hw/misc/a9scu: Do not allow invalid CPU count
[qemu/ar7.git] / hw / display / xlnx_dp.c
blobc56e6ec593657760972638938c25804d974e0408
1 /*
2 * Xilinx Display Port
4 * Copyright (C) 2015 : GreenSocs Ltd
5 * http://www.greensocs.com/ , email: info@greensocs.com
7 * Developed by :
8 * Frederic Konrad <fred.konrad@greensocs.com>
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation, either version 2 of the License, or
13 * (at your option)any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License along
21 * with this program; if not, see <http://www.gnu.org/licenses/>.
25 #include "qemu/osdep.h"
26 #include "qapi/error.h"
27 #include "qemu/error-report.h"
28 #include "qemu/log.h"
29 #include "qemu/module.h"
30 #include "hw/display/xlnx_dp.h"
31 #include "hw/irq.h"
32 #include "migration/vmstate.h"
34 #ifndef DEBUG_DP
35 #define DEBUG_DP 0
36 #endif
38 #define DPRINTF(fmt, ...) do { \
39 if (DEBUG_DP) { \
40 qemu_log("xlnx_dp: " fmt , ## __VA_ARGS__); \
41 } \
42 } while (0)
45 * Register offset for DP.
47 #define DP_LINK_BW_SET (0x0000 >> 2)
48 #define DP_LANE_COUNT_SET (0x0004 >> 2)
49 #define DP_ENHANCED_FRAME_EN (0x0008 >> 2)
50 #define DP_TRAINING_PATTERN_SET (0x000C >> 2)
51 #define DP_LINK_QUAL_PATTERN_SET (0x0010 >> 2)
52 #define DP_SCRAMBLING_DISABLE (0x0014 >> 2)
53 #define DP_DOWNSPREAD_CTRL (0x0018 >> 2)
54 #define DP_SOFTWARE_RESET (0x001C >> 2)
55 #define DP_TRANSMITTER_ENABLE (0x0080 >> 2)
56 #define DP_MAIN_STREAM_ENABLE (0x0084 >> 2)
57 #define DP_FORCE_SCRAMBLER_RESET (0x00C0 >> 2)
58 #define DP_VERSION_REGISTER (0x00F8 >> 2)
59 #define DP_CORE_ID (0x00FC >> 2)
61 #define DP_AUX_COMMAND_REGISTER (0x0100 >> 2)
62 #define AUX_ADDR_ONLY_MASK (0x1000)
63 #define AUX_COMMAND_MASK (0x0F00)
64 #define AUX_COMMAND_SHIFT (8)
65 #define AUX_COMMAND_NBYTES (0x000F)
67 #define DP_AUX_WRITE_FIFO (0x0104 >> 2)
68 #define DP_AUX_ADDRESS (0x0108 >> 2)
69 #define DP_AUX_CLOCK_DIVIDER (0x010C >> 2)
70 #define DP_TX_USER_FIFO_OVERFLOW (0x0110 >> 2)
71 #define DP_INTERRUPT_SIGNAL_STATE (0x0130 >> 2)
72 #define DP_AUX_REPLY_DATA (0x0134 >> 2)
73 #define DP_AUX_REPLY_CODE (0x0138 >> 2)
74 #define DP_AUX_REPLY_COUNT (0x013C >> 2)
75 #define DP_REPLY_DATA_COUNT (0x0148 >> 2)
76 #define DP_REPLY_STATUS (0x014C >> 2)
77 #define DP_HPD_DURATION (0x0150 >> 2)
78 #define DP_MAIN_STREAM_HTOTAL (0x0180 >> 2)
79 #define DP_MAIN_STREAM_VTOTAL (0x0184 >> 2)
80 #define DP_MAIN_STREAM_POLARITY (0x0188 >> 2)
81 #define DP_MAIN_STREAM_HSWIDTH (0x018C >> 2)
82 #define DP_MAIN_STREAM_VSWIDTH (0x0190 >> 2)
83 #define DP_MAIN_STREAM_HRES (0x0194 >> 2)
84 #define DP_MAIN_STREAM_VRES (0x0198 >> 2)
85 #define DP_MAIN_STREAM_HSTART (0x019C >> 2)
86 #define DP_MAIN_STREAM_VSTART (0x01A0 >> 2)
87 #define DP_MAIN_STREAM_MISC0 (0x01A4 >> 2)
88 #define DP_MAIN_STREAM_MISC1 (0x01A8 >> 2)
89 #define DP_MAIN_STREAM_M_VID (0x01AC >> 2)
90 #define DP_MSA_TRANSFER_UNIT_SIZE (0x01B0 >> 2)
91 #define DP_MAIN_STREAM_N_VID (0x01B4 >> 2)
92 #define DP_USER_DATA_COUNT_PER_LANE (0x01BC >> 2)
93 #define DP_MIN_BYTES_PER_TU (0x01C4 >> 2)
94 #define DP_FRAC_BYTES_PER_TU (0x01C8 >> 2)
95 #define DP_INIT_WAIT (0x01CC >> 2)
96 #define DP_PHY_RESET (0x0200 >> 2)
97 #define DP_PHY_VOLTAGE_DIFF_LANE_0 (0x0220 >> 2)
98 #define DP_PHY_VOLTAGE_DIFF_LANE_1 (0x0224 >> 2)
99 #define DP_TRANSMIT_PRBS7 (0x0230 >> 2)
100 #define DP_PHY_CLOCK_SELECT (0x0234 >> 2)
101 #define DP_TX_PHY_POWER_DOWN (0x0238 >> 2)
102 #define DP_PHY_PRECURSOR_LANE_0 (0x023C >> 2)
103 #define DP_PHY_PRECURSOR_LANE_1 (0x0240 >> 2)
104 #define DP_PHY_POSTCURSOR_LANE_0 (0x024C >> 2)
105 #define DP_PHY_POSTCURSOR_LANE_1 (0x0250 >> 2)
106 #define DP_PHY_STATUS (0x0280 >> 2)
108 #define DP_TX_AUDIO_CONTROL (0x0300 >> 2)
109 #define DP_TX_AUD_CTRL (1)
111 #define DP_TX_AUDIO_CHANNELS (0x0304 >> 2)
112 #define DP_TX_AUDIO_INFO_DATA(n) ((0x0308 + 4 * n) >> 2)
113 #define DP_TX_M_AUD (0x0328 >> 2)
114 #define DP_TX_N_AUD (0x032C >> 2)
115 #define DP_TX_AUDIO_EXT_DATA(n) ((0x0330 + 4 * n) >> 2)
116 #define DP_INT_STATUS (0x03A0 >> 2)
117 #define DP_INT_MASK (0x03A4 >> 2)
118 #define DP_INT_EN (0x03A8 >> 2)
119 #define DP_INT_DS (0x03AC >> 2)
122 * Registers offset for Audio Video Buffer configuration.
