hw/sensor/adm1272.c

   1 /*
   2  * Analog Devices ADM1272 High Voltage Positive Hot Swap Controller and Digital
   3  * Power Monitor with PMBus
   4  *
   5  * Copyright 2021 Google LLC
   6  *
   7  * SPDX-License-Identifier: GPL-2.0-or-later
   8  */
   9
  10 #include "qemu/osdep.h"
  11 #include "hw/i2c/pmbus_device.h"
  12 #include "hw/irq.h"
  13 #include "migration/vmstate.h"
  14 #include "qapi/error.h"
  15 #include "qapi/visitor.h"
  16 #include "qemu/log.h"
  17 #include "qemu/module.h"
  18
  19 #define TYPE_ADM1272 "adm1272"
  20 #define ADM1272(obj) OBJECT_CHECK(ADM1272State, (obj), TYPE_ADM1272)
  21
  22 #define ADM1272_RESTART_TIME            0xCC
  23 #define ADM1272_MFR_PEAK_IOUT           0xD0
  24 #define ADM1272_MFR_PEAK_VIN            0xD1
  25 #define ADM1272_MFR_PEAK_VOUT           0xD2
  26 #define ADM1272_MFR_PMON_CONTROL        0xD3
  27 #define ADM1272_MFR_PMON_CONFIG         0xD4
  28 #define ADM1272_MFR_ALERT1_CONFIG       0xD5
  29 #define ADM1272_MFR_ALERT2_CONFIG       0xD6
  30 #define ADM1272_MFR_PEAK_TEMPERATURE    0xD7
  31 #define ADM1272_MFR_DEVICE_CONFIG       0xD8
  32 #define ADM1272_MFR_POWER_CYCLE         0xD9
  33 #define ADM1272_MFR_PEAK_PIN            0xDA
  34 #define ADM1272_MFR_READ_PIN_EXT        0xDB
  35 #define ADM1272_MFR_READ_EIN_EXT        0xDC
  36
  37 #define ADM1272_HYSTERESIS_LOW          0xF2
  38 #define ADM1272_HYSTERESIS_HIGH         0xF3
  39 #define ADM1272_STATUS_HYSTERESIS       0xF4
  40 #define ADM1272_STATUS_GPIO             0xF5
  41 #define ADM1272_STRT_UP_IOUT_LIM        0xF6
  42
  43 /* Defaults */
  44 #define ADM1272_OPERATION_DEFAULT       0x80
  45 #define ADM1272_CAPABILITY_DEFAULT      0xB0
  46 #define ADM1272_CAPABILITY_NO_PEC       0x30
  47 #define ADM1272_DIRECT_MODE             0x40
  48 #define ADM1272_HIGH_LIMIT_DEFAULT      0x0FFF
  49 #define ADM1272_PIN_OP_DEFAULT          0x7FFF
  50 #define ADM1272_PMBUS_REVISION_DEFAULT  0x22
  51 #define ADM1272_MFR_ID_DEFAULT          "ADI"
  52 #define ADM1272_MODEL_DEFAULT           "ADM1272-A1"
  53 #define ADM1272_MFR_DEFAULT_REVISION    "25"
  54 #define ADM1272_DEFAULT_DATE            "160301"
  55 #define ADM1272_RESTART_TIME_DEFAULT    0x64
  56 #define ADM1272_PMON_CONTROL_DEFAULT    0x1
  57 #define ADM1272_PMON_CONFIG_DEFAULT     0x3F35
  58 #define ADM1272_DEVICE_CONFIG_DEFAULT   0x8
  59 #define ADM1272_HYSTERESIS_HIGH_DEFAULT     0xFFFF
  60 #define ADM1272_STRT_UP_IOUT_LIM_DEFAULT    0x000F
  61 #define ADM1272_VOLT_DEFAULT            12000
  62 #define ADM1272_IOUT_DEFAULT            25000
  63 #define ADM1272_PWR_DEFAULT             300  /* 12V 25A */
  64 #define ADM1272_SHUNT                   300 /* micro-ohms */
  65 #define ADM1272_VOLTAGE_COEFF_DEFAULT   1
  66 #define ADM1272_CURRENT_COEFF_DEFAULT   3
  67 #define ADM1272_PWR_COEFF_DEFAULT       7
  68 #define ADM1272_IOUT_OFFSET             0x5000
  69 #define ADM1272_IOUT_OFFSET             0x5000
  70
  71
  72 typedef struct ADM1272State {
  73     PMBusDevice parent;
  74
  75     uint64_t ein_ext;
  76     uint32_t pin_ext;
  77     uint8_t restart_time;
  78
  79     uint16_t peak_vin;
  80     uint16_t peak_vout;
