4 #include "sysemu/dma.h"
6 #include "hw/ppc/xics.h"
7 #include "hw/ppc/spapr_drc.h"
8 #include "hw/mem/pc-dimm.h"
13 typedef struct sPAPRConfigureConnectorState sPAPRConfigureConnectorState
;
14 typedef struct sPAPREventLogEntry sPAPREventLogEntry
;
16 #define HPTE64_V_HPTE_DIRTY 0x0000000000000040ULL
17 #define SPAPR_ENTRY_POINT 0x100
19 #define SPAPR_TIMEBASE_FREQ 512000000ULL
21 typedef struct sPAPRMachineClass sPAPRMachineClass
;
22 typedef struct sPAPRMachineState sPAPRMachineState
;
24 #define TYPE_SPAPR_MACHINE "spapr-machine"
25 #define SPAPR_MACHINE(obj) \
26 OBJECT_CHECK(sPAPRMachineState, (obj), TYPE_SPAPR_MACHINE)
27 #define SPAPR_MACHINE_GET_CLASS(obj) \
28 OBJECT_GET_CLASS(sPAPRMachineClass, obj, TYPE_SPAPR_MACHINE)
29 #define SPAPR_MACHINE_CLASS(klass) \
30 OBJECT_CLASS_CHECK(sPAPRMachineClass, klass, TYPE_SPAPR_MACHINE)
35 struct sPAPRMachineClass
{
37 MachineClass parent_class
;
40 bool dr_lmb_enabled
; /* enable dynamic-reconfig/hotplug of LMBs */
41 bool use_ohci_by_default
; /* use USB-OHCI instead of XHCI */
47 struct sPAPRMachineState
{
49 MachineState parent_obj
;
51 struct VIOsPAPRBus
*vio_bus
;
52 QLIST_HEAD(, sPAPRPHBState
) phbs
;
53 struct sPAPRNVRAM
*nvram
;
61 hwaddr fdt_addr
, rtas_addr
;
65 uint64_t rtc_offset
; /* Now used only during incoming migration */
66 struct PPCTimebase tb
;
69 uint32_t check_exception_irq
;
70 Notifier epow_notifier
;
71 QTAILQ_HEAD(, sPAPREventLogEntry
) pending_events
;
79 QTAILQ_HEAD(, sPAPRConfigureConnectorState
) ccs_list
;
83 MemoryHotplugState hotplug_memory
;
88 #define H_BUSY 1 /* Hardware busy -- retry later */
89 #define H_CLOSED 2 /* Resource closed */
90 #define H_NOT_AVAILABLE 3
91 #define H_CONSTRAINED 4 /* Resource request constrained to max allowed */
93 #define H_IN_PROGRESS 14 /* Kind of like busy */
94 #define H_PAGE_REGISTERED 15
95 #define H_PARTIAL_STORE 16
96 #define H_PENDING 17 /* returned from H_POLL_PENDING */
97 #define H_CONTINUE 18 /* Returned from H_Join on success */
98 #define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */
99 #define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \
100 is a good time to retry */
101 #define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \
102 is a good time to retry */
103 #define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \
104 is a good time to retry */
105 #define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \
106 is a good time to retry */
107 #define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \
108 is a good time to retry */
109 #define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \
110 is a good time to retry */
111 #define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */
112 #define H_HARDWARE -1 /* Hardware error */
113 #define H_FUNCTION -2 /* Function not supported */
114 #define H_PRIVILEGE -3 /* Caller not privileged */
115 #define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */
116 #define H_BAD_MODE -5 /* Illegal msr value */
117 #define H_PTEG_FULL -6 /* PTEG is full */
118 #define H_NOT_FOUND -7 /* PTE was not found" */
119 #define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */
121 #define H_AUTHORITY -10
122 #define H_PERMISSION -11
123 #define H_DROPPED -12
124 #define H_SOURCE_PARM -13
125 #define H_DEST_PARM -14
126 #define H_REMOTE_PARM -15
127 #define H_RESOURCE -16
