2 * QEMU model of the Xilinx Zynq SPI controller
4 * Copyright (c) 2012 Peter A. G. Crosthwaite
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 #include "qemu/osdep.h"
26 #include "hw/sysbus.h"
28 #include "hw/ptimer.h"
29 #include "hw/qdev-properties.h"
31 #include "qemu/module.h"
32 #include "qemu/bitops.h"
33 #include "hw/ssi/xilinx_spips.h"
34 #include "qapi/error.h"
35 #include "hw/register.h"
36 #include "sysemu/dma.h"
37 #include "migration/blocker.h"
38 #include "migration/vmstate.h"
40 #ifndef XILINX_SPIPS_ERR_DEBUG
41 #define XILINX_SPIPS_ERR_DEBUG 0
44 #define DB_PRINT_L(level, ...) do { \
45 if (XILINX_SPIPS_ERR_DEBUG > (level)) { \
46 fprintf(stderr, ": %s: ", __func__); \
47 fprintf(stderr, ## __VA_ARGS__); \
52 #define R_CONFIG (0x00 / 4)
53 #define IFMODE (1U << 31)
54 #define R_CONFIG_ENDIAN (1 << 26)
55 #define MODEFAIL_GEN_EN (1 << 17)
56 #define MAN_START_COM (1 << 16)
57 #define MAN_START_EN (1 << 15)
58 #define MANUAL_CS (1 << 14)
59 #define CS (0xF << 10)
61 #define PERI_SEL (1 << 9)
62 #define REF_CLK (1 << 8)
63 #define FIFO_WIDTH (3 << 6)
64 #define BAUD_RATE_DIV (7 << 3)
65 #define CLK_PH (1 << 2)
66 #define CLK_POL (1 << 1)
67 #define MODE_SEL (1 << 0)
68 #define R_CONFIG_RSVD (0x7bf40000)
70 /* interrupt mechanism */
71 #define R_INTR_STATUS (0x04 / 4)
72 #define R_INTR_STATUS_RESET (0x104)
73 #define R_INTR_EN (0x08 / 4)
74 #define R_INTR_DIS (0x0C / 4)
75 #define R_INTR_MASK (0x10 / 4)
76 #define IXR_TX_FIFO_UNDERFLOW (1 << 6)
77 /* Poll timeout not implemented */
78 #define IXR_RX_FIFO_EMPTY (1 << 11)
79 #define IXR_GENERIC_FIFO_FULL (1 << 10)
80 #define IXR_GENERIC_FIFO_NOT_FULL (1 << 9)
81 #define IXR_TX_FIFO_EMPTY (1 << 8)
82 #define IXR_GENERIC_FIFO_EMPTY (1 << 7)
83 #define IXR_RX_FIFO_FULL (1 << 5)
84 #define IXR_RX_FIFO_NOT_EMPTY (1 << 4)
85 #define IXR_TX_FIFO_FULL (1 << 3)
86 #define IXR_TX_FIFO_NOT_FULL (1 << 2)
87 #define IXR_TX_FIFO_MODE_FAIL (1 << 1)
88 #define IXR_RX_FIFO_OVERFLOW (1 << 0)
89 #define IXR_ALL ((1 << 13) - 1)
90 #define GQSPI_IXR_MASK 0xFBE
91 #define IXR_SELF_CLEAR \
92 (IXR_GENERIC_FIFO_EMPTY \
93 | IXR_GENERIC_FIFO_FULL \
94 | IXR_GENERIC_FIFO_NOT_FULL \
97 | IXR_TX_FIFO_NOT_FULL \
100 | IXR_RX_FIFO_NOT_EMPTY)
102 #define R_EN (0x14 / 4)
103 #define R_DELAY (0x18 / 4)
104 #define R_TX_DATA (0x1C / 4)
105 #define R_RX_DATA (0x20 / 4)
106 #define R_SLAVE_IDLE_COUNT (0x24 / 4)
107 #define R_TX_THRES (0x28 / 4)
108 #define R_RX_THRES (0x2C / 4)
109 #define R_GPIO (0x30 / 4)
110 #define R_LPBK_DLY_ADJ (0x38 / 4)
111 #define R_LPBK_DLY_ADJ_RESET (0x33)
112 #define R_IOU_TAPDLY_BYPASS (0x3C / 4)
113 #define R_TXD1 (0x80 / 4)
114 #define R_TXD2 (0x84 / 4)
115 #define R_TXD3 (0x88 / 4)
117 #define R_LQSPI_CFG (0xa0 / 4)
118 #define R_LQSPI_CFG_RESET 0x03A002EB
119 #define LQSPI_CFG_LQ_MODE (1U << 31)
120 #define LQSPI_CFG_TWO_MEM (1 << 30)
121 #define LQSPI_CFG_SEP_BUS (1 << 29)
122 #define LQSPI_CFG_U_PAGE (1 << 28)
123 #define LQSPI_CFG_ADDR4 (1 << 27)
124 #define LQSPI_CFG_MODE_EN (1 << 25)
125 #define LQSPI_CFG_MODE_WIDTH 8
126 #define LQSPI_CFG_MODE_SHIFT 16
127 #define LQSPI_CFG_DUMMY_WIDTH 3
128 #define LQSPI_CFG_DUMMY_SHIFT 8
129 #define LQSPI_CFG_INST_CODE 0xFF
131 #define R_CMND (0xc0 / 4)
132 #define R_CMND_RXFIFO_DRAIN (1 << 19)
133 FIELD(CMND
, PARTIAL_BYTE_LEN
, 16, 3)
134 #define R_CMND_EXT_ADD (1 << 15)
135 FIELD(CMND
, RX_DISCARD
, 8, 7)
136 FIELD(CMND
, DUMMY_CYCLES
, 2, 6)
137 #define R_CMND_DMA_EN (1 << 1)
138 #define R_CMND_PUSH_WAIT (1 << 0)
139 #define R_TRANSFER_SIZE (0xc4 / 4)
140 #define R_LQSPI_STS (0xA4 / 4)
141 #define LQSPI_STS_WR_RECVD (1 << 1)
143 #define R_DUMMY_CYCLE_EN (0xC8 / 4)
144 #define R_ECO (0xF8 / 4)
145 #define R_MOD_ID (0xFC / 4)
147 #define R_GQSPI_SELECT (0x144 / 4)
148 FIELD(GQSPI_SELECT
, GENERIC_QSPI_EN
, 0, 1)
149 #define R_GQSPI_ISR (0x104 / 4)
150 #define R_GQSPI_IER (0x108 / 4)
151 #define R_GQSPI_IDR (0x10c / 4)
152 #define R_GQSPI_IMR (0x110 / 4)
153 #define R_GQSPI_IMR_RESET (0xfbe)
154 #define R_GQSPI_TX_THRESH (0x128 / 4)
155 #define R_GQSPI_RX_THRESH (0x12c / 4)
156 #define R_GQSPI_GPIO (0x130 / 4)
157 #define R_GQSPI_LPBK_DLY_ADJ (0x138 / 4)
158 #define R_GQSPI_LPBK_DLY_ADJ_RESET (0x33)
159 #define R_GQSPI_CNFG (0x100 / 4)
160 FIELD(GQSPI_CNFG
, MODE_EN
, 30, 2)
161 FIELD(GQSPI_CNFG
, GEN_FIFO_START_MODE
, 29, 1)
162 FIELD(GQSPI_CNFG
, GEN_FIFO_START
, 28, 1)
163 FIELD(GQSPI_CNFG
, ENDIAN
, 26, 1)
164 /* Poll timeout not implemented */
165 FIELD(GQSPI_CNFG
, EN_POLL_TIMEOUT
, 20, 1)
166 /* QEMU doesnt care about any of these last three */
167 FIELD(GQSPI_CNFG
, BR
, 3, 3)
168 FIELD(GQSPI_CNFG
, CPH
, 2, 1)
169 FIELD(GQSPI_CNFG
, CPL
, 1, 1)
170 #define R_GQSPI_GEN_FIFO (0x140 / 4)
171 #define R_GQSPI_TXD (0x11c / 4)
172 #define R_GQSPI_RXD (0x120 / 4)
173 #define R_GQSPI_FIFO_CTRL (0x14c / 4)
