| blob | d08d72b439235313cfc57acac0a3b624f9a2da1a |
1 # -*- Mode: Python -*-
2 # vim: filetype=python
3 #
5 ##
6 # = Remote desktop
7 ##
9 { 'include': 'sockets.json' }
11 ##
12 # @set_password:
13 #
14 # Sets the password of a remote display session.
15 #
16 # @protocol: - 'vnc' to modify the VNC server password
17 # - 'spice' to modify the Spice server password
18 #
19 # @password: the new password
20 #
21 # @connected: how to handle existing clients when changing the
22 # password. If nothing is specified, defaults to 'keep'
23 # 'fail' to fail the command if clients are connected
24 # 'disconnect' to disconnect existing clients
25 # 'keep' to maintain existing clients
26 #
27 # Returns: - Nothing on success
28 # - If Spice is not enabled, DeviceNotFound
29 #
30 # Since: 0.14
31 #
32 # Example:
33 #
34 # -> { "execute": "set_password", "arguments": { "protocol": "vnc",
35 # "password": "secret" } }
36 # <- { "return": {} }
37 #
38 ##
39 { 'command': 'set_password',
40 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
42 ##
43 # @expire_password:
44 #
45 # Expire the password of a remote display server.
46 #
47 # @protocol: the name of the remote display protocol 'vnc' or 'spice'
48 #
49 # @time: when to expire the password.
50 #
51 # - 'now' to expire the password immediately
52 # - 'never' to cancel password expiration
53 # - '+INT' where INT is the number of seconds from now (integer)
54 # - 'INT' where INT is the absolute time in seconds
55 #
56 # Returns: - Nothing on success
57 # - If @protocol is 'spice' and Spice is not active, DeviceNotFound
58 #
59 # Since: 0.14
60 #
61 # Notes: Time is relative to the server and currently there is no way to
62 # coordinate server time with client time. It is not recommended to
63 # use the absolute time version of the @time parameter unless you're
64 # sure you are on the same machine as the QEMU instance.
65 #
66 # Example:
67 #
68 # -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
69 # "time": "+60" } }
70 # <- { "return": {} }
71 #
72 ##
73 { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
75 ##
76 # @screendump:
77 #
78 # Write a PPM of the VGA screen to a file.
79 #
80 # @filename: the path of a new PPM file to store the image
81 #
82 # @device: ID of the display device that should be dumped. If this parameter
83 # is missing, the primary display will be used. (Since 2.12)
84 #
85 # @head: head to use in case the device supports multiple heads. If this
86 # parameter is missing, head #0 will be used. Also note that the head
87 # can only be specified in conjunction with the device ID. (Since 2.12)
88 #
89 # Returns: Nothing on success
90 #
91 # Since: 0.14
92 #
93 # Example:
94 #
95 # -> { "execute": "screendump",
96 # "arguments": { "filename": "/tmp/image" } }
97 # <- { "return": {} }
98 #
99 ##
100 { 'command': 'screendump',
101 'data': {'filename': 'str', '*device': 'str', '*head': 'int'},
102 'coroutine': true }
104 ##
105 # == Spice
106 ##
108 ##
109 # @SpiceBasicInfo:
110 #
111 # The basic information for SPICE network connection
112 #
113 # @host: IP address
114 #
115 # @port: port number
116 #
117 # @family: address family
118 #
119 # Since: 2.1
120 ##
121 { 'struct': 'SpiceBasicInfo',
122 'data': { 'host': 'str',
123 'port': 'str',
124 'family': 'NetworkAddressFamily' },
125 'if': 'defined(CONFIG_SPICE)' }
127 ##
128 # @SpiceServerInfo:
129 #
130 # Information about a SPICE server
131 #
132 # @auth: authentication method
133 #
134 # Since: 2.1
135 ##
136 { 'struct': 'SpiceServerInfo',
137 'base': 'SpiceBasicInfo',
138 'data': { '*auth': 'str' },
139 'if': 'defined(CONFIG_SPICE)' }
141 ##
142 # @SpiceChannel:
143 #
144 # Information about a SPICE client channel.
145 #
146 # @connection-id: SPICE connection id number. All channels with the same id
147 # belong to the same SPICE session.
148 #
149 # @channel-type: SPICE channel type number. "1" is the main control
150 # channel, filter for this one if you want to track spice
151 # sessions only
152 #
153 # @channel-id: SPICE channel ID number. Usually "0", might be different when
154 # multiple channels of the same type exist, such as multiple
155 # display channels in a multihead setup
156 #
157 # @tls: true if the channel is encrypted, false otherwise.
