hw/parallel.c

   1 /*
   2  * QEMU Parallel PORT emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  * Copyright (c) 2007 Marko Kohtala
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25 #include "hw.h"
  26 #include "qemu-char.h"
  27 #include "isa.h"
  28 #include "pc.h"
  29 #include "sysemu.h"
  30
  31 //#define DEBUG_PARALLEL
  32
  33 #ifdef DEBUG_PARALLEL
  34 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
  35 #else
  36 #define pdebug(fmt, ...) ((void)0)
  37 #endif
  38
  39 #define PARA_REG_DATA 0
  40 #define PARA_REG_STS 1
  41 #define PARA_REG_CTR 2
  42 #define PARA_REG_EPP_ADDR 3
  43 #define PARA_REG_EPP_DATA 4
  44
  45 /*
  46  * These are the definitions for the Printer Status Register
  47  */
  48 #define PARA_STS_BUSY   0x80    /* Busy complement */
  49 #define PARA_STS_ACK    0x40    /* Acknowledge */
  50 #define PARA_STS_PAPER  0x20    /* Out of paper */
  51 #define PARA_STS_ONLINE 0x10    /* Online */
  52 #define PARA_STS_ERROR  0x08    /* Error complement */
  53 #define PARA_STS_TMOUT  0x01    /* EPP timeout */
  54
  55 /*
  56  * These are the definitions for the Printer Control Register
  57  */
  58 #define PARA_CTR_DIR    0x20    /* Direction (1=read, 0=write) */
  59 #define PARA_CTR_INTEN  0x10    /* IRQ Enable */
  60 #define PARA_CTR_SELECT 0x08    /* Select In complement */
  61 #define PARA_CTR_INIT   0x04    /* Initialize Printer complement */
  62 #define PARA_CTR_AUTOLF 0x02    /* Auto linefeed complement */
  63 #define PARA_CTR_STROBE 0x01    /* Strobe complement */
  64
  65 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
  66
  67 typedef struct ParallelState {
  68     uint8_t dataw;
  69     uint8_t datar;
  70     uint8_t status;
  71     uint8_t control;
  72     qemu_irq irq;
  73     int irq_pending;
  74     CharDriverState *chr;
  75     int hw_driver;
  76     int epp_timeout;
  77     uint32_t last_read_offset; /* For debugging */
  78     /* Memory-mapped interface */
  79     int it_shift;
  80 } ParallelState;
  81
  82 typedef struct ISAParallelState {
  83     ISADevice dev;
  84     uint32_t index;
  85     uint32_t iobase;
  86     uint32_t isairq;
  87     ParallelState state;
  88 } ISAParallelState;
  89
  90 static void parallel_update_irq(ParallelState *s)
  91 {
  92     if (s->irq_pending)
  93         qemu_irq_raise(s->irq);
  94     else
  95         qemu_irq_lower(s->irq);
  96 }
  97
  98 static void
  99 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
 100 {
 101     ParallelState *s = opaque;
 102
 103     pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
 104
 105     addr &= 7;
 106     switch(addr) {
 107     case PARA_REG_DATA:
 108         s->dataw = val;
 109         parallel_update_irq(s);
 110         break;
 111     case PARA_REG_CTR:
 112         val |= 0xc0;
 113         if ((val & PARA_CTR_INIT) == 0 ) {
 114             s->status = PARA_STS_BUSY;
 115             s->status |= PARA_STS_ACK;
 116             s->status |= PARA_STS_ONLINE;
 117             s->status |= PARA_STS_ERROR;
 118         }
 119         else if (val & PARA_CTR_SELECT) {
 120             if (val & PARA_CTR_STROBE) {
 121                 s->status &= ~PARA_STS_BUSY;
 122                 if ((s->control & PARA_CTR_STROBE) == 0)
 123                     qemu_chr_fe_write(s->chr, &s->dataw, 1);
 124             } else {
 125                 if (s->control & PARA_CTR_INTEN) {
 126                     s->irq_pending = 1;
 127                 }
 128             }
 129         }
 130         parallel_update_irq(s);
 131         s->control = val;
 132         break;
 133     }
 134 }
 135
 136 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
 137 {
 138     ParallelState *s = opaque;
 139     uint8_t parm = val;
 140     int dir;
 141
 142     /* Sometimes programs do several writes for timing purposes on old
 143        HW. Take care not to waste time on writes that do nothing. */
 144
 145     s->last_read_offset = ~0U;
 146
 147     addr &= 7;
 148     switch(addr) {
 149     case PARA_REG_DATA:
 150         if (s->dataw == val)
 151             return;
 152         pdebug("wd%02x\n", val);
 153         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
 154         s->dataw = val;
 155         break;
 156     case PARA_REG_STS:
 157         pdebug("ws%02x\n", val);
 158         if (val & PARA_STS_TMOUT)
 159             s->epp_timeout = 0;
 160         break;
 161     case PARA_REG_CTR:
 162         val |= 0xc0;
 163         if (s->control == val)
 164             return;
 165         pdebug("wc%02x\n", val);
 166
 167         if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
 168             if (val & PARA_CTR_DIR) {
 169                 dir = 1;
 170             } else {
 171                 dir = 0;
 172             }