128 #define H_ADAPTER_PARM -17
129 #define H_RH_PARM -18
130 #define H_RCQ_PARM -19
131 #define H_SCQ_PARM -20
132 #define H_EQ_PARM -21
133 #define H_RT_PARM -22
134 #define H_ST_PARM -23
135 #define H_SIGT_PARM -24
136 #define H_TOKEN_PARM -25
137 #define H_MLENGTH_PARM -27
138 #define H_MEM_PARM -28
139 #define H_MEM_ACCESS_PARM -29
140 #define H_ATTR_PARM -30
141 #define H_PORT_PARM -31
142 #define H_MCG_PARM -32
143 #define H_VL_PARM -33
144 #define H_TSIZE_PARM -34
145 #define H_TRACE_PARM -35
147 #define H_MASK_PARM -37
148 #define H_MCG_FULL -38
149 #define H_ALIAS_EXIST -39
150 #define H_P_COUNTER -40
151 #define H_TABLE_FULL -41
152 #define H_ALT_TABLE -42
153 #define H_MR_CONDITION -43
154 #define H_NOT_ENOUGH_RESOURCES -44
155 #define H_R_STATE -45
156 #define H_RESCINDEND -46
165 #define H_UNSUPPORTED_FLAG -256
166 #define H_MULTI_THREADS_ACTIVE -9005
169 /* Long Busy is a condition that can be returned by the firmware
170 * when a call cannot be completed now, but the identical call
171 * should be retried later. This prevents calls blocking in the
172 * firmware for long periods of time. Annoyingly the firmware can return
173 * a range of return codes, hinting at how long we should wait before
174 * retrying. If you don't care for the hint, the macro below is a good
175 * way to check for the long_busy return codes
177 #define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \
178 && (x <= H_LONG_BUSY_END_RANGE))
181 #define H_LARGE_PAGE (1ULL<<(63-16))
182 #define H_EXACT (1ULL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */
183 #define H_R_XLATE (1ULL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */
184 #define H_READ_4 (1ULL<<(63-26)) /* Return 4 PTEs */
185 #define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
186 #define H_PAGE_UNUSED ((1ULL<<(63-29)) | (1ULL<<(63-30)))
187 #define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
188 #define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
189 #define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
190 #define H_AVPN (1ULL<<(63-32)) /* An avpn is provided as a sanity test */
191 #define H_ANDCOND (1ULL<<(63-33))
192 #define H_ICACHE_INVALIDATE (1ULL<<(63-40)) /* icbi, etc. (ignored for IO pages) */
193 #define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */
194 #define H_ZERO_PAGE (1ULL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */
195 #define H_COPY_PAGE (1ULL<<(63-49))
196 #define H_N (1ULL<<(63-61))
197 #define H_PP1 (1ULL<<(63-62))
198 #define H_PP2 (1ULL<<(63-63))
200 /* Values for 2nd argument to H_SET_MODE */
201 #define H_SET_MODE_RESOURCE_SET_CIABR 1
202 #define H_SET_MODE_RESOURCE_SET_DAWR 2
203 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
204 #define H_SET_MODE_RESOURCE_LE 4
206 /* Flags for H_SET_MODE_RESOURCE_LE */
207 #define H_SET_MODE_ENDIAN_BIG 0
208 #define H_SET_MODE_ENDIAN_LITTLE 1
211 #define H_VASI_INVALID 0
212 #define H_VASI_ENABLED 1
213 #define H_VASI_ABORTED 2
214 #define H_VASI_SUSPENDING 3
215 #define H_VASI_SUSPENDED 4
216 #define H_VASI_RESUMED 5
217 #define H_VASI_COMPLETED 6
220 #define H_DABRX_HYPERVISOR (1ULL<<(63-61))
221 #define H_DABRX_KERNEL (1ULL<<(63-62))
222 #define H_DABRX_USER (1ULL<<(63-63))
224 /* Each control block has to be on a 4K boundary */
225 #define H_CB_ALIGNMENT 4096
227 /* pSeries hypervisor opcodes */
