hw/dma/pl080.c

   1 /*
   2  * Arm PrimeCell PL080/PL081 DMA controller
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "hw/sysbus.h"
  11 #include "exec/address-spaces.h"
  12
  13 #define PL080_MAX_CHANNELS 8
  14 #define PL080_CONF_E    0x1
  15 #define PL080_CONF_M1   0x2
  16 #define PL080_CONF_M2   0x4
  17
  18 #define PL080_CCONF_H   0x40000
  19 #define PL080_CCONF_A   0x20000
  20 #define PL080_CCONF_L   0x10000
  21 #define PL080_CCONF_ITC 0x08000
  22 #define PL080_CCONF_IE  0x04000
  23 #define PL080_CCONF_E   0x00001
  24
  25 #define PL080_CCTRL_I   0x80000000
  26 #define PL080_CCTRL_DI  0x08000000
  27 #define PL080_CCTRL_SI  0x04000000
  28 #define PL080_CCTRL_D   0x02000000
  29 #define PL080_CCTRL_S   0x01000000
  30
  31 typedef struct {
  32     uint32_t src;
  33     uint32_t dest;
  34     uint32_t lli;
  35     uint32_t ctrl;
  36     uint32_t conf;
  37 } pl080_channel;
  38
  39 #define TYPE_PL080 "pl080"
  40 #define PL080(obj) OBJECT_CHECK(PL080State, (obj), TYPE_PL080)
  41
  42 typedef struct PL080State {
  43     SysBusDevice parent_obj;
  44
  45     MemoryRegion iomem;
  46     uint8_t tc_int;
  47     uint8_t tc_mask;
  48     uint8_t err_int;
  49     uint8_t err_mask;
  50     uint32_t conf;
  51     uint32_t sync;
  52     uint32_t req_single;
  53     uint32_t req_burst;
  54     pl080_channel chan[PL080_MAX_CHANNELS];
  55     int nchannels;
  56     /* Flag to avoid recursive DMA invocations.  */
  57     int running;
  58     qemu_irq irq;
  59 } PL080State;
  60
  61 static const VMStateDescription vmstate_pl080_channel = {
  62     .name = "pl080_channel",
  63     .version_id = 1,
  64     .minimum_version_id = 1,
  65     .fields = (VMStateField[]) {
  66         VMSTATE_UINT32(src, pl080_channel),
  67         VMSTATE_UINT32(dest, pl080_channel),
  68         VMSTATE_UINT32(lli, pl080_channel),
  69         VMSTATE_UINT32(ctrl, pl080_channel),
  70         VMSTATE_UINT32(conf, pl080_channel),
  71         VMSTATE_END_OF_LIST()
  72     }
  73 };
  74
  75 static const VMStateDescription vmstate_pl080 = {
  76     .name = "pl080",
  77     .version_id = 1,
  78     .minimum_version_id = 1,
  79     .fields = (VMStateField[]) {
  80         VMSTATE_UINT8(tc_int, PL080State),
  81         VMSTATE_UINT8(tc_mask, PL080State),
  82         VMSTATE_UINT8(err_int, PL080State),
  83         VMSTATE_UINT8(err_mask, PL080State),
  84         VMSTATE_UINT32(conf, PL080State),
  85         VMSTATE_UINT32(sync, PL080State),
  86         VMSTATE_UINT32(req_single, PL080State),
  87         VMSTATE_UINT32(req_burst, PL080State),
  88         VMSTATE_UINT8(tc_int, PL080State),
  89         VMSTATE_UINT8(tc_int, PL080State),
  90         VMSTATE_UINT8(tc_int, PL080State),
  91         VMSTATE_STRUCT_ARRAY(chan, PL080State, PL080_MAX_CHANNELS,
  92                              1, vmstate_pl080_channel, pl080_channel),
  93         VMSTATE_INT32(running, PL080State),
  94         VMSTATE_END_OF_LIST()
  95     }
  96 };
  97
  98 static const unsigned char pl080_id[] =
  99 { 0x80, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
 100
 101 static const unsigned char pl081_id[] =
 102 { 0x81, 0x10, 0x04, 0x0a, 0x0d, 0xf0, 0x05, 0xb1 };
 103
 104 static void pl080_update(PL080State *s)
 105 {
 106     if ((s->tc_int & s->tc_mask)
 107             || (s->err_int & s->err_mask))
 108         qemu_irq_raise(s->irq);
 109     else
 110         qemu_irq_lower(s->irq);
 111 }
 112
 113 static void pl080_run(PL080State *s)
 114 {
 115     int c;
 116     int flow;
 117     pl080_channel *ch;
 118     int swidth;
 119     int dwidth;