158 #
159 # Since: 0.14
160 ##
161 { 'struct': 'SpiceChannel',
162 'base': 'SpiceBasicInfo',
163 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
164 'tls': 'bool'},
165 'if': 'defined(CONFIG_SPICE)' }
167 ##
168 # @SpiceQueryMouseMode:
169 #
170 # An enumeration of Spice mouse states.
171 #
172 # @client: Mouse cursor position is determined by the client.
173 #
174 # @server: Mouse cursor position is determined by the server.
175 #
176 # @unknown: No information is available about mouse mode used by
177 # the spice server.
178 #
179 # Note: spice/enums.h has a SpiceMouseMode already, hence the name.
180 #
181 # Since: 1.1
182 ##
183 { 'enum': 'SpiceQueryMouseMode',
184 'data': [ 'client', 'server', 'unknown' ],
185 'if': 'defined(CONFIG_SPICE)' }
187 ##
188 # @SpiceInfo:
189 #
190 # Information about the SPICE session.
191 #
192 # @enabled: true if the SPICE server is enabled, false otherwise
193 #
194 # @migrated: true if the last guest migration completed and spice
195 # migration had completed as well. false otherwise. (since 1.4)
196 #
197 # @host: The hostname the SPICE server is bound to. This depends on
198 # the name resolution on the host and may be an IP address.
199 #
200 # @port: The SPICE server's port number.
201 #
202 # @compiled-version: SPICE server version.
203 #
204 # @tls-port: The SPICE server's TLS port number.
205 #
206 # @auth: the current authentication type used by the server
207 #
208 # - 'none' if no authentication is being used
209 # - 'spice' uses SASL or direct TLS authentication, depending on command
210 # line options
211 #
212 # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
213 # be determined by the client or the server, or unknown if spice
214 # server doesn't provide this information. (since: 1.1)
215 #
216 # @channels: a list of @SpiceChannel for each active spice channel
217 #
218 # Since: 0.14
219 ##
220 { 'struct': 'SpiceInfo',
221 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
222 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
223 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
224 'if': 'defined(CONFIG_SPICE)' }
226 ##
227 # @query-spice:
228 #
229 # Returns information about the current SPICE server
230 #
231 # Returns: @SpiceInfo
232 #
233 # Since: 0.14
234 #
235 # Example:
236 #
237 # -> { "execute": "query-spice" }
238 # <- { "return": {
239 # "enabled": true,
240 # "auth": "spice",
241 # "port": 5920,
242 # "tls-port": 5921,
243 # "host": "0.0.0.0",
244 # "channels": [
245 # {
246 # "port": "54924",
247 # "family": "ipv4",
248 # "channel-type": 1,
249 # "connection-id": 1804289383,
250 # "host": "127.0.0.1",
251 # "channel-id": 0,
252 # "tls": true
253 # },
254 # {
255 # "port": "36710",
256 # "family": "ipv4",
257 # "channel-type": 4,
258 # "connection-id": 1804289383,
259 # "host": "127.0.0.1",
260 # "channel-id": 0,
261 # "tls": false
262 # },
263 # [ ... more channels follow ... ]
264 # ]
265 # }
266 # }
267 #
268 ##
269 { 'command': 'query-spice', 'returns': 'SpiceInfo',
270 'if': 'defined(CONFIG_SPICE)' }
272 ##
273 # @SPICE_CONNECTED:
274 #
275 # Emitted when a SPICE client establishes a connection
276 #
277 # @server: server information
278 #
279 # @client: client information
280 #
281 # Since: 0.14
282 #
283 # Example:
284 #
285 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
286 # "event": "SPICE_CONNECTED",
287 # "data": {
288 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
289 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
290 # }}
291 #
292 ##
293 { 'event': 'SPICE_CONNECTED',
294 'data': { 'server': 'SpiceBasicInfo',
295 'client': 'SpiceBasicInfo' },
296 'if': 'defined(CONFIG_SPICE)' }
298 ##
299 # @SPICE_INITIALIZED:
300 #
301 # Emitted after initial handshake and authentication takes place (if any)
302 # and the SPICE channel is up and running
303 #
304 # @server: server information
305 #
306 # @client: client information
307 #
308 # Since: 0.14
309 #
310 # Example:
311 #
312 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
313 # "event": "SPICE_INITIALIZED",
314 # "data": {"server": {"auth": "spice", "port": "5921",
315 # "family": "ipv4", "host": "127.0.0.1"},
316 # "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
317 # "connection-id": 1804289383, "host": "127.0.0.1",
318 # "channel-id": 0, "tls": true}
319 # }}
320 #
321 ##
322 { 'event': 'SPICE_INITIALIZED',
