2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/i386/x86.h"
28 #include "hw/i386/pc.h"
29 #include "hw/char/serial.h"
30 #include "hw/char/parallel.h"
31 #include "hw/i386/apic.h"
32 #include "hw/i386/topology.h"
33 #include "hw/i386/fw_cfg.h"
34 #include "sysemu/cpus.h"
35 #include "hw/block/fdc.h"
37 #include "hw/pci/pci.h"
38 #include "hw/pci/pci_bus.h"
39 #include "hw/nvram/fw_cfg.h"
40 #include "hw/timer/hpet.h"
41 #include "hw/firmware/smbios.h"
42 #include "hw/loader.h"
44 #include "migration/vmstate.h"
45 #include "multiboot.h"
46 #include "hw/rtc/mc146818rtc.h"
47 #include "hw/intc/i8259.h"
48 #include "hw/dma/i8257.h"
49 #include "hw/timer/i8254.h"
50 #include "hw/input/i8042.h"
52 #include "hw/audio/pcspk.h"
53 #include "hw/pci/msi.h"
54 #include "hw/sysbus.h"
55 #include "sysemu/sysemu.h"
56 #include "sysemu/tcg.h"
57 #include "sysemu/numa.h"
58 #include "sysemu/kvm.h"
59 #include "sysemu/qtest.h"
60 #include "sysemu/reset.h"
61 #include "sysemu/runstate.h"
63 #include "hw/xen/xen.h"
64 #include "hw/xen/start_info.h"
65 #include "ui/qemu-spice.h"
66 #include "exec/memory.h"
67 #include "exec/address-spaces.h"
68 #include "sysemu/arch_init.h"
69 #include "qemu/bitmap.h"
70 #include "qemu/config-file.h"
71 #include "qemu/error-report.h"
72 #include "qemu/option.h"
73 #include "qemu/cutils.h"
74 #include "hw/acpi/acpi.h"
75 #include "hw/acpi/cpu_hotplug.h"
76 #include "hw/boards.h"
77 #include "acpi-build.h"
78 #include "hw/mem/pc-dimm.h"
79 #include "qapi/error.h"
80 #include "qapi/qapi-visit-common.h"
81 #include "qapi/visitor.h"
82 #include "hw/core/cpu.h"
84 #include "hw/i386/intel_iommu.h"
85 #include "hw/net/ne2000-isa.h"
86 #include "standard-headers/asm-x86/bootparam.h"
87 #include "hw/virtio/virtio-pmem-pci.h"
88 #include "hw/mem/memory-device.h"
89 #include "sysemu/replay.h"
90 #include "qapi/qmp/qerror.h"
91 #include "config-devices.h"
92 #include "e820_memory_layout.h"
96 GlobalProperty pc_compat_4_2
[] = {};
97 const size_t pc_compat_4_2_len
= G_N_ELEMENTS(pc_compat_4_2
);
99 GlobalProperty pc_compat_4_1
[] = {};
100 const size_t pc_compat_4_1_len
= G_N_ELEMENTS(pc_compat_4_1
);
102 GlobalProperty pc_compat_4_0
[] = {};
103 const size_t pc_compat_4_0_len
= G_N_ELEMENTS(pc_compat_4_0
);
105 GlobalProperty pc_compat_3_1
[] = {
106 { "intel-iommu", "dma-drain", "off" },
107 { "Opteron_G3" "-" TYPE_X86_CPU
, "rdtscp", "off" },
108 { "Opteron_G4" "-" TYPE_X86_CPU
, "rdtscp", "off" },
109 { "Opteron_G4" "-" TYPE_X86_CPU
, "npt", "off" },
110 { "Opteron_G4" "-" TYPE_X86_CPU
, "nrip-save", "off" },
111 { "Opteron_G5" "-" TYPE_X86_CPU
, "rdtscp", "off" },
112 { "Opteron_G5" "-" TYPE_X86_CPU
, "npt", "off" },
113 { "Opteron_G5" "-" TYPE_X86_CPU
, "nrip-save", "off" },
114 { "EPYC" "-" TYPE_X86_CPU
, "npt", "off" },
115 { "EPYC" "-" TYPE_X86_CPU
, "nrip-save", "off" },
116 { "EPYC-IBPB" "-" TYPE_X86_CPU
, "npt", "off" },
117 { "EPYC-IBPB" "-" TYPE_X86_CPU
, "nrip-save", "off" },
118 { "Skylake-Client" "-" TYPE_X86_CPU
, "mpx", "on" },
119 { "Skylake-Client-IBRS" "-" TYPE_X86_CPU
, "mpx", "on" },
120 { "Skylake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
121 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU
, "mpx", "on" },
122 { "Cascadelake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
123 { "Icelake-Client" "-" TYPE_X86_CPU
, "mpx", "on" },
124 { "Icelake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
125 { "Cascadelake-Server" "-" TYPE_X86_CPU
, "stepping", "5" },
126 { TYPE_X86_CPU
, "x-intel-pt-auto-level", "off" },
128 const size_t pc_compat_3_1_len
= G_N_ELEMENTS(pc_compat_3_1
);
130 GlobalProperty pc_compat_3_0
[] = {
131 { TYPE_X86_CPU
, "x-hv-synic-kvm-only", "on" },
132 { "Skylake-Server" "-" TYPE_X86_CPU
, "pku", "off" },
133 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU
, "pku", "off" },
135 const size_t pc_compat_3_0_len
= G_N_ELEMENTS(pc_compat_3_0
);
137 GlobalProperty pc_compat_2_12
[] = {
138 { TYPE_X86_CPU
, "legacy-cache", "on" },
139 { TYPE_X86_CPU
, "topoext", "off" },
140 { "EPYC-" TYPE_X86_CPU
, "xlevel", "0x8000000a" },
141 { "EPYC-IBPB-" TYPE_X86_CPU
, "xlevel", "0x8000000a" },
143 const size_t pc_compat_2_12_len
= G_N_ELEMENTS(pc_compat_2_12
);
145 GlobalProperty pc_compat_2_11
[] = {
146 { TYPE_X86_CPU
, "x-migrate-smi-count", "off" },
147 { "Skylake-Server" "-" TYPE_X86_CPU
, "clflushopt", "off" },
149 const size_t pc_compat_2_11_len
= G_N_ELEMENTS(pc_compat_2_11
);
151 GlobalProperty pc_compat_2_10
[] = {
152 { TYPE_X86_CPU
, "x-hv-max-vps", "0x40" },
153 { "i440FX-pcihost", "x-pci-hole64-fix", "off" },
154 { "q35-pcihost", "x-pci-hole64-fix", "off" },
156 const size_t pc_compat_2_10_len
= G_N_ELEMENTS(pc_compat_2_10
);
158 GlobalProperty pc_compat_2_9
[] = {
159 { "mch", "extended-tseg-mbytes", "0" },
161 const size_t pc_compat_2_9_len
= G_N_ELEMENTS(pc_compat_2_9
);
163 GlobalProperty pc_compat_2_8
[] = {
164 { TYPE_X86_CPU
, "tcg-cpuid", "off" },
165 { "kvmclock", "x-mach-use-reliable-get-clock", "off" },
166 { "ICH9-LPC", "x-smi-broadcast", "off" },
167 { TYPE_X86_CPU
, "vmware-cpuid-freq", "off" },
168 { "Haswell-" TYPE_X86_CPU
, "stepping", "1" },
170 const size_t pc_compat_2_8_len
= G_N_ELEMENTS(pc_compat_2_8
);
172 GlobalProperty pc_compat_2_7
[] = {
173 { TYPE_X86_CPU
, "l3-cache", "off" },
174 { TYPE_X86_CPU
, "full-cpuid-auto-level", "off" },
175 { "Opteron_G3" "-" TYPE_X86_CPU
, "family", "15" },
176 { "Opteron_G3" "-" TYPE_X86_CPU
, "model", "6" },
177 { "Opteron_G3" "-" TYPE_X86_CPU
, "stepping", "1" },
178 { "isa-pcspk", "migrate", "off" },
180 const size_t pc_compat_2_7_len
= G_N_ELEMENTS(pc_compat_2_7
);
182 GlobalProperty pc_compat_2_6
[] = {
183 { TYPE_X86_CPU
, "cpuid-0xb", "off" },
184 { "vmxnet3", "romfile", "" },
185 { TYPE_X86_CPU
, "fill-mtrr-mask", "off" },
186 { "apic-common", "legacy-instance-id", "on", }
188 const size_t pc_compat_2_6_len
= G_N_ELEMENTS(pc_compat_2_6
);
190 GlobalProperty pc_compat_2_5
[] = {};
191 const size_t pc_compat_2_5_len
= G_N_ELEMENTS(pc_compat_2_5
);
193 GlobalProperty pc_compat_2_4
[] = {
194 PC_CPU_MODEL_IDS("2.4.0")
195 { "Haswell-" TYPE_X86_CPU
, "abm", "off" },
196 { "Haswell-noTSX-" TYPE_X86_CPU
, "abm", "off" },
197 { "Broadwell-" TYPE_X86_CPU
, "abm", "off" },
198 { "Broadwell-noTSX-" TYPE_X86_CPU
, "abm", "off" },
199 { "host" "-" TYPE_X86_CPU
, "host-cache-info", "on" },
200 { TYPE_X86_CPU
, "check", "off" },
201 { "qemu64" "-" TYPE_X86_CPU
, "sse4a", "on" },
202 { "qemu64" "-" TYPE_X86_CPU
, "abm", "on" },
203 { "qemu64" "-" TYPE_X86_CPU
, "popcnt", "on" },
204 { "qemu32" "-" TYPE_X86_CPU
, "popcnt", "on" },
205 { "Opteron_G2" "-" TYPE_X86_CPU
, "rdtscp", "on" },
206 { "Opteron_G3" "-" TYPE_X86_CPU
, "rdtscp", "on" },
207 { "Opteron_G4" "-" TYPE_X86_CPU
, "rdtscp", "on" },
208 { "Opteron_G5" "-" TYPE_X86_CPU
, "rdtscp", "on", }
210 const size_t pc_compat_2_4_len
= G_N_ELEMENTS(pc_compat_2_4
);
212 GlobalProperty pc_compat_2_3
[] = {
213 PC_CPU_MODEL_IDS("2.3.0")