124 #define V_BLEND_OFFSET (0xA000)
125 #define V_BLEND_BG_CLR_0 (0x0000 >> 2)
126 #define V_BLEND_BG_CLR_1 (0x0004 >> 2)
127 #define V_BLEND_BG_CLR_2 (0x0008 >> 2)
128 #define V_BLEND_SET_GLOBAL_ALPHA_REG (0x000C >> 2)
129 #define V_BLEND_OUTPUT_VID_FORMAT (0x0014 >> 2)
130 #define V_BLEND_LAYER0_CONTROL (0x0018 >> 2)
131 #define V_BLEND_LAYER1_CONTROL (0x001C >> 2)
133 #define V_BLEND_RGB2YCBCR_COEFF(n) ((0x0020 + 4 * n) >> 2)
134 #define V_BLEND_IN1CSC_COEFF(n) ((0x0044 + 4 * n) >> 2)
136 #define V_BLEND_LUMA_IN1CSC_OFFSET (0x0068 >> 2)
137 #define V_BLEND_CR_IN1CSC_OFFSET (0x006C >> 2)
138 #define V_BLEND_CB_IN1CSC_OFFSET (0x0070 >> 2)
139 #define V_BLEND_LUMA_OUTCSC_OFFSET (0x0074 >> 2)
140 #define V_BLEND_CR_OUTCSC_OFFSET (0x0078 >> 2)
141 #define V_BLEND_CB_OUTCSC_OFFSET (0x007C >> 2)
143 #define V_BLEND_IN2CSC_COEFF(n) ((0x0080 + 4 * n) >> 2)
145 #define V_BLEND_LUMA_IN2CSC_OFFSET (0x00A4 >> 2)
146 #define V_BLEND_CR_IN2CSC_OFFSET (0x00A8 >> 2)
147 #define V_BLEND_CB_IN2CSC_OFFSET (0x00AC >> 2)
148 #define V_BLEND_CHROMA_KEY_ENABLE (0x01D0 >> 2)
149 #define V_BLEND_CHROMA_KEY_COMP1 (0x01D4 >> 2)
150 #define V_BLEND_CHROMA_KEY_COMP2 (0x01D8 >> 2)
151 #define V_BLEND_CHROMA_KEY_COMP3 (0x01DC >> 2)
154 * Registers offset for Audio Video Buffer configuration.
156 #define AV_BUF_MANAGER_OFFSET (0xB000)
157 #define AV_BUF_FORMAT (0x0000 >> 2)
158 #define AV_BUF_NON_LIVE_LATENCY (0x0008 >> 2)
159 #define AV_CHBUF0 (0x0010 >> 2)
160 #define AV_CHBUF1 (0x0014 >> 2)
161 #define AV_CHBUF2 (0x0018 >> 2)
162 #define AV_CHBUF3 (0x001C >> 2)
163 #define AV_CHBUF4 (0x0020 >> 2)
164 #define AV_CHBUF5 (0x0024 >> 2)
165 #define AV_BUF_STC_CONTROL (0x002C >> 2)
166 #define AV_BUF_STC_INIT_VALUE0 (0x0030 >> 2)
167 #define AV_BUF_STC_INIT_VALUE1 (0x0034 >> 2)
168 #define AV_BUF_STC_ADJ (0x0038 >> 2)
169 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG0 (0x003C >> 2)
170 #define AV_BUF_STC_VIDEO_VSYNC_TS_REG1 (0x0040 >> 2)
171 #define AV_BUF_STC_EXT_VSYNC_TS_REG0 (0x0044 >> 2)
172 #define AV_BUF_STC_EXT_VSYNC_TS_REG1 (0x0048 >> 2)
173 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG0 (0x004C >> 2)
174 #define AV_BUF_STC_CUSTOM_EVENT_TS_REG1 (0x0050 >> 2)
175 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG0 (0x0054 >> 2)
176 #define AV_BUF_STC_CUSTOM_EVENT2_TS_REG1 (0x0058 >> 2)
177 #define AV_BUF_STC_SNAPSHOT0 (0x0060 >> 2)
178 #define AV_BUF_STC_SNAPSHOT1 (0x0064 >> 2)
179 #define AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT (0x0070 >> 2)
180 #define AV_BUF_HCOUNT_VCOUNT_INT0 (0x0074 >> 2)
181 #define AV_BUF_HCOUNT_VCOUNT_INT1 (0x0078 >> 2)
182 #define AV_BUF_DITHER_CONFIG (0x007C >> 2)
183 #define AV_BUF_DITHER_CONFIG_MAX (0x008C >> 2)
184 #define AV_BUF_DITHER_CONFIG_MIN (0x0090 >> 2)
185 #define AV_BUF_PATTERN_GEN_SELECT (0x0100 >> 2)
186 #define AV_BUF_AUD_VID_CLK_SOURCE (0x0120 >> 2)
187 #define AV_BUF_SRST_REG (0x0124 >> 2)
188 #define AV_BUF_AUDIO_RDY_INTERVAL (0x0128 >> 2)
189 #define AV_BUF_AUDIO_CH_CONFIG (0x012C >> 2)
191 #define AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(n)((0x0200 + 4 * n) >> 2)
193 #define AV_BUF_VIDEO_COMP_SCALE_FACTOR(n) ((0x020C + 4 * n) >> 2)
195 #define AV_BUF_LIVE_VIDEO_COMP_SF(n) ((0x0218 + 4 * n) >> 2)
197 #define AV_BUF_LIVE_VID_CONFIG (0x0224 >> 2)
199 #define AV_BUF_LIVE_GFX_COMP_SF(n) ((0x0228 + 4 * n) >> 2)
201 #define AV_BUF_LIVE_GFX_CONFIG (0x0234 >> 2)
203 #define AUDIO_MIXER_REGISTER_OFFSET (0xC000)
204 #define AUDIO_MIXER_VOLUME_CONTROL (0x0000 >> 2)
205 #define AUDIO_MIXER_META_DATA (0x0004 >> 2)
206 #define AUD_CH_STATUS_REG(n) ((0x0008 + 4 * n) >> 2)
207 #define AUD_CH_A_DATA_REG(n) ((0x0020 + 4 * n) >> 2)
208 #define AUD_CH_B_DATA_REG(n) ((0x0038 + 4 * n) >> 2)
210 #define DP_AUDIO_DMA_CHANNEL(n) (4 + n)
211 #define DP_GRAPHIC_DMA_CHANNEL (3)
212 #define DP_VIDEO_DMA_CHANNEL (0)
214 enum DPGraphicFmt {
215 DP_GRAPHIC_RGBA8888 = 0 << 8,
216 DP_GRAPHIC_ABGR8888 = 1 << 8,
217 DP_GRAPHIC_RGB888 = 2 << 8,
218 DP_GRAPHIC_BGR888 = 3 << 8,
219 DP_GRAPHIC_RGBA5551 = 4 << 8,
220 DP_GRAPHIC_RGBA4444 = 5 << 8,
221 DP_GRAPHIC_RGB565 = 6 << 8,
222 DP_GRAPHIC_8BPP = 7 << 8,
223 DP_GRAPHIC_4BPP = 8 << 8,
224 DP_GRAPHIC_2BPP = 9 << 8,
225 DP_GRAPHIC_1BPP = 10 << 8,
226 DP_GRAPHIC_MASK = 0xF << 8
229 enum DPVideoFmt {
230 DP_NL_VID_CB_Y0_CR_Y1 = 0,
231 DP_NL_VID_CR_Y0_CB_Y1 = 1,
232 DP_NL_VID_Y0_CR_Y1_CB = 2,
233 DP_NL_VID_Y0_CB_Y1_CR = 3,
234 DP_NL_VID_YV16 = 4,
235 DP_NL_VID_YV24 = 5,
236 DP_NL_VID_YV16CL = 6,
237 DP_NL_VID_MONO = 7,
238 DP_NL_VID_YV16CL2 = 8,
239 DP_NL_VID_YUV444 = 9,
240 DP_NL_VID_RGB888 = 10,
241 DP_NL_VID_RGBA8880 = 11,
242 DP_NL_VID_RGB888_10BPC = 12,
243 DP_NL_VID_YUV444_10BPC = 13,
244 DP_NL_VID_YV16CL2_10BPC = 14,
245 DP_NL_VID_YV16CL_10BPC = 15,
246 DP_NL_VID_YV16_10BPC = 16,
247 DP_NL_VID_YV24_10BPC = 17,
248 DP_NL_VID_Y_ONLY_10BPC = 18,
249 DP_NL_VID_YV16_420 = 19,
250 DP_NL_VID_YV16CL_420 = 20,
251 DP_NL_VID_YV16CL2_420 = 21,
252 DP_NL_VID_YV16_420_10BPC = 22,
253 DP_NL_VID_YV16CL_420_10BPC = 23,
254 DP_NL_VID_YV16CL2_420_10BPC = 24,
255 DP_NL_VID_FMT_MASK = 0x1F
258 typedef enum DPGraphicFmt DPGraphicFmt;
