hw/arm/smmuv3: Support nested SMMUs in smmuv3_notify_iova()
[qemu/ar7.git] / net / vhost-vdpa.c
blobdaa38428c5d46e8975f6a2195d80dc3b80ea7626
1 /*
2 * vhost-vdpa.c
4 * Copyright(c) 2017-2018 Intel Corporation.
5 * Copyright(c) 2020 Red Hat, Inc.
7 * This work is licensed under the terms of the GNU GPL, version 2 or later.
8 * See the COPYING file in the top-level directory.
12 #include "qemu/osdep.h"
13 #include "clients.h"
14 #include "hw/virtio/virtio-net.h"
15 #include "net/vhost_net.h"
16 #include "net/vhost-vdpa.h"
17 #include "hw/virtio/vhost-vdpa.h"
18 #include "qemu/config-file.h"
19 #include "qemu/error-report.h"
20 #include "qemu/log.h"
21 #include "qemu/memalign.h"
22 #include "qemu/option.h"
23 #include "qapi/error.h"
24 #include <linux/vhost.h>
25 #include <sys/ioctl.h>
26 #include <err.h>
27 #include "standard-headers/linux/virtio_net.h"
28 #include "monitor/monitor.h"
29 #include "migration/misc.h"
30 #include "hw/virtio/vhost.h"
31 #include "trace.h"
33 /* Todo:need to add the multiqueue support here */
34 typedef struct VhostVDPAState {
35 NetClientState nc;
36 struct vhost_vdpa vhost_vdpa;
37 NotifierWithReturn migration_state;
38 VHostNetState *vhost_net;
40 /* Control commands shadow buffers */
41 void *cvq_cmd_out_buffer;
42 virtio_net_ctrl_ack *status;
44 /* The device always have SVQ enabled */
45 bool always_svq;
47 /* The device can isolate CVQ in its own ASID */
48 bool cvq_isolated;
50 bool started;
51 } VhostVDPAState;
54 * The array is sorted alphabetically in ascending order,
55 * with the exception of VHOST_INVALID_FEATURE_BIT,
56 * which should always be the last entry.
58 const int vdpa_feature_bits[] = {
59 VIRTIO_F_ANY_LAYOUT,
60 VIRTIO_F_IOMMU_PLATFORM,
61 VIRTIO_F_NOTIFY_ON_EMPTY,
62 VIRTIO_F_RING_PACKED,
63 VIRTIO_F_RING_RESET,
64 VIRTIO_F_VERSION_1,
65 VIRTIO_F_NOTIFICATION_DATA,
66 VIRTIO_NET_F_CSUM,
67 VIRTIO_NET_F_CTRL_GUEST_OFFLOADS,
68 VIRTIO_NET_F_CTRL_MAC_ADDR,
69 VIRTIO_NET_F_CTRL_RX,
70 VIRTIO_NET_F_CTRL_RX_EXTRA,
71 VIRTIO_NET_F_CTRL_VLAN,
72 VIRTIO_NET_F_CTRL_VQ,
73 VIRTIO_NET_F_GSO,
74 VIRTIO_NET_F_GUEST_CSUM,
75 VIRTIO_NET_F_GUEST_ECN,
76 VIRTIO_NET_F_GUEST_TSO4,
77 VIRTIO_NET_F_GUEST_TSO6,
78 VIRTIO_NET_F_GUEST_UFO,
79 VIRTIO_NET_F_GUEST_USO4,
80 VIRTIO_NET_F_GUEST_USO6,
81 VIRTIO_NET_F_HASH_REPORT,
82 VIRTIO_NET_F_HOST_ECN,
83 VIRTIO_NET_F_HOST_TSO4,
84 VIRTIO_NET_F_HOST_TSO6,
85 VIRTIO_NET_F_HOST_UFO,
86 VIRTIO_NET_F_HOST_USO,
87 VIRTIO_NET_F_MQ,
88 VIRTIO_NET_F_MRG_RXBUF,
89 VIRTIO_NET_F_MTU,
90 VIRTIO_NET_F_RSS,
91 VIRTIO_NET_F_STATUS,
92 VIRTIO_RING_F_EVENT_IDX,
93 VIRTIO_RING_F_INDIRECT_DESC,
95 /* VHOST_INVALID_FEATURE_BIT should always be the last entry */
96 VHOST_INVALID_FEATURE_BIT
99 /** Supported device specific feature bits with SVQ */
100 static const uint64_t vdpa_svq_device_features =
101 BIT_ULL(VIRTIO_NET_F_CSUM) |
102 BIT_ULL(VIRTIO_NET_F_GUEST_CSUM) |
103 BIT_ULL(VIRTIO_NET_F_CTRL_GUEST_OFFLOADS) |
104 BIT_ULL(VIRTIO_NET_F_MTU) |
105 BIT_ULL(VIRTIO_NET_F_MAC) |
106 BIT_ULL(VIRTIO_NET_F_GUEST_TSO4) |
107 BIT_ULL(VIRTIO_NET_F_GUEST_TSO6) |
108 BIT_ULL(VIRTIO_NET_F_GUEST_ECN) |
109 BIT_ULL(VIRTIO_NET_F_GUEST_UFO) |
110 BIT_ULL(VIRTIO_NET_F_HOST_TSO4) |
111 BIT_ULL(VIRTIO_NET_F_HOST_TSO6) |
112 BIT_ULL(VIRTIO_NET_F_HOST_ECN) |
113 BIT_ULL(VIRTIO_NET_F_HOST_UFO) |
114 BIT_ULL(VIRTIO_NET_F_MRG_RXBUF) |
115 BIT_ULL(VIRTIO_NET_F_STATUS) |
116 BIT_ULL(VIRTIO_NET_F_CTRL_VQ) |
117 BIT_ULL(VIRTIO_NET_F_CTRL_RX) |
118 BIT_ULL(VIRTIO_NET_F_CTRL_VLAN) |
119 BIT_ULL(VIRTIO_NET_F_CTRL_RX_EXTRA) |
120 BIT_ULL(VIRTIO_NET_F_MQ) |
121 BIT_ULL(VIRTIO_F_ANY_LAYOUT) |
122 BIT_ULL(VIRTIO_NET_F_CTRL_MAC_ADDR) |
123 /* VHOST_F_LOG_ALL is exposed by SVQ */
124 BIT_ULL(VHOST_F_LOG_ALL) |
125 BIT_ULL(VIRTIO_NET_F_HASH_REPORT) |
126 BIT_ULL(VIRTIO_NET_F_RSS) |
127 BIT_ULL(VIRTIO_NET_F_RSC_EXT) |
128 BIT_ULL(VIRTIO_NET_F_STANDBY) |
129 BIT_ULL(VIRTIO_NET_F_SPEED_DUPLEX);
131 #define VHOST_VDPA_NET_CVQ_ASID 1
133 VHostNetState *vhost_vdpa_get_vhost_net(NetClientState *nc)
135 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
136 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
137 return s->vhost_net;
140 static size_t vhost_vdpa_net_cvq_cmd_len(void)
143 * MAC_TABLE_SET is the ctrl command that produces the longer out buffer.
144 * In buffer is always 1 byte, so it should fit here
146 return sizeof(struct virtio_net_ctrl_hdr) +
147 2 * sizeof(struct virtio_net_ctrl_mac) +
148 MAC_TABLE_ENTRIES * ETH_ALEN;
151 static size_t vhost_vdpa_net_cvq_cmd_page_len(void)
153 return ROUND_UP(vhost_vdpa_net_cvq_cmd_len(), qemu_real_host_page_size());
156 static bool vhost_vdpa_net_valid_svq_features(uint64_t features, Error **errp)
158 uint64_t invalid_dev_features =
159 features & ~vdpa_svq_device_features &
160 /* Transport are all accepted at this point */
161 ~MAKE_64BIT_MASK(VIRTIO_TRANSPORT_F_START,
162 VIRTIO_TRANSPORT_F_END - VIRTIO_TRANSPORT_F_START);
164 if (invalid_dev_features) {
165 error_setg(errp, "vdpa svq does not work with features 0x%" PRIx64,
166 invalid_dev_features);
167 return false;
170 return vhost_svq_valid_features(features, errp);
173 static int vhost_vdpa_net_check_device_id(struct vhost_net *net)
175 uint32_t device_id;
176 int ret;
177 struct vhost_dev *hdev;
179 hdev = (struct vhost_dev *)&net->dev;
180 ret = hdev->vhost_ops->vhost_get_device_id(hdev, &device_id);
181 if (device_id != VIRTIO_ID_NET) {
182 return -ENOTSUP;
184 return ret;
187 static int vhost_vdpa_add(NetClientState *ncs, void *be,
188 int queue_pair_index, int nvqs)
190 VhostNetOptions options;
191 struct vhost_net *net = NULL;
192 VhostVDPAState *s;
193 int ret;
195 options.backend_type = VHOST_BACKEND_TYPE_VDPA;
196 assert(ncs->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
197 s = DO_UPCAST(VhostVDPAState, nc, ncs);
198 options.net_backend = ncs;
199 options.opaque = be;
200 options.busyloop_timeout = 0;
201 options.nvqs = nvqs;
203 net = vhost_net_init(&options);
204 if (!net) {
205 error_report("failed to init vhost_net for queue");
206 goto err_init;
208 s->vhost_net = net;
209 ret = vhost_vdpa_net_check_device_id(net);
210 if (ret) {
211 goto err_check;
213 return 0;
214 err_check:
215 vhost_net_cleanup(net);
216 g_free(net);
217 err_init:
218 return -1;
221 static void vhost_vdpa_cleanup(NetClientState *nc)
223 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
226 * If a peer NIC is attached, do not cleanup anything.