214 { TYPE_X86_CPU
, "arat", "off" },
215 { "qemu64" "-" TYPE_X86_CPU
, "min-level", "4" },
216 { "kvm64" "-" TYPE_X86_CPU
, "min-level", "5" },
217 { "pentium3" "-" TYPE_X86_CPU
, "min-level", "2" },
218 { "n270" "-" TYPE_X86_CPU
, "min-level", "5" },
219 { "Conroe" "-" TYPE_X86_CPU
, "min-level", "4" },
220 { "Penryn" "-" TYPE_X86_CPU
, "min-level", "4" },
221 { "Nehalem" "-" TYPE_X86_CPU
, "min-level", "4" },
222 { "n270" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
223 { "Penryn" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
224 { "Conroe" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
225 { "Nehalem" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
226 { "Westmere" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
227 { "SandyBridge" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
228 { "IvyBridge" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
229 { "Haswell" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
230 { "Haswell-noTSX" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
231 { "Broadwell" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
232 { "Broadwell-noTSX" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
233 { TYPE_X86_CPU
, "kvm-no-smi-migration", "on" },
235 const size_t pc_compat_2_3_len
= G_N_ELEMENTS(pc_compat_2_3
);
237 GlobalProperty pc_compat_2_2
[] = {
238 PC_CPU_MODEL_IDS("2.2.0")
239 { "kvm64" "-" TYPE_X86_CPU
, "vme", "off" },
240 { "kvm32" "-" TYPE_X86_CPU
, "vme", "off" },
241 { "Conroe" "-" TYPE_X86_CPU
, "vme", "off" },
242 { "Penryn" "-" TYPE_X86_CPU
, "vme", "off" },
243 { "Nehalem" "-" TYPE_X86_CPU
, "vme", "off" },
244 { "Westmere" "-" TYPE_X86_CPU
, "vme", "off" },
245 { "SandyBridge" "-" TYPE_X86_CPU
, "vme", "off" },
246 { "Haswell" "-" TYPE_X86_CPU
, "vme", "off" },
247 { "Broadwell" "-" TYPE_X86_CPU
, "vme", "off" },
248 { "Opteron_G1" "-" TYPE_X86_CPU
, "vme", "off" },
249 { "Opteron_G2" "-" TYPE_X86_CPU
, "vme", "off" },
250 { "Opteron_G3" "-" TYPE_X86_CPU
, "vme", "off" },
251 { "Opteron_G4" "-" TYPE_X86_CPU
, "vme", "off" },
252 { "Opteron_G5" "-" TYPE_X86_CPU
, "vme", "off" },
253 { "Haswell" "-" TYPE_X86_CPU
, "f16c", "off" },
254 { "Haswell" "-" TYPE_X86_CPU
, "rdrand", "off" },
255 { "Broadwell" "-" TYPE_X86_CPU
, "f16c", "off" },
256 { "Broadwell" "-" TYPE_X86_CPU
, "rdrand", "off" },
258 const size_t pc_compat_2_2_len
= G_N_ELEMENTS(pc_compat_2_2
);
260 GlobalProperty pc_compat_2_1
[] = {
261 PC_CPU_MODEL_IDS("2.1.0")
262 { "coreduo" "-" TYPE_X86_CPU
, "vmx", "on" },
263 { "core2duo" "-" TYPE_X86_CPU
, "vmx", "on" },
265 const size_t pc_compat_2_1_len
= G_N_ELEMENTS(pc_compat_2_1
);
267 GlobalProperty pc_compat_2_0
[] = {
268 PC_CPU_MODEL_IDS("2.0.0")
269 { "virtio-scsi-pci", "any_layout", "off" },
270 { "PIIX4_PM", "memory-hotplug-support", "off" },
271 { "apic", "version", "0x11" },
272 { "nec-usb-xhci", "superspeed-ports-first", "off" },
273 { "nec-usb-xhci", "force-pcie-endcap", "on" },
274 { "pci-serial", "prog_if", "0" },
275 { "pci-serial-2x", "prog_if", "0" },
276 { "pci-serial-4x", "prog_if", "0" },
277 { "virtio-net-pci", "guest_announce", "off" },
278 { "ICH9-LPC", "memory-hotplug-support", "off" },
279 { "xio3130-downstream", COMPAT_PROP_PCP
, "off" },
280 { "ioh3420", COMPAT_PROP_PCP
, "off" },
282 const size_t pc_compat_2_0_len
= G_N_ELEMENTS(pc_compat_2_0
);
284 GlobalProperty pc_compat_1_7
[] = {
285 PC_CPU_MODEL_IDS("1.7.0")
286 { TYPE_USB_DEVICE
, "msos-desc", "no" },
287 { "PIIX4_PM", "acpi-pci-hotplug-with-bridge-support", "off" },
288 { "hpet", HPET_INTCAP
, "4" },
290 const size_t pc_compat_1_7_len
= G_N_ELEMENTS(pc_compat_1_7
);
292 GlobalProperty pc_compat_1_6
[] = {
293 PC_CPU_MODEL_IDS("1.6.0")
294 { "e1000", "mitigation", "off" },
295 { "qemu64-" TYPE_X86_CPU
, "model", "2" },
296 { "qemu32-" TYPE_X86_CPU
, "model", "3" },
297 { "i440FX-pcihost", "short_root_bus", "1" },
298 { "q35-pcihost", "short_root_bus", "1" },
300 const size_t pc_compat_1_6_len
= G_N_ELEMENTS(pc_compat_1_6
);
302 GlobalProperty pc_compat_1_5
[] = {
303 PC_CPU_MODEL_IDS("1.5.0")
304 { "Conroe-" TYPE_X86_CPU
, "model", "2" },
305 { "Conroe-" TYPE_X86_CPU
, "min-level", "2" },
306 { "Penryn-" TYPE_X86_CPU
, "model", "2" },
307 { "Penryn-" TYPE_X86_CPU
, "min-level", "2" },
308 { "Nehalem-" TYPE_X86_CPU
, "model", "2" },
309 { "Nehalem-" TYPE_X86_CPU
, "min-level", "2" },
310 { "virtio-net-pci", "any_layout", "off" },
311 { TYPE_X86_CPU
, "pmu", "on" },
312 { "i440FX-pcihost", "short_root_bus", "0" },
313 { "q35-pcihost", "short_root_bus", "0" },
315 const size_t pc_compat_1_5_len
= G_N_ELEMENTS(pc_compat_1_5
);
317 GlobalProperty pc_compat_1_4
[] = {
318 PC_CPU_MODEL_IDS("1.4.0")
319 { "scsi-hd", "discard_granularity", "0" },
320 { "scsi-cd", "discard_granularity", "0" },
321 { "scsi-disk", "discard_granularity", "0" },
322 { "ide-hd", "discard_granularity", "0" },
323 { "ide-cd", "discard_granularity", "0" },
324 { "ide-drive", "discard_granularity", "0" },
325 { "virtio-blk-pci", "discard_granularity", "0" },
326 /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */
327 { "virtio-serial-pci", "vectors", "0xFFFFFFFF" },
328 { "virtio-net-pci", "ctrl_guest_offloads", "off" },
329 { "e1000", "romfile", "pxe-e1000.rom" },
330 { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" },
331 { "pcnet", "romfile", "pxe-pcnet.rom" },
332 { "rtl8139", "romfile", "pxe-rtl8139.rom" },
333 { "virtio-net-pci", "romfile", "pxe-virtio.rom" },
334 { "486-" TYPE_X86_CPU
, "model", "0" },
335 { "n270" "-" TYPE_X86_CPU
, "movbe", "off" },
336 { "Westmere" "-" TYPE_X86_CPU
, "pclmulqdq", "off" },
338 const size_t pc_compat_1_4_len
= G_N_ELEMENTS(pc_compat_1_4
);
340 GSIState
*pc_gsi_create(qemu_irq
**irqs
, bool pci_enabled
)
344 s
= g_new0(GSIState
, 1);
345 if (kvm_ioapic_in_kernel()) {
346 kvm_pc_setup_irq_routing(pci_enabled
);
348 *irqs
= qemu_allocate_irqs(gsi_handler
, s
, GSI_NUM_PINS
);
353 static void ioport80_write(void *opaque
, hwaddr addr
, uint64_t data
,
358 static uint64_t ioport80_read(void *opaque
, hwaddr addr
, unsigned size
)
360 return 0xffffffffffffffffULL
;
363 /* MSDOS compatibility mode FPU exception support */
364 static void ioportF0_write(void *opaque
, hwaddr addr
, uint64_t data
,
372 static uint64_t ioportF0_read(void *opaque
, hwaddr addr
, unsigned size
)
374 return 0xffffffffffffffffULL
;
377 /* PC cmos mappings */
379 #define REG_EQUIPMENT_BYTE 0x14
381 int cmos_get_fd_drive_type(FloppyDriveType fd0
)
386 case FLOPPY_DRIVE_TYPE_144
:
387 /* 1.44 Mb 3"5 drive */
390 case FLOPPY_DRIVE_TYPE_288
:
391 /* 2.88 Mb 3"5 drive */
394 case FLOPPY_DRIVE_TYPE_120
:
395 /* 1.2 Mb 5"5 drive */
398 case FLOPPY_DRIVE_TYPE_NONE
:
406 static void cmos_init_hd(ISADevice
*s
, int type_ofs
, int info_ofs
,
407 int16_t cylinders
, int8_t heads
, int8_t sectors
)
409 rtc_set_memory(s
, type_ofs
, 47);
410 rtc_set_memory(s
, info_ofs
, cylinders
);
411 rtc_set_memory(s
, info_ofs
+ 1, cylinders
>> 8);
412 rtc_set_memory(s
