linux-user: Add an api to print enumareted argument values with strace
[qemu/ar7.git] / hw / usb / tusb6010.c
blob27eb28d3e482bbc6f3d5af9c03411d4e5893d0f0
1 /*
2 * Texas Instruments TUSB6010 emulation.
3 * Based on reverse-engineering of a linux driver.
5 * Copyright (C) 2008 Nokia Corporation
6 * Written by Andrzej Zaborowski <andrew@openedhand.com>
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 or
11 * (at your option) version 3 of the License.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License along
19 * with this program; if not, see <http://www.gnu.org/licenses/>.
22 #include "qemu/osdep.h"
23 #include "qemu/module.h"
24 #include "qemu/timer.h"
25 #include "hw/usb.h"
26 #include "hw/usb/hcd-musb.h"
27 #include "hw/arm/omap.h"
28 #include "hw/hw.h"
29 #include "hw/irq.h"
30 #include "hw/sysbus.h"
32 #define TYPE_TUSB6010 "tusb6010"
33 #define TUSB(obj) OBJECT_CHECK(TUSBState, (obj), TYPE_TUSB6010)
35 typedef struct TUSBState {
36 SysBusDevice parent_obj;
38 MemoryRegion iomem[2];
39 qemu_irq irq;
40 MUSBState *musb;
41 QEMUTimer *otg_timer;
42 QEMUTimer *pwr_timer;
44 int power;
45 uint32_t scratch;
46 uint16_t test_reset;
47 uint32_t prcm_config;
48 uint32_t prcm_mngmt;
49 uint16_t otg_status;
50 uint32_t dev_config;
51 int host_mode;
52 uint32_t intr;
53 uint32_t intr_ok;
54 uint32_t mask;
55 uint32_t usbip_intr;
56 uint32_t usbip_mask;
57 uint32_t gpio_intr;
58 uint32_t gpio_mask;
59 uint32_t gpio_config;
60 uint32_t dma_intr;
61 uint32_t dma_mask;
62 uint32_t dma_map;
63 uint32_t dma_config;
64 uint32_t ep0_config;
65 uint32_t rx_config[15];
66 uint32_t tx_config[15];
67 uint32_t wkup_mask;
68 uint32_t pullup[2];
69 uint32_t control_config;
70 uint32_t otg_timer_val;
71 } TUSBState;
73 #define TUSB_DEVCLOCK 60000000 /* 60 MHz */
75 #define TUSB_VLYNQ_CTRL 0x004
77 /* Mentor Graphics OTG core registers. */
78 #define TUSB_BASE_OFFSET 0x400
80 /* FIFO registers, 32-bit. */
81 #define TUSB_FIFO_BASE 0x600
83 /* Device System & Control registers, 32-bit. */
84 #define TUSB_SYS_REG_BASE 0x800
86 #define TUSB_DEV_CONF (TUSB_SYS_REG_BASE + 0x000)
87 #define TUSB_DEV_CONF_USB_HOST_MODE (1 << 16)
88 #define TUSB_DEV_CONF_PROD_TEST_MODE (1 << 15)
89 #define TUSB_DEV_CONF_SOFT_ID (1 << 1)
90 #define TUSB_DEV_CONF_ID_SEL (1 << 0)
92 #define TUSB_PHY_OTG_CTRL_ENABLE (TUSB_SYS_REG_BASE + 0x004)
93 #define TUSB_PHY_OTG_CTRL (TUSB_SYS_REG_BASE + 0x008)
94 #define TUSB_PHY_OTG_CTRL_WRPROTECT (0xa5 << 24)
95 #define TUSB_PHY_OTG_CTRL_O_ID_PULLUP (1 << 23)
96 #define TUSB_PHY_OTG_CTRL_O_VBUS_DET_EN (1 << 19)
97 #define TUSB_PHY_OTG_CTRL_O_SESS_END_EN (1 << 18)
98 #define TUSB_PHY_OTG_CTRL_TESTM2 (1 << 17)
99 #define TUSB_PHY_OTG_CTRL_TESTM1 (1 << 16)
100 #define TUSB_PHY_OTG_CTRL_TESTM0 (1 << 15)
101 #define TUSB_PHY_OTG_CTRL_TX_DATA2 (1 << 14)
102 #define TUSB_PHY_OTG_CTRL_TX_GZ2 (1 << 13)
103 #define TUSB_PHY_OTG_CTRL_TX_ENABLE2 (1 << 12)
