ppc/pnv: Link "chip" property to PnvCore::chip pointer
[qemu/ar7.git] / hw / rtc / mc146818rtc.c
blob74ae74bc5cd1dad5b45b2f95748969b372161864
1 /*
2 * QEMU MC146818 RTC emulation
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
25 #include "qemu/osdep.h"
26 #include "qemu-common.h"
27 #include "qemu/cutils.h"
28 #include "qemu/module.h"
29 #include "qemu/bcd.h"
30 #include "hw/irq.h"
31 #include "hw/qdev-properties.h"
32 #include "qemu/timer.h"
33 #include "sysemu/sysemu.h"
34 #include "sysemu/replay.h"
35 #include "sysemu/reset.h"
36 #include "sysemu/runstate.h"
37 #include "hw/rtc/mc146818rtc.h"
38 #include "hw/rtc/mc146818rtc_regs.h"
39 #include "migration/vmstate.h"
40 #include "qapi/error.h"
41 #include "qapi/qapi-events-misc-target.h"
42 #include "qapi/visitor.h"
43 #include "exec/address-spaces.h"
44 #include "hw/rtc/mc146818rtc_regs.h"
46 #ifdef TARGET_I386
47 #include "qapi/qapi-commands-misc-target.h"
48 #include "hw/i386/apic.h"
49 #endif
51 //#define DEBUG_CMOS
52 //#define DEBUG_COALESCED
54 #ifdef DEBUG_CMOS
55 # define CMOS_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
56 #else
57 # define CMOS_DPRINTF(format, ...) do { } while (0)
58 #endif
60 #ifdef DEBUG_COALESCED
61 # define DPRINTF_C(format, ...) printf(format, ## __VA_ARGS__)
62 #else
63 # define DPRINTF_C(format, ...) do { } while (0)
64 #endif
66 #define SEC_PER_MIN 60
67 #define MIN_PER_HOUR 60
68 #define SEC_PER_HOUR 3600
69 #define HOUR_PER_DAY 24
70 #define SEC_PER_DAY 86400
72 #define RTC_REINJECT_ON_ACK_COUNT 20
73 #define RTC_CLOCK_RATE 32768
74 #define UIP_HOLD_LENGTH (8 * NANOSECONDS_PER_SECOND / 32768)
76 static void rtc_set_time(RTCState *s);
77 static void rtc_update_time(RTCState *s);
78 static void rtc_set_cmos(RTCState *s, const struct tm *tm);
79 static inline int rtc_from_bcd(RTCState *s, int a);
80 static uint64_t get_next_alarm(RTCState *s);
82 static inline bool rtc_running(RTCState *s)
84 return (!(s->cmos_data[RTC_REG_B] & REG_B_SET) &&
85 (s->cmos_data[RTC_REG_A] & 0x70) <= 0x20);
88 static uint64_t get_guest_rtc_ns(RTCState *s)
90 uint64_t guest_clock = qemu_clock_get_ns(rtc_clock);
92 return s->base_rtc * NANOSECONDS_PER_SECOND +
93 guest_clock - s->last_update + s->offset;
96 static void rtc_coalesced_timer_update(RTCState *s)
98 if (s->irq_coalesced == 0) {
99 timer_del(s->coalesced_timer);
100 } else {
101 /* divide each RTC interval to 2 - 8 smaller intervals */
102 int c = MIN(s->irq_coalesced, 7) + 1;
103 int64_t next_clock = qemu_clock_get_ns(rtc_clock) +
104 periodic_clock_to_ns(s->period / c);
105 timer_mod(s->coalesced_timer, next_clock);
109 static QLIST_HEAD(, RTCState) rtc_devices =
110 QLIST_HEAD_INITIALIZER(rtc_devices);
112 #ifdef TARGET_I386
113 void qmp_rtc_reset_reinjection(Error **errp)
115 RTCState *s;
117 QLIST_FOREACH(s, &rtc_devices, link) {
118 s->irq_coalesced = 0;
122 static bool rtc_policy_slew_deliver_irq(RTCState *s)
124 apic_reset_irq_delivered();
125 qemu_irq_raise(s->irq);
126 return apic_get_irq_delivered();
129 static void rtc_coalesced_timer(void *opaque)
131 RTCState *s = opaque;
133 if (s->irq_coalesced != 0) {
134 s->cmos_data[RTC_REG_C] |= 0xc0;
135 DPRINTF_C("cmos: injecting from timer\n");
136 if (rtc_policy_slew_deliver_irq(s)) {
137 s->irq_coalesced--;
138 DPRINTF_C("cmos: coalesced irqs decreased to %d\n",
139 s->irq_coalesced);
143 rtc_coalesced_timer_update(s);
145 #else
146 static bool rtc_policy_slew_deliver_irq(RTCState *s)
148 assert(0);
149 return false;
151 #endif
153 static uint32_t rtc_periodic_clock_ticks(RTCState *s)
155 int period_code;
157 if (!(s->cmos_data[RTC_REG_B] & REG_B_PIE)) {
158 return 0;
161 period_code = s->cmos_data[RTC_REG_A] & 0x0f;
163 return periodic_period_to_clock(period_code);
167 * handle periodic timer. @old_period indicates the periodic timer update
168 * is just due to period adjustment.
