ppc/pnv: Link "chip" property to PnvCore::chip pointer
[qemu/ar7.git] / hw / isa / vt82c686.c
blobf828708b1d240e179ca3c9ebb60c984f3d8a1372
1 /*
2 * VT82C686B south bridge support
4 * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7 * This code is licensed under the GNU GPL v2.
9 * Contributions after 2012-01-13 are licensed under the terms of the
10 * GNU GPL, version 2 or (at your option) any later version.
13 #include "qemu/osdep.h"
14 #include "hw/isa/vt82c686.h"
15 #include "hw/i2c/i2c.h"
16 #include "hw/pci/pci.h"
17 #include "hw/qdev-properties.h"
18 #include "hw/isa/isa.h"
19 #include "hw/isa/superio.h"
20 #include "hw/sysbus.h"
21 #include "migration/vmstate.h"
22 #include "hw/mips/mips.h"
23 #include "hw/isa/apm.h"
24 #include "hw/acpi/acpi.h"
25 #include "hw/i2c/pm_smbus.h"
26 #include "qemu/module.h"
27 #include "qemu/timer.h"
28 #include "exec/address-spaces.h"
30 /* #define DEBUG_VT82C686B */
32 #ifdef DEBUG_VT82C686B
33 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __func__, ##__VA_ARGS__)
34 #else
35 #define DPRINTF(fmt, ...)
36 #endif
38 typedef struct SuperIOConfig {
39 uint8_t config[0x100];
40 uint8_t index;
41 uint8_t data;
42 } SuperIOConfig;
44 typedef struct VT82C686BState {
45 PCIDevice dev;
46 MemoryRegion superio;
47 SuperIOConfig superio_conf;
48 } VT82C686BState;
50 #define TYPE_VT82C686B_DEVICE "VT82C686B"
51 #define VT82C686B_DEVICE(obj) \
52 OBJECT_CHECK(VT82C686BState, (obj), TYPE_VT82C686B_DEVICE)
54 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
55 unsigned size)
57 SuperIOConfig *superio_conf = opaque;
59 DPRINTF("superio_ioport_writeb address 0x%x val 0x%x\n", addr, data);
60 if (addr == 0x3f0) {
61 superio_conf->index = data & 0xff;
62 } else {
63 bool can_write = true;
64 /* 0x3f1 */
65 switch (superio_conf->index) {
66 case 0x00 ... 0xdf:
67 case 0xe4:
68 case 0xe5:
69 case 0xe9 ... 0xed:
70 case 0xf3:
71 case 0xf5:
72 case 0xf7:
73 case 0xf9 ... 0xfb:
74 case 0xfd ... 0xff:
75 can_write = false;
76 break;
77 case 0xe7:
78 if ((data & 0xff) != 0xfe) {
79 DPRINTF("change uart 1 base. unsupported yet\n");
80 can_write = false;
82 break;
83 case 0xe8:
84 if ((data & 0xff) != 0xbe) {
85 DPRINTF("change uart 2 base. unsupported yet\n");
86 can_write = false;
88 break;
89 default:
90 break;
93 if (can_write) {
94 superio_conf->config[superio_conf->index] = data & 0xff;
99 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
101 SuperIOConfig *superio_conf = opaque;
103 DPRINTF("superio_ioport_readb address 0x%x\n", addr);
104 return superio_conf->config[superio_conf->index];
107 static const MemoryRegionOps superio_ops = {
108 .read = superio_ioport_readb,
109 .write = superio_ioport_writeb,
110 .endianness = DEVICE_NATIVE_ENDIAN,
111 .impl = {
112 .min_access_size = 1,
113 .max_access_size = 1,
117 static void vt82c686b_isa_reset(DeviceState *dev)
119 VT82C686BState *vt82c = VT82C686B_DEVICE(dev);
120 uint8_t *pci_conf = vt82c->dev.config;
122 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
123 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
124 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
125 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
127 pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
128 pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
129 pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
130 pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
131 pci_conf[0x59] = 0x04;
132 pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
133 pci_conf[0x5f] = 0x04;
134 pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
136 vt82c->superio_conf.config[0xe0] = 0x3c;
137 vt82c->superio_conf.config[0xe2] = 0x03;