228 #define H_REMOVE 0x04
231 #define H_CLEAR_MOD 0x10
232 #define H_CLEAR_REF 0x14
233 #define H_PROTECT 0x18
234 #define H_GET_TCE 0x1c
235 #define H_PUT_TCE 0x20
236 #define H_SET_SPRG0 0x24
237 #define H_SET_DABR 0x28
238 #define H_PAGE_INIT 0x2c
239 #define H_SET_ASR 0x30
240 #define H_ASR_ON 0x34
241 #define H_ASR_OFF 0x38
242 #define H_LOGICAL_CI_LOAD 0x3c
243 #define H_LOGICAL_CI_STORE 0x40
244 #define H_LOGICAL_CACHE_LOAD 0x44
245 #define H_LOGICAL_CACHE_STORE 0x48
246 #define H_LOGICAL_ICBI 0x4c
247 #define H_LOGICAL_DCBF 0x50
248 #define H_GET_TERM_CHAR 0x54
249 #define H_PUT_TERM_CHAR 0x58
250 #define H_REAL_TO_LOGICAL 0x5c
251 #define H_HYPERVISOR_DATA 0x60
257 #define H_PERFMON 0x7c
258 #define H_MIGRATE_DMA 0x78
259 #define H_REGISTER_VPA 0xDC
261 #define H_CONFER 0xE4
263 #define H_GET_PPP 0xEC
264 #define H_SET_PPP 0xF0
267 #define H_REG_CRQ 0xFC
268 #define H_FREE_CRQ 0x100
269 #define H_VIO_SIGNAL 0x104
270 #define H_SEND_CRQ 0x108
271 #define H_COPY_RDMA 0x110
272 #define H_REGISTER_LOGICAL_LAN 0x114
273 #define H_FREE_LOGICAL_LAN 0x118
274 #define H_ADD_LOGICAL_LAN_BUFFER 0x11C
275 #define H_SEND_LOGICAL_LAN 0x120
276 #define H_BULK_REMOVE 0x124
277 #define H_MULTICAST_CTRL 0x130
278 #define H_SET_XDABR 0x134
279 #define H_STUFF_TCE 0x138
280 #define H_PUT_TCE_INDIRECT 0x13C
281 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C
282 #define H_VTERM_PARTNER_INFO 0x150
283 #define H_REGISTER_VTERM 0x154
284 #define H_FREE_VTERM 0x158
285 #define H_RESET_EVENTS 0x15C
286 #define H_ALLOC_RESOURCE 0x160
287 #define H_FREE_RESOURCE 0x164
288 #define H_MODIFY_QP 0x168
289 #define H_QUERY_QP 0x16C
290 #define H_REREGISTER_PMR 0x170
291 #define H_REGISTER_SMR 0x174
292 #define H_QUERY_MR 0x178
293 #define H_QUERY_MW 0x17C
294 #define H_QUERY_HCA 0x180
295 #define H_QUERY_PORT 0x184
296 #define H_MODIFY_PORT 0x188
297 #define H_DEFINE_AQP1 0x18C
298 #define H_GET_TRACE_BUFFER 0x190
299 #define H_DEFINE_AQP0 0x194
300 #define H_RESIZE_MR 0x198
301 #define H_ATTACH_MCQP 0x19C
302 #define H_DETACH_MCQP 0x1A0
303 #define H_CREATE_RPT 0x1A4
304 #define H_REMOVE_RPT 0x1A8
305 #define H_REGISTER_RPAGES 0x1AC
306 #define H_DISABLE_AND_GETC 0x1B0
307 #define H_ERROR_DATA 0x1B4
308 #define H_GET_HCA_INFO 0x1B8
309 #define H_GET_PERF_COUNT 0x1BC
310 #define H_MANAGE_TRACE 0x1C0
311 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
312 #define H_QUERY_INT_STATE 0x1E4
313 #define H_POLL_PENDING 0x1D8
314 #define H_ILLAN_ATTRIBUTES 0x244
315 #define H_MODIFY_HEA_QP 0x250
316 #define H_QUERY_HEA_QP 0x254
317 #define H_QUERY_HEA 0x258
318 #define H_QUERY_HEA_PORT 0x25C
319 #define H_MODIFY_HEA_PORT 0x260
320 #define H_REG_BCMC 0x264
321 #define H_DEREG_BCMC 0x268
322 #define H_REGISTER_HEA_RPAGES 0x26C
323 #define H_DISABLE_AND_GET_HEA 0x270
324 #define H_GET_HEA_INFO 0x274
325 #define H_ALLOC_HEA_RESOURCE 0x278
326 #define H_ADD_CONN 0x284
327 #define H_DEL_CONN 0x288
329 #define H_VASI_STATE 0x2A4
330 #define H_ENABLE_CRQ 0x2B0
331 #define H_GET_EM_PARMS 0x2B8
332 #define H_SET_MPP 0x2D0
333 #define H_GET_MPP 0x2D4
334 #define H_XIRR_X 0x2FC
335 #define H_RANDOM 0x300
336 #define H_SET_MODE 0x31C
337 #define MAX_HCALL_OPCODE H_SET_MODE
339 /* The hcalls above are standardized in PAPR and implemented by pHyp
342 * We also need some hcalls which are specific to qemu / KVM-on-POWER.
