2 * QEMU RISC-V Board Compatible with SiFive Freedom U SDK
4 * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
5 * Copyright (c) 2017 SiFive, Inc.
6 * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
8 * Provides a board compatible with the SiFive Freedom U SDK:
11 * 1) CLINT (Core Level Interruptor)
12 * 2) PLIC (Platform Level Interrupt Controller)
13 * 3) PRCI (Power, Reset, Clock, Interrupt)
14 * 4) GPIO (General Purpose Input/Output Controller)
15 * 5) OTP (One-Time Programmable) memory with stored serial number
16 * 6) GEM (Gigabit Ethernet Controller) and management block
17 * 7) DMA (Direct Memory Access Controller)
18 * 8) SPI0 connected to an SPI flash
19 * 9) SPI2 connected to an SD card
22 * This board currently generates devicetree dynamically that indicates at least
23 * two harts and up to five harts.
25 * This program is free software; you can redistribute it and/or modify it
26 * under the terms and conditions of the GNU General Public License,
27 * version 2 or later, as published by the Free Software Foundation.
29 * This program is distributed in the hope it will be useful, but WITHOUT
30 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
31 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
34 * You should have received a copy of the GNU General Public License along with
35 * this program. If not, see <http://www.gnu.org/licenses/>.
38 #include "qemu/osdep.h"
39 #include "qemu/error-report.h"
40 #include "qapi/error.h"
41 #include "qapi/visitor.h"
42 #include "hw/boards.h"
44 #include "hw/loader.h"
45 #include "hw/sysbus.h"
46 #include "hw/char/serial.h"
47 #include "hw/cpu/cluster.h"
48 #include "hw/misc/unimp.h"
50 #include "hw/ssi/ssi.h"
51 #include "target/riscv/cpu.h"
52 #include "hw/riscv/riscv_hart.h"
53 #include "hw/riscv/sifive_u.h"
54 #include "hw/riscv/boot.h"
55 #include "hw/char/sifive_uart.h"
56 #include "hw/intc/riscv_aclint.h"
57 #include "hw/intc/sifive_plic.h"
58 #include "chardev/char.h"
60 #include "sysemu/device_tree.h"
61 #include "sysemu/runstate.h"
62 #include "sysemu/sysemu.h"
66 /* CLINT timebase frequency */
67 #define CLINT_TIMEBASE_FREQ 1000000
69 static const MemMapEntry sifive_u_memmap
[] = {
70 [SIFIVE_U_DEV_DEBUG
] = { 0x0, 0x100 },
71 [SIFIVE_U_DEV_MROM
] = { 0x1000, 0xf000 },
72 [SIFIVE_U_DEV_CLINT
] = { 0x2000000, 0x10000 },
73 [SIFIVE_U_DEV_L2CC
] = { 0x2010000, 0x1000 },
74 [SIFIVE_U_DEV_PDMA
] = { 0x3000000, 0x100000 },
75 [SIFIVE_U_DEV_L2LIM
] = { 0x8000000, 0x2000000 },
76 [SIFIVE_U_DEV_PLIC
] = { 0xc000000, 0x4000000 },
77 [SIFIVE_U_DEV_PRCI
] = { 0x10000000, 0x1000 },
78 [SIFIVE_U_DEV_UART0
] = { 0x10010000, 0x1000 },
79 [SIFIVE_U_DEV_UART1
] = { 0x10011000, 0x1000 },
80 [SIFIVE_U_DEV_PWM0
] = { 0x10020000, 0x1000 },
81 [SIFIVE_U_DEV_PWM1
] = { 0x10021000, 0x1000 },
82 [SIFIVE_U_DEV_QSPI0
] = { 0x10040000, 0x1000 },
83 [SIFIVE_U_DEV_QSPI2
] = { 0x10050000, 0x1000 },
84 [SIFIVE_U_DEV_GPIO
] = { 0x10060000, 0x1000 },
85 [SIFIVE_U_DEV_OTP
] = { 0x10070000, 0x1000 },
86 [SIFIVE_U_DEV_GEM
] = { 0x10090000, 0x2000 },
87 [SIFIVE_U_DEV_GEM_MGMT
] = { 0x100a0000, 0x1000 },
88 [SIFIVE_U_DEV_DMC
] = { 0x100b0000, 0x10000 },
89 [SIFIVE_U_DEV_FLASH0
] = { 0x20000000, 0x10000000 },
90 [SIFIVE_U_DEV_DRAM
] = { 0x80000000, 0x0 },
94 #define GEM_REVISION 0x10070109
96 static void create_fdt(SiFiveUState
*s
, const MemMapEntry
*memmap
,
97 uint64_t mem_size
, const char *cmdline
, bool is_32_bit
)
99 MachineState
*ms
= MACHINE(qdev_get_machine());
104 uint32_t plic_phandle
, prci_phandle
, gpio_phandle
, phandle
= 1;
105 uint32_t hfclk_phandle
, rtcclk_phandle
, phy_phandle
;
106 static const char * const ethclk_names
[2] = { "pclk", "hclk" };
107 static const char * const clint_compat
[2] = {
108 "sifive,clint0", "riscv,clint0"
110 static const char * const plic_compat
[2] = {
111 "sifive,plic-1.0.0", "riscv,plic0"
115 fdt
= s
->fdt
= load_device_tree(ms
->dtb
, &s
->fdt_size
);
117 error_report("load_device_tree() failed");
120 goto update_bootargs
;
122 fdt
= s
->fdt
= create_device_tree(&s
->fdt_size
);
124 error_report("create_device_tree() failed");
129 qemu_fdt_setprop_string(fdt
, "/", "model", "SiFive HiFive Unleashed A00");
130 qemu_fdt_setprop_string(fdt
, "/", "compatible",
131 "sifive,hifive-unleashed-a00");
132 qemu_fdt_setprop_cell(fdt
, "/", "#size-cells", 0x2);
133 qemu_fdt_setprop_cell(fdt
, "/", "#address-cells", 0x2);
135 qemu_fdt_add_subnode(fdt
, "/soc");
136 qemu_fdt_setprop(fdt
, "/soc", "ranges", NULL
, 0);
137 qemu_fdt_setprop_string(fdt
, "/soc", "compatible", "simple-bus");
138 qemu_fdt_setprop_cell(fdt
, "/soc", "#size-cells", 0x2);
139 qemu_fdt_setprop_cell(fdt
, "/soc", "#address-cells", 0x2);
141 hfclk_phandle
= phandle
++;
142 nodename
= g_strdup_printf("/hfclk");
143 qemu_fdt_add_subnode(fdt
, nodename
);
144 qemu_fdt_setprop_cell(fdt
, nodename
, "phandle", hfclk_phandle
);
145 qemu_fdt_setprop_string(fdt
, nodename
, "clock-output-names", "hfclk");