174 FIELD(GQSPI_FIFO_CTRL
, RX_FIFO_RESET
, 2, 1)
175 FIELD(GQSPI_FIFO_CTRL
, TX_FIFO_RESET
, 1, 1)
176 FIELD(GQSPI_FIFO_CTRL
, GENERIC_FIFO_RESET
, 0, 1)
177 #define R_GQSPI_GFIFO_THRESH (0x150 / 4)
178 #define R_GQSPI_DATA_STS (0x15c / 4)
179 /* We use the snapshot register to hold the core state for the currently
180 * or most recently executed command. So the generic fifo format is defined
181 * for the snapshot register
183 #define R_GQSPI_GF_SNAPSHOT (0x160 / 4)
184 FIELD(GQSPI_GF_SNAPSHOT
, POLL
, 19, 1)
185 FIELD(GQSPI_GF_SNAPSHOT
, STRIPE
, 18, 1)
186 FIELD(GQSPI_GF_SNAPSHOT
, RECIEVE
, 17, 1)
187 FIELD(GQSPI_GF_SNAPSHOT
, TRANSMIT
, 16, 1)
188 FIELD(GQSPI_GF_SNAPSHOT
, DATA_BUS_SELECT
, 14, 2)
189 FIELD(GQSPI_GF_SNAPSHOT
, CHIP_SELECT
, 12, 2)
190 FIELD(GQSPI_GF_SNAPSHOT
, SPI_MODE
, 10, 2)
191 FIELD(GQSPI_GF_SNAPSHOT
, EXPONENT
, 9, 1)
192 FIELD(GQSPI_GF_SNAPSHOT
, DATA_XFER
, 8, 1)
193 FIELD(GQSPI_GF_SNAPSHOT
, IMMEDIATE_DATA
, 0, 8)
194 #define R_GQSPI_MOD_ID (0x1fc / 4)
195 #define R_GQSPI_MOD_ID_RESET (0x10a0000)
197 #define R_QSPIDMA_DST_CTRL (0x80c / 4)
198 #define R_QSPIDMA_DST_CTRL_RESET (0x803ffa00)
199 #define R_QSPIDMA_DST_I_MASK (0x820 / 4)
200 #define R_QSPIDMA_DST_I_MASK_RESET (0xfe)
201 #define R_QSPIDMA_DST_CTRL2 (0x824 / 4)
202 #define R_QSPIDMA_DST_CTRL2_RESET (0x081bfff8)
204 /* size of TXRX FIFOs */
208 #define RXFF_A_Q (64 * 4)
209 #define TXFF_A_Q (64 * 4)
211 /* 16MB per linear region */
212 #define LQSPI_ADDRESS_BITS 24
214 #define SNOOP_CHECKING 0xFF
215 #define SNOOP_ADDR 0xF0
216 #define SNOOP_NONE 0xEE
217 #define SNOOP_STRIPING 0
219 #define MIN_NUM_BUSSES 1
220 #define MAX_NUM_BUSSES 2
222 static inline int num_effective_busses(XilinxSPIPS
*s
)
224 return (s
->regs
[R_LQSPI_CFG
] & LQSPI_CFG_SEP_BUS
&&
225 s
->regs
[R_LQSPI_CFG
] & LQSPI_CFG_TWO_MEM
) ? s
->num_busses
: 1;
228 static void xilinx_spips_update_cs(XilinxSPIPS
*s
, int field
)
232 for (i
= 0; i
< s
->num_cs
* s
->num_busses
; i
++) {
233 bool old_state
= s
->cs_lines_state
[i
];
234 bool new_state
= field
& (1 << i
);
236 if (old_state
!= new_state
) {
237 s
->cs_lines_state
[i
] = new_state
;
238 s
->rx_discard
= ARRAY_FIELD_EX32(s
->regs
, CMND
, RX_DISCARD
);
239 DB_PRINT_L(1, "%sselecting peripheral %d\n",
240 new_state
? "" : "de", i
);
242 qemu_set_irq(s
->cs_lines
[i
], !new_state
);
244 if (!(field
& ((1 << (s
->num_cs
* s
->num_busses
)) - 1))) {
245 s
->snoop_state
= SNOOP_CHECKING
;
248 s
->link_state_next
= 1;
249 s
->link_state_next_when
= 0;
250 DB_PRINT_L(1, "moving to snoop check state\n");
254 static void xlnx_zynqmp_qspips_update_cs_lines(XlnxZynqMPQSPIPS
*s
)
256 if (s
->regs
[R_GQSPI_GF_SNAPSHOT
]) {
257 int field
= ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, CHIP_SELECT
);
258 bool upper_cs_sel
= field
& (1 << 1);
259 bool lower_cs_sel
= field
& 1;
265 buses
= ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, DATA_BUS_SELECT
);
266 bus0_enabled
= buses
& 1;
267 bus1_enabled
= buses
& (1 << 1);
269 if (bus0_enabled
&& bus1_enabled
) {
276 } else if (bus0_enabled
) {
283 } else if (bus1_enabled
) {
291 xilinx_spips_update_cs(XILINX_SPIPS(s
), cs
);
295 static void xilinx_spips_update_cs_lines(XilinxSPIPS
*s
)
297 int field
= ~((s
->regs
[R_CONFIG
] & CS
) >> CS_SHIFT
);
299 /* In dual parallel, mirror low CS to both */
300 if (num_effective_busses(s
) == 2) {
301 /* Single bit chip-select for qspi */
304 /* Dual stack U-Page */
305 } else if (s
->regs
[R_LQSPI_CFG
] & LQSPI_CFG_TWO_MEM
&&
306 s
->regs
[R_LQSPI_STS
] & LQSPI_CFG_U_PAGE
) {
307 /* Single bit chip-select for qspi */
309 /* change from CS0 to CS1 */
313 if (!(s
->regs
[R_CONFIG
] & MANUAL_CS
) &&
314 fifo8_is_empty(&s
->tx_fifo
)) {
317 xilinx_spips_update_cs(s
, field
);
320 static void xilinx_spips_update_ixr(XilinxSPIPS
*s
)
322 if (!(s
->regs
[R_LQSPI_CFG
] & LQSPI_CFG_LQ_MODE
)) {
323 s
->regs
[R_INTR_STATUS
] &= ~IXR_SELF_CLEAR
;
324 s
->regs
[R_INTR_STATUS
] |=
325 (fifo8_is_full(&s
->rx_fifo
) ? IXR_RX_FIFO_FULL
: 0) |
326 (s
->rx_fifo
.num
>= s
->regs
[R_RX_THRES
] ?
327 IXR_RX_FIFO_NOT_EMPTY
: 0) |
328 (fifo8_is_full(&s
->tx_fifo
) ? IXR_TX_FIFO_FULL
: 0) |
329 (fifo8_is_empty(&s
->tx_fifo
) ? IXR_TX_FIFO_EMPTY
: 0) |
330 (s
->tx_fifo
.num
< s
->regs
[R_TX_THRES
] ? IXR_TX_FIFO_NOT_FULL
: 0);
332 int new_irqline
= !!(s
->regs
[R_INTR_MASK
] & s
->regs
[R_INTR_STATUS
] &
334 if (new_irqline
!= s
->irqline
) {
335 s
->irqline
= new_irqline
;
336 qemu_set_irq(s
->irq
, s
->irqline
);
340 static void xlnx_zynqmp_qspips_update_ixr(XlnxZynqMPQSPIPS
*s
)
345 s
->regs
[R_GQSPI_ISR
] &= ~IXR_SELF_CLEAR
;
346 s
->regs
[R_GQSPI_ISR
] |=
347 (fifo32_is_empty(&s
->fifo_g
) ? IXR_GENERIC_FIFO_EMPTY
: 0) |
348 (fifo32_is_full(&s
->fifo_g
) ? IXR_GENERIC_FIFO_FULL
: 0) |
349 (s
->fifo_g
.fifo
.num
< s
->regs
[R_GQSPI_GFIFO_THRESH
] ?