170 static void
171 periodic_timer_update(RTCState *s, int64_t current_time, uint32_t old_period, bool period_change)
173 uint32_t period;
174 int64_t cur_clock, next_irq_clock, lost_clock = 0;
176 period = rtc_periodic_clock_ticks(s);
177 s->period = period;
179 if (!period) {
180 s->irq_coalesced = 0;
181 timer_del(s->periodic_timer);
182 return;
185 /* compute 32 khz clock */
186 cur_clock =
187 muldiv64(current_time, RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
190 * if the periodic timer's update is due to period re-configuration,
191 * we should count the clock since last interrupt.
193 if (old_period && period_change) {
194 int64_t last_periodic_clock, next_periodic_clock;
196 next_periodic_clock = muldiv64(s->next_periodic_time,
197 RTC_CLOCK_RATE, NANOSECONDS_PER_SECOND);
198 last_periodic_clock = next_periodic_clock - old_period;
199 lost_clock = cur_clock - last_periodic_clock;
200 assert(lost_clock >= 0);
204 * s->irq_coalesced can change for two reasons:
206 * a) if one or more periodic timer interrupts have been lost,
207 * lost_clock will be more that a period.
209 * b) when the period may be reconfigured, we expect the OS to
210 * treat delayed tick as the new period. So, when switching
211 * from a shorter to a longer period, scale down the missing,
212 * because the OS will treat past delayed ticks as longer
213 * (leftovers are put back into lost_clock). When switching
214 * to a shorter period, scale up the missing ticks since the
215 * OS handler will treat past delayed ticks as shorter.
217 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
218 uint32_t old_irq_coalesced = s->irq_coalesced;
220 lost_clock += old_irq_coalesced * old_period;
221 s->irq_coalesced = lost_clock / s->period;
222 lost_clock %= s->period;
223 if (old_irq_coalesced != s->irq_coalesced ||
224 old_period != s->period) {
225 DPRINTF_C("cmos: coalesced irqs scaled from %d to %d, "
226 "period scaled from %d to %d\n", old_irq_coalesced,
227 s->irq_coalesced, old_period, s->period);
228 rtc_coalesced_timer_update(s);
230 } else {
232 * no way to compensate the interrupt if LOST_TICK_POLICY_SLEW
233 * is not used, we should make the time progress anyway.
235 lost_clock = MIN(lost_clock, period);
238 assert(lost_clock >= 0 && lost_clock <= period);
240 next_irq_clock = cur_clock + period - lost_clock;
241 s->next_periodic_time = periodic_clock_to_ns(next_irq_clock) + 1;
242 timer_mod(s->periodic_timer, s->next_periodic_time);
245 static void rtc_periodic_timer(void *opaque)
247 RTCState *s = opaque;
249 periodic_timer_update(s, s->next_periodic_time, s->period, false);
250 s->cmos_data[RTC_REG_C] |= REG_C_PF;
251 if (s->cmos_data[RTC_REG_B] & REG_B_PIE) {
252 s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
253 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
254 if (s->irq_reinject_on_ack_count >= RTC_REINJECT_ON_ACK_COUNT)
255 s->irq_reinject_on_ack_count = 0;
256 if (!rtc_policy_slew_deliver_irq(s)) {
257 s->irq_coalesced++;
258 rtc_coalesced_timer_update(s);
259 DPRINTF_C("cmos: coalesced irqs increased to %d\n",
260 s->irq_coalesced);
262 } else
263 qemu_irq_raise(s->irq);
267 /* handle update-ended timer */
268 static void check_update_timer(RTCState *s)
270 uint64_t next_update_time;
271 uint64_t guest_nsec;
272 int next_alarm_sec;
274 /* From the data sheet: "Holding the dividers in reset prevents
275 * interrupts from operating, while setting the SET bit allows"
276 * them to occur.