343 * So far we just need one for H_RTAS, but in future we'll need more
344 * for extensions like virtio. We put those into the 0xf000-0xfffc
345 * range which is reserved by PAPR for "platform-specific" hcalls.
347 #define KVMPPC_HCALL_BASE 0xf000
348 #define KVMPPC_H_RTAS (KVMPPC_HCALL_BASE + 0x0)
349 #define KVMPPC_H_LOGICAL_MEMOP (KVMPPC_HCALL_BASE + 0x1)
350 /* Client Architecture support */
351 #define KVMPPC_H_CAS (KVMPPC_HCALL_BASE + 0x2)
352 #define KVMPPC_HCALL_MAX KVMPPC_H_CAS
354 typedef struct sPAPRDeviceTreeUpdateHeader
{
356 } sPAPRDeviceTreeUpdateHeader
;
358 #define hcall_dprintf(fmt, ...) \
360 qemu_log_mask(LOG_GUEST_ERROR, "%s: " fmt, __func__, ## __VA_ARGS__); \
363 typedef target_ulong (*spapr_hcall_fn
)(PowerPCCPU
*cpu
, sPAPRMachineState
*sm
,
367 void spapr_register_hypercall(target_ulong opcode
, spapr_hcall_fn fn
);
368 target_ulong
spapr_hypercall(PowerPCCPU
*cpu
, target_ulong opcode
,
371 int spapr_allocate_irq(int hint
, bool lsi
);
372 int spapr_allocate_irq_block(int num
, bool lsi
, bool msi
);
374 /* ibm,set-eeh-option */
375 #define RTAS_EEH_DISABLE 0
376 #define RTAS_EEH_ENABLE 1
377 #define RTAS_EEH_THAW_IO 2
378 #define RTAS_EEH_THAW_DMA 3
380 /* ibm,get-config-addr-info2 */
381 #define RTAS_GET_PE_ADDR 0
382 #define RTAS_GET_PE_MODE 1
383 #define RTAS_PE_MODE_NONE 0
384 #define RTAS_PE_MODE_NOT_SHARED 1
385 #define RTAS_PE_MODE_SHARED 2
387 /* ibm,read-slot-reset-state2 */
388 #define RTAS_EEH_PE_STATE_NORMAL 0
389 #define RTAS_EEH_PE_STATE_RESET 1
390 #define RTAS_EEH_PE_STATE_STOPPED_IO_DMA 2
391 #define RTAS_EEH_PE_STATE_STOPPED_DMA 4
392 #define RTAS_EEH_PE_STATE_UNAVAIL 5
393 #define RTAS_EEH_NOT_SUPPORT 0
394 #define RTAS_EEH_SUPPORT 1
395 #define RTAS_EEH_PE_UNAVAIL_INFO 1000
396 #define RTAS_EEH_PE_RECOVER_INFO 0
398 /* ibm,set-slot-reset */
399 #define RTAS_SLOT_RESET_DEACTIVATE 0
400 #define RTAS_SLOT_RESET_HOT 1
401 #define RTAS_SLOT_RESET_FUNDAMENTAL 3
403 /* ibm,slot-error-detail */
404 #define RTAS_SLOT_TEMP_ERR_LOG 1
405 #define RTAS_SLOT_PERM_ERR_LOG 2
407 /* RTAS return codes */
408 #define RTAS_OUT_SUCCESS 0
409 #define RTAS_OUT_NO_ERRORS_FOUND 1
410 #define RTAS_OUT_HW_ERROR -1
411 #define RTAS_OUT_BUSY -2
412 #define RTAS_OUT_PARAM_ERROR -3
413 #define RTAS_OUT_NOT_SUPPORTED -3
414 #define RTAS_OUT_NO_SUCH_INDICATOR -3
415 #define RTAS_OUT_NOT_AUTHORIZED -9002
416 #define RTAS_OUT_SYSPARM_PARAM_ERROR -9999
418 /* DDW pagesize mask values from ibm,query-pe-dma-window */
419 #define RTAS_DDW_PGSIZE_4K 0x01
420 #define RTAS_DDW_PGSIZE_64K 0x02
421 #define RTAS_DDW_PGSIZE_16M 0x04
422 #define RTAS_DDW_PGSIZE_32M 0x08
423 #define RTAS_DDW_PGSIZE_64M 0x10
424 #define RTAS_DDW_PGSIZE_128M 0x20
425 #define RTAS_DDW_PGSIZE_256M 0x40
426 #define RTAS_DDW_PGSIZE_16G 0x80
429 #define RTAS_TOKEN_BASE 0x2000