350 IXR_GENERIC_FIFO_NOT_FULL
: 0) |
351 (fifo8_is_empty(&s
->rx_fifo_g
) ? IXR_RX_FIFO_EMPTY
: 0) |
352 (fifo8_is_full(&s
->rx_fifo_g
) ? IXR_RX_FIFO_FULL
: 0) |
353 (s
->rx_fifo_g
.num
>= s
->regs
[R_GQSPI_RX_THRESH
] ?
354 IXR_RX_FIFO_NOT_EMPTY
: 0) |
355 (fifo8_is_empty(&s
->tx_fifo_g
) ? IXR_TX_FIFO_EMPTY
: 0) |
356 (fifo8_is_full(&s
->tx_fifo_g
) ? IXR_TX_FIFO_FULL
: 0) |
357 (s
->tx_fifo_g
.num
< s
->regs
[R_GQSPI_TX_THRESH
] ?
358 IXR_TX_FIFO_NOT_FULL
: 0);
360 /* GQSPI Interrupt Trigger Status */
361 gqspi_int
= (~s
->regs
[R_GQSPI_IMR
]) & s
->regs
[R_GQSPI_ISR
] & GQSPI_IXR_MASK
;
362 new_irqline
= !!(gqspi_int
& IXR_ALL
);
364 /* drive external interrupt pin */
365 if (new_irqline
!= s
->gqspi_irqline
) {
366 s
->gqspi_irqline
= new_irqline
;
367 qemu_set_irq(XILINX_SPIPS(s
)->irq
, s
->gqspi_irqline
);
371 static void xilinx_spips_reset(DeviceState
*d
)
373 XilinxSPIPS
*s
= XILINX_SPIPS(d
);
375 memset(s
->regs
, 0, sizeof(s
->regs
));
377 fifo8_reset(&s
->rx_fifo
);
378 fifo8_reset(&s
->rx_fifo
);
379 /* non zero resets */
380 s
->regs
[R_CONFIG
] |= MODEFAIL_GEN_EN
;
381 s
->regs
[R_SLAVE_IDLE_COUNT
] = 0xFF;
382 s
->regs
[R_TX_THRES
] = 1;
383 s
->regs
[R_RX_THRES
] = 1;
384 /* FIXME: move magic number definition somewhere sensible */
385 s
->regs
[R_MOD_ID
] = 0x01090106;
386 s
->regs
[R_LQSPI_CFG
] = R_LQSPI_CFG_RESET
;
388 s
->link_state_next
= 1;
389 s
->link_state_next_when
= 0;
390 s
->snoop_state
= SNOOP_CHECKING
;
392 s
->man_start_com
= false;
393 xilinx_spips_update_ixr(s
);
394 xilinx_spips_update_cs_lines(s
);
397 static void xlnx_zynqmp_qspips_reset(DeviceState
*d
)
399 XlnxZynqMPQSPIPS
*s
= XLNX_ZYNQMP_QSPIPS(d
);
401 xilinx_spips_reset(d
);
403 memset(s
->regs
, 0, sizeof(s
->regs
));
405 fifo8_reset(&s
->rx_fifo_g
);
406 fifo8_reset(&s
->rx_fifo_g
);
407 fifo32_reset(&s
->fifo_g
);
408 s
->regs
[R_INTR_STATUS
] = R_INTR_STATUS_RESET
;
410 s
->regs
[R_LPBK_DLY_ADJ
] = R_LPBK_DLY_ADJ_RESET
;
411 s
->regs
[R_GQSPI_GFIFO_THRESH
] = 0x10;
412 s
->regs
[R_MOD_ID
] = 0x01090101;
413 s
->regs
[R_GQSPI_IMR
] = R_GQSPI_IMR_RESET
;
414 s
->regs
[R_GQSPI_TX_THRESH
] = 1;
415 s
->regs
[R_GQSPI_RX_THRESH
] = 1;
416 s
->regs
[R_GQSPI_GPIO
] = 1;
417 s
->regs
[R_GQSPI_LPBK_DLY_ADJ
] = R_GQSPI_LPBK_DLY_ADJ_RESET
;
418 s
->regs
[R_GQSPI_MOD_ID
] = R_GQSPI_MOD_ID_RESET
;
419 s
->regs
[R_QSPIDMA_DST_CTRL
] = R_QSPIDMA_DST_CTRL_RESET
;
420 s
->regs
[R_QSPIDMA_DST_I_MASK
] = R_QSPIDMA_DST_I_MASK_RESET
;
421 s
->regs
[R_QSPIDMA_DST_CTRL2
] = R_QSPIDMA_DST_CTRL2_RESET
;
422 s
->man_start_com_g
= false;
423 s
->gqspi_irqline
= 0;
424 xlnx_zynqmp_qspips_update_ixr(s
);
427 /* N way (num) in place bit striper. Lay out row wise bits (MSB to LSB)
428 * column wise (from element 0 to N-1). num is the length of x, and dir
429 * reverses the direction of the transform. Best illustrated by example:
430 * Each digit in the below array is a single bit (num == 3):
432 * {{ 76543210, } ----- stripe (dir == false) -----> {{ 741gdaFC, }
433 * { hgfedcba, } { 630fcHEB, }
434 * { HGFEDCBA, }} <---- upstripe (dir == true) ----- { 52hebGDA, }}
437 static inline void stripe8(uint8_t *x
, int num
, bool dir
)
439 uint8_t r
[MAX_NUM_BUSSES
];
444 assert(num
<= MAX_NUM_BUSSES
);
445 memset(r
, 0, sizeof(uint8_t) * num
);
447 for (idx
[0] = 0; idx
[0] < num
; ++idx
[0]) {
448 for (bit
[0] = 7; bit
[0] >= 0; bit
[0]--) {
449 r
[idx
[!d
]] |= x
[idx
[d
]] & 1 << bit
[d
] ? 1 << bit
[!d
] : 0;
450 idx
[1] = (idx
[1] + 1) % num
;
456 memcpy(x
, r
, sizeof(uint8_t) * num
);
459 static void xlnx_zynqmp_qspips_flush_fifo_g(XlnxZynqMPQSPIPS
*s
)
461 while (s
->regs
[R_GQSPI_DATA_STS
] || !fifo32_is_empty(&s
->fifo_g
)) {
462 uint8_t tx_rx
[2] = { 0 };
467 if (!s
->regs
[R_GQSPI_DATA_STS
]) {
470 s
->regs
[R_GQSPI_GF_SNAPSHOT
] = fifo32_pop(&s
->fifo_g
);
471 DB_PRINT_L(0, "GQSPI command: %x\n", s
->regs
[R_GQSPI_GF_SNAPSHOT
]);
472 if (!s
->regs
[R_GQSPI_GF_SNAPSHOT
]) {
473 DB_PRINT_L(0, "Dummy GQSPI Delay Command Entry, Do nothing");
476 xlnx_zynqmp_qspips_update_cs_lines(s
);
478 imm
= ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, IMMEDIATE_DATA
);
479 if (!ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, DATA_XFER
)) {
480 /* immedate transfer */
481 if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, TRANSMIT
) ||
482 ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, RECIEVE
)) {
483 s
->regs
[R_GQSPI_DATA_STS
] = 1;
484 /* CS setup/hold - do nothing */
486 s
->regs
[R_GQSPI_DATA_STS
] = 0;
488 } else if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, EXPONENT
)) {
490 qemu_log_mask(LOG_UNIMP
, "QSPI exponential transfer too"
491 " long - 2 ^ %" PRId8
" requested\n", imm
);
493 s
->regs
[R_GQSPI_DATA_STS
] = 1ul << imm
;
495 s
->regs
[R_GQSPI_DATA_STS
] = imm
;
498 /* Zero length transfer check */
499 if (!s
->regs
[R_GQSPI_DATA_STS
]) {