323 'data': { 'server': 'SpiceServerInfo',
324 'client': 'SpiceChannel' },
325 'if': 'defined(CONFIG_SPICE)' }
327 ##
328 # @SPICE_DISCONNECTED:
329 #
330 # Emitted when the SPICE connection is closed
331 #
332 # @server: server information
333 #
334 # @client: client information
335 #
336 # Since: 0.14
337 #
338 # Example:
339 #
340 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
341 # "event": "SPICE_DISCONNECTED",
342 # "data": {
343 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
344 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
345 # }}
346 #
347 ##
348 { 'event': 'SPICE_DISCONNECTED',
349 'data': { 'server': 'SpiceBasicInfo',
350 'client': 'SpiceBasicInfo' },
351 'if': 'defined(CONFIG_SPICE)' }
353 ##
354 # @SPICE_MIGRATE_COMPLETED:
355 #
356 # Emitted when SPICE migration has completed
357 #
358 # Since: 1.3
359 #
360 # Example:
361 #
362 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
363 # "event": "SPICE_MIGRATE_COMPLETED" }
364 #
365 ##
366 { 'event': 'SPICE_MIGRATE_COMPLETED',
367 'if': 'defined(CONFIG_SPICE)' }
369 ##
370 # == VNC
371 ##
373 ##
374 # @VncBasicInfo:
375 #
376 # The basic information for vnc network connection
377 #
378 # @host: IP address
379 #
380 # @service: The service name of the vnc port. This may depend on the host
381 # system's service database so symbolic names should not be relied
382 # on.
383 #
384 # @family: address family
385 #
386 # @websocket: true in case the socket is a websocket (since 2.3).
387 #
388 # Since: 2.1
389 ##
390 { 'struct': 'VncBasicInfo',
391 'data': { 'host': 'str',
392 'service': 'str',
393 'family': 'NetworkAddressFamily',
394 'websocket': 'bool' },
395 'if': 'defined(CONFIG_VNC)' }
397 ##
398 # @VncServerInfo:
399 #
400 # The network connection information for server
401 #
402 # @auth: authentication method used for
403 # the plain (non-websocket) VNC server
404 #
405 # Since: 2.1
406 ##
407 { 'struct': 'VncServerInfo',
408 'base': 'VncBasicInfo',
409 'data': { '*auth': 'str' },
410 'if': 'defined(CONFIG_VNC)' }
412 ##
413 # @VncClientInfo:
414 #
415 # Information about a connected VNC client.
416 #
417 # @x509_dname: If x509 authentication is in use, the Distinguished
418 # Name of the client.
419 #
420 # @sasl_username: If SASL authentication is in use, the SASL username
421 # used for authentication.
422 #
423 # Since: 0.14
424 ##
425 { 'struct': 'VncClientInfo',
426 'base': 'VncBasicInfo',
427 'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
428 'if': 'defined(CONFIG_VNC)' }
430 ##
431 # @VncInfo:
432 #
433 # Information about the VNC session.
434 #
435 # @enabled: true if the VNC server is enabled, false otherwise
436 #
437 # @host: The hostname the VNC server is bound to. This depends on
438 # the name resolution on the host and may be an IP address.
439 #
440 # @family: - 'ipv6' if the host is listening for IPv6 connections
441 # - 'ipv4' if the host is listening for IPv4 connections
442 # - 'unix' if the host is listening on a unix domain socket
443 # - 'unknown' otherwise
444 #
445 # @service: The service name of the server's port. This may depends
446 # on the host system's service database so symbolic names should not
447 # be relied on.
448 #
449 # @auth: the current authentication type used by the server
450 #
451 # - 'none' if no authentication is being used
452 # - 'vnc' if VNC authentication is being used
453 # - 'vencrypt+plain' if VEncrypt is used with plain text authentication
454 # - 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
455 # - 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
456 # - 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
457 # - 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
458 # - 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
459 # - 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
460 # - 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
461 # - 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
462 #
463 # @clients: a list of @VncClientInfo of all currently connected clients
464 #
465 # Since: 0.14
466 ##
467 { 'struct': 'VncInfo',
468 'data': {'enabled': 'bool', '*host': 'str',
469 '*family': 'NetworkAddressFamily',
470 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
471 'if': 'defined(CONFIG_VNC)' }
473 ##
474 # @VncPrimaryAuth:
475 #
476 # vnc primary authentication method.
