hw/pl011.c

   1 /*
   2  * Arm PrimeCell PL011 UART
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11 #include "qemu-char.h"
  12
  13 typedef struct {
  14     SysBusDevice busdev;
  15     uint32_t readbuff;
  16     uint32_t flags;
  17     uint32_t lcr;
  18     uint32_t cr;
  19     uint32_t dmacr;
  20     uint32_t int_enabled;
  21     uint32_t int_level;
  22     uint32_t read_fifo[16];
  23     uint32_t ilpr;
  24     uint32_t ibrd;
  25     uint32_t fbrd;
  26     uint32_t ifl;
  27     int read_pos;
  28     int read_count;
  29     int read_trigger;
  30     CharDriverState *chr;
  31     qemu_irq irq;
  32     const unsigned char *id;
  33 } pl011_state;
  34
  35 #define PL011_INT_TX 0x20
  36 #define PL011_INT_RX 0x10
  37
  38 #define PL011_FLAG_TXFE 0x80
  39 #define PL011_FLAG_RXFF 0x40
  40 #define PL011_FLAG_TXFF 0x20
  41 #define PL011_FLAG_RXFE 0x10
  42
  43 static const unsigned char pl011_id_arm[8] =
  44   { 0x11, 0x10, 0x14, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
  45 static const unsigned char pl011_id_luminary[8] =
  46   { 0x11, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 };
  47
  48 static void pl011_update(pl011_state *s)
  49 {
  50     uint32_t flags;
  51
  52     flags = s->int_level & s->int_enabled;
  53     qemu_set_irq(s->irq, flags != 0);
  54 }
  55
  56 static uint32_t pl011_read(void *opaque, target_phys_addr_t offset)
  57 {
  58     pl011_state *s = (pl011_state *)opaque;
  59     uint32_t c;
  60
  61     if (offset >= 0xfe0 && offset < 0x1000) {
  62         return s->id[(offset - 0xfe0) >> 2];
  63     }
  64     switch (offset >> 2) {
  65     case 0: /* UARTDR */
  66         s->flags &= ~PL011_FLAG_RXFF;
  67         c = s->read_fifo[s->read_pos];
  68         if (s->read_count > 0) {
  69             s->read_count--;
  70             if (++s->read_pos == 16)
  71                 s->read_pos = 0;
  72         }
  73         if (s->read_count == 0) {
  74             s->flags |= PL011_FLAG_RXFE;
  75         }
  76         if (s->read_count == s->read_trigger - 1)
  77             s->int_level &= ~ PL011_INT_RX;
  78         pl011_update(s);
  79         qemu_chr_accept_input(s->chr);
  80         return c;
  81     case 1: /* UARTCR */
  82         return 0;
  83     case 6: /* UARTFR */
  84         return s->flags;
  85     case 8: /* UARTILPR */
  86         return s->ilpr;
  87     case 9: /* UARTIBRD */
  88         return s->ibrd;
  89     case 10: /* UARTFBRD */
  90         return s->fbrd;
  91     case 11: /* UARTLCR_H */
  92         return s->lcr;
  93     case 12: /* UARTCR */
  94         return s->cr;
  95     case 13: /* UARTIFLS */
  96         return s->ifl;
  97     case 14: /* UARTIMSC */
  98         return s->int_enabled;
  99     case 15: /* UARTRIS */
 100         return s->int_level;
 101     case 16: /* UARTMIS */
 102         return s->int_level & s->int_enabled;
 103     case 18: /* UARTDMACR */
 104         return s->dmacr;
 105     default:
 106         hw_error("pl011_read: Bad offset %x\n", (int)offset);
 107         return 0;
 108     }
 109 }
 110
 111 static void pl011_set_read_trigger(pl011_state *s)
 112 {
 113 #if 0
 114     /* The docs say the RX interrupt is triggered when the FIFO exceeds
 115        the threshold.  However linux only reads the FIFO in response to an
 116        interrupt.  Triggering the interrupt when the FIFO is non-empty seems
 117        to make things work.  */
 118     if (s->lcr & 0x10)
 119         s->read_trigger = (s->ifl >> 1) & 0x1c;
 120     else
 121 #endif
 122         s->read_trigger = 1;
 123 }
 124
 125 static void pl011_write(void *opaque, target_phys_addr_t offset,
 126                           uint32_t value)
 127 {
 128     pl011_state *s = (pl011_state *)opaque;
 129     unsigned char ch;
 130
 131     switch (offset >> 2) {
 132     case 0: /* UARTDR */
 133         /* ??? Check if transmitter is enabled.  */
 134         ch = value;
 135         if (s->chr)
 136             qemu_chr_fe_write(s->chr, &ch, 1);
 137         s->int_level |= PL011_INT_TX;
 138         pl011_update(s);
 139         break;
 140     case 1: /* UARTCR */
 141         s->cr = value;
 142         break;
 143     case 6: /* UARTFR */
 144         /* Writes to Flag register are ignored.  */
 145         break;
 146     case 8: /* UARTUARTILPR */
 147         s->ilpr = value;
 148         break;
 149     case 9: /* UARTIBRD */
 150         s->ibrd = value;
 151         break;
 152     case 10: /* UARTFBRD */
 153         s->fbrd = value;
 154         break;
 155     case 11: /* UARTLCR_H */
 156         s->lcr = value;
 157         pl011_set_read_trigger(s);
