fpu/softfloat-specialize.h

   1 /*
   2  * QEMU float support
   3  *
   4  * Derived from SoftFloat.
   5  */
   6
   7 /*============================================================================
   8
   9 This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
  10 Arithmetic Package, Release 2b.
  11
  12 Written by John R. Hauser.  This work was made possible in part by the
  13 International Computer Science Institute, located at Suite 600, 1947 Center
  14 Street, Berkeley, California 94704.  Funding was partially provided by the
  15 National Science Foundation under grant MIP-9311980.  The original version
  16 of this code was written as part of a project to build a fixed-point vector
  17 processor in collaboration with the University of California at Berkeley,
  18 overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
  19 is available through the Web page `http://www.cs.berkeley.edu/~jhauser/
  20 arithmetic/SoftFloat.html'.
  21
  22 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort has
  23 been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT TIMES
  24 RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO PERSONS
  25 AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ALL LOSSES,
  26 COSTS, OR OTHER PROBLEMS THEY INCUR DUE TO THE SOFTWARE, AND WHO FURTHERMORE
  27 EFFECTIVELY INDEMNIFY JOHN HAUSER AND THE INTERNATIONAL COMPUTER SCIENCE
  28 INSTITUTE (possibly via similar legal warning) AGAINST ALL LOSSES, COSTS, OR
  29 OTHER PROBLEMS INCURRED BY THEIR CUSTOMERS AND CLIENTS DUE TO THE SOFTWARE.
  30
  31 Derivative works are acceptable, even for commercial purposes, so long as
  32 (1) the source code for the derivative work includes prominent notice that
  33 the work is derivative, and (2) the source code includes prominent notice with
  34 these four paragraphs for those parts of this code that are retained.
  35
  36 =============================================================================*/
  37
  38 #if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
  39 #define SNAN_BIT_IS_ONE         1
  40 #else
  41 #define SNAN_BIT_IS_ONE         0
  42 #endif
  43
  44 /*----------------------------------------------------------------------------
  45 | The pattern for a default generated half-precision NaN.
  46 *----------------------------------------------------------------------------*/
  47 #if defined(TARGET_ARM)
  48 const float16 float16_default_nan = const_float16(0x7E00);
  49 #elif SNAN_BIT_IS_ONE
  50 const float16 float16_default_nan = const_float16(0x7DFF);
  51 #else
  52 const float16 float16_default_nan = const_float16(0xFE00);
  53 #endif
  54
  55 /*----------------------------------------------------------------------------
  56 | The pattern for a default generated single-precision NaN.
  57 *----------------------------------------------------------------------------*/
  58 #if defined(TARGET_SPARC)
  59 const float32 float32_default_nan = const_float32(0x7FFFFFFF);
  60 #elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA)
  61 const float32 float32_default_nan = const_float32(0x7FC00000);
  62 #elif SNAN_BIT_IS_ONE
  63 const float32 float32_default_nan = const_float32(0x7FBFFFFF);
  64 #else
  65 const float32 float32_default_nan = const_float32(0xFFC00000);
  66 #endif
  67
  68 /*----------------------------------------------------------------------------
  69 | The pattern for a default generated double-precision NaN.
  70 *----------------------------------------------------------------------------*/
  71 #if defined(TARGET_SPARC)
  72 const float64 float64_default_nan = const_float64(LIT64( 0x7FFFFFFFFFFFFFFF ));
  73 #elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA)
  74 const float64 float64_default_nan = const_float64(LIT64( 0x7FF8000000000000 ));
  75 #elif SNAN_BIT_IS_ONE
  76 const float64 float64_default_nan = const_float64(LIT64( 0x7FF7FFFFFFFFFFFF ));
  77 #else
  78 const float64 float64_default_nan = const_float64(LIT64( 0xFFF8000000000000 ));
  79 #endif
  80
  81 /*----------------------------------------------------------------------------
  82 | The pattern for a default generated extended double-precision NaN.
  83 *----------------------------------------------------------------------------*/
  84 #if SNAN_BIT_IS_ONE
  85 #define floatx80_default_nan_high 0x7FFF
  86 #define floatx80_default_nan_low  LIT64( 0xBFFFFFFFFFFFFFFF )
  87 #else
  88 #define floatx80_default_nan_high 0xFFFF
  89 #define floatx80_default_nan_low  LIT64( 0xC000000000000000 )
  90 #endif
  91
  92 const floatx80 floatx80_default_nan = make_floatx80(floatx80_default_nan_high,
  93                                                     floatx80_default_nan_low);
  94
  95 /*----------------------------------------------------------------------------
  96 | The pattern for a default generated quadruple-precision NaN.  The `high' and
  97 | `low' values hold the most- and least-significant bits, respectively.
  98 *----------------------------------------------------------------------------*/
  99 #if SNAN_BIT_IS_ONE
 100 #define float128_default_nan_high LIT64( 0x7FFF7FFFFFFFFFFF )
 101 #define float128_default_nan_low  LIT64( 0xFFFFFFFFFFFFFFFF )
 102 #else
 103 #define float128_default_nan_high LIT64( 0xFFFF800000000000 )
 104 #define float128_default_nan_low  LIT64( 0x0000000000000000 )
 105 #endif
 106
 107 const float128 float128_default_nan = make_float128(float128_default_nan_high,
 108                                                     float128_default_nan_low);
 109
 110 /*----------------------------------------------------------------------------
 111 | Raises the exceptions specified by `flags'.  Floating-point traps can be
 112 | defined here if desired.  It is currently not possible for such a trap
 113 | to substitute a result value.  If traps are not implemented, this routine
 114 | should be simply `float_exception_flags |= flags;'.
