tests/fp/fp-test: add floating point tests
[qemu/ar7.git] / hw / sd / sdhci.c
blob81bbf0327940dfeb1c62c312a946686f16dcb3c2
1 /*
2 * SD Association Host Standard Specification v2.0 controller emulation
4 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
5 * Mitsyanko Igor <i.mitsyanko@samsung.com>
6 * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
8 * Based on MMC controller for Samsung S5PC1xx-based board emulation
9 * by Alexey Merkulov and Vladimir Monakhov.
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
19 * See the GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License along
22 * with this program; if not, see <http://www.gnu.org/licenses/>.
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "qemu/error-report.h"
28 #include "qapi/error.h"
29 #include "hw/hw.h"
30 #include "sysemu/dma.h"
31 #include "qemu/timer.h"
32 #include "qemu/bitops.h"
33 #include "hw/sd/sdhci.h"
34 #include "sdhci-internal.h"
35 #include "qemu/log.h"
36 #include "trace.h"
38 #define TYPE_SDHCI_BUS "sdhci-bus"
39 #define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS)
41 #define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val))
43 /* Default SD/MMC host controller features information, which will be
44 * presented in CAPABILITIES register of generic SD host controller at reset.
46 * support:
47 * - 3.3v and 1.8v voltages
48 * - SDMA/ADMA1/ADMA2
49 * - high-speed
50 * max host controller R/W buffers size: 512B
51 * max clock frequency for SDclock: 52 MHz
52 * timeout clock frequency: 52 MHz
54 * does not support:
55 * - 3.0v voltage
56 * - 64-bit system bus
57 * - suspend/resume
59 #define SDHC_CAPAB_REG_DEFAULT 0x057834b4
61 static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
63 return 1 << (9 + FIELD_EX32(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH));
66 /* return true on error */
67 static bool sdhci_check_capab_freq_range(SDHCIState *s, const char *desc,
68 uint8_t freq, Error **errp)
70 if (s->sd_spec_version >= 3) {
71 return false;
73 switch (freq) {
74 case 0:
75 case 10 ... 63:
76 break;
77 default:
78 error_setg(errp, "SD %s clock frequency can have value"
79 "in range 0-63 only", desc);
80 return true;
82 return false;
85 static void sdhci_check_capareg(SDHCIState *s, Error **errp)
87 uint64_t msk = s->capareg;
88 uint32_t val;
89 bool y;
91 switch (s->sd_spec_version) {
92 case 4:
93 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT_V4);
94 trace_sdhci_capareg("64-bit system bus (v4)", val);
95 msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT_V4, 0);
97 val = FIELD_EX64(s->capareg, SDHC_CAPAB, UHS_II);
98 trace_sdhci_capareg("UHS-II", val);
99 msk = FIELD_DP64(msk, SDHC_CAPAB, UHS_II, 0);
101 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA3);
102 trace_sdhci_capareg("ADMA3", val);
103 msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA3, 0);
105 /* fallthrough */
106 case 3:
107 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ASYNC_INT);
108 trace_sdhci_capareg("async interrupt", val);
109 msk = FIELD_DP64(msk, SDHC_CAPAB, ASYNC_INT, 0);
111 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SLOT_TYPE);
112 if (val) {
113 error_setg(errp, "slot-type not supported");
114 return;
116 trace_sdhci_capareg("slot type", val);
117 msk = FIELD_DP64(msk, SDHC_CAPAB, SLOT_TYPE, 0);
119 if (val != 2) {
120 val = FIELD_EX64(s->capareg, SDHC_CAPAB, EMBEDDED_8BIT);
121 trace_sdhci_capareg("8-bit bus", val);
123 msk = FIELD_DP64(msk, SDHC_CAPAB, EMBEDDED_8BIT, 0);
125 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS_SPEED);
126 trace_sdhci_capareg("bus speed mask", val);
127 msk = FIELD_DP64(msk, SDHC_CAPAB, BUS_SPEED, 0);
129 val = FIELD_EX64(s->capareg, SDHC_CAPAB, DRIVER_STRENGTH);
130 trace_sdhci_capareg("driver strength mask", val);
131 msk = FIELD_DP64(msk, SDHC_CAPAB, DRIVER_STRENGTH, 0);
133 val = FIELD_EX64(s->capareg, SDHC_CAPAB, TIMER_RETUNING);
134 trace_sdhci_capareg("timer re-tuning", val);
135 msk = FIELD_DP64(msk, SDHC_CAPAB, TIMER_RETUNING, 0);
137 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDR50_TUNING);
138 trace_sdhci_capareg("use SDR50 tuning", val);
139 msk = FIELD_DP64(msk, SDHC_CAPAB, SDR50_TUNING, 0);
141 val = FIELD_EX64(s->capareg, SDHC_CAPAB, RETUNING_MODE);
142 trace_sdhci_capareg("re-tuning mode", val);
143 msk = FIELD_DP64(msk, SDHC_CAPAB, RETUNING_MODE, 0);
145 val = FIELD_EX64(s->capareg, SDHC_CAPAB, CLOCK_MULT);
146 trace_sdhci_capareg("clock multiplier", val);
147 msk = FIELD_DP64(msk, SDHC_CAPAB, CLOCK_MULT, 0);
149 /* fallthrough */
150 case 2: /* default version */
151 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA2);
152 trace_sdhci_capareg("ADMA2", val);
153 msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA2, 0);
155 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA1);
156 trace_sdhci_capareg("ADMA1", val);
157 msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA1, 0);
159 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT);
160 trace_sdhci_capareg("64-bit system bus (v3)", val);
161 msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT, 0);
163 /* fallthrough */
164 case 1:
165 y = FIELD_EX64(s->capareg, SDHC_CAPAB, TOUNIT);
166 msk = FIELD_DP64(msk, SDHC_CAPAB, TOUNIT, 0);
168 val = FIELD_EX64(s->capareg, SDHC_CAPAB, TOCLKFREQ);
169 trace_sdhci_capareg(y ? "timeout (MHz)" : "Timeout (KHz)", val);
170 if (sdhci_check_capab_freq_range(s, "timeout", val, errp)) {
171 return;
173 msk = FIELD_DP64(msk, SDHC_CAPAB, TOCLKFREQ, 0);
175 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BASECLKFREQ);
176 trace_sdhci_capareg(y ? "base (MHz)" : "Base (KHz)", val);
177 if (sdhci_check_capab_freq_range(s, "base", val, errp)) {
178 return;
180 msk = FIELD_DP64(msk, SDHC_CAPAB, BASECLKFREQ, 0);
182 val = FIELD_EX64(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH);
183 if (val >= 3) {
184 error_setg(errp, "block size can be 512, 1024 or 2048 only");
185 return;
187 trace_sdhci_capareg("max block length", sdhci_get_fifolen(s));
188 msk = FIELD_DP64(msk, SDHC_CAPAB, MAXBLOCKLENGTH, 0);
190 val = FIELD_EX64(s->capareg, SDHC_CAPAB, HIGHSPEED);
191 trace_sdhci_capareg("high speed", val);
192 msk = FIELD_DP64(msk, SDHC_CAPAB, HIGHSPEED, 0);
194 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDMA);
195 trace_sdhci_capareg("SDMA", val);
196 msk = FIELD_DP64(msk, SDHC_CAPAB, SDMA, 0);
198 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SUSPRESUME);
199 trace_sdhci_capareg("suspend/resume", val);
200 msk = FIELD_DP64(msk, SDHC_CAPAB, SUSPRESUME, 0);
202 val = FIELD_EX64(s->capareg, SDHC_CAPAB, V33);
203 trace_sdhci_capareg("3.3v", val);
204 msk = FIELD_DP64(msk, SDHC_CAPAB, V33, 0);
206 val = FIELD_EX64(s->capareg, SDHC_CAPAB, V30);
207 trace_sdhci_capareg("3.0v", val);
208 msk = FIELD_DP64(msk, SDHC_CAPAB, V30, 0);
210 val = FIELD_EX64(s->capareg, SDHC_CAPAB, V18);
211 trace_sdhci_capareg("1.8v", val);
212 msk = FIELD_DP64(msk, SDHC_CAPAB, V18, 0);
213 break;
215 default:
216 error_setg(errp, "Unsupported spec version: %u", s->sd_spec_version);
218 if (msk) {
219 qemu_log_mask(LOG_UNIMP,
