include/hw/ppc/spapr.h

   1 #if !defined(__HW_SPAPR_H__)
   2 #define __HW_SPAPR_H__
   3
   4 #include "sysemu/dma.h"
   5 #include "hw/ppc/xics.h"
   6
   7 struct VIOsPAPRBus;
   8 struct sPAPRPHBState;
   9 struct sPAPRNVRAM;
  10
  11 #define HPTE64_V_HPTE_DIRTY     0x0000000000000040ULL
  12
  13 typedef struct sPAPREnvironment {
  14     struct VIOsPAPRBus *vio_bus;
  15     QLIST_HEAD(, sPAPRPHBState) phbs;
  16     hwaddr msi_win_addr;
  17     MemoryRegion msiwindow;
  18     struct sPAPRNVRAM *nvram;
  19     XICSState *icp;
  20
  21     hwaddr ram_limit;
  22     void *htab;
  23     uint32_t htab_shift;
  24     hwaddr rma_size;
  25     int vrma_adjust;
  26     hwaddr fdt_addr, rtas_addr;
  27     long rtas_size;
  28     void *fdt_skel;
  29     target_ulong entry_point;
  30     uint32_t next_irq;
  31     uint64_t rtc_offset;
  32     char *cpu_model;
  33     bool has_graphics;
  34
  35     uint32_t epow_irq;
  36     Notifier epow_notifier;
  37
  38     /* Migration state */
  39     int htab_save_index;
  40     bool htab_first_pass;
  41     int htab_fd;
  42 } sPAPREnvironment;
  43
  44 #define H_SUCCESS         0
  45 #define H_BUSY            1        /* Hardware busy -- retry later */
  46 #define H_CLOSED          2        /* Resource closed */
  47 #define H_NOT_AVAILABLE   3
  48 #define H_CONSTRAINED     4        /* Resource request constrained to max allowed */
  49 #define H_PARTIAL         5
  50 #define H_IN_PROGRESS     14       /* Kind of like busy */
  51 #define H_PAGE_REGISTERED 15
  52 #define H_PARTIAL_STORE   16
  53 #define H_PENDING         17       /* returned from H_POLL_PENDING */
  54 #define H_CONTINUE        18       /* Returned from H_Join on success */
  55 #define H_LONG_BUSY_START_RANGE         9900  /* Start of long busy range */
  56 #define H_LONG_BUSY_ORDER_1_MSEC        9900  /* Long busy, hint that 1msec \
  57                                                  is a good time to retry */
  58 #define H_LONG_BUSY_ORDER_10_MSEC       9901  /* Long busy, hint that 10msec \
  59                                                  is a good time to retry */
  60 #define H_LONG_BUSY_ORDER_100_MSEC      9902  /* Long busy, hint that 100msec \
  61                                                  is a good time to retry */
  62 #define H_LONG_BUSY_ORDER_1_SEC         9903  /* Long busy, hint that 1sec \
  63                                                  is a good time to retry */
  64 #define H_LONG_BUSY_ORDER_10_SEC        9904  /* Long busy, hint that 10sec \
  65                                                  is a good time to retry */
  66 #define H_LONG_BUSY_ORDER_100_SEC       9905  /* Long busy, hint that 100sec \
  67                                                  is a good time to retry */
  68 #define H_LONG_BUSY_END_RANGE           9905  /* End of long busy range */
  69 #define H_HARDWARE        -1       /* Hardware error */
  70 #define H_FUNCTION        -2       /* Function not supported */
  71 #define H_PRIVILEGE       -3       /* Caller not privileged */
  72 #define H_PARAMETER       -4       /* Parameter invalid, out-of-range or conflicting */
