hw/arm/virt: fix pl031 addr typo
[qemu/ar7.git] / block.c
blob8cf519ba3a8a7001429ac4f94382424962941403
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 bdrv_get_aio_context(bs),
183 QEMU_CLOCK_VIRTUAL,
184 bdrv_throttle_read_timer_cb,
185 bdrv_throttle_write_timer_cb,
186 bs);
187 bs->io_limits_enabled = true;
190 /* This function makes an IO wait if needed
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196 unsigned int bytes,
197 bool is_write)
199 /* does this io must wait */
200 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
202 /* if must wait or any request of this type throttled queue the IO */
203 if (must_wait ||
204 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs->throttle_state, is_write, bytes);
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214 return;
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
223 if (!bs || !bs->drv) {
224 /* 4k should be on the safe side */
225 return 4096;
228 return bs->bl.opt_mem_alignment;
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
234 const char *p;
236 #ifdef _WIN32
237 if (is_windows_drive(path) ||
238 is_windows_drive_prefix(path)) {
239 return 0;
241 p = path + strcspn(path, ":/\\");
242 #else
243 p = path + strcspn(path, ":/");
244 #endif
246 return *p == ':';
249 int path_is_absolute(const char *path)
251 #ifdef _WIN32
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254 return 1;
256 return (*path == '/' || *path == '\\');
257 #else
258 return (*path == '/');
259 #endif
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
264 supported. */
265 void path_combine(char *dest, int dest_size,
266 const char *base_path,
267 const char *filename)
269 const char *p, *p1;
270 int len;
272 if (dest_size <= 0)
273 return;
274 if (path_is_absolute(filename)) {
275 pstrcpy(dest, dest_size, filename);
276 } else {
277 p = strchr(base_path, ':');
278 if (p)
279 p++;
280 else
281 p = base_path;
282 p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
285 const char *p2;
286 p2 = strrchr(base_path, '\\');
287 if (!p1 || p2 > p1)
288 p1 = p2;
290 #endif
291 if (p1)
292 p1++;
293 else
294 p1 = base_path;
295 if (p1 > p)
296 p = p1;
297 len = p - base_path;
298 if (len > dest_size - 1)
299 len = dest_size - 1;
300 memcpy(dest, base_path, len);
301 dest[len] = '\0';
302 pstrcat(dest, dest_size, filename);
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
308 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309 pstrcpy(dest, sz, bs->backing_file);
310 } else {
311 path_combine(dest, sz, bs->filename, bs->backing_file);
315 void bdrv_register(BlockDriver *bdrv)
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv->bdrv_co_readv) {
319 bdrv->bdrv_co_readv = bdrv_co_readv_em;
320 bdrv->bdrv_co_writev = bdrv_co_writev_em;
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
325 if (!bdrv->bdrv_aio_readv) {
326 /* add AIO emulation layer */
327 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
332 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
338 BlockDriverState *bs;
339 int i;
341 if (bdrv_find(device_name)) {
342 error_setg(errp, "Device with id '%s' already exists",
343 device_name);
344 return NULL;
346 if (bdrv_find_node(device_name)) {
347 error_setg(errp, "Device with node-name '%s' already exists",
348 device_name);
349 return NULL;
352 bs = g_malloc0(sizeof(BlockDriverState));
353 QLIST_INIT(&bs->dirty_bitmaps);
354 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355 if (device_name[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
358 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359 QLIST_INIT(&bs->op_blockers[i]);
361 bdrv_iostatus_disable(bs);
362 notifier_list_init(&bs->close_notifiers);
363 notifier_with_return_list_init(&bs->before_write_notifiers);
364 qemu_co_queue_init(&bs->throttled_reqs[0]);
365 qemu_co_queue_init(&bs->throttled_reqs[1]);
366 bs->refcnt = 1;
367 bs->aio_context = qemu_get_aio_context();
369 return bs;
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
374 notifier_list_add(&bs->close_notifiers, notify);
377 BlockDriver *bdrv_find_format(const char *format_name)
379 BlockDriver *drv1;
380 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381 if (!strcmp(drv1->format_name, format_name)) {
382 return drv1;
385 return NULL;
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
390 static const char *whitelist_rw[] = {
391 CONFIG_BDRV_RW_WHITELIST
393 static const char *whitelist_ro[] = {
394 CONFIG_BDRV_RO_WHITELIST
396 const char **p;
398 if (!whitelist_rw[0] && !whitelist_ro[0]) {
399 return 1; /* no whitelist, anything goes */
402 for (p = whitelist_rw; *p; p++) {
403 if (!strcmp(drv->format_name, *p)) {
404 return 1;
407 if (read_only) {
408 for (p = whitelist_ro; *p; p++) {
409 if (!strcmp(drv->format_name, *p)) {
410 return 1;
414 return 0;
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418 bool read_only)
420 BlockDriver *drv = bdrv_find_format(format_name);
421 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
424 typedef struct CreateCo {
425 BlockDriver *drv;
426 char *filename;
427 QemuOpts *opts;
428 int ret;
429 Error *err;
430 } CreateCo;
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
434 Error *local_err = NULL;
435 int ret;
437 CreateCo *cco = opaque;
438 assert(cco->drv);
440 ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441 if (local_err) {
442 error_propagate(&cco->err, local_err);
444 cco->ret = ret;
447 int bdrv_create(BlockDriver *drv, const char* filename,
448 QemuOpts *opts, Error **errp)
450 int ret;
452 Coroutine *co;
453 CreateCo cco = {
454 .drv = drv,
455 .filename = g_strdup(filename),
456 .opts = opts,
457 .ret = NOT_DONE,
458 .err = NULL,
461 if (!drv->bdrv_create) {
462 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463 ret = -ENOTSUP;
464 goto out;
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco);
470 } else {
471 co = qemu_coroutine_create(bdrv_create_co_entry);
472 qemu_coroutine_enter(co, &cco);
473 while (cco.ret == NOT_DONE) {
474 aio_poll(qemu_get_aio_context(), true);
478 ret = cco.ret;
479 if (ret < 0) {
480 if (cco.err) {
481 error_propagate(errp, cco.err);
482 } else {
483 error_setg_errno(errp, -ret, "Could not create image");
487 out:
488 g_free(cco.filename);
489 return ret;
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
494 BlockDriver *drv;
495 Error *local_err = NULL;
496 int ret;
498 drv = bdrv_find_protocol(filename, true);
499 if (drv == NULL) {
500 error_setg(errp, "Could not find protocol for file '%s'", filename);
501 return -ENOENT;
504 ret = bdrv_create(drv, filename, opts, &local_err);
505 if (local_err) {
506 error_propagate(errp, local_err);
508 return ret;
511 void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
513 BlockDriver *drv = bs->drv;
514 Error *local_err = NULL;
516 memset(&bs->bl, 0, sizeof(bs->bl));
518 if (!drv) {
519 return;
522 /* Take some limits from the children as a default */
523 if (bs->file) {
524 bdrv_refresh_limits(bs->file, &local_err);
525 if (local_err) {
526 error_propagate(errp, local_err);
527 return;
529 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
530 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
531 } else {
532 bs->bl.opt_mem_alignment = 512;
535 if (bs->backing_hd) {
536 bdrv_refresh_limits(bs->backing_hd, &local_err);
537 if (local_err) {
538 error_propagate(errp, local_err);
539 return;
541 bs->bl.opt_transfer_length =
542 MAX(bs->bl.opt_transfer_length,
543 bs->backing_hd->bl.opt_transfer_length);
544 bs->bl.opt_mem_alignment =
545 MAX(bs->bl.opt_mem_alignment,
546 bs->backing_hd->bl.opt_mem_alignment);
549 /* Then let the driver override it */
550 if (drv->bdrv_refresh_limits) {
551 drv->bdrv_refresh_limits(bs, errp);
556 * Create a uniquely-named empty temporary file.
557 * Return 0 upon success, otherwise a negative errno value.
559 int get_tmp_filename(char *filename, int size)
561 #ifdef _WIN32
562 char temp_dir[MAX_PATH];
563 /* GetTempFileName requires that its output buffer (4th param)
564 have length MAX_PATH or greater. */
565 assert(size >= MAX_PATH);
566 return (GetTempPath(MAX_PATH, temp_dir)
567 && GetTempFileName(temp_dir, "qem", 0, filename)
568 ? 0 : -GetLastError());
569 #else
570 int fd;
571 const char *tmpdir;
572 tmpdir = getenv("TMPDIR");
573 if (!tmpdir) {
574 tmpdir = "/var/tmp";
576 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
577 return -EOVERFLOW;
579 fd = mkstemp(filename);
580 if (fd < 0) {
581 return -errno;
583 if (close(fd) != 0) {
584 unlink(filename);
585 return -errno;
587 return 0;
588 #endif
592 * Detect host devices. By convention, /dev/cdrom[N] is always
593 * recognized as a host CDROM.
595 static BlockDriver *find_hdev_driver(const char *filename)
597 int score_max = 0, score;
598 BlockDriver *drv = NULL, *d;
600 QLIST_FOREACH(d, &bdrv_drivers, list) {
601 if (d->bdrv_probe_device) {
602 score = d->bdrv_probe_device(filename);
603 if (score > score_max) {
604 score_max = score;
605 drv = d;
610 return drv;
613 BlockDriver *bdrv_find_protocol(const char *filename,
614 bool allow_protocol_prefix)
616 BlockDriver *drv1;
617 char protocol[128];
618 int len;
619 const char *p;
621 /* TODO Drivers without bdrv_file_open must be specified explicitly */
624 * XXX(hch): we really should not let host device detection
625 * override an explicit protocol specification, but moving this
626 * later breaks access to device names with colons in them.
627 * Thanks to the brain-dead persistent naming schemes on udev-
628 * based Linux systems those actually are quite common.
630 drv1 = find_hdev_driver(filename);
631 if (drv1) {
632 return drv1;
635 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
636 return bdrv_find_format("file");
639 p = strchr(filename, ':');
640 assert(p != NULL);
641 len = p - filename;
642 if (len > sizeof(protocol) - 1)
643 len = sizeof(protocol) - 1;
644 memcpy(protocol, filename, len);
645 protocol[len] = '\0';
646 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
647 if (drv1->protocol_name &&
648 !strcmp(drv1->protocol_name, protocol)) {
649 return drv1;
652 return NULL;
655 static int find_image_format(BlockDriverState *bs, const char *filename,
656 BlockDriver **pdrv, Error **errp)
658 int score, score_max;
659 BlockDriver *drv1, *drv;
660 uint8_t buf[2048];
661 int ret = 0;
663 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
664 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
665 drv = bdrv_find_format("raw");
666 if (!drv) {
667 error_setg(errp, "Could not find raw image format");
668 ret = -ENOENT;
670 *pdrv = drv;
671 return ret;
674 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
675 if (ret < 0) {
676 error_setg_errno(errp, -ret, "Could not read image for determining its "
677 "format");
678 *pdrv = NULL;
679 return ret;
682 score_max = 0;
683 drv = NULL;
684 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
685 if (drv1->bdrv_probe) {
686 score = drv1->bdrv_probe(buf, ret, filename);
687 if (score > score_max) {
688 score_max = score;
689 drv = drv1;
693 if (!drv) {
694 error_setg(errp, "Could not determine image format: No compatible "
695 "driver found");
696 ret = -ENOENT;
698 *pdrv = drv;
699 return ret;
703 * Set the current 'total_sectors' value
705 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
707 BlockDriver *drv = bs->drv;
709 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
710 if (bs->sg)
711 return 0;
713 /* query actual device if possible, otherwise just trust the hint */
714 if (drv->bdrv_getlength) {
715 int64_t length = drv->bdrv_getlength(bs);
716 if (length < 0) {
717 return length;
719 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
722 bs->total_sectors = hint;
723 return 0;
727 * Set open flags for a given discard mode
729 * Return 0 on success, -1 if the discard mode was invalid.
731 int bdrv_parse_discard_flags(const char *mode, int *flags)
733 *flags &= ~BDRV_O_UNMAP;
735 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
736 /* do nothing */
737 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
738 *flags |= BDRV_O_UNMAP;
739 } else {
740 return -1;
743 return 0;
747 * Set open flags for a given cache mode
749 * Return 0 on success, -1 if the cache mode was invalid.
751 int bdrv_parse_cache_flags(const char *mode, int *flags)
753 *flags &= ~BDRV_O_CACHE_MASK;
755 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
756 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
757 } else if (!strcmp(mode, "directsync")) {
758 *flags |= BDRV_O_NOCACHE;
759 } else if (!strcmp(mode, "writeback")) {
760 *flags |= BDRV_O_CACHE_WB;
761 } else if (!strcmp(mode, "unsafe")) {
762 *flags |= BDRV_O_CACHE_WB;
763 *flags |= BDRV_O_NO_FLUSH;
764 } else if (!strcmp(mode, "writethrough")) {
765 /* this is the default */
766 } else {
767 return -1;
770 return 0;
774 * The copy-on-read flag is actually a reference count so multiple users may
775 * use the feature without worrying about clobbering its previous state.
776 * Copy-on-read stays enabled until all users have called to disable it.
778 void bdrv_enable_copy_on_read(BlockDriverState *bs)
780 bs->copy_on_read++;
783 void bdrv_disable_copy_on_read(BlockDriverState *bs)
785 assert(bs->copy_on_read > 0);
786 bs->copy_on_read--;
790 * Returns the flags that a temporary snapshot should get, based on the
791 * originally requested flags (the originally requested image will have flags
792 * like a backing file)
794 static int bdrv_temp_snapshot_flags(int flags)
796 return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
800 * Returns the flags that bs->file should get, based on the given flags for
801 * the parent BDS
803 static int bdrv_inherited_flags(int flags)
805 /* Enable protocol handling, disable format probing for bs->file */
806 flags |= BDRV_O_PROTOCOL;
808 /* Our block drivers take care to send flushes and respect unmap policy,
809 * so we can enable both unconditionally on lower layers. */
810 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
812 /* Clear flags that only apply to the top layer */
813 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
815 return flags;
819 * Returns the flags that bs->backing_hd should get, based on the given flags
820 * for the parent BDS
822 static int bdrv_backing_flags(int flags)
824 /* backing files always opened read-only */
825 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
827 /* snapshot=on is handled on the top layer */
828 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
830 return flags;
833 static int bdrv_open_flags(BlockDriverState *bs, int flags)
835 int open_flags = flags | BDRV_O_CACHE_WB;
838 * Clear flags that are internal to the block layer before opening the
839 * image.
841 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
844 * Snapshots should be writable.
846 if (flags & BDRV_O_TEMPORARY) {
847 open_flags |= BDRV_O_RDWR;
850 return open_flags;
853 static void bdrv_assign_node_name(BlockDriverState *bs,
854 const char *node_name,
855 Error **errp)
857 if (!node_name) {
858 return;
861 /* empty string node name is invalid */
862 if (node_name[0] == '\0') {
863 error_setg(errp, "Empty node name");
864 return;
867 /* takes care of avoiding namespaces collisions */
868 if (bdrv_find(node_name)) {
869 error_setg(errp, "node-name=%s is conflicting with a device id",
870 node_name);
871 return;
874 /* takes care of avoiding duplicates node names */
875 if (bdrv_find_node(node_name)) {
876 error_setg(errp, "Duplicate node name");
877 return;
880 /* copy node name into the bs and insert it into the graph list */
881 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
882 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
886 * Common part for opening disk images and files
888 * Removes all processed options from *options.
