hw/misc/tz-mpc.c

   1 /*
   2  * ARM AHB5 TrustZone Memory Protection Controller emulation
   3  *
   4  * Copyright (c) 2018 Linaro Limited
   5  * Written by Peter Maydell
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 or
   9  * (at your option) any later version.
  10  */
  11
  12 #include "qemu/osdep.h"
  13 #include "qemu/log.h"
  14 #include "qapi/error.h"
  15 #include "trace.h"
  16 #include "hw/sysbus.h"
  17 #include "hw/registerfields.h"
  18 #include "hw/misc/tz-mpc.h"
  19
  20 /* Our IOMMU has two IOMMU indexes, one for secure transactions and one for
  21  * non-secure transactions.
  22  */
  23 enum {
  24     IOMMU_IDX_S,
  25     IOMMU_IDX_NS,
  26     IOMMU_NUM_INDEXES,
  27 };
  28
  29 /* Config registers */
  30 REG32(CTRL, 0x00)
  31     FIELD(CTRL, SEC_RESP, 4, 1)
  32     FIELD(CTRL, AUTOINC, 8, 1)
  33     FIELD(CTRL, LOCKDOWN, 31, 1)
  34 REG32(BLK_MAX, 0x10)
  35 REG32(BLK_CFG, 0x14)
  36 REG32(BLK_IDX, 0x18)
  37 REG32(BLK_LUT, 0x1c)
  38 REG32(INT_STAT, 0x20)
  39     FIELD(INT_STAT, IRQ, 0, 1)
  40 REG32(INT_CLEAR, 0x24)
  41     FIELD(INT_CLEAR, IRQ, 0, 1)
  42 REG32(INT_EN, 0x28)
  43     FIELD(INT_EN, IRQ, 0, 1)
  44 REG32(INT_INFO1, 0x2c)
  45 REG32(INT_INFO2, 0x30)
  46     FIELD(INT_INFO2, HMASTER, 0, 16)
  47     FIELD(INT_INFO2, HNONSEC, 16, 1)
  48     FIELD(INT_INFO2, CFG_NS, 17, 1)
  49 REG32(INT_SET, 0x34)
  50     FIELD(INT_SET, IRQ, 0, 1)
  51 REG32(PIDR4, 0xfd0)
  52 REG32(PIDR5, 0xfd4)
  53 REG32(PIDR6, 0xfd8)
  54 REG32(PIDR7, 0xfdc)
  55 REG32(PIDR0, 0xfe0)
  56 REG32(PIDR1, 0xfe4)
  57 REG32(PIDR2, 0xfe8)
  58 REG32(PIDR3, 0xfec)
  59 REG32(CIDR0, 0xff0)
  60 REG32(CIDR1, 0xff4)
  61 REG32(CIDR2, 0xff8)
  62 REG32(CIDR3, 0xffc)
  63
  64 static const uint8_t tz_mpc_idregs[] = {
  65     0x04, 0x00, 0x00, 0x00,
  66     0x60, 0xb8, 0x1b, 0x00,
  67     0x0d, 0xf0, 0x05, 0xb1,
  68 };
  69
  70 static void tz_mpc_irq_update(TZMPC *s)
  71 {
  72     qemu_set_irq(s->irq, s->int_stat && s->int_en);
  73 }
  74
  75 static void tz_mpc_iommu_notify(TZMPC *s, uint32_t lutidx,
  76                                 uint32_t oldlut, uint32_t newlut)
  77 {
  78     /* Called when the LUT word at lutidx has changed from oldlut to newlut;
  79      * must call the IOMMU notifiers for the changed blocks.
  80      */
  81     IOMMUTLBEntry entry = {
  82         .addr_mask = s->blocksize - 1,
  83     };
  84     hwaddr addr = lutidx * s->blocksize * 32;
  85     int i;
  86
  87     for (i = 0; i < 32; i++, addr += s->blocksize) {
  88         bool block_is_ns;
  89
  90         if (!((oldlut ^ newlut) & (1 << i))) {
  91             continue;
  92         }
  93         /* This changes the mappings for both the S and the NS space,
  94          * so we need to do four notifies: an UNMAP then a MAP for each.