220 "SDHCI: unknown CAPAB mask: 0x%016" PRIx64 "\n", msk);
224 static uint8_t sdhci_slotint(SDHCIState *s)
226 return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) ||
227 ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) ||
228 ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV));
231 static inline void sdhci_update_irq(SDHCIState *s)
233 qemu_set_irq(s->irq, sdhci_slotint(s));
236 static void sdhci_raise_insertion_irq(void *opaque)
238 SDHCIState *s = (SDHCIState *)opaque;
240 if (s->norintsts & SDHC_NIS_REMOVE) {
241 timer_mod(s->insert_timer,
242 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
243 } else {
244 s->prnsts = 0x1ff0000;
245 if (s->norintstsen & SDHC_NISEN_INSERT) {
246 s->norintsts |= SDHC_NIS_INSERT;
248 sdhci_update_irq(s);
252 static void sdhci_set_inserted(DeviceState *dev, bool level)
254 SDHCIState *s = (SDHCIState *)dev;
256 trace_sdhci_set_inserted(level ? "insert" : "eject");
257 if ((s->norintsts & SDHC_NIS_REMOVE) && level) {
258 /* Give target some time to notice card ejection */
259 timer_mod(s->insert_timer,
260 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
261 } else {
262 if (level) {
263 s->prnsts = 0x1ff0000;
264 if (s->norintstsen & SDHC_NISEN_INSERT) {
265 s->norintsts |= SDHC_NIS_INSERT;
267 } else {
268 s->prnsts = 0x1fa0000;
269 s->pwrcon &= ~SDHC_POWER_ON;
270 s->clkcon &= ~SDHC_CLOCK_SDCLK_EN;
271 if (s->norintstsen & SDHC_NISEN_REMOVE) {
272 s->norintsts |= SDHC_NIS_REMOVE;
275 sdhci_update_irq(s);
279 static void sdhci_set_readonly(DeviceState *dev, bool level)
281 SDHCIState *s = (SDHCIState *)dev;
283 if (level) {
284 s->prnsts &= ~SDHC_WRITE_PROTECT;
285 } else {
286 /* Write enabled */
287 s->prnsts |= SDHC_WRITE_PROTECT;
291 static void sdhci_reset(SDHCIState *s)
293 DeviceState *dev = DEVICE(s);
295 timer_del(s->insert_timer);
296 timer_del(s->transfer_timer);
298 /* Set all registers to 0. Capabilities/Version registers are not cleared
299 * and assumed to always preserve their value, given to them during
300 * initialization */
301 memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
303 /* Reset other state based on current card insertion/readonly status */
304 sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
305 sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
307 s->data_count = 0;
308 s->stopped_state = sdhc_not_stopped;
309 s->pending_insert_state = false;
312 static void sdhci_poweron_reset(DeviceState *dev)
314 /* QOM (ie power-on) reset. This is identical to reset
315 * commanded via device register apart from handling of the
316 * 'pending insert on powerup' quirk.
318 SDHCIState *s = (SDHCIState *)dev;
320 sdhci_reset(s);
322 if (s->pending_insert_quirk) {
323 s->pending_insert_state = true;
327 static void sdhci_data_transfer(void *opaque);
329 static void sdhci_send_command(SDHCIState *s)
331 SDRequest request;
332 uint8_t response[16];
333 int rlen;
335 s->errintsts = 0;
336 s->acmd12errsts = 0;
337 request.cmd = s->cmdreg >> 8;
338 request.arg = s->argument;
340 trace_sdhci_send_command(request.cmd, request.arg);
341 rlen = sdbus_do_command(&s->sdbus, &request, response);
343 if (s->cmdreg & SDHC_CMD_RESPONSE) {
344 if (rlen == 4) {
345 s->rspreg[0] = ldl_be_p(response);
346 s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0;
347 trace_sdhci_response4(s->rspreg[0]);
348 } else if (rlen == 16) {
349 s->rspreg[0] = ldl_be_p(&response[11]);
350 s->rspreg[1] = ldl_be_p(&response[7]);
351 s->rspreg[2] = ldl_be_p(&response[3]);
352 s->rspreg[3] = (response[0] << 16) | (response[1] << 8) |
353 response[2];
354 trace_sdhci_response16(s->rspreg[3], s->rspreg[2],
355 s->rspreg[1], s->rspreg[0]);
356 } else {
357 trace_sdhci_error("timeout waiting for command response");
358 if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) {
359 s->errintsts |= SDHC_EIS_CMDTIMEOUT;
360 s->norintsts |= SDHC_NIS_ERR;
364 if (!(s->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) &&
365 (s->norintstsen & SDHC_NISEN_TRSCMP) &&
366 (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) {
367 s->norintsts |= SDHC_NIS_TRSCMP;
371 if (s->norintstsen & SDHC_NISEN_CMDCMP) {
372 s->norintsts |= SDHC_NIS_CMDCMP;
375 sdhci_update_irq(s);
377 if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) {
378 s->data_count = 0;
379 sdhci_data_transfer(s);
383 static void sdhci_end_transfer(SDHCIState *s)
385 /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */
386 if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) {
387 SDRequest request;
388 uint8_t response[16];
390 request.cmd = 0x0C;
391 request.arg = 0;
392 trace_sdhci_end_transfer(request.cmd, request.arg);
393 sdbus_do_command(&s->sdbus, &request, response);
394 /* Auto CMD12 response goes to the upper Response register */
395 s->rspreg[3] = ldl_be_p(response);
398 s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE |
399 SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT |
400 SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE);
402 if (s->norintstsen & SDHC_NISEN_TRSCMP) {
403 s->norintsts |= SDHC_NIS_TRSCMP;
406 sdhci_update_irq(s);
410 * Programmed i/o data transfer
412 #define BLOCK_SIZE_MASK (4 * KiB - 1)
414 /* Fill host controller's read buffer with BLKSIZE bytes of data from card */
415 static void sdhci_read_block_from_card(SDHCIState *s)
417 int index = 0;
418 uint8_t data;
419 const uint16_t blk_size = s->blksize & BLOCK_SIZE_MASK;
421 if ((s->trnmod & SDHC_TRNS_MULTI) &&
422 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) {
423 return;
426 for (index = 0; index < blk_size; index++) {
427 data = sdbus_read_data(&s->sdbus);
428 if (!FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
429 /* Device is not in tuning */
430 s->fifo_buffer[index] = data;
434 if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
435 /* Device is in tuning */
436 s->hostctl2 &= ~R_SDHC_HOSTCTL2_EXECUTE_TUNING_MASK;
437 s->hostctl2 |= R_SDHC_HOSTCTL2_SAMPLING_CLKSEL_MASK;
438 s->prnsts &= ~(SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ |
439 SDHC_DATA_INHIBIT);
440 goto read_done;
443 /* New data now available for READ through Buffer Port Register */
444 s->prnsts |= SDHC_DATA_AVAILABLE;
445 if (s->norintstsen & SDHC_NISEN_RBUFRDY) {
446 s->norintsts |= SDHC_NIS_RBUFRDY;
449 /* Clear DAT line active status if that was the last block */
450 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
451 ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) {
452 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
455 /* If stop at block gap request was set and it's not the last block of
456 * data - generate Block Event interrupt */
457 if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) &&
458 s->blkcnt != 1) {
459 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
460 if (s->norintstsen & SDHC_EISEN_BLKGAP) {
461 s->norintsts |= SDHC_EIS_BLKGAP;
465 read_done:
466 sdhci_update_irq(s);
469 /* Read @size byte of data from host controller @s BUFFER DATA PORT register */
470 static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size)
472 uint32_t value = 0;