227 * Cleanup will happen as a part of qemu_cleanup() -> net_cleanup()
228 * when the guest is shutting down.
230 if (nc->peer && nc->peer->info->type == NET_CLIENT_DRIVER_NIC) {
231 return;
233 munmap(s->cvq_cmd_out_buffer, vhost_vdpa_net_cvq_cmd_page_len());
234 munmap(s->status, vhost_vdpa_net_cvq_cmd_page_len());
235 if (s->vhost_net) {
236 vhost_net_cleanup(s->vhost_net);
237 g_free(s->vhost_net);
238 s->vhost_net = NULL;
240 if (s->vhost_vdpa.index != 0) {
241 return;
243 qemu_close(s->vhost_vdpa.shared->device_fd);
244 g_free(s->vhost_vdpa.shared);
247 /** Dummy SetSteeringEBPF to support RSS for vhost-vdpa backend */
248 static bool vhost_vdpa_set_steering_ebpf(NetClientState *nc, int prog_fd)
250 return true;
253 static bool vhost_vdpa_has_vnet_hdr(NetClientState *nc)
255 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
257 return true;
260 static bool vhost_vdpa_has_ufo(NetClientState *nc)
262 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
263 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
264 uint64_t features = 0;
265 features |= (1ULL << VIRTIO_NET_F_HOST_UFO);
266 features = vhost_net_get_features(s->vhost_net, features);
267 return !!(features & (1ULL << VIRTIO_NET_F_HOST_UFO));
271 static bool vhost_vdpa_check_peer_type(NetClientState *nc, ObjectClass *oc,
272 Error **errp)
274 const char *driver = object_class_get_name(oc);
276 if (!g_str_has_prefix(driver, "virtio-net-")) {
277 error_setg(errp, "vhost-vdpa requires frontend driver virtio-net-*");
278 return false;
281 return true;
284 /** Dummy receive in case qemu falls back to userland tap networking */
285 static ssize_t vhost_vdpa_receive(NetClientState *nc, const uint8_t *buf,
286 size_t size)
288 return size;
292 /** From any vdpa net client, get the netclient of the i-th queue pair */
293 static VhostVDPAState *vhost_vdpa_net_get_nc_vdpa(VhostVDPAState *s, int i)
295 NICState *nic = qemu_get_nic(s->nc.peer);
296 NetClientState *nc_i = qemu_get_peer(nic->ncs, i);
298 return DO_UPCAST(VhostVDPAState, nc, nc_i);
301 static VhostVDPAState *vhost_vdpa_net_first_nc_vdpa(VhostVDPAState *s)
303 return vhost_vdpa_net_get_nc_vdpa(s, 0);
306 static void vhost_vdpa_net_log_global_enable(VhostVDPAState *s, bool enable)
308 struct vhost_vdpa *v = &s->vhost_vdpa;
309 VirtIONet *n;
310 VirtIODevice *vdev;
311 int data_queue_pairs, cvq, r;
313 /* We are only called on the first data vqs and only if x-svq is not set */
314 if (s->vhost_vdpa.shadow_vqs_enabled == enable) {
315 return;
318 vdev = v->dev->vdev;
319 n = VIRTIO_NET(vdev);
320 if (!n->vhost_started) {
321 return;
324 data_queue_pairs = n->multiqueue ? n->max_queue_pairs : 1;
325 cvq = virtio_vdev_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) ?
326 n->max_ncs - n->max_queue_pairs : 0;
327 v->shared->svq_switching = enable ?
328 SVQ_TSTATE_ENABLING : SVQ_TSTATE_DISABLING;
330 * TODO: vhost_net_stop does suspend, get_base and reset. We can be smarter
331 * in the future and resume the device if read-only operations between
332 * suspend and reset goes wrong.
334 vhost_net_stop(vdev, n->nic->ncs, data_queue_pairs, cvq);
336 /* Start will check migration setup_or_active to configure or not SVQ */
337 r = vhost_net_start(vdev, n->nic->ncs, data_queue_pairs, cvq);
338 if (unlikely(r < 0)) {
339 error_report("unable to start vhost net: %s(%d)", g_strerror(-r), -r);
341 v->shared->svq_switching = SVQ_TSTATE_DONE;
344 static int vdpa_net_migration_state_notifier(NotifierWithReturn *notifier,
345 MigrationEvent *e, Error **errp)
347 VhostVDPAState *s = container_of(notifier, VhostVDPAState, migration_state);
349 if (e->type == MIG_EVENT_PRECOPY_SETUP) {
350 vhost_vdpa_net_log_global_enable(s, true);
351 } else if (e->type == MIG_EVENT_PRECOPY_FAILED) {
352 vhost_vdpa_net_log_global_enable(s, false);
354 return 0;
357 static void vhost_vdpa_net_data_start_first(VhostVDPAState *s)
359 struct vhost_vdpa *v = &s->vhost_vdpa;
361 migration_add_notifier(&s->migration_state,
362 vdpa_net_migration_state_notifier);
363 if (v->shadow_vqs_enabled) {
364 v->shared->iova_tree = vhost_iova_tree_new(v->shared->iova_range.first,
365 v->shared->iova_range.last);
369 static int vhost_vdpa_net_data_start(NetClientState *nc)
371 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
372 struct vhost_vdpa *v = &s->vhost_vdpa;
374 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
376 if (s->always_svq ||
377 migration_is_setup_or_active()) {
378 v->shadow_vqs_enabled = true;
379 } else {
380 v->shadow_vqs_enabled = false;
383 if (v->index == 0) {
384 v->shared->shadow_data = v->shadow_vqs_enabled;
385 vhost_vdpa_net_data_start_first(s);
386 return 0;
389 return 0;
392 static int vhost_vdpa_net_data_load(NetClientState *nc)
394 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
395 struct vhost_vdpa *v = &s->vhost_vdpa;
396 bool has_cvq = v->dev->vq_index_end % 2;
398 if (has_cvq) {
399 return 0;
402 for (int i = 0; i < v->dev->nvqs; ++i) {
403 int ret = vhost_vdpa_set_vring_ready(v, i + v->dev->vq_index);
404 if (ret < 0) {
405 return ret;
408 return 0;
411 static void vhost_vdpa_net_client_stop(NetClientState *nc)
413 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
414 struct vhost_dev *dev;
416 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
418 if (s->vhost_vdpa.index == 0) {
419 migration_remove_notifier(&s->migration_state);
422 dev = s->vhost_vdpa.dev;
423 if (dev->vq_index + dev->nvqs == dev->vq_index_end) {
424 g_clear_pointer(&s->vhost_vdpa.shared->iova_tree,
425 vhost_iova_tree_delete);
429 static NetClientInfo net_vhost_vdpa_info = {
430 .type = NET_CLIENT_DRIVER_VHOST_VDPA,
431 .size = sizeof(VhostVDPAState),
432 .receive = vhost_vdpa_receive,
433 .start = vhost_vdpa_net_data_start,
434 .load = vhost_vdpa_net_data_load,
435 .stop = vhost_vdpa_net_client_stop,
436 .cleanup = vhost_vdpa_cleanup,
437 .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
438 .has_ufo = vhost_vdpa_has_ufo,
439 .check_peer_type = vhost_vdpa_check_peer_type,
440 .set_steering_ebpf = vhost_vdpa_set_steering_ebpf,
443 static int64_t vhost_vdpa_get_vring_group(int device_fd, unsigned vq_index,
444 Error **errp)
446 struct vhost_vring_state state = {
447 .index = vq_index,
449 int r = ioctl(device_fd, VHOST_VDPA_GET_VRING_GROUP, &state);
451 if (unlikely(r < 0)) {
452 r = -errno;
453 error_setg_errno(errp, errno, "Cannot get VQ %u group", vq_index);
454 return r;
457 return state.num;
460 static int vhost_vdpa_set_address_space_id(struct vhost_vdpa *v,
461 unsigned vq_group,
462 unsigned asid_num)
464 struct vhost_vring_state asid = {
465 .index = vq_group,
466 .num = asid_num,
468 int r;
470 trace_vhost_vdpa_set_address_space_id(v, vq_group, asid_num);
472 r = ioctl(v->shared->device_fd, VHOST_VDPA_SET_GROUP_ASID, &asid);
473 if (unlikely(r < 0)) {
474 error_report("Can't set vq group %u asid %u, errno=%d (%s)",
475 asid.index, asid.num, errno, g_strerror(errno));
477 return r;
480 static void vhost_vdpa_cvq_unmap_buf(struct vhost_vdpa *v, void *addr)
482 VhostIOVATree *tree = v->shared->iova_tree;
483 DMAMap needle = {
485 * No need to specify size or to look for more translations since
486 * this contiguous chunk was allocated by us.