  95          */
  96         block_is_ns = newlut & (1 << i);
  97
  98         trace_tz_mpc_iommu_notify(addr);
  99         entry.iova = addr;
 100         entry.translated_addr = addr;
 101
 102         entry.perm = IOMMU_NONE;
 103         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, entry);
 104         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, entry);
 105
 106         entry.perm = IOMMU_RW;
 107         if (block_is_ns) {
 108             entry.target_as = &s->blocked_io_as;
 109         } else {
 110             entry.target_as = &s->downstream_as;
 111         }
 112         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, entry);
 113         if (block_is_ns) {
 114             entry.target_as = &s->downstream_as;
 115         } else {
 116             entry.target_as = &s->blocked_io_as;
 117         }
 118         memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, entry);
 119     }
 120 }
 121
 122 static void tz_mpc_autoinc_idx(TZMPC *s, unsigned access_size)
 123 {
 124     /* Auto-increment BLK_IDX if necessary */
 125     if (access_size == 4 && (s->ctrl & R_CTRL_AUTOINC_MASK)) {
 126         s->blk_idx++;
 127         s->blk_idx %= s->blk_max;
 128     }
 129 }
 130
 131 static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr,
 132                                    uint64_t *pdata,
 133                                    unsigned size, MemTxAttrs attrs)
 134 {
 135     TZMPC *s = TZ_MPC(opaque);
 136     uint64_t r;
 137     uint32_t offset = addr & ~0x3;
 138
 139     if (!attrs.secure && offset < A_PIDR4) {
 140         /* NS accesses can only see the ID registers */
 141         qemu_log_mask(LOG_GUEST_ERROR,
 142                       "TZ MPC register read: NS access to offset 0x%x\n",
 143                       offset);
 144         r = 0;
 145         goto read_out;
 146     }
 147
 148     switch (offset) {
 149     case A_CTRL:
 150         r = s->ctrl;
 151         break;
 152     case A_BLK_MAX:
 153         r = s->blk_max - 1;
 154         break;
 155     case A_BLK_CFG:
 156         /* We are never in "init in progress state", so this just indicates
 157          * the block size. s->blocksize == (1 << BLK_CFG + 5), so
 158          * BLK_CFG == ctz32(s->blocksize) - 5
 159          */
 160         r = ctz32(s->blocksize) - 5;
 161         break;
 162     case A_BLK_IDX:
 163         r = s->blk_idx;
 164         break;
 165     case A_BLK_LUT:
 166         r = s->blk_lut[s->blk_idx];
 167         tz_mpc_autoinc_idx(s, size);
 168         break;
 169     case A_INT_STAT:
 170         r = s->int_stat;
 171         break;
 172     case A_INT_EN:
 173         r = s->int_en;
 174         break;
 175     case A_INT_INFO1:
 176         r = s->int_info1;
 177         break;
 178     case A_INT_INFO2:
 179         r = s->int_info2;
 180         break;
 181     case A_PIDR4:
 182     case A_PIDR5:
 183     case A_PIDR6:
 184     case A_PIDR7:
 185     case A_PIDR0:
 186     case A_PIDR1:
 187     case A_PIDR2:
 188     case A_PIDR3:
 189     case A_CIDR0:
 190     case A_CIDR1:
 191     case A_CIDR2:
 192     case A_CIDR3:
 193         r = tz_mpc_idregs[(offset - A_PIDR4) / 4];
 194         break;
 195     case A_INT_CLEAR:
 196     case A_INT_SET:
 197         qemu_log_mask(LOG_GUEST_ERROR,
 198                       "TZ MPC register read: write-only offset 0x%x\n",
 199                       offset);
 200         r = 0;
 201         break;
 202     default:
 203         qemu_log_mask(LOG_GUEST_ERROR,
 204                       "TZ MPC register read: bad offset 0x%x\n", offset);
 205         r = 0;
 206         break;
 207     }
 208
 209     if (size != 4) {
 210         /* None of our registers are read-sensitive (except BLK_LUT,
 211          * which can special case the "size not 4" case), so just
 212          * pull the right bytes out of the word read result.