477 #
478 # Since: 2.3
479 ##
480 { 'enum': 'VncPrimaryAuth',
481 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
482 'tls', 'vencrypt', 'sasl' ],
483 'if': 'defined(CONFIG_VNC)' }
485 ##
486 # @VncVencryptSubAuth:
487 #
488 # vnc sub authentication method with vencrypt.
489 #
490 # Since: 2.3
491 ##
492 { 'enum': 'VncVencryptSubAuth',
493 'data': [ 'plain',
494 'tls-none', 'x509-none',
495 'tls-vnc', 'x509-vnc',
496 'tls-plain', 'x509-plain',
497 'tls-sasl', 'x509-sasl' ],
498 'if': 'defined(CONFIG_VNC)' }
500 ##
501 # @VncServerInfo2:
502 #
503 # The network connection information for server
504 #
505 # @auth: The current authentication type used by the servers
506 #
507 # @vencrypt: The vencrypt sub authentication type used by the
508 # servers, only specified in case auth == vencrypt.
509 #
510 # Since: 2.9
511 ##
512 { 'struct': 'VncServerInfo2',
513 'base': 'VncBasicInfo',
514 'data': { 'auth' : 'VncPrimaryAuth',
515 '*vencrypt' : 'VncVencryptSubAuth' },
516 'if': 'defined(CONFIG_VNC)' }
518 ##
519 # @VncInfo2:
520 #
521 # Information about a vnc server
522 #
523 # @id: vnc server name.
524 #
525 # @server: A list of @VncBasincInfo describing all listening sockets.
526 # The list can be empty (in case the vnc server is disabled).
527 # It also may have multiple entries: normal + websocket,
528 # possibly also ipv4 + ipv6 in the future.
529 #
530 # @clients: A list of @VncClientInfo of all currently connected clients.
531 # The list can be empty, for obvious reasons.
532 #
533 # @auth: The current authentication type used by the non-websockets servers
534 #
535 # @vencrypt: The vencrypt authentication type used by the servers,
536 # only specified in case auth == vencrypt.
537 #
538 # @display: The display device the vnc server is linked to.
539 #
540 # Since: 2.3
541 ##
542 { 'struct': 'VncInfo2',
543 'data': { 'id' : 'str',
544 'server' : ['VncServerInfo2'],
545 'clients' : ['VncClientInfo'],
546 'auth' : 'VncPrimaryAuth',
547 '*vencrypt' : 'VncVencryptSubAuth',
548 '*display' : 'str' },
549 'if': 'defined(CONFIG_VNC)' }
551 ##
552 # @query-vnc:
553 #
554 # Returns information about the current VNC server
555 #
556 # Returns: @VncInfo
557 #
558 # Since: 0.14
559 #
560 # Example:
561 #
562 # -> { "execute": "query-vnc" }
563 # <- { "return": {
564 # "enabled":true,
565 # "host":"0.0.0.0",
566 # "service":"50402",
567 # "auth":"vnc",
568 # "family":"ipv4",
569 # "clients":[
570 # {
571 # "host":"127.0.0.1",
572 # "service":"50401",
573 # "family":"ipv4"
574 # }
575 # ]
576 # }
577 # }
578 #
579 ##
580 { 'command': 'query-vnc', 'returns': 'VncInfo',
581 'if': 'defined(CONFIG_VNC)' }
582 ##
583 # @query-vnc-servers:
584 #
585 # Returns a list of vnc servers. The list can be empty.
586 #
587 # Returns: a list of @VncInfo2
588 #
589 # Since: 2.3
590 ##
591 { 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
592 'if': 'defined(CONFIG_VNC)' }
594 ##
595 # @change-vnc-password:
596 #
597 # Change the VNC server password.
598 #
599 # @password: the new password to use with VNC authentication
600 #
601 # Since: 1.1
602 #
603 # Notes: An empty password in this command will set the password to the empty
604 # string. Existing clients are unaffected by executing this command.