  81     uint16_t peak_iout;
  82     uint16_t peak_temperature;
  83     uint16_t peak_pin;
  84
  85     uint8_t pmon_control;
  86     uint16_t pmon_config;
  87     uint16_t alert1_config;
  88     uint16_t alert2_config;
  89     uint16_t device_config;
  90
  91     uint16_t hysteresis_low;
  92     uint16_t hysteresis_high;
  93     uint8_t status_hysteresis;
  94     uint8_t status_gpio;
  95
  96     uint16_t strt_up_iout_lim;
  97
  98 } ADM1272State;
  99
 100 static const PMBusCoefficients adm1272_coefficients[] = {
 101     [0] = { 6770, 0, -2 },        /* voltage, vrange 60V */
 102     [1] = { 4062, 0, -2 },        /* voltage, vrange 100V */
 103     [2] = { 1326, 20480, -1 },    /* current, vsense range 15mV */
 104     [3] = { 663, 20480, -1 },     /* current, vsense range 30mV */
 105     [4] = { 3512, 0, -2 },        /* power, vrange 60V, irange 15mV */
 106     [5] = { 21071, 0, -3 },       /* power, vrange 100V, irange 15mV */
 107     [6] = { 17561, 0, -3 },       /* power, vrange 60V, irange 30mV */
 108     [7] = { 10535, 0, -3 },       /* power, vrange 100V, irange 30mV */
 109     [8] = { 42, 31871, -1 },      /* temperature */
 110 };
 111
 112 static void adm1272_check_limits(ADM1272State *s)
 113 {
 114     PMBusDevice *pmdev = PMBUS_DEVICE(s);
 115
 116     pmbus_check_limits(pmdev);
 117
 118     if (pmdev->pages[0].read_vout > s->peak_vout) {
 119         s->peak_vout = pmdev->pages[0].read_vout;
 120     }
 121
 122     if (pmdev->pages[0].read_vin > s->peak_vin) {
 123         s->peak_vin = pmdev->pages[0].read_vin;
 124     }
 125
 126     if (pmdev->pages[0].read_iout > s->peak_iout) {
 127         s->peak_iout = pmdev->pages[0].read_iout;
 128     }
 129
 130     if (pmdev->pages[0].read_temperature_1 > s->peak_temperature) {
 131         s->peak_temperature = pmdev->pages[0].read_temperature_1;
 132     }
 133
 134     if (pmdev->pages[0].read_pin > s->peak_pin) {
 135         s->peak_pin = pmdev->pages[0].read_pin;
 136     }
 137 }
 138
 139 static uint16_t adm1272_millivolts_to_direct(uint32_t value)
 140 {
 141     PMBusCoefficients c = adm1272_coefficients[ADM1272_VOLTAGE_COEFF_DEFAULT];
 142     c.b = c.b * 1000;
 143     c.R = c.R - 3;
 144     return pmbus_data2direct_mode(c, value);
 145 }
 146
 147 static uint32_t adm1272_direct_to_millivolts(uint16_t value)
 148 {
 149     PMBusCoefficients c = adm1272_coefficients[ADM1272_VOLTAGE_COEFF_DEFAULT];
 150     c.b = c.b * 1000;
 151     c.R = c.R - 3;
 152     return pmbus_direct_mode2data(c, value);
 153 }
 154
 155 static uint16_t adm1272_milliamps_to_direct(uint32_t value)
 156 {
 157     PMBusCoefficients c = adm1272_coefficients[ADM1272_CURRENT_COEFF_DEFAULT];
 158     /* Y = (m * r_sense * x - b) * 10^R */
 159     c.m = c.m * ADM1272_SHUNT / 1000; /* micro-ohms */
 160     c.b = c.b * 1000;
 161     c.R = c.R - 3;
 162     return pmbus_data2direct_mode(c, value);
 163 }
 164
 165 static uint32_t adm1272_direct_to_milliamps(uint16_t value)
 166 {
 167     PMBusCoefficients c = adm1272_coefficients[ADM1272_CURRENT_COEFF_DEFAULT];
 168     c.m = c.m * ADM1272_SHUNT / 1000;
 169     c.b = c.b * 1000;