146 qemu_fdt_setprop_cell(fdt
, nodename
, "clock-frequency",
147 SIFIVE_U_HFCLK_FREQ
);
148 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "fixed-clock");
149 qemu_fdt_setprop_cell(fdt
, nodename
, "#clock-cells", 0x0);
152 rtcclk_phandle
= phandle
++;
153 nodename
= g_strdup_printf("/rtcclk");
154 qemu_fdt_add_subnode(fdt
, nodename
);
155 qemu_fdt_setprop_cell(fdt
, nodename
, "phandle", rtcclk_phandle
);
156 qemu_fdt_setprop_string(fdt
, nodename
, "clock-output-names", "rtcclk");
157 qemu_fdt_setprop_cell(fdt
, nodename
, "clock-frequency",
158 SIFIVE_U_RTCCLK_FREQ
);
159 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "fixed-clock");
160 qemu_fdt_setprop_cell(fdt
, nodename
, "#clock-cells", 0x0);
163 nodename
= g_strdup_printf("/memory@%lx",
164 (long)memmap
[SIFIVE_U_DEV_DRAM
].base
);
165 qemu_fdt_add_subnode(fdt
, nodename
);
166 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
167 memmap
[SIFIVE_U_DEV_DRAM
].base
>> 32, memmap
[SIFIVE_U_DEV_DRAM
].base
,
168 mem_size
>> 32, mem_size
);
169 qemu_fdt_setprop_string(fdt
, nodename
, "device_type", "memory");
172 qemu_fdt_add_subnode(fdt
, "/cpus");
173 qemu_fdt_setprop_cell(fdt
, "/cpus", "timebase-frequency",
174 CLINT_TIMEBASE_FREQ
);
175 qemu_fdt_setprop_cell(fdt
, "/cpus", "#size-cells", 0x0);
176 qemu_fdt_setprop_cell(fdt
, "/cpus", "#address-cells", 0x1);
178 for (cpu
= ms
->smp
.cpus
- 1; cpu
>= 0; cpu
--) {
179 int cpu_phandle
= phandle
++;
180 nodename
= g_strdup_printf("/cpus/cpu@%d", cpu
);
181 char *intc
= g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu
);
183 qemu_fdt_add_subnode(fdt
, nodename
);
184 /* cpu 0 is the management hart that does not have mmu */
187 qemu_fdt_setprop_string(fdt
, nodename
, "mmu-type", "riscv,sv32");
189 qemu_fdt_setprop_string(fdt
, nodename
, "mmu-type", "riscv,sv48");
191 isa
= riscv_isa_string(&s
->soc
.u_cpus
.harts
[cpu
- 1]);
193 isa
= riscv_isa_string(&s
->soc
.e_cpus
.harts
[0]);
195 qemu_fdt_setprop_string(fdt
, nodename
, "riscv,isa", isa
);
196 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "riscv");
197 qemu_fdt_setprop_string(fdt
, nodename
, "status", "okay");
198 qemu_fdt_setprop_cell(fdt
, nodename
, "reg", cpu
);
199 qemu_fdt_setprop_string(fdt
, nodename
, "device_type", "cpu");
200 qemu_fdt_add_subnode(fdt
, intc
);
201 qemu_fdt_setprop_cell(fdt
, intc
, "phandle", cpu_phandle
);
202 qemu_fdt_setprop_string(fdt
, intc
, "compatible", "riscv,cpu-intc");
203 qemu_fdt_setprop(fdt
, intc
, "interrupt-controller", NULL
, 0);
204 qemu_fdt_setprop_cell(fdt
, intc
, "#interrupt-cells", 1);
210 cells
= g_new0(uint32_t, ms
->smp
.cpus
* 4);
211 for (cpu
= 0; cpu
< ms
->smp
.cpus
; cpu
++) {
213 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu
);
214 uint32_t intc_phandle
= qemu_fdt_get_phandle(fdt
, nodename
);
215 cells
[cpu
* 4 + 0] = cpu_to_be32(intc_phandle
);
216 cells
[cpu
* 4 + 1] = cpu_to_be32(IRQ_M_SOFT
);
217 cells
[cpu
* 4 + 2] = cpu_to_be32(intc_phandle
);
218 cells
[cpu
* 4 + 3] = cpu_to_be32(IRQ_M_TIMER
);
221 nodename
= g_strdup_printf("/soc/clint@%lx",
222 (long)memmap
[SIFIVE_U_DEV_CLINT
].base
);
223 qemu_fdt_add_subnode(fdt
, nodename
);
224 qemu_fdt_setprop_string_array(fdt
, nodename
, "compatible",
225 (char **)&clint_compat
, ARRAY_SIZE(clint_compat
));
226 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
227 0x0, memmap
[SIFIVE_U_DEV_CLINT
].base
,
228 0x0, memmap
[SIFIVE_U_DEV_CLINT
].size
);
229 qemu_fdt_setprop(fdt
, nodename
, "interrupts-extended",
230 cells
, ms
->smp
.cpus
* sizeof(uint32_t) * 4);
234 nodename
= g_strdup_printf("/soc/otp@%lx",
235 (long)memmap
[SIFIVE_U_DEV_OTP
].base
);
236 qemu_fdt_add_subnode(fdt
, nodename
);
237 qemu_fdt_setprop_cell(fdt
, nodename
, "fuse-count", SIFIVE_U_OTP_REG_SIZE
);
238 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
239 0x0, memmap
[SIFIVE_U_DEV_OTP
].base
,
240 0x0, memmap
[SIFIVE_U_DEV_OTP
].size
);
241 qemu_fdt_setprop_string(fdt
, nodename
, "compatible",
242 "sifive,fu540-c000-otp");
245 prci_phandle
= phandle
++;
246 nodename
= g_strdup_printf("/soc/clock-controller@%lx",
247 (long)memmap
[SIFIVE_U_DEV_PRCI
].base
);
248 qemu_fdt_add_subnode(fdt
, nodename
);
249 qemu_fdt_setprop_cell(fdt
, nodename
, "phandle", prci_phandle
);
250 qemu_fdt_setprop_cell(fdt
, nodename
, "#clock-cells", 0x1);
251 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
252 hfclk_phandle
, rtcclk_phandle
);
253 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
254 0x0, memmap
[SIFIVE_U_DEV_PRCI
].base
,
255 0x0, memmap
[SIFIVE_U_DEV_PRCI
].size
);
256 qemu_fdt_setprop_string(fdt
, nodename
, "compatible",
257 "sifive,fu540-c000-prci");
260 plic_phandle
= phandle
++;
261 cells
= g_new0(uint32_t, ms
->smp
.cpus
* 4 - 2);
262 for (cpu
= 0; cpu
< ms
->smp
.cpus
; cpu
++) {
264 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu
);
265 uint32_t intc_phandle
= qemu_fdt_get_phandle(fdt
, nodename
);
266 /* cpu 0 is the management hart that does not have S-mode */
