error: Avoid error_propagate() after migrate_add_blocker()
[qemu/ar7.git] / hw / isa / vt82c686.c
blob18160ca445db4dffba51dec8ba2bde5dedb15360
1 /*
2 * VT82C686B south bridge support
4 * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7 * This code is licensed under the GNU GPL v2.
9 * Contributions after 2012-01-13 are licensed under the terms of the
10 * GNU GPL, version 2 or (at your option) any later version.
13 #include "qemu/osdep.h"
14 #include "hw/isa/vt82c686.h"
15 #include "hw/i2c/i2c.h"
16 #include "hw/pci/pci.h"
17 #include "hw/qdev-properties.h"
18 #include "hw/isa/isa.h"
19 #include "hw/isa/superio.h"
20 #include "hw/sysbus.h"
21 #include "migration/vmstate.h"
22 #include "hw/mips/mips.h"
23 #include "hw/isa/apm.h"
24 #include "hw/acpi/acpi.h"
25 #include "hw/i2c/pm_smbus.h"
26 #include "qapi/error.h"
27 #include "qemu/module.h"
28 #include "qemu/timer.h"
29 #include "exec/address-spaces.h"
31 /* #define DEBUG_VT82C686B */
33 #ifdef DEBUG_VT82C686B
34 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __func__, ##__VA_ARGS__)
35 #else
36 #define DPRINTF(fmt, ...)
37 #endif
39 typedef struct SuperIOConfig {
40 uint8_t config[0x100];
41 uint8_t index;
42 uint8_t data;
43 } SuperIOConfig;
45 typedef struct VT82C686BState {
46 PCIDevice dev;
47 MemoryRegion superio;
48 SuperIOConfig superio_conf;
49 } VT82C686BState;
51 #define TYPE_VT82C686B_DEVICE "VT82C686B"
52 #define VT82C686B_DEVICE(obj) \
53 OBJECT_CHECK(VT82C686BState, (obj), TYPE_VT82C686B_DEVICE)
55 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
56 unsigned size)
58 SuperIOConfig *superio_conf = opaque;
60 DPRINTF("superio_ioport_writeb address 0x%x val 0x%x\n", addr, data);
61 if (addr == 0x3f0) {
62 superio_conf->index = data & 0xff;
63 } else {
64 bool can_write = true;
65 /* 0x3f1 */
66 switch (superio_conf->index) {
67 case 0x00 ... 0xdf:
68 case 0xe4:
69 case 0xe5:
70 case 0xe9 ... 0xed:
71 case 0xf3:
72 case 0xf5:
73 case 0xf7:
74 case 0xf9 ... 0xfb:
75 case 0xfd ... 0xff:
76 can_write = false;
77 break;
78 case 0xe7:
79 if ((data & 0xff) != 0xfe) {
80 DPRINTF("change uart 1 base. unsupported yet\n");
81 can_write = false;
83 break;
84 case 0xe8:
85 if ((data & 0xff) != 0xbe) {
86 DPRINTF("change uart 2 base. unsupported yet\n");
87 can_write = false;
89 break;
90 default:
91 break;
94 if (can_write) {
95 superio_conf->config[superio_conf->index] = data & 0xff;
100 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
102 SuperIOConfig *superio_conf = opaque;
104 DPRINTF("superio_ioport_readb address 0x%x\n", addr);
105 return superio_conf->config[superio_conf->index];
108 static const MemoryRegionOps superio_ops = {
109 .read = superio_ioport_readb,
110 .write = superio_ioport_writeb,
111 .endianness = DEVICE_NATIVE_ENDIAN,
112 .impl = {
113 .min_access_size = 1,
114 .max_access_size = 1,
118 static void vt82c686b_isa_reset(DeviceState *dev)
120 VT82C686BState *vt82c = VT82C686B_DEVICE(dev);
121 uint8_t *pci_conf = vt82c->dev.config;
123 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
124 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
125 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
126 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
128 pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
129 pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
130 pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
131 pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
132 pci_conf[0x59] = 0x04;
133 pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
134 pci_conf[0x5f] = 0x04;
135 pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
137 vt82c->superio_conf.config[0xe0] = 0x3c;