, info_ofs
+ 2, heads
);
413 rtc_set_memory(s
, info_ofs
+ 3, 0xff);
414 rtc_set_memory(s
, info_ofs
+ 4, 0xff);
415 rtc_set_memory(s
, info_ofs
+ 5, 0xc0 | ((heads
> 8) << 3));
416 rtc_set_memory(s
, info_ofs
+ 6, cylinders
);
417 rtc_set_memory(s
, info_ofs
+ 7, cylinders
>> 8);
418 rtc_set_memory(s
, info_ofs
+ 8, sectors
);
421 /* convert boot_device letter to something recognizable by the bios */
422 static int boot_device2nibble(char boot_device
)
424 switch(boot_device
) {
427 return 0x01; /* floppy boot */
429 return 0x02; /* hard drive boot */
431 return 0x03; /* CD-ROM boot */
433 return 0x04; /* Network boot */
438 static void set_boot_dev(ISADevice
*s
, const char *boot_device
, Error
**errp
)
440 #define PC_MAX_BOOT_DEVICES 3
441 int nbds
, bds
[3] = { 0, };
444 nbds
= strlen(boot_device
);
445 if (nbds
> PC_MAX_BOOT_DEVICES
) {
446 error_setg(errp
, "Too many boot devices for PC");
449 for (i
= 0; i
< nbds
; i
++) {
450 bds
[i
] = boot_device2nibble(boot_device
[i
]);
452 error_setg(errp
, "Invalid boot device for PC: '%c'",
457 rtc_set_memory(s
, 0x3d, (bds
[1] << 4) | bds
[0]);
458 rtc_set_memory(s
, 0x38, (bds
[2] << 4) | (fd_bootchk
? 0x0 : 0x1));
461 static void pc_boot_set(void *opaque
, const char *boot_device
, Error
**errp
)
463 set_boot_dev(opaque
, boot_device
, errp
);
466 static void pc_cmos_init_floppy(ISADevice
*rtc_state
, ISADevice
*floppy
)
469 FloppyDriveType fd_type
[2] = { FLOPPY_DRIVE_TYPE_NONE
,
470 FLOPPY_DRIVE_TYPE_NONE
};
474 for (i
= 0; i
< 2; i
++) {
475 fd_type
[i
] = isa_fdc_get_drive_type(floppy
, i
);
478 val
= (cmos_get_fd_drive_type(fd_type
[0]) << 4) |
479 cmos_get_fd_drive_type(fd_type
[1]);
480 rtc_set_memory(rtc_state
, 0x10, val
);
482 val
= rtc_get_memory(rtc_state
, REG_EQUIPMENT_BYTE
);
484 if (fd_type
[0] != FLOPPY_DRIVE_TYPE_NONE
) {
487 if (fd_type
[1] != FLOPPY_DRIVE_TYPE_NONE
) {
494 val
|= 0x01; /* 1 drive, ready for boot */
497 val
|= 0x41; /* 2 drives, ready for boot */
500 rtc_set_memory(rtc_state
, REG_EQUIPMENT_BYTE
, val
);
503 typedef struct pc_cmos_init_late_arg
{
504 ISADevice
*rtc_state
;
506 } pc_cmos_init_late_arg
;
508 typedef struct check_fdc_state
{
513 static int check_fdc(Object
*obj
, void *opaque
)
515 CheckFdcState
*state
= opaque
;
518 Error
*local_err
= NULL
;
520 fdc
= object_dynamic_cast(obj
, TYPE_ISA_FDC
);
525 iobase
= object_property_get_uint(obj
, "iobase", &local_err
);
526 if (local_err
|| iobase
!= 0x3f0) {
527 error_free(local_err
);
532 state
->multiple
= true;
534 state
->floppy
= ISA_DEVICE(obj
);
539 static const char * const fdc_container_path
[] = {
540 "/unattached", "/peripheral", "/peripheral-anon"
544 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers
547 ISADevice
*pc_find_fdc0(void)
551 CheckFdcState state
= { 0 };
553 for (i
= 0; i
< ARRAY_SIZE(fdc_container_path
); i
++) {
554 container
= container_get(qdev_get_machine(), fdc_container_path
[i
]);
555 object_child_foreach(container
, check_fdc
, &state
);
558 if (state
.multiple
) {
559 warn_report("multiple floppy disk controllers with "
560 "iobase=0x3f0 have been found");
561 error_printf("the one being picked for CMOS setup might not reflect "
568 static void pc_cmos_init_late(void *opaque
)
570 pc_cmos_init_late_arg
*arg
= opaque
;
571 ISADevice
*s
= arg
->rtc_state
;
573 int8_t heads
, sectors
;
578 if (arg
->idebus
[0] && ide_get_geometry(arg
->idebus
[0], 0,
579 &cylinders
, &heads
, §ors
) >= 0) {
580 cmos_init_hd(s
, 0x19, 0x1b, cylinders
, heads
, sectors
);
583 if (arg
->idebus
[0] && ide_get_geometry(arg
->idebus
[0], 1,
584 &cylinders
, &heads
, §ors
) >= 0) {
585 cmos_init_hd(s
, 0x1a, 0x24, cylinders
, heads
, sectors
);
588 rtc_set_memory(s
, 0x12, val
);
591 for (i
= 0; i
< 4; i
++) {
592 /* NOTE: ide_get_geometry() returns the physical
593 geometry. It is always such that: 1 <= sects <= 63, 1
594 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
595 geometry can be different if a translation is done. */
596 if (arg
->idebus
[i
/ 2] &&
597 ide_get_geometry(arg
->idebus
[i
/ 2], i
% 2,
598 &cylinders
, &heads
, §ors
) >= 0) {
599 trans
= ide_get_bios_chs_trans(arg
->idebus
[i
/ 2], i
% 2) - 1;
600 assert((trans
& ~3) == 0);
601 val
|= trans
<< (i
* 2);
604 rtc_set_memory(s
, 0x39, val
);
606 pc_cmos_init_floppy(s
, pc_find_fdc0());
608 qemu_unregister_reset(pc_cmos_init_late
, opaque
);
611 void pc_cmos_init(PCMachineState
*pcms
,
612 BusState
*idebus0
, BusState
*idebus1
,
616 static pc_cmos_init_late_arg arg
;
617 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
619 /* various important CMOS locations needed by PC/Bochs bios */
622 /* base memory (first MiB) */
623 val
= MIN(x86ms
->below_4g_mem_size
/ KiB
, 640);
624 rtc_set_memory(s
, 0x15, val
);
625 rtc_set_memory(s
, 0x16, val
>> 8);
626 /* extended memory (next 64MiB) */
627 if (x86ms
->below_4g_mem_size
> 1 * MiB
) {
628 val
= (x86ms
->below_4g_mem_size
- 1 * MiB
) / KiB
;
634 rtc_set_memory(s
, 0x17, val
);
635 rtc_set_memory(s
, 0x18, val
>> 8);
636 rtc_set_memory(s
, 0x30, val
);
637 rtc_set_memory(s
, 0x31, val
>> 8);
638 /* memory between 16MiB and 4GiB */
639 if (x86ms
->below_4g_mem_size
> 16 * MiB
) {
640 val
= (x86ms
->below_4g_mem_size
- 16 * MiB
) / (64 * KiB
);
646 rtc_set_memory(s
, 0x34, val
);
647 rtc_set_memory(s
, 0x35, val
>> 8);
648 /* memory above 4GiB */
649 val
= x86ms
->above_4g_mem_size
/ 65536;
650 rtc_set_memory(s
, 0x5b, val
);
651 rtc_set_memory(s
, 0x5c, val
>> 8);
652 rtc_set_memory(s
, 0x5d, val
>> 16);
654 object_property_add_link(OBJECT(pcms
), "rtc_state",
656 (Object
**)&x86ms
->rtc
,
657 object_property_allow_set_link
,
658 OBJ_PROP_LINK_STRONG
, &error_abort
);
659 object_property_set_link(OBJECT(pcms
), OBJECT(s
),
660 "rtc_state", &error_abort
);
662 set_boot_dev(s
, MACHINE(pcms
)->boot_order
, &error_fatal
);
665 val
|= 0x02; /* FPU is there */
666 val
|= 0x04; /* PS/2 mouse installed */
667 rtc_set_memory(s
, REG_EQUIPMENT_BYTE
, val
);
669 /* hard drives and FDC */
671 arg
.idebus
[0] = idebus0
;
672 arg
.idebus
[1] = idebus1
;
673 qemu_register_reset(pc_cmos_init_late
, &arg
);
676 static void handle_a20_line_change(void *opaque
, int irq
, int level
)
678 X86CPU
*cpu
= opaque
;
680 /* XXX: send to all CPUs ? */
681 /* XXX: add logic to handle multiple A20 line sources */
682 x86_cpu_set_a20(cpu
, level
);
685 #define NE2000_NB_MAX 6
687 static const int ne2000_io
[NE2000_NB_MAX
] = { 0x300, 0x320, 0x340, 0x360,
689 static const int ne2000_irq
[NE2000_NB_MAX
] = { 9, 10, 11, 3, 4, 5 };
691 void pc_init_ne2k_isa(ISABus
*bus
, NICInfo
*nd
)
693 static int nb_ne2k
= 0;
695 if (nb_ne2k
== NE2000_NB_MAX
)
697 isa_ne2000_init(bus
, ne2000_io
[nb_ne2k
],
698 ne2000_irq
[nb_ne2k
], nd
);
702 void pc_acpi_smi_interrupt(void *opaque
, int irq
, int level
)
704 X86CPU
*cpu
= opaque
;
707 cpu_interrupt(CPU(cpu
), CPU_INTERRUPT_SMI
);
712 * This function is very similar to smp_parse()
713 * in hw/core/machine.c but includes CPU die support.
