qmp-commands.hx

   1 HXCOMM QMP dispatch table and documentation
   2 HXCOMM Text between SQMP and EQMP is copied to the QMP documentation file and
   3 HXCOMM does not show up in the other formats.
   4
   5 SQMP
   6                         QMP Supported Commands
   7                         ----------------------
   8
   9 This document describes all commands currently supported by QMP.
  10
  11 Most of the time their usage is exactly the same as in the user Monitor, this
  12 means that any other document which also describe commands (the manpage,
  13 QEMU's manual, etc) can and should be consulted.
  14
  15 QMP has two types of commands: regular and query commands. Regular commands
  16 usually change the Virtual Machine's state someway, while query commands just
  17 return information. The sections below are divided accordingly.
  18
  19 It's important to observe that all communication examples are formatted in
  20 a reader-friendly way, so that they're easier to understand. However, in real
  21 protocol usage, they're emitted as a single line.
  22
  23 Also, the following notation is used to denote data flow:
  24
  25 -> data issued by the Client
  26 <- Server data response
  27
  28 Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed
  29 information on the Server command and response formats.
  30
  31 NOTE: This document is temporary and will be replaced soon.
  32
  33 1. Stability Considerations
  34 ===========================
  35
  36 The current QMP command set (described in this file) may be useful for a
  37 number of use cases, however it's limited and several commands have bad
  38 defined semantics, specially with regard to command completion.
  39
  40 These problems are going to be solved incrementally in the next QEMU releases
  41 and we're going to establish a deprecation policy for badly defined commands.
  42
  43 If you're planning to adopt QMP, please observe the following:
  44
  45     1. The deprecation policy will take effect and be documented soon, please
  46        check the documentation of each used command as soon as a new release of
  47        QEMU is available
  48
  49     2. DO NOT rely on anything which is not explicit documented
  50
  51     3. Errors, in special, are not documented. Applications should NOT check
  52        for specific errors classes or data (it's strongly recommended to only
  53        check for the "error" key)
  54
  55 2. Regular Commands
  56 ===================
  57
  58 Server's responses in the examples below are always a success response, please
  59 refer to the QMP specification for more details on error responses.
  60
  61 EQMP
  62
  63     {
  64         .name       = "quit",
  65         .args_type  = "",
  66         .mhandler.cmd_new = qmp_marshal_quit,
  67     },
  68
  69 SQMP
  70 quit
  71 ----
  72
  73 Quit the emulator.
  74
  75 Arguments: None.
  76
  77 Example:
  78
  79 -> { "execute": "quit" }
  80 <- { "return": {} }
  81
  82 EQMP
  83
  84     {
  85         .name       = "eject",
  86         .args_type  = "force:-f,device:B",
  87         .mhandler.cmd_new = qmp_marshal_eject,
  88     },
  89
  90 SQMP
  91 eject
  92 -----
  93
  94 Eject a removable medium.
  95
  96 Arguments:
  97
  98 - force: force ejection (json-bool, optional)
  99 - device: device name (json-string)
 100
 101 Example:
 102
 103 -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } }
 104 <- { "return": {} }
 105
 106 Note: The "force" argument defaults to false.
 107
 108 EQMP
 109
 110     {
 111         .name       = "change",
 112         .args_type  = "device:B,target:F,arg:s?",
 113         .mhandler.cmd_new = qmp_marshal_change,
 114     },
 115
 116 SQMP
 117 change
 118 ------
 119
 120 Change a removable medium or VNC configuration.
 121
 122 Arguments:
 123
 124 - "device": device name (json-string)
 125 - "target": filename or item (json-string)
 126 - "arg": additional argument (json-string, optional)
 127
 128 Examples:
 129
 130 1. Change a removable medium
 131
 132 -> { "execute": "change",
 133              "arguments": { "device": "ide1-cd0",
 134                             "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
 135 <- { "return": {} }
 136
 137 2. Change VNC password
 138
 139 -> { "execute": "change",
 140              "arguments": { "device": "vnc", "target": "password",
 141                             "arg": "foobar1" } }
 142 <- { "return": {} }
 143
 144 EQMP
 145
 146     {
 147         .name       = "screendump",
 148         .args_type  = "filename:F",
 149         .mhandler.cmd_new = qmp_marshal_screendump,
 150     },
 151
 152 SQMP
 153 screendump
 154 ----------
 155
 156 Save screen into PPM image.
 157
 158 Arguments:
 159
 160 - "filename": file path (json-string)
 161
 162 Example:
 163
 164 -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
 165 <- { "return": {} }
 166
 167 EQMP
 168
 169     {
 170         .name       = "stop",
 171         .args_type  = "",
 172         .mhandler.cmd_new = qmp_marshal_stop,
 173     },
 174
 175 SQMP
 176 stop
 177 ----
 178
 179 Stop the emulator.
 180
 181 Arguments: None.
 182
 183 Example:
 184
 185 -> { "execute": "stop" }
 186 <- { "return": {} }
 187
 188 EQMP
 189
 190     {
 191         .name       = "cont",
 192         .args_type  = "",
 193         .mhandler.cmd_new = qmp_marshal_cont,
 194     },
 195
 196 SQMP
 197 cont
 198 ----
 199
 200 Resume emulation.
 201
 202 Arguments: None.
 203
 204 Example:
 205
 206 -> { "execute": "cont" }
 207 <- { "return": {} }
 208
 209 EQMP
 210
 211     {
 212         .name       = "system_wakeup",
 213         .args_type  = "",
 214         .mhandler.cmd_new = qmp_marshal_system_wakeup,
 215     },
 216
 217 SQMP
 218 system_wakeup
 219 -------------
 220
 221 Wakeup guest from suspend.
 222
 223 Arguments: None.
 224
 225 Example:
 226
 227 -> { "execute": "system_wakeup" }
 228 <- { "return": {} }
 229
 230 EQMP
 231
 232     {
 233         .name       = "system_reset",
 234         .args_type  = "",
 235         .mhandler.cmd_new = qmp_marshal_system_reset,
 236     },
 237
 238 SQMP
 239 system_reset
 240 ------------
 241
 242 Reset the system.
 243
 244 Arguments: None.
 245
 246 Example:
 247
 248 -> { "execute": "system_reset" }
 249 <- { "return": {} }
 250
 251 EQMP
 252
 253     {
 254         .name       = "system_powerdown",
 255         .args_type  = "",
 256         .mhandler.cmd_new = qmp_marshal_system_powerdown,
 257     },
 258
 259 SQMP
 260 system_powerdown
 261 ----------------
 262
 263 Send system power down event.
 264
 265 Arguments: None.
 266
 267 Example:
 268
 269 -> { "execute": "system_powerdown" }
 270 <- { "return": {} }
 271
 272 EQMP
 273
 274     {
 275         .name       = "device_add",
 276         .args_type  = "device:O",
 277         .params     = "driver[,prop=value][,...]",
 278         .help       = "add device, like -device on the command line",
 279         .mhandler.cmd_new = qmp_device_add,
 280     },
 281
 282 SQMP
 283 device_add
 284 ----------
 285
 286 Add a device.
 287
 288 Arguments:
 289
 290 - "driver": the name of the new device's driver (json-string)
 291 - "bus": the device's parent bus (device tree path, json-string, optional)
 292 - "id": the device's ID, must be unique (json-string)
 293 - device properties
 294
 295 Example:
 296
 297 -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } }
 298 <- { "return": {} }
 299
 300 Notes:
 301
 302 (1) For detailed information about this command, please refer to the
 303     'docs/qdev-device-use.txt' file.
 304
 305 (2) It's possible to list device properties by running QEMU with the
 306     "-device DEVICE,\?" command-line argument, where DEVICE is the device's name
 307
 308 EQMP
 309
 310     {
 311         .name       = "device_del",
 312         .args_type  = "id:s",
 313         .mhandler.cmd_new = qmp_marshal_device_del,
 314     },
 315
 316 SQMP
 317 device_del
 318 ----------
 319
 320 Remove a device.
 321
 322 Arguments:
 323
 324 - "id": the device's ID or QOM path (json-string)
 325
 326 Example:
 327
 328 -> { "execute": "device_del", "arguments": { "id": "net1" } }
 329 <- { "return": {} }
 330
 331 Example:
 332
 333 -> { "execute": "device_del", "arguments": { "id": "/machine/peripheral-anon/device[0]" } }
 334 <- { "return": {} }
 335
 336 EQMP
 337
 338     {
 339         .name       = "send-key",
 340         .args_type  = "keys:q,hold-time:i?",
 341         .mhandler.cmd_new = qmp_marshal_send_key,
 342     },
 343
 344 SQMP
 345 send-key
 346 ----------
 347
 348 Send keys to VM.
 349
 350 Arguments:
 351
 352 keys array:
 353     - "key": key sequence (a json-array of key union values,
 354              union can be number or qcode enum)
 355
 356 - hold-time: time to delay key up events, milliseconds. Defaults to 100
 357              (json-int, optional)
 358
 359 Example:
 360
 361 -> { "execute": "send-key",
 362      "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
 363                               { "type": "qcode", "data": "alt" },
 364                               { "type": "qcode", "data": "delete" } ] } }
 365 <- { "return": {} }
 366
 367 EQMP
 368
 369     {
 370         .name       = "cpu",
 371         .args_type  = "index:i",
 372         .mhandler.cmd_new = qmp_marshal_cpu,
 373     },
 374
 375 SQMP
 376 cpu
 377 ---
 378
 379 Set the default CPU.
 380
 381 Arguments:
 382
 383 - "index": the CPU's index (json-int)
 384
 385 Example:
 386
 387 -> { "execute": "cpu", "arguments": { "index": 0 } }
 388 <- { "return": {} }
 389
 390 Note: CPUs' indexes are obtained with the 'query-cpus' command.
 391
 392 EQMP
 393
 394     {
 395         .name       = "cpu-add",
 396         .args_type  = "id:i",
 397         .mhandler.cmd_new = qmp_marshal_cpu_add,
 398     },
 399
 400 SQMP
 401 cpu-add
 402 -------
 403
 404 Adds virtual cpu
 405
 406 Arguments:
 407
 408 - "id": cpu id (json-int)