 115 *----------------------------------------------------------------------------*/
 116
 117 void float_raise( int8 flags STATUS_PARAM )
 118 {
 119     STATUS(float_exception_flags) |= flags;
 120 }
 121
 122 /*----------------------------------------------------------------------------
 123 | Internal canonical NaN format.
 124 *----------------------------------------------------------------------------*/
 125 typedef struct {
 126     flag sign;
 127     uint64_t high, low;
 128 } commonNaNT;
 129
 130 /*----------------------------------------------------------------------------
 131 | Returns 1 if the half-precision floating-point value `a' is a quiet
 132 | NaN; otherwise returns 0.
 133 *----------------------------------------------------------------------------*/
 134
 135 int float16_is_quiet_nan(float16 a_)
 136 {
 137     uint16_t a = float16_val(a_);
 138 #if SNAN_BIT_IS_ONE
 139     return (((a >> 9) & 0x3F) == 0x3E) && (a & 0x1FF);
 140 #else
 141     return ((a & ~0x8000) >= 0x7c80);
 142 #endif
 143 }
 144
 145 /*----------------------------------------------------------------------------
 146 | Returns 1 if the half-precision floating-point value `a' is a signaling
 147 | NaN; otherwise returns 0.
 148 *----------------------------------------------------------------------------*/
 149
 150 int float16_is_signaling_nan(float16 a_)
 151 {
 152     uint16_t a = float16_val(a_);
 153 #if SNAN_BIT_IS_ONE
 154     return ((a & ~0x8000) >= 0x7c80);
 155 #else
 156     return (((a >> 9) & 0x3F) == 0x3E) && (a & 0x1FF);
 157 #endif
 158 }
 159
 160 /*----------------------------------------------------------------------------
 161 | Returns a quiet NaN if the half-precision floating point value `a' is a
 162 | signaling NaN; otherwise returns `a'.
 163 *----------------------------------------------------------------------------*/
 164 float16 float16_maybe_silence_nan(float16 a_)
 165 {
 166     if (float16_is_signaling_nan(a_)) {
 167 #if SNAN_BIT_IS_ONE
 168 #  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
 169         return float16_default_nan;
 170 #  else
 171 #    error Rules for silencing a signaling NaN are target-specific
 172 #  endif
 173 #else
 174         uint16_t a = float16_val(a_);
 175         a |= (1 << 9);
 176         return make_float16(a);
 177 #endif
 178     }
 179     return a_;
 180 }
 181
 182 /*----------------------------------------------------------------------------
 183 | Returns the result of converting the half-precision floating-point NaN
 184 | `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
 185 | exception is raised.
 186 *----------------------------------------------------------------------------*/
 187
 188 static commonNaNT float16ToCommonNaN( float16 a STATUS_PARAM )
 189 {
 190     commonNaNT z;
 191
 192     if ( float16_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR );
 193     z.sign = float16_val(a) >> 15;
 194     z.low = 0;
 195     z.high = ((uint64_t) float16_val(a))<<54;
 196     return z;
 197 }
 198
 199 /*----------------------------------------------------------------------------
 200 | Returns the result of converting the canonical NaN `a' to the half-
 201 | precision floating-point format.
 202 *----------------------------------------------------------------------------*/
 203
 204 static float16 commonNaNToFloat16(commonNaNT a STATUS_PARAM)
 205 {
 206     uint16_t mantissa = a.high>>54;
 207
 208     if (STATUS(default_nan_mode)) {
 209         return float16_default_nan;
 210     }
 211
 212     if (mantissa) {
 213         return make_float16(((((uint16_t) a.sign) << 15)
 214                              | (0x1F << 10) | mantissa));
 215     } else {
 216         return float16_default_nan;
 217     }
 218 }
 219
 220 /*----------------------------------------------------------------------------
 221 | Returns 1 if the single-precision floating-point value `a' is a quiet
 222 | NaN; otherwise returns 0.
 223 *----------------------------------------------------------------------------*/
 224
 225 int float32_is_quiet_nan( float32 a_ )
 226 {
 227     uint32_t a = float32_val(a_);
 228 #if SNAN_BIT_IS_ONE
 229     return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
 230 #else
 231     return ( 0xFF800000 <= (uint32_t) ( a<<1 ) );
 232 #endif
 233 }
 234
 235 /*----------------------------------------------------------------------------
 236 | Returns 1 if the single-precision floating-point value `a' is a signaling
 237 | NaN; otherwise returns 0.
 238 *----------------------------------------------------------------------------*/
 239
 240 int float32_is_signaling_nan( float32 a_ )
 241 {
 242     uint32_t a = float32_val(a_);
 243 #if SNAN_BIT_IS_ONE
 244     return ( 0xFF800000 <= (uint32_t) ( a<<1 ) );
 245 #else
 246     return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
 247 #endif
 248 }
 249
 250 /*----------------------------------------------------------------------------
 251 | Returns a quiet NaN if the single-precision floating point value `a' is a
 252 | signaling NaN; otherwise returns `a'.