715 void pc_smp_parse(MachineState
*ms
, QemuOpts
*opts
)
717 X86MachineState
*x86ms
= X86_MACHINE(ms
);
720 unsigned cpus
= qemu_opt_get_number(opts
, "cpus", 0);
721 unsigned sockets
= qemu_opt_get_number(opts
, "sockets", 0);
722 unsigned dies
= qemu_opt_get_number(opts
, "dies", 1);
723 unsigned cores
= qemu_opt_get_number(opts
, "cores", 0);
724 unsigned threads
= qemu_opt_get_number(opts
, "threads", 0);
726 /* compute missing values, prefer sockets over cores over threads */
727 if (cpus
== 0 || sockets
== 0) {
728 cores
= cores
> 0 ? cores
: 1;
729 threads
= threads
> 0 ? threads
: 1;
731 sockets
= sockets
> 0 ? sockets
: 1;
732 cpus
= cores
* threads
* dies
* sockets
;
735 qemu_opt_get_number(opts
, "maxcpus", cpus
);
736 sockets
= ms
->smp
.max_cpus
/ (cores
* threads
* dies
);
738 } else if (cores
== 0) {
739 threads
= threads
> 0 ? threads
: 1;
740 cores
= cpus
/ (sockets
* dies
* threads
);
741 cores
= cores
> 0 ? cores
: 1;
742 } else if (threads
== 0) {
743 threads
= cpus
/ (cores
* dies
* sockets
);
744 threads
= threads
> 0 ? threads
: 1;
745 } else if (sockets
* dies
* cores
* threads
< cpus
) {
746 error_report("cpu topology: "
747 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) < "
749 sockets
, dies
, cores
, threads
, cpus
);
754 qemu_opt_get_number(opts
, "maxcpus", cpus
);
756 if (ms
->smp
.max_cpus
< cpus
) {
757 error_report("maxcpus must be equal to or greater than smp");
761 if (sockets
* dies
* cores
* threads
> ms
->smp
.max_cpus
) {
762 error_report("cpu topology: "
763 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) > "
765 sockets
, dies
, cores
, threads
,
770 if (sockets
* dies
* cores
* threads
!= ms
->smp
.max_cpus
) {
771 warn_report("Invalid CPU topology deprecated: "
772 "sockets (%u) * dies (%u) * cores (%u) * threads (%u) "
774 sockets
, dies
, cores
, threads
,
779 ms
->smp
.cores
= cores
;
780 ms
->smp
.threads
= threads
;
781 x86ms
->smp_dies
= dies
;
784 if (ms
->smp
.cpus
> 1) {
785 Error
*blocker
= NULL
;
786 error_setg(&blocker
, QERR_REPLAY_NOT_SUPPORTED
, "smp");
787 replay_add_blocker(blocker
);
791 void pc_hot_add_cpu(MachineState
*ms
, const int64_t id
, Error
**errp
)
793 X86MachineState
*x86ms
= X86_MACHINE(ms
);
794 int64_t apic_id
= x86_cpu_apic_id_from_index(x86ms
, id
);
795 Error
*local_err
= NULL
;
798 error_setg(errp
, "Invalid CPU id: %" PRIi64
, id
);
802 if (apic_id
>= ACPI_CPU_HOTPLUG_ID_LIMIT
) {
803 error_setg(errp
, "Unable to add CPU: %" PRIi64
804 ", resulting APIC ID (%" PRIi64
") is too large",
810 x86_cpu_new(X86_MACHINE(ms
), apic_id
, &local_err
);
812 error_propagate(errp
, local_err
);
817 static void rtc_set_cpus_count(ISADevice
*rtc
, uint16_t cpus_count
)
819 if (cpus_count
> 0xff) {
820 /* If the number of CPUs can't be represented in 8 bits, the
821 * BIOS must use "FW_CFG_NB_CPUS". Set RTC field to 0 just
822 * to make old BIOSes fail more predictably.
824 rtc_set_memory(rtc
, 0x5f, 0);
826 rtc_set_memory(rtc
, 0x5f, cpus_count
- 1);
831 void pc_machine_done(Notifier
*notifier
, void *data
)
833 PCMachineState
*pcms
= container_of(notifier
,
834 PCMachineState
, machine_done
);
835 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
836 PCIBus
*bus
= pcms
->bus
;
838 /* set the number of CPUs */
839 rtc_set_cpus_count(x86ms
->rtc
, x86ms
->boot_cpus
);
844 QLIST_FOREACH(bus
, &bus
->child
, sibling
) {
845 /* look for expander root buses */
846 if (pci_bus_is_root(bus
)) {
850 if (extra_hosts
&& x86ms
->fw_cfg
) {
851 uint64_t *val
= g_malloc(sizeof(*val
));
852 *val
= cpu_to_le64(extra_hosts
);
853 fw_cfg_add_file(x86ms
->fw_cfg
,
854 "etc/extra-pci-roots", val
, sizeof(*val
));
860 fw_cfg_build_smbios(MACHINE(pcms
), x86ms
->fw_cfg
);
861 fw_cfg_build_feature_control(MACHINE(pcms
), x86ms
->fw_cfg
);
862 /* update FW_CFG_NB_CPUS to account for -device added CPUs */
863 fw_cfg_modify_i16(x86ms
->fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
866 if (x86ms
->apic_id_limit
> 255 && !xen_enabled()) {
867 IntelIOMMUState
*iommu
= INTEL_IOMMU_DEVICE(x86_iommu_get_default());
869 if (!iommu
|| !x86_iommu_ir_supported(X86_IOMMU_DEVICE(iommu
)) ||
870 iommu
->intr_eim
!= ON_OFF_AUTO_ON
) {
871 error_report("current -smp configuration requires "
872 "Extended Interrupt Mode enabled. "
873 "You can add an IOMMU using: "
874 "-device intel-iommu,intremap=on,eim=on");
880 void pc_guest_info_init(PCMachineState
*pcms
)
883 MachineState
*ms
= MACHINE(pcms
);
884 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
886 x86ms
->apic_xrupt_override
= kvm_allows_irq0_override();
887 pcms
->numa_nodes
= ms
->numa_state
->num_nodes
;
888 pcms
->node_mem
= g_malloc0(pcms
->numa_nodes
*
889 sizeof *pcms
->node_mem
);
890 for (i
= 0; i
< ms
->numa_state
->num_nodes
; i
++) {
891 pcms
->node_mem
[i
] = ms
->numa_state
->nodes
[i
].node_mem
;
894 pcms
->machine_done
.notify
= pc_machine_done
;
895 qemu_add_machine_init_done_notifier(&pcms
->machine_done
);
898 /* setup pci memory address space mapping into system address space */
899 void pc_pci_as_mapping_init(Object
*owner
, MemoryRegion
*system_memory
,
900 MemoryRegion
*pci_address_space
)
902 /* Set to lower priority than RAM */
903 memory_region_add_subregion_overlap(system_memory
, 0x0,
904 pci_address_space
, -1);
907 void xen_load_linux(PCMachineState
*pcms
)
911 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
912 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
914 assert(MACHINE(pcms
)->kernel_filename
!= NULL
);
916 fw_cfg
= fw_cfg_init_io(FW_CFG_IO_BASE
);
917 fw_cfg_add_i16(fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
920 x86_load_linux(x86ms
, fw_cfg
, pcmc
->acpi_data_size
,
921 pcmc
->pvh_enabled
, pcmc
->linuxboot_dma_enabled
);
922 for (i
= 0; i
< nb_option_roms
; i
++) {
923 assert(!strcmp(option_rom
[i
].name
, "linuxboot.bin") ||
924 !strcmp(option_rom
[i
].name
, "linuxboot_dma.bin") ||
925 !strcmp(option_rom
[i
].name
, "pvh.bin") ||
926 !strcmp(option_rom
[i
].name
, "multiboot.bin"));
927 rom_add_option(option_rom
[i
].name
, option_rom
[i
].bootindex
);
929 x86ms
->fw_cfg
= fw_cfg
;
932 void pc_memory_init(PCMachineState
*pcms
,
933 MemoryRegion
*system_memory
,
934 MemoryRegion
*rom_memory
,
935 MemoryRegion
**ram_memory
)
938 MemoryRegion
*ram
, *option_rom_mr
;
939 MemoryRegion
*ram_below_4g
, *ram_above_4g
;
941 MachineState
*machine
= MACHINE(pcms
);
942 MachineClass
*mc
= MACHINE_GET_CLASS(machine
);
943 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
944 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
946 assert(machine
->ram_size
== x86ms
->below_4g_mem_size
+
947 x86ms
->above_4g_mem_size
);
949 linux_boot
= (machine
->kernel_filename
!= NULL
);
951 /* Allocate RAM. We allocate it as a single memory region and use
952 * aliases to address portions of it, mostly for backwards compatibility
953 * with older qemus that used qemu_ram_alloc().