138 vt82c->superio_conf.config[0xe2] = 0x03;
139 vt82c->superio_conf.config[0xe3] = 0xfc;
140 vt82c->superio_conf.config[0xe6] = 0xde;
141 vt82c->superio_conf.config[0xe7] = 0xfe;
142 vt82c->superio_conf.config[0xe8] = 0xbe;
145 /* write config pci function0 registers. PCI-ISA bridge */
146 static void vt82c686b_write_config(PCIDevice *d, uint32_t address,
147 uint32_t val, int len)
149 VT82C686BState *vt686 = VT82C686B_DEVICE(d);
151 DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x\n",
152 address, val, len);
154 pci_default_write_config(d, address, val, len);
155 if (address == 0x85) { /* enable or disable super IO configure */
156 memory_region_set_enabled(&vt686->superio, val & 0x2);
160 #define ACPI_DBG_IO_ADDR 0xb044
162 typedef struct VT686PMState {
163 PCIDevice dev;
164 MemoryRegion io;
165 ACPIREGS ar;
166 APMState apm;
167 PMSMBus smb;
168 uint32_t smb_io_base;
169 } VT686PMState;
171 typedef struct VT686AC97State {
172 PCIDevice dev;
173 } VT686AC97State;
175 typedef struct VT686MC97State {
176 PCIDevice dev;
177 } VT686MC97State;
179 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM"
180 #define VT82C686B_PM_DEVICE(obj) \
181 OBJECT_CHECK(VT686PMState, (obj), TYPE_VT82C686B_PM_DEVICE)
183 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97"
184 #define VT82C686B_MC97_DEVICE(obj) \
185 OBJECT_CHECK(VT686MC97State, (obj), TYPE_VT82C686B_MC97_DEVICE)
187 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97"
188 #define VT82C686B_AC97_DEVICE(obj) \
189 OBJECT_CHECK(VT686AC97State, (obj), TYPE_VT82C686B_AC97_DEVICE)
191 static void pm_update_sci(VT686PMState *s)
193 int sci_level, pmsts;
195 pmsts = acpi_pm1_evt_get_sts(&s->ar);
196 sci_level = (((pmsts & s->ar.pm1.evt.en) &
197 (ACPI_BITMASK_RT_CLOCK_ENABLE |
198 ACPI_BITMASK_POWER_BUTTON_ENABLE |
199 ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
200 ACPI_BITMASK_TIMER_ENABLE)) != 0);
201 pci_set_irq(&s->dev, sci_level);
202 /* schedule a timer interruption if needed */
203 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
204 !(pmsts & ACPI_BITMASK_TIMER_STATUS));
207 static void pm_tmr_timer(ACPIREGS *ar)
209 VT686PMState *s = container_of(ar, VT686PMState, ar);
210 pm_update_sci(s);
213 static void pm_io_space_update(VT686PMState *s)
215 uint32_t pm_io_base;
217 pm_io_base = pci_get_long(s->dev.config + 0x40);
218 pm_io_base &= 0xffc0;
220 memory_region_transaction_begin();
221 memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
222 memory_region_set_address(&s->io, pm_io_base);
223 memory_region_transaction_commit();
226 static void pm_write_config(PCIDevice *d,
227 uint32_t address, uint32_t val, int len)
229 DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x\n",
230 address, val, len);
231 pci_default_write_config(d, address, val, len);
234 static int vmstate_acpi_post_load(void *opaque, int version_id)
236 VT686PMState *s = opaque;
238 pm_io_space_update(s);
239 return 0;
242 static const VMStateDescription vmstate_acpi = {
243 .name = "vt82c686b_pm",
244 .version_id = 1,
245 .minimum_version_id = 1,
246 .post_load = vmstate_acpi_post_load,
247 .fields = (VMStateField[]) {
248 VMSTATE_PCI_DEVICE(dev, VT686PMState),
249 VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
250 VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
251 VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
252 VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
253 VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState),
254 VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
255 VMSTATE_END_OF_LIST()
260 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
261 * just register a PCI device now, functionalities will be implemented later.