 253 *----------------------------------------------------------------------------*/
 254
 255 float32 float32_maybe_silence_nan( float32 a_ )
 256 {
 257     if (float32_is_signaling_nan(a_)) {
 258 #if SNAN_BIT_IS_ONE
 259 #  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
 260         return float32_default_nan;
 261 #  else
 262 #    error Rules for silencing a signaling NaN are target-specific
 263 #  endif
 264 #else
 265         uint32_t a = float32_val(a_);
 266         a |= (1 << 22);
 267         return make_float32(a);
 268 #endif
 269     }
 270     return a_;
 271 }
 272
 273 /*----------------------------------------------------------------------------
 274 | Returns the result of converting the single-precision floating-point NaN
 275 | `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
 276 | exception is raised.
 277 *----------------------------------------------------------------------------*/
 278
 279 static commonNaNT float32ToCommonNaN( float32 a STATUS_PARAM )
 280 {
 281     commonNaNT z;
 282
 283     if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR );
 284     z.sign = float32_val(a)>>31;
 285     z.low = 0;
 286     z.high = ( (uint64_t) float32_val(a) )<<41;
 287     return z;
 288 }
 289
 290 /*----------------------------------------------------------------------------
 291 | Returns the result of converting the canonical NaN `a' to the single-
 292 | precision floating-point format.
 293 *----------------------------------------------------------------------------*/
 294
 295 static float32 commonNaNToFloat32( commonNaNT a STATUS_PARAM)
 296 {
 297     uint32_t mantissa = a.high>>41;
 298
 299     if ( STATUS(default_nan_mode) ) {
 300         return float32_default_nan;
 301     }
 302
 303     if ( mantissa )
 304         return make_float32(
 305             ( ( (uint32_t) a.sign )<<31 ) | 0x7F800000 | ( a.high>>41 ) );
 306     else
 307         return float32_default_nan;
 308 }
 309
 310 /*----------------------------------------------------------------------------
 311 | Select which NaN to propagate for a two-input operation.
 312 | IEEE754 doesn't specify all the details of this, so the
 313 | algorithm is target-specific.
 314 | The routine is passed various bits of information about the
 315 | two NaNs and should return 0 to select NaN a and 1 for NaN b.
 316 | Note that signalling NaNs are always squashed to quiet NaNs
 317 | by the caller, by calling floatXX_maybe_silence_nan() before
 318 | returning them.
 319 |
 320 | aIsLargerSignificand is only valid if both a and b are NaNs
 321 | of some kind, and is true if a has the larger significand,
 322 | or if both a and b have the same significand but a is
 323 | positive but b is negative. It is only needed for the x87
 324 | tie-break rule.
 325 *----------------------------------------------------------------------------*/
 326
 327 #if defined(TARGET_ARM)
 328 static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
 329                     flag aIsLargerSignificand)
 330 {
 331     /* ARM mandated NaN propagation rules: take the first of:
 332      *  1. A if it is signaling
 333      *  2. B if it is signaling
 334      *  3. A (quiet)
 335      *  4. B (quiet)
 336      * A signaling NaN is always quietened before returning it.
 337      */
 338     if (aIsSNaN) {
 339         return 0;
 340     } else if (bIsSNaN) {
 341         return 1;
 342     } else if (aIsQNaN) {
 343         return 0;
 344     } else {
 345         return 1;
 346     }
 347 }
 348 #elif defined(TARGET_MIPS)
 349 static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
 350                     flag aIsLargerSignificand)
 351 {
 352     /* According to MIPS specifications, if one of the two operands is
 353      * a sNaN, a new qNaN has to be generated. This is done in
 354      * floatXX_maybe_silence_nan(). For qNaN inputs the specifications
 355      * says: "When possible, this QNaN result is one of the operand QNaN
 356      * values." In practice it seems that most implementations choose
 357      * the first operand if both operands are qNaN. In short this gives
 358      * the following rules:
 359      *  1. A if it is signaling
 360      *  2. B if it is signaling
 361      *  3. A (quiet)
 362      *  4. B (quiet)
 363      * A signaling NaN is always silenced before returning it.
 364      */
 365     if (aIsSNaN) {
 366         return 0;
 367     } else if (bIsSNaN) {
 368         return 1;
 369     } else if (aIsQNaN) {
 370         return 0;
 371     } else {
 372         return 1;
 373     }
 374 }
 375 #elif defined(TARGET_PPC)
 376 static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
 377                    flag aIsLargerSignificand)
 378 {
 379     /* PowerPC propagation rules:
 380      *  1. A if it sNaN or qNaN
 381      *  2. B if it sNaN or qNaN
 382      * A signaling NaN is always silenced before returning it.