104 #define TUSB_PHY_OTG_CTRL_DM_PULLDOWN (1 << 11)
105 #define TUSB_PHY_OTG_CTRL_DP_PULLDOWN (1 << 10)
106 #define TUSB_PHY_OTG_CTRL_OSC_EN (1 << 9)
107 #define TUSB_PHY_OTG_CTRL_PHYREF_CLK(v) (((v) & 3) << 7)
108 #define TUSB_PHY_OTG_CTRL_PD (1 << 6)
109 #define TUSB_PHY_OTG_CTRL_PLL_ON (1 << 5)
110 #define TUSB_PHY_OTG_CTRL_EXT_RPU (1 << 4)
111 #define TUSB_PHY_OTG_CTRL_PWR_GOOD (1 << 3)
112 #define TUSB_PHY_OTG_CTRL_RESET (1 << 2)
113 #define TUSB_PHY_OTG_CTRL_SUSPENDM (1 << 1)
114 #define TUSB_PHY_OTG_CTRL_CLK_MODE (1 << 0)
116 /* OTG status register */
117 #define TUSB_DEV_OTG_STAT (TUSB_SYS_REG_BASE + 0x00c)
118 #define TUSB_DEV_OTG_STAT_PWR_CLK_GOOD (1 << 8)
119 #define TUSB_DEV_OTG_STAT_SESS_END (1 << 7)
120 #define TUSB_DEV_OTG_STAT_SESS_VALID (1 << 6)
121 #define TUSB_DEV_OTG_STAT_VBUS_VALID (1 << 5)
122 #define TUSB_DEV_OTG_STAT_VBUS_SENSE (1 << 4)
123 #define TUSB_DEV_OTG_STAT_ID_STATUS (1 << 3)
124 #define TUSB_DEV_OTG_STAT_HOST_DISCON (1 << 2)
125 #define TUSB_DEV_OTG_STAT_LINE_STATE (3 << 0)
126 #define TUSB_DEV_OTG_STAT_DP_ENABLE (1 << 1)
127 #define TUSB_DEV_OTG_STAT_DM_ENABLE (1 << 0)
129 #define TUSB_DEV_OTG_TIMER (TUSB_SYS_REG_BASE + 0x010)
130 #define TUSB_DEV_OTG_TIMER_ENABLE (1 << 31)
131 #define TUSB_DEV_OTG_TIMER_VAL(v) ((v) & 0x07ffffff)
132 #define TUSB_PRCM_REV (TUSB_SYS_REG_BASE + 0x014)
134 /* PRCM configuration register */
135 #define TUSB_PRCM_CONF (TUSB_SYS_REG_BASE + 0x018)
136 #define TUSB_PRCM_CONF_SFW_CPEN (1 << 24)
137 #define TUSB_PRCM_CONF_SYS_CLKSEL(v) (((v) & 3) << 16)
139 /* PRCM management register */
140 #define TUSB_PRCM_MNGMT (TUSB_SYS_REG_BASE + 0x01c)
141 #define TUSB_PRCM_MNGMT_SRP_FIX_TMR(v) (((v) & 0xf) << 25)
142 #define TUSB_PRCM_MNGMT_SRP_FIX_EN (1 << 24)
143 #define TUSB_PRCM_MNGMT_VBUS_VAL_TMR(v) (((v) & 0xf) << 20)
144 #define TUSB_PRCM_MNGMT_VBUS_VAL_FLT_EN (1 << 19)
145 #define TUSB_PRCM_MNGMT_DFT_CLK_DIS (1 << 18)
146 #define TUSB_PRCM_MNGMT_VLYNQ_CLK_DIS (1 << 17)
147 #define TUSB_PRCM_MNGMT_OTG_SESS_END_EN (1 << 10)
148 #define TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN (1 << 9)
149 #define TUSB_PRCM_MNGMT_OTG_ID_PULLUP (1 << 8)
150 #define TUSB_PRCM_MNGMT_15_SW_EN (1 << 4)
151 #define TUSB_PRCM_MNGMT_33_SW_EN (1 << 3)
152 #define TUSB_PRCM_MNGMT_5V_CPEN (1 << 2)
153 #define TUSB_PRCM_MNGMT_PM_IDLE (1 << 1)
154 #define TUSB_PRCM_MNGMT_DEV_IDLE (1 << 0)
156 /* Wake-up source clear and mask registers */
157 #define TUSB_PRCM_WAKEUP_SOURCE (TUSB_SYS_REG_BASE + 0x020)
158 #define TUSB_PRCM_WAKEUP_CLEAR (TUSB_SYS_REG_BASE + 0x028)
159 #define TUSB_PRCM_WAKEUP_MASK (TUSB_SYS_REG_BASE + 0x02c)
160 #define TUSB_PRCM_WAKEUP_RESERVED_BITS (0xffffe << 13)
161 #define TUSB_PRCM_WGPIO_7 (1 << 12)
162 #define TUSB_PRCM_WGPIO_6 (1 << 11)
163 #define TUSB_PRCM_WGPIO_5 (1 << 10)
164 #define TUSB_PRCM_WGPIO_4 (1 << 9)
165 #define TUSB_PRCM_WGPIO_3 (1 << 8)
166 #define TUSB_PRCM_WGPIO_2 (1 << 7)