264 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp)
266 VT686AC97State *s = VT82C686B_AC97_DEVICE(dev);
267 uint8_t *pci_conf = s->dev.config;
269 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
270 PCI_COMMAND_PARITY);
271 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
272 PCI_STATUS_DEVSEL_MEDIUM);
273 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
276 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
278 PCIDevice *dev;
280 dev = pci_new(devfn, TYPE_VT82C686B_AC97_DEVICE);
281 pci_realize_and_unref(dev, bus, &error_fatal);
284 static void via_ac97_class_init(ObjectClass *klass, void *data)
286 DeviceClass *dc = DEVICE_CLASS(klass);
287 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
289 k->realize = vt82c686b_ac97_realize;
290 k->vendor_id = PCI_VENDOR_ID_VIA;
291 k->device_id = PCI_DEVICE_ID_VIA_AC97;
292 k->revision = 0x50;
293 k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
294 set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
295 dc->desc = "AC97";
298 static const TypeInfo via_ac97_info = {
299 .name = TYPE_VT82C686B_AC97_DEVICE,
300 .parent = TYPE_PCI_DEVICE,
301 .instance_size = sizeof(VT686AC97State),
302 .class_init = via_ac97_class_init,
303 .interfaces = (InterfaceInfo[]) {
304 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
305 { },
309 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp)
311 VT686MC97State *s = VT82C686B_MC97_DEVICE(dev);
312 uint8_t *pci_conf = s->dev.config;
314 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
315 PCI_COMMAND_VGA_PALETTE);
316 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
317 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
320 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
322 PCIDevice *dev;
324 dev = pci_new(devfn, TYPE_VT82C686B_MC97_DEVICE);
325 pci_realize_and_unref(dev, bus, &error_fatal);
328 static void via_mc97_class_init(ObjectClass *klass, void *data)
330 DeviceClass *dc = DEVICE_CLASS(klass);
331 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
333 k->realize = vt82c686b_mc97_realize;
334 k->vendor_id = PCI_VENDOR_ID_VIA;
335 k->device_id = PCI_DEVICE_ID_VIA_MC97;
336 k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
337 k->revision = 0x30;
338 set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
339 dc->desc = "MC97";
342 static const TypeInfo via_mc97_info = {
343 .name = TYPE_VT82C686B_MC97_DEVICE,
344 .parent = TYPE_PCI_DEVICE,
345 .instance_size = sizeof(VT686MC97State),
346 .class_init = via_mc97_class_init,
347 .interfaces = (InterfaceInfo[]) {
348 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
349 { },
353 /* vt82c686 pm init */
354 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
356 VT686PMState *s = VT82C686B_PM_DEVICE(dev);
357 uint8_t *pci_conf;
359 pci_conf = s->dev.config;
360 pci_set_word(pci_conf + PCI_COMMAND, 0);
361 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
362 PCI_STATUS_DEVSEL_MEDIUM);
364 /* 0x48-0x4B is Power Management I/O Base */
365 pci_set_long(pci_conf + 0x48, 0x00000001);
367 /* SMB ports:0xeee0~0xeeef */
368 s->smb_io_base = ((s->smb_io_base & 0xfff0) + 0x0);
369 pci_conf[0x90] = s->smb_io_base | 1;
370 pci_conf[0x91] = s->smb_io_base >> 8;
371 pci_conf[0xd2] = 0x90;
372 pm_smbus_init(DEVICE(s), &s->smb, false);
373 memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
375 apm_init(dev, &s->apm, NULL, s);
377 memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
378 memory_region_set_enabled(&s->io, false);
379 memory_region_add_subregion(get_system_io(), 0, &s->io);
381 acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
382 acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
383 acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2);
386 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
387 qemu_irq sci_irq)
389 PCIDevice *dev;
390 VT686PMState *s;
392 dev = pci_new(devfn, TYPE_VT82C686B_PM_DEVICE);
393 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
395 s = VT82C686B_PM_DEVICE(dev);
397 pci_realize_and_unref(dev, bus, &error_fatal);