502 if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, RECIEVE
) &&
503 fifo8_is_full(&s
->rx_fifo_g
)) {
504 /* No space in RX fifo for transfer - try again later */
507 if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, STRIPE
) &&
508 (ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, TRANSMIT
) ||
509 ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, RECIEVE
))) {
512 if (!ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, DATA_XFER
)) {
513 tx_rx
[0] = ARRAY_FIELD_EX32(s
->regs
,
514 GQSPI_GF_SNAPSHOT
, IMMEDIATE_DATA
);
515 } else if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, TRANSMIT
)) {
516 for (i
= 0; i
< num_stripes
; ++i
) {
517 if (!fifo8_is_empty(&s
->tx_fifo_g
)) {
518 tx_rx
[i
] = fifo8_pop(&s
->tx_fifo_g
);
519 s
->tx_fifo_g_align
++;
525 if (num_stripes
== 1) {
529 busses
= ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, DATA_BUS_SELECT
);
530 for (i
= 0; i
< 2; ++i
) {
531 DB_PRINT_L(1, "bus %d tx = %02x\n", i
, tx_rx
[i
]);
532 tx_rx
[i
] = ssi_transfer(XILINX_SPIPS(s
)->spi
[i
], tx_rx
[i
]);
533 DB_PRINT_L(1, "bus %d rx = %02x\n", i
, tx_rx
[i
]);
535 if (s
->regs
[R_GQSPI_DATA_STS
] > 1 &&
536 busses
== 0x3 && num_stripes
== 2) {
537 s
->regs
[R_GQSPI_DATA_STS
] -= 2;
538 } else if (s
->regs
[R_GQSPI_DATA_STS
] > 0) {
539 s
->regs
[R_GQSPI_DATA_STS
]--;
541 if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_GF_SNAPSHOT
, RECIEVE
)) {
542 for (i
= 0; i
< 2; ++i
) {
543 if (busses
& (1 << i
)) {
544 DB_PRINT_L(1, "bus %d push_byte = %02x\n", i
, tx_rx
[i
]);
545 fifo8_push(&s
->rx_fifo_g
, tx_rx
[i
]);
546 s
->rx_fifo_g_align
++;
550 if (!s
->regs
[R_GQSPI_DATA_STS
]) {
551 for (; s
->tx_fifo_g_align
% 4; s
->tx_fifo_g_align
++) {
552 fifo8_pop(&s
->tx_fifo_g
);
554 for (; s
->rx_fifo_g_align
% 4; s
->rx_fifo_g_align
++) {
555 fifo8_push(&s
->rx_fifo_g
, 0);
561 static int xilinx_spips_num_dummies(XilinxQSPIPS
*qs
, uint8_t command
)
564 /* The SPI device is not a QSPI device */
568 switch (command
) { /* check for dummies */
569 case READ
: /* no dummy bytes/cycles */
595 static inline uint8_t get_addr_length(XilinxSPIPS
*s
, uint8_t cmd
)
608 return (s
->regs
[R_CMND
] & R_CMND_EXT_ADD
) ? 4 : 3;
612 static void xilinx_spips_flush_txfifo(XilinxSPIPS
*s
)
615 XilinxQSPIPS
*q
= (XilinxQSPIPS
*) object_dynamic_cast(OBJECT(s
),
621 uint8_t tx_rx
[MAX_NUM_BUSSES
] = { 0 };
622 uint8_t dummy_cycles
= 0;
625 if (fifo8_is_empty(&s
->tx_fifo
)) {
626 xilinx_spips_update_ixr(s
);
628 } else if (s
->snoop_state
== SNOOP_STRIPING
||
629 s
->snoop_state
== SNOOP_NONE
) {
630 for (i
= 0; i
< num_effective_busses(s
); ++i
) {
631 tx_rx
[i
] = fifo8_pop(&s
->tx_fifo
);
633 stripe8(tx_rx
, num_effective_busses(s
), false);
634 } else if (s
->snoop_state
>= SNOOP_ADDR
) {
635 tx
= fifo8_pop(&s
->tx_fifo
);
636 for (i
= 0; i
< num_effective_busses(s
); ++i
) {
640 /* Extract a dummy byte and generate dummy cycles according to the
642 tx
= fifo8_pop(&s
->tx_fifo
);
643 dummy_cycles
= 8 / s
->link_state
;
646 for (i
= 0; i
< num_effective_busses(s
); ++i
) {
647 int bus
= num_effective_busses(s
) - 1 - i
;
650 for (d
= 0; d
< dummy_cycles
; ++d
) {
651 tx_rx
[0] = ssi_transfer(s
->spi
[bus
], (uint32_t)tx_rx
[0]);
654 DB_PRINT_L(debug_level
, "tx = %02x\n", tx_rx
[i
]);
655 tx_rx
[i
] = ssi_transfer(s
->spi
[bus
], (uint32_t)tx_rx
[i
]);
656 DB_PRINT_L(debug_level
, "rx = %02x\n", tx_rx
[i
]);
660 if (s
->regs
[R_CMND
] & R_CMND_RXFIFO_DRAIN
) {
661 DB_PRINT_L(debug_level
, "dircarding drained rx byte\n");
663 } else if (s
->rx_discard
) {
664 DB_PRINT_L(debug_level
, "dircarding discarded rx byte\n");
665 s
->rx_discard
-= 8 / s
->link_state
;
666 } else if (fifo8_is_full(&s
->rx_fifo
)) {
667 s
->regs
[R_INTR_STATUS
] |= IXR_RX_FIFO_OVERFLOW
;
668 DB_PRINT_L(0, "rx FIFO overflow");
669 } else if (s
->snoop_state
== SNOOP_STRIPING
) {
670 stripe8(tx_rx
, num_effective_busses(s
), true);
671 for (i
= 0; i
< num_effective_busses(s
); ++i
) {
672 fifo8_push(&s
->rx_fifo
, (uint8_t)tx_rx
[i
]);
673 DB_PRINT_L(debug_level
, "pushing striped rx byte\n");
676 DB_PRINT_L(debug_level
, "pushing unstriped rx byte\n");
677 fifo8_push(&s
->rx_fifo
, (uint8_t)tx_rx
[0]);
680 if (s
->link_state_next_when
) {
681 s
->link_state_next_when
--;
682 if (!s
->link_state_next_when
) {
683 s
->link_state
= s
->link_state_next
;
687 DB_PRINT_L(debug_level
, "initial snoop state: %x\n",
688 (unsigned)s
->snoop_state
);
689 switch (s
->snoop_state
) {
690 case (SNOOP_CHECKING
):
691 /* Store the count of dummy bytes in the txfifo */
692 s
->cmd_dummies
= xilinx_spips_num_dummies(q
, tx
);
693 addr_length
= get_addr_length(s
, tx
);
694 if (s
->cmd_dummies
< 0) {
695 s
->snoop_state
= SNOOP_NONE
;
697 s
->snoop_state
= SNOOP_ADDR
+ addr_length
- 1;
703 s
->link_state_next
= 2;
704 s
->link_state_next_when
= addr_length
+ s
->cmd_dummies
;
710 s
->link_state_next
= 4;