473 int i;
475 /* first check that a valid data exists in host controller input buffer */
476 if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) {
477 trace_sdhci_error("read from empty buffer");
478 return 0;
481 for (i = 0; i < size; i++) {
482 value |= s->fifo_buffer[s->data_count] << i * 8;
483 s->data_count++;
484 /* check if we've read all valid data (blksize bytes) from buffer */
485 if ((s->data_count) >= (s->blksize & BLOCK_SIZE_MASK)) {
486 trace_sdhci_read_dataport(s->data_count);
487 s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */
488 s->data_count = 0; /* next buff read must start at position [0] */
490 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
491 s->blkcnt--;
494 /* if that was the last block of data */
495 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
496 ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) ||
497 /* stop at gap request */
498 (s->stopped_state == sdhc_gap_read &&
499 !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) {
500 sdhci_end_transfer(s);
501 } else { /* if there are more data, read next block from card */
502 sdhci_read_block_from_card(s);
504 break;
508 return value;
511 /* Write data from host controller FIFO to card */
512 static void sdhci_write_block_to_card(SDHCIState *s)
514 int index = 0;
516 if (s->prnsts & SDHC_SPACE_AVAILABLE) {
517 if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
518 s->norintsts |= SDHC_NIS_WBUFRDY;
520 sdhci_update_irq(s);
521 return;
524 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
525 if (s->blkcnt == 0) {
526 return;
527 } else {
528 s->blkcnt--;
532 for (index = 0; index < (s->blksize & BLOCK_SIZE_MASK); index++) {
533 sdbus_write_data(&s->sdbus, s->fifo_buffer[index]);
536 /* Next data can be written through BUFFER DATORT register */
537 s->prnsts |= SDHC_SPACE_AVAILABLE;
539 /* Finish transfer if that was the last block of data */
540 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
541 ((s->trnmod & SDHC_TRNS_MULTI) &&
542 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) {
543 sdhci_end_transfer(s);
544 } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
545 s->norintsts |= SDHC_NIS_WBUFRDY;
548 /* Generate Block Gap Event if requested and if not the last block */
549 if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) &&
550 s->blkcnt > 0) {
551 s->prnsts &= ~SDHC_DOING_WRITE;
552 if (s->norintstsen & SDHC_EISEN_BLKGAP) {
553 s->norintsts |= SDHC_EIS_BLKGAP;
555 sdhci_end_transfer(s);
558 sdhci_update_irq(s);
561 /* Write @size bytes of @value data to host controller @s Buffer Data Port
562 * register */
563 static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size)
565 unsigned i;
567 /* Check that there is free space left in a buffer */
568 if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) {
569 trace_sdhci_error("Can't write to data buffer: buffer full");
570 return;
573 for (i = 0; i < size; i++) {
574 s->fifo_buffer[s->data_count] = value & 0xFF;
575 s->data_count++;
576 value >>= 8;
577 if (s->data_count >= (s->blksize & BLOCK_SIZE_MASK)) {
578 trace_sdhci_write_dataport(s->data_count);
579 s->data_count = 0;
580 s->prnsts &= ~SDHC_SPACE_AVAILABLE;
581 if (s->prnsts & SDHC_DOING_WRITE) {
582 sdhci_write_block_to_card(s);
589 * Single DMA data transfer
592 /* Multi block SDMA transfer */
593 static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
595 bool page_aligned = false;
596 unsigned int n, begin;
597 const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK;
598 uint32_t boundary_chk = 1 << (((s->blksize & ~BLOCK_SIZE_MASK) >> 12) + 12);
599 uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk);
601 if (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || !s->blkcnt) {
602 qemu_log_mask(LOG_UNIMP, "infinite transfer is not supported\n");
603 return;
606 /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for
607 * possible stop at page boundary if initial address is not page aligned,
608 * allow them to work properly */
609 if ((s->sdmasysad % boundary_chk) == 0) {
610 page_aligned = true;
613 if (s->trnmod & SDHC_TRNS_READ) {
614 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
615 SDHC_DAT_LINE_ACTIVE;
616 while (s->blkcnt) {
617 if (s->data_count == 0) {
618 for (n = 0; n < block_size; n++) {
619 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
622 begin = s->data_count;
623 if (((boundary_count + begin) < block_size) && page_aligned) {
624 s->data_count = boundary_count + begin;
625 boundary_count = 0;
626 } else {
627 s->data_count = block_size;
628 boundary_count -= block_size - begin;
629 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
630 s->blkcnt--;
633 dma_memory_write(s->dma_as, s->sdmasysad,
634 &s->fifo_buffer[begin], s->data_count - begin);
635 s->sdmasysad += s->data_count - begin;
636 if (s->data_count == block_size) {
637 s->data_count = 0;
639 if (page_aligned && boundary_count == 0) {
640 break;
643 } else {
644 s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT |
645 SDHC_DAT_LINE_ACTIVE;
646 while (s->blkcnt) {
647 begin = s->data_count;
648 if (((boundary_count + begin) < block_size) && page_aligned) {
649 s->data_count = boundary_count + begin;
650 boundary_count = 0;
651 } else {
652 s->data_count = block_size;
653 boundary_count -= block_size - begin;
655 dma_memory_read(s->dma_as, s->sdmasysad,
656 &s->fifo_buffer[begin], s->data_count - begin);
657 s->sdmasysad += s->data_count - begin;
658 if (s->data_count == block_size) {
659 for (n = 0; n < block_size; n++) {
660 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
662 s->data_count = 0;
663 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
664 s->blkcnt--;
667 if (page_aligned && boundary_count == 0) {
668 break;
673 if (s->blkcnt == 0) {
674 sdhci_end_transfer(s);
675 } else {
676 if (s->norintstsen & SDHC_NISEN_DMA) {
677 s->norintsts |= SDHC_NIS_DMA;
679 sdhci_update_irq(s);
683 /* single block SDMA transfer */
684 static void sdhci_sdma_transfer_single_block(SDHCIState *s)
686 int n;
687 uint32_t datacnt = s->blksize & BLOCK_SIZE_MASK;
689 if (s->trnmod & SDHC_TRNS_READ) {
690 for (n = 0; n < datacnt; n++) {
691 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
693 dma_memory_write(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
694 } else {
695 dma_memory_read(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt);
696 for (n = 0; n < datacnt; n++) {
697 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
700 s->blkcnt--;
702 sdhci_end_transfer(s);
705 typedef struct ADMADescr {
706 hwaddr addr;
707 uint16_t length;
708 uint8_t attr;
709 uint8_t incr;
710 } ADMADescr;
712 static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
714 uint32_t adma1 = 0;
715 uint64_t adma2 = 0;
716 hwaddr entry_addr = (hwaddr)s->admasysaddr;
717 switch (SDHC_DMA_TYPE(s->hostctl1)) {
718 case SDHC_CTRL_ADMA2_32:
719 dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma2,
720 sizeof(adma2));
721 adma2 = le64_to_cpu(adma2);
722 /* The spec does not specify endianness of descriptor table.
723 * We currently assume that it is LE.