 213          */
 214         r = extract32(r, (addr & 3) * 8, size * 8);
 215     }
 216
 217 read_out:
 218     trace_tz_mpc_reg_read(addr, r, size);
 219     *pdata = r;
 220     return MEMTX_OK;
 221 }
 222
 223 static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
 224                                     uint64_t value,
 225                                     unsigned size, MemTxAttrs attrs)
 226 {
 227     TZMPC *s = TZ_MPC(opaque);
 228     uint32_t offset = addr & ~0x3;
 229
 230     trace_tz_mpc_reg_write(addr, value, size);
 231
 232     if (!attrs.secure && offset < A_PIDR4) {
 233         /* NS accesses can only see the ID registers */
 234         qemu_log_mask(LOG_GUEST_ERROR,
 235                       "TZ MPC register write: NS access to offset 0x%x\n",
 236                       offset);
 237         return MEMTX_OK;
 238     }
 239
 240     if (size != 4) {
 241         /* Expand the byte or halfword write to a full word size.
 242          * In most cases we can do this with zeroes; the exceptions
 243          * are CTRL, BLK_IDX and BLK_LUT.
 244          */
 245         uint32_t oldval;
 246
 247         switch (offset) {
 248         case A_CTRL:
 249             oldval = s->ctrl;
 250             break;
 251         case A_BLK_IDX:
 252             oldval = s->blk_idx;
 253             break;
 254         case A_BLK_LUT:
 255             oldval = s->blk_lut[s->blk_idx];
 256             break;
 257         default:
 258             oldval = 0;
 259             break;
 260         }
 261         value = deposit32(oldval, (addr & 3) * 8, size * 8, value);
 262     }
 263
 264     if ((s->ctrl & R_CTRL_LOCKDOWN_MASK) &&
 265         (offset == A_CTRL || offset == A_BLK_LUT || offset == A_INT_EN)) {
 266         /* Lockdown mode makes these three registers read-only, and
 267          * the only way out of it is to reset the device.
 268          */
 269         qemu_log_mask(LOG_GUEST_ERROR, "TZ MPC register write to offset 0x%x "
 270                       "while MPC is in lockdown mode\n", offset);
 271         return MEMTX_OK;
 272     }
 273
 274     switch (offset) {
 275     case A_CTRL:
 276         /* We don't implement the 'data gating' feature so all other bits
 277          * are reserved and we make them RAZ/WI.
 278          */
 279         s->ctrl = value & (R_CTRL_SEC_RESP_MASK |
 280                            R_CTRL_AUTOINC_MASK |
 281                            R_CTRL_LOCKDOWN_MASK);
 282         break;
 283     case A_BLK_IDX:
 284         s->blk_idx = value % s->blk_max;
 285         break;
 286     case A_BLK_LUT:
 287         tz_mpc_iommu_notify(s, s->blk_idx, s->blk_lut[s->blk_idx], value);
 288         s->blk_lut[s->blk_idx] = value;
 289         tz_mpc_autoinc_idx(s, size);
 290         break;
 291     case A_INT_CLEAR:
 292         if (value & R_INT_CLEAR_IRQ_MASK) {
 293             s->int_stat = 0;
 294             tz_mpc_irq_update(s);
 295         }
 296         break;
 297     case A_INT_EN:
 298         s->int_en = value & R_INT_EN_IRQ_MASK;
 299         tz_mpc_irq_update(s);
 300         break;
 301     case A_INT_SET:
 302         if (value & R_INT_SET_IRQ_MASK) {
 303             s->int_stat = R_INT_STAT_IRQ_MASK;
 304             tz_mpc_irq_update(s);
 305         }
 306         break;
 307     case A_PIDR4:
 308     case A_PIDR5:
 309     case A_PIDR6:
 310     case A_PIDR7:
 311     case A_PIDR0:
 312     case A_PIDR1:
 313     case A_PIDR2:
 314     case A_PIDR3:
 315     case A_CIDR0:
 316     case A_CIDR1:
 317     case A_CIDR2:
 318     case A_CIDR3:
 319         qemu_log_mask(LOG_GUEST_ERROR,
 320                       "TZ MPC register write: read-only offset 0x%x\n", offset);
 321         break;
 322     default:
 323         qemu_log_mask(LOG_GUEST_ERROR,
 324                       "TZ MPC register write: bad offset 0x%x\n", offset);
 325         break;
 326     }
 327
 328     return MEMTX_OK;
 329 }
 330
 331 static const MemoryRegionOps tz_mpc_reg_ops = {
 332     .read_with_attrs = tz_mpc_reg_read,
 333     .write_with_attrs = tz_mpc_reg_write,
 334     .endianness = DEVICE_LITTLE_ENDIAN,
 335     .valid.min_access_size = 1,
 336     .valid.max_access_size = 4,
 337     .impl.min_access_size = 1,
 338     .impl.max_access_size = 4,
 339 };
 340
 341 static inline bool tz_mpc_cfg_ns(TZMPC *s, hwaddr addr)
 342 {
 343     /* Return the cfg_ns bit from the LUT for the specified address */
 344     hwaddr blknum = addr / s->blocksize;
 345     hwaddr blkword = blknum / 32;
 346     uint32_t blkbit = 1U << (blknum % 32);
 347
 348     /* This would imply the address was larger than the size we
 349      * defined this memory region to be, so it can't happen.