 120     int xsize;
 121     int n;
 122     int src_id;
 123     int dest_id;
 124     int size;
 125     uint8_t buff[4];
 126     uint32_t req;
 127
 128     s->tc_mask = 0;
 129     for (c = 0; c < s->nchannels; c++) {
 130         if (s->chan[c].conf & PL080_CCONF_ITC)
 131             s->tc_mask |= 1 << c;
 132         if (s->chan[c].conf & PL080_CCONF_IE)
 133             s->err_mask |= 1 << c;
 134     }
 135
 136     if ((s->conf & PL080_CONF_E) == 0)
 137         return;
 138
 139 hw_error("DMA active\n");
 140     /* If we are already in the middle of a DMA operation then indicate that
 141        there may be new DMA requests and return immediately.  */
 142     if (s->running) {
 143         s->running++;
 144         return;
 145     }
 146     s->running = 1;
 147     while (s->running) {
 148         for (c = 0; c < s->nchannels; c++) {
 149             ch = &s->chan[c];
 150 again:
 151             /* Test if thiws channel has any pending DMA requests.  */
 152             if ((ch->conf & (PL080_CCONF_H | PL080_CCONF_E))
 153                     != PL080_CCONF_E)
 154                 continue;
 155             flow = (ch->conf >> 11) & 7;
 156             if (flow >= 4) {
 157                 hw_error(
 158                     "pl080_run: Peripheral flow control not implemented\n");
 159             }
 160             src_id = (ch->conf >> 1) & 0x1f;
 161             dest_id = (ch->conf >> 6) & 0x1f;
 162             size = ch->ctrl & 0xfff;
 163             req = s->req_single | s->req_burst;
 164             switch (flow) {
 165             case 0:
 166                 break;
 167             case 1:
 168                 if ((req & (1u << dest_id)) == 0)
 169                     size = 0;
 170                 break;
 171             case 2:
 172                 if ((req & (1u << src_id)) == 0)
 173                     size = 0;
 174                 break;
 175             case 3:
 176                 if ((req & (1u << src_id)) == 0
 177                         || (req & (1u << dest_id)) == 0)
 178                     size = 0;
 179                 break;
 180             }
 181             if (!size)
 182                 continue;
 183
 184             /* Transfer one element.  */
 185             /* ??? Should transfer multiple elements for a burst request.  */
 186             /* ??? Unclear what the proper behavior is when source and
 187                destination widths are different.  */
 188             swidth = 1 << ((ch->ctrl >> 18) & 7);
 189             dwidth = 1 << ((ch->ctrl >> 21) & 7);
 190             for (n = 0; n < dwidth; n+= swidth) {
 191                 cpu_physical_memory_read(ch->src, buff + n, swidth);
 192                 if (ch->ctrl & PL080_CCTRL_SI)
 193                     ch->src += swidth;
 194             }
 195             xsize = (dwidth < swidth) ? swidth : dwidth;
 196             /* ??? This may pad the value incorrectly for dwidth < 32.  */
 197             for (n = 0; n < xsize; n += dwidth) {
 198                 cpu_physical_memory_write(ch->dest + n, buff + n, dwidth);
 199                 if (ch->ctrl & PL080_CCTRL_DI)
 200                     ch->dest += swidth;
 201             }
 202
 203             size--;
 204             ch->ctrl = (ch->ctrl & 0xfffff000) | size;
 205             if (size == 0) {
 206                 /* Transfer complete.  */
 207                 if (ch->lli) {
 208                     ch->src = address_space_ldl_le(&address_space_memory,
 209                                                    ch->lli,
 210                                                    MEMTXATTRS_UNSPECIFIED,