725 dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull;
726 dscr->length = (uint16_t)extract64(adma2, 16, 16);
727 dscr->attr = (uint8_t)extract64(adma2, 0, 7);
728 dscr->incr = 8;
729 break;
730 case SDHC_CTRL_ADMA1_32:
731 dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma1,
732 sizeof(adma1));
733 adma1 = le32_to_cpu(adma1);
734 dscr->addr = (hwaddr)(adma1 & 0xFFFFF000);
735 dscr->attr = (uint8_t)extract32(adma1, 0, 7);
736 dscr->incr = 4;
737 if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) {
738 dscr->length = (uint16_t)extract32(adma1, 12, 16);
739 } else {
740 dscr->length = 4 * KiB;
742 break;
743 case SDHC_CTRL_ADMA2_64:
744 dma_memory_read(s->dma_as, entry_addr,
745 (uint8_t *)(&dscr->attr), 1);
746 dma_memory_read(s->dma_as, entry_addr + 2,
747 (uint8_t *)(&dscr->length), 2);
748 dscr->length = le16_to_cpu(dscr->length);
749 dma_memory_read(s->dma_as, entry_addr + 4,
750 (uint8_t *)(&dscr->addr), 8);
751 dscr->addr = le64_to_cpu(dscr->addr);
752 dscr->attr &= (uint8_t) ~0xC0;
753 dscr->incr = 12;
754 break;
758 /* Advanced DMA data transfer */
760 static void sdhci_do_adma(SDHCIState *s)
762 unsigned int n, begin, length;
763 const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK;
764 ADMADescr dscr = {};
765 int i;
767 for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) {
768 s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH;
770 get_adma_description(s, &dscr);
771 trace_sdhci_adma_loop(dscr.addr, dscr.length, dscr.attr);
773 if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) {
774 /* Indicate that error occurred in ST_FDS state */
775 s->admaerr &= ~SDHC_ADMAERR_STATE_MASK;
776 s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS;
778 /* Generate ADMA error interrupt */
779 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
780 s->errintsts |= SDHC_EIS_ADMAERR;
781 s->norintsts |= SDHC_NIS_ERR;
784 sdhci_update_irq(s);
785 return;
788 length = dscr.length ? dscr.length : 64 * KiB;
790 switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) {
791 case SDHC_ADMA_ATTR_ACT_TRAN: /* data transfer */
793 if (s->trnmod & SDHC_TRNS_READ) {
794 while (length) {
795 if (s->data_count == 0) {
796 for (n = 0; n < block_size; n++) {
797 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
800 begin = s->data_count;
801 if ((length + begin) < block_size) {
802 s->data_count = length + begin;
803 length = 0;
804 } else {
805 s->data_count = block_size;
806 length -= block_size - begin;
808 dma_memory_write(s->dma_as, dscr.addr,
809 &s->fifo_buffer[begin],
810 s->data_count - begin);
811 dscr.addr += s->data_count - begin;
812 if (s->data_count == block_size) {
813 s->data_count = 0;
814 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
815 s->blkcnt--;
816 if (s->blkcnt == 0) {
817 break;
822 } else {
823 while (length) {
824 begin = s->data_count;
825 if ((length + begin) < block_size) {
826 s->data_count = length + begin;
827 length = 0;
828 } else {
829 s->data_count = block_size;
830 length -= block_size - begin;
832 dma_memory_read(s->dma_as, dscr.addr,
833 &s->fifo_buffer[begin],
834 s->data_count - begin);
835 dscr.addr += s->data_count - begin;
836 if (s->data_count == block_size) {
837 for (n = 0; n < block_size; n++) {
838 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
840 s->data_count = 0;
841 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
842 s->blkcnt--;
843 if (s->blkcnt == 0) {
844 break;
850 s->admasysaddr += dscr.incr;
851 break;
852 case SDHC_ADMA_ATTR_ACT_LINK: /* link to next descriptor table */
853 s->admasysaddr = dscr.addr;
854 trace_sdhci_adma("link", s->admasysaddr);
855 break;
856 default:
857 s->admasysaddr += dscr.incr;
858 break;
861 if (dscr.attr & SDHC_ADMA_ATTR_INT) {
862 trace_sdhci_adma("interrupt", s->admasysaddr);
863 if (s->norintstsen & SDHC_NISEN_DMA) {
864 s->norintsts |= SDHC_NIS_DMA;
867 sdhci_update_irq(s);
870 /* ADMA transfer terminates if blkcnt == 0 or by END attribute */
871 if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
872 (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) {
873 trace_sdhci_adma_transfer_completed();
874 if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) &&
875 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
876 s->blkcnt != 0)) {
877 trace_sdhci_error("SD/MMC host ADMA length mismatch");
878 s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH |
879 SDHC_ADMAERR_STATE_ST_TFR;
880 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
881 trace_sdhci_error("Set ADMA error flag");
882 s->errintsts |= SDHC_EIS_ADMAERR;
883 s->norintsts |= SDHC_NIS_ERR;
886 sdhci_update_irq(s);
888 sdhci_end_transfer(s);
889 return;
894 /* we have unfinished business - reschedule to continue ADMA */
895 timer_mod(s->transfer_timer,
896 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_TRANSFER_DELAY);
899 /* Perform data transfer according to controller configuration */
901 static void sdhci_data_transfer(void *opaque)
903 SDHCIState *s = (SDHCIState *)opaque;
905 if (s->trnmod & SDHC_TRNS_DMA) {
906 switch (SDHC_DMA_TYPE(s->hostctl1)) {
907 case SDHC_CTRL_SDMA:
908 if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) {
909 sdhci_sdma_transfer_single_block(s);
910 } else {
911 sdhci_sdma_transfer_multi_blocks(s);
914 break;
915 case SDHC_CTRL_ADMA1_32:
916 if (!(s->capareg & R_SDHC_CAPAB_ADMA1_MASK)) {
917 trace_sdhci_error("ADMA1 not supported");
918 break;
921 sdhci_do_adma(s);
922 break;
923 case SDHC_CTRL_ADMA2_32:
924 if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK)) {
925 trace_sdhci_error("ADMA2 not supported");
926 break;
929 sdhci_do_adma(s);
930 break;
931 case SDHC_CTRL_ADMA2_64:
932 if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK) ||
933 !(s->capareg & R_SDHC_CAPAB_BUS64BIT_MASK)) {
934 trace_sdhci_error("64 bit ADMA not supported");
935 break;
938 sdhci_do_adma(s);
939 break;
940 default:
941 trace_sdhci_error("Unsupported DMA type");
942 break;
944 } else {
945 if ((s->trnmod & SDHC_TRNS_READ) && sdbus_data_ready(&s->sdbus)) {
946 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
947 SDHC_DAT_LINE_ACTIVE;
948 sdhci_read_block_from_card(s);
949 } else {
950 s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE |
951 SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT;
952 sdhci_write_block_to_card(s);