711 s
->link_state_next_when
= addr_length
+ s
->cmd_dummies
;
724 /* Address has been transmitted, transmit dummy cycles now if
726 if (s
->cmd_dummies
< 0) {
727 s
->snoop_state
= SNOOP_NONE
;
729 s
->snoop_state
= s
->cmd_dummies
;
732 case (SNOOP_STRIPING
):
734 /* Once we hit the boring stuff - squelch debug noise */
736 DB_PRINT_L(0, "squelching debug info ....\n");
743 DB_PRINT_L(debug_level
, "final snoop state: %x\n",
744 (unsigned)s
->snoop_state
);
748 static inline void tx_data_bytes(Fifo8
*fifo
, uint32_t value
, int num
, bool be
)
751 for (i
= 0; i
< num
&& !fifo8_is_full(fifo
); ++i
) {
753 fifo8_push(fifo
, (uint8_t)(value
>> 24));
756 fifo8_push(fifo
, (uint8_t)value
);
762 static void xilinx_spips_check_zero_pump(XilinxSPIPS
*s
)
764 if (!s
->regs
[R_TRANSFER_SIZE
]) {
767 if (!fifo8_is_empty(&s
->tx_fifo
) && s
->regs
[R_CMND
] & R_CMND_PUSH_WAIT
) {
771 * The zero pump must never fill tx fifo such that rx overflow is
774 while (s
->regs
[R_TRANSFER_SIZE
] &&
775 s
->rx_fifo
.num
+ s
->tx_fifo
.num
< RXFF_A_Q
- 3) {
776 /* endianess just doesn't matter when zero pumping */
777 tx_data_bytes(&s
->tx_fifo
, 0, 4, false);
778 s
->regs
[R_TRANSFER_SIZE
] &= ~0x03ull
;
779 s
->regs
[R_TRANSFER_SIZE
] -= 4;
783 static void xilinx_spips_check_flush(XilinxSPIPS
*s
)
785 if (s
->man_start_com
||
786 (!fifo8_is_empty(&s
->tx_fifo
) &&
787 !(s
->regs
[R_CONFIG
] & MAN_START_EN
))) {
788 xilinx_spips_check_zero_pump(s
);
789 xilinx_spips_flush_txfifo(s
);
791 if (fifo8_is_empty(&s
->tx_fifo
) && !s
->regs
[R_TRANSFER_SIZE
]) {
792 s
->man_start_com
= false;
794 xilinx_spips_update_ixr(s
);
797 static void xlnx_zynqmp_qspips_check_flush(XlnxZynqMPQSPIPS
*s
)
799 bool gqspi_has_work
= s
->regs
[R_GQSPI_DATA_STS
] ||
800 !fifo32_is_empty(&s
->fifo_g
);
802 if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_SELECT
, GENERIC_QSPI_EN
)) {
803 if (s
->man_start_com_g
|| (gqspi_has_work
&&
804 !ARRAY_FIELD_EX32(s
->regs
, GQSPI_CNFG
, GEN_FIFO_START_MODE
))) {
805 xlnx_zynqmp_qspips_flush_fifo_g(s
);
808 xilinx_spips_check_flush(XILINX_SPIPS(s
));
810 if (!gqspi_has_work
) {
811 s
->man_start_com_g
= false;
813 xlnx_zynqmp_qspips_update_ixr(s
);
816 static inline int rx_data_bytes(Fifo8
*fifo
, uint8_t *value
, int max
)
820 for (i
= 0; i
< max
&& !fifo8_is_empty(fifo
); ++i
) {
821 value
[i
] = fifo8_pop(fifo
);
826 static const void *pop_buf(Fifo8
*fifo
, uint32_t max
, uint32_t *num
)
830 if (max
== 0 || max
> fifo
->num
) {
833 *num
= MIN(fifo
->capacity
- fifo
->head
, max
);
834 ret
= &fifo
->data
[fifo
->head
];
836 fifo
->head
%= fifo
->capacity
;
841 static void xlnx_zynqmp_qspips_notify(void *opaque
)
843 XlnxZynqMPQSPIPS
*rq
= XLNX_ZYNQMP_QSPIPS(opaque
);
844 XilinxSPIPS
*s
= XILINX_SPIPS(rq
);
847 if (ARRAY_FIELD_EX32(rq
->regs
, GQSPI_SELECT
, GENERIC_QSPI_EN
)) {
848 if (!(ARRAY_FIELD_EX32(rq
->regs
, GQSPI_CNFG
, MODE_EN
) == 2)) {
851 recv_fifo
= &rq
->rx_fifo_g
;
853 if (!(s
->regs
[R_CMND
] & R_CMND_DMA_EN
)) {
856 recv_fifo
= &s
->rx_fifo
;
858 while (recv_fifo
->num
>= 4
859 && stream_can_push(rq
->dma
, xlnx_zynqmp_qspips_notify
, rq
))
866 len
= recv_fifo
->num
>= rq
->dma_burst_size
? rq
->dma_burst_size
:
868 rxd
= pop_buf(recv_fifo
, len
, &num
);
870 memcpy(rq
->dma_buf
, rxd
, num
);
872 ret
= stream_push(rq
->dma
, rq
->dma_buf
, num
, false);
874 xlnx_zynqmp_qspips_check_flush(rq
);
878 static uint64_t xilinx_spips_read(void *opaque
, hwaddr addr
,
881 XilinxSPIPS
*s
= opaque
;
890 mask
= ~(R_CONFIG_RSVD
| MAN_START_COM
);
893 ret
= s
->regs
[addr
] & IXR_ALL
;
895 DB_PRINT_L(0, "addr=" TARGET_FMT_plx
" = %x\n", addr
* 4, ret
);
896 xilinx_spips_update_ixr(s
);
904 case R_SLAVE_IDLE_COUNT
:
916 memset(rx_buf
, 0, sizeof(rx_buf
));
917 shortfall
= rx_data_bytes(&s
->rx_fifo
, rx_buf
, s
->num_txrx_bytes
);
918 ret
= s
->regs
[R_CONFIG
] & R_CONFIG_ENDIAN
?
919 cpu_to_be32(*(uint32_t *)rx_buf
) :
920 cpu_to_le32(*(uint32_t *)rx_buf
);
921 if (!(s
->regs
[R_CONFIG
] & R_CONFIG_ENDIAN
)) {
922 ret
<<= 8 * shortfall
;
924 DB_PRINT_L(0, "addr=" TARGET_FMT_plx
" = %x\n", addr
* 4, ret
);
925 xilinx_spips_check_flush(s
);
926 xilinx_spips_update_ixr(s
);
929 DB_PRINT_L(0, "addr=" TARGET_FMT_plx
" = %x\n", addr
* 4,
930 s
->regs
[addr
] & mask
);
931 return s
->regs
[addr
] & mask
;
935 static uint64_t xlnx_zynqmp_qspips_read(void *opaque
,
936 hwaddr addr
, unsigned size
)
938 XlnxZynqMPQSPIPS
*s
= XLNX_ZYNQMP_QSPIPS(opaque
);
939 uint32_t reg
= addr
/ 4;
944 if (reg
<= R_MOD_ID
) {
945 return xilinx_spips_read(opaque
, addr
, size
);
949 if (fifo8_is_empty(&s
->rx_fifo_g
)) {
950 qemu_log_mask(LOG_GUEST_ERROR
,
951 "Read from empty GQSPI RX FIFO\n");
954 memset(rx_buf
, 0, sizeof(rx_buf
));
955 shortfall
= rx_data_bytes(&s
->rx_fifo_g
, rx_buf
,
956 XILINX_SPIPS(s
)->num_txrx_bytes
);
957 ret
= ARRAY_FIELD_EX32(s
->regs
, GQSPI_CNFG
, ENDIAN
) ?