 170     c.R = c.R - 3;
 171     return pmbus_direct_mode2data(c, value);
 172 }
 173
 174 static uint16_t adm1272_watts_to_direct(uint32_t value)
 175 {
 176     PMBusCoefficients c = adm1272_coefficients[ADM1272_PWR_COEFF_DEFAULT];
 177     c.m = c.m * ADM1272_SHUNT / 1000;
 178     return pmbus_data2direct_mode(c, value);
 179 }
 180
 181 static uint32_t adm1272_direct_to_watts(uint16_t value)
 182 {
 183     PMBusCoefficients c = adm1272_coefficients[ADM1272_PWR_COEFF_DEFAULT];
 184     c.m = c.m * ADM1272_SHUNT / 1000;
 185     return pmbus_direct_mode2data(c, value);
 186 }
 187
 188 static void adm1272_exit_reset(Object *obj)
 189 {
 190     ADM1272State *s = ADM1272(obj);
 191     PMBusDevice *pmdev = PMBUS_DEVICE(obj);
 192
 193     pmdev->page = 0;
 194     pmdev->pages[0].operation = ADM1272_OPERATION_DEFAULT;
 195
 196
 197     pmdev->capability = ADM1272_CAPABILITY_NO_PEC;
 198     pmdev->pages[0].revision = ADM1272_PMBUS_REVISION_DEFAULT;
 199     pmdev->pages[0].vout_mode = ADM1272_DIRECT_MODE;
 200     pmdev->pages[0].vout_ov_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
 201     pmdev->pages[0].vout_uv_warn_limit = 0;
 202     pmdev->pages[0].iout_oc_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
 203     pmdev->pages[0].ot_fault_limit = ADM1272_HIGH_LIMIT_DEFAULT;
 204     pmdev->pages[0].ot_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
 205     pmdev->pages[0].vin_ov_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
 206     pmdev->pages[0].vin_uv_warn_limit = 0;
 207     pmdev->pages[0].pin_op_warn_limit = ADM1272_PIN_OP_DEFAULT;
 208
 209     pmdev->pages[0].status_word = 0;
 210     pmdev->pages[0].status_vout = 0;
 211     pmdev->pages[0].status_iout = 0;
 212     pmdev->pages[0].status_input = 0;
 213     pmdev->pages[0].status_temperature = 0;
 214     pmdev->pages[0].status_mfr_specific = 0;
 215
 216     pmdev->pages[0].read_vin
 217         = adm1272_millivolts_to_direct(ADM1272_VOLT_DEFAULT);
 218     pmdev->pages[0].read_vout
 219         = adm1272_millivolts_to_direct(ADM1272_VOLT_DEFAULT);
 220     pmdev->pages[0].read_iout
 221         = adm1272_milliamps_to_direct(ADM1272_IOUT_DEFAULT);
 222     pmdev->pages[0].read_temperature_1 = 0;
 223     pmdev->pages[0].read_pin = adm1272_watts_to_direct(ADM1272_PWR_DEFAULT);
 224     pmdev->pages[0].revision = ADM1272_PMBUS_REVISION_DEFAULT;
 225     pmdev->pages[0].mfr_id = ADM1272_MFR_ID_DEFAULT;
 226     pmdev->pages[0].mfr_model = ADM1272_MODEL_DEFAULT;
 227     pmdev->pages[0].mfr_revision = ADM1272_MFR_DEFAULT_REVISION;
 228     pmdev->pages[0].mfr_date = ADM1272_DEFAULT_DATE;
 229
 230     s->pin_ext = 0;
 231     s->ein_ext = 0;
 232     s->restart_time = ADM1272_RESTART_TIME_DEFAULT;
 233
 234     s->peak_vin = 0;
 235     s->peak_vout = 0;
 236     s->peak_iout = 0;
 237     s->peak_temperature = 0;
 238     s->peak_pin = 0;
 239
 240     s->pmon_control = ADM1272_PMON_CONTROL_DEFAULT;
 241     s->pmon_config = ADM1272_PMON_CONFIG_DEFAULT;
 242     s->alert1_config = 0;
 243     s->alert2_config = 0;
 244     s->device_config = ADM1272_DEVICE_CONFIG_DEFAULT;
 245
 246     s->hysteresis_low = 0;