955 ram
= g_malloc(sizeof(*ram
));
956 memory_region_allocate_system_memory(ram
, NULL
, "pc.ram",
959 ram_below_4g
= g_malloc(sizeof(*ram_below_4g
));
960 memory_region_init_alias(ram_below_4g
, NULL
, "ram-below-4g", ram
,
961 0, x86ms
->below_4g_mem_size
);
962 memory_region_add_subregion(system_memory
, 0, ram_below_4g
);
963 e820_add_entry(0, x86ms
->below_4g_mem_size
, E820_RAM
);
964 if (x86ms
->above_4g_mem_size
> 0) {
965 ram_above_4g
= g_malloc(sizeof(*ram_above_4g
));
966 memory_region_init_alias(ram_above_4g
, NULL
, "ram-above-4g", ram
,
967 x86ms
->below_4g_mem_size
,
968 x86ms
->above_4g_mem_size
);
969 memory_region_add_subregion(system_memory
, 0x100000000ULL
,
971 e820_add_entry(0x100000000ULL
, x86ms
->above_4g_mem_size
, E820_RAM
);
974 if (!pcmc
->has_reserved_memory
&&
975 (machine
->ram_slots
||
976 (machine
->maxram_size
> machine
->ram_size
))) {
978 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s",
983 /* always allocate the device memory information */
984 machine
->device_memory
= g_malloc0(sizeof(*machine
->device_memory
));
986 /* initialize device memory address space */
987 if (pcmc
->has_reserved_memory
&&
988 (machine
->ram_size
< machine
->maxram_size
)) {
989 ram_addr_t device_mem_size
= machine
->maxram_size
- machine
->ram_size
;
991 if (machine
->ram_slots
> ACPI_MAX_RAM_SLOTS
) {
992 error_report("unsupported amount of memory slots: %"PRIu64
,
997 if (QEMU_ALIGN_UP(machine
->maxram_size
,
998 TARGET_PAGE_SIZE
) != machine
->maxram_size
) {
999 error_report("maximum memory size must by aligned to multiple of "
1000 "%d bytes", TARGET_PAGE_SIZE
);
1004 machine
->device_memory
->base
=
1005 ROUND_UP(0x100000000ULL
+ x86ms
->above_4g_mem_size
, 1 * GiB
);
1007 if (pcmc
->enforce_aligned_dimm
) {
1008 /* size device region assuming 1G page max alignment per slot */
1009 device_mem_size
+= (1 * GiB
) * machine
->ram_slots
;
1012 if ((machine
->device_memory
->base
+ device_mem_size
) <
1014 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT
,
1015 machine
->maxram_size
);
1019 memory_region_init(&machine
->device_memory
->mr
, OBJECT(pcms
),
1020 "device-memory", device_mem_size
);
1021 memory_region_add_subregion(system_memory
, machine
->device_memory
->base
,
1022 &machine
->device_memory
->mr
);
1025 /* Initialize PC system firmware */
1026 pc_system_firmware_init(pcms
, rom_memory
);
1028 option_rom_mr
= g_malloc(sizeof(*option_rom_mr
));
1029 memory_region_init_ram(option_rom_mr
, NULL
, "pc.rom", PC_ROM_SIZE
,
1031 if (pcmc
->pci_enabled
) {
1032 memory_region_set_readonly(option_rom_mr
, true);
1034 memory_region_add_subregion_overlap(rom_memory
,
1039 fw_cfg
= fw_cfg_arch_create(machine
,
1040 x86ms
->boot_cpus
, x86ms
->apic_id_limit
);
1044 if (pcmc
->has_reserved_memory
&& machine
->device_memory
->base
) {
1045 uint64_t *val
= g_malloc(sizeof(*val
));
1046 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1047 uint64_t res_mem_end
= machine
->device_memory
->base
;
1049 if (!pcmc
->broken_reserved_end
) {
1050 res_mem_end
+= memory_region_size(&machine
->device_memory
->mr
);
1052 *val
= cpu_to_le64(ROUND_UP(res_mem_end
, 1 * GiB
));
1053 fw_cfg_add_file(fw_cfg
, "etc/reserved-memory-end", val
, sizeof(*val
));
1057 x86_load_linux(x86ms
, fw_cfg
, pcmc
->acpi_data_size
,
1058 pcmc
->pvh_enabled
, pcmc
->linuxboot_dma_enabled
);
1061 for (i
= 0; i
< nb_option_roms
; i
++) {
1062 rom_add_option(option_rom
[i
].name
, option_rom
[i
].bootindex
);
1064 x86ms
->fw_cfg
= fw_cfg
;
1066 /* Init default IOAPIC address space */
1067 x86ms
->ioapic_as
= &address_space_memory
;
1069 /* Init ACPI memory hotplug IO base address */
1070 pcms
->memhp_io_base
= ACPI_MEMORY_HOTPLUG_BASE
;
1074 * The 64bit pci hole starts after "above 4G RAM" and
1075 * potentially the space reserved for memory hotplug.
1077 uint64_t pc_pci_hole64_start(void)
1079 PCMachineState
*pcms
= PC_MACHINE(qdev_get_machine());
1080 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1081 MachineState
*ms
= MACHINE(pcms
);
1082 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1083 uint64_t hole64_start
= 0;
1085 if (pcmc
->has_reserved_memory
&& ms
->device_memory
->base
) {
1086 hole64_start
= ms
->device_memory
->base
;
1087 if (!pcmc
->broken_reserved_end
) {
1088 hole64_start
+= memory_region_size(&ms
->device_memory
->mr
);
1091 hole64_start
= 0x100000000ULL
+ x86ms
->above_4g_mem_size
;
1094 return ROUND_UP(hole64_start
, 1 * GiB
);
1097 DeviceState
*pc_vga_init(ISABus
*isa_bus
, PCIBus
*pci_bus
)
1099 DeviceState
*dev
= NULL
;
1101 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA
);
1103 PCIDevice
*pcidev
= pci_vga_init(pci_bus
);
1104 dev
= pcidev
? &pcidev
->qdev
: NULL
;
1105 } else if (isa_bus
) {
1106 ISADevice
*isadev
= isa_vga_init(isa_bus
);
1107 dev
= isadev
? DEVICE(isadev
) : NULL
;
1109 rom_reset_order_override();
1113 static const MemoryRegionOps ioport80_io_ops
= {
1114 .write
= ioport80_write
,
1115 .read
= ioport80_read
,
1116 .endianness
= DEVICE_NATIVE_ENDIAN
,
1118 .min_access_size
= 1,
1119 .max_access_size
= 1,
1123 static const MemoryRegionOps ioportF0_io_ops
= {
1124 .write
= ioportF0_write
,
1125 .read
= ioportF0_read
,
1126 .endianness
= DEVICE_NATIVE_ENDIAN
,
1128 .min_access_size
= 1,
1129 .max_access_size
= 1,
1133 static void pc_superio_init(ISABus
*isa_bus
, bool create_fdctrl
, bool no_vmport
)
1136 DriveInfo
*fd
[MAX_FD
];
1138 ISADevice
*i8042
, *port92
, *vmmouse
;
1140 serial_hds_isa_init(isa_bus
, 0, MAX_ISA_SERIAL_PORTS
);
1141 parallel_hds_isa_init(isa_bus
, MAX_PARALLEL_PORTS
);
1143 for (i
= 0; i
< MAX_FD
; i
++) {
1144 fd
[i
] = drive_get(IF_FLOPPY
, 0, i
);
1145 create_fdctrl
|= !!fd
[i
];
1147 if (create_fdctrl
) {
1148 fdctrl_init_isa(isa_bus
, fd
);
1151 i8042
= isa_create_simple(isa_bus
, "i8042");
1153 vmport_init(isa_bus
);
1154 vmmouse
= isa_try_create(isa_bus
, "vmmouse");
1159 object_property_set_link(OBJECT(vmmouse
), OBJECT(i8042
),
1160 "i8042", &error_abort
);
1161 qdev_init_nofail(DEVICE(vmmouse
));
1163 port92
= isa_create_simple(isa_bus
, TYPE_PORT92
);
1165 a20_line
= qemu_allocate_irqs(handle_a20_line_change
, first_cpu
, 2);
1166 i8042_setup_a20_line(i8042
, a20_line
[0]);
1167 qdev_connect_gpio_out_named(DEVICE(port92
),
1168 PORT92_A20_LINE
, 0, a20_line
[1]);
1172 void pc_basic_device_init(ISABus
*isa_bus
, qemu_irq
*gsi
,
1173 ISADevice
**rtc_state
,
1180 DeviceState
*hpet
= NULL
;
1181 int pit_isa_irq
= 0;
1182 qemu_irq pit_alt_irq
= NULL
;
1183 qemu_irq rtc_irq
= NULL
;
1184 ISADevice
*pit
= NULL
;
1185 MemoryRegion
*ioport80_io
= g_new(MemoryRegion
, 1);
1186 MemoryRegion
*ioportF0_io
= g_new(MemoryRegion
, 1);
1188 memory_region_init_io(ioport80_io
, NULL
, &ioport80_io_ops
, NULL
, "ioport80", 1);
1189 memory_region_add_subregion(isa_bus
->address_space_io
, 0x80, ioport80_io
);
1191 memory_region_init_io(ioportF0_io
, NULL
, &ioportF0_io_ops
, NULL
, "ioportF0", 1);
1192 memory_region_add_subregion(isa_bus
->address_space_io
, 0xf0, ioportF0_io
);
1195 * Check if an HPET shall be created.
1197 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
1198 * when the HPET wants to take over. Thus we have to disable the latter.