 350      */
 351     assert(blkword < s->blk_max);
 352     return s->blk_lut[blkword] & blkbit;
 353 }
 354
 355 static MemTxResult tz_mpc_handle_block(TZMPC *s, hwaddr addr, MemTxAttrs attrs)
 356 {
 357     /* Handle a blocked transaction: raise IRQ, capture info, etc */
 358     if (!s->int_stat) {
 359         /* First blocked transfer: capture information into INT_INFO1 and
 360          * INT_INFO2. Subsequent transfers are still blocked but don't
 361          * capture information until the guest clears the interrupt.
 362          */
 363
 364         s->int_info1 = addr;
 365         s->int_info2 = 0;
 366         s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HMASTER,
 367                                   attrs.requester_id & 0xffff);
 368         s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HNONSEC,
 369                                   ~attrs.secure);
 370         s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, CFG_NS,
 371                                   tz_mpc_cfg_ns(s, addr));
 372         s->int_stat |= R_INT_STAT_IRQ_MASK;
 373         tz_mpc_irq_update(s);
 374     }
 375
 376     /* Generate bus error if desired; otherwise RAZ/WI */
 377     return (s->ctrl & R_CTRL_SEC_RESP_MASK) ? MEMTX_ERROR : MEMTX_OK;
 378 }
 379
 380 /* Accesses only reach these read and write functions if the MPC is
 381  * blocking them; non-blocked accesses go directly to the downstream
 382  * memory region without passing through this code.
 383  */
 384 static MemTxResult tz_mpc_mem_blocked_read(void *opaque, hwaddr addr,
 385                                            uint64_t *pdata,
 386                                            unsigned size, MemTxAttrs attrs)
 387 {
 388     TZMPC *s = TZ_MPC(opaque);
 389
 390     trace_tz_mpc_mem_blocked_read(addr, size, attrs.secure);
 391
 392     *pdata = 0;
 393     return tz_mpc_handle_block(s, addr, attrs);
 394 }
 395
 396 static MemTxResult tz_mpc_mem_blocked_write(void *opaque, hwaddr addr,
 397                                             uint64_t value,
 398                                             unsigned size, MemTxAttrs attrs)
 399 {
 400     TZMPC *s = TZ_MPC(opaque);
 401
 402     trace_tz_mpc_mem_blocked_write(addr, value, size, attrs.secure);
 403
 404     return tz_mpc_handle_block(s, addr, attrs);
 405 }
 406
 407 static const MemoryRegionOps tz_mpc_mem_blocked_ops = {
 408     .read_with_attrs = tz_mpc_mem_blocked_read,
 409     .write_with_attrs = tz_mpc_mem_blocked_write,
 410     .endianness = DEVICE_LITTLE_ENDIAN,
 411     .valid.min_access_size = 1,
 412     .valid.max_access_size = 8,
 413     .impl.min_access_size = 1,
 414     .impl.max_access_size = 8,
 415 };
 416
 417 static IOMMUTLBEntry tz_mpc_translate(IOMMUMemoryRegion *iommu,
 418                                       hwaddr addr, IOMMUAccessFlags flags,
 419                                       int iommu_idx)
 420 {
 421     TZMPC *s = TZ_MPC(container_of(iommu, TZMPC, upstream));
 422     bool ok;
 423
 424     IOMMUTLBEntry ret = {
 425         .iova = addr & ~(s->blocksize - 1),
 426         .translated_addr = addr & ~(s->blocksize - 1),
 427         .addr_mask = s->blocksize - 1,
 428         .perm = IOMMU_RW,
 429     };
 430
 431     /* Look at the per-block configuration for this address, and
 432      * return a TLB entry directing the transaction at either
 433      * downstream_as or blocked_io_as, as appropriate.
