2 * ARM Integrator CP System emulation.
4 * Copyright (c) 2005-2007 CodeSourcery.
5 * Written by Paul Brook
7 * This code is licenced under the GPL
11 #include "primecell.h"
20 uint32_t flash_offset
;
34 static uint8_t integrator_spd
[128] = {
35 128, 8, 4, 11, 9, 1, 64, 0, 2, 0xa0, 0xa0, 0, 0, 8, 0, 1,
36 0xe, 4, 0x1c, 1, 2, 0x20, 0xc0, 0, 0, 0, 0, 0x30, 0x28, 0x30, 0x28, 0x40
39 static uint32_t integratorcm_read(void *opaque
, target_phys_addr_t offset
)
41 integratorcm_state
*s
= (integratorcm_state
*)opaque
;
42 if (offset
>= 0x100 && offset
< 0x200) {
46 return integrator_spd
[offset
>> 2];
48 switch (offset
>> 2) {
60 if (s
->cm_lock
== 0xa05f) {
65 case 6: /* CM_LMBUSCNT */
66 /* ??? High frequency timer. */
67 hw_error("integratorcm_read: CM_LMBUSCNT");
68 case 7: /* CM_AUXOSC */
70 case 8: /* CM_SDRAM */
74 case 10: /* CM_REFCT */
75 /* ??? High frequency timer. */
76 hw_error("integratorcm_read: CM_REFCT");
77 case 12: /* CM_FLAGS */
79 case 14: /* CM_NVFLAGS */
81 case 16: /* CM_IRQ_STAT */
82 return s
->int_level
& s
->irq_enabled
;
83 case 17: /* CM_IRQ_RSTAT */
85 case 18: /* CM_IRQ_ENSET */
86 return s
->irq_enabled
;
87 case 20: /* CM_SOFT_INTSET */
88 return s
->int_level
& 1;
89 case 24: /* CM_FIQ_STAT */
90 return s
->int_level
& s
->fiq_enabled
;
91 case 25: /* CM_FIQ_RSTAT */
93 case 26: /* CM_FIQ_ENSET */
94 return s
->fiq_enabled
;
95 case 32: /* CM_VOLTAGE_CTL0 */
96 case 33: /* CM_VOLTAGE_CTL1 */
97 case 34: /* CM_VOLTAGE_CTL2 */
98 case 35: /* CM_VOLTAGE_CTL3 */
99 /* ??? Voltage control unimplemented. */
102 hw_error("integratorcm_read: Unimplemented offset 0x%x\n",
108 static void integratorcm_do_remap(integratorcm_state
*s
, int flash
)
111 cpu_register_physical_memory(0, 0x100000, IO_MEM_RAM
);
113 cpu_register_physical_memory(0, 0x100000, s
->flash_offset
| IO_MEM_RAM
);
115 //??? tlb_flush (cpu_single_env, 1);
118 static void integratorcm_set_ctrl(integratorcm_state
*s
, uint32_t value
)
121 hw_error("Board reset\n");
123 if ((s
->cm_init
^ value
) & 4) {
124 integratorcm_do_remap(s
, (value
& 4) == 0);
126 if ((s
->cm_init
^ value
) & 1) {
127 printf("Green LED %s\n", (value
& 1) ? "on" : "off");
129 s
->cm_init
= (s
->cm_init
& ~ 5) | (value
^ 5);
132 static void integratorcm_update(integratorcm_state
*s
)
134 /* ??? The CPU irq/fiq is raised when either the core module or base PIC
136 if (s
->int_level
& (s
->irq_enabled
| s
->fiq_enabled
))
137 hw_error("Core module interrupt\n");
140 static void integratorcm_write(void *opaque
, target_phys_addr_t offset
,
143 integratorcm_state
*s
= (integratorcm_state
*)opaque
;
144 switch (offset
>> 2) {
146 if (s
->cm_lock
== 0xa05f)
149 case 3: /* CM_CTRL */
150 integratorcm_set_ctrl(s
, value
);
152 case 5: /* CM_LOCK */
153 s
->cm_lock
= value
& 0xffff;
155 case 7: /* CM_AUXOSC */
156 if (s