488 .translated_addr = (hwaddr)(uintptr_t)addr,
490 const DMAMap *map = vhost_iova_tree_find_iova(tree, &needle);
491 int r;
493 if (unlikely(!map)) {
494 error_report("Cannot locate expected map");
495 return;
498 r = vhost_vdpa_dma_unmap(v->shared, v->address_space_id, map->iova,
499 map->size + 1);
500 if (unlikely(r != 0)) {
501 error_report("Device cannot unmap: %s(%d)", g_strerror(r), r);
504 vhost_iova_tree_remove(tree, *map);
507 /** Map CVQ buffer. */
508 static int vhost_vdpa_cvq_map_buf(struct vhost_vdpa *v, void *buf, size_t size,
509 bool write)
511 DMAMap map = {};
512 int r;
514 map.translated_addr = (hwaddr)(uintptr_t)buf;
515 map.size = size - 1;
516 map.perm = write ? IOMMU_RW : IOMMU_RO,
517 r = vhost_iova_tree_map_alloc(v->shared->iova_tree, &map);
518 if (unlikely(r != IOVA_OK)) {
519 error_report("Cannot map injected element");
520 return r;
523 r = vhost_vdpa_dma_map(v->shared, v->address_space_id, map.iova,
524 vhost_vdpa_net_cvq_cmd_page_len(), buf, !write);
525 if (unlikely(r < 0)) {
526 goto dma_map_err;
529 return 0;
531 dma_map_err:
532 vhost_iova_tree_remove(v->shared->iova_tree, map);
533 return r;
536 static int vhost_vdpa_net_cvq_start(NetClientState *nc)
538 VhostVDPAState *s, *s0;
539 struct vhost_vdpa *v;
540 int64_t cvq_group;
541 int r;
542 Error *err = NULL;
544 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
546 s = DO_UPCAST(VhostVDPAState, nc, nc);
547 v = &s->vhost_vdpa;
549 s0 = vhost_vdpa_net_first_nc_vdpa(s);
550 v->shadow_vqs_enabled = s0->vhost_vdpa.shadow_vqs_enabled;
551 s->vhost_vdpa.address_space_id = VHOST_VDPA_GUEST_PA_ASID;
553 if (v->shared->shadow_data) {
554 /* SVQ is already configured for all virtqueues */
555 goto out;
559 * If we early return in these cases SVQ will not be enabled. The migration
560 * will be blocked as long as vhost-vdpa backends will not offer _F_LOG.
562 if (!vhost_vdpa_net_valid_svq_features(v->dev->features, NULL)) {
563 return 0;
566 if (!s->cvq_isolated) {
567 return 0;
570 cvq_group = vhost_vdpa_get_vring_group(v->shared->device_fd,
571 v->dev->vq_index_end - 1,
572 &err);
573 if (unlikely(cvq_group < 0)) {
574 error_report_err(err);
575 return cvq_group;
578 r = vhost_vdpa_set_address_space_id(v, cvq_group, VHOST_VDPA_NET_CVQ_ASID);
579 if (unlikely(r < 0)) {
580 return r;
583 v->shadow_vqs_enabled = true;
584 s->vhost_vdpa.address_space_id = VHOST_VDPA_NET_CVQ_ASID;
586 out:
587 if (!s->vhost_vdpa.shadow_vqs_enabled) {
588 return 0;
592 * If other vhost_vdpa already have an iova_tree, reuse it for simplicity,
593 * whether CVQ shares ASID with guest or not, because:
594 * - Memory listener need access to guest's memory addresses allocated in
595 * the IOVA tree.
596 * - There should be plenty of IOVA address space for both ASID not to
597 * worry about collisions between them. Guest's translations are still
598 * validated with virtio virtqueue_pop so there is no risk for the guest
599 * to access memory that it shouldn't.
601 * To allocate a iova tree per ASID is doable but it complicates the code
602 * and it is not worth it for the moment.
604 if (!v->shared->iova_tree) {
605 v->shared->iova_tree = vhost_iova_tree_new(v->shared->iova_range.first,
606 v->shared->iova_range.last);
609 r = vhost_vdpa_cvq_map_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer,
610 vhost_vdpa_net_cvq_cmd_page_len(), false);
611 if (unlikely(r < 0)) {
612 return r;
615 r = vhost_vdpa_cvq_map_buf(&s->vhost_vdpa, s->status,
616 vhost_vdpa_net_cvq_cmd_page_len(), true);
617 if (unlikely(r < 0)) {
618 vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer);
621 return r;
624 static void vhost_vdpa_net_cvq_stop(NetClientState *nc)
626 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
628 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
630 if (s->vhost_vdpa.shadow_vqs_enabled) {
631 vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->cvq_cmd_out_buffer);
632 vhost_vdpa_cvq_unmap_buf(&s->vhost_vdpa, s->status);
635 vhost_vdpa_net_client_stop(nc);
638 static ssize_t vhost_vdpa_net_cvq_add(VhostVDPAState *s,
639 const struct iovec *out_sg, size_t out_num,
640 const struct iovec *in_sg, size_t in_num)
642 VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0);
643 int r;
645 r = vhost_svq_add(svq, out_sg, out_num, in_sg, in_num, NULL);
646 if (unlikely(r != 0)) {
647 if (unlikely(r == -ENOSPC)) {
648 qemu_log_mask(LOG_GUEST_ERROR, "%s: No space on device queue\n",
649 __func__);
653 return r;
657 * Convenience wrapper to poll SVQ for multiple control commands.
659 * Caller should hold the BQL when invoking this function, and should take
660 * the answer before SVQ pulls by itself when BQL is released.
662 static ssize_t vhost_vdpa_net_svq_poll(VhostVDPAState *s, size_t cmds_in_flight)
664 VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0);
665 return vhost_svq_poll(svq, cmds_in_flight);
668 static void vhost_vdpa_net_load_cursor_reset(VhostVDPAState *s,
669 struct iovec *out_cursor,
670 struct iovec *in_cursor)
672 /* reset the cursor of the output buffer for the device */
673 out_cursor->iov_base = s->cvq_cmd_out_buffer;
674 out_cursor->iov_len = vhost_vdpa_net_cvq_cmd_page_len();
676 /* reset the cursor of the in buffer for the device */
677 in_cursor->iov_base = s->status;
678 in_cursor->iov_len = vhost_vdpa_net_cvq_cmd_page_len();
682 * Poll SVQ for multiple pending control commands and check the device's ack.
684 * Caller should hold the BQL when invoking this function.