 383      */
 384     if (aIsSNaN || aIsQNaN) {
 385         return 0;
 386     } else {
 387         return 1;
 388     }
 389 }
 390 #else
 391 static int pickNaN(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
 392                     flag aIsLargerSignificand)
 393 {
 394     /* This implements x87 NaN propagation rules:
 395      * SNaN + QNaN => return the QNaN
 396      * two SNaNs => return the one with the larger significand, silenced
 397      * two QNaNs => return the one with the larger significand
 398      * SNaN and a non-NaN => return the SNaN, silenced
 399      * QNaN and a non-NaN => return the QNaN
 400      *
 401      * If we get down to comparing significands and they are the same,
 402      * return the NaN with the positive sign bit (if any).
 403      */
 404     if (aIsSNaN) {
 405         if (bIsSNaN) {
 406             return aIsLargerSignificand ? 0 : 1;
 407         }
 408         return bIsQNaN ? 1 : 0;
 409     }
 410     else if (aIsQNaN) {
 411         if (bIsSNaN || !bIsQNaN)
 412             return 0;
 413         else {
 414             return aIsLargerSignificand ? 0 : 1;
 415         }
 416     } else {
 417         return 1;
 418     }
 419 }
 420 #endif
 421
 422 /*----------------------------------------------------------------------------
 423 | Select which NaN to propagate for a three-input operation.
 424 | For the moment we assume that no CPU needs the 'larger significand'
 425 | information.
 426 | Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN
 427 *----------------------------------------------------------------------------*/
 428 #if defined(TARGET_ARM)
 429 static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
 430                          flag cIsQNaN, flag cIsSNaN, flag infzero STATUS_PARAM)
 431 {
 432     /* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns
 433      * the default NaN
 434      */
 435     if (infzero && cIsQNaN) {
 436         float_raise(float_flag_invalid STATUS_VAR);
 437         return 3;
 438     }
 439
 440     /* This looks different from the ARM ARM pseudocode, because the ARM ARM
 441      * puts the operands to a fused mac operation (a*b)+c in the order c,a,b.
 442      */
 443     if (cIsSNaN) {
 444         return 2;
 445     } else if (aIsSNaN) {
 446         return 0;
 447     } else if (bIsSNaN) {
 448         return 1;
 449     } else if (cIsQNaN) {
 450         return 2;
 451     } else if (aIsQNaN) {
 452         return 0;
 453     } else {
 454         return 1;
 455     }
 456 }
 457 #elif defined(TARGET_PPC)
 458 static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
 459                          flag cIsQNaN, flag cIsSNaN, flag infzero STATUS_PARAM)
 460 {
 461     /* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer
 462      * to return an input NaN if we have one (ie c) rather than generating
 463      * a default NaN
 464      */
 465     if (infzero) {
 466         float_raise(float_flag_invalid STATUS_VAR);
 467         return 2;
 468     }
 469
 470     /* If fRA is a NaN return it; otherwise if fRB is a NaN return it;
 471      * otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB
 472      */
 473     if (aIsSNaN || aIsQNaN) {
 474         return 0;
 475     } else if (cIsSNaN || cIsQNaN) {
 476         return 2;
 477     } else {
 478         return 1;
 479     }
 480 }
 481 #else
 482 /* A default implementation: prefer a to b to c.
 483  * This is unlikely to actually match any real implementation.
 484  */
 485 static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
 486                          flag cIsQNaN, flag cIsSNaN, flag infzero STATUS_PARAM)
 487 {
 488     if (aIsSNaN || aIsQNaN) {
 489         return 0;
 490     } else if (bIsSNaN || bIsQNaN) {
 491         return 1;
 492     } else {
 493         return 2;
 494     }
 495 }
 496 #endif
 497
 498 /*----------------------------------------------------------------------------
 499 | Takes two single-precision floating-point values `a' and `b', one of which
 500 | is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
 501 | signaling NaN, the invalid exception is raised.
 502 *----------------------------------------------------------------------------*/
 503
 504 static float32 propagateFloat32NaN( float32 a, float32 b STATUS_PARAM)
 505 {
 506     flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
 507     flag aIsLargerSignificand;
 508     uint32_t av, bv;
 509
 510     aIsQuietNaN = float32_is_quiet_nan( a );
 511     aIsSignalingNaN = float32_is_signaling_nan( a );
 512     bIsQuietNaN = float32_is_quiet_nan( b );
 513     bIsSignalingNaN = float32_is_signaling_nan( b );
 514     av = float32_val(a);
 515     bv = float32_val(b);
 516
 517     if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
 518
 519     if ( STATUS(default_nan_mode) )
 520         return float32_default_nan;
 521
 522     if ((uint32_t)(av<<1) < (uint32_t)(bv<<1)) {
 523         aIsLargerSignificand = 0;
 524     } else if ((uint32_t)(bv<<1) < (uint32_t)(av<<1)) {
 525         aIsLargerSignificand = 1;
 526     } else {
 527         aIsLargerSignificand = (av < bv) ? 1 : 0;
 528     }
 529
 530     if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
 531                 aIsLargerSignificand)) {
 532         return float32_maybe_silence_nan(b);
 533     } else {
 534         return float32_maybe_silence_nan(a);
 535     }
 536 }
 537
 538 /*----------------------------------------------------------------------------
 539 | Takes three single-precision floating-point values `a', `b' and `c', one of
 540 | which is a NaN, and returns the appropriate NaN result.  If any of  `a',
 541 | `b' or `c' is a signaling NaN, the invalid exception is raised.