->cm_lock
== 0xa05f)
157 s
->cm_auxosc
= value
;
159 case 8: /* CM_SDRAM */
162 case 9: /* CM_INIT */
163 /* ??? This can change the memory bus frequency. */
166 case 12: /* CM_FLAGSS */
167 s
->cm_flags
|= value
;
169 case 13: /* CM_FLAGSC */
170 s
->cm_flags
&= ~value
;
172 case 14: /* CM_NVFLAGSS */
173 s
->cm_nvflags
|= value
;
175 case 15: /* CM_NVFLAGSS */
176 s
->cm_nvflags
&= ~value
;
178 case 18: /* CM_IRQ_ENSET */
179 s
->irq_enabled
|= value
;
180 integratorcm_update(s
);
182 case 19: /* CM_IRQ_ENCLR */
183 s
->irq_enabled
&= ~value
;
184 integratorcm_update(s
);
186 case 20: /* CM_SOFT_INTSET */
187 s
->int_level
|= (value
& 1);
188 integratorcm_update(s
);
190 case 21: /* CM_SOFT_INTCLR */
191 s
->int_level
&= ~(value
& 1);
192 integratorcm_update(s
);
194 case 26: /* CM_FIQ_ENSET */
195 s
->fiq_enabled
|= value
;
196 integratorcm_update(s
);
198 case 27: /* CM_FIQ_ENCLR */
199 s
->fiq_enabled
&= ~value
;
200 integratorcm_update(s
);
202 case 32: /* CM_VOLTAGE_CTL0 */
203 case 33: /* CM_VOLTAGE_CTL1 */
204 case 34: /* CM_VOLTAGE_CTL2 */
205 case 35: /* CM_VOLTAGE_CTL3 */
206 /* ??? Voltage control unimplemented. */
209 hw_error("integratorcm_write: Unimplemented offset 0x%x\n",
215 /* Integrator/CM control registers. */
217 static CPUReadMemoryFunc
*integratorcm_readfn
[] = {
223 static CPUWriteMemoryFunc
*integratorcm_writefn
[] = {
229 static void integratorcm_init(SysBusDevice
*dev
)
232 integratorcm_state
*s
= FROM_SYSBUS(integratorcm_state
, dev
);
235 memsz
= qdev_get_prop_int(&dev
->qdev
, "memsz", 0);
236 s
->cm_osc
= 0x01000048;
237 /* ??? What should the high bits of this value be? */
238 s
->cm_auxosc
= 0x0007feff;
239 s
->cm_sdram
= 0x00011122;
241 integrator_spd
[31] = 64;
243 } else if (memsz
>= 128) {
244 integrator_spd
[31] = 32;
246 } else if (memsz
>= 64) {
247 integrator_spd
[31] = 16;
249 } else if (memsz
>= 32) {
250 integrator_spd
[31] = 4;
253 integrator_spd
[31] = 2;
255 memcpy(integrator_spd
+ 73, "QEMU-MEMORY", 11);
256 s
->cm_init
= 0x00000112;
257 s
->flash_offset
= qemu_ram_alloc(0x100000);
259 iomemtype
= cpu_register_io_memory(integratorcm_readfn
,
260 integratorcm_writefn
, s
);
261 sysbus_init_mmio(dev
, 0x00800000, iomemtype
);
262 integratorcm_do_remap(s
, 1);
263 /* ??? Save/restore. */
266 /* Integrator/CP hardware emulation. */
267 /* Primary interrupt controller. */
269 typedef struct icp_pic_state
273 uint32_t irq_enabled
;
274 uint32_t fiq_enabled
;
279 static void icp_pic_update(icp_pic_state
*s
)
283 flags
= (s
->level
& s
->irq_enabled
);
284 qemu_set_irq(s
->parent_irq
, flags
!= 0);
285 flags
= (s
->level
& s
->fiq_enabled
);
286 qemu_set_irq(s
->parent_fiq
, flags
!= 0);
289 static void icp_pic_set_irq(void *opaque
, int irq
, int level
)
291 icp_pic_state
*s
= (icp_pic_state
*)opaque
;
293 s
->level