431 #define RTAS_DISPLAY_CHARACTER (RTAS_TOKEN_BASE + 0x00)
432 #define RTAS_GET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x01)
433 #define RTAS_SET_TIME_OF_DAY (RTAS_TOKEN_BASE + 0x02)
434 #define RTAS_POWER_OFF (RTAS_TOKEN_BASE + 0x03)
435 #define RTAS_SYSTEM_REBOOT (RTAS_TOKEN_BASE + 0x04)
436 #define RTAS_QUERY_CPU_STOPPED_STATE (RTAS_TOKEN_BASE + 0x05)
437 #define RTAS_START_CPU (RTAS_TOKEN_BASE + 0x06)
438 #define RTAS_STOP_SELF (RTAS_TOKEN_BASE + 0x07)
439 #define RTAS_IBM_GET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x08)
440 #define RTAS_IBM_SET_SYSTEM_PARAMETER (RTAS_TOKEN_BASE + 0x09)
441 #define RTAS_IBM_SET_XIVE (RTAS_TOKEN_BASE + 0x0A)
442 #define RTAS_IBM_GET_XIVE (RTAS_TOKEN_BASE + 0x0B)
443 #define RTAS_IBM_INT_OFF (RTAS_TOKEN_BASE + 0x0C)
444 #define RTAS_IBM_INT_ON (RTAS_TOKEN_BASE + 0x0D)
445 #define RTAS_CHECK_EXCEPTION (RTAS_TOKEN_BASE + 0x0E)
446 #define RTAS_EVENT_SCAN (RTAS_TOKEN_BASE + 0x0F)
447 #define RTAS_IBM_SET_TCE_BYPASS (RTAS_TOKEN_BASE + 0x10)
448 #define RTAS_QUIESCE (RTAS_TOKEN_BASE + 0x11)
449 #define RTAS_NVRAM_FETCH (RTAS_TOKEN_BASE + 0x12)
450 #define RTAS_NVRAM_STORE (RTAS_TOKEN_BASE + 0x13)
451 #define RTAS_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x14)
452 #define RTAS_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x15)
453 #define RTAS_IBM_READ_PCI_CONFIG (RTAS_TOKEN_BASE + 0x16)
454 #define RTAS_IBM_WRITE_PCI_CONFIG (RTAS_TOKEN_BASE + 0x17)
455 #define RTAS_IBM_QUERY_INTERRUPT_SOURCE_NUMBER (RTAS_TOKEN_BASE + 0x18)
456 #define RTAS_IBM_CHANGE_MSI (RTAS_TOKEN_BASE + 0x19)
457 #define RTAS_SET_INDICATOR (RTAS_TOKEN_BASE + 0x1A)
458 #define RTAS_SET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1B)
459 #define RTAS_GET_POWER_LEVEL (RTAS_TOKEN_BASE + 0x1C)
460 #define RTAS_GET_SENSOR_STATE (RTAS_TOKEN_BASE + 0x1D)
461 #define RTAS_IBM_CONFIGURE_CONNECTOR (RTAS_TOKEN_BASE + 0x1E)
462 #define RTAS_IBM_OS_TERM (RTAS_TOKEN_BASE + 0x1F)
463 #define RTAS_IBM_SET_EEH_OPTION (RTAS_TOKEN_BASE + 0x20)
464 #define RTAS_IBM_GET_CONFIG_ADDR_INFO2 (RTAS_TOKEN_BASE + 0x21)
465 #define RTAS_IBM_READ_SLOT_RESET_STATE2 (RTAS_TOKEN_BASE + 0x22)
466 #define RTAS_IBM_SET_SLOT_RESET (RTAS_TOKEN_BASE + 0x23)
467 #define RTAS_IBM_CONFIGURE_PE (RTAS_TOKEN_BASE + 0x24)
468 #define RTAS_IBM_SLOT_ERROR_DETAIL (RTAS_TOKEN_BASE + 0x25)
469 #define RTAS_IBM_QUERY_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x26)
470 #define RTAS_IBM_CREATE_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x27)
471 #define RTAS_IBM_REMOVE_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x28)
472 #define RTAS_IBM_RESET_PE_DMA_WINDOW (RTAS_TOKEN_BASE + 0x29)
474 #define RTAS_TOKEN_MAX (RTAS_TOKEN_BASE + 0x2A)
476 /* RTAS ibm,get-system-parameter token values */
477 #define RTAS_SYSPARM_SPLPAR_CHARACTERISTICS 20