 173             qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
 174             parm &= ~PARA_CTR_DIR;
 175         }
 176
 177         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
 178         s->control = val;
 179         break;
 180     case PARA_REG_EPP_ADDR:
 181         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 182             /* Controls not correct for EPP address cycle, so do nothing */
 183             pdebug("wa%02x s\n", val);
 184         else {
 185             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 186             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
 187                 s->epp_timeout = 1;
 188                 pdebug("wa%02x t\n", val);
 189             }
 190             else
 191                 pdebug("wa%02x\n", val);
 192         }
 193         break;
 194     case PARA_REG_EPP_DATA:
 195         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
 196             /* Controls not correct for EPP data cycle, so do nothing */
 197             pdebug("we%02x s\n", val);
 198         else {
 199             struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
 200             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
 201                 s->epp_timeout = 1;
 202                 pdebug("we%02x t\n", val);
 203             }
 204             else
 205                 pdebug("we%02x\n", val);
 206         }
 207         break;
 208     }
 209 }
 210
 211 static void
 212 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
 213 {
 214     ParallelState *s = opaque;
 215     uint16_t eppdata = cpu_to_le16(val);
 216     int err;
 217     struct ParallelIOArg ioarg = {
 218         .buffer = &eppdata, .count = sizeof(eppdata)
 219     };
 220     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 221         /* Controls not correct for EPP data cycle, so do nothing */
 222         pdebug("we%04x s\n", val);
 223         return;
 224     }
 225     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 226     if (err) {
 227         s->epp_timeout = 1;
 228         pdebug("we%04x t\n", val);
 229     }
 230     else
 231         pdebug("we%04x\n", val);
 232 }
 233
 234 static void
 235 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
 236 {
 237     ParallelState *s = opaque;
 238     uint32_t eppdata = cpu_to_le32(val);
 239     int err;
 240     struct ParallelIOArg ioarg = {
 241         .buffer = &eppdata, .count = sizeof(eppdata)
 242     };
 243     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
 244         /* Controls not correct for EPP data cycle, so do nothing */
 245         pdebug("we%08x s\n", val);
 246         return;
 247     }
 248     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
 249     if (err) {
 250         s->epp_timeout = 1;
 251         pdebug("we%08x t\n", val);
 252     }
 253     else
 254         pdebug("we%08x\n", val);
 255 }
 256
 257 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
 258 {
 259     ParallelState *s = opaque;
 260     uint32_t ret = 0xff;
 261
 262     addr &= 7;
 263     switch(addr) {
 264     case PARA_REG_DATA:
 265         if (s->control & PARA_CTR_DIR)
 266             ret = s->datar;
 267         else
 268             ret = s->dataw;
 269         break;
 270     case PARA_REG_STS:
 271         ret = s->status;
 272         s->irq_pending = 0;
 273         if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
 274             /* XXX Fixme: wait 5 microseconds */
 275             if (s->status & PARA_STS_ACK)
 276                 s->status &= ~PARA_STS_ACK;
 277             else {
 278                 /* XXX Fixme: wait 5 microseconds */
 279                 s->status |= PARA_STS_ACK;
 280                 s->status |= PARA_STS_BUSY;
 281             }
 282         }
 283         parallel_update_irq(s);
 284         break;
 285     case PARA_REG_CTR:
 286         ret = s->control;
 287         break;
 288     }
 289     pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
 290     return ret;
 291 }
 292
 293 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
 294 {
 295     ParallelState *s = opaque;
 296     uint8_t ret = 0xff;
 297     addr &= 7;
 298     switch(addr) {
 299     case PARA_REG_DATA:
 300         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
 301         if (s->last_read_offset != addr || s->datar != ret)
 302             pdebug("rd%02x\n", ret);
 303         s->datar = ret;
 304         break;
 305     case PARA_REG_STS:
 306         qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
 307         ret &= ~PARA_STS_TMOUT;
 308         if (s->epp_timeout)
 309             ret |= PARA_STS_TMOUT;
 310         if (s->last_read_offset != addr || s->status != ret)
 311             pdebug("rs%02x\n", ret);
 312         s->status = ret;
 313         break;