 409
 410 Example:
 411
 412 -> { "execute": "cpu-add", "arguments": { "id": 2 } }
 413 <- { "return": {} }
 414
 415 EQMP
 416
 417     {
 418         .name       = "memsave",
 419         .args_type  = "val:l,size:i,filename:s,cpu:i?",
 420         .mhandler.cmd_new = qmp_marshal_memsave,
 421     },
 422
 423 SQMP
 424 memsave
 425 -------
 426
 427 Save to disk virtual memory dump starting at 'val' of size 'size'.
 428
 429 Arguments:
 430
 431 - "val": the starting address (json-int)
 432 - "size": the memory size, in bytes (json-int)
 433 - "filename": file path (json-string)
 434 - "cpu": virtual CPU index (json-int, optional)
 435
 436 Example:
 437
 438 -> { "execute": "memsave",
 439              "arguments": { "val": 10,
 440                             "size": 100,
 441                             "filename": "/tmp/virtual-mem-dump" } }
 442 <- { "return": {} }
 443
 444 EQMP
 445
 446     {
 447         .name       = "pmemsave",
 448         .args_type  = "val:l,size:i,filename:s",
 449         .mhandler.cmd_new = qmp_marshal_pmemsave,
 450     },
 451
 452 SQMP
 453 pmemsave
 454 --------
 455
 456 Save to disk physical memory dump starting at 'val' of size 'size'.
 457
 458 Arguments:
 459
 460 - "val": the starting address (json-int)
 461 - "size": the memory size, in bytes (json-int)
 462 - "filename": file path (json-string)
 463
 464 Example:
 465
 466 -> { "execute": "pmemsave",
 467              "arguments": { "val": 10,
 468                             "size": 100,
 469                             "filename": "/tmp/physical-mem-dump" } }
 470 <- { "return": {} }
 471
 472 EQMP
 473
 474     {
 475         .name       = "inject-nmi",
 476         .args_type  = "",
 477         .mhandler.cmd_new = qmp_marshal_inject_nmi,
 478     },
 479
 480 SQMP
 481 inject-nmi
 482 ----------
 483
 484 Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64).
 485
 486 Arguments: None.
 487
 488 Example:
 489
 490 -> { "execute": "inject-nmi" }
 491 <- { "return": {} }
 492
 493 Note: inject-nmi fails when the guest doesn't support injecting.
 494
 495 EQMP
 496
 497     {
 498         .name       = "ringbuf-write",
 499         .args_type  = "device:s,data:s,format:s?",
 500         .mhandler.cmd_new = qmp_marshal_ringbuf_write,
 501     },
 502
 503 SQMP
 504 ringbuf-write
 505 -------------
 506
 507 Write to a ring buffer character device.
 508
 509 Arguments:
 510
 511 - "device": ring buffer character device name (json-string)
 512 - "data": data to write (json-string)
 513 - "format": data format (json-string, optional)
 514           - Possible values: "utf8" (default), "base64"
 515
 516 Example:
 517
 518 -> { "execute": "ringbuf-write",
 519                 "arguments": { "device": "foo",
 520                                "data": "abcdefgh",
 521                                "format": "utf8" } }
 522 <- { "return": {} }
 523
 524 EQMP
 525
 526     {
 527         .name       = "ringbuf-read",
 528         .args_type  = "device:s,size:i,format:s?",
 529         .mhandler.cmd_new = qmp_marshal_ringbuf_read,
 530     },
 531
 532 SQMP
 533 ringbuf-read
 534 -------------
 535
 536 Read from a ring buffer character device.
 537
 538 Arguments:
 539
 540 - "device": ring buffer character device name (json-string)
 541 - "size": how many bytes to read at most (json-int)
 542           - Number of data bytes, not number of characters in encoded data
 543 - "format": data format (json-string, optional)
 544           - Possible values: "utf8" (default), "base64"
 545           - Naturally, format "utf8" works only when the ring buffer
 546             contains valid UTF-8 text.  Invalid UTF-8 sequences get
 547             replaced.  Bug: replacement doesn't work.  Bug: can screw
 548             up on encountering NUL characters, after the ring buffer
 549             lost data, and when reading stops because the size limit
 550             is reached.
 551
 552 Example:
 553
 554 -> { "execute": "ringbuf-read",
 555                 "arguments": { "device": "foo",
 556                                "size": 1000,
 557                                "format": "utf8" } }
 558 <- {"return": "abcdefgh"}
 559
 560 EQMP
 561
 562     {
 563         .name       = "xen-save-devices-state",
 564         .args_type  = "filename:F",
 565     .mhandler.cmd_new = qmp_marshal_xen_save_devices_state,
 566     },
 567
 568 SQMP
 569 xen-save-devices-state
 570 -------
 571
 572 Save the state of all devices to file. The RAM and the block devices
 573 of the VM are not saved by this command.
 574
 575 Arguments:
 576
 577 - "filename": the file to save the state of the devices to as binary
 578 data. See xen-save-devices-state.txt for a description of the binary
 579 format.
 580
 581 Example:
 582
 583 -> { "execute": "xen-save-devices-state",
 584      "arguments": { "filename": "/tmp/save" } }
 585 <- { "return": {} }
 586
 587 EQMP
 588
 589     {
 590         .name       = "xen-load-devices-state",
 591         .args_type  = "filename:F",
 592         .mhandler.cmd_new = qmp_marshal_xen_load_devices_state,
 593     },
 594
 595 SQMP
 596 xen-load-devices-state
 597 ----------------------
 598
 599 Load the state of all devices from file. The RAM and the block devices
 600 of the VM are not loaded by this command.
 601
 602 Arguments:
 603
 604 - "filename": the file to load the state of the devices from as binary
 605 data. See xen-save-devices-state.txt for a description of the binary
 606 format.
 607
 608 Example:
 609
 610 -> { "execute": "xen-load-devices-state",
 611      "arguments": { "filename": "/tmp/resume" } }
 612 <- { "return": {} }
 613
 614 EQMP
 615
 616     {
 617         .name       = "xen-set-global-dirty-log",
 618         .args_type  = "enable:b",
 619         .mhandler.cmd_new = qmp_marshal_xen_set_global_dirty_log,
 620     },
 621
 622 SQMP
 623 xen-set-global-dirty-log
 624 -------
 625
 626 Enable or disable the global dirty log mode.
 627
 628 Arguments:
 629
 630 - "enable": Enable it or disable it.
 631
 632 Example:
 633
 634 -> { "execute": "xen-set-global-dirty-log",
 635      "arguments": { "enable": true } }
 636 <- { "return": {} }
 637
 638 EQMP
 639
 640     {
 641         .name       = "migrate",
 642         .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",
 643         .mhandler.cmd_new = qmp_marshal_migrate,
 644     },
 645
 646 SQMP
 647 migrate
 648 -------
 649
 650 Migrate to URI.
 651
 652 Arguments:
 653
 654 - "blk": block migration, full disk copy (json-bool, optional)
 655 - "inc": incremental disk copy (json-bool, optional)
 656 - "uri": Destination URI (json-string)
 657
 658 Example:
 659
 660 -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
 661 <- { "return": {} }
 662
 663 Notes:
 664
 665 (1) The 'query-migrate' command should be used to check migration's progress
 666     and final result (this information is provided by the 'status' member)
 667 (2) All boolean arguments default to false
 668 (3) The user Monitor's "detach" argument is invalid in QMP and should not
 669     be used
 670
 671 EQMP
 672
 673     {
 674         .name       = "migrate_cancel",
 675         .args_type  = "",
 676         .mhandler.cmd_new = qmp_marshal_migrate_cancel,
 677     },
 678
 679 SQMP
 680 migrate_cancel
 681 --------------
 682
 683 Cancel the current migration.
 684
 685 Arguments: None.
 686
 687 Example:
 688
 689 -> { "execute": "migrate_cancel" }
 690 <- { "return": {} }
 691
 692 EQMP
 693
 694     {
 695         .name       = "migrate-incoming",
 696         .args_type  = "uri:s",
 697         .mhandler.cmd_new = qmp_marshal_migrate_incoming,
 698     },
 699
 700 SQMP
 701 migrate-incoming
 702 ----------------
 703
 704 Continue an incoming migration
 705
 706 Arguments:
 707
 708 - "uri": Source/listening URI (json-string)
 709
 710 Example:
 711
 712 -> { "execute": "migrate-incoming", "arguments": { "uri": "tcp::4446" } }
 713 <- { "return": {} }
 714
 715 Notes:
 716
 717 (1) QEMU must be started with -incoming defer to allow migrate-incoming to
 718     be used
 719 (2) The uri format is the same as for -incoming
 720
 721 EQMP
 722     {
 723         .name       = "migrate-set-cache-size",
 724         .args_type  = "value:o",
 725         .mhandler.cmd_new = qmp_marshal_migrate_set_cache_size,
 726     },
 727
 728 SQMP
 729 migrate-set-cache-size
 730 ----------------------
 731
 732 Set cache size to be used by XBZRLE migration, the cache size will be rounded
 733 down to the nearest power of 2
 734
 735 Arguments:
 736
 737 - "value": cache size in bytes (json-int)
 738
 739 Example:
 740
 741 -> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } }
 742 <- { "return": {} }
 743
 744 EQMP
 745     {
 746         .name       = "migrate-start-postcopy",
 747         .args_type  = "",
 748         .mhandler.cmd_new = qmp_marshal_migrate_start_postcopy,
 749     },
 750
 751 SQMP
 752 migrate-start-postcopy
 753 ----------------------
 754
 755 Switch an in-progress migration to postcopy mode. Ignored after the end of
 756 migration (or once already in postcopy).