138 vt82c->superio_conf.config[0xe3] = 0xfc;
139 vt82c->superio_conf.config[0xe6] = 0xde;
140 vt82c->superio_conf.config[0xe7] = 0xfe;
141 vt82c->superio_conf.config[0xe8] = 0xbe;
144 /* write config pci function0 registers. PCI-ISA bridge */
145 static void vt82c686b_write_config(PCIDevice *d, uint32_t address,
146 uint32_t val, int len)
148 VT82C686BState *vt686 = VT82C686B_DEVICE(d);
150 DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x\n",
151 address, val, len);
153 pci_default_write_config(d, address, val, len);
154 if (address == 0x85) { /* enable or disable super IO configure */
155 memory_region_set_enabled(&vt686->superio, val & 0x2);
159 #define ACPI_DBG_IO_ADDR 0xb044
161 typedef struct VT686PMState {
162 PCIDevice dev;
163 MemoryRegion io;
164 ACPIREGS ar;
165 APMState apm;
166 PMSMBus smb;
167 uint32_t smb_io_base;
168 } VT686PMState;
170 typedef struct VT686AC97State {
171 PCIDevice dev;
172 } VT686AC97State;
174 typedef struct VT686MC97State {
175 PCIDevice dev;
176 } VT686MC97State;
178 #define TYPE_VT82C686B_PM_DEVICE "VT82C686B_PM"
179 #define VT82C686B_PM_DEVICE(obj) \
180 OBJECT_CHECK(VT686PMState, (obj), TYPE_VT82C686B_PM_DEVICE)
182 #define TYPE_VT82C686B_MC97_DEVICE "VT82C686B_MC97"
183 #define VT82C686B_MC97_DEVICE(obj) \
184 OBJECT_CHECK(VT686MC97State, (obj), TYPE_VT82C686B_MC97_DEVICE)
186 #define TYPE_VT82C686B_AC97_DEVICE "VT82C686B_AC97"
187 #define VT82C686B_AC97_DEVICE(obj) \
188 OBJECT_CHECK(VT686AC97State, (obj), TYPE_VT82C686B_AC97_DEVICE)
190 static void pm_update_sci(VT686PMState *s)
192 int sci_level, pmsts;
194 pmsts = acpi_pm1_evt_get_sts(&s->ar);
195 sci_level = (((pmsts & s->ar.pm1.evt.en) &
196 (ACPI_BITMASK_RT_CLOCK_ENABLE |
197 ACPI_BITMASK_POWER_BUTTON_ENABLE |
198 ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
199 ACPI_BITMASK_TIMER_ENABLE)) != 0);
200 pci_set_irq(&s->dev, sci_level);
201 /* schedule a timer interruption if needed */
202 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
203 !(pmsts & ACPI_BITMASK_TIMER_STATUS));
206 static void pm_tmr_timer(ACPIREGS *ar)
208 VT686PMState *s = container_of(ar, VT686PMState, ar);
209 pm_update_sci(s);
212 static void pm_io_space_update(VT686PMState *s)
214 uint32_t pm_io_base;
216 pm_io_base = pci_get_long(s->dev.config + 0x40);
217 pm_io_base &= 0xffc0;
219 memory_region_transaction_begin();
220 memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
221 memory_region_set_address(&s->io, pm_io_base);
222 memory_region_transaction_commit();
225 static void pm_write_config(PCIDevice *d,
226 uint32_t address, uint32_t val, int len)
228 DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x\n",
229 address, val, len);
230 pci_default_write_config(d, address, val, len);
233 static int vmstate_acpi_post_load(void *opaque, int version_id)
235 VT686PMState *s = opaque;
237 pm_io_space_update(s);
238 return 0;
241 static const VMStateDescription vmstate_acpi = {
242 .name = "vt82c686b_pm",
243 .version_id = 1,
244 .minimum_version_id = 1,
245 .post_load = vmstate_acpi_post_load,
246 .fields = (VMStateField[]) {
247 VMSTATE_PCI_DEVICE(dev, VT686PMState),
248 VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
249 VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
250 VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
251 VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
252 VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState),
253 VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
254 VMSTATE_END_OF_LIST()
259 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
260 * just register a PCI device now, functionalities will be implemented later.