 158         break;
 159     case 12: /* UARTCR */
 160         /* ??? Need to implement the enable and loopback bits.  */
 161         s->cr = value;
 162         break;
 163     case 13: /* UARTIFS */
 164         s->ifl = value;
 165         pl011_set_read_trigger(s);
 166         break;
 167     case 14: /* UARTIMSC */
 168         s->int_enabled = value;
 169         pl011_update(s);
 170         break;
 171     case 17: /* UARTICR */
 172         s->int_level &= ~value;
 173         pl011_update(s);
 174         break;
 175     case 18: /* UARTDMACR */
 176         s->dmacr = value;
 177         if (value & 3)
 178             hw_error("PL011: DMA not implemented\n");
 179         break;
 180     default:
 181         hw_error("pl011_write: Bad offset %x\n", (int)offset);
 182     }
 183 }
 184
 185 static int pl011_can_receive(void *opaque)
 186 {
 187     pl011_state *s = (pl011_state *)opaque;
 188
 189     if (s->lcr & 0x10)
 190         return s->read_count < 16;
 191     else
 192         return s->read_count < 1;
 193 }
 194
 195 static void pl011_put_fifo(void *opaque, uint32_t value)
 196 {
 197     pl011_state *s = (pl011_state *)opaque;
 198     int slot;
 199
 200     slot = s->read_pos + s->read_count;
 201     if (slot >= 16)
 202         slot -= 16;
 203     s->read_fifo[slot] = value;
 204     s->read_count++;
 205     s->flags &= ~PL011_FLAG_RXFE;
 206     if (s->cr & 0x10 || s->read_count == 16) {
 207         s->flags |= PL011_FLAG_RXFF;
 208     }
 209     if (s->read_count == s->read_trigger) {
 210         s->int_level |= PL011_INT_RX;
 211         pl011_update(s);
 212     }
 213 }
 214
 215 static void pl011_receive(void *opaque, const uint8_t *buf, int size)
 216 {
 217     pl011_put_fifo(opaque, *buf);
 218 }
 219
 220 static void pl011_event(void *opaque, int event)
 221 {
 222     if (event == CHR_EVENT_BREAK)
 223         pl011_put_fifo(opaque, 0x400);
 224 }
 225
 226 static CPUReadMemoryFunc * const pl011_readfn[] = {
 227    pl011_read,
 228    pl011_read,
 229    pl011_read
 230 };
 231
 232 static CPUWriteMemoryFunc * const pl011_writefn[] = {
 233    pl011_write,
 234    pl011_write,
 235    pl011_write
 236 };
 237
 238 static const VMStateDescription vmstate_pl011 = {
 239     .name = "pl011",
 240     .version_id = 1,
 241     .minimum_version_id = 1,
 242     .minimum_version_id_old = 1,
 243     .fields      = (VMStateField[]) {
 244         VMSTATE_UINT32(readbuff, pl011_state),
 245         VMSTATE_UINT32(flags, pl011_state),
 246         VMSTATE_UINT32(lcr, pl011_state),
 247         VMSTATE_UINT32(cr, pl011_state),
 248         VMSTATE_UINT32(dmacr, pl011_state),
 249         VMSTATE_UINT32(int_enabled, pl011_state),
 250         VMSTATE_UINT32(int_level, pl011_state),
 251         VMSTATE_UINT32_ARRAY(read_fifo, pl011_state, 16),
 252         VMSTATE_UINT32(ilpr, pl011_state),
 253         VMSTATE_UINT32(ibrd, pl011_state),
 254         VMSTATE_UINT32(fbrd, pl011_state),
 255         VMSTATE_UINT32(ifl, pl011_state),
 256         VMSTATE_INT32(read_pos, pl011_state),
 257         VMSTATE_INT32(read_count, pl011_state),
 258         VMSTATE_INT32(read_trigger, pl011_state),
 259         VMSTATE_END_OF_LIST()
 260     }
 261 };
 262
 263 static int pl011_init(SysBusDevice *dev, const unsigned char *id)
 264 {
 265     int iomemtype;
 266     pl011_state *s = FROM_SYSBUS(pl011_state, dev);
 267
 268     iomemtype = cpu_register_io_memory(pl011_readfn,
 269                                        pl011_writefn, s,
 270                                        DEVICE_NATIVE_ENDIAN);
 271     sysbus_init_mmio(dev, 0x1000,iomemtype);
 272     sysbus_init_irq(dev, &s->irq);
 273     s->id = id;
 274     s->chr = qdev_init_chardev(&dev->qdev);
 275
 276     s->read_trigger = 1;
 277     s->ifl = 0x12;
 278     s->cr = 0x300;
 279     s->flags = 0x90;
 280     if (s->chr) {
 281         qemu_chr_add_handlers(s->chr, pl011_can_receive, pl011_receive,
 282                               pl011_event, s);
 283     }
 284     vmstate_register(&dev->qdev, -1, &vmstate_pl011, s);
 285     return 0;
 286 }
 287
 288 static int pl011_init_arm(SysBusDevice *dev)
 289 {
 290     return pl011_init(dev, pl011_id_arm);
 291 }
 292
 293 static int pl011_init_luminary(SysBusDevice *dev)
 294 {
 295     return pl011_init(dev, pl011_id_luminary);
 296 }
 297
 298 static void pl011_register_devices(void)
 299 {
 300     sysbus_register_dev("pl011", sizeof(pl011_state),
 301                         pl011_init_arm);
 302     sysbus_register_dev("pl011_luminary", sizeof(pl011_state),
 303                         pl011_init_luminary);
 304 }
 305
 306 device_init(pl011_register_devices)