890 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
891 QDict *options, int flags, BlockDriver *drv, Error **errp)
893 int ret, open_flags;
894 const char *filename;
895 const char *node_name = NULL;
896 Error *local_err = NULL;
898 assert(drv != NULL);
899 assert(bs->file == NULL);
900 assert(options != NULL && bs->options != options);
902 if (file != NULL) {
903 filename = file->filename;
904 } else {
905 filename = qdict_get_try_str(options, "filename");
908 if (drv->bdrv_needs_filename && !filename) {
909 error_setg(errp, "The '%s' block driver requires a file name",
910 drv->format_name);
911 return -EINVAL;
914 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
916 node_name = qdict_get_try_str(options, "node-name");
917 bdrv_assign_node_name(bs, node_name, &local_err);
918 if (local_err) {
919 error_propagate(errp, local_err);
920 return -EINVAL;
922 qdict_del(options, "node-name");
924 /* bdrv_open() with directly using a protocol as drv. This layer is already
925 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
926 * and return immediately. */
927 if (file != NULL && drv->bdrv_file_open) {
928 bdrv_swap(file, bs);
929 return 0;
932 bs->open_flags = flags;
933 bs->guest_block_size = 512;
934 bs->request_alignment = 512;
935 bs->zero_beyond_eof = true;
936 open_flags = bdrv_open_flags(bs, flags);
937 bs->read_only = !(open_flags & BDRV_O_RDWR);
938 bs->growable = !!(flags & BDRV_O_PROTOCOL);
940 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
941 error_setg(errp,
942 !bs->read_only && bdrv_is_whitelisted(drv, true)
943 ? "Driver '%s' can only be used for read-only devices"
944 : "Driver '%s' is not whitelisted",
945 drv->format_name);
946 return -ENOTSUP;
949 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
950 if (flags & BDRV_O_COPY_ON_READ) {
951 if (!bs->read_only) {
952 bdrv_enable_copy_on_read(bs);
953 } else {
954 error_setg(errp, "Can't use copy-on-read on read-only device");
955 return -EINVAL;
959 if (filename != NULL) {
960 pstrcpy(bs->filename, sizeof(bs->filename), filename);
961 } else {
962 bs->filename[0] = '\0';
965 bs->drv = drv;
966 bs->opaque = g_malloc0(drv->instance_size);
968 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
970 /* Open the image, either directly or using a protocol */
971 if (drv->bdrv_file_open) {
972 assert(file == NULL);
973 assert(!drv->bdrv_needs_filename || filename != NULL);
974 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
975 } else {
976 if (file == NULL) {
977 error_setg(errp, "Can't use '%s' as a block driver for the "
978 "protocol level", drv->format_name);
979 ret = -EINVAL;
980 goto free_and_fail;
982 bs->file = file;
983 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
986 if (ret < 0) {
987 if (local_err) {
988 error_propagate(errp, local_err);
989 } else if (bs->filename[0]) {
990 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
991 } else {
992 error_setg_errno(errp, -ret, "Could not open image");
994 goto free_and_fail;
997 ret = refresh_total_sectors(bs, bs->total_sectors);
998 if (ret < 0) {
999 error_setg_errno(errp, -ret, "Could not refresh total sector count");
1000 goto free_and_fail;
1003 bdrv_refresh_limits(bs, &local_err);
1004 if (local_err) {
1005 error_propagate(errp, local_err);
1006 ret = -EINVAL;
1007 goto free_and_fail;
1010 assert(bdrv_opt_mem_align(bs) != 0);
1011 assert((bs->request_alignment != 0) || bs->sg);
1012 return 0;
1014 free_and_fail:
1015 bs->file = NULL;
1016 g_free(bs->opaque);
1017 bs->opaque = NULL;
1018 bs->drv = NULL;
1019 return ret;
1022 static QDict *parse_json_filename(const char *filename, Error **errp)
1024 QObject *options_obj;
1025 QDict *options;
1026 int ret;
1028 ret = strstart(filename, "json:", &filename);
1029 assert(ret);
1031 options_obj = qobject_from_json(filename);
1032 if (!options_obj) {
1033 error_setg(errp, "Could not parse the JSON options");
1034 return NULL;
1037 if (qobject_type(options_obj) != QTYPE_QDICT) {
1038 qobject_decref(options_obj);
1039 error_setg(errp, "Invalid JSON object given");
1040 return NULL;
1043 options = qobject_to_qdict(options_obj);
1044 qdict_flatten(options);
1046 return options;
1050 * Fills in default options for opening images and converts the legacy
1051 * filename/flags pair to option QDict entries.
1053 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1054 BlockDriver *drv, Error **errp)
1056 const char *filename = *pfilename;
1057 const char *drvname;
1058 bool protocol = flags & BDRV_O_PROTOCOL;
1059 bool parse_filename = false;
1060 Error *local_err = NULL;
1062 /* Parse json: pseudo-protocol */
1063 if (filename && g_str_has_prefix(filename, "json:")) {
1064 QDict *json_options = parse_json_filename(filename, &local_err);
1065 if (local_err) {
1066 error_propagate(errp, local_err);
1067 return -EINVAL;
1070 /* Options given in the filename have lower priority than options
1071 * specified directly */
1072 qdict_join(*options, json_options, false);
1073 QDECREF(json_options);
1074 *pfilename = filename = NULL;
1077 /* Fetch the file name from the options QDict if necessary */
1078 if (protocol && filename) {
1079 if (!qdict_haskey(*options, "filename")) {
1080 qdict_put(*options, "filename", qstring_from_str(filename));
1081 parse_filename = true;
1082 } else {
1083 error_setg(errp, "Can't specify 'file' and 'filename' options at "
1084 "the same time");
1085 return -EINVAL;
1089 /* Find the right block driver */
1090 filename = qdict_get_try_str(*options, "filename");
1091 drvname = qdict_get_try_str(*options, "driver");
1093 if (drv) {
1094 if (drvname) {
1095 error_setg(errp, "Driver specified twice");
1096 return -EINVAL;
1098 drvname = drv->format_name;
1099 qdict_put(*options, "driver", qstring_from_str(drvname));
1100 } else {
1101 if (!drvname && protocol) {
1102 if (filename) {
1103 drv = bdrv_find_protocol(filename, parse_filename);
1104 if (!drv) {
1105 error_setg(errp, "Unknown protocol");
1106 return -EINVAL;
1109 drvname = drv->format_name;
1110 qdict_put(*options, "driver", qstring_from_str(drvname));
1111 } else {
1112 error_setg(errp, "Must specify either driver or file");
1113 return -EINVAL;
1115 } else if (drvname) {
1116 drv = bdrv_find_format(drvname);
1117 if (!drv) {
1118 error_setg(errp, "Unknown driver '%s'", drvname);
1119 return -ENOENT;
1124 assert(drv || !protocol);
1126 /* Driver-specific filename parsing */
1127 if (drv && drv->bdrv_parse_filename && parse_filename) {
1128 drv->bdrv_parse_filename(filename, *options, &local_err);
1129 if (local_err) {
1130 error_propagate(errp, local_err);
1131 return -EINVAL;
1134 if (!drv->bdrv_needs_filename) {
1135 qdict_del(*options, "filename");
1139 return 0;
1142 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1145 if (bs->backing_hd) {
1146 assert(bs->backing_blocker);
1147 bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1148 } else if (backing_hd) {
1149 error_setg(&bs->backing_blocker,
1150 "device is used as backing hd of '%s'",
1151 bs->device_name);
1154 bs->backing_hd = backing_hd;
1155 if (!backing_hd) {
1156 error_free(bs->backing_blocker);
1157 bs->backing_blocker = NULL;
1158 goto out;
1160 bs->open_flags &= ~BDRV_O_NO_BACKING;
1161 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1162 pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1163 backing_hd->drv ? backing_hd->drv->format_name : "");
1165 bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1166 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1167 bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1168 bs->backing_blocker);
1169 out:
1170 bdrv_refresh_limits(bs, NULL);
1174 * Opens the backing file for a BlockDriverState if not yet open
1176 * options is a QDict of options to pass to the block drivers, or NULL for an
1177 * empty set of options. The reference to the QDict is transferred to this
1178 * function (even on failure), so if the caller intends to reuse the dictionary,
1179 * it needs to use QINCREF() before calling bdrv_file_open.
1181 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1183 char *backing_filename = g_malloc0(PATH_MAX);
1184 int ret = 0;
1185 BlockDriver *back_drv = NULL;
1186 BlockDriverState *backing_hd;
1187 Error *local_err = NULL;
1189 if (bs->backing_hd != NULL) {
1190 QDECREF(options);
1191 goto free_exit;
1194 /* NULL means an empty set of options */
1195 if (options == NULL) {
1196 options = qdict_new();
1199 bs->open_flags &= ~BDRV_O_NO_BACKING;
1200 if (qdict_haskey(options, "file.filename")) {
1201 backing_filename[0] = '\0';
1202 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1203 QDECREF(options);
1204 goto free_exit;
1205 } else {
1206 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1209 if (!bs->drv || !bs->drv->supports_backing) {
1210 ret = -EINVAL;
1211 error_setg(errp, "Driver doesn't support backing files");
1212 QDECREF(options);
1213 goto free_exit;
1216 backing_hd = bdrv_new("", errp);
1218 if (bs->backing_format[0] != '\0') {
1219 back_drv = bdrv_find_format(bs->backing_format);
1222 assert(bs->backing_hd == NULL);
1223 ret = bdrv_open(&backing_hd,
1224 *backing_filename ? backing_filename : NULL, NULL, options,
1225 bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1226 if (ret < 0) {
1227 bdrv_unref(backing_hd);
1228 backing_hd = NULL;
1229 bs->open_flags |= BDRV_O_NO_BACKING;
1230 error_setg(errp, "Could not open backing file: %s",
1231 error_get_pretty(local_err));
1232 error_free(local_err);
1233 goto free_exit;
1235 bdrv_set_backing_hd(bs, backing_hd);
1237 free_exit:
1238 g_free(backing_filename);
1239 return ret;
1243 * Opens a disk image whose options are given as BlockdevRef in another block
1244 * device's options.
1246 * If allow_none is true, no image will be opened if filename is false and no
1247 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1249 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1250 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1251 * itself, all options starting with "${bdref_key}." are considered part of the
1252 * BlockdevRef.
1254 * The BlockdevRef will be removed from the options QDict.
1256 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1258 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1259 QDict *options, const char *bdref_key, int flags,
1260 bool allow_none, Error **errp)
1262 QDict *image_options;
1263 int ret;
1264 char *bdref_key_dot;
1265 const char *reference;
1267 assert(pbs);
1268 assert(*pbs == NULL);
1270 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1271 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1272 g_free(bdref_key_dot);
1274 reference = qdict_get_try_str(options, bdref_key);
1275 if (!filename && !reference && !qdict_size(image_options)) {
1276 if (allow_none) {
1277 ret = 0;
1278 } else {
1279 error_setg(errp, "A block device must be specified for \"%s\"",
1280 bdref_key);
1281 ret = -EINVAL;
1283 QDECREF(image_options);
1284 goto done;
1287 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1289 done:
1290 qdict_del(options, bdref_key);
1291 return ret;
1294 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1296 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1297 char *tmp_filename = g_malloc0(PATH_MAX + 1);
1298 int64_t total_size;
1299 BlockDriver *bdrv_qcow2;
1300 QemuOpts *opts = NULL;
1301 QDict *snapshot_options;
1302 BlockDriverState *bs_snapshot;
1303 Error *local_err;
1304 int ret;
1306 /* if snapshot, we create a temporary backing file and open it
1307 instead of opening 'filename' directly */
1309 /* Get the required size from the image */
1310 total_size = bdrv_getlength(bs);
1311 if (total_size < 0) {
1312 ret = total_size;
1313 error_setg_errno(errp, -total_size, "Could not get image size");
1314 goto out;
1316 total_size &= BDRV_SECTOR_MASK;
1318 /* Create the temporary image */
1319 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1320 if (ret < 0) {
1321 error_setg_errno(errp, -ret, "Could not get temporary filename");
1322 goto out;
1325 bdrv_qcow2 = bdrv_find_format("qcow2");
1326 opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1327 &error_abort);
1328 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1329 ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1330 qemu_opts_del(opts);
1331 if (ret < 0) {
1332 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1333 "'%s': %s", tmp_filename,
1334 error_get_pretty(local_err));
1335 error_free(local_err);
1336 goto out;
1339 /* Prepare a new options QDict for the temporary file */
1340 snapshot_options = qdict_new();
1341 qdict_put(snapshot_options, "file.driver",
1342 qstring_from_str("file"));
1343 qdict_put(snapshot_options, "file.filename",
1344 qstring_from_str(tmp_filename));
1346 bs_snapshot = bdrv_new("", &error_abort);
1348 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1349 flags, bdrv_qcow2, &local_err);
1350 if (ret < 0) {
1351 error_propagate(errp, local_err);
1352 goto out;
1355 bdrv_append(bs_snapshot, bs);
1357 out:
1358 g_free(tmp_filename);
1359 return ret;
1363 * Opens a disk image (raw, qcow2, vmdk, ...)
1365 * options is a QDict of options to pass to the block drivers, or NULL for an
1366 * empty set of options. The reference to the QDict belongs to the block layer
1367 * after the call (even on failure), so if the caller intends to reuse the
1368 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1370 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1371 * If it is not NULL, the referenced BDS will be reused.
1373 * The reference parameter may be used to specify an existing block device which
1374 * should be opened. If specified, neither options nor a filename may be given,
1375 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1377 int bdrv_open(BlockDriverState **pbs, const char *filename,
1378 const char *reference, QDict *options, int flags,
1379 BlockDriver *drv, Error **errp)
1381 int ret;
1382 BlockDriverState *file = NULL, *bs;
1383 const char *drvname;
1384 Error *local_err = NULL;
1385 int snapshot_flags = 0;
1387 assert(pbs);
1389 if (reference) {
1390 bool options_non_empty = options ? qdict_size(options) : false;
1391 QDECREF(options);
1393 if (*pbs) {
1394 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1395 "another block device");
1396 return -EINVAL;
1399 if (filename || options_non_empty) {
1400 error_setg(errp, "Cannot reference an existing block device with "
1401 "additional options or a new filename");
1402 return -EINVAL;
1405 bs = bdrv_lookup_bs(reference, reference, errp);
1406 if (!bs) {
1407 return -ENODEV;
1409 bdrv_ref(bs);
1410 *pbs = bs;
1411 return 0;
1414 if (*pbs) {
1415 bs = *pbs;
1416 } else {
1417 bs = bdrv_new("", &error_abort);
1420 /* NULL means an empty set of options */
1421 if (options == NULL) {
1422 options = qdict_new();
1425 ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1426 if (local_err) {
1427 goto fail;
1430 /* Find the right image format driver */
1431 drv = NULL;
1432 drvname = qdict_get_try_str(options, "driver");
1433 if (drvname) {
1434 drv = bdrv_find_format(drvname);
1435 qdict_del(options, "driver");
1436 if (!drv) {
1437 error_setg(errp, "Unknown driver: '%s'", drvname);
1438 ret = -EINVAL;
1439 goto fail;
1443 assert(drvname || !(flags & BDRV_O_PROTOCOL));
1444 if (drv && !drv->bdrv_file_open) {
1445 /* If the user explicitly wants a format driver here, we'll need to add
1446 * another layer for the protocol in bs->file */
1447 flags &= ~BDRV_O_PROTOCOL;
1450 bs->options = options;
1451 options = qdict_clone_shallow(options);
1453 /* Open image file without format layer */
1454 if ((flags & BDRV_O_PROTOCOL) == 0) {
1455 if (flags & BDRV_O_RDWR) {
1456 flags |= BDRV_O_ALLOW_RDWR;
1458 if (flags & BDRV_O_SNAPSHOT) {
1459 snapshot_flags = bdrv_temp_snapshot_flags(flags);
1460 flags = bdrv_backing_flags(flags);
1463 assert(file == NULL);
1464 ret = bdrv_open_image(&file, filename, options, "file",
1465 bdrv_inherited_flags(flags),
1466 true, &local_err);
1467 if (ret < 0) {
1468 goto fail;
1472 /* Image format probing */
1473 if (!drv && file) {
1474 ret = find_image_format(file, filename, &drv, &local_err);
1475 if (ret < 0) {
1476 goto fail;
1478 } else if (!drv) {
1479 error_setg(errp, "Must specify either driver or file");
1480 ret = -EINVAL;
1481 goto fail;
1484 /* Open the image */
1485 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1486 if (ret < 0) {
1487 goto fail;
1490 if (file && (bs->file != file)) {
1491 bdrv_unref(file);
1492 file = NULL;
1495 /* If there is a backing file, use it */
1496 if ((flags & BDRV_O_NO_BACKING) == 0) {
1497 QDict *backing_options;
1499 qdict_extract_subqdict(options, &backing_options, "backing.");
1500 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1501 if (ret < 0) {
1502 goto close_and_fail;
1506 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1507 * temporary snapshot afterwards. */
1508 if (snapshot_flags) {
1509 ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1510 if (local_err) {
1511 goto close_and_fail;
1515 /* Check if any unknown options were used */
1516 if (options && (qdict_size(options) != 0)) {
1517 const QDictEntry *entry = qdict_first(options);
1518 if (flags & BDRV_O_PROTOCOL) {
1519 error_setg(errp, "Block protocol '%s' doesn't support the option "
1520 "'%s'", drv->format_name, entry->key);
1521 } else {
1522 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1523 "support the option '%s'", drv->format_name,
1524 bs->device_name, entry->key);
1527 ret = -EINVAL;
1528 goto close_and_fail;
1531 if (!bdrv_key_required(bs)) {
1532 bdrv_dev_change_media_cb(bs, true);
1533 } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1534 && !runstate_check(RUN_STATE_INMIGRATE)
1535 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1536 error_setg(errp,
1537 "Guest must be stopped for opening of encrypted image");
1538 ret = -EBUSY;
1539 goto close_and_fail;
1542 QDECREF(options);
1543 *pbs = bs;
1544 return 0;
1546 fail:
1547 if (file != NULL) {
1548 bdrv_unref(file);
1550 QDECREF(bs->options);
1551 QDECREF(options);
1552 bs->options = NULL;
1553 if (!*pbs) {
1554 /* If *pbs is NULL, a new BDS has been created in this function and
1555 needs to be freed now. Otherwise, it does not need to be closed,
1556 since it has not really been opened yet. */
1557 bdrv_unref(bs);
1559 if (local_err) {
1560 error_propagate(errp, local_err);
1562 return ret;
1564 close_and_fail:
1565 /* See fail path, but now the BDS has to be always closed */
1566 if (*pbs) {
1567 bdrv_close(bs);
1568 } else {
1569 bdrv_unref(bs);
1571 QDECREF(options);
1572 if (local_err) {
1573 error_propagate(errp, local_err);
1575 return ret;
1578 typedef struct BlockReopenQueueEntry {
1579 bool prepared;
1580 BDRVReopenState state;
1581 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1582 } BlockReopenQueueEntry;
1585 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1586 * reopen of multiple devices.
