hw/cris/axis_dev88.c

   1 /*
   2  * QEMU model for the AXIS devboard 88.
   3  *
   4  * Copyright (c) 2009 Edgar E. Iglesias, Axis Communications AB.
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "qemu/osdep.h"
  26 #include "qemu/units.h"
  27 #include "qapi/error.h"
  28 #include "qemu-common.h"
  29 #include "cpu.h"
  30 #include "hw/sysbus.h"
  31 #include "net/net.h"
  32 #include "hw/block/flash.h"
  33 #include "hw/boards.h"
  34 #include "hw/cris/etraxfs.h"
  35 #include "hw/loader.h"
  36 #include "elf.h"
  37 #include "boot.h"
  38 #include "exec/address-spaces.h"
  39 #include "sysemu/qtest.h"
  40 #include "sysemu/sysemu.h"
  41
  42 #define D(x)
  43 #define DNAND(x)
  44
  45 struct nand_state_t
  46 {
  47     DeviceState *nand;
  48     MemoryRegion iomem;
  49     unsigned int rdy:1;
  50     unsigned int ale:1;
  51     unsigned int cle:1;
  52     unsigned int ce:1;
  53 };
  54
  55 static struct nand_state_t nand_state;
  56 static uint64_t nand_read(void *opaque, hwaddr addr, unsigned size)
  57 {
  58     struct nand_state_t *s = opaque;
  59     uint32_t r;
  60     int rdy;
  61
  62     r = nand_getio(s->nand);
  63     nand_getpins(s->nand, &rdy);
  64     s->rdy = rdy;
  65
  66     DNAND(printf("%s addr=%x r=%x\n", __func__, addr, r));
  67     return r;
  68 }
  69
  70 static void
  71 nand_write(void *opaque, hwaddr addr, uint64_t value,
  72            unsigned size)
  73 {
  74     struct nand_state_t *s = opaque;
  75     int rdy;
  76
  77     DNAND(printf("%s addr=%x v=%x\n", __func__, addr, (unsigned)value));
  78     nand_setpins(s->nand, s->cle, s->ale, s->ce, 1, 0);
  79     nand_setio(s->nand, value);
  80     nand_getpins(s->nand, &rdy);
  81     s->rdy = rdy;
  82 }
  83
  84 static const MemoryRegionOps nand_ops = {
  85     .read = nand_read,
  86     .write = nand_write,
  87     .endianness = DEVICE_NATIVE_ENDIAN,
  88 };
  89
  90 struct tempsensor_t
  91 {
  92     unsigned int shiftreg;
  93     unsigned int count;
  94     enum {
  95         ST_OUT, ST_IN, ST_Z
  96     } state;
  97
  98     uint16_t regs[3];
  99 };
 100
 101 static void tempsensor_clkedge(struct tempsensor_t *s,
 102                                unsigned int clk, unsigned int data_in)
 103 {
 104     D(printf("%s clk=%d state=%d sr=%x\n", __func__,
 105              clk, s->state, s->shiftreg));
 106     if (s->count == 0) {
 107         s->count = 16;
 108         s->state = ST_OUT;
 109     }
 110     switch (s->state) {
 111         case ST_OUT:
 112             /* Output reg is clocked at negedge.  */
 113             if (!clk) {
 114                 s->count--;
 115                 s->shiftreg <<= 1;
 116                 if (s->count == 0) {
 117                     s->shiftreg = 0;
 118                     s->state = ST_IN;
 119                     s->count = 16;
 120                 }
 121             }
 122             break;
 123         case ST_Z:
 124             if (clk) {
 125                 s->count--;
 126                 if (s->count == 0) {
 127                     s->shiftreg = 0;
 128                     s->state = ST_OUT;
 129                     s->count = 16;
 130                 }
 131             }
 132             break;
 133         case ST_IN:
 134             /* Indata is sampled at posedge.  */
 135             if (clk) {
 136                 s->count--;
 137                 s->shiftreg <<= 1;
 138                 s->shiftreg |= data_in & 1;
 139                 if (s->count == 0) {
 140                     D(printf("%s cfgreg=%x\n", __func__, s->shiftreg));
 141                     s->regs[0] = s->shiftreg;
 142                     s->state = ST_OUT;
 143                     s->count = 16;
 144
 145                     if ((s->regs[0] & 0xff) == 0) {
 146                         /* 25 degrees celsius.  */
 147                         s->shiftreg = 0x0b9f;