|= 1 << irq
;
295 s
->level
&= ~(1 << irq
);
299 static uint32_t icp_pic_read(void *opaque
, target_phys_addr_t offset
)
301 icp_pic_state
*s
= (icp_pic_state
*)opaque
;
303 switch (offset
>> 2) {
304 case 0: /* IRQ_STATUS */
305 return s
->level
& s
->irq_enabled
;
306 case 1: /* IRQ_RAWSTAT */
308 case 2: /* IRQ_ENABLESET */
309 return s
->irq_enabled
;
310 case 4: /* INT_SOFTSET */
312 case 8: /* FRQ_STATUS */
313 return s
->level
& s
->fiq_enabled
;
314 case 9: /* FRQ_RAWSTAT */
316 case 10: /* FRQ_ENABLESET */
317 return s
->fiq_enabled
;
318 case 3: /* IRQ_ENABLECLR */
319 case 5: /* INT_SOFTCLR */
320 case 11: /* FRQ_ENABLECLR */
322 printf ("icp_pic_read: Bad register offset 0x%x\n", (int)offset
);
327 static void icp_pic_write(void *opaque
, target_phys_addr_t offset
,
330 icp_pic_state
*s
= (icp_pic_state
*)opaque
;
332 switch (offset
>> 2) {
333 case 2: /* IRQ_ENABLESET */
334 s
->irq_enabled
|= value
;
336 case 3: /* IRQ_ENABLECLR */
337 s
->irq_enabled
&= ~value
;
339 case 4: /* INT_SOFTSET */
341 icp_pic_set_irq(s
, 0, 1);
343 case 5: /* INT_SOFTCLR */
345 icp_pic_set_irq(s
, 0, 0);
347 case 10: /* FRQ_ENABLESET */
348 s
->fiq_enabled
|= value
;
350 case 11: /* FRQ_ENABLECLR */
351 s
->fiq_enabled
&= ~value
;
353 case 0: /* IRQ_STATUS */
354 case 1: /* IRQ_RAWSTAT */
355 case 8: /* FRQ_STATUS */
356 case 9: /* FRQ_RAWSTAT */
358 printf ("icp_pic_write: Bad register offset 0x%x\n", (int)offset
);
364 static CPUReadMemoryFunc
*icp_pic_readfn
[] = {
370 static CPUWriteMemoryFunc
*icp_pic_writefn
[] = {
376 static void icp_pic_init(SysBusDevice
*dev
)
378 icp_pic_state
*s
= FROM_SYSBUS(icp_pic_state
, dev
);
381 qdev_init_gpio_in(&dev
->qdev
, icp_pic_set_irq
, 32);
382 sysbus_init_irq(dev
, &s
->parent_irq
);
383 sysbus_init_irq(dev
, &s
->parent_fiq
);
384 iomemtype
= cpu_register_io_memory(icp_pic_readfn
,
386 sysbus_init_mmio(dev
, 0x00800000, iomemtype
);
389 /* CP control registers. */
390 static uint32_t icp_control_read(void *opaque
, target_phys_addr_t offset
)
392 switch (offset
>> 2) {
393 case 0: /* CP_IDFIELD */
395 case 1: /* CP_FLASHPROG */
397 case 2: /* CP_INTREG */
399 case 3: /* CP_DECODE */
402 hw_error("icp_control_read: Bad offset %x\n", (int)offset
);
407 static void icp_control_write(void *opaque
, target_phys_addr_t offset
,
410 switch (offset
>> 2) {
411 case 1: /* CP_FLASHPROG */
412 case 2: /* CP_INTREG */
413 case 3: /* CP_DECODE */
414 /* Nothing interesting implemented yet. */
417 hw_error("icp_control_write: Bad offset %x\n", (int)offset
);
420 static CPUReadMemoryFunc
*icp_control_readfn
[] = {
426 static CPUWriteMemoryFunc
*icp_control_writefn
[] = {
432 static void icp_control_init(uint32_t base
)
436 iomemtype
= cpu_register_io_memory(icp_control_readfn
,
437 icp_control_writefn
, NULL
);
438 cpu_register_physical_memory(base