268 cells
[0] = cpu_to_be32(intc_phandle
);
269 cells
[1] = cpu_to_be32(IRQ_M_EXT
);
271 cells
[cpu
* 4 - 2] = cpu_to_be32(intc_phandle
);
272 cells
[cpu
* 4 - 1] = cpu_to_be32(IRQ_M_EXT
);
273 cells
[cpu
* 4 + 0] = cpu_to_be32(intc_phandle
);
274 cells
[cpu
* 4 + 1] = cpu_to_be32(IRQ_S_EXT
);
278 nodename
= g_strdup_printf("/soc/interrupt-controller@%lx",
279 (long)memmap
[SIFIVE_U_DEV_PLIC
].base
);
280 qemu_fdt_add_subnode(fdt
, nodename
);
281 qemu_fdt_setprop_cell(fdt
, nodename
, "#interrupt-cells", 1);
282 qemu_fdt_setprop_string_array(fdt
, nodename
, "compatible",
283 (char **)&plic_compat
, ARRAY_SIZE(plic_compat
));
284 qemu_fdt_setprop(fdt
, nodename
, "interrupt-controller", NULL
, 0);
285 qemu_fdt_setprop(fdt
, nodename
, "interrupts-extended",
286 cells
, (ms
->smp
.cpus
* 4 - 2) * sizeof(uint32_t));
287 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
288 0x0, memmap
[SIFIVE_U_DEV_PLIC
].base
,
289 0x0, memmap
[SIFIVE_U_DEV_PLIC
].size
);
290 qemu_fdt_setprop_cell(fdt
, nodename
, "riscv,ndev", 0x35);
291 qemu_fdt_setprop_cell(fdt
, nodename
, "phandle", plic_phandle
);
292 plic_phandle
= qemu_fdt_get_phandle(fdt
, nodename
);
296 gpio_phandle
= phandle
++;
297 nodename
= g_strdup_printf("/soc/gpio@%lx",
298 (long)memmap
[SIFIVE_U_DEV_GPIO
].base
);
299 qemu_fdt_add_subnode(fdt
, nodename
);
300 qemu_fdt_setprop_cell(fdt
, nodename
, "phandle", gpio_phandle
);
301 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
302 prci_phandle
, PRCI_CLK_TLCLK
);
303 qemu_fdt_setprop_cell(fdt
, nodename
, "#interrupt-cells", 2);
304 qemu_fdt_setprop(fdt
, nodename
, "interrupt-controller", NULL
, 0);
305 qemu_fdt_setprop_cell(fdt
, nodename
, "#gpio-cells", 2);
306 qemu_fdt_setprop(fdt
, nodename
, "gpio-controller", NULL
, 0);
307 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
308 0x0, memmap
[SIFIVE_U_DEV_GPIO
].base
,
309 0x0, memmap
[SIFIVE_U_DEV_GPIO
].size
);
310 qemu_fdt_setprop_cells(fdt
, nodename
, "interrupts", SIFIVE_U_GPIO_IRQ0
,
311 SIFIVE_U_GPIO_IRQ1
, SIFIVE_U_GPIO_IRQ2
, SIFIVE_U_GPIO_IRQ3
,
312 SIFIVE_U_GPIO_IRQ4
, SIFIVE_U_GPIO_IRQ5
, SIFIVE_U_GPIO_IRQ6
,
313 SIFIVE_U_GPIO_IRQ7
, SIFIVE_U_GPIO_IRQ8
, SIFIVE_U_GPIO_IRQ9
,
314 SIFIVE_U_GPIO_IRQ10
, SIFIVE_U_GPIO_IRQ11
, SIFIVE_U_GPIO_IRQ12
,
315 SIFIVE_U_GPIO_IRQ13
, SIFIVE_U_GPIO_IRQ14
, SIFIVE_U_GPIO_IRQ15
);
316 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
317 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "sifive,gpio0");
320 nodename
= g_strdup_printf("/gpio-restart");
321 qemu_fdt_add_subnode(fdt
, nodename
);
322 qemu_fdt_setprop_cells(fdt
, nodename
, "gpios", gpio_phandle
, 10, 1);
323 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "gpio-restart");
326 nodename
= g_strdup_printf("/soc/dma@%lx",
327 (long)memmap
[SIFIVE_U_DEV_PDMA
].base
);
328 qemu_fdt_add_subnode(fdt
, nodename
);
329 qemu_fdt_setprop_cell(fdt
, nodename
, "#dma-cells", 1);
330 qemu_fdt_setprop_cells(fdt
, nodename
, "interrupts",
331 SIFIVE_U_PDMA_IRQ0
, SIFIVE_U_PDMA_IRQ1
, SIFIVE_U_PDMA_IRQ2
,
332 SIFIVE_U_PDMA_IRQ3
, SIFIVE_U_PDMA_IRQ4
, SIFIVE_U_PDMA_IRQ5
,
333 SIFIVE_U_PDMA_IRQ6
, SIFIVE_U_PDMA_IRQ7
);
334 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
335 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
336 0x0, memmap
[SIFIVE_U_DEV_PDMA
].base
,
337 0x0, memmap
[SIFIVE_U_DEV_PDMA
].size
);
338 qemu_fdt_setprop_string(fdt
, nodename
, "compatible",
339 "sifive,fu540-c000-pdma");
342 nodename
= g_strdup_printf("/soc/cache-controller@%lx",
343 (long)memmap
[SIFIVE_U_DEV_L2CC
].base
);
344 qemu_fdt_add_subnode(fdt
, nodename
);
345 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
346 0x0, memmap
[SIFIVE_U_DEV_L2CC
].base
,
347 0x0, memmap
[SIFIVE_U_DEV_L2CC
].size
);
348 qemu_fdt_setprop_cells(fdt
, nodename
, "interrupts",
349 SIFIVE_U_L2CC_IRQ0
, SIFIVE_U_L2CC_IRQ1
, SIFIVE_U_L2CC_IRQ2
);
350 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
351 qemu_fdt_setprop(fdt
, nodename
, "cache-unified", NULL
, 0);
352 qemu_fdt_setprop_cell(fdt
, nodename
, "cache-size", 2097152);
353 qemu_fdt_setprop_cell(fdt
, nodename
, "cache-sets", 1024);
354 qemu_fdt_setprop_cell(fdt
, nodename
, "cache-level", 2);
355 qemu_fdt_setprop_cell(fdt
, nodename
, "cache-block-size", 64);
356 qemu_fdt_setprop_string(fdt
, nodename
, "compatible",
357 "sifive,fu540-c000-ccache");
360 nodename
= g_strdup_printf("/soc/spi@%lx",
361 (long)memmap
[SIFIVE_U_DEV_QSPI2
].base
);
362 qemu_fdt_add_subnode(fdt
, nodename
);
363 qemu_fdt_setprop_cell(fdt
, nodename
, "#size-cells", 0);
364 qemu_fdt_setprop_cell(fdt
, nodename
, "#address-cells", 1);
365 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
366 prci_phandle
, PRCI_CLK_TLCLK
);
367 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupts", SIFIVE_U_QSPI2_IRQ
);
368 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
369 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
370 0x0, memmap
[SIFIVE_U_DEV_QSPI2