278 if ((s->cmos_data[RTC_REG_A] & 0x60) == 0x60) {
279 assert((s->cmos_data[RTC_REG_A] & REG_A_UIP) == 0);
280 timer_del(s->update_timer);
281 return;
284 guest_nsec = get_guest_rtc_ns(s) % NANOSECONDS_PER_SECOND;
285 next_update_time = qemu_clock_get_ns(rtc_clock)
286 + NANOSECONDS_PER_SECOND - guest_nsec;
288 /* Compute time of next alarm. One second is already accounted
289 * for in next_update_time.
291 next_alarm_sec = get_next_alarm(s);
292 s->next_alarm_time = next_update_time +
293 (next_alarm_sec - 1) * NANOSECONDS_PER_SECOND;
295 /* If update_in_progress latched the UIP bit, we must keep the timer
296 * programmed to the next second, so that UIP is cleared. Otherwise,
297 * if UF is already set, we might be able to optimize.
299 if (!(s->cmos_data[RTC_REG_A] & REG_A_UIP) &&
300 (s->cmos_data[RTC_REG_C] & REG_C_UF)) {
301 /* If AF cannot change (i.e. either it is set already, or
302 * SET=1 and then the time is not updated), nothing to do.
304 if ((s->cmos_data[RTC_REG_B] & REG_B_SET) ||
305 (s->cmos_data[RTC_REG_C] & REG_C_AF)) {
306 timer_del(s->update_timer);
307 return;
310 /* UF is set, but AF is clear. Program the timer to target
311 * the alarm time. */
312 next_update_time = s->next_alarm_time;
314 if (next_update_time != timer_expire_time_ns(s->update_timer)) {
315 timer_mod(s->update_timer, next_update_time);
319 static inline uint8_t convert_hour(RTCState *s, uint8_t hour)
321 if (!(s->cmos_data[RTC_REG_B] & REG_B_24H)) {
322 hour %= 12;
323 if (s->cmos_data[RTC_HOURS] & 0x80) {
324 hour += 12;
327 return hour;
330 static uint64_t get_next_alarm(RTCState *s)
332 int32_t alarm_sec, alarm_min, alarm_hour, cur_hour, cur_min, cur_sec;
333 int32_t hour, min, sec;
335 rtc_update_time(s);
337 alarm_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS_ALARM]);
338 alarm_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES_ALARM]);
339 alarm_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS_ALARM]);
340 alarm_hour = alarm_hour == -1 ? -1 : convert_hour(s, alarm_hour);
342 cur_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS]);
343 cur_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES]);
344 cur_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS]);
345 cur_hour = convert_hour(s, cur_hour);
347 if (alarm_hour == -1) {
348 alarm_hour = cur_hour;
349 if (alarm_min == -1) {
350 alarm_min = cur_min;
351 if (alarm_sec == -1) {
352 alarm_sec = cur_sec + 1;
353 } else if (cur_sec > alarm_sec) {
354 alarm_min++;
356 } else if (cur_min == alarm_min) {
357 if (alarm_sec == -1) {
358 alarm_sec = cur_sec + 1;
359 } else {
360 if (cur_sec > alarm_sec) {
361 alarm_hour++;
364 if (alarm_sec == SEC_PER_MIN) {
365 /* wrap to next hour, minutes is not in don't care mode */
366 alarm_sec = 0;
367 alarm_hour++;
369 } else if (cur_min > alarm_min) {
370 alarm_hour++;
372 } else if (cur_hour == alarm_hour) {
373 if (alarm_min == -1) {
374 alarm_min = cur_min;
375 if (alarm_sec == -1) {
376 alarm_sec = cur_sec + 1;
377 } else if (cur_sec > alarm_sec) {
378 alarm_min++;
381 if (alarm_sec == SEC_PER_MIN) {
382 alarm_sec = 0;
383 alarm_min++;
385 /* wrap to next day, hour is not in don't care mode */
386 alarm_min %= MIN_PER_HOUR;
387 } else if (cur_min == alarm_min) {
388 if (alarm_sec == -1) {
389 alarm_sec = cur_sec + 1;
391 /* wrap to next day, hours+minutes not in don't care mode */
392 alarm_sec %= SEC_PER_MIN;
396 /* values that are still don't care fire at the next min/sec */