  73 #define H_BAD_MODE        -5       /* Illegal msr value */
  74 #define H_PTEG_FULL       -6       /* PTEG is full */
  75 #define H_NOT_FOUND       -7       /* PTE was not found" */
  76 #define H_RESERVED_DABR   -8       /* DABR address is reserved by the hypervisor on this processor" */
  77 #define H_NO_MEM          -9
  78 #define H_AUTHORITY       -10
  79 #define H_PERMISSION      -11
  80 #define H_DROPPED         -12
  81 #define H_SOURCE_PARM     -13
  82 #define H_DEST_PARM       -14
  83 #define H_REMOTE_PARM     -15
  84 #define H_RESOURCE        -16
  85 #define H_ADAPTER_PARM    -17
  86 #define H_RH_PARM         -18
  87 #define H_RCQ_PARM        -19
  88 #define H_SCQ_PARM        -20
  89 #define H_EQ_PARM         -21
  90 #define H_RT_PARM         -22
  91 #define H_ST_PARM         -23
  92 #define H_SIGT_PARM       -24
  93 #define H_TOKEN_PARM      -25
  94 #define H_MLENGTH_PARM    -27
  95 #define H_MEM_PARM        -28
  96 #define H_MEM_ACCESS_PARM -29
  97 #define H_ATTR_PARM       -30
  98 #define H_PORT_PARM       -31
  99 #define H_MCG_PARM        -32
 100 #define H_VL_PARM         -33
 101 #define H_TSIZE_PARM      -34
 102 #define H_TRACE_PARM      -35
 103
 104 #define H_MASK_PARM       -37
 105 #define H_MCG_FULL        -38
 106 #define H_ALIAS_EXIST     -39
 107 #define H_P_COUNTER       -40
 108 #define H_TABLE_FULL      -41
 109 #define H_ALT_TABLE       -42
 110 #define H_MR_CONDITION    -43
 111 #define H_NOT_ENOUGH_RESOURCES -44
 112 #define H_R_STATE         -45
 113 #define H_RESCINDEND      -46
 114 #define H_P2              -55
 115 #define H_P3              -56
 116 #define H_P4              -57
 117 #define H_P5              -58
 118 #define H_P6              -59
 119 #define H_P7              -60
 120 #define H_P8              -61
 121 #define H_P9              -62
 122 #define H_UNSUPPORTED_FLAG -256
 123 #define H_MULTI_THREADS_ACTIVE -9005
 124
 125
 126 /* Long Busy is a condition that can be returned by the firmware
 127  * when a call cannot be completed now, but the identical call
 128  * should be retried later.  This prevents calls blocking in the
 129  * firmware for long periods of time.  Annoyingly the firmware can return
 130  * a range of return codes, hinting at how long we should wait before
 131  * retrying.  If you don't care for the hint, the macro below is a good
 132  * way to check for the long_busy return codes
 133  */
 134 #define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
 135                             && (x <= H_LONG_BUSY_END_RANGE))
 136
 137 /* Flags */
 138 #define H_LARGE_PAGE      (1ULL<<(63-16))
 139 #define H_EXACT           (1ULL<<(63-24))       /* Use exact PTE or return H_PTEG_FULL */
 140 #define H_R_XLATE         (1ULL<<(63-25))       /* include a valid logical page num in the pte if the valid bit is set */
 141 #define H_READ_4          (1ULL<<(63-26))       /* Return 4 PTEs */
 142 #define H_PAGE_STATE_CHANGE (1ULL<<(63-28))
 143 #define H_PAGE_UNUSED     ((1ULL<<(63-29)) | (1ULL<<(63-30)))
 144 #define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
 145 #define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1ULL<<(63-31)))
 146 #define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE
 147 #define H_AVPN            (1ULL<<(63-32))       /* An avpn is provided as a sanity test */
 148 #define H_ANDCOND         (1ULL<<(63-33))
 149 #define H_ICACHE_INVALIDATE (1ULL<<(63-40))     /* icbi, etc.  (ignored for IO pages) */
 150 #define H_ICACHE_SYNCHRONIZE (1ULL<<(63-41))    /* dcbst, icbi, etc (ignored for IO pages */
 151 #define H_ZERO_PAGE       (1ULL<<(63-48))       /* zero the page before mapping (ignored for IO pages) */
 152 #define H_COPY_PAGE       (1ULL<<(63-49))
 153 #define H_N               (1ULL<<(63-61))
 154 #define H_PP1             (1ULL<<(63-62))
 155 #define H_PP2             (1ULL<<(63-63))
 156
 157 /* H_SET_MODE flags */
 158 #define H_SET_MODE_ENDIAN        4
 159 #define H_SET_MODE_ENDIAN_BIG    0
 160 #define H_SET_MODE_ENDIAN_LITTLE 1
 161
 162 /* VASI States */
 163 #define H_VASI_INVALID    0
 164 #define H_VASI_ENABLED    1
 165 #define H_VASI_ABORTED    2
 166 #define H_VASI_SUSPENDING 3
 167 #define H_VASI_SUSPENDED  4
 168 #define H_VASI_RESUMED    5
 169 #define H_VASI_COMPLETED  6
 170
 171 /* DABRX flags */
 172 #define H_DABRX_HYPERVISOR (1ULL<<(63-61))
 173 #define H_DABRX_KERNEL     (1ULL<<(63-62))
 174 #define H_DABRX_USER       (1ULL<<(63-63))
 175
 176 /* Each control block has to be on a 4K boundary */
 177 #define H_CB_ALIGNMENT     4096
 178
 179 /* pSeries hypervisor opcodes */
 180 #define H_REMOVE                0x04
 181 #define H_ENTER                 0x08
 182 #define H_READ                  0x0c
 183 #define H_CLEAR_MOD             0x10
 184 #define H_CLEAR_REF             0x14
 185 #define H_PROTECT               0x18
 186 #define H_GET_TCE               0x1c
 187 #define H_PUT_TCE               0x20
 188 #define H_SET_SPRG0             0x24
 189 #define H_SET_DABR              0x28
 190 #define H_PAGE_INIT             0x2c
 191 #define H_SET_ASR               0x30
 192 #define H_ASR_ON                0x34
 193 #define H_ASR_OFF               0x38
 194 #define H_LOGICAL_CI_LOAD       0x3c
 195 #define H_LOGICAL_CI_STORE      0x40
 196 #define H_LOGICAL_CACHE_LOAD    0x44
 197 #define H_LOGICAL_CACHE_STORE   0x48
 198 #define H_LOGICAL_ICBI          0x4c
 199 #define H_LOGICAL_DCBF          0x50
 200 #define H_GET_TERM_CHAR         0x54
 201 #define H_PUT_TERM_CHAR         0x58
 202 #define H_REAL_TO_LOGICAL       0x5c
 203 #define H_HYPERVISOR_DATA       0x60
 204 #define H_EOI                   0x64
 205 #define H_CPPR                  0x68
 206 #define H_IPI                   0x6c
 207 #define H_IPOLL                 0x70
 208 #define H_XIRR                  0x74
 209 #define H_PERFMON               0x7c
 210 #define H_MIGRATE_DMA           0x78
 211 #define H_REGISTER_VPA          0xDC
 212 #define H_CEDE                  0xE0
 213 #define H_CONFER                0xE4
 214 #define H_PROD                  0xE8
 215 #define H_GET_PPP               0xEC
 216 #define H_SET_PPP               0xF0
 217 #define H_PURR                  0xF4
 218 #define H_PIC                   0xF8
 219 #define H_REG_CRQ               0xFC
 220 #define H_FREE_CRQ              0x100
 221 #define H_VIO_SIGNAL            0x104
 222 #define H_SEND_CRQ              0x108
 223 #define H_COPY_RDMA             0x110