].base
,
371 0x0, memmap
[SIFIVE_U_DEV_QSPI2
].size
);
372 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "sifive,spi0");
375 nodename
= g_strdup_printf("/soc/spi@%lx/mmc@0",
376 (long)memmap
[SIFIVE_U_DEV_QSPI2
].base
);
377 qemu_fdt_add_subnode(fdt
, nodename
);
378 qemu_fdt_setprop(fdt
, nodename
, "disable-wp", NULL
, 0);
379 qemu_fdt_setprop_cells(fdt
, nodename
, "voltage-ranges", 3300, 3300);
380 qemu_fdt_setprop_cell(fdt
, nodename
, "spi-max-frequency", 20000000);
381 qemu_fdt_setprop_cell(fdt
, nodename
, "reg", 0);
382 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "mmc-spi-slot");
385 nodename
= g_strdup_printf("/soc/spi@%lx",
386 (long)memmap
[SIFIVE_U_DEV_QSPI0
].base
);
387 qemu_fdt_add_subnode(fdt
, nodename
);
388 qemu_fdt_setprop_cell(fdt
, nodename
, "#size-cells", 0);
389 qemu_fdt_setprop_cell(fdt
, nodename
, "#address-cells", 1);
390 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
391 prci_phandle
, PRCI_CLK_TLCLK
);
392 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupts", SIFIVE_U_QSPI0_IRQ
);
393 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
394 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
395 0x0, memmap
[SIFIVE_U_DEV_QSPI0
].base
,
396 0x0, memmap
[SIFIVE_U_DEV_QSPI0
].size
);
397 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "sifive,spi0");
400 nodename
= g_strdup_printf("/soc/spi@%lx/flash@0",
401 (long)memmap
[SIFIVE_U_DEV_QSPI0
].base
);
402 qemu_fdt_add_subnode(fdt
, nodename
);
403 qemu_fdt_setprop_cell(fdt
, nodename
, "spi-rx-bus-width", 4);
404 qemu_fdt_setprop_cell(fdt
, nodename
, "spi-tx-bus-width", 4);
405 qemu_fdt_setprop(fdt
, nodename
, "m25p,fast-read", NULL
, 0);
406 qemu_fdt_setprop_cell(fdt
, nodename
, "spi-max-frequency", 50000000);
407 qemu_fdt_setprop_cell(fdt
, nodename
, "reg", 0);
408 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "jedec,spi-nor");
411 phy_phandle
= phandle
++;
412 nodename
= g_strdup_printf("/soc/ethernet@%lx",
413 (long)memmap
[SIFIVE_U_DEV_GEM
].base
);
414 qemu_fdt_add_subnode(fdt
, nodename
);
415 qemu_fdt_setprop_string(fdt
, nodename
, "compatible",
416 "sifive,fu540-c000-gem");
417 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
418 0x0, memmap
[SIFIVE_U_DEV_GEM
].base
,
419 0x0, memmap
[SIFIVE_U_DEV_GEM
].size
,
420 0x0, memmap
[SIFIVE_U_DEV_GEM_MGMT
].base
,
421 0x0, memmap
[SIFIVE_U_DEV_GEM_MGMT
].size
);
422 qemu_fdt_setprop_string(fdt
, nodename
, "reg-names", "control");
423 qemu_fdt_setprop_string(fdt
, nodename
, "phy-mode", "gmii");
424 qemu_fdt_setprop_cell(fdt
, nodename
, "phy-handle", phy_phandle
);
425 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
426 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupts", SIFIVE_U_GEM_IRQ
);
427 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
428 prci_phandle
, PRCI_CLK_GEMGXLPLL
, prci_phandle
, PRCI_CLK_GEMGXLPLL
);
429 qemu_fdt_setprop_string_array(fdt
, nodename
, "clock-names",
430 (char **)ðclk_names
, ARRAY_SIZE(ethclk_names
));
431 qemu_fdt_setprop(fdt
, nodename
, "local-mac-address",
432 s
->soc
.gem
.conf
.macaddr
.a
, ETH_ALEN
);
433 qemu_fdt_setprop_cell(fdt
, nodename
, "#address-cells", 1);
434 qemu_fdt_setprop_cell(fdt
, nodename
, "#size-cells", 0);
436 qemu_fdt_add_subnode(fdt
, "/aliases");
437 qemu_fdt_setprop_string(fdt
, "/aliases", "ethernet0", nodename
);
441 nodename
= g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
442 (long)memmap
[SIFIVE_U_DEV_GEM
].base
);
443 qemu_fdt_add_subnode(fdt
, nodename
);
444 qemu_fdt_setprop_cell(fdt
, nodename
, "phandle", phy_phandle
);
445 qemu_fdt_setprop_cell(fdt
, nodename
, "reg", 0x0);
448 nodename
= g_strdup_printf("/soc/pwm@%lx",
449 (long)memmap
[SIFIVE_U_DEV_PWM0
].base
);
450 qemu_fdt_add_subnode(fdt
, nodename
);
451 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "sifive,pwm0");
452 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
453 0x0, memmap
[SIFIVE_U_DEV_PWM0
].base
,
454 0x0, memmap
[SIFIVE_U_DEV_PWM0
].size
);
455 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
456 qemu_fdt_setprop_cells(fdt
, nodename
, "interrupts",
457 SIFIVE_U_PWM0_IRQ0
, SIFIVE_U_PWM0_IRQ1
,
458 SIFIVE_U_PWM0_IRQ2
, SIFIVE_U_PWM0_IRQ3
);
459 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
460 prci_phandle
, PRCI_CLK_TLCLK
);
461 qemu_fdt_setprop_cell(fdt
, nodename
, "#pwm-cells", 0);
464 nodename
= g_strdup_printf("/soc/pwm@%lx",
465 (long)memmap
[SIFIVE_U_DEV_PWM1
].base
);
466 qemu_fdt_add_subnode(fdt
, nodename
);
467 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "sifive,pwm0");
468 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
469 0x0, memmap
[SIFIVE_U_DEV_PWM1
].base
,
470 0x0, memmap
[SIFIVE_U_DEV_PWM1
].size
);
471 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
472 qemu_fdt_setprop_cells(fdt
, nodename
, "interrupts",
473 SIFIVE_U_PWM1_IRQ0
, SIFIVE_U_PWM1_IRQ1
,
474 SIFIVE_U_PWM1_IRQ2
, SIFIVE_U_PWM1_IRQ3
);
475 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