 314     case PARA_REG_CTR:
 315         /* s->control has some bits fixed to 1. It is zero only when
 316            it has not been yet written to.  */
 317         if (s->control == 0) {
 318             qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
 319             if (s->last_read_offset != addr)
 320                 pdebug("rc%02x\n", ret);
 321             s->control = ret;
 322         }
 323         else {
 324             ret = s->control;
 325             if (s->last_read_offset != addr)
 326                 pdebug("rc%02x\n", ret);
 327         }
 328         break;
 329     case PARA_REG_EPP_ADDR:
 330         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
 331             /* Controls not correct for EPP addr cycle, so do nothing */
 332             pdebug("ra%02x s\n", ret);
 333         else {
 334             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 335             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
 336                 s->epp_timeout = 1;
 337                 pdebug("ra%02x t\n", ret);
 338             }
 339             else
 340                 pdebug("ra%02x\n", ret);
 341         }
 342         break;
 343     case PARA_REG_EPP_DATA:
 344         if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
 345             /* Controls not correct for EPP data cycle, so do nothing */
 346             pdebug("re%02x s\n", ret);
 347         else {
 348             struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
 349             if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
 350                 s->epp_timeout = 1;
 351                 pdebug("re%02x t\n", ret);
 352             }
 353             else
 354                 pdebug("re%02x\n", ret);
 355         }
 356         break;
 357     }
 358     s->last_read_offset = addr;
 359     return ret;
 360 }
 361
 362 static uint32_t
 363 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
 364 {
 365     ParallelState *s = opaque;
 366     uint32_t ret;
 367     uint16_t eppdata = ~0;
 368     int err;
 369     struct ParallelIOArg ioarg = {
 370         .buffer = &eppdata, .count = sizeof(eppdata)
 371     };
 372     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 373         /* Controls not correct for EPP data cycle, so do nothing */
 374         pdebug("re%04x s\n", eppdata);
 375         return eppdata;
 376     }
 377     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 378     ret = le16_to_cpu(eppdata);
 379
 380     if (err) {
 381         s->epp_timeout = 1;
 382         pdebug("re%04x t\n", ret);
 383     }
 384     else
 385         pdebug("re%04x\n", ret);
 386     return ret;
 387 }
 388
 389 static uint32_t
 390 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
 391 {
 392     ParallelState *s = opaque;
 393     uint32_t ret;
 394     uint32_t eppdata = ~0U;
 395     int err;
 396     struct ParallelIOArg ioarg = {
 397         .buffer = &eppdata, .count = sizeof(eppdata)
 398     };
 399     if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
 400         /* Controls not correct for EPP data cycle, so do nothing */
 401         pdebug("re%08x s\n", eppdata);
 402         return eppdata;
 403     }
 404     err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
 405     ret = le32_to_cpu(eppdata);
 406
 407     if (err) {
 408         s->epp_timeout = 1;
 409         pdebug("re%08x t\n", ret);
 410     }
 411     else
 412         pdebug("re%08x\n", ret);
 413     return ret;
 414 }
 415
 416 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
 417 {
 418     pdebug("wecp%d=%02x\n", addr & 7, val);
 419 }
 420
 421 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
 422 {
 423     uint8_t ret = 0xff;
 424
 425     pdebug("recp%d:%02x\n", addr & 7, ret);
 426     return ret;
 427 }
 428
 429 static void parallel_reset(void *opaque)
 430 {
 431     ParallelState *s = opaque;
 432
 433     s->datar = ~0;
 434     s->dataw = ~0;
 435     s->status = PARA_STS_BUSY;
 436     s->status |= PARA_STS_ACK;
 437     s->status |= PARA_STS_ONLINE;
 438     s->status |= PARA_STS_ERROR;
 439     s->status |= PARA_STS_TMOUT;
 440     s->control = PARA_CTR_SELECT;
 441     s->control |= PARA_CTR_INIT;
 442     s->control |= 0xc0;
 443     s->irq_pending = 0;
 444     s->hw_driver = 0;
 445     s->epp_timeout = 0;
 446     s->last_read_offset = ~0U;
 447 }
 448
 449 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
 450
 451 static int parallel_isa_initfn(ISADevice *dev)
 452 {
 453     static int index;
 454     ISAParallelState *isa = DO_UPCAST(ISAParallelState, dev, dev);
 455     ParallelState *s = &isa->state;
 456     int base;
 457     uint8_t dummy;
 458
 459     if (!s->chr) {
 460         fprintf(stderr, "Can't create parallel device, empty char device\n");
 461         exit(1);