167 #define TUSB_PRCM_WGPIO_1 (1 << 6)
168 #define TUSB_PRCM_WGPIO_0 (1 << 5)
169 #define TUSB_PRCM_WHOSTDISCON (1 << 4) /* Host disconnect */
170 #define TUSB_PRCM_WBUS (1 << 3) /* USB bus resume */
171 #define TUSB_PRCM_WNORCS (1 << 2) /* NOR chip select */
172 #define TUSB_PRCM_WVBUS (1 << 1) /* OTG PHY VBUS */
173 #define TUSB_PRCM_WID (1 << 0) /* OTG PHY ID detect */
175 #define TUSB_PULLUP_1_CTRL (TUSB_SYS_REG_BASE + 0x030)
176 #define TUSB_PULLUP_2_CTRL (TUSB_SYS_REG_BASE + 0x034)
177 #define TUSB_INT_CTRL_REV (TUSB_SYS_REG_BASE + 0x038)
178 #define TUSB_INT_CTRL_CONF (TUSB_SYS_REG_BASE + 0x03c)
179 #define TUSB_USBIP_INT_SRC (TUSB_SYS_REG_BASE + 0x040)
180 #define TUSB_USBIP_INT_SET (TUSB_SYS_REG_BASE + 0x044)
181 #define TUSB_USBIP_INT_CLEAR (TUSB_SYS_REG_BASE + 0x048)
182 #define TUSB_USBIP_INT_MASK (TUSB_SYS_REG_BASE + 0x04c)
183 #define TUSB_DMA_INT_SRC (TUSB_SYS_REG_BASE + 0x050)
184 #define TUSB_DMA_INT_SET (TUSB_SYS_REG_BASE + 0x054)
185 #define TUSB_DMA_INT_CLEAR (TUSB_SYS_REG_BASE + 0x058)
186 #define TUSB_DMA_INT_MASK (TUSB_SYS_REG_BASE + 0x05c)
187 #define TUSB_GPIO_INT_SRC (TUSB_SYS_REG_BASE + 0x060)
188 #define TUSB_GPIO_INT_SET (TUSB_SYS_REG_BASE + 0x064)
189 #define TUSB_GPIO_INT_CLEAR (TUSB_SYS_REG_BASE + 0x068)
190 #define TUSB_GPIO_INT_MASK (TUSB_SYS_REG_BASE + 0x06c)
192 /* NOR flash interrupt source registers */
193 #define TUSB_INT_SRC (TUSB_SYS_REG_BASE + 0x070)
194 #define TUSB_INT_SRC_SET (TUSB_SYS_REG_BASE + 0x074)
195 #define TUSB_INT_SRC_CLEAR (TUSB_SYS_REG_BASE + 0x078)
196 #define TUSB_INT_MASK (TUSB_SYS_REG_BASE + 0x07c)
197 #define TUSB_INT_SRC_TXRX_DMA_DONE (1 << 24)
198 #define TUSB_INT_SRC_USB_IP_CORE (1 << 17)
199 #define TUSB_INT_SRC_OTG_TIMEOUT (1 << 16)
200 #define TUSB_INT_SRC_VBUS_SENSE_CHNG (1 << 15)
201 #define TUSB_INT_SRC_ID_STATUS_CHNG (1 << 14)
202 #define TUSB_INT_SRC_DEV_WAKEUP (1 << 13)
203 #define TUSB_INT_SRC_DEV_READY (1 << 12)
204 #define TUSB_INT_SRC_USB_IP_TX (1 << 9)
205 #define TUSB_INT_SRC_USB_IP_RX (1 << 8)
206 #define TUSB_INT_SRC_USB_IP_VBUS_ERR (1 << 7)
207 #define TUSB_INT_SRC_USB_IP_VBUS_REQ (1 << 6)
208 #define TUSB_INT_SRC_USB_IP_DISCON (1 << 5)
209 #define TUSB_INT_SRC_USB_IP_CONN (1 << 4)
210 #define TUSB_INT_SRC_USB_IP_SOF (1 << 3)
211 #define TUSB_INT_SRC_USB_IP_RST_BABBLE (1 << 2)
212 #define TUSB_INT_SRC_USB_IP_RESUME (1 << 1)
213 #define TUSB_INT_SRC_USB_IP_SUSPEND (1 << 0)
215 #define TUSB_GPIO_REV (TUSB_SYS_REG_BASE + 0x080)
216 #define TUSB_GPIO_CONF (TUSB_SYS_REG_BASE + 0x084)
217 #define TUSB_DMA_CTRL_REV (TUSB_SYS_REG_BASE + 0x100)
218 #define TUSB_DMA_REQ_CONF (TUSB_SYS_REG_BASE + 0x104)
219 #define TUSB_EP0_CONF (TUSB_SYS_REG_BASE + 0x108)
220 #define TUSB_EP_IN_SIZE (TUSB_SYS_REG_BASE + 0x10c)
221 #define TUSB_DMA_EP_MAP (TUSB_SYS_REG_BASE + 0x148)
222 #define TUSB_EP_OUT_SIZE (TUSB_SYS_REG_BASE + 0x14c)
223 #define TUSB_EP_MAX_PACKET_SIZE_OFFSET (TUSB_SYS_REG_BASE + 0x188)