686 * @s: The VhostVDPAState
687 * @len: The length of the pending status shadow buffer
689 static ssize_t vhost_vdpa_net_svq_flush(VhostVDPAState *s, size_t len)
691 /* device uses a one-byte length ack for each control command */
692 ssize_t dev_written = vhost_vdpa_net_svq_poll(s, len);
693 if (unlikely(dev_written != len)) {
694 return -EIO;
697 /* check the device's ack */
698 for (int i = 0; i < len; ++i) {
699 if (s->status[i] != VIRTIO_NET_OK) {
700 return -EIO;
703 return 0;
706 static ssize_t vhost_vdpa_net_load_cmd(VhostVDPAState *s,
707 struct iovec *out_cursor,
708 struct iovec *in_cursor, uint8_t class,
709 uint8_t cmd, const struct iovec *data_sg,
710 size_t data_num)
712 const struct virtio_net_ctrl_hdr ctrl = {
713 .class = class,
714 .cmd = cmd,
716 size_t data_size = iov_size(data_sg, data_num), cmd_size;
717 struct iovec out, in;
718 ssize_t r;
719 unsigned dummy_cursor_iov_cnt;
720 VhostShadowVirtqueue *svq = g_ptr_array_index(s->vhost_vdpa.shadow_vqs, 0);
722 assert(data_size < vhost_vdpa_net_cvq_cmd_page_len() - sizeof(ctrl));
723 cmd_size = sizeof(ctrl) + data_size;
724 trace_vhost_vdpa_net_load_cmd(s, class, cmd, data_num, data_size);
725 if (vhost_svq_available_slots(svq) < 2 ||
726 iov_size(out_cursor, 1) < cmd_size) {
728 * It is time to flush all pending control commands if SVQ is full
729 * or control commands shadow buffers are full.
731 * We can poll here since we've had BQL from the time
732 * we sent the descriptor.
734 r = vhost_vdpa_net_svq_flush(s, in_cursor->iov_base -
735 (void *)s->status);
736 if (unlikely(r < 0)) {
737 return r;
740 vhost_vdpa_net_load_cursor_reset(s, out_cursor, in_cursor);
743 /* pack the CVQ command header */
744 iov_from_buf(out_cursor, 1, 0, &ctrl, sizeof(ctrl));
745 /* pack the CVQ command command-specific-data */
746 iov_to_buf(data_sg, data_num, 0,
747 out_cursor->iov_base + sizeof(ctrl), data_size);
749 /* extract the required buffer from the cursor for output */
750 iov_copy(&out, 1, out_cursor, 1, 0, cmd_size);
751 /* extract the required buffer from the cursor for input */
752 iov_copy(&in, 1, in_cursor, 1, 0, sizeof(*s->status));
754 r = vhost_vdpa_net_cvq_add(s, &out, 1, &in, 1);
755 if (unlikely(r < 0)) {
756 trace_vhost_vdpa_net_load_cmd_retval(s, class, cmd, r);
757 return r;
760 /* iterate the cursors */
761 dummy_cursor_iov_cnt = 1;
762 iov_discard_front(&out_cursor, &dummy_cursor_iov_cnt, cmd_size);
763 dummy_cursor_iov_cnt = 1;
764 iov_discard_front(&in_cursor, &dummy_cursor_iov_cnt, sizeof(*s->status));
766 return 0;
769 static int vhost_vdpa_net_load_mac(VhostVDPAState *s, const VirtIONet *n,
770 struct iovec *out_cursor,
771 struct iovec *in_cursor)
773 if (virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_MAC_ADDR)) {
774 const struct iovec data = {
775 .iov_base = (void *)n->mac,
776 .iov_len = sizeof(n->mac),
778 ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
779 VIRTIO_NET_CTRL_MAC,
780 VIRTIO_NET_CTRL_MAC_ADDR_SET,
781 &data, 1);
782 if (unlikely(r < 0)) {
783 return r;
788 * According to VirtIO standard, "The device MUST have an
789 * empty MAC filtering table on reset.".
791 * Therefore, there is no need to send this CVQ command if the
792 * driver also sets an empty MAC filter table, which aligns with
793 * the device's defaults.
795 * Note that the device's defaults can mismatch the driver's
796 * configuration only at live migration.
798 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX) ||
799 n->mac_table.in_use == 0) {
800 return 0;
803 uint32_t uni_entries = n->mac_table.first_multi,
804 uni_macs_size = uni_entries * ETH_ALEN,
805 mul_entries = n->mac_table.in_use - uni_entries,
806 mul_macs_size = mul_entries * ETH_ALEN;
807 struct virtio_net_ctrl_mac uni = {
808 .entries = cpu_to_le32(uni_entries),
810 struct virtio_net_ctrl_mac mul = {
811 .entries = cpu_to_le32(mul_entries),
813 const struct iovec data[] = {
815 .iov_base = &uni,
816 .iov_len = sizeof(uni),
817 }, {
818 .iov_base = n->mac_table.macs,
819 .iov_len = uni_macs_size,
820 }, {
821 .iov_base = &mul,
822 .iov_len = sizeof(mul),
823 }, {
824 .iov_base = &n->mac_table.macs[uni_macs_size],
825 .iov_len = mul_macs_size,
828 ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
829 VIRTIO_NET_CTRL_MAC,
830 VIRTIO_NET_CTRL_MAC_TABLE_SET,
831 data, ARRAY_SIZE(data));
832 if (unlikely(r < 0)) {
833 return r;
836 return 0;
839 static int vhost_vdpa_net_load_rss(VhostVDPAState *s, const VirtIONet *n,
840 struct iovec *out_cursor,
841 struct iovec *in_cursor, bool do_rss)
843 struct virtio_net_rss_config cfg = {};
844 ssize_t r;
845 g_autofree uint16_t *table = NULL;
848 * According to VirtIO standard, "Initially the device has all hash
849 * types disabled and reports only VIRTIO_NET_HASH_REPORT_NONE.".
851 * Therefore, there is no need to send this CVQ command if the
852 * driver disables the all hash types, which aligns with
853 * the device's defaults.
855 * Note that the device's defaults can mismatch the driver's
856 * configuration only at live migration.
858 if (!n->rss_data.enabled ||
859 n->rss_data.hash_types == VIRTIO_NET_HASH_REPORT_NONE) {
860 return 0;
863 table = g_malloc_n(n->rss_data.indirections_len,
864 sizeof(n->rss_data.indirections_table[0]));
865 cfg.hash_types = cpu_to_le32(n->rss_data.hash_types);
867 if (do_rss) {
869 * According to VirtIO standard, "Number of entries in indirection_table
870 * is (indirection_table_mask + 1)".
872 cfg.indirection_table_mask = cpu_to_le16(n->rss_data.indirections_len -
874 cfg.unclassified_queue = cpu_to_le16(n->rss_data.default_queue);
875 for (int i = 0; i < n->rss_data.indirections_len; ++i) {
876 table[i] = cpu_to_le16(n->rss_data.indirections_table[i]);
878 cfg.max_tx_vq = cpu_to_le16(n->curr_queue_pairs);
879 } else {
881 * According to VirtIO standard, "Field reserved MUST contain zeroes.
882 * It is defined to make the structure to match the layout of
883 * virtio_net_rss_config structure, defined in 5.1.6.5.7.".
885 * Therefore, we need to zero the fields in
886 * struct virtio_net_rss_config, which corresponds to the
887 * `reserved` field in struct virtio_net_hash_config.
889 * Note that all other fields are zeroed at their definitions,
890 * except for the `indirection_table` field, where the actual data
891 * is stored in the `table` variable to ensure compatibility
892 * with RSS case. Therefore, we need to zero the `table` variable here.
894 table[0] = 0;
898 * Considering that virtio_net_handle_rss() currently does not restore
899 * the hash key length parsed from the CVQ command sent from the guest
900 * into n->rss_data and uses the maximum key length in other code, so
901 * we also employ the maximum key length here.