259 typedef enum DPVideoFmt DPVideoFmt;
261 static const VMStateDescription vmstate_dp = {
262 .name = TYPE_XLNX_DP,
263 .version_id = 1,
264 .fields = (VMStateField[]){
265 VMSTATE_UINT32_ARRAY(core_registers, XlnxDPState,
266 DP_CORE_REG_ARRAY_SIZE),
267 VMSTATE_UINT32_ARRAY(avbufm_registers, XlnxDPState,
268 DP_AVBUF_REG_ARRAY_SIZE),
269 VMSTATE_UINT32_ARRAY(vblend_registers, XlnxDPState,
270 DP_VBLEND_REG_ARRAY_SIZE),
271 VMSTATE_UINT32_ARRAY(audio_registers, XlnxDPState,
272 DP_AUDIO_REG_ARRAY_SIZE),
273 VMSTATE_END_OF_LIST()
277 static void xlnx_dp_update_irq(XlnxDPState *s);
279 static uint64_t xlnx_dp_audio_read(void *opaque, hwaddr offset, unsigned size)
281 XlnxDPState *s = XLNX_DP(opaque);
283 offset = offset >> 2;
284 return s->audio_registers[offset];
287 static void xlnx_dp_audio_write(void *opaque, hwaddr offset, uint64_t value,
288 unsigned size)
290 XlnxDPState *s = XLNX_DP(opaque);
292 offset = offset >> 2;
294 switch (offset) {
295 case AUDIO_MIXER_META_DATA:
296 s->audio_registers[offset] = value & 0x00000001;
297 break;
298 default:
299 s->audio_registers[offset] = value;
300 break;
304 static const MemoryRegionOps audio_ops = {
305 .read = xlnx_dp_audio_read,
306 .write = xlnx_dp_audio_write,
307 .endianness = DEVICE_NATIVE_ENDIAN,
310 static inline uint32_t xlnx_dp_audio_get_volume(XlnxDPState *s,
311 uint8_t channel)
313 switch (channel) {
314 case 0:
315 return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 0, 16);
316 case 1:
317 return extract32(s->audio_registers[AUDIO_MIXER_VOLUME_CONTROL], 16,
318 16);
319 default:
320 return 0;
324 static inline void xlnx_dp_audio_activate(XlnxDPState *s)
326 bool activated = ((s->core_registers[DP_TX_AUDIO_CONTROL]
327 & DP_TX_AUD_CTRL) != 0);
328 AUD_set_active_out(s->amixer_output_stream, activated);
329 xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(0),
330 &s->audio_buffer_0);
331 xlnx_dpdma_set_host_data_location(s->dpdma, DP_AUDIO_DMA_CHANNEL(1),
332 &s->audio_buffer_1);
335 static inline void xlnx_dp_audio_mix_buffer(XlnxDPState *s)
338 * Audio packets are signed and have this shape:
339 * | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 |
340 * | R3 | L3 | R2 | L2 | R1 | L1 | R0 | L0 |
342 * Output audio is 16bits saturated.
344 int i;
346 if ((s->audio_data_available[0]) && (xlnx_dp_audio_get_volume(s, 0))) {
347 for (i = 0; i < s->audio_data_available[0] / 2; i++) {
348 s->temp_buffer[i] = (int64_t)(s->audio_buffer_0[i])
349 * xlnx_dp_audio_get_volume(s, 0) / 8192;
351 s->byte_left = s->audio_data_available[0];
352 } else {
353 memset(s->temp_buffer, 0, s->audio_data_available[1] / 2);
356 if ((s->audio_data_available[1]) && (xlnx_dp_audio_get_volume(s, 1))) {
357 if ((s->audio_data_available[0] == 0)
358 || (s->audio_data_available[1] == s->audio_data_available[0])) {
359 for (i = 0; i < s->audio_data_available[1] / 2; i++) {
360 s->temp_buffer[i] += (int64_t)(s->audio_buffer_1[i])
361 * xlnx_dp_audio_get_volume(s, 1) / 8192;
363 s->byte_left = s->audio_data_available[1];
367 for (i = 0; i < s->byte_left / 2; i++) {
368 s->out_buffer[i] = MAX(-32767, MIN(s->temp_buffer[i], 32767));
371 s->data_ptr = 0;
374 static void xlnx_dp_audio_callback(void *opaque, int avail)
377 * Get some data from the DPDMA and compute these datas.
378 * Then wait for QEMU's audio subsystem to call this callback.
380 XlnxDPState *s = XLNX_DP(opaque);
381 size_t written = 0;
383 /* If there are already some data don't get more data. */
384 if (s->byte_left == 0) {
385 s->audio_data_available[0] = xlnx_dpdma_start_operation(s->dpdma, 4,
386 true);
387 s->audio_data_available[1] = xlnx_dpdma_start_operation(s->dpdma, 5,
388 true);
389 xlnx_dp_audio_mix_buffer(s);
392 /* Send the buffer through the audio. */
393 if (s->byte_left <= MAX_QEMU_BUFFER_SIZE) {
394 if (s->byte_left != 0) {
395 written = AUD_write(s->amixer_output_stream,
396 &s->out_buffer[s->data_ptr], s->byte_left);
397 } else {
398 int len_to_copy;
400 * There is nothing to play.. We don't have any data! Fill the
401 * buffer with zero's and send it.
403 written = 0;
404 while (avail) {
405 len_to_copy = MIN(AUD_CHBUF_MAX_DEPTH, avail);
406 memset(s->out_buffer, 0, len_to_copy);
407 avail -= AUD_write(s->amixer_output_stream, s->out_buffer,
408 len_to_copy);
411 } else {
412 written = AUD_write(s->amixer_output_stream,
413 &s->out_buffer[s->data_ptr], MAX_QEMU_BUFFER_SIZE);
415 s->byte_left -= written;
416 s->data_ptr += written;
420 * AUX channel related function.
422 static void xlnx_dp_aux_clear_rx_fifo(XlnxDPState *s)
424 fifo8_reset(&s->rx_fifo);
427 static void xlnx_dp_aux_push_rx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
429 DPRINTF("Push %u data in rx_fifo\n", (unsigned)len);
430 fifo8_push_all(&s->rx_fifo, buf, len);
433 static uint8_t xlnx_dp_aux_pop_rx_fifo(XlnxDPState *s)
435 uint8_t ret;
437 if (fifo8_is_empty(&s->rx_fifo)) {
438 qemu_log_mask(LOG_GUEST_ERROR,
439 "%s: Reading empty RX_FIFO\n",
440 __func__);
442 * The datasheet is not clear about the reset value, it seems
443 * to be unspecified. We choose to return '0'.