476 prci_phandle
, PRCI_CLK_TLCLK
);
477 qemu_fdt_setprop_cell(fdt
, nodename
, "#pwm-cells", 0);
480 nodename
= g_strdup_printf("/soc/serial@%lx",
481 (long)memmap
[SIFIVE_U_DEV_UART1
].base
);
482 qemu_fdt_add_subnode(fdt
, nodename
);
483 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "sifive,uart0");
484 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
485 0x0, memmap
[SIFIVE_U_DEV_UART1
].base
,
486 0x0, memmap
[SIFIVE_U_DEV_UART1
].size
);
487 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
488 prci_phandle
, PRCI_CLK_TLCLK
);
489 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
490 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupts", SIFIVE_U_UART1_IRQ
);
492 qemu_fdt_setprop_string(fdt
, "/aliases", "serial1", nodename
);
495 nodename
= g_strdup_printf("/soc/serial@%lx",
496 (long)memmap
[SIFIVE_U_DEV_UART0
].base
);
497 qemu_fdt_add_subnode(fdt
, nodename
);
498 qemu_fdt_setprop_string(fdt
, nodename
, "compatible", "sifive,uart0");
499 qemu_fdt_setprop_cells(fdt
, nodename
, "reg",
500 0x0, memmap
[SIFIVE_U_DEV_UART0
].base
,
501 0x0, memmap
[SIFIVE_U_DEV_UART0
].size
);
502 qemu_fdt_setprop_cells(fdt
, nodename
, "clocks",
503 prci_phandle
, PRCI_CLK_TLCLK
);
504 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupt-parent", plic_phandle
);
505 qemu_fdt_setprop_cell(fdt
, nodename
, "interrupts", SIFIVE_U_UART0_IRQ
);
507 qemu_fdt_add_subnode(fdt
, "/chosen");
508 qemu_fdt_setprop_string(fdt
, "/chosen", "stdout-path", nodename
);
509 qemu_fdt_setprop_string(fdt
, "/aliases", "serial0", nodename
);
514 if (cmdline
&& *cmdline
) {
515 qemu_fdt_setprop_string(fdt
, "/chosen", "bootargs", cmdline
);
519 static void sifive_u_machine_reset(void *opaque
, int n
, int level
)
521 /* gpio pin active low triggers reset */
523 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET
);
527 static void sifive_u_machine_init(MachineState
*machine
)
529 const MemMapEntry
*memmap
= sifive_u_memmap
;
530 SiFiveUState
*s
= RISCV_U_MACHINE(machine
);
531 MemoryRegion
*system_memory
= get_system_memory();
532 MemoryRegion
*flash0
= g_new(MemoryRegion
, 1);
533 target_ulong start_addr
= memmap
[SIFIVE_U_DEV_DRAM
].base
;
534 target_ulong firmware_end_addr
, kernel_start_addr
;
535 uint32_t start_addr_hi32
= 0x00000000;
537 uint32_t fdt_load_addr
;
538 uint64_t kernel_entry
;
541 DeviceState
*flash_dev
, *sd_dev
, *card_dev
;
542 qemu_irq flash_cs
, sd_cs
;
545 object_initialize_child(OBJECT(machine
), "soc", &s
->soc
, TYPE_RISCV_U_SOC
);
546 object_property_set_uint(OBJECT(&s
->soc
), "serial", s
->serial
,
548 object_property_set_str(OBJECT(&s
->soc
), "cpu-type", machine
->cpu_type
,
550 qdev_realize(DEVICE(&s
->soc
), NULL
, &error_fatal
);
553 memory_region_add_subregion(system_memory
, memmap
[SIFIVE_U_DEV_DRAM
].base
,
556 /* register QSPI0 Flash */
557 memory_region_init_ram(flash0
, NULL
, "riscv.sifive.u.flash0",
558 memmap
[SIFIVE_U_DEV_FLASH0
].size
, &error_fatal
);
559 memory_region_add_subregion(system_memory
, memmap
[SIFIVE_U_DEV_FLASH0
].base
,
562 /* register gpio-restart */
563 qdev_connect_gpio_out(DEVICE(&(s
->soc
.gpio
)), 10,
564 qemu_allocate_irq(sifive_u_machine_reset
, NULL
, 0));
566 /* create device tree */
567 create_fdt(s
, memmap
, machine
->ram_size
, machine
->kernel_cmdline
,
568 riscv_is_32bit(&s
->soc
.u_cpus
));
570 if (s
->start_in_flash
) {
572 * If start_in_flash property is given, assign s->msel to a value
573 * that representing booting from QSPI0 memory-mapped flash.
575 * This also means that when both start_in_flash and msel properties
576 * are given, start_in_flash takes the precedence over msel.
578 * Note this is to keep backward compatibility not to break existing
579 * users that use start_in_flash property.
581 s
->msel
= MSEL_MEMMAP_QSPI0_FLASH
;
585 case MSEL_MEMMAP_QSPI0_FLASH
:
586 start_addr
= memmap
[SIFIVE_U_DEV_FLASH0
].base
;
588 case MSEL_L2LIM_QSPI0_FLASH
:
589 case MSEL_L2LIM_QSPI2_SD
:
590 start_addr
= memmap
[SIFIVE_U_DEV_L2LIM
].base
;
593 start_addr
= memmap
[SIFIVE_U_DEV_DRAM
].base
;
597 if (riscv_is_32bit(&s
->soc
.u_cpus
)) {
598 firmware_end_addr
= riscv_find_and_load_firmware(machine
,
599 RISCV32_BIOS_BIN
, start_addr
, NULL
);
601 firmware_end_addr
= riscv_find_and_load_firmware(machine
,
602 RISCV64_BIOS_BIN
, start_addr
, NULL
);
605 if (machine
->kernel_filename
) {
606 kernel_start_addr
= riscv_calc_kernel_start_addr(&s
->soc
.u_cpus
,
609 kernel_entry
= riscv_load_kernel(machine
->kernel_filename
,
610 kernel_start_addr
, NULL
);
612 if (machine
->initrd_filename
) {
614 hwaddr end
= riscv_load_initrd(machine
->initrd_filename
,
615 machine
->ram_size
, kernel_entry
,
617 qemu_fdt_setprop_cell(s
->fdt
, "/chosen",
618 "linux,initrd-start", start
);
619 qemu_fdt_setprop_cell(s
->fdt
, "/chosen", "linux,initrd-end",
624 * If dynamic firmware is used, it doesn't know where is the next mode
625 * if kernel argument is not set.