224 #define TUSB_SCRATCH_PAD (TUSB_SYS_REG_BASE + 0x1c4)
225 #define TUSB_WAIT_COUNT (TUSB_SYS_REG_BASE + 0x1c8)
226 #define TUSB_PROD_TEST_RESET (TUSB_SYS_REG_BASE + 0x1d8)
228 #define TUSB_DIDR1_LO (TUSB_SYS_REG_BASE + 0x1f8)
229 #define TUSB_DIDR1_HI (TUSB_SYS_REG_BASE + 0x1fc)
231 /* Device System & Control register bitfields */
232 #define TUSB_INT_CTRL_CONF_INT_RLCYC(v) (((v) & 0x7) << 18)
233 #define TUSB_INT_CTRL_CONF_INT_POLARITY (1 << 17)
234 #define TUSB_INT_CTRL_CONF_INT_MODE (1 << 16)
235 #define TUSB_GPIO_CONF_DMAREQ(v) (((v) & 0x3f) << 24)
236 #define TUSB_DMA_REQ_CONF_BURST_SIZE(v) (((v) & 3) << 26)
237 #define TUSB_DMA_REQ_CONF_DMA_RQ_EN(v) (((v) & 0x3f) << 20)
238 #define TUSB_DMA_REQ_CONF_DMA_RQ_ASR(v) (((v) & 0xf) << 16)
239 #define TUSB_EP0_CONFIG_SW_EN (1 << 8)
240 #define TUSB_EP0_CONFIG_DIR_TX (1 << 7)
241 #define TUSB_EP0_CONFIG_XFR_SIZE(v) ((v) & 0x7f)
242 #define TUSB_EP_CONFIG_SW_EN (1 << 31)
243 #define TUSB_EP_CONFIG_XFR_SIZE(v) ((v) & 0x7fffffff)
244 #define TUSB_PROD_TEST_RESET_VAL 0xa596
246 static void tusb_intr_update(TUSBState *s)
248 if (s->control_config & TUSB_INT_CTRL_CONF_INT_POLARITY)
249 qemu_set_irq(s->irq, s->intr & ~s->mask & s->intr_ok);
250 else
251 qemu_set_irq(s->irq, (!(s->intr & ~s->mask)) & s->intr_ok);
254 static void tusb_usbip_intr_update(TUSBState *s)
256 /* TX interrupt in the MUSB */
257 if (s->usbip_intr & 0x0000ffff & ~s->usbip_mask)
258 s->intr |= TUSB_INT_SRC_USB_IP_TX;
259 else
260 s->intr &= ~TUSB_INT_SRC_USB_IP_TX;
262 /* RX interrupt in the MUSB */
263 if (s->usbip_intr & 0xffff0000 & ~s->usbip_mask)
264 s->intr |= TUSB_INT_SRC_USB_IP_RX;
265 else
266 s->intr &= ~TUSB_INT_SRC_USB_IP_RX;
268 /* XXX: What about TUSB_INT_SRC_USB_IP_CORE? */
270 tusb_intr_update(s);
273 static void tusb_dma_intr_update(TUSBState *s)
275 if (s->dma_intr & ~s->dma_mask)
276 s->intr |= TUSB_INT_SRC_TXRX_DMA_DONE;
277 else
278 s->intr &= ~TUSB_INT_SRC_TXRX_DMA_DONE;
280 tusb_intr_update(s);
283 static void tusb_gpio_intr_update(TUSBState *s)
285 /* TODO: How is this signalled? */
288 static uint32_t tusb_async_readb(void *opaque, hwaddr addr)
290 TUSBState *s = (TUSBState *) opaque;
292 switch (addr & 0xfff) {
293 case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
294 return musb_read[0](s->musb, addr & 0x1ff);
296 case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
297 return musb_read[0](s->musb, 0x20 + ((addr >> 3) & 0x3c));
300 printf("%s: unknown register at %03x\n",
301 __func__, (int) (addr & 0xfff));
302 return 0;
305 static uint32_t tusb_async_readh(void *opaque, hwaddr addr)
307 TUSBState *s = (TUSBState *) opaque;
309 switch (addr & 0xfff) {
310 case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
311 return musb_read[1](s->musb, addr & 0x1ff);
313 case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
314 return musb_read[1](s->musb, 0x20 + ((addr >> 3) & 0x3c));