903 cfg.hash_key_length = sizeof(n->rss_data.key);
905 const struct iovec data[] = {
907 .iov_base = &cfg,
908 .iov_len = offsetof(struct virtio_net_rss_config,
909 indirection_table),
910 }, {
911 .iov_base = table,
912 .iov_len = n->rss_data.indirections_len *
913 sizeof(n->rss_data.indirections_table[0]),
914 }, {
915 .iov_base = &cfg.max_tx_vq,
916 .iov_len = offsetof(struct virtio_net_rss_config, hash_key_data) -
917 offsetof(struct virtio_net_rss_config, max_tx_vq),
918 }, {
919 .iov_base = (void *)n->rss_data.key,
920 .iov_len = sizeof(n->rss_data.key),
924 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
925 VIRTIO_NET_CTRL_MQ,
926 do_rss ? VIRTIO_NET_CTRL_MQ_RSS_CONFIG :
927 VIRTIO_NET_CTRL_MQ_HASH_CONFIG,
928 data, ARRAY_SIZE(data));
929 if (unlikely(r < 0)) {
930 return r;
933 return 0;
936 static int vhost_vdpa_net_load_mq(VhostVDPAState *s,
937 const VirtIONet *n,
938 struct iovec *out_cursor,
939 struct iovec *in_cursor)
941 struct virtio_net_ctrl_mq mq;
942 ssize_t r;
944 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_MQ)) {
945 return 0;
948 trace_vhost_vdpa_net_load_mq(s, n->curr_queue_pairs);
950 mq.virtqueue_pairs = cpu_to_le16(n->curr_queue_pairs);
951 const struct iovec data = {
952 .iov_base = &mq,
953 .iov_len = sizeof(mq),
955 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
956 VIRTIO_NET_CTRL_MQ,
957 VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET,
958 &data, 1);
959 if (unlikely(r < 0)) {
960 return r;
963 if (virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_RSS)) {
964 /* load the receive-side scaling state */
965 r = vhost_vdpa_net_load_rss(s, n, out_cursor, in_cursor, true);
966 if (unlikely(r < 0)) {
967 return r;
969 } else if (virtio_vdev_has_feature(&n->parent_obj,
970 VIRTIO_NET_F_HASH_REPORT)) {
971 /* load the hash calculation state */
972 r = vhost_vdpa_net_load_rss(s, n, out_cursor, in_cursor, false);
973 if (unlikely(r < 0)) {
974 return r;
978 return 0;
981 static int vhost_vdpa_net_load_offloads(VhostVDPAState *s,
982 const VirtIONet *n,
983 struct iovec *out_cursor,
984 struct iovec *in_cursor)
986 uint64_t offloads;
987 ssize_t r;
989 if (!virtio_vdev_has_feature(&n->parent_obj,
990 VIRTIO_NET_F_CTRL_GUEST_OFFLOADS)) {
991 return 0;
994 if (n->curr_guest_offloads == virtio_net_supported_guest_offloads(n)) {
996 * According to VirtIO standard, "Upon feature negotiation
997 * corresponding offload gets enabled to preserve
998 * backward compatibility.".
1000 * Therefore, there is no need to send this CVQ command if the
1001 * driver also enables all supported offloads, which aligns with
1002 * the device's defaults.
1004 * Note that the device's defaults can mismatch the driver's
1005 * configuration only at live migration.
1007 return 0;
1010 offloads = cpu_to_le64(n->curr_guest_offloads);
1011 const struct iovec data = {
1012 .iov_base = &offloads,
1013 .iov_len = sizeof(offloads),
1015 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
1016 VIRTIO_NET_CTRL_GUEST_OFFLOADS,
1017 VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET,
1018 &data, 1);
1019 if (unlikely(r < 0)) {
1020 return r;
1023 return 0;
1026 static int vhost_vdpa_net_load_rx_mode(VhostVDPAState *s,
1027 struct iovec *out_cursor,
1028 struct iovec *in_cursor,
1029 uint8_t cmd,
1030 uint8_t on)
1032 const struct iovec data = {
1033 .iov_base = &on,
1034 .iov_len = sizeof(on),
1036 ssize_t r;
1038 r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
1039 VIRTIO_NET_CTRL_RX, cmd, &data, 1);
1040 if (unlikely(r < 0)) {
1041 return r;
1044 return 0;
1047 static int vhost_vdpa_net_load_rx(VhostVDPAState *s,
1048 const VirtIONet *n,
1049 struct iovec *out_cursor,
1050 struct iovec *in_cursor)
1052 ssize_t r;
1054 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX)) {
1055 return 0;
1059 * According to virtio_net_reset(), device turns promiscuous mode
1060 * on by default.
1062 * Additionally, according to VirtIO standard, "Since there are
1063 * no guarantees, it can use a hash filter or silently switch to
1064 * allmulti or promiscuous mode if it is given too many addresses.".
1065 * QEMU marks `n->mac_table.uni_overflow` if guest sets too many
1066 * non-multicast MAC addresses, indicating that promiscuous mode
1067 * should be enabled.
1069 * Therefore, QEMU should only send this CVQ command if the
1070 * `n->mac_table.uni_overflow` is not marked and `n->promisc` is off,
1071 * which sets promiscuous mode on, different from the device's defaults.
1073 * Note that the device's defaults can mismatch the driver's
1074 * configuration only at live migration.
1076 if (!n->mac_table.uni_overflow && !n->promisc) {
1077 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1078 VIRTIO_NET_CTRL_RX_PROMISC, 0);
1079 if (unlikely(r < 0)) {
1080 return r;
1085 * According to virtio_net_reset(), device turns all-multicast mode
1086 * off by default.
1088 * According to VirtIO standard, "Since there are no guarantees,
1089 * it can use a hash filter or silently switch to allmulti or
1090 * promiscuous mode if it is given too many addresses.". QEMU marks
1091 * `n->mac_table.multi_overflow` if guest sets too many
1092 * non-multicast MAC addresses.
1094 * Therefore, QEMU should only send this CVQ command if the
1095 * `n->mac_table.multi_overflow` is marked or `n->allmulti` is on,
1096 * which sets all-multicast mode on, different from the device's defaults.
1098 * Note that the device's defaults can mismatch the driver's
1099 * configuration only at live migration.
1101 if (n->mac_table.multi_overflow || n->allmulti) {
1102 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1103 VIRTIO_NET_CTRL_RX_ALLMULTI, 1);
1104 if (unlikely(r < 0)) {
1105 return r;
1109 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_RX_EXTRA)) {
1110 return 0;
1114 * According to virtio_net_reset(), device turns all-unicast mode
1115 * off by default.
1117 * Therefore, QEMU should only send this CVQ command if the driver
1118 * sets all-unicast mode on, different from the device's defaults.
1120 * Note that the device's defaults can mismatch the driver's
1121 * configuration only at live migration.
1123 if (n->alluni) {
1124 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1125 VIRTIO_NET_CTRL_RX_ALLUNI, 1);
1126 if (r < 0) {
1127 return r;
1132 * According to virtio_net_reset(), device turns non-multicast mode
1133 * off by default.
1135 * Therefore, QEMU should only send this CVQ command if the driver
1136 * sets non-multicast mode on, different from the device's defaults.
1138 * Note that the device's defaults can mismatch the driver's
1139 * configuration only at live migration.
1141 if (n->nomulti) {
1142 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1143 VIRTIO_NET_CTRL_RX_NOMULTI, 1);
1144 if (r < 0) {
1145 return r;
1150 * According to virtio_net_reset(), device turns non-unicast mode
1151 * off by default.
1153 * Therefore, QEMU should only send this CVQ command if the driver
1154 * sets non-unicast mode on, different from the device's defaults.
1156 * Note that the device's defaults can mismatch the driver's
1157 * configuration only at live migration.
1159 if (n->nouni) {
1160 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1161 VIRTIO_NET_CTRL_RX_NOUNI, 1);
1162 if (r < 0) {
1163 return r;
1168 * According to virtio_net_reset(), device turns non-broadcast mode
1169 * off by default.
1171 * Therefore, QEMU should only send this CVQ command if the driver
1172 * sets non-broadcast mode on, different from the device's defaults.
1174 * Note that the device's defaults can mismatch the driver's
1175 * configuration only at live migration.