630 /* Compute the fdt load address in dram */
631 fdt_load_addr
= riscv_load_fdt(memmap
[SIFIVE_U_DEV_DRAM
].base
,
632 machine
->ram_size
, s
->fdt
);
633 if (!riscv_is_32bit(&s
->soc
.u_cpus
)) {
634 start_addr_hi32
= (uint64_t)start_addr
>> 32;
638 uint32_t reset_vec
[12] = {
639 s
->msel
, /* MSEL pin state */
640 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */
641 0x02c28613, /* addi a2, t0, %pcrel_lo(1b) */
642 0xf1402573, /* csrr a0, mhartid */
645 0x00028067, /* jr t0 */
646 start_addr
, /* start: .dword */
648 fdt_load_addr
, /* fdt_laddr: .dword */
653 if (riscv_is_32bit(&s
->soc
.u_cpus
)) {
654 reset_vec
[4] = 0x0202a583; /* lw a1, 32(t0) */
655 reset_vec
[5] = 0x0182a283; /* lw t0, 24(t0) */
657 reset_vec
[4] = 0x0202b583; /* ld a1, 32(t0) */
658 reset_vec
[5] = 0x0182b283; /* ld t0, 24(t0) */
662 /* copy in the reset vector in little_endian byte order */
663 for (i
= 0; i
< ARRAY_SIZE(reset_vec
); i
++) {
664 reset_vec
[i
] = cpu_to_le32(reset_vec
[i
]);
666 rom_add_blob_fixed_as("mrom.reset", reset_vec
, sizeof(reset_vec
),
667 memmap
[SIFIVE_U_DEV_MROM
].base
, &address_space_memory
);
669 riscv_rom_copy_firmware_info(machine
, memmap
[SIFIVE_U_DEV_MROM
].base
,
670 memmap
[SIFIVE_U_DEV_MROM
].size
,
671 sizeof(reset_vec
), kernel_entry
);
673 /* Connect an SPI flash to SPI0 */
674 flash_dev
= qdev_new("is25wp256");
675 dinfo
= drive_get(IF_MTD
, 0, 0);
677 qdev_prop_set_drive_err(flash_dev
, "drive",
678 blk_by_legacy_dinfo(dinfo
),
681 qdev_realize_and_unref(flash_dev
, BUS(s
->soc
.spi0
.spi
), &error_fatal
);
683 flash_cs
= qdev_get_gpio_in_named(flash_dev
, SSI_GPIO_CS
, 0);
684 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->soc
.spi0
), 1, flash_cs
);
686 /* Connect an SD card to SPI2 */
687 sd_dev
= ssi_create_peripheral(s
->soc
.spi2
.spi
, "ssi-sd");
689 sd_cs
= qdev_get_gpio_in_named(sd_dev
, SSI_GPIO_CS
, 0);
690 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->soc
.spi2
), 1, sd_cs
);
692 dinfo
= drive_get(IF_SD
, 0, 0);
693 blk
= dinfo
? blk_by_legacy_dinfo(dinfo
) : NULL
;
694 card_dev
= qdev_new(TYPE_SD_CARD
);
695 qdev_prop_set_drive_err(card_dev
, "drive", blk
, &error_fatal
);
696 qdev_prop_set_bit(card_dev
, "spi", true);
697 qdev_realize_and_unref(card_dev
,
698 qdev_get_child_bus(sd_dev
, "sd-bus"),
702 static bool sifive_u_machine_get_start_in_flash(Object
*obj
, Error
**errp
)
704 SiFiveUState
*s
= RISCV_U_MACHINE(obj
);
706 return s
->start_in_flash
;
709 static void sifive_u_machine_set_start_in_flash(Object
*obj
, bool value
, Error
**errp
)
711 SiFiveUState
*s
= RISCV_U_MACHINE(obj
);
713 s
->start_in_flash
= value
;
716 static void sifive_u_machine_instance_init(Object
*obj
)
718 SiFiveUState
*s
= RISCV_U_MACHINE(obj
);
720 s
->start_in_flash
= false;
722 object_property_add_uint32_ptr(obj
, "msel", &s
->msel
,
723 OBJ_PROP_FLAG_READWRITE
);
724 object_property_set_description(obj
, "msel",
725 "Mode Select (MSEL[3:0]) pin state");
727 s
->serial
= OTP_SERIAL
;
728 object_property_add_uint32_ptr(obj
, "serial", &s
->serial
,
729 OBJ_PROP_FLAG_READWRITE
);
730 object_property_set_description(obj
, "serial", "Board serial number");
733 static void sifive_u_machine_class_init(ObjectClass
*oc
, void *data
)
735 MachineClass
*mc
= MACHINE_CLASS(oc
);
737 mc
->desc
= "RISC-V Board compatible with SiFive U SDK";
738 mc
->init
= sifive_u_machine_init
;
739 mc
->max_cpus
= SIFIVE_U_MANAGEMENT_CPU_COUNT
+ SIFIVE_U_COMPUTE_CPU_COUNT
;
740 mc
->min_cpus
= SIFIVE_U_MANAGEMENT_CPU_COUNT
+ 1;
741 mc
->default_cpu_type
= SIFIVE_U_CPU
;
742 mc
->default_cpus
= mc
->min_cpus
;
743 mc
->default_ram_id
= "riscv.sifive.u.ram";
745 object_class_property_add_bool(oc
, "start-in-flash",
746 sifive_u_machine_get_start_in_flash
,
747 sifive_u_machine_set_start_in_flash
);
748 object_class_property_set_description(oc
, "start-in-flash",
749 "Set on to tell QEMU's ROM to jump to "
750 "flash. Otherwise QEMU will jump to DRAM "