317 printf("%s: unknown register at %03x\n",
318 __func__, (int) (addr & 0xfff));
319 return 0;
322 static uint32_t tusb_async_readw(void *opaque, hwaddr addr)
324 TUSBState *s = (TUSBState *) opaque;
325 int offset = addr & 0xfff;
326 int epnum;
327 uint32_t ret;
329 switch (offset) {
330 case TUSB_DEV_CONF:
331 return s->dev_config;
333 case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
334 return musb_read[2](s->musb, offset & 0x1ff);
336 case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
337 return musb_read[2](s->musb, 0x20 + ((addr >> 3) & 0x3c));
339 case TUSB_PHY_OTG_CTRL_ENABLE:
340 case TUSB_PHY_OTG_CTRL:
341 return 0x00; /* TODO */
343 case TUSB_DEV_OTG_STAT:
344 ret = s->otg_status;
345 #if 0
346 if (!(s->prcm_mngmt & TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN))
347 ret &= ~TUSB_DEV_OTG_STAT_VBUS_VALID;
348 #endif
349 return ret;
350 case TUSB_DEV_OTG_TIMER:
351 return s->otg_timer_val;
353 case TUSB_PRCM_REV:
354 return 0x20;
355 case TUSB_PRCM_CONF:
356 return s->prcm_config;
357 case TUSB_PRCM_MNGMT:
358 return s->prcm_mngmt;
359 case TUSB_PRCM_WAKEUP_SOURCE:
360 case TUSB_PRCM_WAKEUP_CLEAR: /* TODO: What does this one return? */
361 return 0x00000000;
362 case TUSB_PRCM_WAKEUP_MASK:
363 return s->wkup_mask;
365 case TUSB_PULLUP_1_CTRL:
366 return s->pullup[0];
367 case TUSB_PULLUP_2_CTRL:
368 return s->pullup[1];
370 case TUSB_INT_CTRL_REV:
371 return 0x20;
372 case TUSB_INT_CTRL_CONF:
373 return s->control_config;
375 case TUSB_USBIP_INT_SRC:
376 case TUSB_USBIP_INT_SET: /* TODO: What do these two return? */
377 case TUSB_USBIP_INT_CLEAR:
378 return s->usbip_intr;
379 case TUSB_USBIP_INT_MASK:
380 return s->usbip_mask;
382 case TUSB_DMA_INT_SRC:
383 case TUSB_DMA_INT_SET: /* TODO: What do these two return? */
384 case TUSB_DMA_INT_CLEAR:
385 return s->dma_intr;
386 case TUSB_DMA_INT_MASK:
387 return s->dma_mask;
389 case TUSB_GPIO_INT_SRC: /* TODO: What do these two return? */
390 case TUSB_GPIO_INT_SET:
391 case TUSB_GPIO_INT_CLEAR:
392 return s->gpio_intr;
393 case TUSB_GPIO_INT_MASK:
394 return s->gpio_mask;
396 case TUSB_INT_SRC:
397 case TUSB_INT_SRC_SET: /* TODO: What do these two return? */
398 case TUSB_INT_SRC_CLEAR:
399 return s->intr;
400 case TUSB_INT_MASK:
401 return s->mask;
403 case TUSB_GPIO_REV:
404 return 0x30;
405 case TUSB_GPIO_CONF:
406 return s->gpio_config;
408 case TUSB_DMA_CTRL_REV:
409 return 0x30;
410 case TUSB_DMA_REQ_CONF:
411 return s->dma_config;
412 case TUSB_EP0_CONF:
413 return s->ep0_config;
414 case TUSB_EP_IN_SIZE ... (TUSB_EP_IN_SIZE + 0x3b):
415 epnum = (offset - TUSB_EP_IN_SIZE) >> 2;
416 return s->tx_config[epnum];
417 case TUSB_DMA_EP_MAP:
418 return s->dma_map;
419 case TUSB_EP_OUT_SIZE ... (TUSB_EP_OUT_SIZE + 0x3b):
420 epnum = (offset - TUSB_EP_OUT_SIZE) >> 2;
421 return s->rx_config[epnum];
422 case TUSB_EP_MAX_PACKET_SIZE_OFFSET ...