263 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp)
265 VT686AC97State *s = VT82C686B_AC97_DEVICE(dev);
266 uint8_t *pci_conf = s->dev.config;
268 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
269 PCI_COMMAND_PARITY);
270 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
271 PCI_STATUS_DEVSEL_MEDIUM);
272 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
275 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
277 PCIDevice *dev;
279 dev = pci_create(bus, devfn, TYPE_VT82C686B_AC97_DEVICE);
280 qdev_init_nofail(&dev->qdev);
283 static void via_ac97_class_init(ObjectClass *klass, void *data)
285 DeviceClass *dc = DEVICE_CLASS(klass);
286 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
288 k->realize = vt82c686b_ac97_realize;
289 k->vendor_id = PCI_VENDOR_ID_VIA;
290 k->device_id = PCI_DEVICE_ID_VIA_AC97;
291 k->revision = 0x50;
292 k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
293 set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
294 dc->desc = "AC97";
297 static const TypeInfo via_ac97_info = {
298 .name = TYPE_VT82C686B_AC97_DEVICE,
299 .parent = TYPE_PCI_DEVICE,
300 .instance_size = sizeof(VT686AC97State),
301 .class_init = via_ac97_class_init,
302 .interfaces = (InterfaceInfo[]) {
303 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
304 { },
308 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp)
310 VT686MC97State *s = VT82C686B_MC97_DEVICE(dev);
311 uint8_t *pci_conf = s->dev.config;
313 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
314 PCI_COMMAND_VGA_PALETTE);
315 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
316 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
319 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
321 PCIDevice *dev;
323 dev = pci_create(bus, devfn, TYPE_VT82C686B_MC97_DEVICE);
324 qdev_init_nofail(&dev->qdev);
327 static void via_mc97_class_init(ObjectClass *klass, void *data)
329 DeviceClass *dc = DEVICE_CLASS(klass);
330 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
332 k->realize = vt82c686b_mc97_realize;
333 k->vendor_id = PCI_VENDOR_ID_VIA;
334 k->device_id = PCI_DEVICE_ID_VIA_MC97;
335 k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
336 k->revision = 0x30;
337 set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
338 dc->desc = "MC97";
341 static const TypeInfo via_mc97_info = {
342 .name = TYPE_VT82C686B_MC97_DEVICE,
343 .parent = TYPE_PCI_DEVICE,
344 .instance_size = sizeof(VT686MC97State),
345 .class_init = via_mc97_class_init,
346 .interfaces = (InterfaceInfo[]) {
347 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
348 { },
352 /* vt82c686 pm init */
353 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
355 VT686PMState *s = VT82C686B_PM_DEVICE(dev);
356 uint8_t *pci_conf;
358 pci_conf = s->dev.config;
359 pci_set_word(pci_conf + PCI_COMMAND, 0);
360 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
361 PCI_STATUS_DEVSEL_MEDIUM);
363 /* 0x48-0x4B is Power Management I/O Base */
364 pci_set_long(pci_conf + 0x48, 0x00000001);
366 /* SMB ports:0xeee0~0xeeef */
367 s->smb_io_base = ((s->smb_io_base & 0xfff0) + 0x0);
368 pci_conf[0x90] = s->smb_io_base | 1;
369 pci_conf[0x91] = s->smb_io_base >> 8;
370 pci_conf[0xd2] = 0x90;
371 pm_smbus_init(DEVICE(s), &s->smb, false);
372 memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
374 apm_init(dev, &s->apm, NULL, s);
376 memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
377 memory_region_set_enabled(&s->io, false);
378 memory_region_add_subregion(get_system_io(), 0, &s->io);
380 acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
381 acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
382 acpi_pm1_cnt_init(&s->ar, &s->io, false, false, 2);
385 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
386 qemu_irq sci_irq)
388 PCIDevice *dev;
389 VT686PMState *s;
391 dev = pci_create(bus, devfn, TYPE_VT82C686B_PM_DEVICE);
392 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
394 s = VT82C686B_PM_DEVICE(dev);
396 qdev_init_nofail(&dev->qdev);