 757
 758 Example:
 759 -> { "execute": "migrate-start-postcopy" }
 760 <- { "return": {} }
 761
 762 EQMP
 763
 764     {
 765         .name       = "query-migrate-cache-size",
 766         .args_type  = "",
 767         .mhandler.cmd_new = qmp_marshal_query_migrate_cache_size,
 768     },
 769
 770 SQMP
 771 query-migrate-cache-size
 772 ------------------------
 773
 774 Show cache size to be used by XBZRLE migration
 775
 776 returns a json-object with the following information:
 777 - "size" : json-int
 778
 779 Example:
 780
 781 -> { "execute": "query-migrate-cache-size" }
 782 <- { "return": 67108864 }
 783
 784 EQMP
 785
 786     {
 787         .name       = "migrate_set_speed",
 788         .args_type  = "value:o",
 789         .mhandler.cmd_new = qmp_marshal_migrate_set_speed,
 790     },
 791
 792 SQMP
 793 migrate_set_speed
 794 -----------------
 795
 796 Set maximum speed for migrations.
 797
 798 Arguments:
 799
 800 - "value": maximum speed, in bytes per second (json-int)
 801
 802 Example:
 803
 804 -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
 805 <- { "return": {} }
 806
 807 EQMP
 808
 809     {
 810         .name       = "migrate_set_downtime",
 811         .args_type  = "value:T",
 812         .mhandler.cmd_new = qmp_marshal_migrate_set_downtime,
 813     },
 814
 815 SQMP
 816 migrate_set_downtime
 817 --------------------
 818
 819 Set maximum tolerated downtime (in seconds) for migrations.
 820
 821 Arguments:
 822
 823 - "value": maximum downtime (json-number)
 824
 825 Example:
 826
 827 -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
 828 <- { "return": {} }
 829
 830 EQMP
 831
 832     {
 833         .name       = "client_migrate_info",
 834         .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
 835         .params     = "protocol hostname port tls-port cert-subject",
 836         .help       = "set migration information for remote display",
 837         .mhandler.cmd_new = qmp_marshal_client_migrate_info,
 838     },
 839
 840 SQMP
 841 client_migrate_info
 842 -------------------
 843
 844 Set migration information for remote display.  This makes the server
 845 ask the client to automatically reconnect using the new parameters
 846 once migration finished successfully.  Only implemented for SPICE.
 847
 848 Arguments:
 849
 850 - "protocol":     must be "spice" (json-string)
 851 - "hostname":     migration target hostname (json-string)
 852 - "port":         spice tcp port for plaintext channels (json-int, optional)
 853 - "tls-port":     spice tcp port for tls-secured channels (json-int, optional)
 854 - "cert-subject": server certificate subject (json-string, optional)
 855
 856 Example:
 857
 858 -> { "execute": "client_migrate_info",
 859      "arguments": { "protocol": "spice",
 860                     "hostname": "virt42.lab.kraxel.org",
 861                     "port": 1234 } }
 862 <- { "return": {} }
 863
 864 EQMP
 865
 866     {
 867         .name       = "dump-guest-memory",
 868         .args_type  = "paging:b,protocol:s,detach:b?,begin:i?,end:i?,format:s?",
 869         .params     = "-p protocol [-d] [begin] [length] [format]",
 870         .help       = "dump guest memory to file",
 871         .mhandler.cmd_new = qmp_marshal_dump_guest_memory,
 872     },
 873
 874 SQMP
 875 dump
 876
 877
 878 Dump guest memory to file. The file can be processed with crash or gdb.
 879
 880 Arguments:
 881
 882 - "paging": do paging to get guest's memory mapping (json-bool)
 883 - "protocol": destination file(started with "file:") or destination file
 884               descriptor (started with "fd:") (json-string)
 885 - "detach": if specified, command will return immediately, without waiting
 886             for the dump to finish. The user can track progress using
 887             "query-dump". (json-bool)
 888 - "begin": the starting physical address. It's optional, and should be specified
 889            with length together (json-int)
 890 - "length": the memory size, in bytes. It's optional, and should be specified
 891             with begin together (json-int)
 892 - "format": the format of guest memory dump. It's optional, and can be
 893             elf|kdump-zlib|kdump-lzo|kdump-snappy, but non-elf formats will
 894             conflict with paging and filter, ie. begin and length (json-string)
 895
 896 Example:
 897
 898 -> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } }
 899 <- { "return": {} }
 900
 901 Notes:
 902
 903 (1) All boolean arguments default to false
 904
 905 EQMP
 906
 907     {
 908         .name       = "query-dump-guest-memory-capability",
 909         .args_type  = "",
 910     .mhandler.cmd_new = qmp_marshal_query_dump_guest_memory_capability,
 911     },
 912
 913 SQMP
 914 query-dump-guest-memory-capability
 915 ----------
 916
 917 Show available formats for 'dump-guest-memory'
 918
 919 Example:
 920
 921 -> { "execute": "query-dump-guest-memory-capability" }
 922 <- { "return": { "formats":
 923                     ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
 924
 925 EQMP
 926
 927     {
 928         .name       = "query-dump",
 929         .args_type  = "",
 930         .params     = "",
 931         .help       = "query background dump status",
 932         .mhandler.cmd_new = qmp_marshal_query_dump,
 933     },
 934
 935 SQMP
 936 query-dump
 937 ----------
 938
 939 Query background dump status.
 940
 941 Arguments: None.
 942
 943 Example:
 944
 945 -> { "execute": "query-dump" }
 946 <- { "return": { "status": "active", "completed": 1024000,
 947                  "total": 2048000 } }
 948
 949 EQMP
 950
 951 #if defined TARGET_S390X
 952     {
 953         .name       = "dump-skeys",
 954         .args_type  = "filename:F",
 955         .mhandler.cmd_new = qmp_marshal_dump_skeys,
 956     },
 957 #endif
 958
 959 SQMP
 960 dump-skeys
 961 ----------
 962
 963 Save guest storage keys to file.
 964
 965 Arguments:
 966
 967 - "filename": file path (json-string)
 968
 969 Example:
 970
 971 -> { "execute": "dump-skeys", "arguments": { "filename": "/tmp/skeys" } }
 972 <- { "return": {} }
 973
 974 EQMP
 975
 976     {
 977         .name       = "netdev_add",
 978         .args_type  = "netdev:O",
 979         .mhandler.cmd_new = qmp_netdev_add,
 980     },
 981
 982 SQMP
 983 netdev_add
 984 ----------
 985
 986 Add host network device.
 987
 988 Arguments:
 989
 990 - "type": the device type, "tap", "user", ... (json-string)
 991 - "id": the device's ID, must be unique (json-string)
 992 - device options
 993
 994 Example:
 995
 996 -> { "execute": "netdev_add",
 997      "arguments": { "type": "user", "id": "netdev1",
 998                     "dnssearch": "example.org" } }
 999 <- { "return": {} }
1000
1001 Note: The supported device options are the same ones supported by the '-netdev'
1002       command-line argument, which are listed in the '-help' output or QEMU's
1003       manual
1004
1005 EQMP
1006
1007     {
1008         .name       = "netdev_del",
1009         .args_type  = "id:s",
1010         .mhandler.cmd_new = qmp_marshal_netdev_del,
1011     },
1012
1013 SQMP
1014 netdev_del
1015 ----------
1016
1017 Remove host network device.
1018
1019 Arguments:
1020
1021 - "id": the device's ID, must be unique (json-string)
1022
1023 Example:
1024
1025 -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
1026 <- { "return": {} }
1027
1028
1029 EQMP
1030
1031     {
1032         .name       = "object-add",
1033         .args_type  = "qom-type:s,id:s,props:q?",
1034         .mhandler.cmd_new = qmp_marshal_object_add,
1035     },
1036
1037 SQMP
1038 object-add
1039 ----------
1040
1041 Create QOM object.
1042
1043 Arguments:
1044
1045 - "qom-type": the object's QOM type, i.e. the class name (json-string)
1046 - "id": the object's ID, must be unique (json-string)
1047 - "props": a dictionary of object property values (optional, json-dict)
1048
1049 Example:
1050
1051 -> { "execute": "object-add", "arguments": { "qom-type": "rng-random", "id": "rng1",
1052      "props": { "filename": "/dev/hwrng" } } }
1053 <- { "return": {} }
1054
1055 EQMP
1056
1057     {
1058         .name       = "object-del",
1059         .args_type  = "id:s",
1060         .mhandler.cmd_new = qmp_marshal_object_del,
1061     },
1062
1063 SQMP
1064 object-del
1065 ----------
1066
1067 Remove QOM object.
1068
1069 Arguments:
1070
1071 - "id": the object's ID (json-string)
1072
1073 Example:
1074
1075 -> { "execute": "object-del", "arguments": { "id": "rng1" } }
1076 <- { "return": {} }
1077
1078
1079 EQMP
1080
1081
1082     {
1083         .name       = "block_resize",
1084         .args_type  = "device:s?,node-name:s?,size:o",
1085         .mhandler.cmd_new = qmp_marshal_block_resize,
1086     },
1087
1088 SQMP
1089 block_resize
1090 ------------
1091
1092 Resize a block image while a guest is running.
1093
1094 Arguments:
1095
1096 - "device": the device's ID, must be unique (json-string)
1097 - "node-name": the node name in the block driver state graph (json-string)
1098 - "size": new size
1099
1100 Example:
1101
1102 -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
1103 <- { "return": {} }
1104
1105 EQMP
1106
1107     {
1108         .name       = "block-stream",
1109         .args_type  = "job-id:s?,device:B,base:s?,speed:o?,backing-file:s?,on-error:s?",
1110         .mhandler.cmd_new = qmp_marshal_block_stream,
1111     },
1112
1113 SQMP
1114 block-stream
1115 ------------
1116
1117 Copy data from a backing file into a block device.
1118
1119 Arguments:
1120
1121 - "job-id": Identifier for the newly-created block job. If omitted,
1122             the device name will be used. (json-string, optional)
1123 - "device": The device's ID, must be unique (json-string)
1124 - "base": The file name of the backing image above which copying starts
1125           (json-string, optional)
1126 - "backing-file": The backing file string to write into the active layer. This
1127                   filename is not validated.
1128
1129                   If a pathname string is such that it cannot be resolved by
1130                   QEMU, that means that subsequent QMP or HMP commands must use
1131                   node-names for the image in question, as filename lookup
1132                   methods will fail.
1133
1134                   If not specified, QEMU will automatically determine the
1135                   backing file string to use, or error out if there is no
1136                   obvious choice.  Care should be taken when specifying the
1137                   string, to specify a valid filename or protocol.
1138                   (json-string, optional) (Since 2.1)
1139 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1140 - "on-error": the action to take on an error (default 'report').  'stop' and
1141               'enospc' can only be used if the block device supports io-status.