1588 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1589 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1590 * be created and initialized. This newly created BlockReopenQueue should be
1591 * passed back in for subsequent calls that are intended to be of the same
1592 * atomic 'set'.
1594 * bs is the BlockDriverState to add to the reopen queue.
1596 * flags contains the open flags for the associated bs
1598 * returns a pointer to bs_queue, which is either the newly allocated
1599 * bs_queue, or the existing bs_queue being used.
1602 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1603 BlockDriverState *bs, int flags)
1605 assert(bs != NULL);
1607 BlockReopenQueueEntry *bs_entry;
1608 if (bs_queue == NULL) {
1609 bs_queue = g_new0(BlockReopenQueue, 1);
1610 QSIMPLEQ_INIT(bs_queue);
1613 /* bdrv_open() masks this flag out */
1614 flags &= ~BDRV_O_PROTOCOL;
1616 if (bs->file) {
1617 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1620 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1621 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1623 bs_entry->state.bs = bs;
1624 bs_entry->state.flags = flags;
1626 return bs_queue;
1630 * Reopen multiple BlockDriverStates atomically & transactionally.
1632 * The queue passed in (bs_queue) must have been built up previous
1633 * via bdrv_reopen_queue().
1635 * Reopens all BDS specified in the queue, with the appropriate
1636 * flags. All devices are prepared for reopen, and failure of any
1637 * device will cause all device changes to be abandonded, and intermediate
1638 * data cleaned up.
1640 * If all devices prepare successfully, then the changes are committed
1641 * to all devices.
1644 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1646 int ret = -1;
1647 BlockReopenQueueEntry *bs_entry, *next;
1648 Error *local_err = NULL;
1650 assert(bs_queue != NULL);
1652 bdrv_drain_all();
1654 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1655 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1656 error_propagate(errp, local_err);
1657 goto cleanup;
1659 bs_entry->prepared = true;
1662 /* If we reach this point, we have success and just need to apply the
1663 * changes
1665 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1666 bdrv_reopen_commit(&bs_entry->state);
1669 ret = 0;
1671 cleanup:
1672 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1673 if (ret && bs_entry->prepared) {
1674 bdrv_reopen_abort(&bs_entry->state);
1676 g_free(bs_entry);
1678 g_free(bs_queue);
1679 return ret;
1683 /* Reopen a single BlockDriverState with the specified flags. */
1684 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1686 int ret = -1;
1687 Error *local_err = NULL;
1688 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1690 ret = bdrv_reopen_multiple(queue, &local_err);
1691 if (local_err != NULL) {
1692 error_propagate(errp, local_err);
1694 return ret;
1699 * Prepares a BlockDriverState for reopen. All changes are staged in the
1700 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1701 * the block driver layer .bdrv_reopen_prepare()
1703 * bs is the BlockDriverState to reopen
1704 * flags are the new open flags
1705 * queue is the reopen queue
1707 * Returns 0 on success, non-zero on error. On error errp will be set
1708 * as well.
1710 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1711 * It is the responsibility of the caller to then call the abort() or
1712 * commit() for any other BDS that have been left in a prepare() state
1715 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1716 Error **errp)
1718 int ret = -1;
1719 Error *local_err = NULL;
1720 BlockDriver *drv;
1722 assert(reopen_state != NULL);
1723 assert(reopen_state->bs->drv != NULL);
1724 drv = reopen_state->bs->drv;
1726 /* if we are to stay read-only, do not allow permission change
1727 * to r/w */
1728 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1729 reopen_state->flags & BDRV_O_RDWR) {
1730 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1731 reopen_state->bs->device_name);
1732 goto error;
1736 ret = bdrv_flush(reopen_state->bs);
1737 if (ret) {
1738 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1739 strerror(-ret));
1740 goto error;
1743 if (drv->bdrv_reopen_prepare) {
1744 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1745 if (ret) {
1746 if (local_err != NULL) {
1747 error_propagate(errp, local_err);
1748 } else {
1749 error_setg(errp, "failed while preparing to reopen image '%s'",
1750 reopen_state->bs->filename);
1752 goto error;
1754 } else {
1755 /* It is currently mandatory to have a bdrv_reopen_prepare()
1756 * handler for each supported drv. */
1757 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1758 drv->format_name, reopen_state->bs->device_name,
1759 "reopening of file");
1760 ret = -1;
1761 goto error;
1764 ret = 0;
1766 error:
1767 return ret;
1771 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1772 * makes them final by swapping the staging BlockDriverState contents into
1773 * the active BlockDriverState contents.
1775 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1777 BlockDriver *drv;
1779 assert(reopen_state != NULL);
1780 drv = reopen_state->bs->drv;
1781 assert(drv != NULL);
1783 /* If there are any driver level actions to take */
1784 if (drv->bdrv_reopen_commit) {
1785 drv->bdrv_reopen_commit(reopen_state);
1788 /* set BDS specific flags now */
1789 reopen_state->bs->open_flags = reopen_state->flags;
1790 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1791 BDRV_O_CACHE_WB);
1792 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1794 bdrv_refresh_limits(reopen_state->bs, NULL);
1798 * Abort the reopen, and delete and free the staged changes in
1799 * reopen_state
1801 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1803 BlockDriver *drv;
1805 assert(reopen_state != NULL);
1806 drv = reopen_state->bs->drv;
1807 assert(drv != NULL);
1809 if (drv->bdrv_reopen_abort) {
1810 drv->bdrv_reopen_abort(reopen_state);
1815 void bdrv_close(BlockDriverState *bs)
1817 if (bs->job) {
1818 block_job_cancel_sync(bs->job);
1820 bdrv_drain_all(); /* complete I/O */
1821 bdrv_flush(bs);
1822 bdrv_drain_all(); /* in case flush left pending I/O */
1823 notifier_list_notify(&bs->close_notifiers, bs);
1825 if (bs->drv) {
1826 if (bs->backing_hd) {
1827 BlockDriverState *backing_hd = bs->backing_hd;
1828 bdrv_set_backing_hd(bs, NULL);
1829 bdrv_unref(backing_hd);
1831 bs->drv->bdrv_close(bs);
1832 g_free(bs->opaque);
1833 bs->opaque = NULL;
1834 bs->drv = NULL;
1835 bs->copy_on_read = 0;
1836 bs->backing_file[0] = '\0';
1837 bs->backing_format[0] = '\0';
1838 bs->total_sectors = 0;
1839 bs->encrypted = 0;
1840 bs->valid_key = 0;
1841 bs->sg = 0;
1842 bs->growable = 0;
1843 bs->zero_beyond_eof = false;
1844 QDECREF(bs->options);
1845 bs->options = NULL;
1847 if (bs->file != NULL) {
1848 bdrv_unref(bs->file);
1849 bs->file = NULL;
1853 bdrv_dev_change_media_cb(bs, false);
1855 /*throttling disk I/O limits*/
1856 if (bs->io_limits_enabled) {
1857 bdrv_io_limits_disable(bs);
1861 void bdrv_close_all(void)
1863 BlockDriverState *bs;
1865 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1866 AioContext *aio_context = bdrv_get_aio_context(bs);
1868 aio_context_acquire(aio_context);
1869 bdrv_close(bs);
1870 aio_context_release(aio_context);
1874 /* Check if any requests are in-flight (including throttled requests) */
1875 static bool bdrv_requests_pending(BlockDriverState *bs)
1877 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1878 return true;
1880 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1881 return true;
1883 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1884 return true;
1886 if (bs->file && bdrv_requests_pending(bs->file)) {
1887 return true;
1889 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1890 return true;
1892 return false;
1896 * Wait for pending requests to complete across all BlockDriverStates
1898 * This function does not flush data to disk, use bdrv_flush_all() for that
1899 * after calling this function.
1901 * Note that completion of an asynchronous I/O operation can trigger any
1902 * number of other I/O operations on other devices---for example a coroutine
1903 * can be arbitrarily complex and a constant flow of I/O can come until the
1904 * coroutine is complete. Because of this, it is not possible to have a
1905 * function to drain a single device's I/O queue.
1907 void bdrv_drain_all(void)
1909 /* Always run first iteration so any pending completion BHs run */
1910 bool busy = true;
1911 BlockDriverState *bs;
1913 while (busy) {
1914 busy = false;
1916 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1917 AioContext *aio_context = bdrv_get_aio_context(bs);
1918 bool bs_busy;
1920 aio_context_acquire(aio_context);
1921 bdrv_flush_io_queue(bs);
1922 bdrv_start_throttled_reqs(bs);
1923 bs_busy = bdrv_requests_pending(bs);
1924 bs_busy |= aio_poll(aio_context, bs_busy);
1925 aio_context_release(aio_context);
1927 busy |= bs_busy;
1932 /* make a BlockDriverState anonymous by removing from bdrv_state and
1933 * graph_bdrv_state list.
1934 Also, NULL terminate the device_name to prevent double remove */
1935 void bdrv_make_anon(BlockDriverState *bs)
1937 if (bs->device_name[0] != '\0') {
1938 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1940 bs->device_name[0] = '\0';
1941 if (bs->node_name[0] != '\0') {
1942 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1944 bs->node_name[0] = '\0';
1947 static void bdrv_rebind(BlockDriverState *bs)
1949 if (bs->drv && bs->drv->bdrv_rebind) {
1950 bs->drv->bdrv_rebind(bs);
1954 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1955 BlockDriverState *bs_src)
1957 /* move some fields that need to stay attached to the device */
1959 /* dev info */
1960 bs_dest->dev_ops = bs_src->dev_ops;
1961 bs_dest->dev_opaque = bs_src->dev_opaque;
1962 bs_dest->dev = bs_src->dev;
1963 bs_dest->guest_block_size = bs_src->guest_block_size;
1964 bs_dest->copy_on_read = bs_src->copy_on_read;
1966 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1968 /* i/o throttled req */
1969 memcpy(&bs_dest->throttle_state,
1970 &bs_src->throttle_state,
1971 sizeof(ThrottleState));
1972 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1973 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1974 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1976 /* r/w error */
1977 bs_dest->on_read_error = bs_src->on_read_error;
1978 bs_dest->on_write_error = bs_src->on_write_error;
1980 /* i/o status */
1981 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1982 bs_dest->iostatus = bs_src->iostatus;
1984 /* dirty bitmap */
1985 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1987 /* reference count */
1988 bs_dest->refcnt = bs_src->refcnt;
1990 /* job */
1991 bs_dest->job = bs_src->job;
1993 /* keep the same entry in bdrv_states */
1994 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1995 bs_src->device_name);
1996 bs_dest->device_list = bs_src->device_list;
1997 memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1998 sizeof(bs_dest->op_blockers));
2002 * Swap bs contents for two image chains while they are live,
2003 * while keeping required fields on the BlockDriverState that is
2004 * actually attached to a device.
2006 * This will modify the BlockDriverState fields, and swap contents
2007 * between bs_new and bs_old. Both bs_new and bs_old are modified.
2009 * bs_new is required to be anonymous.
2011 * This function does not create any image files.
2013 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2015 BlockDriverState tmp;
2017 /* The code needs to swap the node_name but simply swapping node_list won't
2018 * work so first remove the nodes from the graph list, do the swap then
2019 * insert them back if needed.
2021 if (bs_new->node_name[0] != '\0') {
2022 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2024 if (bs_old->node_name[0] != '\0') {
2025 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2028 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2029 assert(bs_new->device_name[0] == '\0');
2030 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2031 assert(bs_new->job == NULL);
2032 assert(bs_new->dev == NULL);
2033 assert(bs_new->io_limits_enabled == false);
2034 assert(!throttle_have_timer(&bs_new->throttle_state));
2036 tmp = *bs_new;
2037 *bs_new = *bs_old;
2038 *bs_old = tmp;
2040 /* there are some fields that should not be swapped, move them back */
2041 bdrv_move_feature_fields(&tmp, bs_old);
2042 bdrv_move_feature_fields(bs_old, bs_new);
2043 bdrv_move_feature_fields(bs_new, &tmp);
2045 /* bs_new shouldn't be in bdrv_states even after the swap! */
2046 assert(bs_new->device_name[0] == '\0');
2048 /* Check a few fields that should remain attached to the device */
2049 assert(bs_new->dev == NULL);
2050 assert(bs_new->job == NULL);
2051 assert(bs_new->io_limits_enabled == false);
2052 assert(!throttle_have_timer(&bs_new->throttle_state));
2054 /* insert the nodes back into the graph node list if needed */
2055 if (bs_new->node_name[0] != '\0') {
2056 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2058 if (bs_old->node_name[0] != '\0') {
2059 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2062 bdrv_rebind(bs_new);
2063 bdrv_rebind(bs_old);
2067 * Add new bs contents at the top of an image chain while the chain is
2068 * live, while keeping required fields on the top layer.
2070 * This will modify the BlockDriverState fields, and swap contents
2071 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2073 * bs_new is required to be anonymous.
2075 * This function does not create any image files.
2077 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2079 bdrv_swap(bs_new, bs_top);
2081 /* The contents of 'tmp' will become bs_top, as we are
2082 * swapping bs_new and bs_top contents. */
2083 bdrv_set_backing_hd(bs_top, bs_new);
2086 static void bdrv_delete(BlockDriverState *bs)
2088 assert(!bs->dev);
2089 assert(!bs->job);
2090 assert(bdrv_op_blocker_is_empty(bs));
2091 assert(!bs->refcnt);
2092 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2094 bdrv_close(bs);
2096 /* remove from list, if necessary */
2097 bdrv_make_anon(bs);
2099 g_free(bs);
2102 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2103 /* TODO change to DeviceState *dev when all users are qdevified */
2105 if (bs->dev) {
2106 return -EBUSY;
2108 bs->dev = dev;
2109 bdrv_iostatus_reset(bs);
2110 return 0;
2113 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2114 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2116 if (bdrv_attach_dev(bs, dev) < 0) {
2117 abort();
2121 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2122 /* TODO change to DeviceState *dev when all users are qdevified */
2124 assert(bs->dev == dev);
2125 bs->dev = NULL;
2126 bs->dev_ops = NULL;
2127 bs->dev_opaque = NULL;
2128 bs->guest_block_size = 512;
2131 /* TODO change to return DeviceState * when all users are qdevified */
2132 void *bdrv_get_attached_dev(BlockDriverState *bs)
2134 return bs->dev;
2137 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2138 void *opaque)
2140 bs->dev_ops = ops;
2141 bs->dev_opaque = opaque;
2144 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2146 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2147 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2148 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2149 if (tray_was_closed) {
2150 /* tray open */
2151 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2152 true, &error_abort);
2154 if (load) {
2155 /* tray close */
2156 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2157 false, &error_abort);
2162 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2164 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2167 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2169 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2170 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2174 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2176 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2177 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2179 return false;
2182 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2184 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2185 bs->dev_ops->resize_cb(bs->dev_opaque);
2189 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2191 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2192 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2194 return false;
2198 * Run consistency checks on an image
2200 * Returns 0 if the check could be completed (it doesn't mean that the image is
2201 * free of errors) or -errno when an internal error occurred. The results of the
2202 * check are stored in res.