1200 if (!no_hpet
&& (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) {
1201 hpet
= qdev_try_create(NULL
, TYPE_HPET
);
1203 /* For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7
1204 * and earlier, use IRQ2 for compat. Otherwise, use IRQ16~23,
1207 uint8_t compat
= object_property_get_uint(OBJECT(hpet
),
1210 qdev_prop_set_uint32(hpet
, HPET_INTCAP
, hpet_irqs
);
1212 qdev_init_nofail(hpet
);
1213 sysbus_mmio_map(SYS_BUS_DEVICE(hpet
), 0, HPET_BASE
);
1215 for (i
= 0; i
< GSI_NUM_PINS
; i
++) {
1216 sysbus_connect_irq(SYS_BUS_DEVICE(hpet
), i
, gsi
[i
]);
1219 pit_alt_irq
= qdev_get_gpio_in(hpet
, HPET_LEGACY_PIT_INT
);
1220 rtc_irq
= qdev_get_gpio_in(hpet
, HPET_LEGACY_RTC_INT
);
1223 *rtc_state
= mc146818_rtc_init(isa_bus
, 2000, rtc_irq
);
1225 qemu_register_boot_set(pc_boot_set
, *rtc_state
);
1227 if (!xen_enabled() && has_pit
) {
1228 if (kvm_pit_in_kernel()) {
1229 pit
= kvm_pit_init(isa_bus
, 0x40);
1231 pit
= i8254_pit_init(isa_bus
, 0x40, pit_isa_irq
, pit_alt_irq
);
1234 /* connect PIT to output control line of the HPET */
1235 qdev_connect_gpio_out(hpet
, 0, qdev_get_gpio_in(DEVICE(pit
), 0));
1237 pcspk_init(isa_bus
, pit
);
1240 i8257_dma_init(isa_bus
, 0);
1243 pc_superio_init(isa_bus
, create_fdctrl
, no_vmport
);
1246 void pc_nic_init(PCMachineClass
*pcmc
, ISABus
*isa_bus
, PCIBus
*pci_bus
)
1250 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC
);
1251 for (i
= 0; i
< nb_nics
; i
++) {
1252 NICInfo
*nd
= &nd_table
[i
];
1253 const char *model
= nd
->model
? nd
->model
: pcmc
->default_nic_model
;
1255 if (g_str_equal(model
, "ne2k_isa")) {
1256 pc_init_ne2k_isa(isa_bus
, nd
);
1258 pci_nic_init_nofail(nd
, pci_bus
, model
, NULL
);
1261 rom_reset_order_override();
1264 void pc_i8259_create(ISABus
*isa_bus
, qemu_irq
*i8259_irqs
)
1268 if (kvm_pic_in_kernel()) {
1269 i8259
= kvm_i8259_init(isa_bus
);
1270 } else if (xen_enabled()) {
1271 i8259
= xen_interrupt_controller_init();
1273 i8259
= i8259_init(isa_bus
, x86_allocate_cpu_irq());
1276 for (size_t i
= 0; i
< ISA_NUM_IRQS
; i
++) {
1277 i8259_irqs
[i
] = i8259
[i
];
1283 static void pc_memory_pre_plug(HotplugHandler
*hotplug_dev
, DeviceState
*dev
,
1286 const PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1287 const PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1288 const MachineState
*ms
= MACHINE(hotplug_dev
);
1289 const bool is_nvdimm
= object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
);
1290 const uint64_t legacy_align
= TARGET_PAGE_SIZE
;
1291 Error
*local_err
= NULL
;
1294 * When -no-acpi is used with Q35 machine type, no ACPI is built,
1295 * but pcms->acpi_dev is still created. Check !acpi_enabled in
1296 * addition to cover this case.
1298 if (!pcms
->acpi_dev
|| !acpi_enabled
) {
1300 "memory hotplug is not enabled: missing acpi device or acpi disabled");
1304 if (is_nvdimm
&& !ms
->nvdimms_state
->is_enabled
) {
1305 error_setg(errp
, "nvdimm is not enabled: missing 'nvdimm' in '-M'");
1309 hotplug_handler_pre_plug(pcms
->acpi_dev
, dev
, &local_err
);
1311 error_propagate(errp
, local_err
);
1315 pc_dimm_pre_plug(PC_DIMM(dev
), MACHINE(hotplug_dev
),
1316 pcmc
->enforce_aligned_dimm
? NULL
: &legacy_align
, errp
);
1319 static void pc_memory_plug(HotplugHandler
*hotplug_dev
,
1320 DeviceState
*dev
, Error
**errp
)
1322 Error
*local_err
= NULL
;
1323 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1324 MachineState
*ms
= MACHINE(hotplug_dev
);
1325 bool is_nvdimm
= object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
);
1327 pc_dimm_plug(PC_DIMM(dev
), MACHINE(pcms
), &local_err
);
1333 nvdimm_plug(ms
->nvdimms_state
);
1336 hotplug_handler_plug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &error_abort
);
1338 error_propagate(errp
, local_err
);
1341 static void pc_memory_unplug_request(HotplugHandler
*hotplug_dev
,
1342 DeviceState
*dev
, Error
**errp
)
1344 Error
*local_err
= NULL
;
1345 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1348 * When -no-acpi is used with Q35 machine type, no ACPI is built,
1349 * but pcms->acpi_dev is still created. Check !acpi_enabled in
1350 * addition to cover this case.
1352 if (!pcms
->acpi_dev
|| !acpi_enabled
) {
1353 error_setg(&local_err
,
1354 "memory hotplug is not enabled: missing acpi device or acpi disabled");
1358 if (object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
)) {
1359 error_setg(&local_err
,
1360 "nvdimm device hot unplug is not supported yet.");
1364 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
,
1367 error_propagate(errp
, local_err
);
1370 static void pc_memory_unplug(HotplugHandler
*hotplug_dev
,
1371 DeviceState
*dev
, Error
**errp
)
1373 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1374 Error
*local_err
= NULL
;
1376 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &local_err
);
1381 pc_dimm_unplug(PC_DIMM(dev
), MACHINE(pcms
));
1382 object_property_set_bool(OBJECT(dev
), false, "realized", NULL
);
1384 error_propagate(errp
, local_err
);
1387 static int pc_apic_cmp(const void *a
, const void *b
)
1389 CPUArchId
*apic_a
= (CPUArchId
*)a
;
1390 CPUArchId
*apic_b
= (CPUArchId
*)b
;
1392 return apic_a
->arch_id
- apic_b
->arch_id
;
1395 /* returns pointer to CPUArchId descriptor that matches CPU's apic_id
1396 * in ms->possible_cpus->cpus, if ms->possible_cpus->cpus has no
1397 * entry corresponding to CPU's apic_id returns NULL.
1399 static CPUArchId
*pc_find_cpu_slot(MachineState
*ms
, uint32_t id
, int *idx
)
1401 CPUArchId apic_id
, *found_cpu
;
1403 apic_id
.arch_id
= id
;
1404 found_cpu
= bsearch(&apic_id
, ms
->possible_cpus
->cpus
,
1405 ms
->possible_cpus
->len
, sizeof(*ms
->possible_cpus
->cpus
),
1407 if (found_cpu
&& idx
) {
1408 *idx
= found_cpu
- ms
->possible_cpus
->cpus
;
1413 static void pc_cpu_plug(HotplugHandler
*hotplug_dev
,
1414 DeviceState
*dev
, Error
**errp
)
1416 CPUArchId
*found_cpu
;
1417 Error
*local_err
= NULL
;
1418 X86CPU
*cpu
= X86_CPU(dev
);
1419 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1420 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1422 if (pcms
->acpi_dev
) {
1423 hotplug_handler_plug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &local_err
);
1429 /* increment the number of CPUs */
1432 rtc_set_cpus_count(x86ms
->rtc
, x86ms
->boot_cpus
);
1434 if (x86ms
->fw_cfg
) {
1435 fw_cfg_modify_i16(x86ms
->fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
1438 found_cpu
= pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, NULL
);
1439 found_cpu
->cpu
= OBJECT(dev
);
1441 error_propagate(errp
, local_err
);
1443 static void pc_cpu_unplug_request_cb(HotplugHandler
*hotplug_dev
,
1444 DeviceState
*dev
, Error
**errp
)
1447 Error
*local_err
= NULL
;
1448 X86CPU
*cpu
= X86_CPU(dev
);
1449 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1451 if (!pcms
->acpi_dev
) {
1452 error_setg(&local_err
, "CPU hot unplug not supported without ACPI");
1456 pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, &idx
);
1459 error_setg(&local_err
, "Boot CPU is unpluggable");
1463 hotplug_handler_unplug_request(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
,
1470 error_propagate(errp
, local_err
);
1474 static void pc_cpu_unplug_cb(HotplugHandler
*hotplug_dev
,
1475 DeviceState
*dev
, Error
**errp
)
1477 CPUArchId
*found_cpu
;
1478 Error
*local_err
= NULL
;
1479 X86CPU
*cpu
= X86_CPU(dev
);
1480 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1481 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1483 hotplug_handler_unplug(HOTPLUG_HANDLER(pcms
->acpi_dev
), dev
, &local_err
);
1488 found_cpu
= pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, NULL
);
1489 found_cpu
->cpu
= NULL
;
1490 object_property_set_bool(OBJECT(dev
), false, "realized", NULL
);
1492 /* decrement the number of CPUs */
1494 /* Update the number of CPUs in CMOS */
1495 rtc_set_cpus_count(x86ms
->rtc
, x86ms
->boot_cpus
);
1496 fw_cfg_modify_i16(x86ms
->fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
1498 error_propagate(errp
, local_err
);
1501 static void pc_cpu_pre_plug(HotplugHandler
*hotplug_dev
,
1502 DeviceState
*dev
, Error
**errp
)
1506 CPUArchId
*cpu_slot
;
1507 X86CPUTopoInfo topo
;
1508 X86CPU
*cpu
= X86_CPU(dev
);
1509 CPUX86State
*env
= &cpu
->env
;
1510 MachineState
*ms
= MACHINE(hotplug_dev
);
1511 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1512 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1513 unsigned int smp_cores
= ms
->smp
.cores
;
1514 unsigned int smp_threads
= ms
->smp
.threads
;
1516 if(!object_dynamic_cast(OBJECT(cpu
), ms
->cpu_type
)) {
1517 error_setg(errp
, "Invalid CPU type, expected cpu type: '%s'",
1522 env
->nr_dies
= x86ms
->smp_dies
;
1525 * If APIC ID is not set,
1526 * set it based on socket/die/core/thread properties.