1177 if (n->nobcast) {
1178 r = vhost_vdpa_net_load_rx_mode(s, out_cursor, in_cursor,
1179 VIRTIO_NET_CTRL_RX_NOBCAST, 1);
1180 if (r < 0) {
1181 return r;
1185 return 0;
1188 static int vhost_vdpa_net_load_single_vlan(VhostVDPAState *s,
1189 const VirtIONet *n,
1190 struct iovec *out_cursor,
1191 struct iovec *in_cursor,
1192 uint16_t vid)
1194 const struct iovec data = {
1195 .iov_base = &vid,
1196 .iov_len = sizeof(vid),
1198 ssize_t r = vhost_vdpa_net_load_cmd(s, out_cursor, in_cursor,
1199 VIRTIO_NET_CTRL_VLAN,
1200 VIRTIO_NET_CTRL_VLAN_ADD,
1201 &data, 1);
1202 if (unlikely(r < 0)) {
1203 return r;
1206 return 0;
1209 static int vhost_vdpa_net_load_vlan(VhostVDPAState *s,
1210 const VirtIONet *n,
1211 struct iovec *out_cursor,
1212 struct iovec *in_cursor)
1214 int r;
1216 if (!virtio_vdev_has_feature(&n->parent_obj, VIRTIO_NET_F_CTRL_VLAN)) {
1217 return 0;
1220 for (int i = 0; i < MAX_VLAN >> 5; i++) {
1221 for (int j = 0; n->vlans[i] && j <= 0x1f; j++) {
1222 if (n->vlans[i] & (1U << j)) {
1223 r = vhost_vdpa_net_load_single_vlan(s, n, out_cursor,
1224 in_cursor, (i << 5) + j);
1225 if (unlikely(r != 0)) {
1226 return r;
1232 return 0;
1235 static int vhost_vdpa_net_cvq_load(NetClientState *nc)
1237 VhostVDPAState *s = DO_UPCAST(VhostVDPAState, nc, nc);
1238 struct vhost_vdpa *v = &s->vhost_vdpa;
1239 const VirtIONet *n;
1240 int r;
1241 struct iovec out_cursor, in_cursor;
1243 assert(nc->info->type == NET_CLIENT_DRIVER_VHOST_VDPA);
1245 r = vhost_vdpa_set_vring_ready(v, v->dev->vq_index);
1246 if (unlikely(r < 0)) {
1247 return r;
1250 if (v->shadow_vqs_enabled) {
1251 n = VIRTIO_NET(v->dev->vdev);
1252 vhost_vdpa_net_load_cursor_reset(s, &out_cursor, &in_cursor);
1253 r = vhost_vdpa_net_load_mac(s, n, &out_cursor, &in_cursor);
1254 if (unlikely(r < 0)) {
1255 return r;
1257 r = vhost_vdpa_net_load_mq(s, n, &out_cursor, &in_cursor);
1258 if (unlikely(r)) {
1259 return r;
1261 r = vhost_vdpa_net_load_offloads(s, n, &out_cursor, &in_cursor);
1262 if (unlikely(r)) {
1263 return r;
1265 r = vhost_vdpa_net_load_rx(s, n, &out_cursor, &in_cursor);
1266 if (unlikely(r)) {
1267 return r;
1269 r = vhost_vdpa_net_load_vlan(s, n, &out_cursor, &in_cursor);
1270 if (unlikely(r)) {
1271 return r;
1275 * We need to poll and check all pending device's used buffers.
1277 * We can poll here since we've had BQL from the time
1278 * we sent the descriptor.
1280 r = vhost_vdpa_net_svq_flush(s, in_cursor.iov_base - (void *)s->status);
1281 if (unlikely(r)) {
1282 return r;
1286 for (int i = 0; i < v->dev->vq_index; ++i) {
1287 r = vhost_vdpa_set_vring_ready(v, i);
1288 if (unlikely(r < 0)) {
1289 return r;
1293 return 0;
1296 static NetClientInfo net_vhost_vdpa_cvq_info = {
1297 .type = NET_CLIENT_DRIVER_VHOST_VDPA,
1298 .size = sizeof(VhostVDPAState),
1299 .receive = vhost_vdpa_receive,
1300 .start = vhost_vdpa_net_cvq_start,
1301 .load = vhost_vdpa_net_cvq_load,
1302 .stop = vhost_vdpa_net_cvq_stop,
1303 .cleanup = vhost_vdpa_cleanup,
1304 .has_vnet_hdr = vhost_vdpa_has_vnet_hdr,
1305 .has_ufo = vhost_vdpa_has_ufo,
1306 .check_peer_type = vhost_vdpa_check_peer_type,
1307 .set_steering_ebpf = vhost_vdpa_set_steering_ebpf,
1311 * Forward the excessive VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command to
1312 * vdpa device.
1314 * Considering that QEMU cannot send the entire filter table to the
1315 * vdpa device, it should send the VIRTIO_NET_CTRL_RX_PROMISC CVQ
1316 * command to enable promiscuous mode to receive all packets,
1317 * according to VirtIO standard, "Since there are no guarantees,
1318 * it can use a hash filter or silently switch to allmulti or
1319 * promiscuous mode if it is given too many addresses.".
1321 * Since QEMU ignores MAC addresses beyond `MAC_TABLE_ENTRIES` and
1322 * marks `n->mac_table.x_overflow` accordingly, it should have
1323 * the same effect on the device model to receive
1324 * (`MAC_TABLE_ENTRIES` + 1) or more non-multicast MAC addresses.
1325 * The same applies to multicast MAC addresses.
1327 * Therefore, QEMU can provide the device model with a fake
1328 * VIRTIO_NET_CTRL_MAC_TABLE_SET command with (`MAC_TABLE_ENTRIES` + 1)
1329 * non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1) multicast
1330 * MAC addresses. This ensures that the device model marks
1331 * `n->mac_table.uni_overflow` and `n->mac_table.multi_overflow`,
1332 * allowing all packets to be received, which aligns with the
1333 * state of the vdpa device.
1335 static int vhost_vdpa_net_excessive_mac_filter_cvq_add(VhostVDPAState *s,
1336 VirtQueueElement *elem,
1337 struct iovec *out,
1338 const struct iovec *in)
1340 struct virtio_net_ctrl_mac mac_data, *mac_ptr;
1341 struct virtio_net_ctrl_hdr *hdr_ptr;
1342 uint32_t cursor;
1343 ssize_t r;
1344 uint8_t on = 1;
1346 /* parse the non-multicast MAC address entries from CVQ command */
1347 cursor = sizeof(*hdr_ptr);
1348 r = iov_to_buf(elem->out_sg, elem->out_num, cursor,
1349 &mac_data, sizeof(mac_data));
1350 if (unlikely(r != sizeof(mac_data))) {
1352 * If the CVQ command is invalid, we should simulate the vdpa device
1353 * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1355 *s->status = VIRTIO_NET_ERR;
1356 return sizeof(*s->status);
1358 cursor += sizeof(mac_data) + le32_to_cpu(mac_data.entries) * ETH_ALEN;
1360 /* parse the multicast MAC address entries from CVQ command */
1361 r = iov_to_buf(elem->out_sg, elem->out_num, cursor,
1362 &mac_data, sizeof(mac_data));
1363 if (r != sizeof(mac_data)) {
1365 * If the CVQ command is invalid, we should simulate the vdpa device
1366 * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1368 *s->status = VIRTIO_NET_ERR;
1369 return sizeof(*s->status);
1371 cursor += sizeof(mac_data) + le32_to_cpu(mac_data.entries) * ETH_ALEN;
1373 /* validate the CVQ command */
1374 if (iov_size(elem->out_sg, elem->out_num) != cursor) {
1376 * If the CVQ command is invalid, we should simulate the vdpa device
1377 * to reject the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1379 *s->status = VIRTIO_NET_ERR;
1380 return sizeof(*s->status);
1384 * According to VirtIO standard, "Since there are no guarantees,
1385 * it can use a hash filter or silently switch to allmulti or
1386 * promiscuous mode if it is given too many addresses.".
1388 * Therefore, considering that QEMU is unable to send the entire
1389 * filter table to the vdpa device, it should send the
1390 * VIRTIO_NET_CTRL_RX_PROMISC CVQ command to enable promiscuous mode
1392 hdr_ptr = out->iov_base;
1393 out->iov_len = sizeof(*hdr_ptr) + sizeof(on);
1395 hdr_ptr->class = VIRTIO_NET_CTRL_RX;
1396 hdr_ptr->cmd = VIRTIO_NET_CTRL_RX_PROMISC;
1397 iov_from_buf(out, 1, sizeof(*hdr_ptr), &on, sizeof(on));
1398 r = vhost_vdpa_net_cvq_add(s, out, 1, in, 1);
1399 if (unlikely(r < 0)) {
1400 return r;
1404 * We can poll here since we've had BQL from the time
1405 * we sent the descriptor.
1407 r = vhost_vdpa_net_svq_poll(s, 1);
1408 if (unlikely(r < sizeof(*s->status))) {
1409 return r;
1411 if (*s->status != VIRTIO_NET_OK) {
1412 return sizeof(*s->status);
1416 * QEMU should also send a fake VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ
1417 * command to the device model, including (`MAC_TABLE_ENTRIES` + 1)
1418 * non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1)
1419 * multicast MAC addresses.
1421 * By doing so, the device model can mark `n->mac_table.uni_overflow`
1422 * and `n->mac_table.multi_overflow`, enabling all packets to be
1423 * received, which aligns with the state of the vdpa device.
