hw/pl031.c

   1 /*
   2  * ARM AMBA PrimeCell PL031 RTC
   3  *
   4  * Copyright (c) 2007 CodeSourcery
   5  *
   6  * This file is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2 as
   8  * published by the Free Software Foundation.
   9  *
  10  * Contributions after 2012-01-13 are licensed under the terms of the
  11  * GNU GPL, version 2 or (at your option) any later version.
  12  */
  13
  14 #include "sysbus.h"
  15 #include "qemu-timer.h"
  16
  17 //#define DEBUG_PL031
  18
  19 #ifdef DEBUG_PL031
  20 #define DPRINTF(fmt, ...) \
  21 do { printf("pl031: " fmt , ## __VA_ARGS__); } while (0)
  22 #else
  23 #define DPRINTF(fmt, ...) do {} while(0)
  24 #endif
  25
  26 #define RTC_DR      0x00    /* Data read register */
  27 #define RTC_MR      0x04    /* Match register */
  28 #define RTC_LR      0x08    /* Data load register */
  29 #define RTC_CR      0x0c    /* Control register */
  30 #define RTC_IMSC    0x10    /* Interrupt mask and set register */
  31 #define RTC_RIS     0x14    /* Raw interrupt status register */
  32 #define RTC_MIS     0x18    /* Masked interrupt status register */
  33 #define RTC_ICR     0x1c    /* Interrupt clear register */
  34
  35 typedef struct {
  36     SysBusDevice busdev;
  37     MemoryRegion iomem;
  38     QEMUTimer *timer;
  39     qemu_irq irq;
  40
  41     uint32_t tick_offset;
  42
  43     uint32_t mr;
  44     uint32_t lr;
  45     uint32_t cr;
  46     uint32_t im;
  47     uint32_t is;
  48 } pl031_state;
  49
  50 static const VMStateDescription vmstate_pl031 = {
  51     .name = "pl031",
  52     .version_id = 1,
  53     .minimum_version_id = 1,
  54     .fields = (VMStateField[]) {
  55         VMSTATE_UINT32(tick_offset, pl031_state),
  56         VMSTATE_UINT32(mr, pl031_state),
  57         VMSTATE_UINT32(lr, pl031_state),
  58         VMSTATE_UINT32(cr, pl031_state),
  59         VMSTATE_UINT32(im, pl031_state),
  60         VMSTATE_UINT32(is, pl031_state),
  61         VMSTATE_END_OF_LIST()
  62     }
  63 };
  64
  65 static const unsigned char pl031_id[] = {
  66     0x31, 0x10, 0x14, 0x00,         /* Device ID        */
  67     0x0d, 0xf0, 0x05, 0xb1          /* Cell ID      */
  68 };
  69
  70 static void pl031_update(pl031_state *s)
  71 {
  72     qemu_set_irq(s->irq, s->is & s->im);
  73 }
  74
  75 static void pl031_interrupt(void * opaque)
  76 {
  77     pl031_state *s = (pl031_state *)opaque;
  78
  79     s->im = 1;
  80     DPRINTF("Alarm raised\n");
  81     pl031_update(s);
  82 }
  83
  84 static uint32_t pl031_get_count(pl031_state *s)
  85 {
  86     /* This assumes qemu_get_clock_ns returns the time since the machine was
  87        created.  */
  88     return s->tick_offset + qemu_get_clock_ns(vm_clock) / get_ticks_per_sec();
  89 }
  90
  91 static void pl031_set_alarm(pl031_state *s)
  92 {
  93     int64_t now;
  94     uint32_t ticks;
  95
  96     now = qemu_get_clock_ns(vm_clock);
  97     ticks = s->tick_offset + now / get_ticks_per_sec();
  98
  99     /* The timer wraps around.  This subtraction also wraps in the same way,
 100        and gives correct results when alarm < now_ticks.  */
 101     ticks = s->mr - ticks;
 102     DPRINTF("Alarm set in %ud ticks\n", ticks);
 103     if (ticks == 0) {
 104         qemu_del_timer(s->timer);
 105         pl031_interrupt(s);
 106     } else {
 107         qemu_mod_timer(s->timer, now + (int64_t)ticks * get_ticks_per_sec());
 108     }
 109 }
 110
 111 static uint64_t pl031_read(void *opaque, target_phys_addr_t offset,