1528 if (cpu
->apic_id
== UNASSIGNED_APIC_ID
) {
1529 int max_socket
= (ms
->smp
.max_cpus
- 1) /
1530 smp_threads
/ smp_cores
/ x86ms
->smp_dies
;
1533 * die-id was optional in QEMU 4.0 and older, so keep it optional
1534 * if there's only one die per socket.
1536 if (cpu
->die_id
< 0 && x86ms
->smp_dies
== 1) {
1540 if (cpu
->socket_id
< 0) {
1541 error_setg(errp
, "CPU socket-id is not set");
1543 } else if (cpu
->socket_id
> max_socket
) {
1544 error_setg(errp
, "Invalid CPU socket-id: %u must be in range 0:%u",
1545 cpu
->socket_id
, max_socket
);
1548 if (cpu
->die_id
< 0) {
1549 error_setg(errp
, "CPU die-id is not set");
1551 } else if (cpu
->die_id
> x86ms
->smp_dies
- 1) {
1552 error_setg(errp
, "Invalid CPU die-id: %u must be in range 0:%u",
1553 cpu
->die_id
, x86ms
->smp_dies
- 1);
1556 if (cpu
->core_id
< 0) {
1557 error_setg(errp
, "CPU core-id is not set");
1559 } else if (cpu
->core_id
> (smp_cores
- 1)) {
1560 error_setg(errp
, "Invalid CPU core-id: %u must be in range 0:%u",
1561 cpu
->core_id
, smp_cores
- 1);
1564 if (cpu
->thread_id
< 0) {
1565 error_setg(errp
, "CPU thread-id is not set");
1567 } else if (cpu
->thread_id
> (smp_threads
- 1)) {
1568 error_setg(errp
, "Invalid CPU thread-id: %u must be in range 0:%u",
1569 cpu
->thread_id
, smp_threads
- 1);
1573 topo
.pkg_id
= cpu
->socket_id
;
1574 topo
.die_id
= cpu
->die_id
;
1575 topo
.core_id
= cpu
->core_id
;
1576 topo
.smt_id
= cpu
->thread_id
;
1577 cpu
->apic_id
= apicid_from_topo_ids(x86ms
->smp_dies
, smp_cores
,
1578 smp_threads
, &topo
);
1581 cpu_slot
= pc_find_cpu_slot(MACHINE(pcms
), cpu
->apic_id
, &idx
);
1583 MachineState
*ms
= MACHINE(pcms
);
1585 x86_topo_ids_from_apicid(cpu
->apic_id
, x86ms
->smp_dies
,
1586 smp_cores
, smp_threads
, &topo
);
1588 "Invalid CPU [socket: %u, die: %u, core: %u, thread: %u] with"
1589 " APIC ID %" PRIu32
", valid index range 0:%d",
1590 topo
.pkg_id
, topo
.die_id
, topo
.core_id
, topo
.smt_id
,
1591 cpu
->apic_id
, ms
->possible_cpus
->len
- 1);
1595 if (cpu_slot
->cpu
) {
1596 error_setg(errp
, "CPU[%d] with APIC ID %" PRIu32
" exists",
1601 /* if 'address' properties socket-id/core-id/thread-id are not set, set them
1602 * so that machine_query_hotpluggable_cpus would show correct values
1604 /* TODO: move socket_id/core_id/thread_id checks into x86_cpu_realizefn()
1605 * once -smp refactoring is complete and there will be CPU private
1606 * CPUState::nr_cores and CPUState::nr_threads fields instead of globals */
1607 x86_topo_ids_from_apicid(cpu
->apic_id
, x86ms
->smp_dies
,
1608 smp_cores
, smp_threads
, &topo
);
1609 if (cpu
->socket_id
!= -1 && cpu
->socket_id
!= topo
.pkg_id
) {
1610 error_setg(errp
, "property socket-id: %u doesn't match set apic-id:"
1611 " 0x%x (socket-id: %u)", cpu
->socket_id
, cpu
->apic_id
, topo
.pkg_id
);
1614 cpu
->socket_id
= topo
.pkg_id
;
1616 if (cpu
->die_id
!= -1 && cpu
->die_id
!= topo
.die_id
) {
1617 error_setg(errp
, "property die-id: %u doesn't match set apic-id:"
1618 " 0x%x (die-id: %u)", cpu
->die_id
, cpu
->apic_id
, topo
.die_id
);
1621 cpu
->die_id
= topo
.die_id
;
1623 if (cpu
->core_id
!= -1 && cpu
->core_id
!= topo
.core_id
) {
1624 error_setg(errp
, "property core-id: %u doesn't match set apic-id:"
1625 " 0x%x (core-id: %u)", cpu
->core_id
, cpu
->apic_id
, topo
.core_id
);
1628 cpu
->core_id
= topo
.core_id
;
1630 if (cpu
->thread_id
!= -1 && cpu
->thread_id
!= topo
.smt_id
) {
1631 error_setg(errp
, "property thread-id: %u doesn't match set apic-id:"
1632 " 0x%x (thread-id: %u)", cpu
->thread_id
, cpu
->apic_id
, topo
.smt_id
);
1635 cpu
->thread_id
= topo
.smt_id
;
1637 if (hyperv_feat_enabled(cpu
, HYPERV_FEAT_VPINDEX
) &&
1638 !kvm_hv_vpindex_settable()) {
1639 error_setg(errp
, "kernel doesn't allow setting HyperV VP_INDEX");
1644 cs
->cpu_index
= idx
;
1646 numa_cpu_pre_plug(cpu_slot
, dev
, errp
);
1649 static void pc_virtio_pmem_pci_pre_plug(HotplugHandler
*hotplug_dev
,
1650 DeviceState
*dev
, Error
**errp
)
1652 HotplugHandler
*hotplug_dev2
= qdev_get_bus_hotplug_handler(dev
);
1653 Error
*local_err
= NULL
;
1655 if (!hotplug_dev2
) {
1657 * Without a bus hotplug handler, we cannot control the plug/unplug
1658 * order. This should never be the case on x86, however better add
1661 error_setg(errp
, "virtio-pmem-pci not supported on this bus.");
1665 * First, see if we can plug this memory device at all. If that
1666 * succeeds, branch of to the actual hotplug handler.
