hw/char/etraxfs_ser.c

   1 /*
   2  * QEMU ETRAX System Emulator
   3  *
   4  * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB.
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "qemu/osdep.h"
  26 #include "hw/irq.h"
  27 #include "hw/qdev-properties.h"
  28 #include "hw/sysbus.h"
  29 #include "chardev/char-fe.h"
  30 #include "qemu/log.h"
  31 #include "qemu/module.h"
  32
  33 #define D(x)
  34
  35 #define RW_TR_CTRL     (0x00 / 4)
  36 #define RW_TR_DMA_EN   (0x04 / 4)
  37 #define RW_REC_CTRL    (0x08 / 4)
  38 #define RW_DOUT        (0x1c / 4)
  39 #define RS_STAT_DIN    (0x20 / 4)
  40 #define R_STAT_DIN     (0x24 / 4)
  41 #define RW_INTR_MASK   (0x2c / 4)
  42 #define RW_ACK_INTR    (0x30 / 4)
  43 #define R_INTR         (0x34 / 4)
  44 #define R_MASKED_INTR  (0x38 / 4)
  45 #define R_MAX          (0x3c / 4)
  46
  47 #define STAT_DAV     16
  48 #define STAT_TR_IDLE 22
  49 #define STAT_TR_RDY  24
  50
  51 #define TYPE_ETRAX_FS_SERIAL "etraxfs,serial"
  52 #define ETRAX_SERIAL(obj) \
  53     OBJECT_CHECK(ETRAXSerial, (obj), TYPE_ETRAX_FS_SERIAL)
  54
  55 typedef struct ETRAXSerial {
  56     SysBusDevice parent_obj;
  57
  58     MemoryRegion mmio;
  59     CharBackend chr;
  60     qemu_irq irq;
  61
  62     int pending_tx;
  63
  64     uint8_t rx_fifo[16];
  65     unsigned int rx_fifo_pos;
  66     unsigned int rx_fifo_len;
  67
  68     /* Control registers.  */
  69     uint32_t regs[R_MAX];
  70 } ETRAXSerial;
  71
  72 static void ser_update_irq(ETRAXSerial *s)
  73 {
  74
  75     if (s->rx_fifo_len) {
  76         s->regs[R_INTR] |= 8;
  77     } else {
  78         s->regs[R_INTR] &= ~8;
  79     }
  80
  81     s->regs[R_MASKED_INTR] = s->regs[R_INTR] & s->regs[RW_INTR_MASK];
  82     qemu_set_irq(s->irq, !!s->regs[R_MASKED_INTR]);
  83 }
  84
  85 static uint64_t
  86 ser_read(void *opaque, hwaddr addr, unsigned int size)
  87 {
  88     ETRAXSerial *s = opaque;
  89     uint32_t r = 0;
  90
  91     addr >>= 2;
  92     switch (addr)
  93     {
  94         case R_STAT_DIN:
  95             r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
  96             if (s->rx_fifo_len) {
  97                 r |= 1 << STAT_DAV;
  98             }
  99             r |= 1 << STAT_TR_RDY;
 100             r |= 1 << STAT_TR_IDLE;
 101             break;
 102         case RS_STAT_DIN:
 103             r = s->rx_fifo[(s->rx_fifo_pos - s->rx_fifo_len) & 15];
 104             if (s->rx_fifo_len) {
 105                 r |= 1 << STAT_DAV;
 106                 s->rx_fifo_len--;
 107             }
 108             r |= 1 << STAT_TR_RDY;
 109             r |= 1 << STAT_TR_IDLE;
 110             break;
 111         default:
 112             r = s->regs[addr];
 113             D(qemu_log("%s " TARGET_FMT_plx "=%x\n", __func__, addr, r));
 114             break;
 115     }
 116     return r;
 117 }
 118
 119 static void
 120 ser_write(void *opaque, hwaddr addr,
 121           uint64_t val64, unsigned int size)
 122 {
 123     ETRAXSerial *s = opaque;
 124     uint32_t value = val64;
 125     unsigned char ch = val64;
 126
 127     D(qemu_log("%s " TARGET_FMT_plx "=%x\n",  __func__, addr, value));
 128     addr >>= 2;
 129     switch (addr)
 130     {
 131         case RW_DOUT:
 132             /* XXX this blocks entire thread. Rewrite to use
 133              * qemu_chr_fe_write and background I/O callbacks */
 134             qemu_chr_fe_write_all(&s->chr, &ch, 1);
 135             s->regs[R_INTR] |= 3;
 136             s->pending_tx = 1;
 137             s->regs[addr] = value;
 138             break;
 139         case RW_ACK_INTR:
 140             if (s->pending_tx) {
 141                 value &= ~1;
 142                 s->pending_tx = 0;
 143                 D(qemu_log("fixedup value=%x r_intr=%x\n",
 144                            value, s->regs[R_INTR]));
 145             }
 146             s->regs[addr] = value;
 147             s->regs[R_INTR] &= ~value;
 148             D(printf("r_intr=%x\n", s->regs[R_INTR]));
 149             break;
 150         default:
 151             s->regs[addr] = value;
 152             break;
 153     }
 154     ser_update_irq(s);
 155 }
 156
 157 static const MemoryRegionOps ser_ops = {
 158     .read = ser_read,
 159     .write = ser_write,
 160     .endianness = DEVICE_NATIVE_ENDIAN,
 161     .valid = {
 162         .min_access_size = 4,
 163         .max_access_size = 4
 164     }
 165 };
 166
 167 static Property etraxfs_ser_properties[] = {
 168     DEFINE_PROP_CHR("chardev", ETRAXSerial, chr),
 169     DEFINE_PROP_END_OF_LIST(),
 170 };
 171
 172 static void serial_receive(void *opaque, const uint8_t *buf, int size)
 173 {
 174     ETRAXSerial *s = opaque;
 175     int i;
 176
 177     /* Got a byte.  */
 178     if (s->rx_fifo_len >= 16) {
 179         D(qemu_log("WARNING: UART dropped char.\n"));
 180         return;
 181     }
 182
 183     for (i = 0; i < size; i++) {
 184         s->rx_fifo[s->rx_fifo_pos] = buf[i];
 185         s->rx_fifo_pos++;
 186         s->rx_fifo_pos &= 15;
 187         s->rx_fifo_len++;
 188     }
 189
 190     ser_update_irq(s);
 191 }
 192
 193 static int serial_can_receive(void *opaque)
 194 {
 195     ETRAXSerial *s = opaque;
 196
 197     /* Is the receiver enabled?  */
 198     if (!(s->regs[RW_REC_CTRL] & (1 << 3))) {
 199         return 0;
 200     }
 201
 202     return sizeof(s->rx_fifo) - s->rx_fifo_len;
 203 }
 204
 205 static void serial_event(void *opaque, QEMUChrEvent event)
 206 {
 207
 208 }
 209
 210 static void etraxfs_ser_reset(DeviceState *d)
 211 {
 212     ETRAXSerial *s = ETRAX_SERIAL(d);
 213
 214     /* transmitter begins ready and idle.  */
 215     s->regs[RS_STAT_DIN] |= (1 << STAT_TR_RDY);
 216     s->regs[RS_STAT_DIN] |= (1 << STAT_TR_IDLE);
 217
 218     s->regs[RW_REC_CTRL] = 0x10000;
 219
 220 }
 221
 222 static void etraxfs_ser_init(Object *obj)
 223 {
 224     ETRAXSerial *s = ETRAX_SERIAL(obj);
 225     SysBusDevice *dev = SYS_BUS_DEVICE(obj);
 226
 227     sysbus_init_irq(dev, &s->irq);
 228     memory_region_init_io(&s->mmio, obj, &ser_ops, s,
 229                           "etraxfs-serial", R_MAX * 4);
 230     sysbus_init_mmio(dev, &s->mmio);
 231 }
 232
 233 static void etraxfs_ser_realize(DeviceState *dev, Error **errp)
 234 {
 235     ETRAXSerial *s = ETRAX_SERIAL(dev);
 236
 237     qemu_chr_fe_set_handlers(&s->chr,
 238                              serial_can_receive, serial_receive,
 239                              serial_event, NULL, s, NULL, true);
 240 }
 241
 242 static void etraxfs_ser_class_init(ObjectClass *klass, void *data)
 243 {
 244     DeviceClass *dc = DEVICE_CLASS(klass);
 245
 246     dc->reset = etraxfs_ser_reset;
 247     dc->props = etraxfs_ser_properties;
 248     dc->realize = etraxfs_ser_realize;
 249 }
 250
 251 static const TypeInfo etraxfs_ser_info = {
 252     .name          = TYPE_ETRAX_FS_SERIAL,
 253     .parent        = TYPE_SYS_BUS_DEVICE,
 254     .instance_size = sizeof(ETRAXSerial),
 255     .instance_init = etraxfs_ser_init,
 256     .class_init    = etraxfs_ser_class_init,
 257 };
 258
 259 static void etraxfs_serial_register_types(void)
 260 {
 261     type_register_static(&etraxfs_ser_info);
 262 }
 263
 264 type_init(etraxfs_serial_register_types)