2204 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2206 if (bs->drv->bdrv_check == NULL) {
2207 return -ENOTSUP;
2210 memset(res, 0, sizeof(*res));
2211 return bs->drv->bdrv_check(bs, res, fix);
2214 #define COMMIT_BUF_SECTORS 2048
2216 /* commit COW file into the raw image */
2217 int bdrv_commit(BlockDriverState *bs)
2219 BlockDriver *drv = bs->drv;
2220 int64_t sector, total_sectors, length, backing_length;
2221 int n, ro, open_flags;
2222 int ret = 0;
2223 uint8_t *buf = NULL;
2224 char filename[PATH_MAX];
2226 if (!drv)
2227 return -ENOMEDIUM;
2229 if (!bs->backing_hd) {
2230 return -ENOTSUP;
2233 if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2234 bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2235 return -EBUSY;
2238 ro = bs->backing_hd->read_only;
2239 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2240 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2241 open_flags = bs->backing_hd->open_flags;
2243 if (ro) {
2244 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2245 return -EACCES;
2249 length = bdrv_getlength(bs);
2250 if (length < 0) {
2251 ret = length;
2252 goto ro_cleanup;
2255 backing_length = bdrv_getlength(bs->backing_hd);
2256 if (backing_length < 0) {
2257 ret = backing_length;
2258 goto ro_cleanup;
2261 /* If our top snapshot is larger than the backing file image,
2262 * grow the backing file image if possible. If not possible,
2263 * we must return an error */
2264 if (length > backing_length) {
2265 ret = bdrv_truncate(bs->backing_hd, length);
2266 if (ret < 0) {
2267 goto ro_cleanup;
2271 total_sectors = length >> BDRV_SECTOR_BITS;
2272 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2274 for (sector = 0; sector < total_sectors; sector += n) {
2275 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2276 if (ret < 0) {
2277 goto ro_cleanup;
2279 if (ret) {
2280 ret = bdrv_read(bs, sector, buf, n);
2281 if (ret < 0) {
2282 goto ro_cleanup;
2285 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2286 if (ret < 0) {
2287 goto ro_cleanup;
2292 if (drv->bdrv_make_empty) {
2293 ret = drv->bdrv_make_empty(bs);
2294 if (ret < 0) {
2295 goto ro_cleanup;
2297 bdrv_flush(bs);
2301 * Make sure all data we wrote to the backing device is actually
2302 * stable on disk.
2304 if (bs->backing_hd) {
2305 bdrv_flush(bs->backing_hd);
2308 ret = 0;
2309 ro_cleanup:
2310 g_free(buf);
2312 if (ro) {
2313 /* ignoring error return here */
2314 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2317 return ret;
2320 int bdrv_commit_all(void)
2322 BlockDriverState *bs;
2324 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2325 AioContext *aio_context = bdrv_get_aio_context(bs);
2327 aio_context_acquire(aio_context);
2328 if (bs->drv && bs->backing_hd) {
2329 int ret = bdrv_commit(bs);
2330 if (ret < 0) {
2331 aio_context_release(aio_context);
2332 return ret;
2335 aio_context_release(aio_context);
2337 return 0;
2341 * Remove an active request from the tracked requests list
2343 * This function should be called when a tracked request is completing.
2345 static void tracked_request_end(BdrvTrackedRequest *req)
2347 if (req->serialising) {
2348 req->bs->serialising_in_flight--;
2351 QLIST_REMOVE(req, list);
2352 qemu_co_queue_restart_all(&req->wait_queue);
2356 * Add an active request to the tracked requests list
2358 static void tracked_request_begin(BdrvTrackedRequest *req,
2359 BlockDriverState *bs,
2360 int64_t offset,
2361 unsigned int bytes, bool is_write)
2363 *req = (BdrvTrackedRequest){
2364 .bs = bs,
2365 .offset = offset,
2366 .bytes = bytes,
2367 .is_write = is_write,
2368 .co = qemu_coroutine_self(),
2369 .serialising = false,
2370 .overlap_offset = offset,
2371 .overlap_bytes = bytes,
2374 qemu_co_queue_init(&req->wait_queue);
2376 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2379 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2381 int64_t overlap_offset = req->offset & ~(align - 1);
2382 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2383 - overlap_offset;
2385 if (!req->serialising) {
2386 req->bs->serialising_in_flight++;
2387 req->serialising = true;
2390 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2391 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2395 * Round a region to cluster boundaries
2397 void bdrv_round_to_clusters(BlockDriverState *bs,
2398 int64_t sector_num, int nb_sectors,
2399 int64_t *cluster_sector_num,
2400 int *cluster_nb_sectors)
2402 BlockDriverInfo bdi;
2404 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2405 *cluster_sector_num = sector_num;
2406 *cluster_nb_sectors = nb_sectors;
2407 } else {
2408 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2409 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2410 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2411 nb_sectors, c);
2415 static int bdrv_get_cluster_size(BlockDriverState *bs)
2417 BlockDriverInfo bdi;
2418 int ret;
2420 ret = bdrv_get_info(bs, &bdi);
2421 if (ret < 0 || bdi.cluster_size == 0) {
2422 return bs->request_alignment;
2423 } else {
2424 return bdi.cluster_size;
2428 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2429 int64_t offset, unsigned int bytes)
2431 /* aaaa bbbb */
2432 if (offset >= req->overlap_offset + req->overlap_bytes) {
2433 return false;
2435 /* bbbb aaaa */
2436 if (req->overlap_offset >= offset + bytes) {
2437 return false;
2439 return true;
2442 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2444 BlockDriverState *bs = self->bs;
2445 BdrvTrackedRequest *req;
2446 bool retry;
2447 bool waited = false;
2449 if (!bs->serialising_in_flight) {
2450 return false;
2453 do {
2454 retry = false;
2455 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2456 if (req == self || (!req->serialising && !self->serialising)) {
2457 continue;
2459 if (tracked_request_overlaps(req, self->overlap_offset,
2460 self->overlap_bytes))
2462 /* Hitting this means there was a reentrant request, for
2463 * example, a block driver issuing nested requests. This must
2464 * never happen since it means deadlock.
2466 assert(qemu_coroutine_self() != req->co);
2468 /* If the request is already (indirectly) waiting for us, or
2469 * will wait for us as soon as it wakes up, then just go on
2470 * (instead of producing a deadlock in the former case). */
2471 if (!req->waiting_for) {
2472 self->waiting_for = req;
2473 qemu_co_queue_wait(&req->wait_queue);
2474 self->waiting_for = NULL;
2475 retry = true;
2476 waited = true;
2477 break;
2481 } while (retry);
2483 return waited;
2487 * Return values:
2488 * 0 - success
2489 * -EINVAL - backing format specified, but no file
2490 * -ENOSPC - can't update the backing file because no space is left in the
2491 * image file header
2492 * -ENOTSUP - format driver doesn't support changing the backing file
2494 int bdrv_change_backing_file(BlockDriverState *bs,
2495 const char *backing_file, const char *backing_fmt)
2497 BlockDriver *drv = bs->drv;
2498 int ret;
2500 /* Backing file format doesn't make sense without a backing file */
2501 if (backing_fmt && !backing_file) {
2502 return -EINVAL;
2505 if (drv->bdrv_change_backing_file != NULL) {
2506 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2507 } else {
2508 ret = -ENOTSUP;
2511 if (ret == 0) {
2512 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2513 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2515 return ret;
2519 * Finds the image layer in the chain that has 'bs' as its backing file.
2521 * active is the current topmost image.
2523 * Returns NULL if bs is not found in active's image chain,
2524 * or if active == bs.
2526 * Returns the bottommost base image if bs == NULL.
2528 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2529 BlockDriverState *bs)
2531 while (active && bs != active->backing_hd) {
2532 active = active->backing_hd;
2535 return active;
2538 /* Given a BDS, searches for the base layer. */
2539 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
2541 return bdrv_find_overlay(bs, NULL);
2544 typedef struct BlkIntermediateStates {
2545 BlockDriverState *bs;
2546 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2547 } BlkIntermediateStates;
2551 * Drops images above 'base' up to and including 'top', and sets the image
2552 * above 'top' to have base as its backing file.
2554 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2555 * information in 'bs' can be properly updated.
2557 * E.g., this will convert the following chain:
2558 * bottom <- base <- intermediate <- top <- active
2560 * to
2562 * bottom <- base <- active
2564 * It is allowed for bottom==base, in which case it converts:
2566 * base <- intermediate <- top <- active
2568 * to
2570 * base <- active
2572 * If backing_file_str is non-NULL, it will be used when modifying top's
2573 * overlay image metadata.
2575 * Error conditions:
2576 * if active == top, that is considered an error
2579 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2580 BlockDriverState *base, const char *backing_file_str)
2582 BlockDriverState *intermediate;
2583 BlockDriverState *base_bs = NULL;
2584 BlockDriverState *new_top_bs = NULL;
2585 BlkIntermediateStates *intermediate_state, *next;
2586 int ret = -EIO;
2588 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2589 QSIMPLEQ_INIT(&states_to_delete);
2591 if (!top->drv || !base->drv) {
2592 goto exit;
2595 new_top_bs = bdrv_find_overlay(active, top);
2597 if (new_top_bs == NULL) {
2598 /* we could not find the image above 'top', this is an error */
2599 goto exit;
2602 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2603 * to do, no intermediate images */
2604 if (new_top_bs->backing_hd == base) {
2605 ret = 0;
2606 goto exit;
2609 intermediate = top;
2611 /* now we will go down through the list, and add each BDS we find
2612 * into our deletion queue, until we hit the 'base'
2614 while (intermediate) {
2615 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2616 intermediate_state->bs = intermediate;
2617 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2619 if (intermediate->backing_hd == base) {
2620 base_bs = intermediate->backing_hd;
2621 break;
2623 intermediate = intermediate->backing_hd;
2625 if (base_bs == NULL) {
2626 /* something went wrong, we did not end at the base. safely
2627 * unravel everything, and exit with error */
2628 goto exit;
2631 /* success - we can delete the intermediate states, and link top->base */
2632 backing_file_str = backing_file_str ? backing_file_str : base_bs->filename;
2633 ret = bdrv_change_backing_file(new_top_bs, backing_file_str,
2634 base_bs->drv ? base_bs->drv->format_name : "");
2635 if (ret) {
2636 goto exit;
2638 bdrv_set_backing_hd(new_top_bs, base_bs);
2640 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2641 /* so that bdrv_close() does not recursively close the chain */
2642 bdrv_set_backing_hd(intermediate_state->bs, NULL);
2643 bdrv_unref(intermediate_state->bs);
2645 ret = 0;
2647 exit:
2648 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2649 g_free(intermediate_state);
2651 return ret;
2655 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2656 size_t size)
2658 int64_t len;
2660 if (size > INT_MAX) {
2661 return -EIO;
2664 if (!bdrv_is_inserted(bs))
2665 return -ENOMEDIUM;
2667 if (bs->growable)
2668 return 0;
2670 len = bdrv_getlength(bs);
2672 if (offset < 0)
2673 return -EIO;
2675 if ((offset > len) || (len - offset < size))
2676 return -EIO;
2678 return 0;
2681 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2682 int nb_sectors)
2684 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2685 return -EIO;
2688 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2689 nb_sectors * BDRV_SECTOR_SIZE);
2692 typedef struct RwCo {
2693 BlockDriverState *bs;
2694 int64_t offset;
2695 QEMUIOVector *qiov;
2696 bool is_write;
2697 int ret;
2698 BdrvRequestFlags flags;
2699 } RwCo;
2701 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2703 RwCo *rwco = opaque;
2705 if (!rwco->is_write) {
2706 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2707 rwco->qiov->size, rwco->qiov,
2708 rwco->flags);
2709 } else {
2710 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2711 rwco->qiov->size, rwco->qiov,
2712 rwco->flags);
2717 * Process a vectored synchronous request using coroutines
2719 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2720 QEMUIOVector *qiov, bool is_write,
2721 BdrvRequestFlags flags)
2723 Coroutine *co;
2724 RwCo rwco = {
2725 .bs = bs,
2726 .offset = offset,
2727 .qiov = qiov,
2728 .is_write = is_write,
2729 .ret = NOT_DONE,
2730 .flags = flags,
2734 * In sync call context, when the vcpu is blocked, this throttling timer
2735 * will not fire; so the I/O throttling function has to be disabled here
2736 * if it has been enabled.
2738 if (bs->io_limits_enabled) {
2739 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2740 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2741 bdrv_io_limits_disable(bs);
2744 if (qemu_in_coroutine()) {
2745 /* Fast-path if already in coroutine context */
2746 bdrv_rw_co_entry(&rwco);
2747 } else {
2748 AioContext *aio_context = bdrv_get_aio_context(bs);
2750 co = qemu_coroutine_create(bdrv_rw_co_entry);
2751 qemu_coroutine_enter(co, &rwco);
2752 while (rwco.ret == NOT_DONE) {
2753 aio_poll(aio_context, true);
2756 return rwco.ret;
2760 * Process a synchronous request using coroutines
2762 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2763 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2765 QEMUIOVector qiov;
2766 struct iovec iov = {
2767 .iov_base = (void *)buf,
2768 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2771 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2772 return -EINVAL;
2775 qemu_iovec_init_external(&qiov, &iov, 1);
2776 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2777 &qiov, is_write, flags);
2780 /* return < 0 if error. See bdrv_write() for the return codes */
2781 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2782 uint8_t *buf, int nb_sectors)
2784 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2787 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2788 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2789 uint8_t *buf, int nb_sectors)
2791 bool enabled;
2792 int ret;
2794 enabled = bs->io_limits_enabled;
2795 bs->io_limits_enabled = false;
2796 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2797 bs->io_limits_enabled = enabled;
2798 return ret;
2801 /* Return < 0 if error. Important errors are:
2802 -EIO generic I/O error (may happen for all errors)
2803 -ENOMEDIUM No media inserted.
2804 -EINVAL Invalid sector number or nb_sectors
2805 -EACCES Trying to write a read-only device
2807 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2808 const uint8_t *buf, int nb_sectors)
2810 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2813 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2814 int nb_sectors, BdrvRequestFlags flags)
2816 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2817 BDRV_REQ_ZERO_WRITE | flags);
2821 * Completely zero out a block device with the help of bdrv_write_zeroes.
2822 * The operation is sped up by checking the block status and only writing
2823 * zeroes to the device if they currently do not return zeroes. Optional
2824 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2826 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2828 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2830 int64_t target_size;
2831 int64_t ret, nb_sectors, sector_num = 0;
2832 int n;
2834 target_size = bdrv_getlength(bs);
2835 if (target_size < 0) {
2836 return target_size;
2838 target_size /= BDRV_SECTOR_SIZE;
2840 for (;;) {
2841 nb_sectors = target_size - sector_num;
2842 if (nb_sectors <= 0) {
2843 return 0;
2845 if (nb_sectors > INT_MAX) {
2846 nb_sectors = INT_MAX;
2848 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2849 if (ret < 0) {
2850 error_report("error getting block status at sector %" PRId64 ": %s",
2851 sector_num, strerror(-ret));
2852 return ret;
2854 if (ret & BDRV_BLOCK_ZERO) {
2855 sector_num += n;
2856 continue;
2858 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2859 if (ret < 0) {
2860 error_report("error writing zeroes at sector %" PRId64 ": %s",
2861 sector_num, strerror(-ret));
2862 return ret;
2864 sector_num += n;
2868 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2870 QEMUIOVector qiov;
2871 struct iovec iov = {
2872 .iov_base = (void *)buf,
2873 .iov_len = bytes,
2875 int ret;
2877 if (bytes < 0) {
2878 return -EINVAL;
2881 qemu_iovec_init_external(&qiov, &iov, 1);
2882 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2883 if (ret < 0) {
2884 return ret;
2887 return bytes;
2890 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2892 int ret;
2894 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2895 if (ret < 0) {
2896 return ret;
2899 return qiov->size;
2902 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2903 const void *buf, int bytes)
2905 QEMUIOVector qiov;
2906 struct iovec iov = {
2907 .iov_base = (void *) buf,
2908 .iov_len = bytes,
2911 if (bytes < 0) {
2912 return -EINVAL;
2915 qemu_iovec_init_external(&qiov, &iov, 1);
2916 return bdrv_pwritev(bs, offset, &qiov);
2920 * Writes to the file and ensures that no writes are reordered across this
2921 * request (acts as a barrier)
2923 * Returns 0 on success, -errno in error cases.
2925 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2926 const void *buf, int count)
2928 int ret;
2930 ret = bdrv_pwrite(bs, offset, buf, count);
2931 if (ret < 0) {
2932 return ret;
2935 /* No flush needed for cache modes that already do it */
2936 if (bs->enable_write_cache) {
2937 bdrv_flush(bs);
2940 return 0;
2943 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2944 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2946 /* Perform I/O through a temporary buffer so that users who scribble over
2947 * their read buffer while the operation is in progress do not end up
2948 * modifying the image file. This is critical for zero-copy guest I/O
2949 * where anything might happen inside guest memory.