958 cpu_to_be32(*(uint32_t *)rx_buf
) :
959 cpu_to_le32(*(uint32_t *)rx_buf
);
960 if (!ARRAY_FIELD_EX32(s
->regs
, GQSPI_CNFG
, ENDIAN
)) {
961 ret
<<= 8 * shortfall
;
963 xlnx_zynqmp_qspips_check_flush(s
);
964 xlnx_zynqmp_qspips_update_ixr(s
);
972 static void xilinx_spips_write(void *opaque
, hwaddr addr
,
973 uint64_t value
, unsigned size
)
976 XilinxSPIPS
*s
= opaque
;
977 bool try_flush
= true;
979 DB_PRINT_L(0, "addr=" TARGET_FMT_plx
" = %x\n", addr
, (unsigned)value
);
983 mask
= ~(R_CONFIG_RSVD
| MAN_START_COM
);
984 if ((value
& MAN_START_COM
) && (s
->regs
[R_CONFIG
] & MAN_START_EN
)) {
985 s
->man_start_com
= true;
990 s
->regs
[R_INTR_STATUS
] &= ~(mask
& value
);
994 s
->regs
[R_INTR_MASK
] &= ~(mask
& value
);
998 s
->regs
[R_INTR_MASK
] |= mask
& value
;
1003 case R_SLAVE_IDLE_COUNT
:
1012 tx_data_bytes(&s
->tx_fifo
, (uint32_t)value
, s
->num_txrx_bytes
,
1013 s
->regs
[R_CONFIG
] & R_CONFIG_ENDIAN
);
1016 tx_data_bytes(&s
->tx_fifo
, (uint32_t)value
, 1,
1017 s
->regs
[R_CONFIG
] & R_CONFIG_ENDIAN
);
1020 tx_data_bytes(&s
->tx_fifo
, (uint32_t)value
, 2,
1021 s
->regs
[R_CONFIG
] & R_CONFIG_ENDIAN
);
1024 tx_data_bytes(&s
->tx_fifo
, (uint32_t)value
, 3,
1025 s
->regs
[R_CONFIG
] & R_CONFIG_ENDIAN
);
1027 /* Skip SPI bus update for below registers writes */
1029 case R_LPBK_DLY_ADJ
:
1030 case R_IOU_TAPDLY_BYPASS
:
1031 case R_DUMMY_CYCLE_EN
:
1036 s
->regs
[addr
] = (s
->regs
[addr
] & ~mask
) | (value
& mask
);
1039 xilinx_spips_update_cs_lines(s
);
1040 xilinx_spips_check_flush(s
);
1041 xilinx_spips_update_cs_lines(s
);
1042 xilinx_spips_update_ixr(s
);
1046 static const MemoryRegionOps spips_ops
= {
1047 .read
= xilinx_spips_read
,
1048 .write
= xilinx_spips_write
,
1049 .endianness
= DEVICE_LITTLE_ENDIAN
,
1052 static void xilinx_qspips_invalidate_mmio_ptr(XilinxQSPIPS
*q
)
1054 q
->lqspi_cached_addr
= ~0ULL;
1057 static void xilinx_qspips_write(void *opaque
, hwaddr addr
,
1058 uint64_t value
, unsigned size
)
1060 XilinxQSPIPS
*q
= XILINX_QSPIPS(opaque
);
1061 XilinxSPIPS
*s
= XILINX_SPIPS(opaque
);
1063 xilinx_spips_write(opaque
, addr
, value
, size
);
1066 if (addr
== R_LQSPI_CFG
) {
1067 xilinx_qspips_invalidate_mmio_ptr(q
);
1069 if (s
->regs
[R_CMND
] & R_CMND_RXFIFO_DRAIN
) {
1070 fifo8_reset(&s
->rx_fifo
);
1074 static void xlnx_zynqmp_qspips_write(void *opaque
, hwaddr addr
,
1075 uint64_t value
, unsigned size
)
1077 XlnxZynqMPQSPIPS
*s
= XLNX_ZYNQMP_QSPIPS(opaque
);
1078 uint32_t reg
= addr
/ 4;
1080 if (reg
<= R_MOD_ID
) {
1081 xilinx_qspips_write(opaque
, addr
, value
, size
);
1085 if (FIELD_EX32(value
, GQSPI_CNFG
, GEN_FIFO_START
) &&
1086 ARRAY_FIELD_EX32(s
->regs
, GQSPI_CNFG
, GEN_FIFO_START_MODE
)) {
1087 s
->man_start_com_g
= true;
1089 s
->regs
[reg
] = value
& ~(R_GQSPI_CNFG_GEN_FIFO_START_MASK
);
1091 case R_GQSPI_GEN_FIFO
:
1092 if (!fifo32_is_full(&s
->fifo_g
)) {
1093 fifo32_push(&s
->fifo_g
, value
);
1097 tx_data_bytes(&s
->tx_fifo_g
, (uint32_t)value
, 4,
1098 ARRAY_FIELD_EX32(s
->regs
, GQSPI_CNFG
, ENDIAN
));
1100 case R_GQSPI_FIFO_CTRL
:
1101 if (FIELD_EX32(value
, GQSPI_FIFO_CTRL
, GENERIC_FIFO_RESET
)) {
1102 fifo32_reset(&s
->fifo_g
);
1104 if (FIELD_EX32(value
, GQSPI_FIFO_CTRL
, TX_FIFO_RESET
)) {
1105 fifo8_reset(&s
->tx_fifo_g
);
1107 if (FIELD_EX32(value
, GQSPI_FIFO_CTRL
, RX_FIFO_RESET
)) {
1108 fifo8_reset(&s
->rx_fifo_g
);
1112 s
->regs
[R_GQSPI_IMR
] |= value
;
1115 s
->regs
[R_GQSPI_IMR
] &= ~value
;
1118 s
->regs
[R_GQSPI_ISR
] &= ~value
;
1122 case R_GQSPI_GF_SNAPSHOT
:
1123 case R_GQSPI_MOD_ID
:
1126 s
->regs
[reg
] = value
;
1129 xlnx_zynqmp_qspips_update_cs_lines(s
);
1130 xlnx_zynqmp_qspips_check_flush(s
);
1131 xlnx_zynqmp_qspips_update_cs_lines(s
);
1132 xlnx_zynqmp_qspips_update_ixr(s
);
1134 xlnx_zynqmp_qspips_notify(s
);
1137 static const MemoryRegionOps qspips_ops
= {
1138 .read
= xilinx_spips_read
,
1139 .write
= xilinx_qspips_write
,
1140 .endianness
= DEVICE_LITTLE_ENDIAN
,
1143 static const MemoryRegionOps xlnx_zynqmp_qspips_ops
= {
1144 .read
= xlnx_zynqmp_qspips_read
,
1145 .write
= xlnx_zynqmp_qspips_write
,
1146 .endianness
= DEVICE_LITTLE_ENDIAN
,
1149 #define LQSPI_CACHE_SIZE 1024
1151 static void lqspi_load_cache(void *opaque
, hwaddr addr
)
1153 XilinxQSPIPS
*q
= opaque
;
1154 XilinxSPIPS
*s
= opaque
;
1156 int flash_addr
= ((addr
& ~(LQSPI_CACHE_SIZE
- 1))
1157 / num_effective_busses(s
));
1158 int peripheral
= flash_addr
>> LQSPI_ADDRESS_BITS
;
1159 int cache_entry
= 0;
1160 uint32_t u_page_save
= s
->regs
[R_LQSPI_STS
] & ~LQSPI_CFG_U_PAGE
;
1162 if (addr
< q
->lqspi_cached_addr
||
1163 addr
> q
->lqspi_cached_addr
+ LQSPI_CACHE_SIZE
- 4) {
1164 xilinx_qspips_invalidate_mmio_ptr(q
);
1165 s
->regs
[R_LQSPI_STS
] &= ~LQSPI_CFG_U_PAGE
;
1166 s
->regs
[R_LQSPI_STS
] |= peripheral
? LQSPI_CFG_U_PAGE
: 0;
1168 DB_PRINT_L(0, "config reg status: %08x\n", s
->regs
[R_LQSPI_CFG
]);
1170 fifo8_reset(&s
->tx_fifo
);
1171 fifo8_reset(&s
->rx_fifo
);
1174 DB_PRINT_L(0, "pushing read instruction: %02x\n",
1175 (unsigned)(uint8_t)(s
->regs
[R_LQSPI_CFG