 542 | The input infzero indicates whether a*b was 0*inf or inf*0 (in which case
 543 | obviously c is a NaN, and whether to propagate c or some other NaN is
 544 | implementation defined).
 545 *----------------------------------------------------------------------------*/
 546
 547 static float32 propagateFloat32MulAddNaN(float32 a, float32 b,
 548                                          float32 c, flag infzero STATUS_PARAM)
 549 {
 550     flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
 551         cIsQuietNaN, cIsSignalingNaN;
 552     int which;
 553
 554     aIsQuietNaN = float32_is_quiet_nan(a);
 555     aIsSignalingNaN = float32_is_signaling_nan(a);
 556     bIsQuietNaN = float32_is_quiet_nan(b);
 557     bIsSignalingNaN = float32_is_signaling_nan(b);
 558     cIsQuietNaN = float32_is_quiet_nan(c);
 559     cIsSignalingNaN = float32_is_signaling_nan(c);
 560
 561     if (aIsSignalingNaN | bIsSignalingNaN | cIsSignalingNaN) {
 562         float_raise(float_flag_invalid STATUS_VAR);
 563     }
 564
 565     which = pickNaNMulAdd(aIsQuietNaN, aIsSignalingNaN,
 566                           bIsQuietNaN, bIsSignalingNaN,
 567                           cIsQuietNaN, cIsSignalingNaN, infzero STATUS_VAR);
 568
 569     if (STATUS(default_nan_mode)) {
 570         /* Note that this check is after pickNaNMulAdd so that function
 571          * has an opportunity to set the Invalid flag.
 572          */
 573         return float32_default_nan;
 574     }
 575
 576     switch (which) {
 577     case 0:
 578         return float32_maybe_silence_nan(a);
 579     case 1:
 580         return float32_maybe_silence_nan(b);
 581     case 2:
 582         return float32_maybe_silence_nan(c);
 583     case 3:
 584     default:
 585         return float32_default_nan;
 586     }
 587 }
 588
 589 /*----------------------------------------------------------------------------
 590 | Returns 1 if the double-precision floating-point value `a' is a quiet
 591 | NaN; otherwise returns 0.
 592 *----------------------------------------------------------------------------*/
 593
 594 int float64_is_quiet_nan( float64 a_ )
 595 {
 596     uint64_t a = float64_val(a_);
 597 #if SNAN_BIT_IS_ONE
 598     return
 599            ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
 600         && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
 601 #else
 602     return ( LIT64( 0xFFF0000000000000 ) <= (uint64_t) ( a<<1 ) );
 603 #endif
 604 }
 605
 606 /*----------------------------------------------------------------------------
 607 | Returns 1 if the double-precision floating-point value `a' is a signaling
 608 | NaN; otherwise returns 0.
 609 *----------------------------------------------------------------------------*/
 610
 611 int float64_is_signaling_nan( float64 a_ )
 612 {
 613     uint64_t a = float64_val(a_);
 614 #if SNAN_BIT_IS_ONE
 615     return ( LIT64( 0xFFF0000000000000 ) <= (uint64_t) ( a<<1 ) );
 616 #else
 617     return
 618            ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
 619         && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
 620 #endif
 621 }
 622
 623 /*----------------------------------------------------------------------------
 624 | Returns a quiet NaN if the double-precision floating point value `a' is a
 625 | signaling NaN; otherwise returns `a'.
 626 *----------------------------------------------------------------------------*/
 627
 628 float64 float64_maybe_silence_nan( float64 a_ )
 629 {
 630     if (float64_is_signaling_nan(a_)) {
 631 #if SNAN_BIT_IS_ONE
 632 #  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
 633         return float64_default_nan;
 634 #  else
 635 #    error Rules for silencing a signaling NaN are target-specific
 636 #  endif
 637 #else
 638         uint64_t a = float64_val(a_);
 639         a |= LIT64( 0x0008000000000000 );
 640         return make_float64(a);
 641 #endif
 642     }
 643     return a_;
 644 }
 645
 646 /*----------------------------------------------------------------------------
 647 | Returns the result of converting the double-precision floating-point NaN
 648 | `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
 649 | exception is raised.
 650 *----------------------------------------------------------------------------*/
 651
 652 static commonNaNT float64ToCommonNaN( float64 a STATUS_PARAM)
 653 {
 654     commonNaNT z;
 655
 656     if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR);
 657     z.sign = float64_val(a)>>63;
 658     z.low = 0;
 659     z.high = float64_val(a)<<12;
 660     return z;
 661 }
 662
 663 /*----------------------------------------------------------------------------
 664 | Returns the result of converting the canonical NaN `a' to the double-
 665 | precision floating-point format.
 666 *----------------------------------------------------------------------------*/
 667
 668 static float64 commonNaNToFloat64( commonNaNT a STATUS_PARAM)
 669 {
 670     uint64_t mantissa = a.high>>12;
 671
 672     if ( STATUS(default_nan_mode) ) {
 673         return float64_default_nan;
 674     }
 675
 676     if ( mantissa )
 677         return make_float64(
 678               ( ( (uint64_t) a.sign )<<63 )
 679             | LIT64( 0x7FF0000000000000 )
 680             | ( a.high>>12 ));
 681     else
 682         return float64_default_nan;
 683 }
 684
 685 /*----------------------------------------------------------------------------
 686 | Takes two double-precision floating-point values `a' and `b', one of which
 687 | is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
 688 | signaling NaN, the invalid exception is raised.