423 (TUSB_EP_MAX_PACKET_SIZE_OFFSET + 0x3b):
424 return 0x00000000; /* TODO */
425 case TUSB_WAIT_COUNT:
426 return 0x00; /* TODO */
428 case TUSB_SCRATCH_PAD:
429 return s->scratch;
431 case TUSB_PROD_TEST_RESET:
432 return s->test_reset;
434 /* DIE IDs */
435 case TUSB_DIDR1_LO:
436 return 0xa9453c59;
437 case TUSB_DIDR1_HI:
438 return 0x54059adf;
441 printf("%s: unknown register at %03x\n", __func__, offset);
442 return 0;
445 static void tusb_async_writeb(void *opaque, hwaddr addr,
446 uint32_t value)
448 TUSBState *s = (TUSBState *) opaque;
450 switch (addr & 0xfff) {
451 case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
452 musb_write[0](s->musb, addr & 0x1ff, value);
453 break;
455 case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
456 musb_write[0](s->musb, 0x20 + ((addr >> 3) & 0x3c), value);
457 break;
459 default:
460 printf("%s: unknown register at %03x\n",
461 __func__, (int) (addr & 0xfff));
462 return;
466 static void tusb_async_writeh(void *opaque, hwaddr addr,
467 uint32_t value)
469 TUSBState *s = (TUSBState *) opaque;
471 switch (addr & 0xfff) {
472 case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
473 musb_write[1](s->musb, addr & 0x1ff, value);
474 break;
476 case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
477 musb_write[1](s->musb, 0x20 + ((addr >> 3) & 0x3c), value);
478 break;
480 default:
481 printf("%s: unknown register at %03x\n",
482 __func__, (int) (addr & 0xfff));
483 return;
487 static void tusb_async_writew(void *opaque, hwaddr addr,
488 uint32_t value)
490 TUSBState *s = (TUSBState *) opaque;
491 int offset = addr & 0xfff;
492 int epnum;
494 switch (offset) {
495 case TUSB_VLYNQ_CTRL:
496 break;
498 case TUSB_BASE_OFFSET ... (TUSB_BASE_OFFSET | 0x1ff):
499 musb_write[2](s->musb, offset & 0x1ff, value);
500 break;
502 case TUSB_FIFO_BASE ... (TUSB_FIFO_BASE | 0x1ff):
503 musb_write[2](s->musb, 0x20 + ((addr >> 3) & 0x3c), value);
504 break;
506 case TUSB_DEV_CONF:
507 s->dev_config = value;
508 s->host_mode = (value & TUSB_DEV_CONF_USB_HOST_MODE);
509 if (value & TUSB_DEV_CONF_PROD_TEST_MODE)
510 hw_error("%s: Product Test mode not allowed\n", __func__);
511 break;
513 case TUSB_PHY_OTG_CTRL_ENABLE:
514 case TUSB_PHY_OTG_CTRL:
515 return; /* TODO */
516 case TUSB_DEV_OTG_TIMER:
517 s->otg_timer_val = value;
518 if (value & TUSB_DEV_OTG_TIMER_ENABLE)
519 timer_mod(s->otg_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
520 muldiv64(TUSB_DEV_OTG_TIMER_VAL(value),
521 NANOSECONDS_PER_SECOND, TUSB_DEVCLOCK));
522 else
523 timer_del(s->otg_timer);
524 break;
526 case TUSB_PRCM_CONF:
527 s->prcm_config = value;
528 break;
529 case TUSB_PRCM_MNGMT:
530 s->prcm_mngmt = value;
531 break;
532 case TUSB_PRCM_WAKEUP_CLEAR:
533 break;
534 case TUSB_PRCM_WAKEUP_MASK:
535 s->wkup_mask = value;
536 break;
538 case TUSB_PULLUP_1_CTRL:
539 s->pullup[0] = value;
540 break;
541 case TUSB_PULLUP_2_CTRL:
542 s->pullup[1] = value;
543 break;
544 case TUSB_INT_CTRL_CONF:
545 s->control_config = value;
546 tusb_intr_update(s);
547 break;
549 case TUSB_USBIP_INT_SET:
550 s->usbip_intr |= value;
551 tusb_usbip_intr_update(s);
552 break;
553 case TUSB_USBIP_INT_CLEAR:
554 s->usbip_intr &= ~value;
555 tusb_usbip_intr_update(s);
556 musb_core_intr_clear(s->musb, ~value);
557 break;
558 case TUSB_USBIP_INT_MASK:
559 s->usbip_mask = value;
560 tusb_usbip_intr_update(s);
561 break;
563 case TUSB_DMA_INT_SET:
564 s->dma_intr |= value;
565 tusb_dma_intr_update(s);