398 return s->smb.smbus;
401 static Property via_pm_properties[] = {
402 DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
403 DEFINE_PROP_END_OF_LIST(),
406 static void via_pm_class_init(ObjectClass *klass, void *data)
408 DeviceClass *dc = DEVICE_CLASS(klass);
409 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
411 k->realize = vt82c686b_pm_realize;
412 k->config_write = pm_write_config;
413 k->vendor_id = PCI_VENDOR_ID_VIA;
414 k->device_id = PCI_DEVICE_ID_VIA_ACPI;
415 k->class_id = PCI_CLASS_BRIDGE_OTHER;
416 k->revision = 0x40;
417 dc->desc = "PM";
418 dc->vmsd = &vmstate_acpi;
419 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
420 dc->props = via_pm_properties;
423 static const TypeInfo via_pm_info = {
424 .name = TYPE_VT82C686B_PM_DEVICE,
425 .parent = TYPE_PCI_DEVICE,
426 .instance_size = sizeof(VT686PMState),
427 .class_init = via_pm_class_init,
428 .interfaces = (InterfaceInfo[]) {
429 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
430 { },
434 static const VMStateDescription vmstate_via = {
435 .name = "vt82c686b",
436 .version_id = 1,
437 .minimum_version_id = 1,
438 .fields = (VMStateField[]) {
439 VMSTATE_PCI_DEVICE(dev, VT82C686BState),
440 VMSTATE_END_OF_LIST()
444 /* init the PCI-to-ISA bridge */
445 static void vt82c686b_realize(PCIDevice *d, Error **errp)
447 VT82C686BState *vt82c = VT82C686B_DEVICE(d);
448 uint8_t *pci_conf;
449 ISABus *isa_bus;
450 uint8_t *wmask;
451 int i;
453 isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
454 pci_address_space_io(d), errp);
455 if (!isa_bus) {
456 return;
459 pci_conf = d->config;
460 pci_config_set_prog_interface(pci_conf, 0x0);
462 wmask = d->wmask;
463 for (i = 0x00; i < 0xff; i++) {
464 if (i <= 0x03 || (i >= 0x08 && i <= 0x3f)) {
465 wmask[i] = 0x00;
469 memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
470 &vt82c->superio_conf, "superio", 2);
471 memory_region_set_enabled(&vt82c->superio, false);
473 * The floppy also uses 0x3f0 and 0x3f1.
474 * But we do not emulate a floppy, so just set it here.
476 memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
477 &vt82c->superio);
480 ISABus *vt82c686b_isa_init(PCIBus *bus, int devfn)
482 PCIDevice *d;
484 d = pci_create_simple_multifunction(bus, devfn, true,
485 TYPE_VT82C686B_DEVICE);
487 return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
490 static void via_class_init(ObjectClass *klass, void *data)
492 DeviceClass *dc = DEVICE_CLASS(klass);
493 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
495 k->realize = vt82c686b_realize;
496 k->config_write = vt82c686b_write_config;
497 k->vendor_id = PCI_VENDOR_ID_VIA;
498 k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
499 k->class_id = PCI_CLASS_BRIDGE_ISA;
500 k->revision = 0x40;
501 dc->reset = vt82c686b_isa_reset;
502 dc->desc = "ISA bridge";
503 dc->vmsd = &vmstate_via;
505 * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
506 * e.g. by mips_fulong2e_init()
508 dc->user_creatable = false;
511 static const TypeInfo via_info = {
512 .name = TYPE_VT82C686B_DEVICE,
513 .parent = TYPE_PCI_DEVICE,
514 .instance_size = sizeof(VT82C686BState),
515 .class_init = via_class_init,
516 .interfaces = (InterfaceInfo[]) {
517 { INTERFACE_CONVENTIONAL_PCI_DEVICE },
518 { },
522 static void vt82c686b_superio_class_init(ObjectClass *klass, void *data)
524 ISASuperIOClass *sc = ISA_SUPERIO_CLASS(klass);
526 sc->serial.count = 2;
527 sc->parallel.count = 1;
528 sc->ide.count = 0;
529 sc->floppy.count = 1;
532 static const TypeInfo via_superio_info = {
533 .name = TYPE_VT82C686B_SUPERIO,
534 .parent = TYPE_ISA_SUPERIO,
535 .instance_size = sizeof(ISASuperIODevice),
536 .class_size = sizeof(ISASuperIOClass),
537 .class_init = vt82c686b_superio_class_init,
540 static void vt82c686b_register_types(void)
542 type_register_static(&via_ac97_info);
543 type_register_static(&via_mc97_info);
544 type_register_static(&via_pm_info);
545 type_register_static(&via_superio_info);
546 type_register_static(&via_info);
549 type_init(vt82c686b_register_types)