 689 *----------------------------------------------------------------------------*/
 690
 691 static float64 propagateFloat64NaN( float64 a, float64 b STATUS_PARAM)
 692 {
 693     flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
 694     flag aIsLargerSignificand;
 695     uint64_t av, bv;
 696
 697     aIsQuietNaN = float64_is_quiet_nan( a );
 698     aIsSignalingNaN = float64_is_signaling_nan( a );
 699     bIsQuietNaN = float64_is_quiet_nan( b );
 700     bIsSignalingNaN = float64_is_signaling_nan( b );
 701     av = float64_val(a);
 702     bv = float64_val(b);
 703
 704     if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
 705
 706     if ( STATUS(default_nan_mode) )
 707         return float64_default_nan;
 708
 709     if ((uint64_t)(av<<1) < (uint64_t)(bv<<1)) {
 710         aIsLargerSignificand = 0;
 711     } else if ((uint64_t)(bv<<1) < (uint64_t)(av<<1)) {
 712         aIsLargerSignificand = 1;
 713     } else {
 714         aIsLargerSignificand = (av < bv) ? 1 : 0;
 715     }
 716
 717     if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
 718                 aIsLargerSignificand)) {
 719         return float64_maybe_silence_nan(b);
 720     } else {
 721         return float64_maybe_silence_nan(a);
 722     }
 723 }
 724
 725 /*----------------------------------------------------------------------------
 726 | Takes three double-precision floating-point values `a', `b' and `c', one of
 727 | which is a NaN, and returns the appropriate NaN result.  If any of  `a',
 728 | `b' or `c' is a signaling NaN, the invalid exception is raised.
 729 | The input infzero indicates whether a*b was 0*inf or inf*0 (in which case
 730 | obviously c is a NaN, and whether to propagate c or some other NaN is
 731 | implementation defined).
 732 *----------------------------------------------------------------------------*/
 733
 734 static float64 propagateFloat64MulAddNaN(float64 a, float64 b,
 735                                          float64 c, flag infzero STATUS_PARAM)
 736 {
 737     flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
 738         cIsQuietNaN, cIsSignalingNaN;
 739     int which;
 740
 741     aIsQuietNaN = float64_is_quiet_nan(a);
 742     aIsSignalingNaN = float64_is_signaling_nan(a);
 743     bIsQuietNaN = float64_is_quiet_nan(b);
 744     bIsSignalingNaN = float64_is_signaling_nan(b);
 745     cIsQuietNaN = float64_is_quiet_nan(c);
 746     cIsSignalingNaN = float64_is_signaling_nan(c);
 747
 748     if (aIsSignalingNaN | bIsSignalingNaN | cIsSignalingNaN) {
 749         float_raise(float_flag_invalid STATUS_VAR);
 750     }
 751
 752     which = pickNaNMulAdd(aIsQuietNaN, aIsSignalingNaN,
 753                           bIsQuietNaN, bIsSignalingNaN,
 754                           cIsQuietNaN, cIsSignalingNaN, infzero STATUS_VAR);
 755
 756     if (STATUS(default_nan_mode)) {
 757         /* Note that this check is after pickNaNMulAdd so that function
 758          * has an opportunity to set the Invalid flag.
 759          */
 760         return float64_default_nan;
 761     }
 762
 763     switch (which) {
 764     case 0:
 765         return float64_maybe_silence_nan(a);
 766     case 1:
 767         return float64_maybe_silence_nan(b);
 768     case 2:
 769         return float64_maybe_silence_nan(c);
 770     case 3:
 771     default:
 772         return float64_default_nan;
 773     }
 774 }
 775
 776 /*----------------------------------------------------------------------------
 777 | Returns 1 if the extended double-precision floating-point value `a' is a
 778 | quiet NaN; otherwise returns 0. This slightly differs from the same
 779 | function for other types as floatx80 has an explicit bit.
 780 *----------------------------------------------------------------------------*/
 781
 782 int floatx80_is_quiet_nan( floatx80 a )
 783 {
 784 #if SNAN_BIT_IS_ONE
 785     uint64_t aLow;
 786
 787     aLow = a.low & ~ LIT64( 0x4000000000000000 );
 788     return
 789            ( ( a.high & 0x7FFF ) == 0x7FFF )
 790         && (uint64_t) ( aLow<<1 )
 791         && ( a.low == aLow );
 792 #else
 793     return ( ( a.high & 0x7FFF ) == 0x7FFF )
 794         && (LIT64( 0x8000000000000000 ) <= ((uint64_t) ( a.low<<1 )));
 795 #endif
 796 }
 797
 798 /*----------------------------------------------------------------------------
 799 | Returns 1 if the extended double-precision floating-point value `a' is a
 800 | signaling NaN; otherwise returns 0. This slightly differs from the same
 801 | function for other types as floatx80 has an explicit bit.