478 #define RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE 42
479 #define RTAS_SYSPARM_UUID 48
481 /* RTAS indicator/sensor types
483 * as defined by PAPR+ 2.7 7.3.5.4, Table 41
485 * NOTE: currently only DR-related sensors are implemented here
487 #define RTAS_SENSOR_TYPE_ISOLATION_STATE 9001
488 #define RTAS_SENSOR_TYPE_DR 9002
489 #define RTAS_SENSOR_TYPE_ALLOCATION_STATE 9003
490 #define RTAS_SENSOR_TYPE_ENTITY_SENSE RTAS_SENSOR_TYPE_ALLOCATION_STATE
492 /* Possible values for the platform-processor-diagnostics-run-mode parameter
493 * of the RTAS ibm,get-system-parameter call.
495 #define DIAGNOSTICS_RUN_MODE_DISABLED 0
496 #define DIAGNOSTICS_RUN_MODE_STAGGERED 1
497 #define DIAGNOSTICS_RUN_MODE_IMMEDIATE 2
498 #define DIAGNOSTICS_RUN_MODE_PERIODIC 3
500 static inline uint64_t ppc64_phys_to_real(uint64_t addr
)
502 return addr
& ~0xF000000000000000ULL
;
505 static inline uint32_t rtas_ld(target_ulong phys
, int n
)
507 return ldl_be_phys(&address_space_memory
, ppc64_phys_to_real(phys
+ 4*n
));
510 static inline uint64_t rtas_ldq(target_ulong phys
, int n
)
512 return (uint64_t)rtas_ld(phys
, n
) << 32 | rtas_ld(phys
, n
+ 1);
515 static inline void rtas_st(target_ulong phys
, int n
, uint32_t val
)
517 stl_be_phys(&address_space_memory
, ppc64_phys_to_real(phys
+ 4*n
), val
);
520 typedef void (*spapr_rtas_fn
)(PowerPCCPU
*cpu
, sPAPRMachineState
*sm
,
522 uint32_t nargs
, target_ulong args
,
523 uint32_t nret
, target_ulong rets
);
524 void spapr_rtas_register(int token
, const char *name
, spapr_rtas_fn fn
);
525 target_ulong
spapr_rtas_call(PowerPCCPU
*cpu
, sPAPRMachineState
*sm
,
526 uint32_t token
, uint32_t nargs
, target_ulong args
,
527 uint32_t nret
, target_ulong rets
);
528 int spapr_rtas_device_tree_setup(void *fdt
, hwaddr rtas_addr
,
531 #define SPAPR_TCE_PAGE_SHIFT 12
532 #define SPAPR_TCE_PAGE_SIZE (1ULL << SPAPR_TCE_PAGE_SHIFT)
533 #define SPAPR_TCE_PAGE_MASK (SPAPR_TCE_PAGE_SIZE - 1)
535 #define SPAPR_VIO_BASE_LIOBN 0x00000000
536 #define SPAPR_VIO_LIOBN(reg) (0x00000000 | (reg))
537 #define SPAPR_PCI_LIOBN(phb_index, window_num) \
538 (0x80000000 | ((phb_index) << 8) | (window_num))
539 #define SPAPR_IS_PCI_LIOBN(liobn) (!!((liobn) & 0x80000000))
540 #define SPAPR_PCI_DMA_WINDOW_NUM(liobn) ((liobn) & 0xff)
542 #define RTAS_ERROR_LOG_MAX 2048
544 #define RTAS_EVENT_SCAN_RATE 1
546 typedef struct sPAPRTCETable sPAPRTCETable
;
548 #define TYPE_SPAPR_TCE_TABLE "spapr-tce-table"
549 #define SPAPR_TCE_TABLE(obj) \
550 OBJECT_CHECK(sPAPRTCETable, (obj), TYPE_SPAPR_TCE_TABLE)
552 struct sPAPRTCETable
{
559 uint32_t mig_nb_table
;
564 MemoryRegion root
, iommu
;
565 struct VIOsPAPRDevice
*vdev
; /* for @bypass migration compatibility only */
566 QLIST_ENTRY(sPAPRTCETable
) list
;
569 sPAPRTCETable
*spapr_tce_find_by_liobn(target_ulong liobn