 148                     } else if ((s->regs[0] & 0xff) == 0xff) {
 149                         /* Sensor ID, 0x8100 LM70.  */
 150                         s->shiftreg = 0x8100;
 151                     } else
 152                         printf("Invalid tempsens state %x\n", s->regs[0]);
 153                 }
 154             }
 155             break;
 156     }
 157 }
 158
 159
 160 #define RW_PA_DOUT    0x00
 161 #define R_PA_DIN      0x01
 162 #define RW_PA_OE      0x02
 163 #define RW_PD_DOUT    0x10
 164 #define R_PD_DIN      0x11
 165 #define RW_PD_OE      0x12
 166
 167 static struct gpio_state_t
 168 {
 169     MemoryRegion iomem;
 170     struct nand_state_t *nand;
 171     struct tempsensor_t tempsensor;
 172     uint32_t regs[0x5c / 4];
 173 } gpio_state;
 174
 175 static uint64_t gpio_read(void *opaque, hwaddr addr, unsigned size)
 176 {
 177     struct gpio_state_t *s = opaque;
 178     uint32_t r = 0;
 179
 180     addr >>= 2;
 181     switch (addr)
 182     {
 183         case R_PA_DIN:
 184             r = s->regs[RW_PA_DOUT] & s->regs[RW_PA_OE];
 185
 186             /* Encode pins from the nand.  */
 187             r |= s->nand->rdy << 7;
 188             break;
 189         case R_PD_DIN:
 190             r = s->regs[RW_PD_DOUT] & s->regs[RW_PD_OE];
 191
 192             /* Encode temp sensor pins.  */
 193             r |= (!!(s->tempsensor.shiftreg & 0x10000)) << 4;
 194             break;
 195
 196         default:
 197             r = s->regs[addr];
 198             break;
 199     }
 200     return r;
 201     D(printf("%s %x=%x\n", __func__, addr, r));
 202 }
 203
 204 static void gpio_write(void *opaque, hwaddr addr, uint64_t value,
 205                        unsigned size)
 206 {
 207     struct gpio_state_t *s = opaque;
 208     D(printf("%s %x=%x\n", __func__, addr, (unsigned)value));
 209
 210     addr >>= 2;
 211     switch (addr)
 212     {
 213         case RW_PA_DOUT:
 214             /* Decode nand pins.  */
 215             s->nand->ale = !!(value & (1 << 6));
 216             s->nand->cle = !!(value & (1 << 5));
 217             s->nand->ce  = !!(value & (1 << 4));
 218
 219             s->regs[addr] = value;
 220             break;
 221
 222         case RW_PD_DOUT:
 223             /* Temp sensor clk.  */
 224             if ((s->regs[addr] ^ value) & 2)
 225                 tempsensor_clkedge(&s->tempsensor, !!(value & 2),
 226                                    !!(value & 16));
 227             s->regs[addr] = value;
 228             break;
 229
 230         default:
 231             s->regs[addr] = value;
 232             break;
 233     }
 234 }
 235
 236 static const MemoryRegionOps gpio_ops = {
 237     .read = gpio_read,
 238     .write = gpio_write,
 239     .endianness = DEVICE_NATIVE_ENDIAN,
 240     .valid = {
 241         .min_access_size = 4,
 242         .max_access_size = 4,
 243     },
 244 };
 245
 246 #define INTMEM_SIZE (128 * KiB)
 247
 248 static struct cris_load_info li;
 249
 250 static
 251 void axisdev88_init(MachineState *machine)
 252 {
 253     ram_addr_t ram_size = machine->ram_size;
 254     const char *kernel_filename = machine->kernel_filename;
 255     const char *kernel_cmdline = machine->kernel_cmdline;
 256     CRISCPU *cpu;
 257     CPUCRISState *env;
 258     DeviceState *dev;
 259     SysBusDevice *s;
 260     DriveInfo *nand;
 261     qemu_irq irq[30], nmi[2];
 262     void *etraxfs_dmac;
 263     struct etraxfs_dma_client *dma_eth;
 264     int i;
 265     MemoryRegion *address_space_mem = get_system_memory();
 266     MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
 267     MemoryRegion *phys_intmem = g_new(MemoryRegion, 1);
 268
 269     /* init CPUs */
 270     cpu = CRIS_CPU(cpu_create(machine->cpu_type));
 271     env = &cpu->env;
 272
 273     /* allocate RAM */
 274     memory_region_allocate_system_memory(phys_ram, NULL, "axisdev88.ram",