1425 cursor = 0;
1426 uint32_t fake_uni_entries = MAC_TABLE_ENTRIES + 1,
1427 fake_mul_entries = MAC_TABLE_ENTRIES + 1,
1428 fake_cvq_size = sizeof(struct virtio_net_ctrl_hdr) +
1429 sizeof(mac_data) + fake_uni_entries * ETH_ALEN +
1430 sizeof(mac_data) + fake_mul_entries * ETH_ALEN;
1432 assert(fake_cvq_size < vhost_vdpa_net_cvq_cmd_page_len());
1433 out->iov_len = fake_cvq_size;
1435 /* pack the header for fake CVQ command */
1436 hdr_ptr = out->iov_base + cursor;
1437 hdr_ptr->class = VIRTIO_NET_CTRL_MAC;
1438 hdr_ptr->cmd = VIRTIO_NET_CTRL_MAC_TABLE_SET;
1439 cursor += sizeof(*hdr_ptr);
1442 * Pack the non-multicast MAC addresses part for fake CVQ command.
1444 * According to virtio_net_handle_mac(), QEMU doesn't verify the MAC
1445 * addresses provided in CVQ command. Therefore, only the entries
1446 * field need to be prepared in the CVQ command.
1448 mac_ptr = out->iov_base + cursor;
1449 mac_ptr->entries = cpu_to_le32(fake_uni_entries);
1450 cursor += sizeof(*mac_ptr) + fake_uni_entries * ETH_ALEN;
1453 * Pack the multicast MAC addresses part for fake CVQ command.
1455 * According to virtio_net_handle_mac(), QEMU doesn't verify the MAC
1456 * addresses provided in CVQ command. Therefore, only the entries
1457 * field need to be prepared in the CVQ command.
1459 mac_ptr = out->iov_base + cursor;
1460 mac_ptr->entries = cpu_to_le32(fake_mul_entries);
1463 * Simulating QEMU poll a vdpa device used buffer
1464 * for VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command
1466 return sizeof(*s->status);
1470 * Validate and copy control virtqueue commands.
1472 * Following QEMU guidelines, we offer a copy of the buffers to the device to
1473 * prevent TOCTOU bugs.
1475 static int vhost_vdpa_net_handle_ctrl_avail(VhostShadowVirtqueue *svq,
1476 VirtQueueElement *elem,
1477 void *opaque)
1479 VhostVDPAState *s = opaque;
1480 size_t in_len;
1481 const struct virtio_net_ctrl_hdr *ctrl;
1482 virtio_net_ctrl_ack status = VIRTIO_NET_ERR;
1483 /* Out buffer sent to both the vdpa device and the device model */
1484 struct iovec out = {
1485 .iov_base = s->cvq_cmd_out_buffer,
1487 /* in buffer used for device model */
1488 const struct iovec model_in = {
1489 .iov_base = &status,
1490 .iov_len = sizeof(status),
1492 /* in buffer used for vdpa device */
1493 const struct iovec vdpa_in = {
1494 .iov_base = s->status,
1495 .iov_len = sizeof(*s->status),
1497 ssize_t dev_written = -EINVAL;
1499 out.iov_len = iov_to_buf(elem->out_sg, elem->out_num, 0,
1500 s->cvq_cmd_out_buffer,
1501 vhost_vdpa_net_cvq_cmd_page_len());
1503 ctrl = s->cvq_cmd_out_buffer;
1504 if (ctrl->class == VIRTIO_NET_CTRL_ANNOUNCE) {
1506 * Guest announce capability is emulated by qemu, so don't forward to
1507 * the device.
1509 dev_written = sizeof(status);
1510 *s->status = VIRTIO_NET_OK;
1511 } else if (unlikely(ctrl->class == VIRTIO_NET_CTRL_MAC &&
1512 ctrl->cmd == VIRTIO_NET_CTRL_MAC_TABLE_SET &&
1513 iov_size(elem->out_sg, elem->out_num) > out.iov_len)) {
1515 * Due to the size limitation of the out buffer sent to the vdpa device,
1516 * which is determined by vhost_vdpa_net_cvq_cmd_page_len(), excessive
1517 * MAC addresses set by the driver for the filter table can cause
1518 * truncation of the CVQ command in QEMU. As a result, the vdpa device
1519 * rejects the flawed CVQ command.
1521 * Therefore, QEMU must handle this situation instead of sending
1522 * the CVQ command directly.
1524 dev_written = vhost_vdpa_net_excessive_mac_filter_cvq_add(s, elem,
1525 &out, &vdpa_in);
1526 if (unlikely(dev_written < 0)) {
1527 goto out;
1529 } else {
1530 ssize_t r;
1531 r = vhost_vdpa_net_cvq_add(s, &out, 1, &vdpa_in, 1);
1532 if (unlikely(r < 0)) {
1533 dev_written = r;
1534 goto out;
1538 * We can poll here since we've had BQL from the time
1539 * we sent the descriptor.
1541 dev_written = vhost_vdpa_net_svq_poll(s, 1);
1544 if (unlikely(dev_written < sizeof(status))) {
1545 error_report("Insufficient written data (%zu)", dev_written);
1546 goto out;
1549 if (*s->status != VIRTIO_NET_OK) {
1550 goto out;
1553 status = VIRTIO_NET_ERR;
1554 virtio_net_handle_ctrl_iov(svq->vdev, &model_in, 1, &out, 1);
1555 if (status != VIRTIO_NET_OK) {
1556 error_report("Bad CVQ processing in model");
1559 out:
1560 in_len = iov_from_buf(elem->in_sg, elem->in_num, 0, &status,
1561 sizeof(status));
1562 if (unlikely(in_len < sizeof(status))) {
1563 error_report("Bad device CVQ written length");
1565 vhost_svq_push_elem(svq, elem, MIN(in_len, sizeof(status)));
1567 * `elem` belongs to vhost_vdpa_net_handle_ctrl_avail() only when
1568 * the function successfully forwards the CVQ command, indicated
1569 * by a non-negative value of `dev_written`. Otherwise, it still
1570 * belongs to SVQ.
1571 * This function should only free the `elem` when it owns.
1573 if (dev_written >= 0) {
1574 g_free(elem);
1576 return dev_written < 0 ? dev_written : 0;
1579 static const VhostShadowVirtqueueOps vhost_vdpa_net_svq_ops = {
1580 .avail_handler = vhost_vdpa_net_handle_ctrl_avail,
1584 * Probe if CVQ is isolated
1586 * @device_fd The vdpa device fd
1587 * @features Features offered by the device.
1588 * @cvq_index The control vq pair index
1590 * Returns <0 in case of failure, 0 if false and 1 if true.
1592 static int vhost_vdpa_probe_cvq_isolation(int device_fd, uint64_t features,
1593 int cvq_index, Error **errp)
1595 ERRP_GUARD();
1596 uint64_t backend_features;
1597 int64_t cvq_group;
1598 uint8_t status = VIRTIO_CONFIG_S_ACKNOWLEDGE |
1599 VIRTIO_CONFIG_S_DRIVER;
1600 int r;
1602 r = ioctl(device_fd, VHOST_GET_BACKEND_FEATURES, &backend_features);
1603 if (unlikely(r < 0)) {
1604 error_setg_errno(errp, errno, "Cannot get vdpa backend_features");
1605 return r;
1608 if (!(backend_features & BIT_ULL(VHOST_BACKEND_F_IOTLB_ASID))) {
1609 return 0;
1612 r = ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status);
1613 if (unlikely(r)) {
1614 error_setg_errno(errp, -r, "Cannot set device status");
1615 goto out;
1618 r = ioctl(device_fd, VHOST_SET_FEATURES, &features);
1619 if (unlikely(r)) {
1620 error_setg_errno(errp, -r, "Cannot set features");
1621 goto out;
1624 status |= VIRTIO_CONFIG_S_FEATURES_OK;
1625 r = ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status);
1626 if (unlikely(r)) {
1627 error_setg_errno(errp, -r, "Cannot set device status");
1628 goto out;
1631 cvq_group = vhost_vdpa_get_vring_group(device_fd, cvq_index, errp);
1632 if (unlikely(cvq_group < 0)) {
1633 if (cvq_group != -ENOTSUP) {
1634 r = cvq_group;
1635 goto out;
1639 * The kernel report VHOST_BACKEND_F_IOTLB_ASID if the vdpa frontend
1640 * support ASID even if the parent driver does not. The CVQ cannot be
1641 * isolated in this case.