566 break;
567 case TUSB_DMA_INT_CLEAR:
568 s->dma_intr &= ~value;
569 tusb_dma_intr_update(s);
570 break;
571 case TUSB_DMA_INT_MASK:
572 s->dma_mask = value;
573 tusb_dma_intr_update(s);
574 break;
576 case TUSB_GPIO_INT_SET:
577 s->gpio_intr |= value;
578 tusb_gpio_intr_update(s);
579 break;
580 case TUSB_GPIO_INT_CLEAR:
581 s->gpio_intr &= ~value;
582 tusb_gpio_intr_update(s);
583 break;
584 case TUSB_GPIO_INT_MASK:
585 s->gpio_mask = value;
586 tusb_gpio_intr_update(s);
587 break;
589 case TUSB_INT_SRC_SET:
590 s->intr |= value;
591 tusb_intr_update(s);
592 break;
593 case TUSB_INT_SRC_CLEAR:
594 s->intr &= ~value;
595 tusb_intr_update(s);
596 break;
597 case TUSB_INT_MASK:
598 s->mask = value;
599 tusb_intr_update(s);
600 break;
602 case TUSB_GPIO_CONF:
603 s->gpio_config = value;
604 break;
605 case TUSB_DMA_REQ_CONF:
606 s->dma_config = value;
607 break;
608 case TUSB_EP0_CONF:
609 s->ep0_config = value & 0x1ff;
610 musb_set_size(s->musb, 0, TUSB_EP0_CONFIG_XFR_SIZE(value),
611 value & TUSB_EP0_CONFIG_DIR_TX);
612 break;
613 case TUSB_EP_IN_SIZE ... (TUSB_EP_IN_SIZE + 0x3b):
614 epnum = (offset - TUSB_EP_IN_SIZE) >> 2;
615 s->tx_config[epnum] = value;
616 musb_set_size(s->musb, epnum + 1, TUSB_EP_CONFIG_XFR_SIZE(value), 1);
617 break;
618 case TUSB_DMA_EP_MAP:
619 s->dma_map = value;
620 break;
621 case TUSB_EP_OUT_SIZE ... (TUSB_EP_OUT_SIZE + 0x3b):
622 epnum = (offset - TUSB_EP_OUT_SIZE) >> 2;
623 s->rx_config[epnum] = value;
624 musb_set_size(s->musb, epnum + 1, TUSB_EP_CONFIG_XFR_SIZE(value), 0);
625 break;
626 case TUSB_EP_MAX_PACKET_SIZE_OFFSET ...
627 (TUSB_EP_MAX_PACKET_SIZE_OFFSET + 0x3b):
628 return; /* TODO */
629 case TUSB_WAIT_COUNT:
630 return; /* TODO */
632 case TUSB_SCRATCH_PAD:
633 s->scratch = value;
634 break;
636 case TUSB_PROD_TEST_RESET:
637 s->test_reset = value;
638 break;
640 default:
641 printf("%s: unknown register at %03x\n", __func__, offset);
642 return;
646 static uint64_t tusb_async_readfn(void *opaque, hwaddr addr, unsigned size)
648 switch (size) {
649 case 1:
650 return tusb_async_readb(opaque, addr);
651 case 2:
652 return tusb_async_readh(opaque, addr);
653 case 4:
654 return tusb_async_readw(opaque, addr);
655 default:
656 g_assert_not_reached();
660 static void tusb_async_writefn(void *opaque, hwaddr addr,
661 uint64_t value, unsigned size)
663 switch (size) {
664 case 1:
665 tusb_async_writeb(opaque, addr, value);
666 break;
667 case 2:
668 tusb_async_writeh(opaque, addr, value);
669 break;
670 case 4:
671 tusb_async_writew(opaque, addr, value);
672 break;
673 default:
674 g_assert_not_reached();
678 static const MemoryRegionOps tusb_async_ops = {
679 .read = tusb_async_readfn,
680 .write = tusb_async_writefn,
681 .valid.min_access_size = 1,
682 .valid.max_access_size = 4,
683 .endianness = DEVICE_NATIVE_ENDIAN,
686 static void tusb_otg_tick(void *opaque)
688 TUSBState *s = (TUSBState *) opaque;
690 s->otg_timer_val = 0;
691 s->intr |= TUSB_INT_SRC_OTG_TIMEOUT;
692 tusb_intr_update(s);
695 static void tusb_power_tick(void *opaque)
697 TUSBState *s = (TUSBState *) opaque;
699 if (s->power) {
700 s->intr_ok = ~0;
701 tusb_intr_update(s);
705 static void tusb_musb_core_intr(void *opaque, int source, int level)
707 TUSBState *s = (TUSBState *) opaque;
708 uint16_t otg_status = s->otg_status;
710 switch (source) {
711 case musb_set_vbus:
712 if (level)
713 otg_status |= TUSB_DEV_OTG_STAT_VBUS_VALID;
714 else
715 otg_status &= ~TUSB_DEV_OTG_STAT_VBUS_VALID;