 211                                                    NULL);
 212                     ch->dest = address_space_ldl_le(&address_space_memory,
 213                                                     ch->lli + 4,
 214                                                     MEMTXATTRS_UNSPECIFIED,
 215                                                     NULL);
 216                     ch->ctrl = address_space_ldl_le(&address_space_memory,
 217                                                     ch->lli + 12,
 218                                                     MEMTXATTRS_UNSPECIFIED,
 219                                                     NULL);
 220                     ch->lli = address_space_ldl_le(&address_space_memory,
 221                                                    ch->lli + 8,
 222                                                    MEMTXATTRS_UNSPECIFIED,
 223                                                    NULL);
 224                 } else {
 225                     ch->conf &= ~PL080_CCONF_E;
 226                 }
 227                 if (ch->ctrl & PL080_CCTRL_I) {
 228                     s->tc_int |= 1 << c;
 229                 }
 230             }
 231             goto again;
 232         }
 233         if (--s->running)
 234             s->running = 1;
 235     }
 236 }
 237
 238 static uint64_t pl080_read(void *opaque, hwaddr offset,
 239                            unsigned size)
 240 {
 241     PL080State *s = (PL080State *)opaque;
 242     uint32_t i;
 243     uint32_t mask;
 244
 245     if (offset >= 0xfe0 && offset < 0x1000) {
 246         if (s->nchannels == 8) {
 247             return pl080_id[(offset - 0xfe0) >> 2];
 248         } else {
 249             return pl081_id[(offset - 0xfe0) >> 2];
 250         }
 251     }
 252     if (offset >= 0x100 && offset < 0x200) {
 253         i = (offset & 0xe0) >> 5;
 254         if (i >= s->nchannels)
 255             goto bad_offset;
 256         switch (offset >> 2) {
 257         case 0: /* SrcAddr */
 258             return s->chan[i].src;
 259         case 1: /* DestAddr */
 260             return s->chan[i].dest;
 261         case 2: /* LLI */
 262             return s->chan[i].lli;
 263         case 3: /* Control */
 264             return s->chan[i].ctrl;
 265         case 4: /* Configuration */
 266             return s->chan[i].conf;
 267         default:
 268             goto bad_offset;
 269         }
 270     }
 271     switch (offset >> 2) {
 272     case 0: /* IntStatus */
 273         return (s->tc_int & s->tc_mask) | (s->err_int & s->err_mask);
 274     case 1: /* IntTCStatus */
 275         return (s->tc_int & s->tc_mask);
 276     case 3: /* IntErrorStatus */
 277         return (s->err_int & s->err_mask);
 278     case 5: /* RawIntTCStatus */
 279         return s->tc_int;
 280     case 6: /* RawIntErrorStatus */
 281         return s->err_int;
 282     case 7: /* EnbldChns */
 283         mask = 0;
 284         for (i = 0; i < s->nchannels; i++) {
 285             if (s->chan[i].conf & PL080_CCONF_E)
 286                 mask |= 1 << i;
 287         }
 288         return mask;
 289     case 8: /* SoftBReq */
 290     case 9: /* SoftSReq */
 291     case 10: /* SoftLBReq */
 292     case 11: /* SoftLSReq */
 293         /* ??? Implement these. */
 294         return 0;
 295     case 12: /* Configuration */
 296         return s->conf;
 297     case 13: /* Sync */
 298         return s->sync;
 299     default:
 300     bad_offset:
 301         qemu_log_mask(LOG_GUEST_ERROR,
 302                       "pl080_read: Bad offset %x\n", (int)offset);
 303         return 0;