2951 void *bounce_buffer;
2953 BlockDriver *drv = bs->drv;
2954 struct iovec iov;
2955 QEMUIOVector bounce_qiov;
2956 int64_t cluster_sector_num;
2957 int cluster_nb_sectors;
2958 size_t skip_bytes;
2959 int ret;
2961 /* Cover entire cluster so no additional backing file I/O is required when
2962 * allocating cluster in the image file.
2964 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2965 &cluster_sector_num, &cluster_nb_sectors);
2967 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2968 cluster_sector_num, cluster_nb_sectors);
2970 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2971 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2972 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2974 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2975 &bounce_qiov);
2976 if (ret < 0) {
2977 goto err;
2980 if (drv->bdrv_co_write_zeroes &&
2981 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2982 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2983 cluster_nb_sectors, 0);
2984 } else {
2985 /* This does not change the data on the disk, it is not necessary
2986 * to flush even in cache=writethrough mode.
2988 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2989 &bounce_qiov);
2992 if (ret < 0) {
2993 /* It might be okay to ignore write errors for guest requests. If this
2994 * is a deliberate copy-on-read then we don't want to ignore the error.
2995 * Simply report it in all cases.
2997 goto err;
3000 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
3001 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
3002 nb_sectors * BDRV_SECTOR_SIZE);
3004 err:
3005 qemu_vfree(bounce_buffer);
3006 return ret;
3010 * Forwards an already correctly aligned request to the BlockDriver. This
3011 * handles copy on read and zeroing after EOF; any other features must be
3012 * implemented by the caller.
3014 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3015 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3016 int64_t align, QEMUIOVector *qiov, int flags)
3018 BlockDriver *drv = bs->drv;
3019 int ret;
3021 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3022 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3024 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3025 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3026 assert(!qiov || bytes == qiov->size);
3028 /* Handle Copy on Read and associated serialisation */
3029 if (flags & BDRV_REQ_COPY_ON_READ) {
3030 /* If we touch the same cluster it counts as an overlap. This
3031 * guarantees that allocating writes will be serialized and not race
3032 * with each other for the same cluster. For example, in copy-on-read
3033 * it ensures that the CoR read and write operations are atomic and
3034 * guest writes cannot interleave between them. */
3035 mark_request_serialising(req, bdrv_get_cluster_size(bs));
3038 wait_serialising_requests(req);
3040 if (flags & BDRV_REQ_COPY_ON_READ) {
3041 int pnum;
3043 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3044 if (ret < 0) {
3045 goto out;
3048 if (!ret || pnum != nb_sectors) {
3049 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3050 goto out;
3054 /* Forward the request to the BlockDriver */
3055 if (!(bs->zero_beyond_eof && bs->growable)) {
3056 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3057 } else {
3058 /* Read zeros after EOF of growable BDSes */
3059 int64_t len, total_sectors, max_nb_sectors;
3061 len = bdrv_getlength(bs);
3062 if (len < 0) {
3063 ret = len;
3064 goto out;
3067 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3068 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3069 align >> BDRV_SECTOR_BITS);
3070 if (max_nb_sectors > 0) {
3071 QEMUIOVector local_qiov;
3072 size_t local_sectors;
3074 max_nb_sectors = MIN(max_nb_sectors, SIZE_MAX / BDRV_SECTOR_BITS);
3075 local_sectors = MIN(max_nb_sectors, nb_sectors);
3077 qemu_iovec_init(&local_qiov, qiov->niov);
3078 qemu_iovec_concat(&local_qiov, qiov, 0,
3079 local_sectors * BDRV_SECTOR_SIZE);
3081 ret = drv->bdrv_co_readv(bs, sector_num, local_sectors,
3082 &local_qiov);
3084 qemu_iovec_destroy(&local_qiov);
3085 } else {
3086 ret = 0;
3089 /* Reading beyond end of file is supposed to produce zeroes */
3090 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3091 uint64_t offset = MAX(0, total_sectors - sector_num);
3092 uint64_t bytes = (sector_num + nb_sectors - offset) *
3093 BDRV_SECTOR_SIZE;
3094 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3098 out:
3099 return ret;
3103 * Handle a read request in coroutine context
3105 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3106 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3107 BdrvRequestFlags flags)
3109 BlockDriver *drv = bs->drv;
3110 BdrvTrackedRequest req;
3112 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3113 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3114 uint8_t *head_buf = NULL;
3115 uint8_t *tail_buf = NULL;
3116 QEMUIOVector local_qiov;
3117 bool use_local_qiov = false;
3118 int ret;
3120 if (!drv) {
3121 return -ENOMEDIUM;
3123 if (bdrv_check_byte_request(bs, offset, bytes)) {
3124 return -EIO;
3127 if (bs->copy_on_read) {
3128 flags |= BDRV_REQ_COPY_ON_READ;
3131 /* throttling disk I/O */
3132 if (bs->io_limits_enabled) {
3133 bdrv_io_limits_intercept(bs, bytes, false);
3136 /* Align read if necessary by padding qiov */
3137 if (offset & (align - 1)) {
3138 head_buf = qemu_blockalign(bs, align);
3139 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3140 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3141 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3142 use_local_qiov = true;
3144 bytes += offset & (align - 1);
3145 offset = offset & ~(align - 1);
3148 if ((offset + bytes) & (align - 1)) {
3149 if (!use_local_qiov) {
3150 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3151 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3152 use_local_qiov = true;
3154 tail_buf = qemu_blockalign(bs, align);
3155 qemu_iovec_add(&local_qiov, tail_buf,
3156 align - ((offset + bytes) & (align - 1)));
3158 bytes = ROUND_UP(bytes, align);
3161 tracked_request_begin(&req, bs, offset, bytes, false);
3162 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3163 use_local_qiov ? &local_qiov : qiov,
3164 flags);
3165 tracked_request_end(&req);
3167 if (use_local_qiov) {
3168 qemu_iovec_destroy(&local_qiov);
3169 qemu_vfree(head_buf);
3170 qemu_vfree(tail_buf);
3173 return ret;
3176 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3177 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3178 BdrvRequestFlags flags)
3180 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3181 return -EINVAL;
3184 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3185 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3188 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3189 int nb_sectors, QEMUIOVector *qiov)
3191 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3193 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3196 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3197 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3199 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3201 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3202 BDRV_REQ_COPY_ON_READ);
3205 /* if no limit is specified in the BlockLimits use a default
3206 * of 32768 512-byte sectors (16 MiB) per request.
3208 #define MAX_WRITE_ZEROES_DEFAULT 32768
3210 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3211 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3213 BlockDriver *drv = bs->drv;
3214 QEMUIOVector qiov;
3215 struct iovec iov = {0};
3216 int ret = 0;
3218 int max_write_zeroes = bs->bl.max_write_zeroes ?
3219 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3221 while (nb_sectors > 0 && !ret) {
3222 int num = nb_sectors;
3224 /* Align request. Block drivers can expect the "bulk" of the request
3225 * to be aligned.
3227 if (bs->bl.write_zeroes_alignment
3228 && num > bs->bl.write_zeroes_alignment) {
3229 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3230 /* Make a small request up to the first aligned sector. */
3231 num = bs->bl.write_zeroes_alignment;
3232 num -= sector_num % bs->bl.write_zeroes_alignment;
3233 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3234 /* Shorten the request to the last aligned sector. num cannot
3235 * underflow because num > bs->bl.write_zeroes_alignment.
3237 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3241 /* limit request size */
3242 if (num > max_write_zeroes) {
3243 num = max_write_zeroes;
3246 ret = -ENOTSUP;
3247 /* First try the efficient write zeroes operation */
3248 if (drv->bdrv_co_write_zeroes) {
3249 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3252 if (ret == -ENOTSUP) {
3253 /* Fall back to bounce buffer if write zeroes is unsupported */
3254 iov.iov_len = num * BDRV_SECTOR_SIZE;
3255 if (iov.iov_base == NULL) {
3256 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3257 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3259 qemu_iovec_init_external(&qiov, &iov, 1);
3261 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3263 /* Keep bounce buffer around if it is big enough for all
3264 * all future requests.
3266 if (num < max_write_zeroes) {
3267 qemu_vfree(iov.iov_base);
3268 iov.iov_base = NULL;
3272 sector_num += num;
3273 nb_sectors -= num;
3276 qemu_vfree(iov.iov_base);
3277 return ret;
3281 * Forwards an already correctly aligned write request to the BlockDriver.
3283 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3284 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3285 QEMUIOVector *qiov, int flags)
3287 BlockDriver *drv = bs->drv;
3288 bool waited;
3289 int ret;
3291 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3292 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3294 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3295 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3296 assert(!qiov || bytes == qiov->size);
3298 waited = wait_serialising_requests(req);
3299 assert(!waited || !req->serialising);
3300 assert(req->overlap_offset <= offset);
3301 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3303 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3305 if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3306 !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3307 qemu_iovec_is_zero(qiov)) {
3308 flags |= BDRV_REQ_ZERO_WRITE;
3309 if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3310 flags |= BDRV_REQ_MAY_UNMAP;
3314 if (ret < 0) {
3315 /* Do nothing, write notifier decided to fail this request */
3316 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3317 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3318 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3319 } else {
3320 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3321 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3323 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3325 if (ret == 0 && !bs->enable_write_cache) {
3326 ret = bdrv_co_flush(bs);
3329 bdrv_set_dirty(bs, sector_num, nb_sectors);
3331 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3332 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3334 if (bs->growable && ret >= 0) {
3335 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3338 return ret;
3342 * Handle a write request in coroutine context
3344 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3345 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3346 BdrvRequestFlags flags)
3348 BdrvTrackedRequest req;
3349 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3350 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3351 uint8_t *head_buf = NULL;
3352 uint8_t *tail_buf = NULL;
3353 QEMUIOVector local_qiov;
3354 bool use_local_qiov = false;
3355 int ret;
3357 if (!bs->drv) {
3358 return -ENOMEDIUM;
3360 if (bs->read_only) {
3361 return -EACCES;
3363 if (bdrv_check_byte_request(bs, offset, bytes)) {
3364 return -EIO;
3367 /* throttling disk I/O */
3368 if (bs->io_limits_enabled) {
3369 bdrv_io_limits_intercept(bs, bytes, true);
3373 * Align write if necessary by performing a read-modify-write cycle.
3374 * Pad qiov with the read parts and be sure to have a tracked request not
3375 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3377 tracked_request_begin(&req, bs, offset, bytes, true);
3379 if (offset & (align - 1)) {
3380 QEMUIOVector head_qiov;
3381 struct iovec head_iov;
3383 mark_request_serialising(&req, align);
3384 wait_serialising_requests(&req);
3386 head_buf = qemu_blockalign(bs, align);
3387 head_iov = (struct iovec) {
3388 .iov_base = head_buf,
3389 .iov_len = align,
3391 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3393 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3394 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3395 align, &head_qiov, 0);
3396 if (ret < 0) {
3397 goto fail;
3399 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3401 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3402 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3403 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3404 use_local_qiov = true;
3406 bytes += offset & (align - 1);
3407 offset = offset & ~(align - 1);
3410 if ((offset + bytes) & (align - 1)) {
3411 QEMUIOVector tail_qiov;
3412 struct iovec tail_iov;
3413 size_t tail_bytes;
3414 bool waited;
3416 mark_request_serialising(&req, align);
3417 waited = wait_serialising_requests(&req);
3418 assert(!waited || !use_local_qiov);
3420 tail_buf = qemu_blockalign(bs, align);
3421 tail_iov = (struct iovec) {
3422 .iov_base = tail_buf,
3423 .iov_len = align,
3425 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3427 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3428 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3429 align, &tail_qiov, 0);
3430 if (ret < 0) {
3431 goto fail;
3433 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3435 if (!use_local_qiov) {
3436 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3437 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3438 use_local_qiov = true;
3441 tail_bytes = (offset + bytes) & (align - 1);
3442 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3444 bytes = ROUND_UP(bytes, align);
3447 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3448 use_local_qiov ? &local_qiov : qiov,
3449 flags);
3451 fail:
3452 tracked_request_end(&req);
3454 if (use_local_qiov) {
3455 qemu_iovec_destroy(&local_qiov);
3457 qemu_vfree(head_buf);
3458 qemu_vfree(tail_buf);
3460 return ret;
3463 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3464 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3465 BdrvRequestFlags flags)
3467 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3468 return -EINVAL;
3471 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3472 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3475 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3476 int nb_sectors, QEMUIOVector *qiov)
3478 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3480 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3483 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3484 int64_t sector_num, int nb_sectors,
3485 BdrvRequestFlags flags)
3487 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3489 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3490 flags &= ~BDRV_REQ_MAY_UNMAP;
3493 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3494 BDRV_REQ_ZERO_WRITE | flags);
3498 * Truncate file to 'offset' bytes (needed only for file protocols)
3500 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3502 BlockDriver *drv = bs->drv;
3503 int ret;
3504 if (!drv)
3505 return -ENOMEDIUM;
3506 if (!drv->bdrv_truncate)
3507 return -ENOTSUP;
3508 if (bs->read_only)
3509 return -EACCES;
3511 ret = drv->bdrv_truncate(bs, offset);
3512 if (ret == 0) {
3513 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3514 bdrv_dev_resize_cb(bs);
3516 return ret;
3520 * Length of a allocated file in bytes. Sparse files are counted by actual
3521 * allocated space. Return < 0 if error or unknown.
3523 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3525 BlockDriver *drv = bs->drv;
3526 if (!drv) {
3527 return -ENOMEDIUM;
3529 if (drv->bdrv_get_allocated_file_size) {
3530 return drv->bdrv_get_allocated_file_size(bs);
3532 if (bs->file) {
3533 return bdrv_get_allocated_file_size(bs->file);
3535 return -ENOTSUP;
3539 * Length of a file in bytes. Return < 0 if error or unknown.
3541 int64_t bdrv_getlength(BlockDriverState *bs)
3543 BlockDriver *drv = bs->drv;
3544 if (!drv)
3545 return -ENOMEDIUM;
3547 if (drv->has_variable_length) {
3548 int ret = refresh_total_sectors(bs, bs->total_sectors);
3549 if (ret < 0) {
3550 return ret;
3553 return bs->total_sectors * BDRV_SECTOR_SIZE;
3556 /* return 0 as number of sectors if no device present or error */
3557 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3559 int64_t length;
3560 length = bdrv_getlength(bs);
3561 if (length < 0)
3562 length = 0;
3563 else
3564 length = length >> BDRV_SECTOR_BITS;
3565 *nb_sectors_ptr = length;
3568 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3569 BlockdevOnError on_write_error)
3571 bs->on_read_error = on_read_error;
3572 bs->on_write_error = on_write_error;
3575 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3577 return is_read ? bs->on_read_error : bs->on_write_error;
3580 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3582 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3584 switch (on_err) {
3585 case BLOCKDEV_ON_ERROR_ENOSPC:
3586 return (error == ENOSPC) ?
3587 BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3588 case BLOCKDEV_ON_ERROR_STOP:
3589 return BLOCK_ERROR_ACTION_STOP;
3590 case BLOCKDEV_ON_ERROR_REPORT:
3591 return BLOCK_ERROR_ACTION_REPORT;
3592 case BLOCKDEV_ON_ERROR_IGNORE:
3593 return BLOCK_ERROR_ACTION_IGNORE;
3594 default:
3595 abort();
3599 /* This is done by device models because, while the block layer knows
3600 * about the error, it does not know whether an operation comes from
3601 * the device or the block layer (from a job, for example).
3603 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3604 bool is_read, int error)
3606 assert(error >= 0);
3608 if (action == BLOCK_ERROR_ACTION_STOP) {
3609 /* First set the iostatus, so that "info block" returns an iostatus
3610 * that matches the events raised so far (an additional error iostatus
3611 * is fine, but not a lost one).
3613 bdrv_iostatus_set_err(bs, error);
3615 /* Then raise the request to stop the VM and the event.
3616 * qemu_system_vmstop_request_prepare has two effects. First,
3617 * it ensures that the STOP event always comes after the
3618 * BLOCK_IO_ERROR event. Second, it ensures that even if management
3619 * can observe the STOP event and do a "cont" before the STOP
3620 * event is issued, the VM will not stop. In this case, vm_start()
3621 * also ensures that the STOP/RESUME pair of events is emitted.