397 if (alarm_min == -1) {
398 alarm_min = 0;
400 if (alarm_sec == -1) {
401 alarm_sec = 0;
404 /* keep values in range */
405 if (alarm_sec == SEC_PER_MIN) {
406 alarm_sec = 0;
407 alarm_min++;
409 if (alarm_min == MIN_PER_HOUR) {
410 alarm_min = 0;
411 alarm_hour++;
413 alarm_hour %= HOUR_PER_DAY;
415 hour = alarm_hour - cur_hour;
416 min = hour * MIN_PER_HOUR + alarm_min - cur_min;
417 sec = min * SEC_PER_MIN + alarm_sec - cur_sec;
418 return sec <= 0 ? sec + SEC_PER_DAY : sec;
421 static void rtc_update_timer(void *opaque)
423 RTCState *s = opaque;
424 int32_t irqs = REG_C_UF;
425 int32_t new_irqs;
427 assert((s->cmos_data[RTC_REG_A] & 0x60) != 0x60);
429 /* UIP might have been latched, update time and clear it. */
430 rtc_update_time(s);
431 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
433 if (qemu_clock_get_ns(rtc_clock) >= s->next_alarm_time) {
434 irqs |= REG_C_AF;
435 if (s->cmos_data[RTC_REG_B] & REG_B_AIE) {
436 qemu_system_wakeup_request(QEMU_WAKEUP_REASON_RTC, NULL);
440 new_irqs = irqs & ~s->cmos_data[RTC_REG_C];
441 s->cmos_data[RTC_REG_C] |= irqs;
442 if ((new_irqs & s->cmos_data[RTC_REG_B]) != 0) {
443 s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
444 qemu_irq_raise(s->irq);
446 check_update_timer(s);
449 static void cmos_ioport_write(void *opaque, hwaddr addr,
450 uint64_t data, unsigned size)
452 RTCState *s = opaque;
453 uint32_t old_period;
454 bool update_periodic_timer;
456 if ((addr & 1) == 0) {
457 s->cmos_index = data & 0x7f;
458 } else {
459 CMOS_DPRINTF("cmos: write index=0x%02x val=0x%02" PRIx64 "\n",
460 s->cmos_index, data);
461 switch(s->cmos_index) {
462 case RTC_SECONDS_ALARM:
463 case RTC_MINUTES_ALARM:
464 case RTC_HOURS_ALARM:
465 s->cmos_data[s->cmos_index] = data;
466 check_update_timer(s);
467 break;
468 case RTC_IBM_PS2_CENTURY_BYTE:
469 s->cmos_index = RTC_CENTURY;
470 /* fall through */
471 case RTC_CENTURY:
472 case RTC_SECONDS:
473 case RTC_MINUTES:
474 case RTC_HOURS:
475 case RTC_DAY_OF_WEEK:
476 case RTC_DAY_OF_MONTH:
477 case RTC_MONTH:
478 case RTC_YEAR:
479 s->cmos_data[s->cmos_index] = data;
480 /* if in set mode, do not update the time */
481 if (rtc_running(s)) {
482 rtc_set_time(s);
483 check_update_timer(s);
485 break;
486 case RTC_REG_A:
487 update_periodic_timer = (s->cmos_data[RTC_REG_A] ^ data) & 0x0f;
488 old_period = rtc_periodic_clock_ticks(s);
490 if ((data & 0x60) == 0x60) {
491 if (rtc_running(s)) {
492 rtc_update_time(s);
494 /* What happens to UIP when divider reset is enabled is
495 * unclear from the datasheet. Shouldn't matter much
496 * though.
498 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
499 } else if (((s->cmos_data[RTC_REG_A] & 0x60) == 0x60) &&
500 (data & 0x70) <= 0x20) {
501 /* when the divider reset is removed, the first update cycle
502 * begins one-half second later*/
503 if (!(s->cmos_data[RTC_REG_B] & REG_B_SET)) {
504 s->offset = 500000000;
505 rtc_set_time(s);
507 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
509 /* UIP bit is read only */
510 s->cmos_data[RTC_REG_A] = (data & ~REG_A_UIP) |
511 (s->cmos_data[RTC_REG_A] & REG_A_UIP);
513 if (update_periodic_timer) {
514 periodic_timer_update(s, qemu_clock_get_ns(rtc_clock),
515 old_period, true);
518 check_update_timer(s);
519 break;
520 case RTC_REG_B:
521 update_periodic_timer = (s->cmos_data[RTC_REG_B] ^ data)
522 & REG_B_PIE;
523 old_period = rtc_periodic_clock_ticks(s);
525 if (data & REG_B_SET) {
526 /* update cmos to when the rtc was stopping */