 434      * If the LUT cfg_ns bit is 1, only non-secure transactions
 435      * may pass. If the bit is 0, only secure transactions may pass.
 436      */
 437     ok = tz_mpc_cfg_ns(s, addr) == (iommu_idx == IOMMU_IDX_NS);
 438
 439     trace_tz_mpc_translate(addr, flags,
 440                            iommu_idx == IOMMU_IDX_S ? "S" : "NS",
 441                            ok ? "pass" : "block");
 442
 443     ret.target_as = ok ? &s->downstream_as : &s->blocked_io_as;
 444     return ret;
 445 }
 446
 447 static int tz_mpc_attrs_to_index(IOMMUMemoryRegion *iommu, MemTxAttrs attrs)
 448 {
 449     /* We treat unspecified attributes like secure. Transactions with
 450      * unspecified attributes come from places like
 451      * rom_reset() for initial image load, and we want
 452      * those to pass through the from-reset "everything is secure" config.
 453      * All the real during-emulation transactions from the CPU will
 454      * specify attributes.
 455      */
 456     return (attrs.unspecified || attrs.secure) ? IOMMU_IDX_S : IOMMU_IDX_NS;
 457 }
 458
 459 static int tz_mpc_num_indexes(IOMMUMemoryRegion *iommu)
 460 {
 461     return IOMMU_NUM_INDEXES;
 462 }
 463
 464 static void tz_mpc_reset(DeviceState *dev)
 465 {
 466     TZMPC *s = TZ_MPC(dev);
 467
 468     s->ctrl = 0x00000100;
 469     s->blk_idx = 0;
 470     s->int_stat = 0;
 471     s->int_en = 1;
 472     s->int_info1 = 0;
 473     s->int_info2 = 0;
 474
 475     memset(s->blk_lut, 0, s->blk_max * sizeof(uint32_t));
 476 }
 477
 478 static void tz_mpc_init(Object *obj)
 479 {
 480     DeviceState *dev = DEVICE(obj);
 481     TZMPC *s = TZ_MPC(obj);
 482
 483     qdev_init_gpio_out_named(dev, &s->irq, "irq", 1);
 484 }
 485
 486 static void tz_mpc_realize(DeviceState *dev, Error **errp)
 487 {
 488     Object *obj = OBJECT(dev);
 489     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 490     TZMPC *s = TZ_MPC(dev);
 491     uint64_t size;
 492
 493     /* We can't create the upstream end of the port until realize,
 494      * as we don't know the size of the MR used as the downstream until then.
 495      * We insist on having a downstream, to avoid complicating the code
 496      * with handling the "don't know how big this is" case. It's easy
 497      * enough for the user to create an unimplemented_device as downstream
 498      * if they have nothing else to plug into this.
 499      */
 500     if (!s->downstream) {
 501         error_setg(errp, "MPC 'downstream' link not set");
 502         return;
 503     }
 504
 505     size = memory_region_size(s->downstream);
 506
 507     memory_region_init_iommu(&s->upstream, sizeof(s->upstream),
 508                              TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
 509                              obj, "tz-mpc-upstream", size);
 510
 511     /* In real hardware the block size is configurable. In QEMU we could
 512      * make it configurable but will need it to be at least as big as the
 513      * target page size so we can execute out of the resulting MRs. Guest
 514      * software is supposed to check the block size using the BLK_CFG
 515      * register, so make it fixed at the page size.
 516      */
 517     s->blocksize = memory_region_iommu_get_min_page_size(&s->upstream);
 518     if (size % s->blocksize != 0) {
 519         error_setg(errp,
 520                    "MPC 'downstream' size %" PRId64
 521                    " is not a multiple of %" HWADDR_PRIx " bytes",
 522                    size, s->blocksize);
 523         object_unref(OBJECT(&s->upstream));
 524         return;
 525     }
 526
 527     /* BLK_MAX is the max value of BLK_IDX, which indexes an array of 32-bit
 528      * words, each bit of which indicates one block.