751 "or L2LIM depending on the msel value");
754 static const TypeInfo sifive_u_machine_typeinfo
= {
755 .name
= MACHINE_TYPE_NAME("sifive_u"),
756 .parent
= TYPE_MACHINE
,
757 .class_init
= sifive_u_machine_class_init
,
758 .instance_init
= sifive_u_machine_instance_init
,
759 .instance_size
= sizeof(SiFiveUState
),
762 static void sifive_u_machine_init_register_types(void)
764 type_register_static(&sifive_u_machine_typeinfo
);
767 type_init(sifive_u_machine_init_register_types
)
769 static void sifive_u_soc_instance_init(Object
*obj
)
771 SiFiveUSoCState
*s
= RISCV_U_SOC(obj
);
773 object_initialize_child(obj
, "e-cluster", &s
->e_cluster
, TYPE_CPU_CLUSTER
);
774 qdev_prop_set_uint32(DEVICE(&s
->e_cluster
), "cluster-id", 0);
776 object_initialize_child(OBJECT(&s
->e_cluster
), "e-cpus", &s
->e_cpus
,
777 TYPE_RISCV_HART_ARRAY
);
778 qdev_prop_set_uint32(DEVICE(&s
->e_cpus
), "num-harts", 1);
779 qdev_prop_set_uint32(DEVICE(&s
->e_cpus
), "hartid-base", 0);
780 qdev_prop_set_string(DEVICE(&s
->e_cpus
), "cpu-type", SIFIVE_E_CPU
);
781 qdev_prop_set_uint64(DEVICE(&s
->e_cpus
), "resetvec", 0x1004);
783 object_initialize_child(obj
, "u-cluster", &s
->u_cluster
, TYPE_CPU_CLUSTER
);
784 qdev_prop_set_uint32(DEVICE(&s
->u_cluster
), "cluster-id", 1);
786 object_initialize_child(OBJECT(&s
->u_cluster
), "u-cpus", &s
->u_cpus
,
787 TYPE_RISCV_HART_ARRAY
);
789 object_initialize_child(obj
, "prci", &s
->prci
, TYPE_SIFIVE_U_PRCI
);
790 object_initialize_child(obj
, "otp", &s
->otp
, TYPE_SIFIVE_U_OTP
);
791 object_initialize_child(obj
, "gem", &s
->gem
, TYPE_CADENCE_GEM
);
792 object_initialize_child(obj
, "gpio", &s
->gpio
, TYPE_SIFIVE_GPIO
);
793 object_initialize_child(obj
, "pdma", &s
->dma
, TYPE_SIFIVE_PDMA
);
794 object_initialize_child(obj
, "spi0", &s
->spi0
, TYPE_SIFIVE_SPI
);
795 object_initialize_child(obj
, "spi2", &s
->spi2
, TYPE_SIFIVE_SPI
);
796 object_initialize_child(obj
, "pwm0", &s
->pwm
[0], TYPE_SIFIVE_PWM
);
797 object_initialize_child(obj
, "pwm1", &s
->pwm
[1], TYPE_SIFIVE_PWM
);
800 static void sifive_u_soc_realize(DeviceState
*dev
, Error
**errp
)
802 MachineState
*ms
= MACHINE(qdev_get_machine());
803 SiFiveUSoCState
*s
= RISCV_U_SOC(dev
);
804 const MemMapEntry
*memmap
= sifive_u_memmap
;
805 MemoryRegion
*system_memory
= get_system_memory();
806 MemoryRegion
*mask_rom
= g_new(MemoryRegion
, 1);
807 MemoryRegion
*l2lim_mem
= g_new(MemoryRegion
, 1);
808 char *plic_hart_config
;
810 NICInfo
*nd
= &nd_table
[0];
812 qdev_prop_set_uint32(DEVICE(&s
->u_cpus
), "num-harts", ms
->smp
.cpus
- 1);
813 qdev_prop_set_uint32(DEVICE(&s
->u_cpus
), "hartid-base", 1);
814 qdev_prop_set_string(DEVICE(&s
->u_cpus
), "cpu-type", s
->cpu_type
);
815 qdev_prop_set_uint64(DEVICE(&s
->u_cpus
), "resetvec", 0x1004);
817 sysbus_realize(SYS_BUS_DEVICE(&s
->e_cpus
), &error_fatal
);
818 sysbus_realize(SYS_BUS_DEVICE(&s
->u_cpus
), &error_fatal
);
820 * The cluster must be realized after the RISC-V hart array container,
821 * as the container's CPU object is only created on realize, and the
822 * CPU must exist and have been parented into the cluster before the
823 * cluster is realized.
825 qdev_realize(DEVICE(&s
->e_cluster
), NULL
, &error_abort
);
826 qdev_realize(DEVICE(&s
->u_cluster
), NULL
, &error_abort
);
829 memory_region_init_rom(mask_rom
, OBJECT(dev
), "riscv.sifive.u.mrom",
830 memmap
[SIFIVE_U_DEV_MROM
].size
, &error_fatal
);
831 memory_region_add_subregion(system_memory
, memmap
[SIFIVE_U_DEV_MROM
].base
,
835 * Add L2-LIM at reset size.
836 * This should be reduced in size as the L2 Cache Controller WayEnable
837 * register is incremented. Unfortunately I don't see a nice (or any) way
838 * to handle reducing or blocking out the L2 LIM while still allowing it
839 * be re returned to all enabled after a reset. For the time being, just
840 * leave it enabled all the time. This won't break anything, but will be
841 * too generous to misbehaving guests.