527 if (rtc_running(s)) {
528 rtc_update_time(s);
530 /* set mode: reset UIP mode */
531 s->cmos_data[RTC_REG_A] &= ~REG_A_UIP;
532 data &= ~REG_B_UIE;
533 } else {
534 /* if disabling set mode, update the time */
535 if ((s->cmos_data[RTC_REG_B] & REG_B_SET) &&
536 (s->cmos_data[RTC_REG_A] & 0x70) <= 0x20) {
537 s->offset = get_guest_rtc_ns(s) % NANOSECONDS_PER_SECOND;
538 rtc_set_time(s);
541 /* if an interrupt flag is already set when the interrupt
542 * becomes enabled, raise an interrupt immediately. */
543 if (data & s->cmos_data[RTC_REG_C] & REG_C_MASK) {
544 s->cmos_data[RTC_REG_C] |= REG_C_IRQF;
545 qemu_irq_raise(s->irq);
546 } else {
547 s->cmos_data[RTC_REG_C] &= ~REG_C_IRQF;
548 qemu_irq_lower(s->irq);
550 s->cmos_data[RTC_REG_B] = data;
552 if (update_periodic_timer) {
553 periodic_timer_update(s, qemu_clock_get_ns(rtc_clock),
554 old_period, true);
557 check_update_timer(s);
558 break;
559 case RTC_REG_C:
560 case RTC_REG_D:
561 /* cannot write to them */
562 break;
563 default:
564 s->cmos_data[s->cmos_index] = data;
565 break;
570 static inline int rtc_to_bcd(RTCState *s, int a)
572 if (s->cmos_data[RTC_REG_B] & REG_B_DM) {
573 return a;
574 } else {
575 return ((a / 10) << 4) | (a % 10);
579 static inline int rtc_from_bcd(RTCState *s, int a)
581 if ((a & 0xc0) == 0xc0) {
582 return -1;
584 if (s->cmos_data[RTC_REG_B] & REG_B_DM) {
585 return a;
586 } else {
587 return ((a >> 4) * 10) + (a & 0x0f);
591 static void rtc_get_time(RTCState *s, struct tm *tm)
593 tm->tm_sec = rtc_from_bcd(s, s->cmos_data[RTC_SECONDS]);
594 tm->tm_min = rtc_from_bcd(s, s->cmos_data[RTC_MINUTES]);
595 tm->tm_hour = rtc_from_bcd(s, s->cmos_data[RTC_HOURS] & 0x7f);
596 if (!(s->cmos_data[RTC_REG_B] & REG_B_24H)) {
597 tm->tm_hour %= 12;
598 if (s->cmos_data[RTC_HOURS] & 0x80) {
599 tm->tm_hour += 12;
602 tm->tm_wday = rtc_from_bcd(s, s->cmos_data[RTC_DAY_OF_WEEK]) - 1;
603 tm->tm_mday = rtc_from_bcd(s, s->cmos_data[RTC_DAY_OF_MONTH]);
604 tm->tm_mon = rtc_from_bcd(s, s->cmos_data[RTC_MONTH]) - 1;
605 tm->tm_year =
606 rtc_from_bcd(s, s->cmos_data[RTC_YEAR]) + s->base_year +
607 rtc_from_bcd(s, s->cmos_data[RTC_CENTURY]) * 100 - 1900;
610 static void rtc_set_time(RTCState *s)
612 struct tm tm;
614 rtc_get_time(s, &tm);
615 s->base_rtc = mktimegm(&tm);
616 s->last_update = qemu_clock_get_ns(rtc_clock);
618 qapi_event_send_rtc_change(qemu_timedate_diff(&tm));
621 static void rtc_set_cmos(RTCState *s, const struct tm *tm)
623 int year;
625 s->cmos_data[RTC_SECONDS] = rtc_to_bcd(s, tm->tm_sec);
626 s->cmos_data[RTC_MINUTES] = rtc_to_bcd(s, tm->tm_min);
627 if (s->cmos_data[RTC_REG_B] & REG_B_24H) {
628 /* 24 hour format */
629 s->cmos_data[RTC_HOURS] = rtc_to_bcd(s, tm->tm_hour);
630 } else {
631 /* 12 hour format */
632 int h = (tm->tm_hour % 12) ? tm->tm_hour % 12 : 12;
633 s->cmos_data[RTC_HOURS] = rtc_to_bcd(s, h);
634 if (tm->tm_hour >= 12)
635 s->cmos_data[RTC_HOURS] |= 0x80;
637 s->cmos_data[RTC_DAY_OF_WEEK] = rtc_to_bcd(s, tm->tm_wday + 1);
638 s->cmos_data[RTC_DAY_OF_MONTH] = rtc_to_bcd(s, tm->tm_mday);
639 s->cmos_data[RTC_MONTH] = rtc_to_bcd(s, tm->tm_mon + 1);
640 year = tm->tm_year + 1900 - s->base_year;
641 s->cmos_data[RTC_YEAR] = rtc_to_bcd(s, year % 100);
642 s->cmos_data[RTC_CENTURY] = rtc_to_bcd(s, year / 100);
645 static void rtc_update_time(RTCState *s)
647 struct tm ret;
648 time_t guest_sec;
649 int64_t guest_nsec;
651 guest_nsec = get_guest_rtc_ns(s);
652 guest_sec = guest_nsec / NANOSECONDS_PER_SECOND;