445 ret = 0;
446 } else {
447 ret = fifo8_pop(&s->rx_fifo);
448 DPRINTF("pop 0x%" PRIX8 " from rx_fifo.\n", ret);
450 return ret;
453 static void xlnx_dp_aux_clear_tx_fifo(XlnxDPState *s)
455 fifo8_reset(&s->tx_fifo);
458 static void xlnx_dp_aux_push_tx_fifo(XlnxDPState *s, uint8_t *buf, size_t len)
460 DPRINTF("Push %u data in tx_fifo\n", (unsigned)len);
461 fifo8_push_all(&s->tx_fifo, buf, len);
464 static uint8_t xlnx_dp_aux_pop_tx_fifo(XlnxDPState *s)
466 uint8_t ret;
468 if (fifo8_is_empty(&s->tx_fifo)) {
469 error_report("%s: TX_FIFO underflow", __func__);
470 abort();
472 ret = fifo8_pop(&s->tx_fifo);
473 DPRINTF("pop 0x%2.2X from tx_fifo.\n", ret);
474 return ret;
477 static uint32_t xlnx_dp_aux_get_address(XlnxDPState *s)
479 return s->core_registers[DP_AUX_ADDRESS];
483 * Get command from the register.
485 static void xlnx_dp_aux_set_command(XlnxDPState *s, uint32_t value)
487 bool address_only = (value & AUX_ADDR_ONLY_MASK) != 0;
488 AUXCommand cmd = (value & AUX_COMMAND_MASK) >> AUX_COMMAND_SHIFT;
489 uint8_t nbytes = (value & AUX_COMMAND_NBYTES) + 1;
490 uint8_t buf[16];
491 int i;
494 * When an address_only command is executed nothing happen to the fifo, so
495 * just make nbytes = 0.
497 if (address_only) {
498 nbytes = 0;
501 switch (cmd) {
502 case READ_AUX:
503 case READ_I2C:
504 case READ_I2C_MOT:
505 s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
506 xlnx_dp_aux_get_address(s),
507 nbytes, buf);
508 s->core_registers[DP_REPLY_DATA_COUNT] = nbytes;
510 if (s->core_registers[DP_AUX_REPLY_CODE] == AUX_I2C_ACK) {
511 xlnx_dp_aux_push_rx_fifo(s, buf, nbytes);
513 break;
514 case WRITE_AUX:
515 case WRITE_I2C:
516 case WRITE_I2C_MOT:
517 for (i = 0; i < nbytes; i++) {
518 buf[i] = xlnx_dp_aux_pop_tx_fifo(s);
520 s->core_registers[DP_AUX_REPLY_CODE] = aux_request(s->aux_bus, cmd,
521 xlnx_dp_aux_get_address(s),
522 nbytes, buf);
523 xlnx_dp_aux_clear_tx_fifo(s);
524 break;
525 case WRITE_I2C_STATUS:
526 qemu_log_mask(LOG_UNIMP, "xlnx_dp: Write i2c status not implemented\n");
527 break;
528 default:
529 error_report("%s: invalid command: %u", __func__, cmd);
530 abort();
533 s->core_registers[DP_INTERRUPT_SIGNAL_STATE] |= 0x04;
536 static void xlnx_dp_set_dpdma(const Object *obj, const char *name, Object *val,
537 Error **errp)
539 XlnxDPState *s = XLNX_DP(obj);
540 if (s->console) {
541 DisplaySurface *surface = qemu_console_surface(s->console);
542 XlnxDPDMAState *dma = XLNX_DPDMA(val);
543 xlnx_dpdma_set_host_data_location(dma, DP_GRAPHIC_DMA_CHANNEL,
544 surface_data(surface));
548 static inline uint8_t xlnx_dp_global_alpha_value(XlnxDPState *s)
550 return (s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x1FE) >> 1;
553 static inline bool xlnx_dp_global_alpha_enabled(XlnxDPState *s)
556 * If the alpha is totally opaque (255) we consider the alpha is disabled to
557 * reduce CPU consumption.
559 return ((xlnx_dp_global_alpha_value(s) != 0xFF) &&
560 ((s->vblend_registers[V_BLEND_SET_GLOBAL_ALPHA_REG] & 0x01) != 0));
563 static void xlnx_dp_recreate_surface(XlnxDPState *s)
566 * Two possibilities, if blending is enabled the console displays
567 * bout_plane, if not g_plane is displayed.
569 uint16_t width = s->core_registers[DP_MAIN_STREAM_HRES];
570 uint16_t height = s->core_registers[DP_MAIN_STREAM_VRES];
571 DisplaySurface *current_console_surface = qemu_console_surface(s->console);
573 if ((width != 0) && (height != 0)) {
575 * As dpy_gfx_replace_surface calls qemu_free_displaysurface on the
576 * surface we need to be careful and don't free the surface associated
577 * to the console or double free will happen.
579 if (s->bout_plane.surface != current_console_surface) {
580 qemu_free_displaysurface(s->bout_plane.surface);
582 if (s->v_plane.surface != current_console_surface) {
583 qemu_free_displaysurface(s->v_plane.surface);
585 if (s->g_plane.surface != current_console_surface) {
586 qemu_free_displaysurface(s->g_plane.surface);
589 s->g_plane.surface
590 = qemu_create_displaysurface_from(width, height,
591 s->g_plane.format, 0, NULL);
592 s->v_plane.surface
593 = qemu_create_displaysurface_from(width, height,
594 s->v_plane.format, 0, NULL);
595 if (xlnx_dp_global_alpha_enabled(s)) {
596 s->bout_plane.surface =
597 qemu_create_displaysurface_from(width,
598 height,
599 s->g_plane.format,
600 0, NULL);
601 dpy_gfx_replace_surface(s->console, s->bout_plane.surface);
602 } else {
603 s->bout_plane.surface = NULL;
604 dpy_gfx_replace_surface(s->console, s->g_plane.surface);
607 xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
608 surface_data(s->g_plane.surface));
609 xlnx_dpdma_set_host_data_location(s->dpdma, DP_VIDEO_DMA_CHANNEL,
610 surface_data(s->v_plane.surface));
615 * Change the graphic format of the surface.
617 static void xlnx_dp_change_graphic_fmt(XlnxDPState *s)
619 switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK) {
620 case DP_GRAPHIC_RGBA8888:
621 s->g_plane.format = PIXMAN_r8g8b8a8;
622 break;
623 case DP_GRAPHIC_ABGR8888:
624 s->g_plane.format = PIXMAN_a8b8g8r8;
625 break;
626 case DP_GRAPHIC_RGB565:
627 s->g_plane.format = PIXMAN_r5g6b5;
628 break;
629 case DP_GRAPHIC_RGB888:
630 s->g_plane.format = PIXMAN_r8g8b8;
631 break;
632 case DP_GRAPHIC_BGR888:
633 s->g_plane.format = PIXMAN_b8g8r8;
634 break;
635 default:
636 error_report("%s: unsupported graphic format %u", __func__,
637 s->avbufm_registers[AV_BUF_FORMAT] & DP_GRAPHIC_MASK);
638 abort();
641 switch (s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK) {
642 case 0:
643 s->v_plane.format = PIXMAN_x8b8g8r8;
644 break;
645 case DP_NL_VID_Y0_CB_Y1_CR:
646 s->v_plane.format = PIXMAN_yuy2;
647 break;
648 case DP_NL_VID_RGBA8880:
649 s->v_plane.format = PIXMAN_x8b8g8r8;
650 break;
651 default:
652 error_report("%s: unsupported video format %u", __func__,
653 s->avbufm_registers[AV_BUF_FORMAT] & DP_NL_VID_FMT_MASK);
654 abort();
657 xlnx_dp_recreate_surface(s);
660 static void xlnx_dp_update_irq(XlnxDPState *s)
662 uint32_t flags;
664 flags = s->core_registers[DP_INT_STATUS] & ~s->core_registers[DP_INT_MASK];
665 DPRINTF("update IRQ value = %" PRIx32 "\n", flags);
666 qemu_set_irq(s->irq, flags != 0);
669 static uint64_t xlnx_dp_read(void *opaque, hwaddr offset, unsigned size)
671 XlnxDPState *s = XLNX_DP(opaque);
672 uint64_t ret = 0;
674 offset = offset >> 2;
676 switch (offset) {
677 case DP_TX_USER_FIFO_OVERFLOW:
678 /* This register is cleared after a read */
679 ret = s->core_registers[DP_TX_USER_FIFO_OVERFLOW];
680 s->core_registers[DP_TX_USER_FIFO_OVERFLOW] = 0;
681 break;
682 case DP_AUX_REPLY_DATA:
683 ret = xlnx_dp_aux_pop_rx_fifo(s);
684 break;
685 case DP_INTERRUPT_SIGNAL_STATE:
687 * XXX: Not sure it is the right thing to do actually.