843 memory_region_init_ram(l2lim_mem
, NULL
, "riscv.sifive.u.l2lim",
844 memmap
[SIFIVE_U_DEV_L2LIM
].size
, &error_fatal
);
845 memory_region_add_subregion(system_memory
, memmap
[SIFIVE_U_DEV_L2LIM
].base
,
848 /* create PLIC hart topology configuration string */
849 plic_hart_config
= riscv_plic_hart_config_string(ms
->smp
.cpus
);
852 s
->plic
= sifive_plic_create(memmap
[SIFIVE_U_DEV_PLIC
].base
,
853 plic_hart_config
, ms
->smp
.cpus
, 0,
854 SIFIVE_U_PLIC_NUM_SOURCES
,
855 SIFIVE_U_PLIC_NUM_PRIORITIES
,
856 SIFIVE_U_PLIC_PRIORITY_BASE
,
857 SIFIVE_U_PLIC_PENDING_BASE
,
858 SIFIVE_U_PLIC_ENABLE_BASE
,
859 SIFIVE_U_PLIC_ENABLE_STRIDE
,
860 SIFIVE_U_PLIC_CONTEXT_BASE
,
861 SIFIVE_U_PLIC_CONTEXT_STRIDE
,
862 memmap
[SIFIVE_U_DEV_PLIC
].size
);
863 g_free(plic_hart_config
);
864 sifive_uart_create(system_memory
, memmap
[SIFIVE_U_DEV_UART0
].base
,
865 serial_hd(0), qdev_get_gpio_in(DEVICE(s
->plic
), SIFIVE_U_UART0_IRQ
));
866 sifive_uart_create(system_memory
, memmap
[SIFIVE_U_DEV_UART1
].base
,
867 serial_hd(1), qdev_get_gpio_in(DEVICE(s
->plic
), SIFIVE_U_UART1_IRQ
));
868 riscv_aclint_swi_create(memmap
[SIFIVE_U_DEV_CLINT
].base
, 0,
869 ms
->smp
.cpus
, false);
870 riscv_aclint_mtimer_create(memmap
[SIFIVE_U_DEV_CLINT
].base
+
871 RISCV_ACLINT_SWI_SIZE
,
872 RISCV_ACLINT_DEFAULT_MTIMER_SIZE
, 0, ms
->smp
.cpus
,
873 RISCV_ACLINT_DEFAULT_MTIMECMP
, RISCV_ACLINT_DEFAULT_MTIME
,
874 CLINT_TIMEBASE_FREQ
, false);
876 if (!sysbus_realize(SYS_BUS_DEVICE(&s
->prci
), errp
)) {
879 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->prci
), 0, memmap
[SIFIVE_U_DEV_PRCI
].base
);
881 qdev_prop_set_uint32(DEVICE(&s
->gpio
), "ngpio", 16);
882 if (!sysbus_realize(SYS_BUS_DEVICE(&s
->gpio
), errp
)) {
885 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->gpio
), 0, memmap
[SIFIVE_U_DEV_GPIO
].base
);
887 /* Pass all GPIOs to the SOC layer so they are available to the board */
888 qdev_pass_gpios(DEVICE(&s
->gpio
), dev
, NULL
);
890 /* Connect GPIO interrupts to the PLIC */
891 for (i
= 0; i
< 16; i
++) {
892 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->gpio
), i
,
893 qdev_get_gpio_in(DEVICE(s
->plic
),
894 SIFIVE_U_GPIO_IRQ0
+ i
));
898 sysbus_realize(SYS_BUS_DEVICE(&s
->dma
), errp
);
899 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->dma
), 0, memmap
[SIFIVE_U_DEV_PDMA
].base
);
901 /* Connect PDMA interrupts to the PLIC */
902 for (i
= 0; i
< SIFIVE_PDMA_IRQS
; i
++) {
903 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->dma
), i
,
904 qdev_get_gpio_in(DEVICE(s
->plic
),
905 SIFIVE_U_PDMA_IRQ0
+ i
));
908 qdev_prop_set_uint32(DEVICE(&s
->otp
), "serial", s
->serial
);
909 if (!sysbus_realize(SYS_BUS_DEVICE(&s
->otp
), errp
)) {
912 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->otp
), 0, memmap
[SIFIVE_U_DEV_OTP
].base
);
914 /* FIXME use qdev NIC properties instead of nd_table[] */
916 qemu_check_nic_model(nd
, TYPE_CADENCE_GEM
);
917 qdev_set_nic_properties(DEVICE(&s
->gem
), nd
);
919 object_property_set_int(OBJECT(&s
->gem
), "revision", GEM_REVISION
,
921 if (!sysbus_realize(SYS_BUS_DEVICE(&s
->gem
), errp
)) {
924 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->gem
), 0, memmap
[SIFIVE_U_DEV_GEM
].base
);
925 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->gem
), 0,
926 qdev_get_gpio_in(DEVICE(s
->plic
), SIFIVE_U_GEM_IRQ
));
929 for (i
= 0; i
< 2; i
++) {
930 if (!sysbus_realize(SYS_BUS_DEVICE(&s
->pwm
[i
]), errp
)) {
933 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->pwm
[i
]), 0,
934 memmap
[SIFIVE_U_DEV_PWM0
].base
+ (0x1000 * i
));
936 /* Connect PWM interrupts to the PLIC */
937 for (j
= 0; j
< SIFIVE_PWM_IRQS
; j
++) {
938 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->pwm
[i
]), j
,
939 qdev_get_gpio_in(DEVICE(s
->plic
),
940 SIFIVE_U_PWM0_IRQ0
+ (i
* 4) + j
));
944 create_unimplemented_device("riscv.sifive.u.gem-mgmt",
945 memmap
[SIFIVE_U_DEV_GEM_MGMT
].base
, memmap
[SIFIVE_U_DEV_GEM_MGMT
].size
);
947 create_unimplemented_device("riscv.sifive.u.dmc",
948 memmap
[SIFIVE_U_DEV_DMC
].base
, memmap
[SIFIVE_U_DEV_DMC
].size
);
950 create_unimplemented_device("riscv.sifive.u.l2cc",
951 memmap
[SIFIVE_U_DEV_L2CC
].base
, memmap
[SIFIVE_U_DEV_L2CC
].size
);
953 sysbus_realize(SYS_BUS_DEVICE(&s
->spi0
), errp
);
954 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->spi0
), 0,
955 memmap
[SIFIVE_U_DEV_QSPI0
].base
);
956 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->spi0
), 0,
957 qdev_get_gpio_in(DEVICE(s
->plic
), SIFIVE_U_QSPI0_IRQ
));
958 sysbus_realize(SYS_BUS_DEVICE(&s
->spi2
), errp
);
959 sysbus_mmio_map(SYS_BUS_DEVICE(&s
->spi2
), 0,
960 memmap
[SIFIVE_U_DEV_QSPI2
].base
);
961 sysbus_connect_irq(SYS_BUS_DEVICE(&s
->spi2
), 0,
962 qdev_get_gpio_in(DEVICE(s
->plic
), SIFIVE_U_QSPI2_IRQ
));
965 static Property sifive_u_soc_props
[] = {
966 DEFINE_PROP_UINT32("serial", SiFiveUSoCState
, serial
, OTP_SERIAL
),
967 DEFINE_PROP_STRING("cpu-type", SiFiveUSoCState
, cpu_type
),
968 DEFINE_PROP_END_OF_LIST()
971 static void sifive_u_soc_class_init(ObjectClass
*oc
, void *data
)
973 DeviceClass
*dc
= DEVICE_CLASS(oc
);
975 device_class_set_props(dc
, sifive_u_soc_props
);
976 dc
->realize
= sifive_u_soc_realize
;
977 /* Reason: Uses serial_hds in realize function, thus can't be used twice */
978 dc
->user_creatable
= false;
981 static const TypeInfo sifive_u_soc_type_info
= {
982 .name
= TYPE_RISCV_U_SOC
,
983 .parent
= TYPE_DEVICE
,
984 .instance_size
= sizeof(SiFiveUSoCState
),
985 .instance_init
= sifive_u_soc_instance_init
,
986 .class_init
= sifive_u_soc_class_init
,
989 static void sifive_u_soc_register_types(void)
991 type_register_static(&sifive_u_soc_type_info
);
994 type_init(sifive_u_soc_register_types
)