653 gmtime_r(&guest_sec, &ret);
655 /* Is SET flag of Register B disabled? */
656 if ((s->cmos_data[RTC_REG_B] & REG_B_SET) == 0) {
657 rtc_set_cmos(s, &ret);
661 static int update_in_progress(RTCState *s)
663 int64_t guest_nsec;
665 if (!rtc_running(s)) {
666 return 0;
668 if (timer_pending(s->update_timer)) {
669 int64_t next_update_time = timer_expire_time_ns(s->update_timer);
670 /* Latch UIP until the timer expires. */
671 if (qemu_clock_get_ns(rtc_clock) >=
672 (next_update_time - UIP_HOLD_LENGTH)) {
673 s->cmos_data[RTC_REG_A] |= REG_A_UIP;
674 return 1;
678 guest_nsec = get_guest_rtc_ns(s);
679 /* UIP bit will be set at last 244us of every second. */
680 if ((guest_nsec % NANOSECONDS_PER_SECOND) >=
681 (NANOSECONDS_PER_SECOND - UIP_HOLD_LENGTH)) {
682 return 1;
684 return 0;
687 static uint64_t cmos_ioport_read(void *opaque, hwaddr addr,
688 unsigned size)
690 RTCState *s = opaque;
691 int ret;
692 if ((addr & 1) == 0) {
693 return 0xff;
694 } else {
695 switch(s->cmos_index) {
696 case RTC_IBM_PS2_CENTURY_BYTE:
697 s->cmos_index = RTC_CENTURY;
698 /* fall through */
699 case RTC_CENTURY:
700 case RTC_SECONDS:
701 case RTC_MINUTES:
702 case RTC_HOURS:
703 case RTC_DAY_OF_WEEK:
704 case RTC_DAY_OF_MONTH:
705 case RTC_MONTH:
706 case RTC_YEAR:
707 /* if not in set mode, calibrate cmos before
708 * reading*/
709 if (rtc_running(s)) {
710 rtc_update_time(s);
712 ret = s->cmos_data[s->cmos_index];
713 break;
714 case RTC_REG_A:
715 ret = s->cmos_data[s->cmos_index];
716 if (update_in_progress(s)) {
717 ret |= REG_A_UIP;
719 break;
720 case RTC_REG_C:
721 ret = s->cmos_data[s->cmos_index];
722 qemu_irq_lower(s->irq);
723 s->cmos_data[RTC_REG_C] = 0x00;
724 if (ret & (REG_C_UF | REG_C_AF)) {
725 check_update_timer(s);
728 if(s->irq_coalesced &&
729 (s->cmos_data[RTC_REG_B] & REG_B_PIE) &&
730 s->irq_reinject_on_ack_count < RTC_REINJECT_ON_ACK_COUNT) {
731 s->irq_reinject_on_ack_count++;
732 s->cmos_data[RTC_REG_C] |= REG_C_IRQF | REG_C_PF;
733 DPRINTF_C("cmos: injecting on ack\n");
734 if (rtc_policy_slew_deliver_irq(s)) {
735 s->irq_coalesced--;
736 DPRINTF_C("cmos: coalesced irqs decreased to %d\n",
737 s->irq_coalesced);
740 break;
741 default:
742 ret = s->cmos_data[s->cmos_index];
743 break;
745 CMOS_DPRINTF("cmos: read index=0x%02x val=0x%02x\n",
746 s->cmos_index, ret);
747 return ret;
751 void rtc_set_memory(ISADevice *dev, int addr, int val)
753 RTCState *s = MC146818_RTC(dev);
754 if (addr >= 0 && addr <= 127)
755 s->cmos_data[addr] = val;
758 int rtc_get_memory(ISADevice *dev, int addr)
760 RTCState *s = MC146818_RTC(dev);
761 assert(addr >= 0 && addr <= 127);
762 return s->cmos_data[addr];
765 static void rtc_set_date_from_host(ISADevice *dev)
767 RTCState *s = MC146818_RTC(dev);
768 struct tm tm;
770 qemu_get_timedate(&tm, 0);
772 s->base_rtc = mktimegm(&tm);
773 s->last_update = qemu_clock_get_ns(rtc_clock);
774 s->offset = 0;
776 /* set the CMOS date */
777 rtc_set_cmos(s, &tm);
780 static int rtc_pre_save(void *opaque)
782 RTCState *s = opaque;
784 rtc_update_time(s);
786 return 0;
789 static int rtc_post_load(void *opaque, int version_id)
791 RTCState *s = opaque;
793 if (version_id <= 2 || rtc_clock == QEMU_CLOCK_REALTIME) {
794 rtc_set_time(s);
795 s->offset = 0;
796 check_update_timer(s);
798 s->period = rtc_periodic_clock_ticks(s);
800 /* The periodic timer is deterministic in record/replay mode,
801 * so there is no need to update it after loading the vmstate.