1142               (json-string, optional) (Since 2.1)
1143
1144 Example:
1145
1146 -> { "execute": "block-stream", "arguments": { "device": "virtio0",
1147                                                "base": "/tmp/master.qcow2" } }
1148 <- { "return": {} }
1149
1150 EQMP
1151
1152     {
1153         .name       = "block-commit",
1154         .args_type  = "job-id:s?,device:B,base:s?,top:s?,backing-file:s?,speed:o?",
1155         .mhandler.cmd_new = qmp_marshal_block_commit,
1156     },
1157
1158 SQMP
1159 block-commit
1160 ------------
1161
1162 Live commit of data from overlay image nodes into backing nodes - i.e., writes
1163 data between 'top' and 'base' into 'base'.
1164
1165 Arguments:
1166
1167 - "job-id": Identifier for the newly-created block job. If omitted,
1168             the device name will be used. (json-string, optional)
1169 - "device": The device's ID, must be unique (json-string)
1170 - "base": The file name of the backing image to write data into.
1171           If not specified, this is the deepest backing image
1172           (json-string, optional)
1173 - "top":  The file name of the backing image within the image chain,
1174           which contains the topmost data to be committed down. If
1175           not specified, this is the active layer. (json-string, optional)
1176
1177 - backing-file:     The backing file string to write into the overlay
1178                     image of 'top'.  If 'top' is the active layer,
1179                     specifying a backing file string is an error. This
1180                     filename is not validated.
1181
1182                     If a pathname string is such that it cannot be
1183                     resolved by QEMU, that means that subsequent QMP or
1184                     HMP commands must use node-names for the image in
1185                     question, as filename lookup methods will fail.
1186
1187                     If not specified, QEMU will automatically determine
1188                     the backing file string to use, or error out if
1189                     there is no obvious choice. Care should be taken
1190                     when specifying the string, to specify a valid
1191                     filename or protocol.
1192                     (json-string, optional) (Since 2.1)
1193
1194           If top == base, that is an error.
1195           If top == active, the job will not be completed by itself,
1196           user needs to complete the job with the block-job-complete
1197           command after getting the ready event. (Since 2.0)
1198
1199           If the base image is smaller than top, then the base image
1200           will be resized to be the same size as top.  If top is
1201           smaller than the base image, the base will not be
1202           truncated.  If you want the base image size to match the
1203           size of the smaller top, you can safely truncate it
1204           yourself once the commit operation successfully completes.
1205           (json-string)
1206 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1207
1208
1209 Example:
1210
1211 -> { "execute": "block-commit", "arguments": { "device": "virtio0",
1212                                               "top": "/tmp/snap1.qcow2" } }
1213 <- { "return": {} }
1214
1215 EQMP
1216
1217     {
1218         .name       = "drive-backup",
1219         .args_type  = "job-id:s?,sync:s,device:B,target:s,speed:i?,mode:s?,"
1220                       "format:s?,bitmap:s?,on-source-error:s?,on-target-error:s?",
1221         .mhandler.cmd_new = qmp_marshal_drive_backup,
1222     },
1223
1224 SQMP
1225 drive-backup
1226 ------------
1227
1228 Start a point-in-time copy of a block device to a new destination.  The
1229 status of ongoing drive-backup operations can be checked with
1230 query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
1231 The operation can be stopped before it has completed using the
1232 block-job-cancel command.
1233
1234 Arguments:
1235
1236 - "job-id": Identifier for the newly-created block job. If omitted,
1237             the device name will be used. (json-string, optional)
1238 - "device": the name of the device which should be copied.
1239             (json-string)
1240 - "target": the target of the new image. If the file exists, or if it is a
1241             device, the existing file/device will be used as the new
1242             destination.  If it does not exist, a new file will be created.
1243             (json-string)
1244 - "format": the format of the new destination, default is to probe if 'mode' is
1245             'existing', else the format of the source
1246             (json-string, optional)
1247 - "sync": what parts of the disk image should be copied to the destination;
1248   possibilities include "full" for all the disk, "top" for only the sectors
1249   allocated in the topmost image, "incremental" for only the dirty sectors in
1250   the bitmap, or "none" to only replicate new I/O (MirrorSyncMode).
1251 - "bitmap": dirty bitmap name for sync==incremental. Must be present if sync
1252             is "incremental", must NOT be present otherwise.
1253 - "mode": whether and how QEMU should create a new image
1254           (NewImageMode, optional, default 'absolute-paths')
1255 - "speed": the maximum speed, in bytes per second (json-int, optional)
1256 - "on-source-error": the action to take on an error on the source, default
1257                      'report'.  'stop' and 'enospc' can only be used
1258                      if the block device supports io-status.
1259                      (BlockdevOnError, optional)
1260 - "on-target-error": the action to take on an error on the target, default
1261                      'report' (no limitations, since this applies to
1262                      a different block device than device).
1263                      (BlockdevOnError, optional)
1264
1265 Example:
1266 -> { "execute": "drive-backup", "arguments": { "device": "drive0",
1267                                                "sync": "full",
1268                                                "target": "backup.img" } }
1269 <- { "return": {} }
1270
1271 EQMP
1272
1273     {
1274         .name       = "blockdev-backup",
1275         .args_type  = "job-id:s?,sync:s,device:B,target:B,speed:i?,"
1276                       "on-source-error:s?,on-target-error:s?",
1277         .mhandler.cmd_new = qmp_marshal_blockdev_backup,
1278     },
1279
1280 SQMP
1281 blockdev-backup
1282 ---------------
1283
1284 The device version of drive-backup: this command takes an existing named device
1285 as backup target.
1286
1287 Arguments:
1288
1289 - "job-id": Identifier for the newly-created block job. If omitted,
1290             the device name will be used. (json-string, optional)
1291 - "device": the name of the device which should be copied.
1292             (json-string)
1293 - "target": the name of the backup target device. (json-string)
1294 - "sync": what parts of the disk image should be copied to the destination;
1295           possibilities include "full" for all the disk, "top" for only the
1296           sectors allocated in the topmost image, or "none" to only replicate
1297           new I/O (MirrorSyncMode).
1298 - "speed": the maximum speed, in bytes per second (json-int, optional)
1299 - "on-source-error": the action to take on an error on the source, default
1300                      'report'.  'stop' and 'enospc' can only be used
1301                      if the block device supports io-status.
1302                      (BlockdevOnError, optional)
1303 - "on-target-error": the action to take on an error on the target, default
1304                      'report' (no limitations, since this applies to
1305                      a different block device than device).
1306                      (BlockdevOnError, optional)
1307
1308 Example:
1309 -> { "execute": "blockdev-backup", "arguments": { "device": "src-id",
1310                                                   "sync": "full",
1311                                                   "target": "tgt-id" } }
1312 <- { "return": {} }
1313
1314 EQMP
1315
1316     {
1317         .name       = "block-job-set-speed",
1318         .args_type  = "device:B,speed:o",
1319         .mhandler.cmd_new = qmp_marshal_block_job_set_speed,
1320     },
1321
1322     {
1323         .name       = "block-job-cancel",
1324         .args_type  = "device:B,force:b?",
1325         .mhandler.cmd_new = qmp_marshal_block_job_cancel,
1326     },
1327     {
1328         .name       = "block-job-pause",
1329         .args_type  = "device:B",
1330         .mhandler.cmd_new = qmp_marshal_block_job_pause,
1331     },
1332     {
1333         .name       = "block-job-resume",
1334         .args_type  = "device:B",
1335         .mhandler.cmd_new = qmp_marshal_block_job_resume,
1336     },
1337     {
1338         .name       = "block-job-complete",
1339         .args_type  = "device:B",
1340         .mhandler.cmd_new = qmp_marshal_block_job_complete,
1341     },
1342     {
1343         .name       = "transaction",
1344         .args_type  = "actions:q,properties:q?",
1345         .mhandler.cmd_new = qmp_marshal_transaction,
1346     },
1347
1348 SQMP
1349 transaction
1350 -----------
1351
1352 Atomically operate on one or more block devices.  Operations that are
1353 currently supported:
1354
1355     - drive-backup
1356     - blockdev-backup
1357     - blockdev-snapshot-sync
1358     - blockdev-snapshot-internal-sync
1359     - abort
1360     - block-dirty-bitmap-add
1361     - block-dirty-bitmap-clear
1362
1363 Refer to the qemu/qapi-schema.json file for minimum required QEMU
1364 versions for these operations.  A list of dictionaries is accepted,
1365 that contains the actions to be performed.  If there is any failure
1366 performing any of the operations, all operations for the group are
1367 abandoned.
1368
1369 For external snapshots, the dictionary contains the device, the file to use for
1370 the new snapshot, and the format.  The default format, if not specified, is
1371 qcow2.
1372
1373 Each new snapshot defaults to being created by QEMU (wiping any
1374 contents if the file already exists), but it is also possible to reuse
1375 an externally-created file.  In the latter case, you should ensure that
1376 the new image file has the same contents as the current one; QEMU cannot
1377 perform any meaningful check.  Typically this is achieved by using the
1378 current image file as the backing file for the new image.
1379
1380 On failure, the original disks pre-snapshot attempt will be used.
1381
1382 For internal snapshots, the dictionary contains the device and the snapshot's
1383 name.  If an internal snapshot matching name already exists, the request will
1384 be rejected.  Only some image formats support it, for example, qcow2, rbd,
1385 and sheepdog.
1386
1387 On failure, qemu will try delete the newly created internal snapshot in the
1388 transaction.  When an I/O error occurs during deletion, the user needs to fix
1389 it later with qemu-img or other command.