 247     s->hysteresis_high = ADM1272_HYSTERESIS_HIGH_DEFAULT;
 248     s->status_hysteresis = 0;
 249     s->status_gpio = 0;
 250
 251     s->strt_up_iout_lim = ADM1272_STRT_UP_IOUT_LIM_DEFAULT;
 252 }
 253
 254 static uint8_t adm1272_read_byte(PMBusDevice *pmdev)
 255 {
 256     ADM1272State *s = ADM1272(pmdev);
 257
 258     switch (pmdev->code) {
 259     case ADM1272_RESTART_TIME:
 260         pmbus_send8(pmdev, s->restart_time);
 261         break;
 262
 263     case ADM1272_MFR_PEAK_IOUT:
 264         pmbus_send16(pmdev, s->peak_iout);
 265         break;
 266
 267     case ADM1272_MFR_PEAK_VIN:
 268         pmbus_send16(pmdev, s->peak_vin);
 269         break;
 270
 271     case ADM1272_MFR_PEAK_VOUT:
 272         pmbus_send16(pmdev, s->peak_vout);
 273         break;
 274
 275     case ADM1272_MFR_PMON_CONTROL:
 276         pmbus_send8(pmdev, s->pmon_control);
 277         break;
 278
 279     case ADM1272_MFR_PMON_CONFIG:
 280         pmbus_send16(pmdev, s->pmon_config);
 281         break;
 282
 283     case ADM1272_MFR_ALERT1_CONFIG:
 284         pmbus_send16(pmdev, s->alert1_config);
 285         break;
 286
 287     case ADM1272_MFR_ALERT2_CONFIG:
 288         pmbus_send16(pmdev, s->alert2_config);
 289         break;
 290
 291     case ADM1272_MFR_PEAK_TEMPERATURE:
 292         pmbus_send16(pmdev, s->peak_temperature);
 293         break;
 294
 295     case ADM1272_MFR_DEVICE_CONFIG:
 296         pmbus_send16(pmdev, s->device_config);
 297         break;
 298
 299     case ADM1272_MFR_PEAK_PIN:
 300         pmbus_send16(pmdev, s->peak_pin);
 301         break;
 302
 303     case ADM1272_MFR_READ_PIN_EXT:
 304         pmbus_send32(pmdev, s->pin_ext);
 305         break;
 306
 307     case ADM1272_MFR_READ_EIN_EXT:
 308         pmbus_send64(pmdev, s->ein_ext);
 309         break;
 310
 311     case ADM1272_HYSTERESIS_LOW:
 312         pmbus_send16(pmdev, s->hysteresis_low);
 313         break;
 314
 315     case ADM1272_HYSTERESIS_HIGH:
 316         pmbus_send16(pmdev, s->hysteresis_high);
 317         break;
 318
 319     case ADM1272_STATUS_HYSTERESIS:
 320         pmbus_send16(pmdev, s->status_hysteresis);
 321         break;
 322
 323     case ADM1272_STATUS_GPIO:
 324         pmbus_send16(pmdev, s->status_gpio);
 325         break;
 326
 327     case ADM1272_STRT_UP_IOUT_LIM:
 328         pmbus_send16(pmdev, s->strt_up_iout_lim);
 329         break;
 330
 331     default:
 332         qemu_log_mask(LOG_GUEST_ERROR,
 333                       "%s: reading from unsupported register: 0x%02x\n",
 334                       __func__, pmdev->code);
 335         return 0xFF;
 336         break;
 337     }
 338
 339     return 0;
 340 }
 341
 342 static int adm1272_write_data(PMBusDevice *pmdev, const uint8_t *buf,
 343                               uint8_t len)
 344 {
 345     ADM1272State *s = ADM1272(pmdev);
 346
 347     if (len == 0) {
 348         qemu_log_mask(LOG_GUEST_ERROR, "%s: writing empty data\n", __func__);
 349         return -1;
 350     }
 351
 352     pmdev->code = buf[0]; /* PMBus command code */
 353
 354     if (len == 1) {
 355         return 0;
 356     }
 357
 358     /* Exclude command code from buffer */