1643 error_free(*errp);
1644 *errp = NULL;
1645 r = 0;
1646 goto out;
1649 for (int i = 0; i < cvq_index; ++i) {
1650 int64_t group = vhost_vdpa_get_vring_group(device_fd, i, errp);
1651 if (unlikely(group < 0)) {
1652 r = group;
1653 goto out;
1656 if (group == (int64_t)cvq_group) {
1657 r = 0;
1658 goto out;
1662 r = 1;
1664 out:
1665 status = 0;
1666 ioctl(device_fd, VHOST_VDPA_SET_STATUS, &status);
1667 return r;
1670 static NetClientState *net_vhost_vdpa_init(NetClientState *peer,
1671 const char *device,
1672 const char *name,
1673 int vdpa_device_fd,
1674 int queue_pair_index,
1675 int nvqs,
1676 bool is_datapath,
1677 bool svq,
1678 struct vhost_vdpa_iova_range iova_range,
1679 uint64_t features,
1680 VhostVDPAShared *shared,
1681 Error **errp)
1683 NetClientState *nc = NULL;
1684 VhostVDPAState *s;
1685 int ret = 0;
1686 assert(name);
1687 int cvq_isolated = 0;
1689 if (is_datapath) {
1690 nc = qemu_new_net_client(&net_vhost_vdpa_info, peer, device,
1691 name);
1692 } else {
1693 cvq_isolated = vhost_vdpa_probe_cvq_isolation(vdpa_device_fd, features,
1694 queue_pair_index * 2,
1695 errp);
1696 if (unlikely(cvq_isolated < 0)) {
1697 return NULL;
1700 nc = qemu_new_net_control_client(&net_vhost_vdpa_cvq_info, peer,
1701 device, name);
1703 qemu_set_info_str(nc, TYPE_VHOST_VDPA);
1704 s = DO_UPCAST(VhostVDPAState, nc, nc);
1706 s->vhost_vdpa.index = queue_pair_index;
1707 s->always_svq = svq;
1708 s->migration_state.notify = NULL;
1709 s->vhost_vdpa.shadow_vqs_enabled = svq;
1710 if (queue_pair_index == 0) {
1711 vhost_vdpa_net_valid_svq_features(features,
1712 &s->vhost_vdpa.migration_blocker);
1713 s->vhost_vdpa.shared = g_new0(VhostVDPAShared, 1);
1714 s->vhost_vdpa.shared->device_fd = vdpa_device_fd;
1715 s->vhost_vdpa.shared->iova_range = iova_range;
1716 s->vhost_vdpa.shared->shadow_data = svq;
1717 } else if (!is_datapath) {
1718 s->cvq_cmd_out_buffer = mmap(NULL, vhost_vdpa_net_cvq_cmd_page_len(),
1719 PROT_READ | PROT_WRITE,
1720 MAP_SHARED | MAP_ANONYMOUS, -1, 0);
1721 s->status = mmap(NULL, vhost_vdpa_net_cvq_cmd_page_len(),
1722 PROT_READ | PROT_WRITE, MAP_SHARED | MAP_ANONYMOUS,
1723 -1, 0);
1725 s->vhost_vdpa.shadow_vq_ops = &vhost_vdpa_net_svq_ops;
1726 s->vhost_vdpa.shadow_vq_ops_opaque = s;
1727 s->cvq_isolated = cvq_isolated;
1729 if (queue_pair_index != 0) {
1730 s->vhost_vdpa.shared = shared;
1733 ret = vhost_vdpa_add(nc, (void *)&s->vhost_vdpa, queue_pair_index, nvqs);
1734 if (ret) {
1735 qemu_del_net_client(nc);
1736 return NULL;
1739 return nc;
1742 static int vhost_vdpa_get_features(int fd, uint64_t *features, Error **errp)
1744 int ret = ioctl(fd, VHOST_GET_FEATURES, features);
1745 if (unlikely(ret < 0)) {
1746 error_setg_errno(errp, errno,
1747 "Fail to query features from vhost-vDPA device");
1749 return ret;
1752 static int vhost_vdpa_get_max_queue_pairs(int fd, uint64_t features,
1753 int *has_cvq, Error **errp)
1755 unsigned long config_size = offsetof(struct vhost_vdpa_config, buf);
1756 g_autofree struct vhost_vdpa_config *config = NULL;
1757 __virtio16 *max_queue_pairs;
1758 int ret;
1760 if (features & (1 << VIRTIO_NET_F_CTRL_VQ)) {
1761 *has_cvq = 1;
1762 } else {
1763 *has_cvq = 0;
1766 if (features & (1 << VIRTIO_NET_F_MQ)) {
1767 config = g_malloc0(config_size + sizeof(*max_queue_pairs));
1768 config->off = offsetof(struct virtio_net_config, max_virtqueue_pairs);
1769 config->len = sizeof(*max_queue_pairs);
1771 ret = ioctl(fd, VHOST_VDPA_GET_CONFIG, config);
1772 if (ret) {
1773 error_setg(errp, "Fail to get config from vhost-vDPA device");
1774 return -ret;
1777 max_queue_pairs = (__virtio16 *)&config->buf;
1779 return lduw_le_p(max_queue_pairs);
1782 return 1;
1785 int net_init_vhost_vdpa(const Netdev *netdev, const char *name,
1786 NetClientState *peer, Error **errp)
1788 ERRP_GUARD();
1789 const NetdevVhostVDPAOptions *opts;
1790 uint64_t features;
1791 int vdpa_device_fd;
1792 g_autofree NetClientState **ncs = NULL;
1793 struct vhost_vdpa_iova_range iova_range;
1794 NetClientState *nc;
1795 int queue_pairs, r, i = 0, has_cvq = 0;
1797 assert(netdev->type == NET_CLIENT_DRIVER_VHOST_VDPA);
1798 opts = &netdev->u.vhost_vdpa;
1799 if (!opts->vhostdev && !opts->vhostfd) {
1800 error_setg(errp,
1801 "vhost-vdpa: neither vhostdev= nor vhostfd= was specified");
1802 return -1;
1805 if (opts->vhostdev && opts->vhostfd) {
1806 error_setg(errp,
1807 "vhost-vdpa: vhostdev= and vhostfd= are mutually exclusive");
1808 return -1;
1811 if (opts->vhostdev) {
1812 vdpa_device_fd = qemu_open(opts->vhostdev, O_RDWR, errp);
1813 if (vdpa_device_fd == -1) {
1814 return -errno;
1816 } else {
1817 /* has_vhostfd */
1818 vdpa_device_fd = monitor_fd_param(monitor_cur(), opts->vhostfd, errp);
1819 if (vdpa_device_fd == -1) {
1820 error_prepend(errp, "vhost-vdpa: unable to parse vhostfd: ");
1821 return -1;
1825 r = vhost_vdpa_get_features(vdpa_device_fd, &features, errp);
1826 if (unlikely(r < 0)) {
1827 goto err;
1830 queue_pairs = vhost_vdpa_get_max_queue_pairs(vdpa_device_fd, features,
1831 &has_cvq, errp);
1832 if (queue_pairs < 0) {
1833 qemu_close(vdpa_device_fd);
1834 return queue_pairs;
1837 r = vhost_vdpa_get_iova_range(vdpa_device_fd, &iova_range);
1838 if (unlikely(r < 0)) {
1839 error_setg(errp, "vhost-vdpa: get iova range failed: %s",
1840 strerror(-r));
1841 goto err;
1844 if (opts->x_svq && !vhost_vdpa_net_valid_svq_features(features, errp)) {
1845 goto err;
1848 ncs = g_malloc0(sizeof(*ncs) * queue_pairs);
1850 for (i = 0; i < queue_pairs; i++) {
1851 VhostVDPAShared *shared = NULL;
1853 if (i) {
1854 shared = DO_UPCAST(VhostVDPAState, nc, ncs[0])->vhost_vdpa.shared;
1856 ncs[i] = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
1857 vdpa_device_fd, i, 2, true, opts->x_svq,
1858 iova_range, features, shared, errp);
1859 if (!ncs[i])
1860 goto err;
1863 if (has_cvq) {
1864 VhostVDPAState *s0 = DO_UPCAST(VhostVDPAState, nc, ncs[0]);
1865 VhostVDPAShared *shared = s0->vhost_vdpa.shared;
1867 nc = net_vhost_vdpa_init(peer, TYPE_VHOST_VDPA, name,
1868 vdpa_device_fd, i, 1, false,
1869 opts->x_svq, iova_range, features, shared,
1870 errp);
1871 if (!nc)
1872 goto err;
1875 return 0;
1877 err:
1878 if (i) {
1879 for (i--; i >= 0; i--) {
1880 qemu_del_net_client(ncs[i]);
1884 qemu_close(vdpa_device_fd);
1886 return -1;