 529      */
 530     s->blk_max = DIV_ROUND_UP(size / s->blocksize, 32);
 531
 532     memory_region_init_io(&s->regmr, obj, &tz_mpc_reg_ops,
 533                           s, "tz-mpc-regs", 0x1000);
 534     sysbus_init_mmio(sbd, &s->regmr);
 535
 536     sysbus_init_mmio(sbd, MEMORY_REGION(&s->upstream));
 537
 538     /* This memory region is not exposed to users of this device as a
 539      * sysbus MMIO region, but is instead used internally as something
 540      * that our IOMMU translate function might direct accesses to.
 541      */
 542     memory_region_init_io(&s->blocked_io, obj, &tz_mpc_mem_blocked_ops,
 543                           s, "tz-mpc-blocked-io", size);
 544
 545     address_space_init(&s->downstream_as, s->downstream,
 546                        "tz-mpc-downstream");
 547     address_space_init(&s->blocked_io_as, &s->blocked_io,
 548                        "tz-mpc-blocked-io");
 549
 550     s->blk_lut = g_new0(uint32_t, s->blk_max);
 551 }
 552
 553 static int tz_mpc_post_load(void *opaque, int version_id)
 554 {
 555     TZMPC *s = TZ_MPC(opaque);
 556
 557     /* Check the incoming data doesn't point blk_idx off the end of blk_lut. */
 558     if (s->blk_idx >= s->blk_max) {
 559         return -1;
 560     }
 561     return 0;
 562 }
 563
 564 static const VMStateDescription tz_mpc_vmstate = {
 565     .name = "tz-mpc",
 566     .version_id = 1,
 567     .minimum_version_id = 1,
 568     .post_load = tz_mpc_post_load,
 569     .fields = (VMStateField[]) {
 570         VMSTATE_UINT32(ctrl, TZMPC),
 571         VMSTATE_UINT32(blk_idx, TZMPC),
 572         VMSTATE_UINT32(int_stat, TZMPC),
 573         VMSTATE_UINT32(int_en, TZMPC),
 574         VMSTATE_UINT32(int_info1, TZMPC),
 575         VMSTATE_UINT32(int_info2, TZMPC),
 576         VMSTATE_VARRAY_UINT32(blk_lut, TZMPC, blk_max,
 577                               0, vmstate_info_uint32, uint32_t),
 578         VMSTATE_END_OF_LIST()
 579     }
 580 };
 581
 582 static Property tz_mpc_properties[] = {
 583     DEFINE_PROP_LINK("downstream", TZMPC, downstream,
 584                      TYPE_MEMORY_REGION, MemoryRegion *),
 585     DEFINE_PROP_END_OF_LIST(),
 586 };
 587
 588 static void tz_mpc_class_init(ObjectClass *klass, void *data)
 589 {
 590     DeviceClass *dc = DEVICE_CLASS(klass);
 591
 592     dc->realize = tz_mpc_realize;
 593     dc->vmsd = &tz_mpc_vmstate;
 594     dc->reset = tz_mpc_reset;
 595     dc->props = tz_mpc_properties;
 596 }
 597
 598 static const TypeInfo tz_mpc_info = {
 599     .name = TYPE_TZ_MPC,
 600     .parent = TYPE_SYS_BUS_DEVICE,
 601     .instance_size = sizeof(TZMPC),
 602     .instance_init = tz_mpc_init,
 603     .class_init = tz_mpc_class_init,
 604 };
 605
 606 static void tz_mpc_iommu_memory_region_class_init(ObjectClass *klass,
 607                                                   void *data)
 608 {
 609     IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
 610
 611     imrc->translate = tz_mpc_translate;
 612     imrc->attrs_to_index = tz_mpc_attrs_to_index;
 613     imrc->num_indexes = tz_mpc_num_indexes;
 614 }
 615
 616 static const TypeInfo tz_mpc_iommu_memory_region_info = {
 617     .name = TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
 618     .parent = TYPE_IOMMU_MEMORY_REGION,
 619     .class_init = tz_mpc_iommu_memory_region_class_init,
 620 };
 621
 622 static void tz_mpc_register_types(void)
 623 {
 624     type_register_static(&tz_mpc_info);
 625     type_register_static(&tz_mpc_iommu_memory_region_info);
 626 }
 627
 628 type_init(tz_mpc_register_types);