 275                                          ram_size);
 276     memory_region_add_subregion(address_space_mem, 0x40000000, phys_ram);
 277
 278     /* The ETRAX-FS has 128Kb on chip ram, the docs refer to it as the
 279        internal memory.  */
 280     memory_region_init_ram(phys_intmem, NULL, "axisdev88.chipram",
 281                            INTMEM_SIZE, &error_fatal);
 282     memory_region_add_subregion(address_space_mem, 0x38000000, phys_intmem);
 283
 284       /* Attach a NAND flash to CS1.  */
 285     nand = drive_get(IF_MTD, 0, 0);
 286     nand_state.nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL,
 287                                 NAND_MFR_STMICRO, 0x39);
 288     memory_region_init_io(&nand_state.iomem, NULL, &nand_ops, &nand_state,
 289                           "nand", 0x05000000);
 290     memory_region_add_subregion(address_space_mem, 0x10000000,
 291                                 &nand_state.iomem);
 292
 293     gpio_state.nand = &nand_state;
 294     memory_region_init_io(&gpio_state.iomem, NULL, &gpio_ops, &gpio_state,
 295                           "gpio", 0x5c);
 296     memory_region_add_subregion(address_space_mem, 0x3001a000,
 297                                 &gpio_state.iomem);
 298
 299
 300     dev = qdev_create(NULL, "etraxfs,pic");
 301     /* FIXME: Is there a proper way to signal vectors to the CPU core?  */
 302     qdev_prop_set_ptr(dev, "interrupt_vector", &env->interrupt_vector);
 303     qdev_init_nofail(dev);
 304     s = SYS_BUS_DEVICE(dev);
 305     sysbus_mmio_map(s, 0, 0x3001c000);
 306     sysbus_connect_irq(s, 0, qdev_get_gpio_in(DEVICE(cpu), CRIS_CPU_IRQ));
 307     sysbus_connect_irq(s, 1, qdev_get_gpio_in(DEVICE(cpu), CRIS_CPU_NMI));
 308     for (i = 0; i < 30; i++) {
 309         irq[i] = qdev_get_gpio_in(dev, i);
 310     }
 311     nmi[0] = qdev_get_gpio_in(dev, 30);
 312     nmi[1] = qdev_get_gpio_in(dev, 31);
 313
 314     etraxfs_dmac = etraxfs_dmac_init(0x30000000, 10);
 315     for (i = 0; i < 10; i++) {
 316         /* On ETRAX, odd numbered channels are inputs.  */
 317         etraxfs_dmac_connect(etraxfs_dmac, i, irq + 7 + i, i & 1);
 318     }
 319
 320     /* Add the two ethernet blocks.  */
 321     dma_eth = g_malloc0(sizeof dma_eth[0] * 4); /* Allocate 4 channels.  */
 322     etraxfs_eth_init(&nd_table[0], 0x30034000, 1, &dma_eth[0], &dma_eth[1]);
 323     if (nb_nics > 1) {
 324         etraxfs_eth_init(&nd_table[1], 0x30036000, 2, &dma_eth[2], &dma_eth[3]);
 325     }
 326
 327     /* The DMA Connector block is missing, hardwire things for now.  */
 328     etraxfs_dmac_connect_client(etraxfs_dmac, 0, &dma_eth[0]);
 329     etraxfs_dmac_connect_client(etraxfs_dmac, 1, &dma_eth[1]);
 330     if (nb_nics > 1) {
 331         etraxfs_dmac_connect_client(etraxfs_dmac, 6, &dma_eth[2]);
 332         etraxfs_dmac_connect_client(etraxfs_dmac, 7, &dma_eth[3]);
 333     }
 334
 335     /* 2 timers.  */
 336     sysbus_create_varargs("etraxfs,timer", 0x3001e000, irq[0x1b], nmi[1], NULL);
 337     sysbus_create_varargs("etraxfs,timer", 0x3005e000, irq[0x1b], nmi[1], NULL);
 338
 339     for (i = 0; i < 4; i++) {
 340         etraxfs_ser_create(0x30026000 + i * 0x2000, irq[0x14 + i], serial_hd(i));
 341     }
 342
 343     if (kernel_filename) {
 344         li.image_filename = kernel_filename;
 345         li.cmdline = kernel_cmdline;
 346         cris_load_image(cpu, &li);
 347     } else if (!qtest_enabled()) {
 348         fprintf(stderr, "Kernel image must be specified\n");
 349         exit(1);
 350     }
 351 }
 352
 353 static void axisdev88_machine_init(MachineClass *mc)
 354 {
 355     mc->desc = "AXIS devboard 88";
 356     mc->init = axisdev88_init;
 357     mc->is_default = 1;
 358     mc->default_cpu_type = CRIS_CPU_TYPE_NAME("crisv32");
 359 }
 360
 361 DEFINE_MACHINE("axis-dev88", axisdev88_machine_init)