 802 *----------------------------------------------------------------------------*/
 803
 804 int floatx80_is_signaling_nan( floatx80 a )
 805 {
 806 #if SNAN_BIT_IS_ONE
 807     return ( ( a.high & 0x7FFF ) == 0x7FFF )
 808         && (LIT64( 0x8000000000000000 ) <= ((uint64_t) ( a.low<<1 )));
 809 #else
 810     uint64_t aLow;
 811
 812     aLow = a.low & ~ LIT64( 0x4000000000000000 );
 813     return
 814            ( ( a.high & 0x7FFF ) == 0x7FFF )
 815         && (uint64_t) ( aLow<<1 )
 816         && ( a.low == aLow );
 817 #endif
 818 }
 819
 820 /*----------------------------------------------------------------------------
 821 | Returns a quiet NaN if the extended double-precision floating point value
 822 | `a' is a signaling NaN; otherwise returns `a'.
 823 *----------------------------------------------------------------------------*/
 824
 825 floatx80 floatx80_maybe_silence_nan( floatx80 a )
 826 {
 827     if (floatx80_is_signaling_nan(a)) {
 828 #if SNAN_BIT_IS_ONE
 829 #  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
 830         a.low = floatx80_default_nan_low;
 831         a.high = floatx80_default_nan_high;
 832 #  else
 833 #    error Rules for silencing a signaling NaN are target-specific
 834 #  endif
 835 #else
 836         a.low |= LIT64( 0xC000000000000000 );
 837         return a;
 838 #endif
 839     }
 840     return a;
 841 }
 842
 843 /*----------------------------------------------------------------------------
 844 | Returns the result of converting the extended double-precision floating-
 845 | point NaN `a' to the canonical NaN format.  If `a' is a signaling NaN, the
 846 | invalid exception is raised.
 847 *----------------------------------------------------------------------------*/
 848
 849 static commonNaNT floatx80ToCommonNaN( floatx80 a STATUS_PARAM)
 850 {
 851     commonNaNT z;
 852
 853     if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR);
 854     if ( a.low >> 63 ) {
 855         z.sign = a.high >> 15;
 856         z.low = 0;
 857         z.high = a.low << 1;
 858     } else {
 859         z.sign = floatx80_default_nan_high >> 15;
 860         z.low = 0;
 861         z.high = floatx80_default_nan_low << 1;
 862     }
 863     return z;
 864 }
 865
 866 /*----------------------------------------------------------------------------
 867 | Returns the result of converting the canonical NaN `a' to the extended
 868 | double-precision floating-point format.
 869 *----------------------------------------------------------------------------*/
 870
 871 static floatx80 commonNaNToFloatx80( commonNaNT a STATUS_PARAM)
 872 {
 873     floatx80 z;
 874
 875     if ( STATUS(default_nan_mode) ) {
 876         z.low = floatx80_default_nan_low;
 877         z.high = floatx80_default_nan_high;
 878         return z;
 879     }
 880
 881     if (a.high >> 1) {
 882         z.low = LIT64( 0x8000000000000000 ) | a.high >> 1;
 883         z.high = ( ( (uint16_t) a.sign )<<15 ) | 0x7FFF;
 884     } else {
 885         z.low = floatx80_default_nan_low;
 886         z.high = floatx80_default_nan_high;
 887     }
 888
 889     return z;
 890 }
 891
 892 /*----------------------------------------------------------------------------
 893 | Takes two extended double-precision floating-point values `a' and `b', one
 894 | of which is a NaN, and returns the appropriate NaN result.  If either `a' or
 895 | `b' is a signaling NaN, the invalid exception is raised.
 896 *----------------------------------------------------------------------------*/
 897
 898 static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b STATUS_PARAM)
 899 {
 900     flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
 901     flag aIsLargerSignificand;
 902
 903     aIsQuietNaN = floatx80_is_quiet_nan( a );
 904     aIsSignalingNaN = floatx80_is_signaling_nan( a );
 905     bIsQuietNaN = floatx80_is_quiet_nan( b );
 906     bIsSignalingNaN = floatx80_is_signaling_nan( b );
 907
 908     if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
 909
 910     if ( STATUS(default_nan_mode) ) {
 911         a.low = floatx80_default_nan_low;
 912         a.high = floatx80_default_nan_high;
 913         return a;
 914     }
 915
 916     if (a.low < b.low) {
 917         aIsLargerSignificand = 0;
 918     } else if (b.low < a.low) {
 919         aIsLargerSignificand = 1;
 920     } else {
 921         aIsLargerSignificand = (a.high < b.high) ? 1 : 0;
 922     }
 923
 924     if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
 925                 aIsLargerSignificand)) {
 926         return floatx80_maybe_silence_nan(b);
 927     } else {
 928         return floatx80_maybe_silence_nan(a);
 929     }
 930 }
 931
 932 /*----------------------------------------------------------------------------
 933 | Returns 1 if the quadruple-precision floating-point value `a' is a quiet
 934 | NaN; otherwise returns 0.