957 static bool sdhci_can_issue_command(SDHCIState *s)
959 if (!SDHC_CLOCK_IS_ON(s->clkcon) ||
960 (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) &&
961 ((s->cmdreg & SDHC_CMD_DATA_PRESENT) ||
962 ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY &&
963 !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) {
964 return false;
967 return true;
970 /* The Buffer Data Port register must be accessed in sequential and
971 * continuous manner */
972 static inline bool
973 sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num)
975 if ((s->data_count & 0x3) != byte_num) {
976 trace_sdhci_error("Non-sequential access to Buffer Data Port register"
977 "is prohibited\n");
978 return false;
980 return true;
983 static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
985 SDHCIState *s = (SDHCIState *)opaque;
986 uint32_t ret = 0;
988 switch (offset & ~0x3) {
989 case SDHC_SYSAD:
990 ret = s->sdmasysad;
991 break;
992 case SDHC_BLKSIZE:
993 ret = s->blksize | (s->blkcnt << 16);
994 break;
995 case SDHC_ARGUMENT:
996 ret = s->argument;
997 break;
998 case SDHC_TRNMOD:
999 ret = s->trnmod | (s->cmdreg << 16);
1000 break;
1001 case SDHC_RSPREG0 ... SDHC_RSPREG3:
1002 ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2];
1003 break;
1004 case SDHC_BDATA:
1005 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
1006 ret = sdhci_read_dataport(s, size);
1007 trace_sdhci_access("rd", size << 3, offset, "->", ret, ret);
1008 return ret;
1010 break;
1011 case SDHC_PRNSTS:
1012 ret = s->prnsts;
1013 ret = FIELD_DP32(ret, SDHC_PRNSTS, DAT_LVL,
1014 sdbus_get_dat_lines(&s->sdbus));
1015 ret = FIELD_DP32(ret, SDHC_PRNSTS, CMD_LVL,
1016 sdbus_get_cmd_line(&s->sdbus));
1017 break;
1018 case SDHC_HOSTCTL:
1019 ret = s->hostctl1 | (s->pwrcon << 8) | (s->blkgap << 16) |
1020 (s->wakcon << 24);
1021 break;
1022 case SDHC_CLKCON:
1023 ret = s->clkcon | (s->timeoutcon << 16);
1024 break;
1025 case SDHC_NORINTSTS:
1026 ret = s->norintsts | (s->errintsts << 16);
1027 break;
1028 case SDHC_NORINTSTSEN:
1029 ret = s->norintstsen | (s->errintstsen << 16);
1030 break;
1031 case SDHC_NORINTSIGEN:
1032 ret = s->norintsigen | (s->errintsigen << 16);
1033 break;
1034 case SDHC_ACMD12ERRSTS:
1035 ret = s->acmd12errsts | (s->hostctl2 << 16);
1036 break;
1037 case SDHC_CAPAB:
1038 ret = (uint32_t)s->capareg;
1039 break;
1040 case SDHC_CAPAB + 4:
1041 ret = (uint32_t)(s->capareg >> 32);
1042 break;
1043 case SDHC_MAXCURR:
1044 ret = (uint32_t)s->maxcurr;
1045 break;
1046 case SDHC_MAXCURR + 4:
1047 ret = (uint32_t)(s->maxcurr >> 32);
1048 break;
1049 case SDHC_ADMAERR:
1050 ret = s->admaerr;
1051 break;
1052 case SDHC_ADMASYSADDR:
1053 ret = (uint32_t)s->admasysaddr;
1054 break;
1055 case SDHC_ADMASYSADDR + 4:
1056 ret = (uint32_t)(s->admasysaddr >> 32);
1057 break;
1058 case SDHC_SLOT_INT_STATUS:
1059 ret = (s->version << 16) | sdhci_slotint(s);
1060 break;
1061 default:
1062 qemu_log_mask(LOG_UNIMP, "SDHC rd_%ub @0x%02" HWADDR_PRIx " "
1063 "not implemented\n", size, offset);
1064 break;
1067 ret >>= (offset & 0x3) * 8;
1068 ret &= (1ULL << (size * 8)) - 1;
1069 trace_sdhci_access("rd", size << 3, offset, "->", ret, ret);
1070 return ret;
1073 static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value)
1075 if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) {
1076 return;
1078 s->blkgap = value & SDHC_STOP_AT_GAP_REQ;
1080 if ((value & SDHC_CONTINUE_REQ) && s->stopped_state &&
1081 (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) {
1082 if (s->stopped_state == sdhc_gap_read) {
1083 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ;
1084 sdhci_read_block_from_card(s);
1085 } else {
1086 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE;
1087 sdhci_write_block_to_card(s);
1089 s->stopped_state = sdhc_not_stopped;
1090 } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) {
1091 if (s->prnsts & SDHC_DOING_READ) {
1092 s->stopped_state = sdhc_gap_read;
1093 } else if (s->prnsts & SDHC_DOING_WRITE) {
1094 s->stopped_state = sdhc_gap_write;
1099 static inline void sdhci_reset_write(SDHCIState *s, uint8_t value)
1101 switch (value) {
1102 case SDHC_RESET_ALL:
1103 sdhci_reset(s);
1104 break;
1105 case SDHC_RESET_CMD:
1106 s->prnsts &= ~SDHC_CMD_INHIBIT;
1107 s->norintsts &= ~SDHC_NIS_CMDCMP;
1108 break;
1109 case SDHC_RESET_DATA:
1110 s->data_count = 0;
1111 s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE |
1112 SDHC_DOING_READ | SDHC_DOING_WRITE |
1113 SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE);
1114 s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ);
1115 s->stopped_state = sdhc_not_stopped;
1116 s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY |
1117 SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP);
1118 break;
1122 static void
1123 sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
1125 SDHCIState *s = (SDHCIState *)opaque;
1126 unsigned shift = 8 * (offset & 0x3);
1127 uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift);
1128 uint32_t value = val;
1129 value <<= shift;
1131 switch (offset & ~0x3) {
1132 case SDHC_SYSAD:
1133 s->sdmasysad = (s->sdmasysad & mask) | value;
1134 MASKED_WRITE(s->sdmasysad, mask, value);
1135 /* Writing to last byte of sdmasysad might trigger transfer */
1136 if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt &&
1137 s->blksize && SDHC_DMA_TYPE(s->hostctl1) == SDHC_CTRL_SDMA) {
1138 if (s->trnmod & SDHC_TRNS_MULTI) {
1139 sdhci_sdma_transfer_multi_blocks(s);
1140 } else {
1141 sdhci_sdma_transfer_single_block(s);
1144 break;
1145 case SDHC_BLKSIZE:
1146 if (!TRANSFERRING_DATA(s->prnsts)) {
1147 MASKED_WRITE(s->blksize, mask, value);
1148 MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16);
1151 /* Limit block size to the maximum buffer size */
1152 if (extract32(s->blksize, 0, 12) > s->buf_maxsz) {
1153 qemu_log_mask(LOG_GUEST_ERROR, "%s: Size 0x%x is larger than " \
1154 "the maximum buffer 0x%x", __func__, s->blksize,
1155 s->buf_maxsz);
1157 s->blksize = deposit32(s->blksize, 0, 12, s->buf_maxsz);
1160 break;
1161 case SDHC_ARGUMENT:
1162 MASKED_WRITE(s->argument, mask, value);
1163 break;
1164 case SDHC_TRNMOD:
1165 /* DMA can be enabled only if it is supported as indicated by
1166 * capabilities register */
1167 if (!(s->capareg & R_SDHC_CAPAB_SDMA_MASK)) {
1168 value &= ~SDHC_TRNS_DMA;
1170 MASKED_WRITE(s->trnmod, mask, value & SDHC_TRNMOD_MASK);