688 * The register is not written by the device driver so it's stuck
689 * to 0x04.
691 ret = s->core_registers[DP_INTERRUPT_SIGNAL_STATE];
692 s->core_registers[DP_INTERRUPT_SIGNAL_STATE] &= ~0x04;
693 break;
694 case DP_AUX_WRITE_FIFO:
695 case DP_TX_AUDIO_INFO_DATA(0):
696 case DP_TX_AUDIO_INFO_DATA(1):
697 case DP_TX_AUDIO_INFO_DATA(2):
698 case DP_TX_AUDIO_INFO_DATA(3):
699 case DP_TX_AUDIO_INFO_DATA(4):
700 case DP_TX_AUDIO_INFO_DATA(5):
701 case DP_TX_AUDIO_INFO_DATA(6):
702 case DP_TX_AUDIO_INFO_DATA(7):
703 case DP_TX_AUDIO_EXT_DATA(0):
704 case DP_TX_AUDIO_EXT_DATA(1):
705 case DP_TX_AUDIO_EXT_DATA(2):
706 case DP_TX_AUDIO_EXT_DATA(3):
707 case DP_TX_AUDIO_EXT_DATA(4):
708 case DP_TX_AUDIO_EXT_DATA(5):
709 case DP_TX_AUDIO_EXT_DATA(6):
710 case DP_TX_AUDIO_EXT_DATA(7):
711 case DP_TX_AUDIO_EXT_DATA(8):
712 /* write only registers */
713 ret = 0;
714 break;
715 default:
716 assert(offset <= (0x3AC >> 2));
717 ret = s->core_registers[offset];
718 break;
721 DPRINTF("core read @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset << 2, ret);
722 return ret;
725 static void xlnx_dp_write(void *opaque, hwaddr offset, uint64_t value,
726 unsigned size)
728 XlnxDPState *s = XLNX_DP(opaque);
730 DPRINTF("core write @%" PRIx64 " = 0x%8.8" PRIX64 "\n", offset, value);
732 offset = offset >> 2;
734 switch (offset) {
736 * Only special write case are handled.
738 case DP_LINK_BW_SET:
739 s->core_registers[offset] = value & 0x000000FF;
740 break;
741 case DP_LANE_COUNT_SET:
742 case DP_MAIN_STREAM_MISC0:
743 s->core_registers[offset] = value & 0x0000000F;
744 break;
745 case DP_TRAINING_PATTERN_SET:
746 case DP_LINK_QUAL_PATTERN_SET:
747 case DP_MAIN_STREAM_POLARITY:
748 case DP_PHY_VOLTAGE_DIFF_LANE_0:
749 case DP_PHY_VOLTAGE_DIFF_LANE_1:
750 s->core_registers[offset] = value & 0x00000003;
751 break;
752 case DP_ENHANCED_FRAME_EN:
753 case DP_SCRAMBLING_DISABLE:
754 case DP_DOWNSPREAD_CTRL:
755 case DP_MAIN_STREAM_ENABLE:
756 case DP_TRANSMIT_PRBS7:
757 s->core_registers[offset] = value & 0x00000001;
758 break;
759 case DP_PHY_CLOCK_SELECT:
760 s->core_registers[offset] = value & 0x00000007;
761 break;
762 case DP_SOFTWARE_RESET:
764 * No need to update this bit as it's read '0'.
767 * TODO: reset IP.
769 break;
770 case DP_TRANSMITTER_ENABLE:
771 s->core_registers[offset] = value & 0x01;
772 break;
773 case DP_FORCE_SCRAMBLER_RESET:
775 * No need to update this bit as it's read '0'.
778 * TODO: force a scrambler reset??
780 break;
781 case DP_AUX_COMMAND_REGISTER:
782 s->core_registers[offset] = value & 0x00001F0F;
783 xlnx_dp_aux_set_command(s, s->core_registers[offset]);
784 break;
785 case DP_MAIN_STREAM_HTOTAL:
786 case DP_MAIN_STREAM_VTOTAL:
787 case DP_MAIN_STREAM_HSTART:
788 case DP_MAIN_STREAM_VSTART:
789 s->core_registers[offset] = value & 0x0000FFFF;
790 break;
791 case DP_MAIN_STREAM_HRES:
792 case DP_MAIN_STREAM_VRES:
793 s->core_registers[offset] = value & 0x0000FFFF;
794 xlnx_dp_recreate_surface(s);
795 break;
796 case DP_MAIN_STREAM_HSWIDTH:
797 case DP_MAIN_STREAM_VSWIDTH:
798 s->core_registers[offset] = value & 0x00007FFF;
799 break;
800 case DP_MAIN_STREAM_MISC1:
801 s->core_registers[offset] = value & 0x00000086;
802 break;
803 case DP_MAIN_STREAM_M_VID:
804 case DP_MAIN_STREAM_N_VID:
805 s->core_registers[offset] = value & 0x00FFFFFF;
806 break;
807 case DP_MSA_TRANSFER_UNIT_SIZE:
808 case DP_MIN_BYTES_PER_TU:
809 case DP_INIT_WAIT:
810 s->core_registers[offset] = value & 0x00000007;
811 break;
812 case DP_USER_DATA_COUNT_PER_LANE:
813 s->core_registers[offset] = value & 0x0003FFFF;
814 break;
815 case DP_FRAC_BYTES_PER_TU:
816 s->core_registers[offset] = value & 0x000003FF;
817 break;
818 case DP_PHY_RESET:
819 s->core_registers[offset] = value & 0x00010003;
821 * TODO: Reset something?
823 break;
824 case DP_TX_PHY_POWER_DOWN:
825 s->core_registers[offset] = value & 0x0000000F;
827 * TODO: Power down things?
829 break;
830 case DP_AUX_WRITE_FIFO: {
831 uint8_t c = value;
832 xlnx_dp_aux_push_tx_fifo(s, &c, 1);
833 break;
835 case DP_AUX_CLOCK_DIVIDER:
836 break;
837 case DP_AUX_REPLY_COUNT:
839 * Writing to this register clear the counter.
841 s->core_registers[offset] = 0x00000000;
842 break;
843 case DP_AUX_ADDRESS:
844 s->core_registers[offset] = value & 0x000FFFFF;
845 break;
846 case DP_VERSION_REGISTER:
847 case DP_CORE_ID:
848 case DP_TX_USER_FIFO_OVERFLOW:
849 case DP_AUX_REPLY_DATA:
850 case DP_AUX_REPLY_CODE:
851 case DP_REPLY_DATA_COUNT:
852 case DP_REPLY_STATUS:
853 case DP_HPD_DURATION:
855 * Write to read only location..