);
571 struct sPAPREventLogEntry
{
575 QTAILQ_ENTRY(sPAPREventLogEntry
) next
;
578 void spapr_events_init(sPAPRMachineState
*sm
);
579 void spapr_events_fdt_skel(void *fdt
, uint32_t epow_irq
);
580 int spapr_h_cas_compose_response(sPAPRMachineState
*sm
,
581 target_ulong addr
, target_ulong size
,
582 bool cpu_update
, bool memory_update
);
583 sPAPRTCETable
*spapr_tce_new_table(DeviceState
*owner
, uint32_t liobn
);
584 void spapr_tce_table_enable(sPAPRTCETable
*tcet
,
585 uint32_t page_shift
, uint64_t bus_offset
,
587 void spapr_tce_table_disable(sPAPRTCETable
*tcet
);
588 void spapr_tce_set_need_vfio(sPAPRTCETable
*tcet
, bool need_vfio
);
590 MemoryRegion
*spapr_tce_get_iommu(sPAPRTCETable
*tcet
);
591 int spapr_dma_dt(void *fdt
, int node_off
, const char *propname
,
592 uint32_t liobn
, uint64_t window
, uint32_t size
);
593 int spapr_tcet_dma_dt(void *fdt
, int node_off
, const char *propname
,
594 sPAPRTCETable
*tcet
);
595 void spapr_pci_switch_vga(bool big_endian
);
596 void spapr_hotplug_req_add_by_index(sPAPRDRConnector
*drc
);
597 void spapr_hotplug_req_remove_by_index(sPAPRDRConnector
*drc
);
598 void spapr_hotplug_req_add_by_count(sPAPRDRConnectorType drc_type
,
600 void spapr_hotplug_req_remove_by_count(sPAPRDRConnectorType drc_type
,
602 void spapr_cpu_init(sPAPRMachineState
*spapr
, PowerPCCPU
*cpu
, Error
**errp
);
603 void *spapr_populate_hotplug_cpu_dt(CPUState
*cs
, int *fdt_offset
,
604 sPAPRMachineState
*spapr
);
606 /* rtas-configure-connector state */
607 struct sPAPRConfigureConnectorState
{
611 QTAILQ_ENTRY(sPAPRConfigureConnectorState
) next
;
614 void spapr_ccs_reset_hook(void *opaque
);
616 #define TYPE_SPAPR_RTC "spapr-rtc"
617 #define TYPE_SPAPR_RNG "spapr-rng"
619 void spapr_rtc_read(DeviceState
*dev
, struct tm
*tm
, uint32_t *ns
);
620 int spapr_rtc_import_offset(DeviceState
*dev
, int64_t legacy_offset
);
622 int spapr_rng_populate_dt(void *fdt
);
624 #define SPAPR_MEMORY_BLOCK_SIZE (1 << 28) /* 256MB */
627 * This defines the maximum number of DIMM slots we can have for sPAPR
628 * guest. This is not defined by sPAPR but we are defining it to 32 slots
629 * based on default number of slots provided by PowerPC kernel.
631 #define SPAPR_MAX_RAM_SLOTS 32
633 /* 1GB alignment for hotplug memory region */
634 #define SPAPR_HOTPLUG_MEM_ALIGN (1ULL << 30)
637 * Number of 32 bit words in each LMB list entry in ibm,dynamic-memory
638 * property under ibm,dynamic-reconfiguration-memory node.
640 #define SPAPR_DR_LMB_LIST_ENTRY_SIZE 6
643 * Defines for flag value in ibm,dynamic-memory property under
644 * ibm,dynamic-reconfiguration-memory node.
646 #define SPAPR_LMB_FLAGS_ASSIGNED 0x00000008
647 #define SPAPR_LMB_FLAGS_DRC_INVALID 0x00000020
648 #define SPAPR_LMB_FLAGS_RESERVED 0x00000080
650 #endif /* HW_SPAPR_H */