3623 qemu_system_vmstop_request_prepare();
3624 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3625 is_read ? IO_OPERATION_TYPE_READ :
3626 IO_OPERATION_TYPE_WRITE,
3627 action, &error_abort);
3628 qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3629 } else {
3630 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3631 is_read ? IO_OPERATION_TYPE_READ :
3632 IO_OPERATION_TYPE_WRITE,
3633 action, &error_abort);
3637 int bdrv_is_read_only(BlockDriverState *bs)
3639 return bs->read_only;
3642 int bdrv_is_sg(BlockDriverState *bs)
3644 return bs->sg;
3647 int bdrv_enable_write_cache(BlockDriverState *bs)
3649 return bs->enable_write_cache;
3652 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3654 bs->enable_write_cache = wce;
3656 /* so a reopen() will preserve wce */
3657 if (wce) {
3658 bs->open_flags |= BDRV_O_CACHE_WB;
3659 } else {
3660 bs->open_flags &= ~BDRV_O_CACHE_WB;
3664 int bdrv_is_encrypted(BlockDriverState *bs)
3666 if (bs->backing_hd && bs->backing_hd->encrypted)
3667 return 1;
3668 return bs->encrypted;
3671 int bdrv_key_required(BlockDriverState *bs)
3673 BlockDriverState *backing_hd = bs->backing_hd;
3675 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3676 return 1;
3677 return (bs->encrypted && !bs->valid_key);
3680 int bdrv_set_key(BlockDriverState *bs, const char *key)
3682 int ret;
3683 if (bs->backing_hd && bs->backing_hd->encrypted) {
3684 ret = bdrv_set_key(bs->backing_hd, key);
3685 if (ret < 0)
3686 return ret;
3687 if (!bs->encrypted)
3688 return 0;
3690 if (!bs->encrypted) {
3691 return -EINVAL;
3692 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3693 return -ENOMEDIUM;
3695 ret = bs->drv->bdrv_set_key(bs, key);
3696 if (ret < 0) {
3697 bs->valid_key = 0;
3698 } else if (!bs->valid_key) {
3699 bs->valid_key = 1;
3700 /* call the change callback now, we skipped it on open */
3701 bdrv_dev_change_media_cb(bs, true);
3703 return ret;
3706 const char *bdrv_get_format_name(BlockDriverState *bs)
3708 return bs->drv ? bs->drv->format_name : NULL;
3711 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3712 void *opaque)
3714 BlockDriver *drv;
3715 int count = 0;
3716 const char **formats = NULL;
3718 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3719 if (drv->format_name) {
3720 bool found = false;
3721 int i = count;
3722 while (formats && i && !found) {
3723 found = !strcmp(formats[--i], drv->format_name);
3726 if (!found) {
3727 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3728 formats[count++] = drv->format_name;
3729 it(opaque, drv->format_name);
3733 g_free(formats);
3736 /* This function is to find block backend bs */
3737 BlockDriverState *bdrv_find(const char *name)
3739 BlockDriverState *bs;
3741 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3742 if (!strcmp(name, bs->device_name)) {
3743 return bs;
3746 return NULL;
3749 /* This function is to find a node in the bs graph */
3750 BlockDriverState *bdrv_find_node(const char *node_name)
3752 BlockDriverState *bs;
3754 assert(node_name);
3756 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3757 if (!strcmp(node_name, bs->node_name)) {
3758 return bs;
3761 return NULL;
3764 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3765 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3767 BlockDeviceInfoList *list, *entry;
3768 BlockDriverState *bs;
3770 list = NULL;
3771 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3772 entry = g_malloc0(sizeof(*entry));
3773 entry->value = bdrv_block_device_info(bs);
3774 entry->next = list;
3775 list = entry;
3778 return list;
3781 BlockDriverState *bdrv_lookup_bs(const char *device,
3782 const char *node_name,
3783 Error **errp)
3785 BlockDriverState *bs = NULL;
3787 if (device) {
3788 bs = bdrv_find(device);
3790 if (bs) {
3791 return bs;
3795 if (node_name) {
3796 bs = bdrv_find_node(node_name);
3798 if (bs) {
3799 return bs;
3803 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3804 device ? device : "",
3805 node_name ? node_name : "");
3806 return NULL;
3809 /* If 'base' is in the same chain as 'top', return true. Otherwise,
3810 * return false. If either argument is NULL, return false. */
3811 bool bdrv_chain_contains(BlockDriverState *top, BlockDriverState *base)
3813 while (top && top != base) {
3814 top = top->backing_hd;
3817 return top != NULL;
3820 BlockDriverState *bdrv_next(BlockDriverState *bs)
3822 if (!bs) {
3823 return QTAILQ_FIRST(&bdrv_states);
3825 return QTAILQ_NEXT(bs, device_list);
3828 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3830 BlockDriverState *bs;
3832 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3833 it(opaque, bs);
3837 const char *bdrv_get_device_name(BlockDriverState *bs)
3839 return bs->device_name;
3842 int bdrv_get_flags(BlockDriverState *bs)
3844 return bs->open_flags;
3847 int bdrv_flush_all(void)
3849 BlockDriverState *bs;
3850 int result = 0;
3852 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3853 AioContext *aio_context = bdrv_get_aio_context(bs);
3854 int ret;
3856 aio_context_acquire(aio_context);
3857 ret = bdrv_flush(bs);
3858 if (ret < 0 && !result) {
3859 result = ret;
3861 aio_context_release(aio_context);
3864 return result;
3867 int bdrv_has_zero_init_1(BlockDriverState *bs)
3869 return 1;
3872 int bdrv_has_zero_init(BlockDriverState *bs)
3874 assert(bs->drv);
3876 /* If BS is a copy on write image, it is initialized to
3877 the contents of the base image, which may not be zeroes. */
3878 if (bs->backing_hd) {
3879 return 0;
3881 if (bs->drv->bdrv_has_zero_init) {
3882 return bs->drv->bdrv_has_zero_init(bs);
3885 /* safe default */
3886 return 0;
3889 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3891 BlockDriverInfo bdi;
3893 if (bs->backing_hd) {
3894 return false;
3897 if (bdrv_get_info(bs, &bdi) == 0) {
3898 return bdi.unallocated_blocks_are_zero;
3901 return false;
3904 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3906 BlockDriverInfo bdi;
3908 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3909 return false;
3912 if (bdrv_get_info(bs, &bdi) == 0) {
3913 return bdi.can_write_zeroes_with_unmap;
3916 return false;
3919 typedef struct BdrvCoGetBlockStatusData {
3920 BlockDriverState *bs;
3921 BlockDriverState *base;
3922 int64_t sector_num;
3923 int nb_sectors;
3924 int *pnum;
3925 int64_t ret;
3926 bool done;
3927 } BdrvCoGetBlockStatusData;
3930 * Returns true iff the specified sector is present in the disk image. Drivers
3931 * not implementing the functionality are assumed to not support backing files,
3932 * hence all their sectors are reported as allocated.
3934 * If 'sector_num' is beyond the end of the disk image the return value is 0
3935 * and 'pnum' is set to 0.
3937 * 'pnum' is set to the number of sectors (including and immediately following
3938 * the specified sector) that are known to be in the same
3939 * allocated/unallocated state.
3941 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3942 * beyond the end of the disk image it will be clamped.
3944 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3945 int64_t sector_num,
3946 int nb_sectors, int *pnum)
3948 int64_t length;
3949 int64_t n;
3950 int64_t ret, ret2;
3952 length = bdrv_getlength(bs);
3953 if (length < 0) {
3954 return length;
3957 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3958 *pnum = 0;
3959 return 0;
3962 n = bs->total_sectors - sector_num;
3963 if (n < nb_sectors) {
3964 nb_sectors = n;
3967 if (!bs->drv->bdrv_co_get_block_status) {
3968 *pnum = nb_sectors;
3969 ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3970 if (bs->drv->protocol_name) {
3971 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3973 return ret;
3976 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3977 if (ret < 0) {
3978 *pnum = 0;
3979 return ret;
3982 if (ret & BDRV_BLOCK_RAW) {
3983 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3984 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3985 *pnum, pnum);
3988 if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3989 ret |= BDRV_BLOCK_ALLOCATED;
3992 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3993 if (bdrv_unallocated_blocks_are_zero(bs)) {
3994 ret |= BDRV_BLOCK_ZERO;
3995 } else if (bs->backing_hd) {
3996 BlockDriverState *bs2 = bs->backing_hd;
3997 int64_t length2 = bdrv_getlength(bs2);
3998 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3999 ret |= BDRV_BLOCK_ZERO;
4004 if (bs->file &&
4005 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
4006 (ret & BDRV_BLOCK_OFFSET_VALID)) {
4007 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
4008 *pnum, pnum);
4009 if (ret2 >= 0) {
4010 /* Ignore errors. This is just providing extra information, it
4011 * is useful but not necessary.
4013 ret |= (ret2 & BDRV_BLOCK_ZERO);
4017 return ret;
4020 /* Coroutine wrapper for bdrv_get_block_status() */
4021 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
4023 BdrvCoGetBlockStatusData *data = opaque;
4024 BlockDriverState *bs = data->bs;
4026 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
4027 data->pnum);
4028 data->done = true;
4032 * Synchronous wrapper around bdrv_co_get_block_status().
4034 * See bdrv_co_get_block_status() for details.
4036 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4037 int nb_sectors, int *pnum)
4039 Coroutine *co;
4040 BdrvCoGetBlockStatusData data = {
4041 .bs = bs,
4042 .sector_num = sector_num,
4043 .nb_sectors = nb_sectors,
4044 .pnum = pnum,
4045 .done = false,
4048 if (qemu_in_coroutine()) {
4049 /* Fast-path if already in coroutine context */
4050 bdrv_get_block_status_co_entry(&data);
4051 } else {
4052 AioContext *aio_context = bdrv_get_aio_context(bs);
4054 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4055 qemu_coroutine_enter(co, &data);
4056 while (!data.done) {
4057 aio_poll(aio_context, true);
4060 return data.ret;
4063 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4064 int nb_sectors, int *pnum)
4066 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4067 if (ret < 0) {
4068 return ret;
4070 return !!(ret & BDRV_BLOCK_ALLOCATED);
4074 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4076 * Return true if the given sector is allocated in any image between
4077 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4078 * sector is allocated in any image of the chain. Return false otherwise.
4080 * 'pnum' is set to the number of sectors (including and immediately following
4081 * the specified sector) that are known to be in the same
4082 * allocated/unallocated state.
4085 int bdrv_is_allocated_above(BlockDriverState *top,
4086 BlockDriverState *base,
4087 int64_t sector_num,
4088 int nb_sectors, int *pnum)
4090 BlockDriverState *intermediate;
4091 int ret, n = nb_sectors;
4093 intermediate = top;
4094 while (intermediate && intermediate != base) {
4095 int pnum_inter;
4096 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4097 &pnum_inter);
4098 if (ret < 0) {
4099 return ret;
4100 } else if (ret) {
4101 *pnum = pnum_inter;
4102 return 1;
4106 * [sector_num, nb_sectors] is unallocated on top but intermediate
4107 * might have
4109 * [sector_num+x, nr_sectors] allocated.
4111 if (n > pnum_inter &&
4112 (intermediate == top ||
4113 sector_num + pnum_inter < intermediate->total_sectors)) {
4114 n = pnum_inter;
4117 intermediate = intermediate->backing_hd;
4120 *pnum = n;
4121 return 0;
4124 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4126 if (bs->backing_hd && bs->backing_hd->encrypted)
4127 return bs->backing_file;
4128 else if (bs->encrypted)
4129 return bs->filename;
4130 else
4131 return NULL;
4134 void bdrv_get_backing_filename(BlockDriverState *bs,
4135 char *filename, int filename_size)
4137 pstrcpy(filename, filename_size, bs->backing_file);
4140 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4141 const uint8_t *buf, int nb_sectors)
4143 BlockDriver *drv = bs->drv;
4144 if (!drv)
4145 return -ENOMEDIUM;
4146 if (!drv->bdrv_write_compressed)
4147 return -ENOTSUP;
4148 if (bdrv_check_request(bs, sector_num, nb_sectors))
4149 return -EIO;
4151 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4153 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4156 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4158 BlockDriver *drv = bs->drv;
4159 if (!drv)
4160 return -ENOMEDIUM;
4161 if (!drv->bdrv_get_info)
4162 return -ENOTSUP;
4163 memset(bdi, 0, sizeof(*bdi));
4164 return drv->bdrv_get_info(bs, bdi);
4167 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4169 BlockDriver *drv = bs->drv;
4170 if (drv && drv->bdrv_get_specific_info) {
4171 return drv->bdrv_get_specific_info(bs);
4173 return NULL;
4176 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4177 int64_t pos, int size)
4179 QEMUIOVector qiov;
4180 struct iovec iov = {
4181 .iov_base = (void *) buf,
4182 .iov_len = size,
4185 qemu_iovec_init_external(&qiov, &iov, 1);
4186 return bdrv_writev_vmstate(bs, &qiov, pos);
4189 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4191 BlockDriver *drv = bs->drv;
4193 if (!drv) {
4194 return -ENOMEDIUM;
4195 } else if (drv->bdrv_save_vmstate) {
4196 return drv->bdrv_save_vmstate(bs, qiov, pos);
4197 } else if (bs->file) {
4198 return bdrv_writev_vmstate(bs->file, qiov, pos);
4201 return -ENOTSUP;
4204 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4205 int64_t pos, int size)
4207 BlockDriver *drv = bs->drv;
4208 if (!drv)
4209 return -ENOMEDIUM;
4210 if (drv->bdrv_load_vmstate)
4211 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4212 if (bs->file)
4213 return bdrv_load_vmstate(bs->file, buf, pos, size);
4214 return -ENOTSUP;
4217 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4219 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4220 return;
4223 bs->drv->bdrv_debug_event(bs, event);
4226 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4227 const char *tag)
4229 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4230 bs = bs->file;
4233 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4234 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4237 return -ENOTSUP;
4240 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4242 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4243 bs = bs->file;
4246 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4247 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4250 return -ENOTSUP;
4253 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4255 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4256 bs = bs->file;
4259 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4260 return bs->drv->bdrv_debug_resume(bs, tag);
4263 return -ENOTSUP;
4266 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4268 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4269 bs = bs->file;
4272 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4273 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4276 return false;
4279 int bdrv_is_snapshot(BlockDriverState *bs)
4281 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4284 /* backing_file can either be relative, or absolute, or a protocol. If it is
4285 * relative, it must be relative to the chain. So, passing in bs->filename
4286 * from a BDS as backing_file should not be done, as that may be relative to
4287 * the CWD rather than the chain. */
4288 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4289 const char *backing_file)
4291 char *filename_full = NULL;
4292 char *backing_file_full = NULL;
4293 char *filename_tmp = NULL;
4294 int is_protocol = 0;
4295 BlockDriverState *curr_bs = NULL;
4296 BlockDriverState *retval = NULL;
4298 if (!bs || !bs->drv || !backing_file) {
4299 return NULL;
4302 filename_full = g_malloc(PATH_MAX);
4303 backing_file_full = g_malloc(PATH_MAX);
4304 filename_tmp = g_malloc(PATH_MAX);
4306 is_protocol = path_has_protocol(backing_file);
4308 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4310 /* If either of the filename paths is actually a protocol, then
4311 * compare unmodified paths; otherwise make paths relative */
4312 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4313 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4314 retval = curr_bs->backing_hd;
4315 break;
4317 } else {
4318 /* If not an absolute filename path, make it relative to the current
4319 * image's filename path */
4320 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4321 backing_file);
4323 /* We are going to compare absolute pathnames */
4324 if (!realpath(filename_tmp, filename_full)) {
4325 continue;
4328 /* We need to make sure the backing filename we are comparing against
4329 * is relative to the current image filename (or absolute) */
4330 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4331 curr_bs->backing_file);
4333 if (!realpath(filename_tmp, backing_file_full)) {
4334 continue;
4337 if (strcmp(backing_file_full, filename_full) == 0) {
4338 retval = curr_bs->backing_hd;
4339 break;
4344 g_free(filename_full);
4345 g_free(backing_file_full);
4346 g_free(filename_tmp);
4347 return retval;
4350 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4352 if (!bs->drv) {
4353 return 0;
4356 if (!bs->backing_hd) {
4357 return 0;
4360 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4363 /**************************************************************/
4364 /* async I/Os */
4366 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4367 QEMUIOVector *qiov, int nb_sectors,
4368 BlockDriverCompletionFunc *cb, void *opaque)
4370 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4372 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4373 cb, opaque, false);
4376 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4377 QEMUIOVector *qiov, int nb_sectors,
4378 BlockDriverCompletionFunc *cb, void *opaque)
4380 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4382 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4383 cb, opaque, true);
4386 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4387 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4388 BlockDriverCompletionFunc *cb, void *opaque)
4390 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4392 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4393 BDRV_REQ_ZERO_WRITE | flags,
4394 cb, opaque, true);
4398 typedef struct MultiwriteCB {
4399 int error;
4400 int num_requests;
4401 int num_callbacks;
4402 struct {
4403 BlockDriverCompletionFunc *cb;
4404 void *opaque;
4405 QEMUIOVector *free_qiov;
4406 } callbacks[];
4407 } MultiwriteCB;
4409 static void multiwrite_user_cb(MultiwriteCB *mcb)
4411 int i;
4413 for (i = 0; i < mcb->num_callbacks; i++) {
4414 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4415 if (mcb->callbacks[i].free_qiov) {
4416 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4418 g_free(mcb->callbacks[i].free_qiov);
4422 static void multiwrite_cb(void *opaque, int ret)
4424 MultiwriteCB *mcb = opaque;
4426 trace_multiwrite_cb(mcb, ret);
4428 if (ret < 0 && !mcb->error) {
4429 mcb->error = ret;
4432 mcb->num_requests--;
4433 if (mcb->num_requests == 0) {
4434 multiwrite_user_cb(mcb);
4435 g_free(mcb);
4439 static int multiwrite_req_compare(const void *a, const void *b)
4441 const BlockRequest *req1 = a, *req2 = b;
4444 * Note that we can't simply subtract req2->sector from req1->sector
4445 * here as that could overflow the return value.