605 ##
606 { 'command': 'change-vnc-password',
607 'data': { 'password': 'str' },
608 'if': 'defined(CONFIG_VNC)' }
610 ##
611 # @VNC_CONNECTED:
612 #
613 # Emitted when a VNC client establishes a connection
614 #
615 # @server: server information
616 #
617 # @client: client information
618 #
619 # Note: This event is emitted before any authentication takes place, thus
620 # the authentication ID is not provided
621 #
622 # Since: 0.13
623 #
624 # Example:
625 #
626 # <- { "event": "VNC_CONNECTED",
627 # "data": {
628 # "server": { "auth": "sasl", "family": "ipv4",
629 # "service": "5901", "host": "0.0.0.0" },
630 # "client": { "family": "ipv4", "service": "58425",
631 # "host": "127.0.0.1" } },
632 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
633 #
634 ##
635 { 'event': 'VNC_CONNECTED',
636 'data': { 'server': 'VncServerInfo',
637 'client': 'VncBasicInfo' },
638 'if': 'defined(CONFIG_VNC)' }
640 ##
641 # @VNC_INITIALIZED:
642 #
643 # Emitted after authentication takes place (if any) and the VNC session is
644 # made active
645 #
646 # @server: server information
647 #
648 # @client: client information
649 #
650 # Since: 0.13
651 #
652 # Example:
653 #
654 # <- { "event": "VNC_INITIALIZED",
655 # "data": {
656 # "server": { "auth": "sasl", "family": "ipv4",
657 # "service": "5901", "host": "0.0.0.0"},
658 # "client": { "family": "ipv4", "service": "46089",
659 # "host": "127.0.0.1", "sasl_username": "luiz" } },
660 # "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
661 #
662 ##
663 { 'event': 'VNC_INITIALIZED',
664 'data': { 'server': 'VncServerInfo',
665 'client': 'VncClientInfo' },
666 'if': 'defined(CONFIG_VNC)' }
668 ##
669 # @VNC_DISCONNECTED:
670 #
671 # Emitted when the connection is closed
672 #
673 # @server: server information
674 #
675 # @client: client information
676 #
677 # Since: 0.13
678 #
679 # Example:
680 #
681 # <- { "event": "VNC_DISCONNECTED",
682 # "data": {
683 # "server": { "auth": "sasl", "family": "ipv4",
684 # "service": "5901", "host": "0.0.0.0" },
685 # "client": { "family": "ipv4", "service": "58425",
686 # "host": "127.0.0.1", "sasl_username": "luiz" } },
687 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
688 #
689 ##
690 { 'event': 'VNC_DISCONNECTED',
691 'data': { 'server': 'VncServerInfo',
692 'client': 'VncClientInfo' },
693 'if': 'defined(CONFIG_VNC)' }
695 ##
696 # = Input
697 ##
699 ##
700 # @MouseInfo:
701 #
702 # Information about a mouse device.
703 #
704 # @name: the name of the mouse device
705 #
706 # @index: the index of the mouse device
707 #
708 # @current: true if this device is currently receiving mouse events
709 #
710 # @absolute: true if this device supports absolute coordinates as input
711 #
712 # Since: 0.14
713 ##
714 { 'struct': 'MouseInfo',
715 'data': {'name': 'str', 'index': 'int', 'current': 'bool',
716 'absolute': 'bool'} }
718 ##
719 # @query-mice:
720 #
721 # Returns information about each active mouse device
722 #
723 # Returns: a list of @MouseInfo for each device
724 #
725 # Since: 0.14
726 #
727 # Example:
728 #
729 # -> { "execute": "query-mice" }
730 # <- { "return": [
731 # {
732 # "name":"QEMU Microsoft Mouse",
733 # "index":0,
734 # "current":false,
735 # "absolute":false
736 # },
737 # {
738 # "name":"QEMU PS/2 Mouse",
739 # "index":1,
740 # "current":true,
741 # "absolute":true
742 # }
743 # ]
744 # }
745 #
746 ##
747 { 'command': 'query-mice', 'returns': ['MouseInfo'] }
749 ##
750 # @QKeyCode:
751 #
752 # An enumeration of key name.
753 #
754 # This is used by the @send-key command.