1171 MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16);
1173 /* Writing to the upper byte of CMDREG triggers SD command generation */
1174 if ((mask & 0xFF000000) || !sdhci_can_issue_command(s)) {
1175 break;
1178 sdhci_send_command(s);
1179 break;
1180 case SDHC_BDATA:
1181 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
1182 sdhci_write_dataport(s, value >> shift, size);
1184 break;
1185 case SDHC_HOSTCTL:
1186 if (!(mask & 0xFF0000)) {
1187 sdhci_blkgap_write(s, value >> 16);
1189 MASKED_WRITE(s->hostctl1, mask, value);
1190 MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8);
1191 MASKED_WRITE(s->wakcon, mask >> 24, value >> 24);
1192 if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 ||
1193 !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) {
1194 s->pwrcon &= ~SDHC_POWER_ON;
1196 break;
1197 case SDHC_CLKCON:
1198 if (!(mask & 0xFF000000)) {
1199 sdhci_reset_write(s, value >> 24);
1201 MASKED_WRITE(s->clkcon, mask, value);
1202 MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16);
1203 if (s->clkcon & SDHC_CLOCK_INT_EN) {
1204 s->clkcon |= SDHC_CLOCK_INT_STABLE;
1205 } else {
1206 s->clkcon &= ~SDHC_CLOCK_INT_STABLE;
1208 break;
1209 case SDHC_NORINTSTS:
1210 if (s->norintstsen & SDHC_NISEN_CARDINT) {
1211 value &= ~SDHC_NIS_CARDINT;
1213 s->norintsts &= mask | ~value;
1214 s->errintsts &= (mask >> 16) | ~(value >> 16);
1215 if (s->errintsts) {
1216 s->norintsts |= SDHC_NIS_ERR;
1217 } else {
1218 s->norintsts &= ~SDHC_NIS_ERR;
1220 sdhci_update_irq(s);
1221 break;
1222 case SDHC_NORINTSTSEN:
1223 MASKED_WRITE(s->norintstsen, mask, value);
1224 MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16);
1225 s->norintsts &= s->norintstsen;
1226 s->errintsts &= s->errintstsen;
1227 if (s->errintsts) {
1228 s->norintsts |= SDHC_NIS_ERR;
1229 } else {
1230 s->norintsts &= ~SDHC_NIS_ERR;
1232 /* Quirk for Raspberry Pi: pending card insert interrupt
1233 * appears when first enabled after power on */
1234 if ((s->norintstsen & SDHC_NISEN_INSERT) && s->pending_insert_state) {
1235 assert(s->pending_insert_quirk);
1236 s->norintsts |= SDHC_NIS_INSERT;
1237 s->pending_insert_state = false;
1239 sdhci_update_irq(s);
1240 break;
1241 case SDHC_NORINTSIGEN:
1242 MASKED_WRITE(s->norintsigen, mask, value);
1243 MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16);
1244 sdhci_update_irq(s);
1245 break;
1246 case SDHC_ADMAERR:
1247 MASKED_WRITE(s->admaerr, mask, value);
1248 break;
1249 case SDHC_ADMASYSADDR:
1250 s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL |
1251 (uint64_t)mask)) | (uint64_t)value;
1252 break;
1253 case SDHC_ADMASYSADDR + 4:
1254 s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL |
1255 ((uint64_t)mask << 32))) | ((uint64_t)value << 32);
1256 break;
1257 case SDHC_FEAER:
1258 s->acmd12errsts |= value;
1259 s->errintsts |= (value >> 16) & s->errintstsen;
1260 if (s->acmd12errsts) {
1261 s->errintsts |= SDHC_EIS_CMD12ERR;
1263 if (s->errintsts) {
1264 s->norintsts |= SDHC_NIS_ERR;
1266 sdhci_update_irq(s);
1267 break;
1268 case SDHC_ACMD12ERRSTS:
1269 MASKED_WRITE(s->acmd12errsts, mask, value & UINT16_MAX);
1270 if (s->uhs_mode >= UHS_I) {
1271 MASKED_WRITE(s->hostctl2, mask >> 16, value >> 16);
1273 if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, V18_ENA)) {
1274 sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_1_8V);
1275 } else {
1276 sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_3_3V);
1279 break;
1281 case SDHC_CAPAB:
1282 case SDHC_CAPAB + 4:
1283 case SDHC_MAXCURR:
1284 case SDHC_MAXCURR + 4:
1285 qemu_log_mask(LOG_GUEST_ERROR, "SDHC wr_%ub @0x%02" HWADDR_PRIx
1286 " <- 0x%08x read-only\n", size, offset, value >> shift);
1287 break;
1289 default:
1290 qemu_log_mask(LOG_UNIMP, "SDHC wr_%ub @0x%02" HWADDR_PRIx " <- 0x%08x "
1291 "not implemented\n", size, offset, value >> shift);
1292 break;
1294 trace_sdhci_access("wr", size << 3, offset, "<-",
1295 value >> shift, value >> shift);
1298 static const MemoryRegionOps sdhci_mmio_ops = {
1299 .read = sdhci_read,
1300 .write = sdhci_write,
1301 .valid = {
1302 .min_access_size = 1,
1303 .max_access_size = 4,
1304 .unaligned = false
1306 .endianness = DEVICE_LITTLE_ENDIAN,
1309 static void sdhci_init_readonly_registers(SDHCIState *s, Error **errp)
1311 Error *local_err = NULL;
1313 switch (s->sd_spec_version) {
1314 case 2 ... 3:
1315 break;
1316 default:
1317 error_setg(errp, "Only Spec v2/v3 are supported");
1318 return;
1320 s->version = (SDHC_HCVER_VENDOR << 8) | (s->sd_spec_version - 1);
1322 sdhci_check_capareg(s, &local_err);
1323 if (local_err) {
1324 error_propagate(errp, local_err);
1325 return;
1329 /* --- qdev common --- */
1331 #define DEFINE_SDHCI_COMMON_PROPERTIES(_state) \
1332 DEFINE_PROP_UINT8("sd-spec-version", _state, sd_spec_version, 2), \
1333 DEFINE_PROP_UINT8("uhs", _state, uhs_mode, UHS_NOT_SUPPORTED), \
1335 /* Capabilities registers provide information on supported
1336 * features of this specific host controller implementation */ \
1337 DEFINE_PROP_UINT64("capareg", _state, capareg, SDHC_CAPAB_REG_DEFAULT), \
1338 DEFINE_PROP_UINT64("maxcurr", _state, maxcurr, 0)
1340 static void sdhci_initfn(SDHCIState *s)
1342 qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
1343 TYPE_SDHCI_BUS, DEVICE(s), "sd-bus");
1345 s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s);
1346 s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s);
1348 s->io_ops = &sdhci_mmio_ops;
1351 static void sdhci_uninitfn(SDHCIState *s)
1353 timer_del(s->insert_timer);
1354 timer_free(s->insert_timer);
1355 timer_del(s->transfer_timer);
1356 timer_free(s->transfer_timer);
1358 g_free(s->fifo_buffer);
1359 s->fifo_buffer = NULL;
1362 static void sdhci_common_realize(SDHCIState *s, Error **errp)
1364 Error *local_err = NULL;
1366 sdhci_init_readonly_registers(s, &local_err);
1367 if (local_err) {
1368 error_propagate(errp, local_err);
1369 return;
1371 s->buf_maxsz = sdhci_get_fifolen(s);
1372 s->fifo_buffer = g_malloc0(s->buf_maxsz);
1374 memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
1375 SDHC_REGISTERS_MAP_SIZE);
1378 static void sdhci_common_unrealize(SDHCIState *s, Error **errp)
1380 /* This function is expected to be called only once for each class:
1381 * - SysBus: via DeviceClass->unrealize(),
1382 * - PCI: via PCIDeviceClass->exit().