802 * Reading RTC here would misalign record and replay.
804 if (replay_mode == REPLAY_MODE_NONE) {
805 uint64_t now = qemu_clock_get_ns(rtc_clock);
806 if (now < s->next_periodic_time ||
807 now > (s->next_periodic_time + get_max_clock_jump())) {
808 periodic_timer_update(s, qemu_clock_get_ns(rtc_clock), s->period, false);
812 if (version_id >= 2) {
813 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
814 rtc_coalesced_timer_update(s);
817 return 0;
820 static bool rtc_irq_reinject_on_ack_count_needed(void *opaque)
822 RTCState *s = (RTCState *)opaque;
823 return s->irq_reinject_on_ack_count != 0;
826 static const VMStateDescription vmstate_rtc_irq_reinject_on_ack_count = {
827 .name = "mc146818rtc/irq_reinject_on_ack_count",
828 .version_id = 1,
829 .minimum_version_id = 1,
830 .needed = rtc_irq_reinject_on_ack_count_needed,
831 .fields = (VMStateField[]) {
832 VMSTATE_UINT16(irq_reinject_on_ack_count, RTCState),
833 VMSTATE_END_OF_LIST()
837 static const VMStateDescription vmstate_rtc = {
838 .name = "mc146818rtc",
839 .version_id = 3,
840 .minimum_version_id = 1,
841 .pre_save = rtc_pre_save,
842 .post_load = rtc_post_load,
843 .fields = (VMStateField[]) {
844 VMSTATE_BUFFER(cmos_data, RTCState),
845 VMSTATE_UINT8(cmos_index, RTCState),
846 VMSTATE_UNUSED(7*4),
847 VMSTATE_TIMER_PTR(periodic_timer, RTCState),
848 VMSTATE_INT64(next_periodic_time, RTCState),
849 VMSTATE_UNUSED(3*8),
850 VMSTATE_UINT32_V(irq_coalesced, RTCState, 2),
851 VMSTATE_UINT32_V(period, RTCState, 2),
852 VMSTATE_UINT64_V(base_rtc, RTCState, 3),
853 VMSTATE_UINT64_V(last_update, RTCState, 3),
854 VMSTATE_INT64_V(offset, RTCState, 3),
855 VMSTATE_TIMER_PTR_V(update_timer, RTCState, 3),
856 VMSTATE_UINT64_V(next_alarm_time, RTCState, 3),
857 VMSTATE_END_OF_LIST()
859 .subsections = (const VMStateDescription*[]) {
860 &vmstate_rtc_irq_reinject_on_ack_count,
861 NULL
865 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
866 BIOS will read it and start S3 resume at POST Entry */
867 static void rtc_notify_suspend(Notifier *notifier, void *data)
869 RTCState *s = container_of(notifier, RTCState, suspend_notifier);
870 rtc_set_memory(ISA_DEVICE(s), 0xF, 0xFE);
873 static void rtc_reset(void *opaque)
875 RTCState *s = opaque;
877 s->cmos_data[RTC_REG_B] &= ~(REG_B_PIE | REG_B_AIE | REG_B_SQWE);
878 s->cmos_data[RTC_REG_C] &= ~(REG_C_UF | REG_C_IRQF | REG_C_PF | REG_C_AF);
879 check_update_timer(s);
881 qemu_irq_lower(s->irq);
883 if (s->lost_tick_policy == LOST_TICK_POLICY_SLEW) {
884 s->irq_coalesced = 0;
885 s->irq_reinject_on_ack_count = 0;
889 static const MemoryRegionOps cmos_ops = {
890 .read = cmos_ioport_read,
891 .write = cmos_ioport_write,
892 .impl = {
893 .min_access_size = 1,
894 .max_access_size = 1,
896 .endianness = DEVICE_LITTLE_ENDIAN,
899 static void rtc_get_date(Object *obj, struct tm *current_tm, Error **errp)
901 RTCState *s = MC146818_RTC(obj);
903 rtc_update_time(s);
904 rtc_get_time(s, current_tm);
907 static void rtc_realizefn(DeviceState *dev, Error **errp)
909 ISADevice *isadev = ISA_DEVICE(dev);
910 RTCState *s = MC146818_RTC(dev);
911 int base = 0x70;
913 s->cmos_data[RTC_REG_A] = 0x26;
914 s->cmos_data[RTC_REG_B] = 0x02;
915 s->cmos_data[RTC_REG_C] = 0x00;
916 s->cmos_data[RTC_REG_D] = 0x80;
918 /* This is for historical reasons. The default base year qdev property
919 * was set to 2000 for most machine types before the century byte was
920 * implemented.