755 #
756 # @unmapped: since 2.0
757 # @pause: since 2.0
758 # @ro: since 2.4
759 # @kp_comma: since 2.4
760 # @kp_equals: since 2.6
761 # @power: since 2.6
762 # @hiragana: since 2.9
763 # @henkan: since 2.9
764 # @yen: since 2.9
765 #
766 # @sleep: since 2.10
767 # @wake: since 2.10
768 # @audionext: since 2.10
769 # @audioprev: since 2.10
770 # @audiostop: since 2.10
771 # @audioplay: since 2.10
772 # @audiomute: since 2.10
773 # @volumeup: since 2.10
774 # @volumedown: since 2.10
775 # @mediaselect: since 2.10
776 # @mail: since 2.10
777 # @calculator: since 2.10
778 # @computer: since 2.10
779 # @ac_home: since 2.10
780 # @ac_back: since 2.10
781 # @ac_forward: since 2.10
782 # @ac_refresh: since 2.10
783 # @ac_bookmarks: since 2.10
784 #
785 # @muhenkan: since 2.12
786 # @katakanahiragana: since 2.12
787 #
788 # 'sysrq' was mistakenly added to hack around the fact that
789 # the ps2 driver was not generating correct scancodes sequences
790 # when 'alt+print' was pressed. This flaw is now fixed and the
791 # 'sysrq' key serves no further purpose. Any further use of
792 # 'sysrq' will be transparently changed to 'print', so they
793 # are effectively synonyms.
794 #
795 # Since: 1.3
796 #
797 ##
798 { 'enum': 'QKeyCode',
799 'data': [ 'unmapped',
800 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl',
801 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8',
802 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e',
803 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right',
804 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon',
805 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b',
806 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock',
807 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10',
808 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply',
809 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0',
810 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8',
811 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end',
812 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
813 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
814 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause',
815 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana',
816 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake',
817 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute',
818 'volumeup', 'volumedown', 'mediaselect',
819 'mail', 'calculator', 'computer',
820 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] }
822 ##
823 # @KeyValue:
824 #
825 # Represents a keyboard key.
826 #
827 # Since: 1.3
828 ##
829 { 'union': 'KeyValue',
830 'data': {
831 'number': 'int',
832 'qcode': 'QKeyCode' } }
834 ##
835 # @send-key:
836 #
837 # Send keys to guest.
838 #
839 # @keys: An array of @KeyValue elements. All @KeyValues in this array are
840 # simultaneously sent to the guest. A @KeyValue.number value is sent
841 # directly to the guest, while @KeyValue.qcode must be a valid
842 # @QKeyCode value
843 #
844 # @hold-time: time to delay key up events, milliseconds. Defaults
845 # to 100
846 #
847 # Returns: - Nothing on success
848 # - If key is unknown or redundant, InvalidParameter
849 #
850 # Since: 1.3
851 #
852 # Example:
853 #
854 # -> { "execute": "send-key",
855 # "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
856 # { "type": "qcode", "data": "alt" },
857 # { "type": "qcode", "data": "delete" } ] } }
858 # <- { "return": {} }
859 #
860 ##
861 { 'command': 'send-key',
862 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }
864 ##
865 # @InputButton:
866 #
867 # Button of a pointer input device (mouse, tablet).
868 #
869 # @side: front side button of a 5-button mouse (since 2.9)
870 #
871 # @extra: rear side button of a 5-button mouse (since 2.9)
872 #
873 # Since: 2.0
874 ##
875 { 'enum' : 'InputButton',
876 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
877 'extra' ] }
879 ##
880 # @InputAxis:
881 #
882 # Position axis of a pointer input device (mouse, tablet).
883 #
884 # Since: 2.0
885 ##
886 { 'enum' : 'InputAxis',
887 'data' : [ 'x', 'y' ] }
889 ##
890 # @InputKeyEvent:
891 #
892 # Keyboard input event.
893 #
894 # @key: Which key this event is for.
895 # @down: True for key-down and false for key-up events.
896 #
897 # Since: 2.0
898 ##
899 { 'struct' : 'InputKeyEvent',
900 'data' : { 'key' : 'KeyValue',
901 'down' : 'bool' } }
903 ##
904 # @InputBtnEvent:
905 #
906 # Pointer button input event.
907 #
908 # @button: Which button this event is for.
909 # @down: True for key-down and false for key-up events.
910 #
911 # Since: 2.0
912 ##
913 { 'struct' : 'InputBtnEvent',
914 'data' : { 'button' : 'InputButton',
915 'down' : 'bool' } }
917 ##
918 # @InputMoveEvent:
919 #
920 # Pointer motion input event.
921 #
922 # @axis: Which axis is referenced by @value.
923 # @value: Pointer position. For absolute coordinates the
924 # valid range is 0 -> 0x7ffff
925 #
926 # Since: 2.0
927 ##
928 { 'struct' : 'InputMoveEvent',
929 'data' : { 'axis' : 'InputAxis',
930 'value' : 'int' } }
932 ##
933 # @InputEvent:
934 #
935 # Input event union.
