qemu-log: new option -dfilter to limit output
[qemu/ar7.git] / hw / gpio / max7310.c
blob1bd5eaf911387d486308faeec67710b61582457f
1 /*
2 * MAX7310 8-port GPIO expansion chip.
4 * Copyright (c) 2006 Openedhand Ltd.
5 * Written by Andrzej Zaborowski <balrog@zabor.org>
7 * This file is licensed under GNU GPL.
8 */
10 #include "qemu/osdep.h"
11 #include "hw/i2c/i2c.h"
13 #define TYPE_MAX7310 "max7310"
14 #define MAX7310(obj) OBJECT_CHECK(MAX7310State, (obj), TYPE_MAX7310)
16 typedef struct MAX7310State {
17 I2CSlave parent_obj;
19 int i2c_command_byte;
20 int len;
22 uint8_t level;
23 uint8_t direction;
24 uint8_t polarity;
25 uint8_t status;
26 uint8_t command;
27 qemu_irq handler[8];
28 qemu_irq *gpio_in;
29 } MAX7310State;
31 static void max7310_reset(DeviceState *dev)
33 MAX7310State *s = MAX7310(dev);
35 s->level &= s->direction;
36 s->direction = 0xff;
37 s->polarity = 0xf0;
38 s->status = 0x01;
39 s->command = 0x00;
42 static int max7310_rx(I2CSlave *i2c)
44 MAX7310State *s = MAX7310(i2c);
46 switch (s->command) {
47 case 0x00: /* Input port */
48 return s->level ^ s->polarity;
49 break;
51 case 0x01: /* Output port */
52 return s->level & ~s->direction;
53 break;
55 case 0x02: /* Polarity inversion */
56 return s->polarity;
58 case 0x03: /* Configuration */
59 return s->direction;
61 case 0x04: /* Timeout */
62 return s->status;
63 break;
65 case 0xff: /* Reserved */
66 return 0xff;
68 default:
69 #ifdef VERBOSE
70 printf("%s: unknown register %02x\n", __FUNCTION__, s->command);
71 #endif
72 break;
74 return 0xff;
77 static int max7310_tx(I2CSlave *i2c, uint8_t data)
79 MAX7310State *s = MAX7310(i2c);
80 uint8_t diff;
81 int line;
83 if (s->len ++ > 1) {
84 #ifdef VERBOSE
85 printf("%s: message too long (%i bytes)\n", __FUNCTION__, s->len);
86 #endif
87 return 1;
90 if (s->i2c_command_byte) {
91 s->command = data;
92 s->i2c_command_byte = 0;
93 return 0;
96 switch (s->command) {
97 case 0x01: /* Output port */
98 for (diff = (data ^ s->level) & ~s->direction; diff;
99 diff &= ~(1 << line)) {
100 line = ctz32(diff);
101 if (s->handler[line])
102 qemu_set_irq(s->handler[line], (data >> line) & 1);
104 s->level = (s->level & s->direction) | (data & ~s->direction);
105 break;
107 case 0x02: /* Polarity inversion */
108 s->polarity = data;
109 break;
111 case 0x03: /* Configuration */
112 s->level &= ~(s->direction ^ data);
113 s->direction = data;
114 break;
116 case 0x04: /* Timeout */
117 s->status = data;
118 break;
120 case 0x00: /* Input port - ignore writes */
121 break;
122 default:
123 #ifdef VERBOSE
124 printf("%s: unknown register %02x\n", __FUNCTION__, s->command);
125 #endif
126 return 1;
129 return 0;
132 static void max7310_event(I2CSlave *i2c, enum i2c_event event)
134 MAX7310State *s = MAX7310(i2c);
135 s->len = 0;
137 switch (event) {
138 case I2C_START_SEND:
139 s->i2c_command_byte = 1;
140 break;
141 case I2C_FINISH:
142 #ifdef VERBOSE
143 if (s->len == 1)
144 printf("%s: message too short (%i bytes)\n", __FUNCTION__, s->len);
145 #endif
146 break;
147 default:
148 break;
152 static const VMStateDescription vmstate_max7310 = {
153 .name = "max7310",
154 .version_id = 0,
155 .minimum_version_id = 0,
156 .fields = (VMStateField[]) {
157 VMSTATE_INT32(i2c_command_byte, MAX7310State),
158 VMSTATE_INT32(len, MAX7310State),
159 VMSTATE_UINT8(level, MAX7310State),
160 VMSTATE_UINT8(direction, MAX7310State),
161 VMSTATE_UINT8(polarity, MAX7310State),
162 VMSTATE_UINT8(status, MAX7310State),
163 VMSTATE_UINT8(command, MAX7310State),
164 VMSTATE_I2C_SLAVE(parent_obj, MAX7310State),
165 VMSTATE_END_OF_LIST()
169 static void max7310_gpio_set(void *opaque, int line, int level)
171 MAX7310State *s = (MAX7310State *) opaque;
172 if (line >= ARRAY_SIZE(s->handler) || line < 0)
173 hw_error("bad GPIO line");
175 if (level)
176 s->level |= s->direction & (1 << line);
177 else
178 s->level &= ~(s->direction & (1 << line));
181 /* MAX7310 is SMBus-compatible (can be used with only SMBus protocols),
182 * but also accepts sequences that are not SMBus so return an I2C device. */
183 static int max7310_init(I2CSlave *i2c)
185 MAX7310State *s = MAX7310(i2c);
187 qdev_init_gpio_in(&i2c->qdev, max7310_gpio_set, 8);
188 qdev_init_gpio_out(&i2c->qdev, s->handler, 8);
190 return 0;
193 static void max7310_class_init(ObjectClass *klass, void *data)
195 DeviceClass *dc = DEVICE_CLASS(klass);
196 I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
198 k->init = max7310_init;
199 k->event = max7310_event;
200 k->recv = max7310_rx;
201 k->send = max7310_tx;
202 dc->reset = max7310_reset;
203 dc->vmsd = &vmstate_max7310;
206 static const TypeInfo max7310_info = {
207 .name = TYPE_MAX7310,
208 .parent = TYPE_I2C_SLAVE,
209 .instance_size = sizeof(MAX7310State),
210 .class_init = max7310_class_init,
213 static void max7310_register_types(void)
215 type_register_static(&max7310_info);
218 type_init(max7310_register_types)