC.  */
 323     /* 0x1e000000 GIC1. (PB) */
 324     /*  0x1e001000 GIC2. (PB) */
 325     /*  0x1e002000 GIC3. (PB) */
 326     /*  0x1e003000 GIC4. (PB) */
 327     /*  0x40000000 NOR flash.  */
 328     /*  0x44000000 DoC flash.  */
 329     /*  0x48000000 SRAM.  */
 330     /*  0x4c000000 Configuration flash.  */
 331     /* 0x4e000000 Ethernet.  */
 332     /*  0x4f000000 USB.  */
 333     /*  0x50000000 PISMO.  */
 334     /*  0x54000000 PISMO.  */
 335     /*  0x58000000 PISMO.  */
 336     /*  0x5c000000 PISMO.  */
 337     /* 0x60000000 PCI.  */
 338     /* 0x60000000 PCI Self Config.  */
 339     /* 0x61000000 PCI Config.  */
 340     /* 0x62000000 PCI IO.  */
 341     /* 0x63000000 PCI mem 0.  */
 342     /* 0x64000000 PCI mem 1.  */
 343     /* 0x68000000 PCI mem 2.  */
 344
 345     /* ??? Hack to map an additional page of ram for the secondary CPU
 346        startup code.  I guess this works on real hardware because the
 347        BootROM happens to be in ROM/flash or in memory that isn't clobbered
 348        until after Linux boots the secondary CPUs.  */
 349     memory_region_init_ram(ram_hack, NULL, "realview.hack", 0x1000,
 350                            &error_fatal);
 351     memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);
 352
 353     realview_binfo.ram_size = ram_size;
 354     realview_binfo.nb_cpus = smp_cpus;
 355     realview_binfo.board_id = realview_board_id[board_type];
 356     realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
 357     arm_load_kernel(ARM_CPU(first_cpu), machine, &realview_binfo);
 358 }
 359
 360 static void realview_eb_init(MachineState *machine)
 361 {
 362     realview_init(machine, BOARD_EB);
 363 }
 364
 365 static void realview_eb_mpcore_init(MachineState *machine)
 366 {
 367     realview_init(machine, BOARD_EB_MPCORE);
 368 }
 369
 370 static void realview_pb_a8_init(MachineState *machine)
 371 {
 372     realview_init(machine, BOARD_PB_A8);
 373 }
 374
 375 static void realview_pbx_a9_init(MachineState *machine)
 376 {
 377     realview_init(machine, BOARD_PBX_A9);
 378 }
 379
 380 static void realview_eb_class_init(ObjectClass *oc, void *data)
 381 {
 382     MachineClass *mc = MACHINE_CLASS(oc);
 383
 384     mc->desc = "ARM RealView Emulation Baseboard (ARM926EJ-S)";
 385     mc->init = realview_eb_init;
 386     mc->block_default_type = IF_SCSI;
 387     mc->ignore_memory_transaction_failures = true;
 388     mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm926");
 389 }
 390
 391 static const TypeInfo realview_eb_type = {
 392     .name = MACHINE_TYPE_NAME("realview-eb"),
 393     .parent = TYPE_MACHINE,
 394     .class_init = realview_eb_class_init,
 395 };
 396
 397 static void realview_eb_mpcore_class_init(ObjectClass *oc, void *data)
 398 {
 399     MachineClass *mc = MACHINE_CLASS(oc);
 400
 401     mc->desc = "ARM RealView Emulation Baseboard (ARM11MPCore)";
 402     mc->init = realview_eb_mpcore_init;
 403     mc->block_default_type = IF_SCSI;
 404     mc->max_cpus = 4;
 405     mc->ignore_memory_transaction_failures = true;
 406     mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm11mpcore");
 407 }
 408
 409 static const TypeInfo realview_eb_mpcore_type = {
 410     .name = MACHINE_TYPE_NAME("realview-eb-mpcore"),
 411     .parent = TYPE_MACHINE,
 412     .class_init = realview_eb_mpcore_class_init,
 413 };
 414
 415 static void realview_pb_a8_class_init(ObjectClass *oc, void *data)
 416 {
 417     MachineClass *mc = MACHINE_CLASS(oc);
 418
 419     mc->desc = "ARM RealView Platform Baseboard for Cortex-A8";
 420     mc->init = realview_pb_a8_init;
 421     mc->ignore_memory_transaction_failures = true;
 422     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a8");
 423 }
 424
 425 static const TypeInfo realview_pb_a8_type = {
 426     .name = MACHINE_TYPE_NAME("realview-pb-a8"),
 427     .parent = TYPE_MACHINE,
 428     .class_init = realview_pb_a8_class_init,
 429 };
 430
 431 static void realview_pbx_a9_class_init(ObjectClass *oc, void *data)
 432 {
 433     MachineClass *mc = MACHINE_CLASS(oc);
 434
 435     mc->desc = "ARM RealView Platform Baseboard Explore for Cortex-A9";
 436     mc->init = realview_pbx_a9_init;
 437     mc->max_cpus = 4;
 438     mc->ignore_memory_transaction_failures = true;
 439     mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
 440 }
 441
 442 static const TypeInfo realview_pbx_a9_type = {
 443     .name = MACHINE_TYPE_NAME("realview-pbx-a9"),
 444     .parent = TYPE_MACHINE,
 445     .class_init = realview_pbx_a9_class_init,
 446 };
 447
 448 static void realview_machine_init(void)
 449 {
 450     type_register_static(&realview_eb_type);
 451     type_register_static(&realview_eb_mpcore_type);
 452     type_register_static(&realview_pb_a8_type);
 453     type_register_static(&realview_pbx_a9_type);
 454 }
 455
 456 type_init(realview_machine_init)