 112                            unsigned size)
 113 {
 114     pl031_state *s = (pl031_state *)opaque;
 115
 116     if (offset >= 0xfe0  &&  offset < 0x1000)
 117         return pl031_id[(offset - 0xfe0) >> 2];
 118
 119     switch (offset) {
 120     case RTC_DR:
 121         return pl031_get_count(s);
 122     case RTC_MR:
 123         return s->mr;
 124     case RTC_IMSC:
 125         return s->im;
 126     case RTC_RIS:
 127         return s->is;
 128     case RTC_LR:
 129         return s->lr;
 130     case RTC_CR:
 131         /* RTC is permanently enabled.  */
 132         return 1;
 133     case RTC_MIS:
 134         return s->is & s->im;
 135     case RTC_ICR:
 136         fprintf(stderr, "qemu: pl031_read: Unexpected offset 0x%x\n",
 137                 (int)offset);
 138         break;
 139     default:
 140         hw_error("pl031_read: Bad offset 0x%x\n", (int)offset);
 141         break;
 142     }
 143
 144     return 0;
 145 }
 146
 147 static void pl031_write(void * opaque, target_phys_addr_t offset,
 148                         uint64_t value, unsigned size)
 149 {
 150     pl031_state *s = (pl031_state *)opaque;
 151
 152
 153     switch (offset) {
 154     case RTC_LR:
 155         s->tick_offset += value - pl031_get_count(s);
 156         pl031_set_alarm(s);
 157         break;
 158     case RTC_MR:
 159         s->mr = value;
 160         pl031_set_alarm(s);
 161         break;
 162     case RTC_IMSC:
 163         s->im = value & 1;
 164         DPRINTF("Interrupt mask %d\n", s->im);
 165         pl031_update(s);
 166         break;
 167     case RTC_ICR:
 168         /* The PL031 documentation (DDI0224B) states that the interrupt is
 169            cleared when bit 0 of the written value is set.  However the
 170            arm926e documentation (DDI0287B) states that the interrupt is
 171            cleared when any value is written.  */
 172         DPRINTF("Interrupt cleared");
 173         s->is = 0;
 174         pl031_update(s);
 175         break;
 176     case RTC_CR:
 177         /* Written value is ignored.  */
 178         break;
 179
 180     case RTC_DR:
 181     case RTC_MIS:
 182     case RTC_RIS:
 183         fprintf(stderr, "qemu: pl031_write: Unexpected offset 0x%x\n",
 184                 (int)offset);
 185         break;
 186
 187     default:
 188         hw_error("pl031_write: Bad offset 0x%x\n", (int)offset);
 189         break;
 190     }
 191 }
 192
 193 static const MemoryRegionOps pl031_ops = {
 194     .read = pl031_read,
 195     .write = pl031_write,
 196     .endianness = DEVICE_NATIVE_ENDIAN,
 197 };
 198
 199 static int pl031_init(SysBusDevice *dev)
 200 {
 201     pl031_state *s = FROM_SYSBUS(pl031_state, dev);
 202     struct tm tm;
 203
 204     memory_region_init_io(&s->iomem, &pl031_ops, s, "pl031", 0x1000);
 205     sysbus_init_mmio(dev, &s->iomem);
 206
 207     sysbus_init_irq(dev, &s->irq);
 208     /* ??? We assume vm_clock is zero at this point.  */
 209     qemu_get_timedate(&tm, 0);
 210     s->tick_offset = mktimegm(&tm);
 211
 212     s->timer = qemu_new_timer_ns(vm_clock, pl031_interrupt, s);
 213     return 0;
 214 }
 215
 216 static SysBusDeviceInfo pl031_info = {
 217     .init = pl031_init,
 218     .qdev.name = "pl031",
 219     .qdev.size = sizeof(pl031_state),
 220     .qdev.vmsd = &vmstate_pl031,
 221     .qdev.no_user = 1,
 222 };
 223
 224 static void pl031_register_devices(void)
 225 {
 226     sysbus_register_withprop(&pl031_info);
 227 }
 228
 229 device_init(pl031_register_devices)