 359     buf++;
 360     len--;
 361
 362     switch (pmdev->code) {
 363
 364     case ADM1272_RESTART_TIME:
 365         s->restart_time = pmbus_receive8(pmdev);
 366         break;
 367
 368     case ADM1272_MFR_PMON_CONTROL:
 369         s->pmon_control = pmbus_receive8(pmdev);
 370         break;
 371
 372     case ADM1272_MFR_PMON_CONFIG:
 373         s->pmon_config = pmbus_receive16(pmdev);
 374         break;
 375
 376     case ADM1272_MFR_ALERT1_CONFIG:
 377         s->alert1_config = pmbus_receive16(pmdev);
 378         break;
 379
 380     case ADM1272_MFR_ALERT2_CONFIG:
 381         s->alert2_config = pmbus_receive16(pmdev);
 382         break;
 383
 384     case ADM1272_MFR_DEVICE_CONFIG:
 385         s->device_config = pmbus_receive16(pmdev);
 386         break;
 387
 388     case ADM1272_MFR_POWER_CYCLE:
 389         adm1272_exit_reset((Object *)s);
 390         break;
 391
 392     case ADM1272_HYSTERESIS_LOW:
 393         s->hysteresis_low = pmbus_receive16(pmdev);
 394         break;
 395
 396     case ADM1272_HYSTERESIS_HIGH:
 397         s->hysteresis_high = pmbus_receive16(pmdev);
 398         break;
 399
 400     case ADM1272_STRT_UP_IOUT_LIM:
 401         s->strt_up_iout_lim = pmbus_receive16(pmdev);
 402         adm1272_check_limits(s);
 403         break;
 404
 405     default:
 406         qemu_log_mask(LOG_GUEST_ERROR,
 407                       "%s: writing to unsupported register: 0x%02x\n",
 408                       __func__, pmdev->code);
 409         break;
 410     }
 411     return 0;
 412 }
 413
 414 static void adm1272_get(Object *obj, Visitor *v, const char *name, void *opaque,
 415                         Error **errp)
 416 {
 417     uint16_t value;
 418
 419     if (strcmp(name, "vin") == 0 || strcmp(name, "vout") == 0) {
 420         value = adm1272_direct_to_millivolts(*(uint16_t *)opaque);
 421     } else if (strcmp(name, "iout") == 0) {
 422         value = adm1272_direct_to_milliamps(*(uint16_t *)opaque);
 423     } else if (strcmp(name, "pin") == 0) {
 424         value = adm1272_direct_to_watts(*(uint16_t *)opaque);
 425     } else {
 426         value = *(uint16_t *)opaque;
 427     }
 428
 429     visit_type_uint16(v, name, &value, errp);
 430 }
 431
 432 static void adm1272_set(Object *obj, Visitor *v, const char *name, void *opaque,
 433                         Error **errp)
 434 {
 435     ADM1272State *s = ADM1272(obj);
 436     uint16_t *internal = opaque;
 437     uint16_t value;
 438
 439     if (!visit_type_uint16(v, name, &value, errp)) {
 440         return;
 441     }
 442
 443     if (strcmp(name, "vin") == 0 || strcmp(name, "vout") == 0) {
 444         *internal = adm1272_millivolts_to_direct(value);
 445     } else if (strcmp(name, "iout") == 0) {
 446         *internal = adm1272_milliamps_to_direct(value);
 447     } else if (strcmp(name, "pin") == 0) {
 448         *internal = adm1272_watts_to_direct(value);
 449     } else {
 450         *internal = value;
 451     }
 452
 453     adm1272_check_limits(s);
 454 }
 455
 456 static const VMStateDescription vmstate_adm1272 = {
 457     .name = "ADM1272",
 458     .version_id = 0,
 459     .minimum_version_id = 0,