 935 *----------------------------------------------------------------------------*/
 936
 937 int float128_is_quiet_nan( float128 a )
 938 {
 939 #if SNAN_BIT_IS_ONE
 940     return
 941            ( ( ( a.high>>47 ) & 0xFFFF ) == 0xFFFE )
 942         && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) );
 943 #else
 944     return
 945            ( LIT64( 0xFFFE000000000000 ) <= (uint64_t) ( a.high<<1 ) )
 946         && ( a.low || ( a.high & LIT64( 0x0000FFFFFFFFFFFF ) ) );
 947 #endif
 948 }
 949
 950 /*----------------------------------------------------------------------------
 951 | Returns 1 if the quadruple-precision floating-point value `a' is a
 952 | signaling NaN; otherwise returns 0.
 953 *----------------------------------------------------------------------------*/
 954
 955 int float128_is_signaling_nan( float128 a )
 956 {
 957 #if SNAN_BIT_IS_ONE
 958     return
 959            ( LIT64( 0xFFFE000000000000 ) <= (uint64_t) ( a.high<<1 ) )
 960         && ( a.low || ( a.high & LIT64( 0x0000FFFFFFFFFFFF ) ) );
 961 #else
 962     return
 963            ( ( ( a.high>>47 ) & 0xFFFF ) == 0xFFFE )
 964         && ( a.low || ( a.high & LIT64( 0x00007FFFFFFFFFFF ) ) );
 965 #endif
 966 }
 967
 968 /*----------------------------------------------------------------------------
 969 | Returns a quiet NaN if the quadruple-precision floating point value `a' is
 970 | a signaling NaN; otherwise returns `a'.
 971 *----------------------------------------------------------------------------*/
 972
 973 float128 float128_maybe_silence_nan( float128 a )
 974 {
 975     if (float128_is_signaling_nan(a)) {
 976 #if SNAN_BIT_IS_ONE
 977 #  if defined(TARGET_MIPS) || defined(TARGET_SH4) || defined(TARGET_UNICORE32)
 978         a.low = float128_default_nan_low;
 979         a.high = float128_default_nan_high;
 980 #  else
 981 #    error Rules for silencing a signaling NaN are target-specific
 982 #  endif
 983 #else
 984         a.high |= LIT64( 0x0000800000000000 );
 985         return a;
 986 #endif
 987     }
 988     return a;
 989 }
 990
 991 /*----------------------------------------------------------------------------
 992 | Returns the result of converting the quadruple-precision floating-point NaN
 993 | `a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
 994 | exception is raised.
 995 *----------------------------------------------------------------------------*/
 996
 997 static commonNaNT float128ToCommonNaN( float128 a STATUS_PARAM)
 998 {
 999     commonNaNT z;
1000
1001     if ( float128_is_signaling_nan( a ) ) float_raise( float_flag_invalid STATUS_VAR);
1002     z.sign = a.high>>63;
1003     shortShift128Left( a.high, a.low, 16, &z.high, &z.low );
1004     return z;
1005 }
1006
1007 /*----------------------------------------------------------------------------
1008 | Returns the result of converting the canonical NaN `a' to the quadruple-
1009 | precision floating-point format.
1010 *----------------------------------------------------------------------------*/
1011
1012 static float128 commonNaNToFloat128( commonNaNT a STATUS_PARAM)
1013 {
1014     float128 z;
1015
1016     if ( STATUS(default_nan_mode) ) {
1017         z.low = float128_default_nan_low;
1018         z.high = float128_default_nan_high;
1019         return z;
1020     }
1021
1022     shift128Right( a.high, a.low, 16, &z.high, &z.low );
1023     z.high |= ( ( (uint64_t) a.sign )<<63 ) | LIT64( 0x7FFF000000000000 );
1024     return z;
1025 }
1026
1027 /*----------------------------------------------------------------------------
1028 | Takes two quadruple-precision floating-point values `a' and `b', one of
1029 | which is a NaN, and returns the appropriate NaN result.  If either `a' or
1030 | `b' is a signaling NaN, the invalid exception is raised.
1031 *----------------------------------------------------------------------------*/
1032
1033 static float128 propagateFloat128NaN( float128 a, float128 b STATUS_PARAM)
1034 {
1035     flag aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN;
1036     flag aIsLargerSignificand;
1037
1038     aIsQuietNaN = float128_is_quiet_nan( a );
1039     aIsSignalingNaN = float128_is_signaling_nan( a );
1040     bIsQuietNaN = float128_is_quiet_nan( b );
1041     bIsSignalingNaN = float128_is_signaling_nan( b );
1042
1043     if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid STATUS_VAR);
1044
1045     if ( STATUS(default_nan_mode) ) {
1046         a.low = float128_default_nan_low;
1047         a.high = float128_default_nan_high;
1048         return a;
1049     }
1050
1051     if (lt128(a.high<<1, a.low, b.high<<1, b.low)) {
1052         aIsLargerSignificand = 0;
1053     } else if (lt128(b.high<<1, b.low, a.high<<1, a.low)) {
1054         aIsLargerSignificand = 1;
1055     } else {
1056         aIsLargerSignificand = (a.high < b.high) ? 1 : 0;
1057     }
1058
1059     if (pickNaN(aIsQuietNaN, aIsSignalingNaN, bIsQuietNaN, bIsSignalingNaN,
1060                 aIsLargerSignificand)) {
1061         return float128_maybe_silence_nan(b);
1062     } else {
1063         return float128_maybe_silence_nan(a);
1064     }
1065 }
1066