] &
1176 LQSPI_CFG_INST_CODE
));
1177 fifo8_push(&s
->tx_fifo
, s
->regs
[R_LQSPI_CFG
] & LQSPI_CFG_INST_CODE
);
1179 DB_PRINT_L(0, "pushing read address %06x\n", flash_addr
);
1180 if (s
->regs
[R_LQSPI_CFG
] & LQSPI_CFG_ADDR4
) {
1181 fifo8_push(&s
->tx_fifo
, (uint8_t)(flash_addr
>> 24));
1183 fifo8_push(&s
->tx_fifo
, (uint8_t)(flash_addr
>> 16));
1184 fifo8_push(&s
->tx_fifo
, (uint8_t)(flash_addr
>> 8));
1185 fifo8_push(&s
->tx_fifo
, (uint8_t)flash_addr
);
1187 if (s
->regs
[R_LQSPI_CFG
] & LQSPI_CFG_MODE_EN
) {
1188 fifo8_push(&s
->tx_fifo
, extract32(s
->regs
[R_LQSPI_CFG
],
1189 LQSPI_CFG_MODE_SHIFT
,
1190 LQSPI_CFG_MODE_WIDTH
));
1193 for (i
= 0; i
< (extract32(s
->regs
[R_LQSPI_CFG
], LQSPI_CFG_DUMMY_SHIFT
,
1194 LQSPI_CFG_DUMMY_WIDTH
)); ++i
) {
1195 DB_PRINT_L(0, "pushing dummy byte\n");
1196 fifo8_push(&s
->tx_fifo
, 0);
1198 xilinx_spips_update_cs_lines(s
);
1199 xilinx_spips_flush_txfifo(s
);
1200 fifo8_reset(&s
->rx_fifo
);
1202 DB_PRINT_L(0, "starting QSPI data read\n");
1204 while (cache_entry
< LQSPI_CACHE_SIZE
) {
1205 for (i
= 0; i
< 64; ++i
) {
1206 tx_data_bytes(&s
->tx_fifo
, 0, 1, false);
1208 xilinx_spips_flush_txfifo(s
);
1209 for (i
= 0; i
< 64; ++i
) {
1210 rx_data_bytes(&s
->rx_fifo
, &q
->lqspi_buf
[cache_entry
++], 1);
1214 s
->regs
[R_LQSPI_STS
] &= ~LQSPI_CFG_U_PAGE
;
1215 s
->regs
[R_LQSPI_STS
] |= u_page_save
;
1216 xilinx_spips_update_cs_lines(s
);
1218 q
->lqspi_cached_addr
= flash_addr
* num_effective_busses(s
);
1222 static MemTxResult
lqspi_read(void *opaque
, hwaddr addr
, uint64_t *value
,
1223 unsigned size
, MemTxAttrs attrs
)
1225 XilinxQSPIPS
*q
= XILINX_QSPIPS(opaque
);
1227 if (addr
>= q
->lqspi_cached_addr
&&
1228 addr
<= q
->lqspi_cached_addr
+ LQSPI_CACHE_SIZE
- 4) {
1229 uint8_t *retp
= &q
->lqspi_buf
[addr
- q
->lqspi_cached_addr
];
1230 *value
= cpu_to_le32(*(uint32_t *)retp
);
1231 DB_PRINT_L(1, "addr: %08" HWADDR_PRIx
", data: %08" PRIx64
"\n",
1236 lqspi_load_cache(opaque
, addr
);
1237 return lqspi_read(opaque
, addr
, value
, size
, attrs
);
1240 static MemTxResult
lqspi_write(void *opaque
, hwaddr offset
, uint64_t value
,
1241 unsigned size
, MemTxAttrs attrs
)
1244 * From UG1085, Chapter 24 (Quad-SPI controllers):
1245 * - Writes are ignored
1246 * - AXI writes generate an external AXI slave error (SLVERR)
1248 qemu_log_mask(LOG_GUEST_ERROR
, "%s Unexpected %u-bit access to 0x%" PRIx64
1249 " (value: 0x%" PRIx64
"\n",
1250 __func__
, size
<< 3, offset
, value
);
1255 static const MemoryRegionOps lqspi_ops
= {
1256 .read_with_attrs
= lqspi_read
,
1257 .write_with_attrs
= lqspi_write
,
1258 .endianness
= DEVICE_NATIVE_ENDIAN
,
1260 .min_access_size
= 4,
1261 .max_access_size
= 4,
1264 .min_access_size
= 1,
1265 .max_access_size
= 4
1269 static void xilinx_spips_realize(DeviceState
*dev
, Error
**errp
)
1271 XilinxSPIPS
*s
= XILINX_SPIPS(dev
);
1272 SysBusDevice
*sbd
= SYS_BUS_DEVICE(dev
);
1273 XilinxSPIPSClass
*xsc
= XILINX_SPIPS_GET_CLASS(s
);
1276 DB_PRINT_L(0, "realized spips\n");
1278 if (s
->num_busses
> MAX_NUM_BUSSES
) {
1280 "requested number of SPI busses %u exceeds maximum %d",
1281 s
->num_busses
, MAX_NUM_BUSSES
);
1284 if (s
->num_busses
< MIN_NUM_BUSSES
) {
1286 "requested number of SPI busses %u is below minimum %d",
1287 s
->num_busses
, MIN_NUM_BUSSES
);
1291 s
->spi
= g_new(SSIBus
*, s
->num_busses
);
1292 for (i
= 0; i
< s
->num_busses
; ++i
) {
1294 snprintf(bus_name
, 16, "spi%d", i
);
1295 s
->spi
[i
] = ssi_create_bus(dev
, bus_name
);
1298 s
->cs_lines
= g_new0(qemu_irq
, s
->num_cs
* s
->num_busses
);
1299 s
->cs_lines_state
= g_new0(bool, s
->num_cs
* s
->num_busses
);
1301 sysbus_init_irq(sbd
, &s
->irq
);
1302 for (i
= 0; i
< s
->num_cs
* s
->num_busses
; ++i
) {
1303 sysbus_init_irq(sbd
, &s
->cs_lines
[i
]);
1306 memory_region_init_io(&s
->iomem
, OBJECT(s
), xsc
->reg_ops
, s
,
1307 "spi", XLNX_ZYNQMP_SPIPS_R_MAX
* 4);
1308 sysbus_init_mmio(sbd
, &s
->iomem
);
1312 fifo8_create(&s
->rx_fifo
, xsc
->rx_fifo_size
);
1313 fifo8_create(&s
->tx_fifo
, xsc
->tx_fifo_size
);
1316 static void xilinx_qspips_realize(DeviceState
*dev
, Error
**errp
)
1318 XilinxSPIPS
*s
= XILINX_SPIPS(dev
);
1319 XilinxQSPIPS
*q
= XILINX_QSPIPS(dev
);
1320 SysBusDevice
*sbd
= SYS_BUS_DEVICE(dev
);
1322 DB_PRINT_L(0, "realized qspips\n");
1326 s
->num_txrx_bytes
= 4;
1328 xilinx_spips_realize(dev
, errp
);
1329 memory_region_init_io(&s
->mmlqspi
, OBJECT(s
), &lqspi_ops
, s
, "lqspi",
1330 (1 << LQSPI_ADDRESS_BITS
) * 2);
1331 sysbus_init_mmio(sbd
, &s
->mmlqspi
);
1333 q
->lqspi_cached_addr
= ~0ULL;
1336 static void xlnx_zynqmp_qspips_realize(DeviceState
*dev
, Error
**errp
)
1338 XlnxZynqMPQSPIPS
*s
= XLNX_ZYNQMP_QSPIPS(dev
);
1339 XilinxSPIPSClass
*xsc
= XILINX_SPIPS_GET_CLASS(s
);
1341 if (s
->dma_burst_size
> QSPI_DMA_MAX_BURST_SIZE
) {
1343 "qspi dma burst size %u exceeds maximum limit %d",
1344 s
->dma_burst_size
, QSPI_DMA_MAX_BURST_SIZE
);
1347 xilinx_qspips_realize(dev
, errp
);
1348 fifo8_create(&s
->rx_fifo_g
, xsc
->rx_fifo_size
);
1349 fifo8_create(&s