1390
1391 Arguments:
1392
1393 actions array:
1394     - "type": the operation to perform (json-string).  Possible
1395               values: "drive-backup", "blockdev-backup",
1396                       "blockdev-snapshot-sync",
1397                       "blockdev-snapshot-internal-sync",
1398                       "abort", "block-dirty-bitmap-add",
1399                       "block-dirty-bitmap-clear"
1400     - "data": a dictionary.  The contents depend on the value
1401       of "type".  When "type" is "blockdev-snapshot-sync":
1402       - "device": device name to snapshot (json-string)
1403       - "node-name": graph node name to snapshot (json-string)
1404       - "snapshot-file": name of new image file (json-string)
1405       - "snapshot-node-name": graph node name of the new snapshot (json-string)
1406       - "format": format of new image (json-string, optional)
1407       - "mode": whether and how QEMU should create the snapshot file
1408         (NewImageMode, optional, default "absolute-paths")
1409       When "type" is "blockdev-snapshot-internal-sync":
1410       - "device": device name to snapshot (json-string)
1411       - "name": name of the new snapshot (json-string)
1412
1413 Example:
1414
1415 -> { "execute": "transaction",
1416      "arguments": { "actions": [
1417          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0",
1418                                          "snapshot-file": "/some/place/my-image",
1419                                          "format": "qcow2" } },
1420          { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile",
1421                                          "snapshot-file": "/some/place/my-image2",
1422                                          "snapshot-node-name": "node3432",
1423                                          "mode": "existing",
1424                                          "format": "qcow2" } },
1425          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1",
1426                                          "snapshot-file": "/some/place/my-image2",
1427                                          "mode": "existing",
1428                                          "format": "qcow2" } },
1429          { "type": "blockdev-snapshot-internal-sync", "data" : {
1430                                          "device": "ide-hd2",
1431                                          "name": "snapshot0" } } ] } }
1432 <- { "return": {} }
1433
1434 EQMP
1435
1436     {
1437         .name       = "block-dirty-bitmap-add",
1438         .args_type  = "node:B,name:s,granularity:i?",
1439         .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_add,
1440     },
1441
1442 SQMP
1443
1444 block-dirty-bitmap-add
1445 ----------------------
1446 Since 2.4
1447
1448 Create a dirty bitmap with a name on the device, and start tracking the writes.
1449
1450 Arguments:
1451
1452 - "node": device/node on which to create dirty bitmap (json-string)
1453 - "name": name of the new dirty bitmap (json-string)
1454 - "granularity": granularity to track writes with (int, optional)
1455
1456 Example:
1457
1458 -> { "execute": "block-dirty-bitmap-add", "arguments": { "node": "drive0",
1459                                                    "name": "bitmap0" } }
1460 <- { "return": {} }
1461
1462 EQMP
1463
1464     {
1465         .name       = "block-dirty-bitmap-remove",
1466         .args_type  = "node:B,name:s",
1467         .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_remove,
1468     },
1469
1470 SQMP
1471
1472 block-dirty-bitmap-remove
1473 -------------------------
1474 Since 2.4
1475
1476 Stop write tracking and remove the dirty bitmap that was created with
1477 block-dirty-bitmap-add.
1478
1479 Arguments:
1480
1481 - "node": device/node on which to remove dirty bitmap (json-string)
1482 - "name": name of the dirty bitmap to remove (json-string)
1483
1484 Example:
1485
1486 -> { "execute": "block-dirty-bitmap-remove", "arguments": { "node": "drive0",
1487                                                       "name": "bitmap0" } }
1488 <- { "return": {} }
1489
1490 EQMP
1491
1492     {
1493         .name       = "block-dirty-bitmap-clear",
1494         .args_type  = "node:B,name:s",
1495         .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_clear,
1496     },
1497
1498 SQMP
1499
1500 block-dirty-bitmap-clear
1501 ------------------------
1502 Since 2.4
1503
1504 Reset the dirty bitmap associated with a node so that an incremental backup
1505 from this point in time forward will only backup clusters modified after this
1506 clear operation.
1507
1508 Arguments:
1509
1510 - "node": device/node on which to remove dirty bitmap (json-string)
1511 - "name": name of the dirty bitmap to remove (json-string)
1512
1513 Example:
1514
1515 -> { "execute": "block-dirty-bitmap-clear", "arguments": { "node": "drive0",
1516                                                            "name": "bitmap0" } }
1517 <- { "return": {} }
1518
1519 EQMP
1520
1521     {
1522         .name       = "blockdev-snapshot-sync",
1523         .args_type  = "device:s?,node-name:s?,snapshot-file:s,snapshot-node-name:s?,format:s?,mode:s?",
1524         .mhandler.cmd_new = qmp_marshal_blockdev_snapshot_sync,
1525     },
1526
1527 SQMP
1528 blockdev-snapshot-sync
1529 ----------------------
1530
1531 Synchronous snapshot of a block device. snapshot-file specifies the
1532 target of the new image. If the file exists, or if it is a device, the
1533 snapshot will be created in the existing file/device. If does not
1534 exist, a new file will be created. format specifies the format of the
1535 snapshot image, default is qcow2.
1536
1537 Arguments:
1538
1539 - "device": device name to snapshot (json-string)
1540 - "node-name": graph node name to snapshot (json-string)
1541 - "snapshot-file": name of new image file (json-string)
1542 - "snapshot-node-name": graph node name of the new snapshot (json-string)
1543 - "mode": whether and how QEMU should create the snapshot file
1544   (NewImageMode, optional, default "absolute-paths")
1545 - "format": format of new image (json-string, optional)
1546
1547 Example:
1548
1549 -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0",
1550                                                          "snapshot-file":
1551                                                         "/some/place/my-image",
1552                                                         "format": "qcow2" } }
1553 <- { "return": {} }
1554
1555 EQMP
1556
1557     {
1558         .name       = "blockdev-snapshot",
1559         .args_type  = "node:s,overlay:s",
1560         .mhandler.cmd_new = qmp_marshal_blockdev_snapshot,
1561     },
1562
1563 SQMP
1564 blockdev-snapshot
1565 -----------------
1566 Since 2.5
1567
1568 Create a snapshot, by installing 'node' as the backing image of
1569 'overlay'. Additionally, if 'node' is associated with a block
1570 device, the block device changes to using 'overlay' as its new active
1571 image.
1572
1573 Arguments:
1574
1575 - "node": device that will have a snapshot created (json-string)
1576 - "overlay": device that will have 'node' as its backing image (json-string)
1577
1578 Example:
1579
1580 -> { "execute": "blockdev-add",
1581                 "arguments": { "options": { "driver": "qcow2",
1582                                             "node-name": "node1534",
1583                                             "file": { "driver": "file",
1584                                                       "filename": "hd1.qcow2" },
1585                                             "backing": "" } } }
1586
1587 <- { "return": {} }
1588
1589 -> { "execute": "blockdev-snapshot", "arguments": { "node": "ide-hd0",
1590                                                     "overlay": "node1534" } }
1591 <- { "return": {} }
1592
1593 EQMP
1594
1595     {
1596         .name       = "blockdev-snapshot-internal-sync",
1597         .args_type  = "device:B,name:s",
1598         .mhandler.cmd_new = qmp_marshal_blockdev_snapshot_internal_sync,
1599     },
1600
1601 SQMP
1602 blockdev-snapshot-internal-sync
1603 -------------------------------
1604
1605 Synchronously take an internal snapshot of a block device when the format of
1606 image used supports it.  If the name is an empty string, or a snapshot with
1607 name already exists, the operation will fail.
1608
1609 Arguments:
1610
1611 - "device": device name to snapshot (json-string)
1612 - "name": name of the new snapshot (json-string)
1613
1614 Example:
1615
1616 -> { "execute": "blockdev-snapshot-internal-sync",
1617                 "arguments": { "device": "ide-hd0",
1618                                "name": "snapshot0" }
1619    }
1620 <- { "return": {} }
1621
1622 EQMP
1623
1624     {
1625         .name       = "blockdev-snapshot-delete-internal-sync",
1626         .args_type  = "device:B,id:s?,name:s?",
1627         .mhandler.cmd_new =
1628                       qmp_marshal_blockdev_snapshot_delete_internal_sync,
1629     },
1630
1631 SQMP
1632 blockdev-snapshot-delete-internal-sync
1633 --------------------------------------
1634
1635 Synchronously delete an internal snapshot of a block device when the format of
1636 image used supports it.  The snapshot is identified by name or id or both.  One
1637 of name or id is required.  If the snapshot is not found, the operation will
1638 fail.
1639
1640 Arguments:
1641
1642 - "device": device name (json-string)
1643 - "id": ID of the snapshot (json-string, optional)
1644 - "name": name of the snapshot (json-string, optional)
1645
1646 Example:
1647
1648 -> { "execute": "blockdev-snapshot-delete-internal-sync",
1649                 "arguments": { "device": "ide-hd0",
1650                                "name": "snapshot0" }
1651    }
1652 <- { "return": {
1653                    "id": "1",
1654                    "name": "snapshot0",
1655                    "vm-state-size": 0,
1656                    "date-sec": 1000012,
1657                    "date-nsec": 10,
1658                    "vm-clock-sec": 100,
1659                    "vm-clock-nsec": 20
1660      }
1661    }
1662
1663 EQMP
1664
1665     {
1666         .name       = "drive-mirror",
1667         .args_type  = "job-id:s?,sync:s,device:B,target:s,speed:i?,mode:s?,"
1668                       "format:s?,node-name:s?,replaces:s?,"
1669                       "on-source-error:s?,on-target-error:s?,"
1670                       "unmap:b?,"
1671                       "granularity:i?,buf-size:i?",
1672         .mhandler.cmd_new = qmp_marshal_drive_mirror,
1673     },
1674
1675 SQMP
1676 drive-mirror
1677 ------------
1678
1679 Start mirroring a block device's writes to a new destination. target
1680 specifies the target of the new image. If the file exists, or if it is
1681 a device, it will be used as the new destination for writes. If it does not
1682 exist, a new file will be created. format specifies the format of the
1683 mirror image, default is to probe if mode='existing', else the format
1684 of the source.
1685
1686 Arguments:
1687
1688 - "job-id": Identifier for the newly-created block job. If omitted,
1689             the device name will be used. (json-string, optional)
1690 - "device": device name to operate on (json-string)
1691 - "target": name of new image file (json-string)
1692 - "format": format of new image (json-string, optional)
1693 - "node-name": the name of the new block driver state in the node graph
1694                (json-string, optional)
1695 - "replaces": the block driver node name to replace when finished
1696               (json-string, optional)
1697 - "mode": how an image file should be created into the target
1698   file/device (NewImageMode, optional, default 'absolute-paths')
1699 - "speed": maximum speed of the streaming job, in bytes per second
1700   (json-int)
1701 - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional)
1702 - "buf-size": maximum amount of data in flight from source to target, in bytes
1703   (json-int, default 10M)
1704 - "sync": what parts of the disk image should be copied to the destination;
1705   possibilities include "full" for all the disk, "top" for only the sectors
1706   allocated in the topmost image, or "none" to only replicate new I/O
1707   (MirrorSyncMode).