4447 if (req1->sector > req2->sector) {
4448 return 1;
4449 } else if (req1->sector < req2->sector) {
4450 return -1;
4451 } else {
4452 return 0;
4457 * Takes a bunch of requests and tries to merge them. Returns the number of
4458 * requests that remain after merging.
4460 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4461 int num_reqs, MultiwriteCB *mcb)
4463 int i, outidx;
4465 // Sort requests by start sector
4466 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4468 // Check if adjacent requests touch the same clusters. If so, combine them,
4469 // filling up gaps with zero sectors.
4470 outidx = 0;
4471 for (i = 1; i < num_reqs; i++) {
4472 int merge = 0;
4473 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4475 // Handle exactly sequential writes and overlapping writes.
4476 if (reqs[i].sector <= oldreq_last) {
4477 merge = 1;
4480 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4481 merge = 0;
4484 if (merge) {
4485 size_t size;
4486 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4487 qemu_iovec_init(qiov,
4488 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4490 // Add the first request to the merged one. If the requests are
4491 // overlapping, drop the last sectors of the first request.
4492 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4493 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4495 // We should need to add any zeros between the two requests
4496 assert (reqs[i].sector <= oldreq_last);
4498 // Add the second request
4499 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4501 reqs[outidx].nb_sectors = qiov->size >> 9;
4502 reqs[outidx].qiov = qiov;
4504 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4505 } else {
4506 outidx++;
4507 reqs[outidx].sector = reqs[i].sector;
4508 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4509 reqs[outidx].qiov = reqs[i].qiov;
4513 return outidx + 1;
4517 * Submit multiple AIO write requests at once.
4519 * On success, the function returns 0 and all requests in the reqs array have
4520 * been submitted. In error case this function returns -1, and any of the
4521 * requests may or may not be submitted yet. In particular, this means that the
4522 * callback will be called for some of the requests, for others it won't. The
4523 * caller must check the error field of the BlockRequest to wait for the right
4524 * callbacks (if error != 0, no callback will be called).
4526 * The implementation may modify the contents of the reqs array, e.g. to merge
4527 * requests. However, the fields opaque and error are left unmodified as they
4528 * are used to signal failure for a single request to the caller.
4530 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4532 MultiwriteCB *mcb;
4533 int i;
4535 /* don't submit writes if we don't have a medium */
4536 if (bs->drv == NULL) {
4537 for (i = 0; i < num_reqs; i++) {
4538 reqs[i].error = -ENOMEDIUM;
4540 return -1;
4543 if (num_reqs == 0) {
4544 return 0;
4547 // Create MultiwriteCB structure
4548 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4549 mcb->num_requests = 0;
4550 mcb->num_callbacks = num_reqs;
4552 for (i = 0; i < num_reqs; i++) {
4553 mcb->callbacks[i].cb = reqs[i].cb;
4554 mcb->callbacks[i].opaque = reqs[i].opaque;
4557 // Check for mergable requests
4558 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4560 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4562 /* Run the aio requests. */
4563 mcb->num_requests = num_reqs;
4564 for (i = 0; i < num_reqs; i++) {
4565 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4566 reqs[i].nb_sectors, reqs[i].flags,
4567 multiwrite_cb, mcb,
4568 true);
4571 return 0;
4574 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4576 acb->aiocb_info->cancel(acb);
4579 /**************************************************************/
4580 /* async block device emulation */
4582 typedef struct BlockDriverAIOCBSync {
4583 BlockDriverAIOCB common;
4584 QEMUBH *bh;
4585 int ret;
4586 /* vector translation state */
4587 QEMUIOVector *qiov;
4588 uint8_t *bounce;
4589 int is_write;
4590 } BlockDriverAIOCBSync;
4592 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4594 BlockDriverAIOCBSync *acb =
4595 container_of(blockacb, BlockDriverAIOCBSync, common);
4596 qemu_bh_delete(acb->bh);
4597 acb->bh = NULL;
4598 qemu_aio_release(acb);
4601 static const AIOCBInfo bdrv_em_aiocb_info = {
4602 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4603 .cancel = bdrv_aio_cancel_em,
4606 static void bdrv_aio_bh_cb(void *opaque)
4608 BlockDriverAIOCBSync *acb = opaque;
4610 if (!acb->is_write)
4611 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4612 qemu_vfree(acb->bounce);
4613 acb->common.cb(acb->common.opaque, acb->ret);
4614 qemu_bh_delete(acb->bh);
4615 acb->bh = NULL;
4616 qemu_aio_release(acb);
4619 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4620 int64_t sector_num,
4621 QEMUIOVector *qiov,
4622 int nb_sectors,
4623 BlockDriverCompletionFunc *cb,
4624 void *opaque,
4625 int is_write)
4628 BlockDriverAIOCBSync *acb;
4630 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4631 acb->is_write = is_write;
4632 acb->qiov = qiov;
4633 acb->bounce = qemu_blockalign(bs, qiov->size);
4634 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4636 if (is_write) {
4637 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4638 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4639 } else {
4640 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4643 qemu_bh_schedule(acb->bh);
4645 return &acb->common;
4648 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4649 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4650 BlockDriverCompletionFunc *cb, void *opaque)
4652 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4655 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4656 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4657 BlockDriverCompletionFunc *cb, void *opaque)
4659 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4663 typedef struct BlockDriverAIOCBCoroutine {
4664 BlockDriverAIOCB common;
4665 BlockRequest req;
4666 bool is_write;
4667 bool *done;
4668 QEMUBH* bh;
4669 } BlockDriverAIOCBCoroutine;
4671 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4673 AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4674 BlockDriverAIOCBCoroutine *acb =
4675 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4676 bool done = false;
4678 acb->done = &done;
4679 while (!done) {
4680 aio_poll(aio_context, true);
4684 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4685 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4686 .cancel = bdrv_aio_co_cancel_em,
4689 static void bdrv_co_em_bh(void *opaque)
4691 BlockDriverAIOCBCoroutine *acb = opaque;
4693 acb->common.cb(acb->common.opaque, acb->req.error);
4695 if (acb->done) {
4696 *acb->done = true;
4699 qemu_bh_delete(acb->bh);
4700 qemu_aio_release(acb);
4703 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4704 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4706 BlockDriverAIOCBCoroutine *acb = opaque;
4707 BlockDriverState *bs = acb->common.bs;
4709 if (!acb->is_write) {
4710 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4711 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4712 } else {
4713 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4714 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4717 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4718 qemu_bh_schedule(acb->bh);
4721 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4722 int64_t sector_num,
4723 QEMUIOVector *qiov,
4724 int nb_sectors,
4725 BdrvRequestFlags flags,
4726 BlockDriverCompletionFunc *cb,
4727 void *opaque,
4728 bool is_write)
4730 Coroutine *co;
4731 BlockDriverAIOCBCoroutine *acb;
4733 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4734 acb->req.sector = sector_num;
4735 acb->req.nb_sectors = nb_sectors;
4736 acb->req.qiov = qiov;
4737 acb->req.flags = flags;
4738 acb->is_write = is_write;
4739 acb->done = NULL;
4741 co = qemu_coroutine_create(bdrv_co_do_rw);
4742 qemu_coroutine_enter(co, acb);
4744 return &acb->common;
4747 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4749 BlockDriverAIOCBCoroutine *acb = opaque;
4750 BlockDriverState *bs = acb->common.bs;
4752 acb->req.error = bdrv_co_flush(bs);
4753 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4754 qemu_bh_schedule(acb->bh);
4757 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4758 BlockDriverCompletionFunc *cb, void *opaque)
4760 trace_bdrv_aio_flush(bs, opaque);
4762 Coroutine *co;
4763 BlockDriverAIOCBCoroutine *acb;
4765 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4766 acb->done = NULL;
4768 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4769 qemu_coroutine_enter(co, acb);
4771 return &acb->common;
4774 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4776 BlockDriverAIOCBCoroutine *acb = opaque;
4777 BlockDriverState *bs = acb->common.bs;
4779 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4780 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4781 qemu_bh_schedule(acb->bh);
4784 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4785 int64_t sector_num, int nb_sectors,
4786 BlockDriverCompletionFunc *cb, void *opaque)
4788 Coroutine *co;
4789 BlockDriverAIOCBCoroutine *acb;
4791 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4793 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4794 acb->req.sector = sector_num;
4795 acb->req.nb_sectors = nb_sectors;
4796 acb->done = NULL;
4797 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4798 qemu_coroutine_enter(co, acb);
4800 return &acb->common;
4803 void bdrv_init(void)
4805 module_call_init(MODULE_INIT_BLOCK);
4808 void bdrv_init_with_whitelist(void)
4810 use_bdrv_whitelist = 1;
4811 bdrv_init();
4814 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4815 BlockDriverCompletionFunc *cb, void *opaque)
4817 BlockDriverAIOCB *acb;
4819 acb = g_slice_alloc(aiocb_info->aiocb_size);
4820 acb->aiocb_info = aiocb_info;
4821 acb->bs = bs;
4822 acb->cb = cb;
4823 acb->opaque = opaque;
4824 return acb;
4827 void qemu_aio_release(void *p)
4829 BlockDriverAIOCB *acb = p;
4830 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4833 /**************************************************************/
4834 /* Coroutine block device emulation */
4836 typedef struct CoroutineIOCompletion {
4837 Coroutine *coroutine;
4838 int ret;
4839 } CoroutineIOCompletion;
4841 static void bdrv_co_io_em_complete(void *opaque, int ret)
4843 CoroutineIOCompletion *co = opaque;
4845 co->ret = ret;
4846 qemu_coroutine_enter(co->coroutine, NULL);
4849 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4850 int nb_sectors, QEMUIOVector *iov,
4851 bool is_write)
4853 CoroutineIOCompletion co = {
4854 .coroutine = qemu_coroutine_self(),
4856 BlockDriverAIOCB *acb;
4858 if (is_write) {
4859 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4860 bdrv_co_io_em_complete, &co);
4861 } else {
4862 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4863 bdrv_co_io_em_complete, &co);
4866 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4867 if (!acb) {
4868 return -EIO;
4870 qemu_coroutine_yield();
4872 return co.ret;
4875 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4876 int64_t sector_num, int nb_sectors,
4877 QEMUIOVector *iov)
4879 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4882 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4883 int64_t sector_num, int nb_sectors,
4884 QEMUIOVector *iov)
4886 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4889 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4891 RwCo *rwco = opaque;
4893 rwco->ret = bdrv_co_flush(rwco->bs);
4896 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4898 int ret;
4900 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4901 return 0;
4904 /* Write back cached data to the OS even with cache=unsafe */
4905 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4906 if (bs->drv->bdrv_co_flush_to_os) {
4907 ret = bs->drv->bdrv_co_flush_to_os(bs);
4908 if (ret < 0) {
4909 return ret;
4913 /* But don't actually force it to the disk with cache=unsafe */
4914 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4915 goto flush_parent;
4918 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4919 if (bs->drv->bdrv_co_flush_to_disk) {
4920 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4921 } else if (bs->drv->bdrv_aio_flush) {
4922 BlockDriverAIOCB *acb;
4923 CoroutineIOCompletion co = {
4924 .coroutine = qemu_coroutine_self(),
4927 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4928 if (acb == NULL) {
4929 ret = -EIO;
4930 } else {
4931 qemu_coroutine_yield();
4932 ret = co.ret;
4934 } else {
4936 * Some block drivers always operate in either writethrough or unsafe
4937 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4938 * know how the server works (because the behaviour is hardcoded or
4939 * depends on server-side configuration), so we can't ensure that
4940 * everything is safe on disk. Returning an error doesn't work because
4941 * that would break guests even if the server operates in writethrough
4942 * mode.
4944 * Let's hope the user knows what he's doing.
4946 ret = 0;
4948 if (ret < 0) {
4949 return ret;
4952 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4953 * in the case of cache=unsafe, so there are no useless flushes.
4955 flush_parent:
4956 return bdrv_co_flush(bs->file);
4959 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4961 Error *local_err = NULL;
4962 int ret;
4964 if (!bs->drv) {
4965 return;
4968 if (bs->drv->bdrv_invalidate_cache) {
4969 bs->drv->bdrv_invalidate_cache(bs, &local_err);
4970 } else if (bs->file) {
4971 bdrv_invalidate_cache(bs->file, &local_err);
4973 if (local_err) {
4974 error_propagate(errp, local_err);
4975 return;
4978 ret = refresh_total_sectors(bs, bs->total_sectors);
4979 if (ret < 0) {
4980 error_setg_errno(errp, -ret, "Could not refresh total sector count");
4981 return;
4985 void bdrv_invalidate_cache_all(Error **errp)
4987 BlockDriverState *bs;
4988 Error *local_err = NULL;
4990 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4991 AioContext *aio_context = bdrv_get_aio_context(bs);
4993 aio_context_acquire(aio_context);
4994 bdrv_invalidate_cache(bs, &local_err);
4995 aio_context_release(aio_context);
4996 if (local_err) {
4997 error_propagate(errp, local_err);
4998 return;
5003 void bdrv_clear_incoming_migration_all(void)
5005 BlockDriverState *bs;
5007 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5008 AioContext *aio_context = bdrv_get_aio_context(bs);
5010 aio_context_acquire(aio_context);
5011 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
5012 aio_context_release(aio_context);
5016 int bdrv_flush(BlockDriverState *bs)
5018 Coroutine *co;
5019 RwCo rwco = {
5020 .bs = bs,
5021 .ret = NOT_DONE,
5024 if (qemu_in_coroutine()) {
5025 /* Fast-path if already in coroutine context */
5026 bdrv_flush_co_entry(&rwco);
5027 } else {
5028 AioContext *aio_context = bdrv_get_aio_context(bs);
5030 co = qemu_coroutine_create(bdrv_flush_co_entry);
5031 qemu_coroutine_enter(co, &rwco);
5032 while (rwco.ret == NOT_DONE) {
5033 aio_poll(aio_context, true);
5037 return rwco.ret;
5040 typedef struct DiscardCo {
5041 BlockDriverState *bs;
5042 int64_t sector_num;
5043 int nb_sectors;
5044 int ret;
5045 } DiscardCo;
5046 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5048 DiscardCo *rwco = opaque;
5050 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5053 /* if no limit is specified in the BlockLimits use a default
5054 * of 32768 512-byte sectors (16 MiB) per request.