936 #
937 # @type: the input type, one of:
938 #
939 # - 'key': Input event of Keyboard
940 # - 'btn': Input event of pointer buttons
941 # - 'rel': Input event of relative pointer motion
942 # - 'abs': Input event of absolute pointer motion
943 #
944 # Since: 2.0
945 ##
946 { 'union' : 'InputEvent',
947 'data' : { 'key' : 'InputKeyEvent',
948 'btn' : 'InputBtnEvent',
949 'rel' : 'InputMoveEvent',
950 'abs' : 'InputMoveEvent' } }
952 ##
953 # @input-send-event:
954 #
955 # Send input event(s) to guest.
956 #
957 # The @device and @head parameters can be used to send the input event
958 # to specific input devices in case (a) multiple input devices of the
959 # same kind are added to the virtual machine and (b) you have
960 # configured input routing (see docs/multiseat.txt) for those input
961 # devices. The parameters work exactly like the device and head
962 # properties of input devices. If @device is missing, only devices
963 # that have no input routing config are admissible. If @device is
964 # specified, both input devices with and without input routing config
965 # are admissible, but devices with input routing config take
966 # precedence.
967 #
968 # @device: display device to send event(s) to.
969 # @head: head to send event(s) to, in case the
970 # display device supports multiple scanouts.
971 # @events: List of InputEvent union.
972 #
973 # Returns: Nothing on success.
974 #
975 # Since: 2.6
976 #
977 # Note: The consoles are visible in the qom tree, under
978 # /backend/console[$index]. They have a device link and head property,
979 # so it is possible to map which console belongs to which device and
980 # display.
981 #
982 # Example:
983 #
984 # 1. Press left mouse button.
985 #
986 # -> { "execute": "input-send-event",
987 # "arguments": { "device": "video0",
988 # "events": [ { "type": "btn",
989 # "data" : { "down": true, "button": "left" } } ] } }
990 # <- { "return": {} }
991 #
992 # -> { "execute": "input-send-event",
993 # "arguments": { "device": "video0",
994 # "events": [ { "type": "btn",
995 # "data" : { "down": false, "button": "left" } } ] } }
996 # <- { "return": {} }
997 #
998 # 2. Press ctrl-alt-del.
999 #
1000 # -> { "execute": "input-send-event",
1001 # "arguments": { "events": [
1002 # { "type": "key", "data" : { "down": true,
1003 # "key": {"type": "qcode", "data": "ctrl" } } },
1004 # { "type": "key", "data" : { "down": true,
1005 # "key": {"type": "qcode", "data": "alt" } } },
1006 # { "type": "key", "data" : { "down": true,
1007 # "key": {"type": "qcode", "data": "delete" } } } ] } }
1008 # <- { "return": {} }
1009 #
1010 # 3. Move mouse pointer to absolute coordinates (20000, 400).
1011 #
1012 # -> { "execute": "input-send-event" ,
1013 # "arguments": { "events": [
1014 # { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
1015 # { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
1016 # <- { "return": {} }
1017 #
1018 ##
1019 { 'command': 'input-send-event',
1020 'data': { '*device': 'str',
1021 '*head' : 'int',
1022 'events' : [ 'InputEvent' ] } }
1024 ##
1025 # @GrabToggleKeys:
1026 #
1027 # Keys to toggle input-linux between host and guest.
1028 #
1029 # Since: 4.0
1030 #
1031 ##
1032 { 'enum': 'GrabToggleKeys',
1033 'data': [ 'ctrl-ctrl', 'alt-alt', 'shift-shift','meta-meta', 'scrolllock',
1034 'ctrl-scrolllock' ] }
1036 ##
1037 # @DisplayGTK:
1038 #
1039 # GTK display options.
1040 #
1041 # @grab-on-hover: Grab keyboard input on mouse hover.
1042 # @zoom-to-fit: Zoom guest display to fit into the host window. When
1043 # turned off the host window will be resized instead.
1044 # In case the display device can notify the guest on
1045 # window resizes (virtio-gpu) this will default to "on",
1046 # assuming the guest will resize the display to match
1047 # the window size then. Otherwise it defaults to "off".