1668 memory_device_pre_plug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
), NULL
,
1671 hotplug_handler_pre_plug(hotplug_dev2
, dev
, &local_err
);
1673 error_propagate(errp
, local_err
);
1676 static void pc_virtio_pmem_pci_plug(HotplugHandler
*hotplug_dev
,
1677 DeviceState
*dev
, Error
**errp
)
1679 HotplugHandler
*hotplug_dev2
= qdev_get_bus_hotplug_handler(dev
);
1680 Error
*local_err
= NULL
;
1683 * Plug the memory device first and then branch off to the actual
1684 * hotplug handler. If that one fails, we can easily undo the memory
1687 memory_device_plug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
));
1688 hotplug_handler_plug(hotplug_dev2
, dev
, &local_err
);
1690 memory_device_unplug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
));
1692 error_propagate(errp
, local_err
);
1695 static void pc_virtio_pmem_pci_unplug_request(HotplugHandler
*hotplug_dev
,
1696 DeviceState
*dev
, Error
**errp
)
1698 /* We don't support virtio pmem hot unplug */
1699 error_setg(errp
, "virtio pmem device unplug not supported.");
1702 static void pc_virtio_pmem_pci_unplug(HotplugHandler
*hotplug_dev
,
1703 DeviceState
*dev
, Error
**errp
)
1705 /* We don't support virtio pmem hot unplug */
1708 static void pc_machine_device_pre_plug_cb(HotplugHandler
*hotplug_dev
,
1709 DeviceState
*dev
, Error
**errp
)
1711 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1712 pc_memory_pre_plug(hotplug_dev
, dev
, errp
);
1713 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1714 pc_cpu_pre_plug(hotplug_dev
, dev
, errp
);
1715 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
)) {
1716 pc_virtio_pmem_pci_pre_plug(hotplug_dev
, dev
, errp
);
1720 static void pc_machine_device_plug_cb(HotplugHandler
*hotplug_dev
,
1721 DeviceState
*dev
, Error
**errp
)
1723 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1724 pc_memory_plug(hotplug_dev
, dev
, errp
);
1725 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1726 pc_cpu_plug(hotplug_dev
, dev
, errp
);
1727 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
)) {
1728 pc_virtio_pmem_pci_plug(hotplug_dev
, dev
, errp
);
1732 static void pc_machine_device_unplug_request_cb(HotplugHandler
*hotplug_dev
,
1733 DeviceState
*dev
, Error
**errp
)
1735 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1736 pc_memory_unplug_request(hotplug_dev
, dev
, errp
);
1737 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1738 pc_cpu_unplug_request_cb(hotplug_dev
, dev
, errp
);
1739 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
)) {
1740 pc_virtio_pmem_pci_unplug_request(hotplug_dev
, dev
, errp
);
1742 error_setg(errp
, "acpi: device unplug request for not supported device"
1743 " type: %s", object_get_typename(OBJECT(dev
)));
1747 static void pc_machine_device_unplug_cb(HotplugHandler
*hotplug_dev
,
1748 DeviceState
*dev
, Error
**errp
)
1750 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1751 pc_memory_unplug(hotplug_dev
, dev
, errp
);
1752 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1753 pc_cpu_unplug_cb(hotplug_dev
, dev
, errp
);
1754 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
)) {
1755 pc_virtio_pmem_pci_unplug(hotplug_dev
, dev
, errp
);
1757 error_setg(errp
, "acpi: device unplug for not supported device"
1758 " type: %s", object_get_typename(OBJECT(dev
)));
1762 static HotplugHandler
*pc_get_hotplug_handler(MachineState
*machine
,
1765 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
) ||
1766 object_dynamic_cast(OBJECT(dev
), TYPE_CPU
) ||
1767 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
)) {
1768 return HOTPLUG_HANDLER(machine
);
1775 pc_machine_get_device_memory_region_size(Object
*obj
, Visitor
*v
,
1776 const char *name
, void *opaque
,
1779 MachineState
*ms
= MACHINE(obj
);
1782 if (ms
->device_memory
) {
1783 value
= memory_region_size(&ms
->device_memory
->mr
);
1786 visit_type_int(v
, name
, &value
, errp
);
1789 static void pc_machine_get_vmport(Object
*obj
, Visitor
*v
, const char *name
,
1790 void *opaque
, Error
**errp
)
1792 PCMachineState
*pcms
= PC_MACHINE(obj
);
1793 OnOffAuto vmport
= pcms
->vmport
;
1795 visit_type_OnOffAuto(v
, name
, &vmport
, errp
);
1798 static void pc_machine_set_vmport(Object
*obj
, Visitor
*v
, const char *name
,
1799 void *opaque
, Error
**errp
)
1801 PCMachineState
*pcms
= PC_MACHINE(obj
);
1803 visit_type_OnOffAuto(v
, name
, &pcms
->vmport
, errp
);
1806 static bool pc_machine_get_smbus(Object
*obj
, Error
**errp
)
1808 PCMachineState
*pcms
= PC_MACHINE(obj
);
1810 return pcms
->smbus_enabled
;
1813 static void pc_machine_set_smbus(Object
*obj
, bool value
, Error
**errp
)
1815 PCMachineState
*pcms
= PC_MACHINE(obj
);
1817 pcms
->smbus_enabled
= value
;
1820 static bool pc_machine_get_sata(Object
*obj
, Error
**errp
)
1822 PCMachineState
*pcms
= PC_MACHINE(obj
);
1824 return pcms
->sata_enabled
;
1827 static void pc_machine_set_sata(Object
*obj
, bool value
, Error
**errp
)
1829 PCMachineState
*pcms
= PC_MACHINE(obj
);
1831 pcms
->sata_enabled
= value
;
1834 static bool pc_machine_get_pit(Object
*obj
, Error
**errp
)
1836 PCMachineState
*pcms
= PC_MACHINE(obj
);
1838 return pcms
->pit_enabled
;
1841 static void pc_machine_set_pit(Object
*obj
, bool value
, Error
**errp
)
1843 PCMachineState
*pcms
= PC_MACHINE(obj
);
1845 pcms
->pit_enabled
= value
;
1848 static void pc_machine_initfn(Object
*obj
)
1850 PCMachineState
*pcms
= PC_MACHINE(obj
);
1852 #ifdef CONFIG_VMPORT
1853 pcms
->vmport
= ON_OFF_AUTO_AUTO
;
1855 pcms
->vmport
= ON_OFF_AUTO_OFF
;
1856 #endif /* CONFIG_VMPORT */
1857 /* acpi build is enabled by default if machine supports it */
1858 pcms
->acpi_build_enabled
= PC_MACHINE_GET_CLASS(pcms
)->has_acpi_build
;
1859 pcms
->smbus_enabled
= true;
1860 pcms
->sata_enabled
= true;
1861 pcms
->pit_enabled
= true;
1863 pc_system_flash_create(pcms
);
1866 static void pc_machine_reset(MachineState
*machine
)
1871 qemu_devices_reset();
1873 /* Reset APIC after devices have been reset to cancel
1874 * any changes that qemu_devices_reset() might have done.
1879 if (cpu
->apic_state
) {
1880 device_reset(cpu
->apic_state
);
1885 static void pc_machine_wakeup(MachineState
*machine
)
1887 cpu_synchronize_all_states();
1888 pc_machine_reset(machine
);
1889 cpu_synchronize_all_post_reset();
1892 static bool pc_hotplug_allowed(MachineState
*ms
, DeviceState
*dev
, Error
**errp
)
1894 X86IOMMUState
*iommu
= x86_iommu_get_default();
1895 IntelIOMMUState
*intel_iommu
;
1898 object_dynamic_cast((Object
*)iommu
, TYPE_INTEL_IOMMU_DEVICE
) &&
1899 object_dynamic_cast((Object
*)dev
, "vfio-pci")) {
1900 intel_iommu
= INTEL_IOMMU_DEVICE(iommu
);
1901 if (!intel_iommu
->caching_mode
) {
1902 error_setg(errp
, "Device assignment is not allowed without "
1903 "enabling caching-mode=on for Intel IOMMU.");
1911 static void pc_machine_class_init(ObjectClass
*oc
, void *data
)
1913 MachineClass
*mc
= MACHINE_CLASS(oc
);
1914 PCMachineClass
*pcmc
= PC_MACHINE_CLASS(oc
);
1915 HotplugHandlerClass
*hc
= HOTPLUG_HANDLER_CLASS(oc
);
1917 pcmc
->pci_enabled
= true;
1918 pcmc
->has_acpi_build
= true;
1919 pcmc
->rsdp_in_ram
= true;
1920 pcmc
->smbios_defaults
= true;
1921 pcmc
->smbios_uuid_encoded
= true;
1922 pcmc
->gigabyte_align
= true;
1923 pcmc
->has_reserved_memory
= true;
1924 pcmc
->kvmclock_enabled
= true;
1925 pcmc
->enforce_aligned_dimm
= true;
1926 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported
1927 * to be used at the moment, 32K should be enough for a while. */
1928 pcmc
->acpi_data_size
= 0x20000 + 0x8000;
1929 pcmc
->linuxboot_dma_enabled
= true;
1930 pcmc
->pvh_enabled
= true;
1931 assert(!mc
->get_hotplug_handler
);
1932 mc
->get_hotplug_handler
= pc_get_hotplug_handler
;
1933 mc
->hotplug_allowed
= pc_hotplug_allowed
;
1934 mc
->cpu_index_to_instance_props
= x86_cpu_index_to_props
;
1935 mc
->get_default_cpu_node_id
= x86_get_default_cpu_node_id
;
1936 mc
->possible_cpu_arch_ids
= x86_possible_cpu_arch_ids
;
1937 mc
->auto_enable_numa_with_memhp
= true;
1938 mc
->has_hotpluggable_cpus
= true;
1939 mc
->default_boot_order
= "cad";
1940 mc
->hot_add_cpu
= pc_hot_add_cpu
;
1941 mc
->smp_parse
= pc_smp_parse
;
1942 mc
->block_default_type
= IF_IDE
;
1944 mc
->reset
= pc_machine_reset
;
1945 mc
->wakeup
= pc_machine_wakeup
;
1946 hc
->pre_plug
= pc_machine_device_pre_plug_cb
;
1947 hc
->plug
= pc_machine_device_plug_cb
;
1948 hc
->unplug_request
= pc_machine_device_unplug_request_cb
;
1949 hc
->unplug
= pc_machine_device_unplug_cb
;
1950 mc
->default_cpu_type
= TARGET_DEFAULT_CPU_TYPE
;
1951 mc
->nvdimm_supported
= true;
1952 mc
->numa_mem_supported
= true;
1954 object_class_property_add(oc
, PC_MACHINE_DEVMEM_REGION_SIZE
, "int",
1955 pc_machine_get_device_memory_region_size
, NULL
,
1956 NULL
, NULL
, &error_abort
);
1958 object_class_property_add(oc
, PC_MACHINE_VMPORT
, "OnOffAuto",
1959 pc_machine_get_vmport
, pc_machine_set_vmport
,
1960 NULL
, NULL
, &error_abort
);
1961 object_class_property_set_description(oc
, PC_MACHINE_VMPORT
,
1962 "Enable vmport (pc & q35)", &error_abort
);
1964 object_class_property_add_bool(oc
, PC_MACHINE_SMBUS
,
1965 pc_machine_get_smbus
, pc_machine_set_smbus
, &error_abort
);
1967 object_class_property_add_bool(oc
, PC_MACHINE_SATA
,
1968 pc_machine_get_sata
, pc_machine_set_sata
, &error_abort
);
1970 object_class_property_add_bool(oc
, PC_MACHINE_PIT
,
1971 pc_machine_get_pit
, pc_machine_set_pit
, &error_abort
);
1974 static const TypeInfo pc_machine_info
= {
1975 .name
= TYPE_PC_MACHINE
,
1976 .parent
= TYPE_X86_MACHINE
,
1978 .instance_size
= sizeof(PCMachineState
),
1979 .instance_init
= pc_machine_initfn
,
1980 .class_size
= sizeof(PCMachineClass
),
1981 .class_init
= pc_machine_class_init
,
1982 .interfaces
= (InterfaceInfo
[]) {
1983 { TYPE_HOTPLUG_HANDLER
},
1988 static void pc_machine_register_types(void)
1990 type_register_static(&pc_machine_info
);
1993 type_init(pc_machine_register_types
)