5056 #define MAX_DISCARD_DEFAULT 32768
5058 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5059 int nb_sectors)
5061 int max_discard;
5063 if (!bs->drv) {
5064 return -ENOMEDIUM;
5065 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5066 return -EIO;
5067 } else if (bs->read_only) {
5068 return -EROFS;
5071 bdrv_reset_dirty(bs, sector_num, nb_sectors);
5073 /* Do nothing if disabled. */
5074 if (!(bs->open_flags & BDRV_O_UNMAP)) {
5075 return 0;
5078 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5079 return 0;
5082 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5083 while (nb_sectors > 0) {
5084 int ret;
5085 int num = nb_sectors;
5087 /* align request */
5088 if (bs->bl.discard_alignment &&
5089 num >= bs->bl.discard_alignment &&
5090 sector_num % bs->bl.discard_alignment) {
5091 if (num > bs->bl.discard_alignment) {
5092 num = bs->bl.discard_alignment;
5094 num -= sector_num % bs->bl.discard_alignment;
5097 /* limit request size */
5098 if (num > max_discard) {
5099 num = max_discard;
5102 if (bs->drv->bdrv_co_discard) {
5103 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5104 } else {
5105 BlockDriverAIOCB *acb;
5106 CoroutineIOCompletion co = {
5107 .coroutine = qemu_coroutine_self(),
5110 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5111 bdrv_co_io_em_complete, &co);
5112 if (acb == NULL) {
5113 return -EIO;
5114 } else {
5115 qemu_coroutine_yield();
5116 ret = co.ret;
5119 if (ret && ret != -ENOTSUP) {
5120 return ret;
5123 sector_num += num;
5124 nb_sectors -= num;
5126 return 0;
5129 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5131 Coroutine *co;
5132 DiscardCo rwco = {
5133 .bs = bs,
5134 .sector_num = sector_num,
5135 .nb_sectors = nb_sectors,
5136 .ret = NOT_DONE,
5139 if (qemu_in_coroutine()) {
5140 /* Fast-path if already in coroutine context */
5141 bdrv_discard_co_entry(&rwco);
5142 } else {
5143 AioContext *aio_context = bdrv_get_aio_context(bs);
5145 co = qemu_coroutine_create(bdrv_discard_co_entry);
5146 qemu_coroutine_enter(co, &rwco);
5147 while (rwco.ret == NOT_DONE) {
5148 aio_poll(aio_context, true);
5152 return rwco.ret;
5155 /**************************************************************/
5156 /* removable device support */
5159 * Return TRUE if the media is present
5161 int bdrv_is_inserted(BlockDriverState *bs)
5163 BlockDriver *drv = bs->drv;
5165 if (!drv)
5166 return 0;
5167 if (!drv->bdrv_is_inserted)
5168 return 1;
5169 return drv->bdrv_is_inserted(bs);
5173 * Return whether the media changed since the last call to this
5174 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5176 int bdrv_media_changed(BlockDriverState *bs)
5178 BlockDriver *drv = bs->drv;
5180 if (drv && drv->bdrv_media_changed) {
5181 return drv->bdrv_media_changed(bs);
5183 return -ENOTSUP;
5187 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5189 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5191 BlockDriver *drv = bs->drv;
5193 if (drv && drv->bdrv_eject) {
5194 drv->bdrv_eject(bs, eject_flag);
5197 if (bs->device_name[0] != '\0') {
5198 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5199 eject_flag, &error_abort);
5204 * Lock or unlock the media (if it is locked, the user won't be able
5205 * to eject it manually).
5207 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5209 BlockDriver *drv = bs->drv;
5211 trace_bdrv_lock_medium(bs, locked);
5213 if (drv && drv->bdrv_lock_medium) {
5214 drv->bdrv_lock_medium(bs, locked);
5218 /* needed for generic scsi interface */
5220 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5222 BlockDriver *drv = bs->drv;
5224 if (drv && drv->bdrv_ioctl)
5225 return drv->bdrv_ioctl(bs, req, buf);
5226 return -ENOTSUP;
5229 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5230 unsigned long int req, void *buf,
5231 BlockDriverCompletionFunc *cb, void *opaque)
5233 BlockDriver *drv = bs->drv;
5235 if (drv && drv->bdrv_aio_ioctl)
5236 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5237 return NULL;
5240 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5242 bs->guest_block_size = align;
5245 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5247 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5251 * Check if all memory in this vector is sector aligned.
5253 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5255 int i;
5256 size_t alignment = bdrv_opt_mem_align(bs);
5258 for (i = 0; i < qiov->niov; i++) {
5259 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5260 return false;
5262 if (qiov->iov[i].iov_len % alignment) {
5263 return false;
5267 return true;
5270 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5271 Error **errp)
5273 int64_t bitmap_size;
5274 BdrvDirtyBitmap *bitmap;
5276 assert((granularity & (granularity - 1)) == 0);
5278 granularity >>= BDRV_SECTOR_BITS;
5279 assert(granularity);
5280 bitmap_size = bdrv_getlength(bs);
5281 if (bitmap_size < 0) {
5282 error_setg_errno(errp, -bitmap_size, "could not get length of device");
5283 errno = -bitmap_size;
5284 return NULL;
5286 bitmap_size >>= BDRV_SECTOR_BITS;
5287 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5288 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5289 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5290 return bitmap;
5293 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5295 BdrvDirtyBitmap *bm, *next;
5296 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5297 if (bm == bitmap) {
5298 QLIST_REMOVE(bitmap, list);
5299 hbitmap_free(bitmap->bitmap);
5300 g_free(bitmap);
5301 return;
5306 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5308 BdrvDirtyBitmap *bm;
5309 BlockDirtyInfoList *list = NULL;
5310 BlockDirtyInfoList **plist = &list;
5312 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5313 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5314 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5315 info->count = bdrv_get_dirty_count(bs, bm);
5316 info->granularity =
5317 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5318 entry->value = info;
5319 *plist = entry;
5320 plist = &entry->next;
5323 return list;
5326 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5328 if (bitmap) {
5329 return hbitmap_get(bitmap->bitmap, sector);
5330 } else {
5331 return 0;
5335 void bdrv_dirty_iter_init(BlockDriverState *bs,
5336 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5338 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5341 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5342 int nr_sectors)
5344 BdrvDirtyBitmap *bitmap;
5345 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5346 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5350 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5352 BdrvDirtyBitmap *bitmap;
5353 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5354 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5358 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5360 return hbitmap_count(bitmap->bitmap);
5363 /* Get a reference to bs */
5364 void bdrv_ref(BlockDriverState *bs)
5366 bs->refcnt++;
5369 /* Release a previously grabbed reference to bs.
5370 * If after releasing, reference count is zero, the BlockDriverState is
5371 * deleted. */
5372 void bdrv_unref(BlockDriverState *bs)
5374 assert(bs->refcnt > 0);
5375 if (--bs->refcnt == 0) {
5376 bdrv_delete(bs);
5380 struct BdrvOpBlocker {
5381 Error *reason;
5382 QLIST_ENTRY(BdrvOpBlocker) list;
5385 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5387 BdrvOpBlocker *blocker;
5388 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5389 if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5390 blocker = QLIST_FIRST(&bs->op_blockers[op]);
5391 if (errp) {
5392 error_setg(errp, "Device '%s' is busy: %s",
5393 bs->device_name, error_get_pretty(blocker->reason));
5395 return true;
5397 return false;
5400 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5402 BdrvOpBlocker *blocker;
5403 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5405 blocker = g_malloc0(sizeof(BdrvOpBlocker));
5406 blocker->reason = reason;
5407 QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5410 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5412 BdrvOpBlocker *blocker, *next;
5413 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5414 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5415 if (blocker->reason == reason) {
5416 QLIST_REMOVE(blocker, list);
5417 g_free(blocker);
5422 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5424 int i;
5425 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5426 bdrv_op_block(bs, i, reason);
5430 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5432 int i;
5433 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5434 bdrv_op_unblock(bs, i, reason);
5438 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5440 int i;
5442 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5443 if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5444 return false;
5447 return true;
5450 void bdrv_iostatus_enable(BlockDriverState *bs)
5452 bs->iostatus_enabled = true;
5453 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5456 /* The I/O status is only enabled if the drive explicitly
5457 * enables it _and_ the VM is configured to stop on errors */
5458 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5460 return (bs->iostatus_enabled &&
5461 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5462 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5463 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5466 void bdrv_iostatus_disable(BlockDriverState *bs)
5468 bs->iostatus_enabled = false;
5471 void bdrv_iostatus_reset(BlockDriverState *bs)
5473 if (bdrv_iostatus_is_enabled(bs)) {
5474 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5475 if (bs->job) {
5476 block_job_iostatus_reset(bs->job);
5481 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5483 assert(bdrv_iostatus_is_enabled(bs));
5484 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5485 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5486 BLOCK_DEVICE_IO_STATUS_FAILED;
5490 void
5491 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5492 enum BlockAcctType type)
5494 assert(type < BDRV_MAX_IOTYPE);
5496 cookie->bytes = bytes;
5497 cookie->start_time_ns = get_clock();
5498 cookie->type = type;
5501 void
5502 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5504 assert(cookie->type < BDRV_MAX_IOTYPE);
5506 bs->nr_bytes[cookie->type] += cookie->bytes;
5507 bs->nr_ops[cookie->type]++;
5508 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5511 void bdrv_img_create(const char *filename, const char *fmt,
5512 const char *base_filename, const char *base_fmt,
5513 char *options, uint64_t img_size, int flags,
5514 Error **errp, bool quiet)
5516 QemuOptsList *create_opts = NULL;
5517 QemuOpts *opts = NULL;
5518 const char *backing_fmt, *backing_file;
5519 int64_t size;
5520 BlockDriver *drv, *proto_drv;
5521 BlockDriver *backing_drv = NULL;
5522 Error *local_err = NULL;
5523 int ret = 0;
5525 /* Find driver and parse its options */
5526 drv = bdrv_find_format(fmt);
5527 if (!drv) {
5528 error_setg(errp, "Unknown file format '%s'", fmt);
5529 return;
5532 proto_drv = bdrv_find_protocol(filename, true);
5533 if (!proto_drv) {
5534 error_setg(errp, "Unknown protocol '%s'", filename);
5535 return;
5538 create_opts = qemu_opts_append(create_opts, drv->create_opts);
5539 create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5541 /* Create parameter list with default values */
5542 opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5543 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5545 /* Parse -o options */
5546 if (options) {
5547 if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5548 error_setg(errp, "Invalid options for file format '%s'", fmt);
5549 goto out;
5553 if (base_filename) {
5554 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5555 error_setg(errp, "Backing file not supported for file format '%s'",
5556 fmt);
5557 goto out;
5561 if (base_fmt) {
5562 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5563 error_setg(errp, "Backing file format not supported for file "
5564 "format '%s'", fmt);
5565 goto out;
5569 backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5570 if (backing_file) {
5571 if (!strcmp(filename, backing_file)) {
5572 error_setg(errp, "Error: Trying to create an image with the "
5573 "same filename as the backing file");
5574 goto out;
5578 backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5579 if (backing_fmt) {
5580 backing_drv = bdrv_find_format(backing_fmt);
5581 if (!backing_drv) {
5582 error_setg(errp, "Unknown backing file format '%s'",
5583 backing_fmt);
5584 goto out;
5588 // The size for the image must always be specified, with one exception:
5589 // If we are using a backing file, we can obtain the size from there
5590 size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5591 if (size == -1) {
5592 if (backing_file) {
5593 BlockDriverState *bs;
5594 uint64_t size;
5595 int back_flags;
5597 /* backing files always opened read-only */
5598 back_flags =
5599 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5601 bs = NULL;
5602 ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5603 backing_drv, &local_err);
5604 if (ret < 0) {
5605 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5606 backing_file,
5607 error_get_pretty(local_err));
5608 error_free(local_err);
5609 local_err = NULL;
5610 goto out;
5612 bdrv_get_geometry(bs, &size);
5613 size *= 512;
5615 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5617 bdrv_unref(bs);
5618 } else {
5619 error_setg(errp, "Image creation needs a size parameter");
5620 goto out;
5624 if (!quiet) {
5625 printf("Formatting '%s', fmt=%s ", filename, fmt);
5626 qemu_opts_print(opts);
5627 puts("");
5630 ret = bdrv_create(drv, filename, opts, &local_err);
5632 if (ret == -EFBIG) {
5633 /* This is generally a better message than whatever the driver would
5634 * deliver (especially because of the cluster_size_hint), since that
5635 * is most probably not much different from "image too large". */
5636 const char *cluster_size_hint = "";
5637 if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5638 cluster_size_hint = " (try using a larger cluster size)";
5640 error_setg(errp, "The image size is too large for file format '%s'"
5641 "%s", fmt, cluster_size_hint);
5642 error_free(local_err);
5643 local_err = NULL;
5646 out:
5647 qemu_opts_del(opts);
5648 qemu_opts_free(create_opts);
5649 if (local_err) {
5650 error_propagate(errp, local_err);
5654 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5656 return bs->aio_context;
5659 void bdrv_detach_aio_context(BlockDriverState *bs)
5661 if (!bs->drv) {
5662 return;
5665 if (bs->io_limits_enabled) {
5666 throttle_detach_aio_context(&bs->throttle_state);
5668 if (bs->drv->bdrv_detach_aio_context) {
5669 bs->drv->bdrv_detach_aio_context(bs);
5671 if (bs->file) {
5672 bdrv_detach_aio_context(bs->file);
5674 if (bs->backing_hd) {
5675 bdrv_detach_aio_context(bs->backing_hd);
5678 bs->aio_context = NULL;
5681 void bdrv_attach_aio_context(BlockDriverState *bs,
5682 AioContext *new_context)
5684 if (!bs->drv) {
5685 return;
5688 bs->aio_context = new_context;
5690 if (bs->backing_hd) {
5691 bdrv_attach_aio_context(bs->backing_hd, new_context);
5693 if (bs->file) {
5694 bdrv_attach_aio_context(bs->file, new_context);
5696 if (bs->drv->bdrv_attach_aio_context) {
5697 bs->drv->bdrv_attach_aio_context(bs, new_context);
5699 if (bs->io_limits_enabled) {
5700 throttle_attach_aio_context(&bs->throttle_state, new_context);
5704 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5706 bdrv_drain_all(); /* ensure there are no in-flight requests */
5708 bdrv_detach_aio_context(bs);
5710 /* This function executes in the old AioContext so acquire the new one in
5711 * case it runs in a different thread.
5713 aio_context_acquire(new_context);
5714 bdrv_attach_aio_context(bs, new_context);
5715 aio_context_release(new_context);
5718 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5719 NotifierWithReturn *notifier)
5721 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5724 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5726 if (!bs->drv->bdrv_amend_options) {
5727 return -ENOTSUP;
5729 return bs->drv->bdrv_amend_options(bs, opts);
5732 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5733 * of block filter and by bdrv_is_first_non_filter.
5734 * It is used to test if the given bs is the candidate or recurse more in the
5735 * node graph.
5737 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5738 BlockDriverState *candidate)
5740 /* return false if basic checks fails */
5741 if (!bs || !bs->drv) {
5742 return false;
5745 /* the code reached a non block filter driver -> check if the bs is
5746 * the same as the candidate. It's the recursion termination condition.
5748 if (!bs->drv->is_filter) {
5749 return bs == candidate;
5751 /* Down this path the driver is a block filter driver */
5753 /* If the block filter recursion method is defined use it to recurse down
5754 * the node graph.
5756 if (bs->drv->bdrv_recurse_is_first_non_filter) {
5757 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5760 /* the driver is a block filter but don't allow to recurse -> return false
5762 return false;
5765 /* This function checks if the candidate is the first non filter bs down it's
5766 * bs chain. Since we don't have pointers to parents it explore all bs chains
5767 * from the top. Some filters can choose not to pass down the recursion.
5769 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5771 BlockDriverState *bs;
5773 /* walk down the bs forest recursively */
5774 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5775 bool perm;
5777 /* try to recurse in this top level bs */
5778 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5780 /* candidate is the first non filter */
5781 if (perm) {
5782 return true;
5786 return false;
5789 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp)
5791 BlockDriverState *to_replace_bs = bdrv_find_node(node_name);
5792 if (!to_replace_bs) {
5793 error_setg(errp, "Node name '%s' not found", node_name);
5794 return NULL;
5797 if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) {
5798 return NULL;
5801 /* We don't want arbitrary node of the BDS chain to be replaced only the top
5802 * most non filter in order to prevent data corruption.
5803 * Another benefit is that this tests exclude backing files which are
5804 * blocked by the backing blockers.
5806 if (!bdrv_is_first_non_filter(to_replace_bs)) {
5807 error_setg(errp, "Only top most non filter can be replaced");
5808 return NULL;
5811 return to_replace_bs;
5814 void bdrv_io_plug(BlockDriverState *bs)
5816 BlockDriver *drv = bs->drv;
5817 if (drv && drv->bdrv_io_plug) {
5818 drv->bdrv_io_plug(bs);
5819 } else if (bs->file) {
5820 bdrv_io_plug(bs->file);
5824 void bdrv_io_unplug(BlockDriverState *bs)
5826 BlockDriver *drv = bs->drv;
5827 if (drv && drv->bdrv_io_unplug) {
5828 drv->bdrv_io_unplug(bs);
5829 } else if (bs->file) {
5830 bdrv_io_unplug(bs->file);
5834 void bdrv_flush_io_queue(BlockDriverState *bs)
5836 BlockDriver *drv = bs->drv;
5837 if (drv && drv->bdrv_flush_io_queue) {
5838 drv->bdrv_flush_io_queue(bs);
5839 } else if (bs->file) {
5840 bdrv_flush_io_queue(bs->file);