->tx_fifo_g
, xsc
->tx_fifo_size
);
1350 fifo32_create(&s
->fifo_g
, 32);
1353 static void xlnx_zynqmp_qspips_init(Object
*obj
)
1355 XlnxZynqMPQSPIPS
*rq
= XLNX_ZYNQMP_QSPIPS(obj
);
1357 object_property_add_link(obj
, "stream-connected-dma", TYPE_STREAM_SINK
,
1358 (Object
**)&rq
->dma
,
1359 object_property_allow_set_link
,
1360 OBJ_PROP_LINK_STRONG
);
1363 static int xilinx_spips_post_load(void *opaque
, int version_id
)
1365 xilinx_spips_update_ixr((XilinxSPIPS
*)opaque
);
1366 xilinx_spips_update_cs_lines((XilinxSPIPS
*)opaque
);
1370 static const VMStateDescription vmstate_xilinx_spips
= {
1371 .name
= "xilinx_spips",
1373 .minimum_version_id
= 2,
1374 .post_load
= xilinx_spips_post_load
,
1375 .fields
= (VMStateField
[]) {
1376 VMSTATE_FIFO8(tx_fifo
, XilinxSPIPS
),
1377 VMSTATE_FIFO8(rx_fifo
, XilinxSPIPS
),
1378 VMSTATE_UINT32_ARRAY(regs
, XilinxSPIPS
, XLNX_SPIPS_R_MAX
),
1379 VMSTATE_UINT8(snoop_state
, XilinxSPIPS
),
1380 VMSTATE_END_OF_LIST()
1384 static int xlnx_zynqmp_qspips_post_load(void *opaque
, int version_id
)
1386 XlnxZynqMPQSPIPS
*s
= (XlnxZynqMPQSPIPS
*)opaque
;
1387 XilinxSPIPS
*qs
= XILINX_SPIPS(s
);
1389 if (ARRAY_FIELD_EX32(s
->regs
, GQSPI_SELECT
, GENERIC_QSPI_EN
) &&
1390 fifo8_is_empty(&qs
->rx_fifo
) && fifo8_is_empty(&qs
->tx_fifo
)) {
1391 xlnx_zynqmp_qspips_update_ixr(s
);
1392 xlnx_zynqmp_qspips_update_cs_lines(s
);
1397 static const VMStateDescription vmstate_xilinx_qspips
= {
1398 .name
= "xilinx_qspips",
1400 .minimum_version_id
= 1,
1401 .fields
= (VMStateField
[]) {
1402 VMSTATE_STRUCT(parent_obj
, XilinxQSPIPS
, 0,
1403 vmstate_xilinx_spips
, XilinxSPIPS
),
1404 VMSTATE_END_OF_LIST()
1408 static const VMStateDescription vmstate_xlnx_zynqmp_qspips
= {
1409 .name
= "xlnx_zynqmp_qspips",
1411 .minimum_version_id
= 1,
1412 .post_load
= xlnx_zynqmp_qspips_post_load
,
1413 .fields
= (VMStateField
[]) {
1414 VMSTATE_STRUCT(parent_obj
, XlnxZynqMPQSPIPS
, 0,
1415 vmstate_xilinx_qspips
, XilinxQSPIPS
),
1416 VMSTATE_FIFO8(tx_fifo_g
, XlnxZynqMPQSPIPS
),
1417 VMSTATE_FIFO8(rx_fifo_g
, XlnxZynqMPQSPIPS
),
1418 VMSTATE_FIFO32(fifo_g
, XlnxZynqMPQSPIPS
),
1419 VMSTATE_UINT32_ARRAY(regs
, XlnxZynqMPQSPIPS
, XLNX_ZYNQMP_SPIPS_R_MAX
),
1420 VMSTATE_END_OF_LIST()
1424 static Property xilinx_zynqmp_qspips_properties
[] = {
1425 DEFINE_PROP_UINT32("dma-burst-size", XlnxZynqMPQSPIPS
, dma_burst_size
, 64),
1426 DEFINE_PROP_END_OF_LIST(),
1429 static Property xilinx_spips_properties
[] = {
1430 DEFINE_PROP_UINT8("num-busses", XilinxSPIPS
, num_busses
, 1),
1431 DEFINE_PROP_UINT8("num-ss-bits", XilinxSPIPS
, num_cs
, 4),
1432 DEFINE_PROP_UINT8("num-txrx-bytes", XilinxSPIPS
, num_txrx_bytes
, 1),
1433 DEFINE_PROP_END_OF_LIST(),
1436 static void xilinx_qspips_class_init(ObjectClass
*klass
, void * data
)
1438 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1439 XilinxSPIPSClass
*xsc
= XILINX_SPIPS_CLASS(klass
);
1441 dc
->realize
= xilinx_qspips_realize
;
1442 xsc
->reg_ops
= &qspips_ops
;
1443 xsc
->rx_fifo_size
= RXFF_A_Q
;
1444 xsc
->tx_fifo_size
= TXFF_A_Q
;
1447 static void xilinx_spips_class_init(ObjectClass
*klass
, void *data
)
1449 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1450 XilinxSPIPSClass
*xsc
= XILINX_SPIPS_CLASS(klass
);
1452 dc
->realize
= xilinx_spips_realize
;
1453 dc
->reset
= xilinx_spips_reset
;
1454 device_class_set_props(dc
, xilinx_spips_properties
);
1455 dc
->vmsd
= &vmstate_xilinx_spips
;
1457 xsc
->reg_ops
= &spips_ops
;
1458 xsc
->rx_fifo_size
= RXFF_A
;
1459 xsc
->tx_fifo_size
= TXFF_A
;
1462 static void xlnx_zynqmp_qspips_class_init(ObjectClass
*klass
, void * data
)
1464 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1465 XilinxSPIPSClass
*xsc
= XILINX_SPIPS_CLASS(klass
);
1467 dc
->realize
= xlnx_zynqmp_qspips_realize
;
1468 dc
->reset
= xlnx_zynqmp_qspips_reset
;
1469 dc
->vmsd
= &vmstate_xlnx_zynqmp_qspips
;
1470 device_class_set_props(dc
, xilinx_zynqmp_qspips_properties
);
1471 xsc
->reg_ops
= &xlnx_zynqmp_qspips_ops
;
1472 xsc
->rx_fifo_size
= RXFF_A_Q
;
1473 xsc
->tx_fifo_size
= TXFF_A_Q
;
1476 static const TypeInfo xilinx_spips_info
= {
1477 .name
= TYPE_XILINX_SPIPS
,
1478 .parent
= TYPE_SYS_BUS_DEVICE
,
1479 .instance_size
= sizeof(XilinxSPIPS
),
1480 .class_init
= xilinx_spips_class_init
,
1481 .class_size
= sizeof(XilinxSPIPSClass
),
1484 static const TypeInfo xilinx_qspips_info
= {
1485 .name
= TYPE_XILINX_QSPIPS
,
1486 .parent
= TYPE_XILINX_SPIPS
,
1487 .instance_size
= sizeof(XilinxQSPIPS
),
1488 .class_init
= xilinx_qspips_class_init
,
1491 static const TypeInfo xlnx_zynqmp_qspips_info
= {
1492 .name
= TYPE_XLNX_ZYNQMP_QSPIPS
,
1493 .parent
= TYPE_XILINX_QSPIPS
,
1494 .instance_size
= sizeof(XlnxZynqMPQSPIPS
),
1495 .instance_init
= xlnx_zynqmp_qspips_init
,
1496 .class_init
= xlnx_zynqmp_qspips_class_init
,
1499 static void xilinx_spips_register_types(void)
1501 type_register_static(&xilinx_spips_info
);
1502 type_register_static(&xilinx_qspips_info
);
1503 type_register_static(&xlnx_zynqmp_qspips_info
);
1506 type_init(xilinx_spips_register_types
)