1708 - "on-source-error": the action to take on an error on the source
1709   (BlockdevOnError, default 'report')
1710 - "on-target-error": the action to take on an error on the target
1711   (BlockdevOnError, default 'report')
1712 - "unmap": whether the target sectors should be discarded where source has only
1713   zeroes. (json-bool, optional, default true)
1714
1715 The default value of the granularity is the image cluster size clamped
1716 between 4096 and 65536, if the image format defines one.  If the format
1717 does not define a cluster size, the default value of the granularity
1718 is 65536.
1719
1720
1721 Example:
1722
1723 -> { "execute": "drive-mirror", "arguments": { "device": "ide-hd0",
1724                                                "target": "/some/place/my-image",
1725                                                "sync": "full",
1726                                                "format": "qcow2" } }
1727 <- { "return": {} }
1728
1729 EQMP
1730
1731     {
1732         .name       = "blockdev-mirror",
1733         .args_type  = "job-id:s?,sync:s,device:B,target:B,replaces:s?,speed:i?,"
1734                       "on-source-error:s?,on-target-error:s?,"
1735                       "granularity:i?,buf-size:i?",
1736         .mhandler.cmd_new = qmp_marshal_blockdev_mirror,
1737     },
1738
1739 SQMP
1740 blockdev-mirror
1741 ------------
1742
1743 Start mirroring a block device's writes to another block device. target
1744 specifies the target of mirror operation.
1745
1746 Arguments:
1747
1748 - "job-id": Identifier for the newly-created block job. If omitted,
1749             the device name will be used. (json-string, optional)
1750 - "device": device name to operate on (json-string)
1751 - "target": device name to mirror to (json-string)
1752 - "replaces": the block driver node name to replace when finished
1753               (json-string, optional)
1754 - "speed": maximum speed of the streaming job, in bytes per second
1755   (json-int)
1756 - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional)
1757 - "buf_size": maximum amount of data in flight from source to target, in bytes
1758   (json-int, default 10M)
1759 - "sync": what parts of the disk image should be copied to the destination;
1760   possibilities include "full" for all the disk, "top" for only the sectors
1761   allocated in the topmost image, or "none" to only replicate new I/O
1762   (MirrorSyncMode).
1763 - "on-source-error": the action to take on an error on the source
1764   (BlockdevOnError, default 'report')
1765 - "on-target-error": the action to take on an error on the target
1766   (BlockdevOnError, default 'report')
1767
1768 The default value of the granularity is the image cluster size clamped
1769 between 4096 and 65536, if the image format defines one.  If the format
1770 does not define a cluster size, the default value of the granularity
1771 is 65536.
1772
1773 Example:
1774
1775 -> { "execute": "blockdev-mirror", "arguments": { "device": "ide-hd0",
1776                                                   "target": "target0",
1777                                                   "sync": "full" } }
1778 <- { "return": {} }
1779
1780 EQMP
1781     {
1782         .name       = "change-backing-file",
1783         .args_type  = "device:s,image-node-name:s,backing-file:s",
1784         .mhandler.cmd_new = qmp_marshal_change_backing_file,
1785     },
1786
1787 SQMP
1788 change-backing-file
1789 -------------------
1790 Since: 2.1
1791
1792 Change the backing file in the image file metadata.  This does not cause
1793 QEMU to reopen the image file to reparse the backing filename (it may,
1794 however, perform a reopen to change permissions from r/o -> r/w -> r/o,
1795 if needed). The new backing file string is written into the image file
1796 metadata, and the QEMU internal strings are updated.
1797
1798 Arguments:
1799
1800 - "image-node-name":    The name of the block driver state node of the
1801                         image to modify.  The "device" is argument is used to
1802                         verify "image-node-name" is in the chain described by
1803                         "device".
1804                         (json-string, optional)
1805
1806 - "device":             The name of the device.
1807                         (json-string)
1808
1809 - "backing-file":       The string to write as the backing file.  This string is
1810                         not validated, so care should be taken when specifying
1811                         the string or the image chain may not be able to be
1812                         reopened again.
1813                         (json-string)
1814
1815 Returns: Nothing on success
1816          If "device" does not exist or cannot be determined, DeviceNotFound
1817
1818 EQMP
1819
1820     {
1821         .name       = "balloon",
1822         .args_type  = "value:M",
1823         .mhandler.cmd_new = qmp_marshal_balloon,
1824     },
1825
1826 SQMP
1827 balloon
1828 -------
1829
1830 Request VM to change its memory allocation (in bytes).
1831
1832 Arguments:
1833
1834 - "value": New memory allocation (json-int)
1835
1836 Example:
1837
1838 -> { "execute": "balloon", "arguments": { "value": 536870912 } }
1839 <- { "return": {} }
1840
1841 EQMP
1842
1843     {
1844         .name       = "set_link",
1845         .args_type  = "name:s,up:b",
1846         .mhandler.cmd_new = qmp_marshal_set_link,
1847     },
1848
1849 SQMP
1850 set_link
1851 --------
1852
1853 Change the link status of a network adapter.
1854
1855 Arguments:
1856
1857 - "name": network device name (json-string)
1858 - "up": status is up (json-bool)
1859
1860 Example:
1861
1862 -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
1863 <- { "return": {} }
1864
1865 EQMP
1866
1867     {
1868         .name       = "getfd",
1869         .args_type  = "fdname:s",
1870         .params     = "getfd name",
1871         .help       = "receive a file descriptor via SCM rights and assign it a name",
1872         .mhandler.cmd_new = qmp_marshal_getfd,
1873     },
1874
1875 SQMP
1876 getfd
1877 -----
1878
1879 Receive a file descriptor via SCM rights and assign it a name.
1880
1881 Arguments:
1882
1883 - "fdname": file descriptor name (json-string)
1884
1885 Example:
1886
1887 -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
1888 <- { "return": {} }
1889
1890 Notes:
1891
1892 (1) If the name specified by the "fdname" argument already exists,
1893     the file descriptor assigned to it will be closed and replaced
1894     by the received file descriptor.
1895 (2) The 'closefd' command can be used to explicitly close the file
1896     descriptor when it is no longer needed.
1897
1898 EQMP
1899
1900     {
1901         .name       = "closefd",
1902         .args_type  = "fdname:s",
1903         .params     = "closefd name",
1904         .help       = "close a file descriptor previously passed via SCM rights",
1905         .mhandler.cmd_new = qmp_marshal_closefd,
1906     },
1907
1908 SQMP
1909 closefd
1910 -------
1911
1912 Close a file descriptor previously passed via SCM rights.
1913
1914 Arguments:
1915
1916 - "fdname": file descriptor name (json-string)
1917
1918 Example:
1919
1920 -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
1921 <- { "return": {} }
1922
1923 EQMP
1924
1925      {
1926         .name       = "add-fd",
1927         .args_type  = "fdset-id:i?,opaque:s?",
1928         .params     = "add-fd fdset-id opaque",
1929         .help       = "Add a file descriptor, that was passed via SCM rights, to an fd set",
1930         .mhandler.cmd_new = qmp_marshal_add_fd,
1931     },
1932
1933 SQMP
1934 add-fd
1935 -------
1936
1937 Add a file descriptor, that was passed via SCM rights, to an fd set.
1938
1939 Arguments:
1940
1941 - "fdset-id": The ID of the fd set to add the file descriptor to.
1942               (json-int, optional)
1943 - "opaque": A free-form string that can be used to describe the fd.
1944             (json-string, optional)
1945
1946 Return a json-object with the following information:
1947
1948 - "fdset-id": The ID of the fd set that the fd was added to. (json-int)
1949 - "fd": The file descriptor that was received via SCM rights and added to the
1950         fd set. (json-int)
1951
1952 Example:
1953
1954 -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
1955 <- { "return": { "fdset-id": 1, "fd": 3 } }
1956
1957 Notes:
1958
1959 (1) The list of fd sets is shared by all monitor connections.
1960 (2) If "fdset-id" is not specified, a new fd set will be created.
1961
1962 EQMP
1963
1964      {
1965         .name       = "remove-fd",
1966         .args_type  = "fdset-id:i,fd:i?",
1967         .params     = "remove-fd fdset-id fd",
1968         .help       = "Remove a file descriptor from an fd set",
1969         .mhandler.cmd_new = qmp_marshal_remove_fd,
1970     },
1971
1972 SQMP
1973 remove-fd
1974 ---------
1975
1976 Remove a file descriptor from an fd set.
1977
1978 Arguments:
1979
1980 - "fdset-id": The ID of the fd set that the file descriptor belongs to.
1981               (json-int)
1982 - "fd": The file descriptor that is to be removed. (json-int, optional)
1983
1984 Example:
1985
1986 -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
1987 <- { "return": {} }
1988
1989 Notes:
1990
1991 (1) The list of fd sets is shared by all monitor connections.
1992 (2) If "fd" is not specified, all file descriptors in "fdset-id" will be
1993     removed.
1994
1995 EQMP
1996
1997     {
1998         .name       = "query-fdsets",
1999         .args_type  = "",
2000         .help       = "Return information describing all fd sets",
2001         .mhandler.cmd_new = qmp_marshal_query_fdsets,
2002     },
2003
2004 SQMP
2005 query-fdsets
2006 -------------
2007
2008 Return information describing all fd sets.
2009
2010 Arguments: None
2011
2012 Example:
2013
2014 -> { "execute": "query-fdsets" }
2015 <- { "return": [
2016        {
2017          "fds": [
2018            {
2019              "fd": 30,
2020              "opaque": "rdonly:/path/to/file"
2021            },
2022            {
2023              "fd": 24,
2024              "opaque": "rdwr:/path/to/file"
2025            }
2026          ],
2027          "fdset-id": 1
2028        },
2029        {
2030          "fds": [
2031            {
2032              "fd": 28
2033            },
2034            {
2035              "fd": 29
2036            }
2037          ],
2038          "fdset-id": 0
2039        }
2040      ]