922 * This if statement means that the century byte will be always 0
923 * (at least until 2079...) for base_year = 1980, but will be set
924 * correctly for base_year = 2000.
926 if (s->base_year == 2000) {
927 s->base_year = 0;
930 rtc_set_date_from_host(isadev);
932 switch (s->lost_tick_policy) {
933 #ifdef TARGET_I386
934 case LOST_TICK_POLICY_SLEW:
935 s->coalesced_timer =
936 timer_new_ns(rtc_clock, rtc_coalesced_timer, s);
937 break;
938 #endif
939 case LOST_TICK_POLICY_DISCARD:
940 break;
941 default:
942 error_setg(errp, "Invalid lost tick policy.");
943 return;
946 s->periodic_timer = timer_new_ns(rtc_clock, rtc_periodic_timer, s);
947 s->update_timer = timer_new_ns(rtc_clock, rtc_update_timer, s);
948 check_update_timer(s);
950 s->suspend_notifier.notify = rtc_notify_suspend;
951 qemu_register_suspend_notifier(&s->suspend_notifier);
953 memory_region_init_io(&s->io, OBJECT(s), &cmos_ops, s, "rtc", 2);
954 isa_register_ioport(isadev, &s->io, base);
956 /* register rtc 0x70 port for coalesced_pio */
957 memory_region_set_flush_coalesced(&s->io);
958 memory_region_init_io(&s->coalesced_io, OBJECT(s), &cmos_ops,
959 s, "rtc-index", 1);
960 memory_region_add_subregion(&s->io, 0, &s->coalesced_io);
961 memory_region_add_coalescing(&s->coalesced_io, 0, 1);
963 qdev_set_legacy_instance_id(dev, base, 3);
964 qemu_register_reset(rtc_reset, s);
966 object_property_add_tm(OBJECT(s), "date", rtc_get_date, NULL);
968 qdev_init_gpio_out(dev, &s->irq, 1);
969 QLIST_INSERT_HEAD(&rtc_devices, s, link);
972 ISADevice *mc146818_rtc_init(ISABus *bus, int base_year, qemu_irq intercept_irq)
974 DeviceState *dev;
975 ISADevice *isadev;
977 isadev = isa_create(bus, TYPE_MC146818_RTC);
978 dev = DEVICE(isadev);
979 qdev_prop_set_int32(dev, "base_year", base_year);
980 qdev_init_nofail(dev);
981 if (intercept_irq) {
982 qdev_connect_gpio_out(dev, 0, intercept_irq);
983 } else {
984 isa_connect_gpio_out(isadev, 0, RTC_ISA_IRQ);
987 object_property_add_alias(qdev_get_machine(), "rtc-time", OBJECT(isadev),
988 "date", NULL);
990 return isadev;
993 static Property mc146818rtc_properties[] = {
994 DEFINE_PROP_INT32("base_year", RTCState, base_year, 1980),
995 DEFINE_PROP_LOSTTICKPOLICY("lost_tick_policy", RTCState,
996 lost_tick_policy, LOST_TICK_POLICY_DISCARD),
997 DEFINE_PROP_END_OF_LIST(),
1000 static void rtc_resetdev(DeviceState *d)
1002 RTCState *s = MC146818_RTC(d);
1004 /* Reason: VM do suspend self will set 0xfe
1005 * Reset any values other than 0xfe(Guest suspend case) */
1006 if (s->cmos_data[0x0f] != 0xfe) {
1007 s->cmos_data[0x0f] = 0x00;
1011 static void rtc_class_initfn(ObjectClass *klass, void *data)
1013 DeviceClass *dc = DEVICE_CLASS(klass);
1015 dc->realize = rtc_realizefn;
1016 dc->reset = rtc_resetdev;
1017 dc->vmsd = &vmstate_rtc;
1018 dc->props = mc146818rtc_properties;
1021 static const TypeInfo mc146818rtc_info = {
1022 .name = TYPE_MC146818_RTC,
1023 .parent = TYPE_ISA_DEVICE,
1024 .instance_size = sizeof(RTCState),
1025 .class_init = rtc_class_initfn,
1028 static void mc146818rtc_register_types(void)
1030 type_register_static(&mc146818rtc_info);
1033 type_init(mc146818rtc_register_types)