 224 #define H_REGISTER_LOGICAL_LAN  0x114
 225 #define H_FREE_LOGICAL_LAN      0x118
 226 #define H_ADD_LOGICAL_LAN_BUFFER 0x11C
 227 #define H_SEND_LOGICAL_LAN      0x120
 228 #define H_BULK_REMOVE           0x124
 229 #define H_MULTICAST_CTRL        0x130
 230 #define H_SET_XDABR             0x134
 231 #define H_STUFF_TCE             0x138
 232 #define H_PUT_TCE_INDIRECT      0x13C
 233 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C
 234 #define H_VTERM_PARTNER_INFO    0x150
 235 #define H_REGISTER_VTERM        0x154
 236 #define H_FREE_VTERM            0x158
 237 #define H_RESET_EVENTS          0x15C
 238 #define H_ALLOC_RESOURCE        0x160
 239 #define H_FREE_RESOURCE         0x164
 240 #define H_MODIFY_QP             0x168
 241 #define H_QUERY_QP              0x16C
 242 #define H_REREGISTER_PMR        0x170
 243 #define H_REGISTER_SMR          0x174
 244 #define H_QUERY_MR              0x178
 245 #define H_QUERY_MW              0x17C
 246 #define H_QUERY_HCA             0x180
 247 #define H_QUERY_PORT            0x184
 248 #define H_MODIFY_PORT           0x188
 249 #define H_DEFINE_AQP1           0x18C
 250 #define H_GET_TRACE_BUFFER      0x190
 251 #define H_DEFINE_AQP0           0x194
 252 #define H_RESIZE_MR             0x198
 253 #define H_ATTACH_MCQP           0x19C
 254 #define H_DETACH_MCQP           0x1A0
 255 #define H_CREATE_RPT            0x1A4
 256 #define H_REMOVE_RPT            0x1A8
 257 #define H_REGISTER_RPAGES       0x1AC
 258 #define H_DISABLE_AND_GETC      0x1B0
 259 #define H_ERROR_DATA            0x1B4
 260 #define H_GET_HCA_INFO          0x1B8
 261 #define H_GET_PERF_COUNT        0x1BC
 262 #define H_MANAGE_TRACE          0x1C0
 263 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
 264 #define H_QUERY_INT_STATE       0x1E4
 265 #define H_POLL_PENDING          0x1D8
 266 #define H_ILLAN_ATTRIBUTES      0x244
 267 #define H_MODIFY_HEA_QP         0x250
 268 #define H_QUERY_HEA_QP          0x254
 269 #define H_QUERY_HEA             0x258
 270 #define H_QUERY_HEA_PORT        0x25C
 271 #define H_MODIFY_HEA_PORT       0x260
 272 #define H_REG_BCMC              0x264
 273 #define H_DEREG_BCMC            0x268
 274 #define H_REGISTER_HEA_RPAGES   0x26C
 275 #define H_DISABLE_AND_GET_HEA   0x270
 276 #define H_GET_HEA_INFO          0x274
 277 #define H_ALLOC_HEA_RESOURCE    0x278
 278 #define H_ADD_CONN              0x284
 279 #define H_DEL_CONN              0x288
 280 #define H_JOIN                  0x298
 281 #define H_VASI_STATE            0x2A4
 282 #define H_ENABLE_CRQ            0x2B0
 283 #define H_GET_EM_PARMS          0x2B8
 284 #define H_SET_MPP               0x2D0
 285 #define H_GET_MPP               0x2D4
 286 #define H_SET_MODE              0x31C
 287 #define MAX_HCALL_OPCODE        H_SET_MODE
 288
 289 /* The hcalls above are standardized in PAPR and implemented by pHyp
 290  * as well.
 291  *
 292  * We also need some hcalls which are specific to qemu / KVM-on-POWER.
 293  * So far we just need one for H_RTAS, but in future we'll need more
 294  * for extensions like virtio.  We put those into the 0xf000-0xfffc
 295  * range which is reserved by PAPR for "platform-specific" hcalls.