1383 * However to avoid double-free and/or use-after-free we still nullify
1384 * this variable (better safe than sorry!). */
1385 g_free(s->fifo_buffer);
1386 s->fifo_buffer = NULL;
1389 static bool sdhci_pending_insert_vmstate_needed(void *opaque)
1391 SDHCIState *s = opaque;
1393 return s->pending_insert_state;
1396 static const VMStateDescription sdhci_pending_insert_vmstate = {
1397 .name = "sdhci/pending-insert",
1398 .version_id = 1,
1399 .minimum_version_id = 1,
1400 .needed = sdhci_pending_insert_vmstate_needed,
1401 .fields = (VMStateField[]) {
1402 VMSTATE_BOOL(pending_insert_state, SDHCIState),
1403 VMSTATE_END_OF_LIST()
1407 const VMStateDescription sdhci_vmstate = {
1408 .name = "sdhci",
1409 .version_id = 1,
1410 .minimum_version_id = 1,
1411 .fields = (VMStateField[]) {
1412 VMSTATE_UINT32(sdmasysad, SDHCIState),
1413 VMSTATE_UINT16(blksize, SDHCIState),
1414 VMSTATE_UINT16(blkcnt, SDHCIState),
1415 VMSTATE_UINT32(argument, SDHCIState),
1416 VMSTATE_UINT16(trnmod, SDHCIState),
1417 VMSTATE_UINT16(cmdreg, SDHCIState),
1418 VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4),
1419 VMSTATE_UINT32(prnsts, SDHCIState),
1420 VMSTATE_UINT8(hostctl1, SDHCIState),
1421 VMSTATE_UINT8(pwrcon, SDHCIState),
1422 VMSTATE_UINT8(blkgap, SDHCIState),
1423 VMSTATE_UINT8(wakcon, SDHCIState),
1424 VMSTATE_UINT16(clkcon, SDHCIState),
1425 VMSTATE_UINT8(timeoutcon, SDHCIState),
1426 VMSTATE_UINT8(admaerr, SDHCIState),
1427 VMSTATE_UINT16(norintsts, SDHCIState),
1428 VMSTATE_UINT16(errintsts, SDHCIState),
1429 VMSTATE_UINT16(norintstsen, SDHCIState),
1430 VMSTATE_UINT16(errintstsen, SDHCIState),
1431 VMSTATE_UINT16(norintsigen, SDHCIState),
1432 VMSTATE_UINT16(errintsigen, SDHCIState),
1433 VMSTATE_UINT16(acmd12errsts, SDHCIState),
1434 VMSTATE_UINT16(data_count, SDHCIState),
1435 VMSTATE_UINT64(admasysaddr, SDHCIState),
1436 VMSTATE_UINT8(stopped_state, SDHCIState),
1437 VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, buf_maxsz),
1438 VMSTATE_TIMER_PTR(insert_timer, SDHCIState),
1439 VMSTATE_TIMER_PTR(transfer_timer, SDHCIState),
1440 VMSTATE_END_OF_LIST()
1442 .subsections = (const VMStateDescription*[]) {
1443 &sdhci_pending_insert_vmstate,
1444 NULL
1448 static void sdhci_common_class_init(ObjectClass *klass, void *data)
1450 DeviceClass *dc = DEVICE_CLASS(klass);
1452 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
1453 dc->vmsd = &sdhci_vmstate;
1454 dc->reset = sdhci_poweron_reset;
1457 /* --- qdev PCI --- */
1459 static Property sdhci_pci_properties[] = {
1460 DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState),
1461 DEFINE_PROP_END_OF_LIST(),
1464 static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
1466 SDHCIState *s = PCI_SDHCI(dev);
1467 Error *local_err = NULL;
1469 sdhci_initfn(s);
1470 sdhci_common_realize(s, &local_err);
1471 if (local_err) {
1472 error_propagate(errp, local_err);
1473 return;
1476 dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
1477 dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
1478 s->irq = pci_allocate_irq(dev);
1479 s->dma_as = pci_get_address_space(dev);
1480 pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->iomem);
1483 static void sdhci_pci_exit(PCIDevice *dev)
1485 SDHCIState *s = PCI_SDHCI(dev);
1487 sdhci_common_unrealize(s, &error_abort);
1488 sdhci_uninitfn(s);
1491 static void sdhci_pci_class_init(ObjectClass *klass, void *data)
1493 DeviceClass *dc = DEVICE_CLASS(klass);
1494 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1496 k->realize = sdhci_pci_realize;
1497 k->exit = sdhci_pci_exit;
1498 k->vendor_id = PCI_VENDOR_ID_REDHAT;
1499 k->device_id = PCI_DEVICE_ID_REDHAT_SDHCI;
1500 k->class_id = PCI_CLASS_SYSTEM_SDHCI;
1501 dc->props = sdhci_pci_properties;
1503 sdhci_common_class_init(klass, data);
1506 static const TypeInfo sdhci_pci_info = {
1507 .name = TYPE_PCI_SDHCI,
1508 .parent = TYPE_PCI_DEVICE,
1509 .instance_size = sizeof(SDHCIState),
1510 .class_init = sdhci_pci_class_init,
1511 .interfaces = (InterfaceInfo[]) {
1512 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
1513 { },
1517 /* --- qdev SysBus --- */
1519 static Property sdhci_sysbus_properties[] = {
1520 DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState),
1521 DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk,
1522 false),
1523 DEFINE_PROP_LINK("dma", SDHCIState,
1524 dma_mr, TYPE_MEMORY_REGION, MemoryRegion *),
1525 DEFINE_PROP_END_OF_LIST(),
1528 static void sdhci_sysbus_init(Object *obj)
1530 SDHCIState *s = SYSBUS_SDHCI(obj);
1532 sdhci_initfn(s);
1535 static void sdhci_sysbus_finalize(Object *obj)
1537 SDHCIState *s = SYSBUS_SDHCI(obj);
1539 if (s->dma_mr) {
1540 object_unparent(OBJECT(s->dma_mr));
1543 sdhci_uninitfn(s);
1546 static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
1548 SDHCIState *s = SYSBUS_SDHCI(dev);
1549 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1550 Error *local_err = NULL;
1552 sdhci_common_realize(s, &local_err);
1553 if (local_err) {
1554 error_propagate(errp, local_err);
1555 return;
1558 if (s->dma_mr) {
1559 s->dma_as = &s->sysbus_dma_as;
1560 address_space_init(s->dma_as, s->dma_mr, "sdhci-dma");
1561 } else {
1562 /* use system_memory() if property "dma" not set */
1563 s->dma_as = &address_space_memory;
1566 sysbus_init_irq(sbd, &s->irq);
1568 memory_region_init_io(&s->iomem, OBJECT(s), s->io_ops, s, "sdhci",
1569 SDHC_REGISTERS_MAP_SIZE);
1571 sysbus_init_mmio(sbd, &s->iomem);
1574 static void sdhci_sysbus_unrealize(DeviceState *dev, Error **errp)
1576 SDHCIState *s = SYSBUS_SDHCI(dev);
1578 sdhci_common_unrealize(s, &error_abort);
1580 if (s->dma_mr) {
1581 address_space_destroy(s->dma_as);
1585 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
1587 DeviceClass *dc = DEVICE_CLASS(klass);
1589 dc->props = sdhci_sysbus_properties;
1590 dc->realize = sdhci_sysbus_realize;
1591 dc->unrealize = sdhci_sysbus_unrealize;
1593 sdhci_common_class_init(klass, data);
1596 static const TypeInfo sdhci_sysbus_info = {
1597 .name = TYPE_SYSBUS_SDHCI,
1598 .parent = TYPE_SYS_BUS_DEVICE,
1599 .instance_size = sizeof(SDHCIState),
1600 .instance_init = sdhci_sysbus_init,
1601 .instance_finalize = sdhci_sysbus_finalize,
1602 .class_init = sdhci_sysbus_class_init,
1605 /* --- qdev bus master --- */
1607 static void sdhci_bus_class_init(ObjectClass *klass, void *data)
1609 SDBusClass *sbc = SD_BUS_CLASS(klass);
1611 sbc->set_inserted = sdhci_set_inserted;
1612 sbc->set_readonly = sdhci_set_readonly;
1615 static const TypeInfo sdhci_bus_info = {