1048 # Since 3.1
1049 #
1050 # Since: 2.12
1051 #
1052 ##
1053 { 'struct' : 'DisplayGTK',
1054 'data' : { '*grab-on-hover' : 'bool',
1055 '*zoom-to-fit' : 'bool' } }
1057 ##
1058 # @DisplayEGLHeadless:
1059 #
1060 # EGL headless display options.
1061 #
1062 # @rendernode: Which DRM render node should be used. Default is the first
1063 # available node on the host.
1064 #
1065 # Since: 3.1
1066 #
1067 ##
1068 { 'struct' : 'DisplayEGLHeadless',
1069 'data' : { '*rendernode' : 'str' } }
1071 ##
1072 # @DisplayGLMode:
1073 #
1074 # Display OpenGL mode.
1075 #
1076 # @off: Disable OpenGL (default).
1077 # @on: Use OpenGL, pick context type automatically.
1078 # Would better be named 'auto' but is called 'on' for backward
1079 # compatibility with bool type.
1080 # @core: Use OpenGL with Core (desktop) Context.
1081 # @es: Use OpenGL with ES (embedded systems) Context.
1082 #
1083 # Since: 3.0
1084 #
1085 ##
1086 { 'enum' : 'DisplayGLMode',
1087 'data' : [ 'off', 'on', 'core', 'es' ] }
1089 ##
1090 # @DisplayCurses:
1091 #
1092 # Curses display options.
1093 #
1094 # @charset: Font charset used by guest (default: CP437).
1095 #
1096 # Since: 4.0
1097 #
1098 ##
1099 { 'struct' : 'DisplayCurses',
1100 'data' : { '*charset' : 'str' } }
1102 ##
1103 # @DisplayType:
1104 #
1105 # Display (user interface) type.
1106 #
1107 # @default: The default user interface, selecting from the first available
1108 # of gtk, sdl, cocoa, and vnc.
1109 #
1110 # @none: No user interface or video output display. The guest will
1111 # still see an emulated graphics card, but its output will not
1112 # be displayed to the QEMU user.
1113 #
1114 # @gtk: The GTK user interface.
1115 #
1116 # @sdl: The SDL user interface.
1117 #
1118 # @egl-headless: No user interface, offload GL operations to a local
1119 # DRI device. Graphical display need to be paired with
1120 # VNC or Spice. (Since 3.1)
1121 #
1122 # @curses: Display video output via curses. For graphics device
1123 # models which support a text mode, QEMU can display this
1124 # output using a curses/ncurses interface. Nothing is
1125 # displayed when the graphics device is in graphical mode or
1126 # if the graphics device does not support a text
1127 # mode. Generally only the VGA device models support text
1128 # mode.
1129 #
1130 # @cocoa: The Cocoa user interface.
1131 #
1132 # @spice-app: Set up a Spice server and run the default associated
1133 # application to connect to it. The server will redirect
1134 # the serial console and QEMU monitors. (Since 4.0)
1135 #
1136 # Since: 2.12
1137 #
1138 ##
1139 { 'enum' : 'DisplayType',
1140 'data' : [ 'default', 'none', 'gtk', 'sdl',
1141 'egl-headless', 'curses', 'cocoa',
1142 'spice-app'] }
1144 ##
1145 # @DisplayOptions:
1146 #
1147 # Display (user interface) options.
1148 #
1149 # @type: Which DisplayType qemu should use.
1150 # @full-screen: Start user interface in fullscreen mode (default: off).
1151 # @window-close: Allow to quit qemu with window close button (default: on).
1152 # @show-cursor: Force showing the mouse cursor (default: off).
1153 # (since: 5.0)
1154 # @gl: Enable OpenGL support (default: off).
1155 #
1156 # Since: 2.12
1157 #
1158 ##
1159 { 'union' : 'DisplayOptions',
1160 'base' : { 'type' : 'DisplayType',
1161 '*full-screen' : 'bool',
1162 '*window-close' : 'bool',
1163 '*show-cursor' : 'bool',
1164 '*gl' : 'DisplayGLMode' },
1165 'discriminator' : 'type',
1166 'data' : { 'gtk' : 'DisplayGTK',
1167 'curses' : 'DisplayCurses',
1168 'egl-headless' : 'DisplayEGLHeadless'} }
1170 ##
1171 # @query-display-options:
1172 #
1173 # Returns information about display configuration
1174 #
1175 # Returns: @DisplayOptions
1176 #
1177 # Since: 3.1
1178 #
1179 ##
1180 { 'command': 'query-display-options',
1181 'returns': 'DisplayOptions' }