717 /* XXX: only if TUSB_PHY_OTG_CTRL_OTG_VBUS_DET_EN set? */
718 /* XXX: only if TUSB_PRCM_MNGMT_OTG_VBUS_DET_EN set? */
719 if (s->otg_status != otg_status) {
720 s->otg_status = otg_status;
721 s->intr |= TUSB_INT_SRC_VBUS_SENSE_CHNG;
722 tusb_intr_update(s);
724 break;
726 case musb_set_session:
727 /* XXX: only if TUSB_PHY_OTG_CTRL_OTG_SESS_END_EN set? */
728 /* XXX: only if TUSB_PRCM_MNGMT_OTG_SESS_END_EN set? */
729 if (level) {
730 s->otg_status |= TUSB_DEV_OTG_STAT_SESS_VALID;
731 s->otg_status &= ~TUSB_DEV_OTG_STAT_SESS_END;
732 } else {
733 s->otg_status &= ~TUSB_DEV_OTG_STAT_SESS_VALID;
734 s->otg_status |= TUSB_DEV_OTG_STAT_SESS_END;
737 /* XXX: some IRQ or anything? */
738 break;
740 case musb_irq_tx:
741 case musb_irq_rx:
742 s->usbip_intr = musb_core_intr_get(s->musb);
743 /* Fall through. */
744 default:
745 if (level)
746 s->intr |= 1 << source;
747 else
748 s->intr &= ~(1 << source);
749 tusb_intr_update(s);
750 break;
754 static void tusb6010_power(TUSBState *s, int on)
756 if (!on) {
757 s->power = 0;
758 } else if (!s->power && on) {
759 s->power = 1;
760 /* Pull the interrupt down after TUSB6010 comes up. */
761 s->intr_ok = 0;
762 tusb_intr_update(s);
763 timer_mod(s->pwr_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
764 NANOSECONDS_PER_SECOND / 2);
768 static void tusb6010_irq(void *opaque, int source, int level)
770 if (source) {
771 tusb_musb_core_intr(opaque, source - 1, level);
772 } else {
773 tusb6010_power(opaque, level);
777 static void tusb6010_reset(DeviceState *dev)
779 TUSBState *s = TUSB(dev);
780 int i;
782 s->test_reset = TUSB_PROD_TEST_RESET_VAL;
783 s->host_mode = 0;
784 s->dev_config = 0;
785 s->otg_status = 0; /* !TUSB_DEV_OTG_STAT_ID_STATUS means host mode */
786 s->power = 0;
787 s->mask = 0xffffffff;
788 s->intr = 0x00000000;
789 s->otg_timer_val = 0;
790 s->scratch = 0;
791 s->prcm_config = 0;
792 s->prcm_mngmt = 0;
793 s->intr_ok = 0;
794 s->usbip_intr = 0;
795 s->usbip_mask = 0;
796 s->gpio_intr = 0;
797 s->gpio_mask = 0;
798 s->gpio_config = 0;
799 s->dma_intr = 0;
800 s->dma_mask = 0;
801 s->dma_map = 0;
802 s->dma_config = 0;
803 s->ep0_config = 0;
804 s->wkup_mask = 0;
805 s->pullup[0] = s->pullup[1] = 0;
806 s->control_config = 0;
807 for (i = 0; i < 15; i++) {
808 s->rx_config[i] = s->tx_config[i] = 0;
810 musb_reset(s->musb);
813 static void tusb6010_realize(DeviceState *dev, Error **errp)
815 TUSBState *s = TUSB(dev);
816 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
818 s->otg_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tusb_otg_tick, s);
819 s->pwr_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, tusb_power_tick, s);
820 memory_region_init_io(&s->iomem[1], OBJECT(s), &tusb_async_ops, s,
821 "tusb-async", UINT32_MAX);
822 sysbus_init_mmio(sbd, &s->iomem[0]);
823 sysbus_init_mmio(sbd, &s->iomem[1]);
824 sysbus_init_irq(sbd, &s->irq);
825 qdev_init_gpio_in(dev, tusb6010_irq, musb_irq_max + 1);
826 s->musb = musb_init(dev, 1);
829 static void tusb6010_class_init(ObjectClass *klass, void *data)
831 DeviceClass *dc = DEVICE_CLASS(klass);
833 dc->realize = tusb6010_realize;
834 dc->reset = tusb6010_reset;
837 static const TypeInfo tusb6010_info = {
838 .name = TYPE_TUSB6010,
839 .parent = TYPE_SYS_BUS_DEVICE,
840 .instance_size = sizeof(TUSBState),
841 .class_init = tusb6010_class_init,
844 static void tusb6010_register_types(void)
846 type_register_static(&tusb6010_info);
849 type_init(tusb6010_register_types)