2041    }
2042
2043 Note: The list of fd sets is shared by all monitor connections.
2044
2045 EQMP
2046
2047     {
2048         .name       = "block_passwd",
2049         .args_type  = "device:s?,node-name:s?,password:s",
2050         .mhandler.cmd_new = qmp_marshal_block_passwd,
2051     },
2052
2053 SQMP
2054 block_passwd
2055 ------------
2056
2057 Set the password of encrypted block devices.
2058
2059 Arguments:
2060
2061 - "device": device name (json-string)
2062 - "node-name": name in the block driver state graph (json-string)
2063 - "password": password (json-string)
2064
2065 Example:
2066
2067 -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0",
2068                                                "password": "12345" } }
2069 <- { "return": {} }
2070
2071 EQMP
2072
2073     {
2074         .name       = "block_set_io_throttle",
2075         .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,bps_max_length:l?,bps_rd_max_length:l?,bps_wr_max_length:l?,iops_max_length:l?,iops_rd_max_length:l?,iops_wr_max_length:l?,iops_size:l?,group:s?",
2076         .mhandler.cmd_new = qmp_marshal_block_set_io_throttle,
2077     },
2078
2079 SQMP
2080 block_set_io_throttle
2081 ------------
2082
2083 Change I/O throttle limits for a block drive.
2084
2085 Arguments:
2086
2087 - "device": device name (json-string)
2088 - "bps": total throughput limit in bytes per second (json-int)
2089 - "bps_rd": read throughput limit in bytes per second (json-int)
2090 - "bps_wr": write throughput limit in bytes per second (json-int)
2091 - "iops": total I/O operations per second (json-int)
2092 - "iops_rd": read I/O operations per second (json-int)
2093 - "iops_wr": write I/O operations per second (json-int)
2094 - "bps_max": total throughput limit during bursts, in bytes (json-int, optional)
2095 - "bps_rd_max": read throughput limit during bursts, in bytes (json-int, optional)
2096 - "bps_wr_max": write throughput limit during bursts, in bytes (json-int, optional)
2097 - "iops_max": total I/O operations per second during bursts (json-int, optional)
2098 - "iops_rd_max": read I/O operations per second during bursts (json-int, optional)
2099 - "iops_wr_max": write I/O operations per second during bursts (json-int, optional)
2100 - "bps_max_length": maximum length of the @bps_max burst period, in seconds (json-int, optional)
2101 - "bps_rd_max_length": maximum length of the @bps_rd_max burst period, in seconds (json-int, optional)
2102 - "bps_wr_max_length": maximum length of the @bps_wr_max burst period, in seconds (json-int, optional)
2103 - "iops_max_length": maximum length of the @iops_max burst period, in seconds (json-int, optional)
2104 - "iops_rd_max_length": maximum length of the @iops_rd_max burst period, in seconds (json-int, optional)
2105 - "iops_wr_max_length": maximum length of the @iops_wr_max burst period, in seconds (json-int, optional)
2106 - "iops_size":  I/O size in bytes when limiting (json-int, optional)
2107 - "group": throttle group name (json-string, optional)
2108
2109 Example:
2110
2111 -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
2112                                                "bps": 1000000,
2113                                                "bps_rd": 0,
2114                                                "bps_wr": 0,
2115                                                "iops": 0,
2116                                                "iops_rd": 0,
2117                                                "iops_wr": 0,
2118                                                "bps_max": 8000000,
2119                                                "bps_rd_max": 0,
2120                                                "bps_wr_max": 0,
2121                                                "iops_max": 0,
2122                                                "iops_rd_max": 0,
2123                                                "iops_wr_max": 0,
2124                                                "bps_max_length": 60,
2125                                                "iops_size": 0 } }
2126 <- { "return": {} }
2127
2128 EQMP
2129
2130     {
2131         .name       = "set_password",
2132         .args_type  = "protocol:s,password:s,connected:s?",
2133         .mhandler.cmd_new = qmp_marshal_set_password,
2134     },
2135
2136 SQMP
2137 set_password
2138 ------------
2139
2140 Set the password for vnc/spice protocols.
2141
2142 Arguments:
2143
2144 - "protocol": protocol name (json-string)
2145 - "password": password (json-string)
2146 - "connected": [ keep | disconnect | fail ] (json-string, optional)
2147
2148 Example:
2149
2150 -> { "execute": "set_password", "arguments": { "protocol": "vnc",
2151                                                "password": "secret" } }
2152 <- { "return": {} }
2153
2154 EQMP
2155
2156     {
2157         .name       = "expire_password",
2158         .args_type  = "protocol:s,time:s",
2159         .mhandler.cmd_new = qmp_marshal_expire_password,
2160     },
2161
2162 SQMP
2163 expire_password
2164 ---------------
2165
2166 Set the password expire time for vnc/spice protocols.
2167
2168 Arguments:
2169
2170 - "protocol": protocol name (json-string)
2171 - "time": [ now | never | +secs | secs ] (json-string)
2172
2173 Example:
2174
2175 -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
2176                                                   "time": "+60" } }
2177 <- { "return": {} }
2178
2179 EQMP
2180
2181     {
2182         .name       = "add_client",
2183         .args_type  = "protocol:s,fdname:s,skipauth:b?,tls:b?",
2184         .mhandler.cmd_new = qmp_marshal_add_client,
2185     },
2186
2187 SQMP
2188 add_client
2189 ----------
2190
2191 Add a graphics client
2192
2193 Arguments:
2194
2195 - "protocol": protocol name (json-string)
2196 - "fdname": file descriptor name (json-string)
2197 - "skipauth": whether to skip authentication (json-bool, optional)
2198 - "tls": whether to perform TLS (json-bool, optional)
2199
2200 Example:
2201
2202 -> { "execute": "add_client", "arguments": { "protocol": "vnc",
2203                                              "fdname": "myclient" } }
2204 <- { "return": {} }
2205
2206 EQMP
2207     {
2208         .name       = "qmp_capabilities",
2209         .args_type  = "",
2210         .params     = "",
2211         .help       = "enable QMP capabilities",
2212         .mhandler.cmd_new = qmp_capabilities,
2213     },
2214
2215 SQMP
2216 qmp_capabilities
2217 ----------------
2218
2219 Enable QMP capabilities.
2220
2221 Arguments: None.
2222
2223 Example:
2224
2225 -> { "execute": "qmp_capabilities" }
2226 <- { "return": {} }
2227
2228 Note: This command must be issued before issuing any other command.
2229
2230 EQMP
2231
2232     {
2233         .name       = "human-monitor-command",
2234         .args_type  = "command-line:s,cpu-index:i?",
2235         .mhandler.cmd_new = qmp_marshal_human_monitor_command,
2236     },
2237
2238 SQMP
2239 human-monitor-command
2240 ---------------------
2241
2242 Execute a Human Monitor command.
2243
2244 Arguments:
2245
2246 - command-line: the command name and its arguments, just like the
2247                 Human Monitor's shell (json-string)
2248 - cpu-index: select the CPU number to be used by commands which access CPU
2249              data, like 'info registers'. The Monitor selects CPU 0 if this
2250              argument is not provided (json-int, optional)
2251
2252 Example:
2253
2254 -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } }
2255 <- { "return": "kvm support: enabled\r\n" }
2256
2257 Notes:
2258
2259 (1) The Human Monitor is NOT an stable interface, this means that command
2260     names, arguments and responses can change or be removed at ANY time.
2261     Applications that rely on long term stability guarantees should NOT
2262     use this command
2263
2264 (2) Limitations:
2265
2266     o This command is stateless, this means that commands that depend
2267       on state information (such as getfd) might not work
2268
2269     o Commands that prompt the user for data (eg. 'cont' when the block
2270       device is encrypted) don't currently work
2271
2272 3. Query Commands
2273 =================
2274
2275 HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
2276 HXCOMM this! We will possibly move query commands definitions inside those
2277 HXCOMM sections, just like regular commands.
2278
2279 EQMP
2280
2281 SQMP
2282 query-version
2283 -------------
2284
2285 Show QEMU version.
2286
2287 Return a json-object with the following information:
2288
2289 - "qemu": A json-object containing three integer values:
2290     - "major": QEMU's major version (json-int)
2291     - "minor": QEMU's minor version (json-int)
2292     - "micro": QEMU's micro version (json-int)
2293 - "package": package's version (json-string)
2294
2295 Example:
2296
2297 -> { "execute": "query-version" }
2298 <- {
2299       "return":{
2300          "qemu":{
2301             "major":0,
2302             "minor":11,
2303             "micro":5
2304          },
2305          "package":""
2306       }
2307    }
2308
2309 EQMP
2310
2311     {
2312         .name       = "query-version",
2313         .args_type  = "",
2314         .mhandler.cmd_new = qmp_marshal_query_version,
2315     },
2316
2317 SQMP
2318 query-commands
2319 --------------
2320
2321 List QMP available commands.
2322
2323 Each command is represented by a json-object, the returned value is a json-array
2324 of all commands.
2325
2326 Each json-object contain:
2327
2328 - "name": command's name (json-string)
2329
2330 Example:
2331
2332 -> { "execute": "query-commands" }
2333 <- {
2334       "return":[
2335          {
2336             "name":"query-balloon"
2337          },
2338          {
2339             "name":"system_powerdown"
2340          }
2341       ]
2342    }
2343
2344 Note: This example has been shortened as the real response is too long.
2345
2346 EQMP
2347
2348     {
2349         .name       = "query-commands",
2350         .args_type  = "",
2351         .mhandler.cmd_new = qmp_marshal_query_commands,
2352     },
2353
2354 SQMP
2355 query-events
2356 --------------
2357
2358 List QMP available events.
2359
2360 Each event is represented by a json-object, the returned value is a json-array
2361 of all events.
2362
2363 Each json-object contains:
2364
2365 - "name": event's name (json-string)
2366
2367 Example:
2368
2369 -> { "execute": "query-events" }
2370 <- {
2371       "return":[
2372          {
2373             "name":"SHUTDOWN"
2374          },
2375          {
2376             "name":"RESET"
2377          }
2378       ]
2379    }
2380
2381 Note: This example has been shortened as the real response is too long.
2382
2383 EQMP
2384
2385     {
2386         .name       = "query-events",
2387         .args_type  = "",
2388         .mhandler.cmd_new = qmp_marshal_query_events,
2389     },
2390
2391 SQMP
2392 query-qmp-schema
2393 ----------------
2394
2395 Return the QMP wire schema.  The returned value is a json-array of
2396 named schema entities.  Entities are commands, events and various
2397 types.  See docs/qapi-code-gen.txt for information on their structure
2398 and intended use.
2399
2400 EQMP
2401
2402     {
2403         .name       = "query-qmp-schema",
2404         .args_type  = "",
2405         .mhandler.cmd_new = qmp_query_qmp_schema,
2406     },
2407
2408 SQMP
2409 query-chardev
2410 -------------
2411
2412 Each device is represented by a json-object. The returned value is a json-array
2413 of all devices.