1616 .name = TYPE_SDHCI_BUS,
1617 .parent = TYPE_SD_BUS,
1618 .instance_size = sizeof(SDBus),
1619 .class_init = sdhci_bus_class_init,
1622 static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size)
1624 SDHCIState *s = SYSBUS_SDHCI(opaque);
1625 uint32_t ret;
1626 uint16_t hostctl1;
1628 switch (offset) {
1629 default:
1630 return sdhci_read(opaque, offset, size);
1632 case SDHC_HOSTCTL:
1634 * For a detailed explanation on the following bit
1635 * manipulation code see comments in a similar part of
1636 * usdhc_write()
1638 hostctl1 = SDHC_DMA_TYPE(s->hostctl1) << (8 - 3);
1640 if (s->hostctl1 & SDHC_CTRL_8BITBUS) {
1641 hostctl1 |= ESDHC_CTRL_8BITBUS;
1644 if (s->hostctl1 & SDHC_CTRL_4BITBUS) {
1645 hostctl1 |= ESDHC_CTRL_4BITBUS;
1648 ret = hostctl1;
1649 ret |= (uint32_t)s->blkgap << 16;
1650 ret |= (uint32_t)s->wakcon << 24;
1652 break;
1654 case SDHC_PRNSTS:
1655 /* Add SDSTB (SD Clock Stable) bit to PRNSTS */
1656 ret = sdhci_read(opaque, offset, size) & ~ESDHC_PRNSTS_SDSTB;
1657 if (s->clkcon & SDHC_CLOCK_INT_STABLE) {
1658 ret |= ESDHC_PRNSTS_SDSTB;
1660 break;
1662 case ESDHC_DLL_CTRL:
1663 case ESDHC_TUNE_CTRL_STATUS:
1664 case ESDHC_UNDOCUMENTED_REG27:
1665 case ESDHC_TUNING_CTRL:
1666 case ESDHC_VENDOR_SPEC:
1667 case ESDHC_MIX_CTRL:
1668 case ESDHC_WTMK_LVL:
1669 ret = 0;
1670 break;
1673 return ret;
1676 static void
1677 usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
1679 SDHCIState *s = SYSBUS_SDHCI(opaque);
1680 uint8_t hostctl1;
1681 uint32_t value = (uint32_t)val;
1683 switch (offset) {
1684 case ESDHC_DLL_CTRL:
1685 case ESDHC_TUNE_CTRL_STATUS:
1686 case ESDHC_UNDOCUMENTED_REG27:
1687 case ESDHC_TUNING_CTRL:
1688 case ESDHC_WTMK_LVL:
1689 case ESDHC_VENDOR_SPEC:
1690 break;
1692 case SDHC_HOSTCTL:
1694 * Here's What ESDHCI has at offset 0x28 (SDHC_HOSTCTL)
1696 * 7 6 5 4 3 2 1 0
1697 * |-----------+--------+--------+-----------+----------+---------|
1698 * | Card | Card | Endian | DATA3 | Data | Led |
1699 * | Detect | Detect | Mode | as Card | Transfer | Control |
1700 * | Signal | Test | | Detection | Width | |
1701 * | Selection | Level | | Pin | | |
1702 * |-----------+--------+--------+-----------+----------+---------|
1704 * and 0x29
1706 * 15 10 9 8
1707 * |----------+------|
1708 * | Reserved | DMA |
1709 * | | Sel. |
1710 * | | |
1711 * |----------+------|
1713 * and here's what SDCHI spec expects those offsets to be:
1715 * 0x28 (Host Control Register)
1717 * 7 6 5 4 3 2 1 0
1718 * |--------+--------+----------+------+--------+----------+---------|
1719 * | Card | Card | Extended | DMA | High | Data | LED |
1720 * | Detect | Detect | Data | Sel. | Speed | Transfer | Control |
1721 * | Signal | Test | Transfer | | Enable | Width | |
1722 * | Sel. | Level | Width | | | | |
1723 * |--------+--------+----------+------+--------+----------+---------|
1725 * and 0x29 (Power Control Register)
1727 * |----------------------------------|
1728 * | Power Control Register |
1729 * | |
1730 * | Description omitted, |
1731 * | since it has no analog in ESDHCI |
1732 * | |
1733 * |----------------------------------|
1735 * Since offsets 0x2A and 0x2B should be compatible between
1736 * both IP specs we only need to reconcile least 16-bit of the
1737 * word we've been given.
1741 * First, save bits 7 6 and 0 since they are identical
1743 hostctl1 = value & (SDHC_CTRL_LED |
1744 SDHC_CTRL_CDTEST_INS |
1745 SDHC_CTRL_CDTEST_EN);
1747 * Second, split "Data Transfer Width" from bits 2 and 1 in to
1748 * bits 5 and 1
1750 if (value & ESDHC_CTRL_8BITBUS) {
1751 hostctl1 |= SDHC_CTRL_8BITBUS;
1754 if (value & ESDHC_CTRL_4BITBUS) {
1755 hostctl1 |= ESDHC_CTRL_4BITBUS;
1759 * Third, move DMA select from bits 9 and 8 to bits 4 and 3
1761 hostctl1 |= SDHC_DMA_TYPE(value >> (8 - 3));
1764 * Now place the corrected value into low 16-bit of the value
1765 * we are going to give standard SDHCI write function
1767 * NOTE: This transformation should be the inverse of what can
1768 * be found in drivers/mmc/host/sdhci-esdhc-imx.c in Linux
1769 * kernel
1771 value &= ~UINT16_MAX;
1772 value |= hostctl1;
1773 value |= (uint16_t)s->pwrcon << 8;
1775 sdhci_write(opaque, offset, value, size);
1776 break;
1778 case ESDHC_MIX_CTRL:
1780 * So, when SD/MMC stack in Linux tries to write to "Transfer
1781 * Mode Register", ESDHC i.MX quirk code will translate it
1782 * into a write to ESDHC_MIX_CTRL, so we do the opposite in
1783 * order to get where we started
1785 * Note that Auto CMD23 Enable bit is located in a wrong place
1786 * on i.MX, but since it is not used by QEMU we do not care.
1788 * We don't want to call sdhci_write(.., SDHC_TRNMOD, ...)
1789 * here becuase it will result in a call to
1790 * sdhci_send_command(s) which we don't want.
1793 s->trnmod = value & UINT16_MAX;
1794 break;
1795 case SDHC_TRNMOD:
1797 * Similar to above, but this time a write to "Command
1798 * Register" will be translated into a 4-byte write to
1799 * "Transfer Mode register" where lower 16-bit of value would
1800 * be set to zero. So what we do is fill those bits with
1801 * cached value from s->trnmod and let the SDHCI
1802 * infrastructure handle the rest
1804 sdhci_write(opaque, offset, val | s->trnmod, size);
1805 break;
1806 case SDHC_BLKSIZE:
1808 * ESDHCI does not implement "Host SDMA Buffer Boundary", and
1809 * Linux driver will try to zero this field out which will
1810 * break the rest of SDHCI emulation.
1812 * Linux defaults to maximum possible setting (512K boundary)
1813 * and it seems to be the only option that i.MX IP implements,
1814 * so we artificially set it to that value.
1816 val |= 0x7 << 12;
1817 /* FALLTHROUGH */
1818 default:
1819 sdhci_write(opaque, offset, val, size);
1820 break;
1825 static const MemoryRegionOps usdhc_mmio_ops = {
1826 .read = usdhc_read,
1827 .write = usdhc_write,
1828 .valid = {
1829 .min_access_size = 1,
1830 .max_access_size = 4,
1831 .unaligned = false
1833 .endianness = DEVICE_LITTLE_ENDIAN,
1836 static void imx_usdhc_init(Object *obj)
1838 SDHCIState *s = SYSBUS_SDHCI(obj);
1840 s->io_ops = &usdhc_mmio_ops;
1841 s->quirks = SDHCI_QUIRK_NO_BUSY_IRQ;
1844 static const TypeInfo imx_usdhc_info = {
1845 .name = TYPE_IMX_USDHC,
1846 .parent = TYPE_SYSBUS_SDHCI,
1847 .instance_init = imx_usdhc_init,
1850 static void sdhci_register_types(void)
1852 type_register_static(&sdhci_pci_info);
1853 type_register_static(&sdhci_sysbus_info);
1854 type_register_static(&sdhci_bus_info);
1855 type_register_static(&imx_usdhc_info);
1858 type_init(sdhci_register_types)