 304     }
 305 }
 306
 307 static void pl080_write(void *opaque, hwaddr offset,
 308                         uint64_t value, unsigned size)
 309 {
 310     PL080State *s = (PL080State *)opaque;
 311     int i;
 312
 313     if (offset >= 0x100 && offset < 0x200) {
 314         i = (offset & 0xe0) >> 5;
 315         if (i >= s->nchannels)
 316             goto bad_offset;
 317         switch (offset >> 2) {
 318         case 0: /* SrcAddr */
 319             s->chan[i].src = value;
 320             break;
 321         case 1: /* DestAddr */
 322             s->chan[i].dest = value;
 323             break;
 324         case 2: /* LLI */
 325             s->chan[i].lli = value;
 326             break;
 327         case 3: /* Control */
 328             s->chan[i].ctrl = value;
 329             break;
 330         case 4: /* Configuration */
 331             s->chan[i].conf = value;
 332             pl080_run(s);
 333             break;
 334         }
 335     }
 336     switch (offset >> 2) {
 337     case 2: /* IntTCClear */
 338         s->tc_int &= ~value;
 339         break;
 340     case 4: /* IntErrorClear */
 341         s->err_int &= ~value;
 342         break;
 343     case 8: /* SoftBReq */
 344     case 9: /* SoftSReq */
 345     case 10: /* SoftLBReq */
 346     case 11: /* SoftLSReq */
 347         /* ??? Implement these.  */
 348         qemu_log_mask(LOG_UNIMP, "pl080_write: Soft DMA not implemented\n");
 349         break;
 350     case 12: /* Configuration */
 351         s->conf = value;
 352         if (s->conf & (PL080_CONF_M1 | PL080_CONF_M1)) {
 353             qemu_log_mask(LOG_UNIMP,
 354                           "pl080_write: Big-endian DMA not implemented\n");
 355         }
 356         pl080_run(s);
 357         break;
 358     case 13: /* Sync */
 359         s->sync = value;
 360         break;
 361     default:
 362     bad_offset:
 363         qemu_log_mask(LOG_GUEST_ERROR,
 364                       "pl080_write: Bad offset %x\n", (int)offset);
 365     }
 366     pl080_update(s);
 367 }
 368
 369 static const MemoryRegionOps pl080_ops = {
 370     .read = pl080_read,
 371     .write = pl080_write,
 372     .endianness = DEVICE_NATIVE_ENDIAN,
 373 };
 374
 375 static void pl080_init(Object *obj)
 376 {
 377     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
 378     PL080State *s = PL080(obj);
 379
 380     memory_region_init_io(&s->iomem, OBJECT(s), &pl080_ops, s, "pl080", 0x1000);
 381     sysbus_init_mmio(sbd, &s->iomem);
 382     sysbus_init_irq(sbd, &s->irq);
 383     s->nchannels = 8;
 384 }
 385
 386 static void pl081_init(Object *obj)
 387 {
 388     PL080State *s = PL080(obj);
 389
 390     s->nchannels = 2;
 391 }
 392
 393 static void pl080_class_init(ObjectClass *oc, void *data)
 394 {
 395     DeviceClass *dc = DEVICE_CLASS(oc);
 396
 397     dc->vmsd = &vmstate_pl080;
 398 }
 399
 400 static const TypeInfo pl080_info = {
 401     .name          = TYPE_PL080,
 402     .parent        = TYPE_SYS_BUS_DEVICE,
 403     .instance_size = sizeof(PL080State),
 404     .instance_init = pl080_init,
 405     .class_init    = pl080_class_init,
 406 };
 407
 408 static const TypeInfo pl081_info = {
 409     .name          = "pl081",
 410     .parent        = TYPE_PL080,
 411     .instance_init = pl081_init,
 412 };
 413
 414 /* The PL080 and PL081 are the same except for the number of channels
 415    they implement (8 and 2 respectively).  */
 416 static void pl080_register_types(void)
 417 {
 418     type_register_static(&pl080_info);
 419     type_register_static(&pl081_info);
 420 }
 421
 422 type_init(pl080_register_types)