 296  */
 297 #define KVMPPC_HCALL_BASE       0xf000
 298 #define KVMPPC_H_RTAS           (KVMPPC_HCALL_BASE + 0x0)
 299 #define KVMPPC_H_LOGICAL_MEMOP  (KVMPPC_HCALL_BASE + 0x1)
 300 #define KVMPPC_HCALL_MAX        KVMPPC_H_LOGICAL_MEMOP
 301
 302 extern sPAPREnvironment *spapr;
 303
 304 /*#define DEBUG_SPAPR_HCALLS*/
 305
 306 #ifdef DEBUG_SPAPR_HCALLS
 307 #define hcall_dprintf(fmt, ...) \
 308     do { fprintf(stderr, "%s: " fmt, __func__, ## __VA_ARGS__); } while (0)
 309 #else
 310 #define hcall_dprintf(fmt, ...) \
 311     do { } while (0)
 312 #endif
 313
 314 typedef target_ulong (*spapr_hcall_fn)(PowerPCCPU *cpu, sPAPREnvironment *spapr,
 315                                        target_ulong opcode,
 316                                        target_ulong *args);
 317
 318 void spapr_register_hypercall(target_ulong opcode, spapr_hcall_fn fn);
 319 target_ulong spapr_hypercall(PowerPCCPU *cpu, target_ulong opcode,
 320                              target_ulong *args);
 321
 322 int spapr_allocate_irq(int hint, bool lsi);
 323 int spapr_allocate_irq_block(int num, bool lsi, bool msi);
 324
 325 static inline int spapr_allocate_msi(int hint)
 326 {
 327     return spapr_allocate_irq(hint, false);
 328 }
 329
 330 static inline int spapr_allocate_lsi(int hint)
 331 {
 332     return spapr_allocate_irq(hint, true);
 333 }
 334
 335 static inline uint32_t rtas_ld(target_ulong phys, int n)
 336 {
 337     return ldl_be_phys(phys + 4*n);
 338 }
 339
 340 static inline void rtas_st(target_ulong phys, int n, uint32_t val)
 341 {
 342     stl_be_phys(phys + 4*n, val);
 343 }
 344
 345 typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPREnvironment *spapr,
 346                               uint32_t token,
 347                               uint32_t nargs, target_ulong args,
 348                               uint32_t nret, target_ulong rets);
 349 int spapr_rtas_register(const char *name, spapr_rtas_fn fn);
 350 target_ulong spapr_rtas_call(PowerPCCPU *cpu, sPAPREnvironment *spapr,
 351                              uint32_t token, uint32_t nargs, target_ulong args,
 352                              uint32_t nret, target_ulong rets);
 353 int spapr_rtas_device_tree_setup(void *fdt, hwaddr rtas_addr,
 354                                  hwaddr rtas_size);
 355
 356 #define SPAPR_TCE_PAGE_SHIFT   12
 357 #define SPAPR_TCE_PAGE_SIZE    (1ULL << SPAPR_TCE_PAGE_SHIFT)
 358 #define SPAPR_TCE_PAGE_MASK    (SPAPR_TCE_PAGE_SIZE - 1)
 359
 360 #define SPAPR_VIO_BASE_LIOBN    0x00000000
 361 #define SPAPR_PCI_BASE_LIOBN    0x80000000
 362
 363 #define RTAS_ERROR_LOG_MAX      2048
 364
 365 typedef struct sPAPRTCETable sPAPRTCETable;
 366
 367 #define TYPE_SPAPR_TCE_TABLE "spapr-tce-table"
 368 #define SPAPR_TCE_TABLE(obj) \
 369     OBJECT_CHECK(sPAPRTCETable, (obj), TYPE_SPAPR_TCE_TABLE)
 370
 371 struct sPAPRTCETable {
 372     DeviceState parent;
 373     uint32_t liobn;
 374     uint32_t window_size;
 375     uint32_t nb_table;
 376     uint64_t *table;
 377     bool bypass;
 378     int fd;
 379     MemoryRegion iommu;
 380     QLIST_ENTRY(sPAPRTCETable) list;
 381 };
 382
 383 void spapr_events_init(sPAPREnvironment *spapr);
 384 void spapr_events_fdt_skel(void *fdt, uint32_t epow_irq);
 385 sPAPRTCETable *spapr_tce_new_table(DeviceState *owner, uint32_t liobn,
 386                                    size_t window_size);
 387 MemoryRegion *spapr_tce_get_iommu(sPAPRTCETable *tcet);
 388 void spapr_tce_set_bypass(sPAPRTCETable *tcet, bool bypass);
 389 int spapr_dma_dt(void *fdt, int node_off, const char *propname,
 390                  uint32_t liobn, uint64_t window, uint32_t size);
 391 int spapr_tcet_dma_dt(void *fdt, int node_off, const char *propname,
 392                       sPAPRTCETable *tcet);
 393
 394 #endif /* !defined (__HW_SPAPR_H__) */