857 break;
858 case DP_TX_AUDIO_CONTROL:
859 s->core_registers[offset] = value & 0x00000001;
860 xlnx_dp_audio_activate(s);
861 break;
862 case DP_TX_AUDIO_CHANNELS:
863 s->core_registers[offset] = value & 0x00000007;
864 xlnx_dp_audio_activate(s);
865 break;
866 case DP_INT_STATUS:
867 s->core_registers[DP_INT_STATUS] &= ~value;
868 xlnx_dp_update_irq(s);
869 break;
870 case DP_INT_EN:
871 s->core_registers[DP_INT_MASK] &= ~value;
872 xlnx_dp_update_irq(s);
873 break;
874 case DP_INT_DS:
875 s->core_registers[DP_INT_MASK] |= ~value;
876 xlnx_dp_update_irq(s);
877 break;
878 default:
879 assert(offset <= (0x504C >> 2));
880 s->core_registers[offset] = value;
881 break;
885 static const MemoryRegionOps dp_ops = {
886 .read = xlnx_dp_read,
887 .write = xlnx_dp_write,
888 .endianness = DEVICE_NATIVE_ENDIAN,
889 .valid = {
890 .min_access_size = 4,
891 .max_access_size = 4,
893 .impl = {
894 .min_access_size = 4,
895 .max_access_size = 4,
900 * This is to handle Read/Write to the Video Blender.
902 static void xlnx_dp_vblend_write(void *opaque, hwaddr offset,
903 uint64_t value, unsigned size)
905 XlnxDPState *s = XLNX_DP(opaque);
906 bool alpha_was_enabled;
908 DPRINTF("vblend: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
909 (uint32_t)value);
910 offset = offset >> 2;
912 switch (offset) {
913 case V_BLEND_BG_CLR_0:
914 case V_BLEND_BG_CLR_1:
915 case V_BLEND_BG_CLR_2:
916 s->vblend_registers[offset] = value & 0x00000FFF;
917 break;
918 case V_BLEND_SET_GLOBAL_ALPHA_REG:
920 * A write to this register can enable or disable blending. Thus we need
921 * to recreate the surfaces.
923 alpha_was_enabled = xlnx_dp_global_alpha_enabled(s);
924 s->vblend_registers[offset] = value & 0x000001FF;
925 if (xlnx_dp_global_alpha_enabled(s) != alpha_was_enabled) {
926 xlnx_dp_recreate_surface(s);
928 break;
929 case V_BLEND_OUTPUT_VID_FORMAT:
930 s->vblend_registers[offset] = value & 0x00000017;
931 break;
932 case V_BLEND_LAYER0_CONTROL:
933 case V_BLEND_LAYER1_CONTROL:
934 s->vblend_registers[offset] = value & 0x00000103;
935 break;
936 case V_BLEND_RGB2YCBCR_COEFF(0):
937 case V_BLEND_RGB2YCBCR_COEFF(1):
938 case V_BLEND_RGB2YCBCR_COEFF(2):
939 case V_BLEND_RGB2YCBCR_COEFF(3):
940 case V_BLEND_RGB2YCBCR_COEFF(4):
941 case V_BLEND_RGB2YCBCR_COEFF(5):
942 case V_BLEND_RGB2YCBCR_COEFF(6):
943 case V_BLEND_RGB2YCBCR_COEFF(7):
944 case V_BLEND_RGB2YCBCR_COEFF(8):
945 case V_BLEND_IN1CSC_COEFF(0):
946 case V_BLEND_IN1CSC_COEFF(1):
947 case V_BLEND_IN1CSC_COEFF(2):
948 case V_BLEND_IN1CSC_COEFF(3):
949 case V_BLEND_IN1CSC_COEFF(4):
950 case V_BLEND_IN1CSC_COEFF(5):
951 case V_BLEND_IN1CSC_COEFF(6):
952 case V_BLEND_IN1CSC_COEFF(7):
953 case V_BLEND_IN1CSC_COEFF(8):
954 case V_BLEND_IN2CSC_COEFF(0):
955 case V_BLEND_IN2CSC_COEFF(1):
956 case V_BLEND_IN2CSC_COEFF(2):
957 case V_BLEND_IN2CSC_COEFF(3):
958 case V_BLEND_IN2CSC_COEFF(4):
959 case V_BLEND_IN2CSC_COEFF(5):
960 case V_BLEND_IN2CSC_COEFF(6):
961 case V_BLEND_IN2CSC_COEFF(7):
962 case V_BLEND_IN2CSC_COEFF(8):
963 s->vblend_registers[offset] = value & 0x0000FFFF;
964 break;
965 case V_BLEND_LUMA_IN1CSC_OFFSET:
966 case V_BLEND_CR_IN1CSC_OFFSET:
967 case V_BLEND_CB_IN1CSC_OFFSET:
968 case V_BLEND_LUMA_IN2CSC_OFFSET:
969 case V_BLEND_CR_IN2CSC_OFFSET:
970 case V_BLEND_CB_IN2CSC_OFFSET:
971 case V_BLEND_LUMA_OUTCSC_OFFSET:
972 case V_BLEND_CR_OUTCSC_OFFSET:
973 case V_BLEND_CB_OUTCSC_OFFSET:
974 s->vblend_registers[offset] = value & 0x3FFF7FFF;
975 break;
976 case V_BLEND_CHROMA_KEY_ENABLE:
977 s->vblend_registers[offset] = value & 0x00000003;
978 break;
979 case V_BLEND_CHROMA_KEY_COMP1:
980 case V_BLEND_CHROMA_KEY_COMP2:
981 case V_BLEND_CHROMA_KEY_COMP3:
982 s->vblend_registers[offset] = value & 0x0FFF0FFF;
983 break;
984 default:
985 s->vblend_registers[offset] = value;
986 break;
990 static uint64_t xlnx_dp_vblend_read(void *opaque, hwaddr offset,
991 unsigned size)
993 XlnxDPState *s = XLNX_DP(opaque);
995 DPRINTF("vblend: read @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
996 s->vblend_registers[offset >> 2]);
997 return s->vblend_registers[offset >> 2];
1000 static const MemoryRegionOps vblend_ops = {
1001 .read = xlnx_dp_vblend_read,
1002 .write = xlnx_dp_vblend_write,
1003 .endianness = DEVICE_NATIVE_ENDIAN,
1004 .valid = {
1005 .min_access_size = 4,
1006 .max_access_size = 4,
1008 .impl = {
1009 .min_access_size = 4,
1010 .max_access_size = 4,
1015 * This is to handle Read/Write to the Audio Video buffer manager.