 460     .fields = (VMStateField[]){
 461         VMSTATE_PMBUS_DEVICE(parent, ADM1272State),
 462         VMSTATE_UINT64(ein_ext, ADM1272State),
 463         VMSTATE_UINT32(pin_ext, ADM1272State),
 464         VMSTATE_UINT8(restart_time, ADM1272State),
 465
 466         VMSTATE_UINT16(peak_vin, ADM1272State),
 467         VMSTATE_UINT16(peak_vout, ADM1272State),
 468         VMSTATE_UINT16(peak_iout, ADM1272State),
 469         VMSTATE_UINT16(peak_temperature, ADM1272State),
 470         VMSTATE_UINT16(peak_pin, ADM1272State),
 471
 472         VMSTATE_UINT8(pmon_control, ADM1272State),
 473         VMSTATE_UINT16(pmon_config, ADM1272State),
 474         VMSTATE_UINT16(alert1_config, ADM1272State),
 475         VMSTATE_UINT16(alert2_config, ADM1272State),
 476         VMSTATE_UINT16(device_config, ADM1272State),
 477
 478         VMSTATE_UINT16(hysteresis_low, ADM1272State),
 479         VMSTATE_UINT16(hysteresis_high, ADM1272State),
 480         VMSTATE_UINT8(status_hysteresis, ADM1272State),
 481         VMSTATE_UINT8(status_gpio, ADM1272State),
 482
 483         VMSTATE_UINT16(strt_up_iout_lim, ADM1272State),
 484         VMSTATE_END_OF_LIST()
 485     }
 486 };
 487
 488 static void adm1272_init(Object *obj)
 489 {
 490     PMBusDevice *pmdev = PMBUS_DEVICE(obj);
 491     uint64_t flags = PB_HAS_VOUT_MODE | PB_HAS_VOUT | PB_HAS_VIN | PB_HAS_IOUT |
 492                      PB_HAS_PIN | PB_HAS_TEMPERATURE | PB_HAS_MFR_INFO;
 493
 494     pmbus_page_config(pmdev, 0, flags);
 495
 496     object_property_add(obj, "vin", "uint16",
 497                         adm1272_get,
 498                         adm1272_set, NULL, &pmdev->pages[0].read_vin);
 499
 500     object_property_add(obj, "vout", "uint16",
 501                         adm1272_get,
 502                         adm1272_set, NULL, &pmdev->pages[0].read_vout);
 503
 504     object_property_add(obj, "iout", "uint16",
 505                         adm1272_get,
 506                         adm1272_set, NULL, &pmdev->pages[0].read_iout);
 507
 508     object_property_add(obj, "pin", "uint16",
 509                         adm1272_get,
 510                         adm1272_set, NULL, &pmdev->pages[0].read_pin);
 511
 512 }
 513
 514 static void adm1272_class_init(ObjectClass *klass, void *data)
 515 {
 516     ResettableClass *rc = RESETTABLE_CLASS(klass);
 517     DeviceClass *dc = DEVICE_CLASS(klass);
 518     PMBusDeviceClass *k = PMBUS_DEVICE_CLASS(klass);
 519
 520     dc->desc = "Analog Devices ADM1272 Hot Swap controller";
 521     dc->vmsd = &vmstate_adm1272;
 522     k->write_data = adm1272_write_data;
 523     k->receive_byte = adm1272_read_byte;
 524     k->device_num_pages = 1;
 525
 526     rc->phases.exit = adm1272_exit_reset;
 527 }
 528
 529 static const TypeInfo adm1272_info = {
 530     .name = TYPE_ADM1272,
 531     .parent = TYPE_PMBUS_DEVICE,
 532     .instance_size = sizeof(ADM1272State),
 533     .instance_init = adm1272_init,
 534     .class_init = adm1272_class_init,
 535 };
 536
 537 static void adm1272_register_types(void)
 538 {
 539     type_register_static(&adm1272_info);
 540 }
 541
 542 type_init(adm1272_register_types)