, 0x00800000, iomemtype
);
439 /* ??? Save/restore. */
445 static struct arm_boot_info integrator_binfo
= {
450 static void integratorcp_init(ram_addr_t ram_size
,
451 const char *boot_device
,
452 const char *kernel_filename
, const char *kernel_cmdline
,
453 const char *initrd_filename
, const char *cpu_model
)
456 ram_addr_t ram_offset
;
463 cpu_model
= "arm926";
464 env
= cpu_init(cpu_model
);
466 fprintf(stderr
, "Unable to find CPU definition\n");
469 ram_offset
= qemu_ram_alloc(ram_size
);
470 /* ??? On a real system the first 1Mb is mapped as SSRAM or boot flash. */
471 /* ??? RAM should repeat to fill physical memory space. */
472 /* SDRAM at address zero*/
473 cpu_register_physical_memory(0, ram_size
, ram_offset
| IO_MEM_RAM
);
474 /* And again at address 0x80000000 */
475 cpu_register_physical_memory(0x80000000, ram_size
, ram_offset
| IO_MEM_RAM
);
477 dev
= qdev_create(NULL
, "integrator_core");
478 qdev_set_prop_int(dev
, "memsz", ram_size
>> 20);
480 sysbus_mmio_map((SysBusDevice
*)dev
, 0, 0x10000000);
482 cpu_pic
= arm_pic_init_cpu(env
);
483 dev
= sysbus_create_varargs("integrator_pic", 0x14000000,
484 cpu_pic
[ARM_PIC_CPU_IRQ
],
485 cpu_pic
[ARM_PIC_CPU_FIQ
], NULL
);
486 for (i
= 0; i
< 32; i
++) {
487 pic
[i
] = qdev_get_gpio_in(dev
, i
);
489 sysbus_create_simple("integrator_pic", 0xca000000, pic
[26]);
490 sysbus_create_varargs("integrator_pit", 0x13000000,
491 pic
[5], pic
[6], pic
[7], NULL
);
492 sysbus_create_simple("pl031", 0x15000000, pic
[8]);
493 sysbus_create_simple("pl011", 0x16000000, pic
[1]);
494 sysbus_create_simple("pl011", 0x17000000, pic
[2]);
495 icp_control_init(0xcb000000);
496 sysbus_create_simple("pl050_keyboard", 0x18000000, pic
[3]);
497 sysbus_create_simple("pl050_mouse", 0x19000000, pic
[4]);
498 sysbus_create_varargs("pl181", 0x1c000000, pic
[23], pic
[24], NULL
);
499 if (nd_table
[0].vlan
)
500 smc91c111_init(&nd_table
[0], 0xc8000000, pic
[27]);
502 sysbus_create_simple("pl110", 0xc0000000, pic
[22]);
504 integrator_binfo
.ram_size
= ram_size
;
505 integrator_binfo
.kernel_filename
= kernel_filename
;
506 integrator_binfo
.kernel_cmdline
= kernel_cmdline
;
507 integrator_binfo
.initrd_filename
= initrd_filename
;
508 arm_load_kernel(env
, &integrator_binfo
);
511 static QEMUMachine integratorcp_machine
= {
512 .name
= "integratorcp",
513 .desc
= "ARM Integrator/CP (ARM926EJ-S)",
514 .init
= integratorcp_init
,
518 static void integratorcp_machine_init(void)
520 qemu_register_machine(&integratorcp_machine
);
523 machine_init(integratorcp_machine_init
);
525 static void integratorcp_register_devices(void)
527 sysbus_register_dev("integrator_pic", sizeof(icp_pic_state
), icp_pic_init
);
528 sysbus_register_dev("integrator_core", sizeof(integratorcm_state
),
532 device_init(integratorcp_register_devices
)