1017 static void xlnx_dp_avbufm_write(void *opaque, hwaddr offset, uint64_t value,
1018 unsigned size)
1020 XlnxDPState *s = XLNX_DP(opaque);
1022 DPRINTF("avbufm: write @0x%" HWADDR_PRIX " = 0x%" PRIX32 "\n", offset,
1023 (uint32_t)value);
1024 offset = offset >> 2;
1026 switch (offset) {
1027 case AV_BUF_FORMAT:
1028 s->avbufm_registers[offset] = value & 0x00000FFF;
1029 xlnx_dp_change_graphic_fmt(s);
1030 break;
1031 case AV_CHBUF0:
1032 case AV_CHBUF1:
1033 case AV_CHBUF2:
1034 case AV_CHBUF3:
1035 case AV_CHBUF4:
1036 case AV_CHBUF5:
1037 s->avbufm_registers[offset] = value & 0x0000007F;
1038 break;
1039 case AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT:
1040 s->avbufm_registers[offset] = value & 0x0000007F;
1041 break;
1042 case AV_BUF_DITHER_CONFIG:
1043 s->avbufm_registers[offset] = value & 0x000007FF;
1044 break;
1045 case AV_BUF_DITHER_CONFIG_MAX:
1046 case AV_BUF_DITHER_CONFIG_MIN:
1047 s->avbufm_registers[offset] = value & 0x00000FFF;
1048 break;
1049 case AV_BUF_PATTERN_GEN_SELECT:
1050 s->avbufm_registers[offset] = value & 0xFFFFFF03;
1051 break;
1052 case AV_BUF_AUD_VID_CLK_SOURCE:
1053 s->avbufm_registers[offset] = value & 0x00000007;
1054 break;
1055 case AV_BUF_SRST_REG:
1056 s->avbufm_registers[offset] = value & 0x00000002;
1057 break;
1058 case AV_BUF_AUDIO_CH_CONFIG:
1059 s->avbufm_registers[offset] = value & 0x00000003;
1060 break;
1061 case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0):
1062 case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1):
1063 case AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2):
1064 case AV_BUF_VIDEO_COMP_SCALE_FACTOR(0):
1065 case AV_BUF_VIDEO_COMP_SCALE_FACTOR(1):
1066 case AV_BUF_VIDEO_COMP_SCALE_FACTOR(2):
1067 s->avbufm_registers[offset] = value & 0x0000FFFF;
1068 break;
1069 case AV_BUF_LIVE_VIDEO_COMP_SF(0):
1070 case AV_BUF_LIVE_VIDEO_COMP_SF(1):
1071 case AV_BUF_LIVE_VIDEO_COMP_SF(2):
1072 case AV_BUF_LIVE_VID_CONFIG:
1073 case AV_BUF_LIVE_GFX_COMP_SF(0):
1074 case AV_BUF_LIVE_GFX_COMP_SF(1):
1075 case AV_BUF_LIVE_GFX_COMP_SF(2):
1076 case AV_BUF_LIVE_GFX_CONFIG:
1077 case AV_BUF_NON_LIVE_LATENCY:
1078 case AV_BUF_STC_CONTROL:
1079 case AV_BUF_STC_INIT_VALUE0:
1080 case AV_BUF_STC_INIT_VALUE1:
1081 case AV_BUF_STC_ADJ:
1082 case AV_BUF_STC_VIDEO_VSYNC_TS_REG0:
1083 case AV_BUF_STC_VIDEO_VSYNC_TS_REG1:
1084 case AV_BUF_STC_EXT_VSYNC_TS_REG0:
1085 case AV_BUF_STC_EXT_VSYNC_TS_REG1:
1086 case AV_BUF_STC_CUSTOM_EVENT_TS_REG0:
1087 case AV_BUF_STC_CUSTOM_EVENT_TS_REG1:
1088 case AV_BUF_STC_CUSTOM_EVENT2_TS_REG0:
1089 case AV_BUF_STC_CUSTOM_EVENT2_TS_REG1:
1090 case AV_BUF_STC_SNAPSHOT0:
1091 case AV_BUF_STC_SNAPSHOT1:
1092 case AV_BUF_HCOUNT_VCOUNT_INT0:
1093 case AV_BUF_HCOUNT_VCOUNT_INT1:
1094 qemu_log_mask(LOG_UNIMP, "avbufm: unimplemented register 0x%04"
1095 PRIx64 "\n",
1096 offset << 2);
1097 break;
1098 default:
1099 s->avbufm_registers[offset] = value;
1100 break;
1104 static uint64_t xlnx_dp_avbufm_read(void *opaque, hwaddr offset,
1105 unsigned size)
1107 XlnxDPState *s = XLNX_DP(opaque);
1109 offset = offset >> 2;
1110 return s->avbufm_registers[offset];
1113 static const MemoryRegionOps avbufm_ops = {
1114 .read = xlnx_dp_avbufm_read,
1115 .write = xlnx_dp_avbufm_write,
1116 .endianness = DEVICE_NATIVE_ENDIAN,
1117 .valid = {
1118 .min_access_size = 4,
1119 .max_access_size = 4,
1121 .impl = {
1122 .min_access_size = 4,
1123 .max_access_size = 4,
1128 * This is a global alpha blending using pixman.
1129 * Both graphic and video planes are multiplied with the global alpha
1130 * coefficient and added.
1132 static inline void xlnx_dp_blend_surface(XlnxDPState *s)
1134 pixman_fixed_t alpha1[] = { pixman_double_to_fixed(1),
1135 pixman_double_to_fixed(1),
1136 pixman_double_to_fixed(1.0) };
1137 pixman_fixed_t alpha2[] = { pixman_double_to_fixed(1),
1138 pixman_double_to_fixed(1),
1139 pixman_double_to_fixed(1.0) };
1141 if ((surface_width(s->g_plane.surface)
1142 != surface_width(s->v_plane.surface)) ||
1143 (surface_height(s->g_plane.surface)
1144 != surface_height(s->v_plane.surface))) {
1145 return;
1148 alpha1[2] = pixman_double_to_fixed((double)(xlnx_dp_global_alpha_value(s))
1149 / 256.0);
1150 alpha2[2] = pixman_double_to_fixed((255.0
1151 - (double)xlnx_dp_global_alpha_value(s))
1152 / 256.0);
1154 pixman_image_set_filter(s->g_plane.surface->image,
1155 PIXMAN_FILTER_CONVOLUTION, alpha1, 3);
1156 pixman_image_composite(PIXMAN_OP_SRC, s->g_plane.surface->image, 0,
1157 s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1158 surface_width(s->g_plane.surface),
1159 surface_height(s->g_plane.surface));
1160 pixman_image_set_filter(s->v_plane.surface->image,
1161 PIXMAN_FILTER_CONVOLUTION, alpha2, 3);
1162 pixman_image_composite(PIXMAN_OP_ADD, s->v_plane.surface->image, 0,
1163 s->bout_plane.surface->image, 0, 0, 0, 0, 0, 0,
1164 surface_width(s->g_plane.surface),
1165 surface_height(s->g_plane.surface));
1168 static void xlnx_dp_update_display(void *opaque)
1170 XlnxDPState *s = XLNX_DP(opaque);
1172 if ((s->core_registers[DP_TRANSMITTER_ENABLE] & 0x01) == 0) {
1173 return;
1176 s->core_registers[DP_INT_STATUS] |= (1 << 13);
1177 xlnx_dp_update_irq(s);
1179 xlnx_dpdma_trigger_vsync_irq(s->dpdma);
1182 * Trigger the DMA channel.
1184 if (!xlnx_dpdma_start_operation(s->dpdma, 3, false)) {
1186 * An error occurred don't do anything with the data..
1187 * Trigger an underflow interrupt.
1189 s->core_registers[DP_INT_STATUS] |= (1 << 21);
1190 xlnx_dp_update_irq(s);
1191 return;
1194 if (xlnx_dp_global_alpha_enabled(s)) {
1195 if (!xlnx_dpdma_start_operation(s->dpdma, 0, false)) {
1196 s->core_registers[DP_INT_STATUS] |= (1 << 21);
1197 xlnx_dp_update_irq(s);
1198 return;
1200 xlnx_dp_blend_surface(s);
1204 * XXX: We might want to update only what changed.