 462     }
 463
 464     if (isa->index == -1)
 465         isa->index = index;
 466     if (isa->index >= MAX_PARALLEL_PORTS)
 467         return -1;
 468     if (isa->iobase == -1)
 469         isa->iobase = isa_parallel_io[isa->index];
 470     index++;
 471
 472     base = isa->iobase;
 473     isa_init_irq(dev, &s->irq, isa->isairq);
 474     qemu_register_reset(parallel_reset, s);
 475
 476     if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
 477         s->hw_driver = 1;
 478         s->status = dummy;
 479     }
 480
 481     if (s->hw_driver) {
 482         register_ioport_write(base, 8, 1, parallel_ioport_write_hw, s);
 483         register_ioport_read(base, 8, 1, parallel_ioport_read_hw, s);
 484         isa_init_ioport_range(dev, base, 8);
 485
 486         register_ioport_write(base+4, 1, 2, parallel_ioport_eppdata_write_hw2, s);
 487         register_ioport_read(base+4, 1, 2, parallel_ioport_eppdata_read_hw2, s);
 488         register_ioport_write(base+4, 1, 4, parallel_ioport_eppdata_write_hw4, s);
 489         register_ioport_read(base+4, 1, 4, parallel_ioport_eppdata_read_hw4, s);
 490         isa_init_ioport(dev, base+4);
 491         register_ioport_write(base+0x400, 8, 1, parallel_ioport_ecp_write, s);
 492         register_ioport_read(base+0x400, 8, 1, parallel_ioport_ecp_read, s);
 493         isa_init_ioport_range(dev, base+0x400, 8);
 494     }
 495     else {
 496         register_ioport_write(base, 8, 1, parallel_ioport_write_sw, s);
 497         register_ioport_read(base, 8, 1, parallel_ioport_read_sw, s);
 498         isa_init_ioport_range(dev, base, 8);
 499     }
 500     return 0;
 501 }
 502
 503 /* Memory mapped interface */
 504 static uint32_t parallel_mm_readb (void *opaque, target_phys_addr_t addr)
 505 {
 506     ParallelState *s = opaque;
 507
 508     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
 509 }
 510
 511 static void parallel_mm_writeb (void *opaque,
 512                                 target_phys_addr_t addr, uint32_t value)
 513 {
 514     ParallelState *s = opaque;
 515
 516     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
 517 }
 518
 519 static uint32_t parallel_mm_readw (void *opaque, target_phys_addr_t addr)
 520 {
 521     ParallelState *s = opaque;
 522
 523     return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
 524 }
 525
 526 static void parallel_mm_writew (void *opaque,
 527                                 target_phys_addr_t addr, uint32_t value)
 528 {
 529     ParallelState *s = opaque;
 530
 531     parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
 532 }
 533
 534 static uint32_t parallel_mm_readl (void *opaque, target_phys_addr_t addr)
 535 {
 536     ParallelState *s = opaque;
 537
 538     return parallel_ioport_read_sw(s, addr >> s->it_shift);
 539 }
 540
 541 static void parallel_mm_writel (void *opaque,
 542                                 target_phys_addr_t addr, uint32_t value)
 543 {
 544     ParallelState *s = opaque;
 545
 546     parallel_ioport_write_sw(s, addr >> s->it_shift, value);
 547 }
 548
 549 static CPUReadMemoryFunc * const parallel_mm_read_sw[] = {
 550     &parallel_mm_readb,
 551     &parallel_mm_readw,
 552     &parallel_mm_readl,
 553 };
 554
 555 static CPUWriteMemoryFunc * const parallel_mm_write_sw[] = {
 556     &parallel_mm_writeb,
 557     &parallel_mm_writew,
 558     &parallel_mm_writel,
 559 };
 560
 561 /* If fd is zero, it means that the parallel device uses the console */
 562 bool parallel_mm_init(target_phys_addr_t base, int it_shift, qemu_irq irq,
 563                       CharDriverState *chr)
 564 {
 565     ParallelState *s;
 566     int io_sw;
 567
 568     s = g_malloc0(sizeof(ParallelState));
 569     s->irq = irq;
 570     s->chr = chr;
 571     s->it_shift = it_shift;
 572     qemu_register_reset(parallel_reset, s);
 573
 574     io_sw = cpu_register_io_memory(parallel_mm_read_sw, parallel_mm_write_sw,
 575                                    s, DEVICE_NATIVE_ENDIAN);
 576     cpu_register_physical_memory(base, 8 << it_shift, io_sw);
 577     return true;
 578 }
 579
 580 static ISADeviceInfo parallel_isa_info = {
 581     .qdev.name  = "isa-parallel",
 582     .qdev.size  = sizeof(ISAParallelState),
 583     .init       = parallel_isa_initfn,
 584     .qdev.props = (Property[]) {
 585         DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1),
 586         DEFINE_PROP_HEX32("iobase", ISAParallelState, iobase,  -1),
 587         DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7),
 588         DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr),
 589         DEFINE_PROP_END_OF_LIST(),
 590     },
 591 };
 592
 593 static void parallel_register_devices(void)
 594 {
 595     isa_qdev_register(&parallel_isa_info);
 596 }
 597
 598 device_init(parallel_register_devices)