399 return s->smb.smbus;
402 static Property via_pm_properties[] = {
403 DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
404 DEFINE_PROP_END_OF_LIST(),
407 static void via_pm_class_init(ObjectClass *klass, void *data)
409 DeviceClass *dc = DEVICE_CLASS(klass);
410 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
412 k->realize = vt82c686b_pm_realize;
413 k->config_write = pm_write_config;
414 k->vendor_id = PCI_VENDOR_ID_VIA;
415 k->device_id = PCI_DEVICE_ID_VIA_ACPI;
416 k->class_id = PCI_CLASS_BRIDGE_OTHER;
417 k->revision = 0x40;
418 dc->desc = "PM";
419 dc->vmsd = &vmstate_acpi;
420 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
421 device_class_set_props(dc, via_pm_properties);
424 static const TypeInfo via_pm_info = {
425 .name = TYPE_VT82C686B_PM_DEVICE,
426 .parent = TYPE_PCI_DEVICE,
427 .instance_size = sizeof(VT686PMState),
428 .class_init = via_pm_class_init,
429 .interfaces = (InterfaceInfo[]) {
430 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
431 { },
435 static const VMStateDescription vmstate_via = {
436 .name = "vt82c686b",
437 .version_id = 1,
438 .minimum_version_id = 1,
439 .fields = (VMStateField[]) {
440 VMSTATE_PCI_DEVICE(dev, VT82C686BState),
441 VMSTATE_END_OF_LIST()
445 /* init the PCI-to-ISA bridge */
446 static void vt82c686b_realize(PCIDevice *d, Error **errp)
448 VT82C686BState *vt82c = VT82C686B_DEVICE(d);
449 uint8_t *pci_conf;
450 ISABus *isa_bus;
451 uint8_t *wmask;
452 int i;
454 isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
455 pci_address_space_io(d), errp);
456 if (!isa_bus) {
457 return;
460 pci_conf = d->config;
461 pci_config_set_prog_interface(pci_conf, 0x0);
463 wmask = d->wmask;
464 for (i = 0x00; i < 0xff; i++) {
465 if (i <= 0x03 || (i >= 0x08 && i <= 0x3f)) {
466 wmask[i] = 0x00;
470 memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
471 &vt82c->superio_conf, "superio", 2);
472 memory_region_set_enabled(&vt82c->superio, false);
474 * The floppy also uses 0x3f0 and 0x3f1.
475 * But we do not emulate a floppy, so just set it here.
477 memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
478 &vt82c->superio);
481 ISABus *vt82c686b_isa_init(PCIBus *bus, int devfn)
483 PCIDevice *d;
485 d = pci_create_simple_multifunction(bus, devfn, true,
486 TYPE_VT82C686B_DEVICE);
488 return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
491 static void via_class_init(ObjectClass *klass, void *data)
493 DeviceClass *dc = DEVICE_CLASS(klass);
494 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
496 k->realize = vt82c686b_realize;
497 k->config_write = vt82c686b_write_config;
498 k->vendor_id = PCI_VENDOR_ID_VIA;
499 k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
500 k->class_id = PCI_CLASS_BRIDGE_ISA;
501 k->revision = 0x40;
502 dc->reset = vt82c686b_isa_reset;
503 dc->desc = "ISA bridge";
504 dc->vmsd = &vmstate_via;
506 * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
507 * e.g. by mips_fuloong2e_init()
509 dc->user_creatable = false;
512 static const TypeInfo via_info = {
513 .name = TYPE_VT82C686B_DEVICE,
514 .parent = TYPE_PCI_DEVICE,
515 .instance_size = sizeof(VT82C686BState),
516 .class_init = via_class_init,
517 .interfaces = (InterfaceInfo[]) {
518 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
519 { },
523 static void vt82c686b_superio_class_init(ObjectClass *klass, void *data)
525 ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
527 sc->serial.count = 2;
528 sc->parallel.count = 1;
529 sc->ide.count = 0;
530 sc->floppy.count = 1;
533 static const TypeInfo via_superio_info = {
534 .name = TYPE_VT82C686B_SUPERIO,
535 .parent = TYPE_ISA_SUPERIO,
536 .instance_size = sizeof(ISASuperIODevice),
537 .class_size = sizeof(ISASuperIOClass),
538 .class_init = vt82c686b_superio_class_init,
541 static void vt82c686b_register_types(void)
543 type_register_static(&via_ac97_info);
544 type_register_static(&via_mc97_info);
545 type_register_static(&via_pm_info);
546 type_register_static(&via_superio_info);
547 type_register_static(&via_info);
550 type_init(vt82c686b_register_types)