1206 dpy_gfx_update_full(s->console);
1209 static const GraphicHwOps xlnx_dp_gfx_ops = {
1210 .gfx_update = xlnx_dp_update_display,
1213 static void xlnx_dp_init(Object *obj)
1215 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
1216 XlnxDPState *s = XLNX_DP(obj);
1218 memory_region_init(&s->container, obj, TYPE_XLNX_DP, 0xC050);
1220 memory_region_init_io(&s->core_iomem, obj, &dp_ops, s, TYPE_XLNX_DP
1221 ".core", 0x3AF);
1222 memory_region_add_subregion(&s->container, 0x0000, &s->core_iomem);
1224 memory_region_init_io(&s->vblend_iomem, obj, &vblend_ops, s, TYPE_XLNX_DP
1225 ".v_blend", 0x1DF);
1226 memory_region_add_subregion(&s->container, 0xA000, &s->vblend_iomem);
1228 memory_region_init_io(&s->avbufm_iomem, obj, &avbufm_ops, s, TYPE_XLNX_DP
1229 ".av_buffer_manager", 0x238);
1230 memory_region_add_subregion(&s->container, 0xB000, &s->avbufm_iomem);
1232 memory_region_init_io(&s->audio_iomem, obj, &audio_ops, s, TYPE_XLNX_DP
1233 ".audio", sizeof(s->audio_registers));
1234 memory_region_add_subregion(&s->container, 0xC000, &s->audio_iomem);
1236 sysbus_init_mmio(sbd, &s->container);
1237 sysbus_init_irq(sbd, &s->irq);
1239 object_property_add_link(obj, "dpdma", TYPE_XLNX_DPDMA,
1240 (Object **) &s->dpdma,
1241 xlnx_dp_set_dpdma,
1242 OBJ_PROP_LINK_STRONG);
1245 * Initialize AUX Bus.
1247 s->aux_bus = aux_bus_init(DEVICE(obj), "aux");
1250 * Initialize DPCD and EDID..
1252 s->dpcd = DPCD(qdev_new("dpcd"));
1253 object_property_add_child(OBJECT(s), "dpcd", OBJECT(s->dpcd));
1255 s->edid = I2CDDC(qdev_new("i2c-ddc"));
1256 i2c_set_slave_address(I2C_SLAVE(s->edid), 0x50);
1257 object_property_add_child(OBJECT(s), "edid", OBJECT(s->edid));
1259 fifo8_create(&s->rx_fifo, 16);
1260 fifo8_create(&s->tx_fifo, 16);
1263 static void xlnx_dp_realize(DeviceState *dev, Error **errp)
1265 XlnxDPState *s = XLNX_DP(dev);
1266 DisplaySurface *surface;
1267 struct audsettings as;
1269 aux_bus_realize(s->aux_bus);
1271 qdev_realize(DEVICE(s->dpcd), BUS(s->aux_bus), &error_fatal);
1272 aux_map_slave(AUX_SLAVE(s->dpcd), 0x0000);
1274 qdev_realize_and_unref(DEVICE(s->edid), BUS(aux_get_i2c_bus(s->aux_bus)),
1275 &error_fatal);
1277 s->console = graphic_console_init(dev, 0, &xlnx_dp_gfx_ops, s);
1278 surface = qemu_console_surface(s->console);
1279 xlnx_dpdma_set_host_data_location(s->dpdma, DP_GRAPHIC_DMA_CHANNEL,
1280 surface_data(surface));
1282 as.freq = 44100;
1283 as.nchannels = 2;
1284 as.fmt = AUDIO_FORMAT_S16;
1285 as.endianness = 0;
1287 AUD_register_card("xlnx_dp.audio", &s->aud_card);
1289 s->amixer_output_stream = AUD_open_out(&s->aud_card,
1290 s->amixer_output_stream,
1291 "xlnx_dp.audio.out",
1293 xlnx_dp_audio_callback,
1294 &as);
1295 AUD_set_volume_out(s->amixer_output_stream, 0, 255, 255);
1296 xlnx_dp_audio_activate(s);
1299 static void xlnx_dp_reset(DeviceState *dev)
1301 XlnxDPState *s = XLNX_DP(dev);
1303 memset(s->core_registers, 0, sizeof(s->core_registers));
1304 s->core_registers[DP_VERSION_REGISTER] = 0x04010000;
1305 s->core_registers[DP_CORE_ID] = 0x01020000;
1306 s->core_registers[DP_REPLY_STATUS] = 0x00000010;
1307 s->core_registers[DP_MSA_TRANSFER_UNIT_SIZE] = 0x00000040;
1308 s->core_registers[DP_INIT_WAIT] = 0x00000020;
1309 s->core_registers[DP_PHY_RESET] = 0x00010003;
1310 s->core_registers[DP_INT_MASK] = 0xFFFFF03F;
1311 s->core_registers[DP_PHY_STATUS] = 0x00000043;
1312 s->core_registers[DP_INTERRUPT_SIGNAL_STATE] = 0x00000001;
1314 s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(0)] = 0x00001000;
1315 s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(4)] = 0x00001000;
1316 s->vblend_registers[V_BLEND_RGB2YCBCR_COEFF(8)] = 0x00001000;
1317 s->vblend_registers[V_BLEND_IN1CSC_COEFF(0)] = 0x00001000;
1318 s->vblend_registers[V_BLEND_IN1CSC_COEFF(4)] = 0x00001000;
1319 s->vblend_registers[V_BLEND_IN1CSC_COEFF(8)] = 0x00001000;
1320 s->vblend_registers[V_BLEND_IN2CSC_COEFF(0)] = 0x00001000;
1321 s->vblend_registers[V_BLEND_IN2CSC_COEFF(4)] = 0x00001000;
1322 s->vblend_registers[V_BLEND_IN2CSC_COEFF(8)] = 0x00001000;
1324 s->avbufm_registers[AV_BUF_NON_LIVE_LATENCY] = 0x00000180;
1325 s->avbufm_registers[AV_BUF_OUTPUT_AUDIO_VIDEO_SELECT] = 0x00000008;
1326 s->avbufm_registers[AV_BUF_DITHER_CONFIG_MAX] = 0x00000FFF;
1327 s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(0)] = 0x00010101;
1328 s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(1)] = 0x00010101;
1329 s->avbufm_registers[AV_BUF_GRAPHICS_COMP_SCALE_FACTOR(2)] = 0x00010101;
1330 s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(0)] = 0x00010101;
1331 s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(1)] = 0x00010101;
1332 s->avbufm_registers[AV_BUF_VIDEO_COMP_SCALE_FACTOR(2)] = 0x00010101;
1333 s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(0)] = 0x00010101;
1334 s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(1)] = 0x00010101;
1335 s->avbufm_registers[AV_BUF_LIVE_VIDEO_COMP_SF(2)] = 0x00010101;
1336 s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(0)] = 0x00010101;
1337 s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(1)] = 0x00010101;
1338 s->avbufm_registers[AV_BUF_LIVE_GFX_COMP_SF(2)] = 0x00010101;
1340 memset(s->audio_registers, 0, sizeof(s->audio_registers));
1341 s->byte_left = 0;
1343 xlnx_dp_aux_clear_rx_fifo(s);
1344 xlnx_dp_change_graphic_fmt(s);
1345 xlnx_dp_update_irq(s);
1348 static void xlnx_dp_class_init(ObjectClass *oc, void *data)
1350 DeviceClass *dc = DEVICE_CLASS(oc);
1352 dc->realize = xlnx_dp_realize;
1353 dc->vmsd = &vmstate_dp;
1354 dc->reset = xlnx_dp_reset;
1357 static const TypeInfo xlnx_dp_info = {
1358 .name = TYPE_XLNX_DP,
1359 .parent = TYPE_SYS_BUS_DEVICE,
1360 .instance_size = sizeof(XlnxDPState),
1361 .instance_init = xlnx_dp_init,
1362 .class_init = xlnx_dp_class_init,
1365 static void xlnx_dp_register_types(void)
1367 type_register_static(&xlnx_dp_info);
1370 type_init(xlnx_dp_register_types)