2414
2415 Each json-object contain the following:
2416
2417 - "label": device's label (json-string)
2418 - "filename": device's file (json-string)
2419 - "frontend-open": open/closed state of the frontend device attached to this
2420                    backend (json-bool)
2421
2422 Example:
2423
2424 -> { "execute": "query-chardev" }
2425 <- {
2426       "return": [
2427          {
2428             "label": "charchannel0",
2429             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.agent,server",
2430             "frontend-open": false
2431          },
2432          {
2433             "label": "charmonitor",
2434             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.monitor,server",
2435             "frontend-open": true
2436          },
2437          {
2438             "label": "charserial0",
2439             "filename": "pty:/dev/pts/2",
2440             "frontend-open": true
2441          }
2442       ]
2443    }
2444
2445 EQMP
2446
2447     {
2448         .name       = "query-chardev",
2449         .args_type  = "",
2450         .mhandler.cmd_new = qmp_marshal_query_chardev,
2451     },
2452
2453 SQMP
2454 query-chardev-backends
2455 -------------
2456
2457 List available character device backends.
2458
2459 Each backend is represented by a json-object, the returned value is a json-array
2460 of all backends.
2461
2462 Each json-object contains:
2463
2464 - "name": backend name (json-string)
2465
2466 Example:
2467
2468 -> { "execute": "query-chardev-backends" }
2469 <- {
2470       "return":[
2471          {
2472             "name":"udp"
2473          },
2474          {
2475             "name":"tcp"
2476          },
2477          {
2478             "name":"unix"
2479          },
2480          {
2481             "name":"spiceport"
2482          }
2483       ]
2484    }
2485
2486 EQMP
2487
2488     {
2489         .name       = "query-chardev-backends",
2490         .args_type  = "",
2491         .mhandler.cmd_new = qmp_marshal_query_chardev_backends,
2492     },
2493
2494 SQMP
2495 query-block
2496 -----------
2497
2498 Show the block devices.
2499
2500 Each block device information is stored in a json-object and the returned value
2501 is a json-array of all devices.
2502
2503 Each json-object contain the following:
2504
2505 - "device": device name (json-string)
2506 - "type": device type (json-string)
2507          - deprecated, retained for backward compatibility
2508          - Possible values: "unknown"
2509 - "removable": true if the device is removable, false otherwise (json-bool)
2510 - "locked": true if the device is locked, false otherwise (json-bool)
2511 - "tray_open": only present if removable, true if the device has a tray,
2512                and it is open (json-bool)
2513 - "inserted": only present if the device is inserted, it is a json-object
2514    containing the following:
2515          - "file": device file name (json-string)
2516          - "ro": true if read-only, false otherwise (json-bool)
2517          - "drv": driver format name (json-string)
2518              - Possible values: "blkdebug", "bochs", "cloop", "dmg",
2519                                 "file", "file", "ftp", "ftps", "host_cdrom",
2520                                 "host_device", "http", "https",
2521                                 "nbd", "parallels", "qcow", "qcow2", "raw",
2522                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
2523          - "backing_file": backing file name (json-string, optional)
2524          - "backing_file_depth": number of files in the backing file chain (json-int)
2525          - "encrypted": true if encrypted, false otherwise (json-bool)
2526          - "bps": limit total bytes per second (json-int)
2527          - "bps_rd": limit read bytes per second (json-int)
2528          - "bps_wr": limit write bytes per second (json-int)
2529          - "iops": limit total I/O operations per second (json-int)
2530          - "iops_rd": limit read operations per second (json-int)
2531          - "iops_wr": limit write operations per second (json-int)
2532          - "bps_max":  total max in bytes (json-int)
2533          - "bps_rd_max":  read max in bytes (json-int)
2534          - "bps_wr_max":  write max in bytes (json-int)
2535          - "iops_max":  total I/O operations max (json-int)
2536          - "iops_rd_max":  read I/O operations max (json-int)
2537          - "iops_wr_max":  write I/O operations max (json-int)
2538          - "iops_size": I/O size when limiting by iops (json-int)
2539          - "detect_zeroes": detect and optimize zero writing (json-string)
2540              - Possible values: "off", "on", "unmap"
2541          - "write_threshold": write offset threshold in bytes, a event will be
2542                               emitted if crossed. Zero if disabled (json-int)
2543          - "image": the detail of the image, it is a json-object containing
2544             the following:
2545              - "filename": image file name (json-string)
2546              - "format": image format (json-string)
2547              - "virtual-size": image capacity in bytes (json-int)
2548              - "dirty-flag": true if image is not cleanly closed, not present
2549                              means clean (json-bool, optional)
2550              - "actual-size": actual size on disk in bytes of the image, not
2551                               present when image does not support thin
2552                               provision (json-int, optional)
2553              - "cluster-size": size of a cluster in bytes, not present if image
2554                                format does not support it (json-int, optional)
2555              - "encrypted": true if the image is encrypted, not present means
2556                             false or the image format does not support
2557                             encryption (json-bool, optional)
2558              - "backing_file": backing file name, not present means no backing
2559                                file is used or the image format does not
2560                                support backing file chain
2561                                (json-string, optional)
2562              - "full-backing-filename": full path of the backing file, not
2563                                         present if it equals backing_file or no
2564                                         backing file is used
2565                                         (json-string, optional)
2566              - "backing-filename-format": the format of the backing file, not
2567                                           present means unknown or no backing
2568                                           file (json-string, optional)
2569              - "snapshots": the internal snapshot info, it is an optional list
2570                 of json-object containing the following:
2571                  - "id": unique snapshot id (json-string)
2572                  - "name": snapshot name (json-string)
2573                  - "vm-state-size": size of the VM state in bytes (json-int)
2574                  - "date-sec": UTC date of the snapshot in seconds (json-int)
2575                  - "date-nsec": fractional part in nanoseconds to be used with
2576                                 date-sec (json-int)
2577                  - "vm-clock-sec": VM clock relative to boot in seconds
2578                                    (json-int)
2579                  - "vm-clock-nsec": fractional part in nanoseconds to be used
2580                                     with vm-clock-sec (json-int)
2581              - "backing-image": the detail of the backing image, it is an
2582                                 optional json-object only present when a
2583                                 backing image present for this image
2584
2585 - "io-status": I/O operation status, only present if the device supports it
2586                and the VM is configured to stop on errors. It's always reset
2587                to "ok" when the "cont" command is issued (json_string, optional)
2588              - Possible values: "ok", "failed", "nospace"
2589
2590 Example:
2591
2592 -> { "execute": "query-block" }
2593 <- {
2594       "return":[
2595          {
2596             "io-status": "ok",
2597             "device":"ide0-hd0",
2598             "locked":false,
2599             "removable":false,
2600             "inserted":{
2601                "ro":false,
2602                "drv":"qcow2",
2603                "encrypted":false,
2604                "file":"disks/test.qcow2",
2605                "backing_file_depth":1,
2606                "bps":1000000,
2607                "bps_rd":0,
2608                "bps_wr":0,
2609                "iops":1000000,
2610                "iops_rd":0,
2611                "iops_wr":0,
2612                "bps_max": 8000000,
2613                "bps_rd_max": 0,
2614                "bps_wr_max": 0,
2615                "iops_max": 0,
2616                "iops_rd_max": 0,
2617                "iops_wr_max": 0,
2618                "iops_size": 0,
2619                "detect_zeroes": "on",
2620                "write_threshold": 0,
2621                "image":{
2622                   "filename":"disks/test.qcow2",
2623                   "format":"qcow2",
2624                   "virtual-size":2048000,
2625                   "backing_file":"base.qcow2",
2626                   "full-backing-filename":"disks/base.qcow2",
2627                   "backing-filename-format":"qcow2",
2628                   "snapshots":[
2629                      {
2630                         "id": "1",
2631                         "name": "snapshot1",
2632                         "vm-state-size": 0,
2633                         "date-sec": 10000200,
2634                         "date-nsec": 12,
2635                         "vm-clock-sec": 206,
2636                         "vm-clock-nsec": 30
2637                      }
2638                   ],
2639                   "backing-image":{
2640                       "filename":"disks/base.qcow2",
2641                       "format":"qcow2",
2642                       "virtual-size":2048000
2643                   }
2644                }
2645             },
2646             "type":"unknown"
2647          },
2648          {
2649             "io-status": "ok",
2650             "device":"ide1-cd0",
2651             "locked":false,
2652             "removable":true,
2653             "type":"unknown"
2654          },
2655          {
2656             "device":"floppy0",
2657             "locked":false,
2658             "removable":true,
2659             "type":"unknown"
2660          },
2661          {
2662             "device":"sd0",
2663             "locked":false,
2664             "removable":true,
2665             "type":"unknown"
2666          }
2667       ]
2668    }
2669
2670 EQMP
2671
2672     {
2673         .name       = "query-block",
2674         .args_type  = "",
2675         .mhandler.cmd_new = qmp_marshal_query_block,
2676     },
2677
2678 SQMP
2679 query-blockstats
2680 ----------------
2681
2682 Show block device statistics.
2683
2684 Each device statistic information is stored in a json-object and the returned
2685 value is a json-array of all devices.
2686
2687 Each json-object contain the following:
2688
2689 - "device": device name (json-string)
2690 - "stats": A json-object with the statistics information, it contains:
2691     - "rd_bytes": bytes read (json-int)
2692     - "wr_bytes": bytes written (json-int)
2693     - "rd_operations": read operations (json-int)
2694     - "wr_operations": write operations (json-int)
2695     - "flush_operations": cache flush operations (json-int)
2696     - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int)
2697     - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int)
2698     - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int)
2699     - "wr_highest_offset": The offset after the greatest byte written to the
2700                            BlockDriverState since it has been opened (json-int)
2701     - "rd_merged": number of read requests that have been merged into
2702                    another request (json-int)
2703     - "wr_merged": number of write requests that have been merged into
2704                    another request (json-int)
2705     - "idle_time_ns": time since the last I/O operation, in
2706                       nanoseconds. If the field is absent it means
2707                       that there haven't been any operations yet
2708                       (json-int, optional)
2709     - "failed_rd_operations": number of failed read operations
2710                               (json-int)
2711     - "failed_wr_operations": number of failed write operations
2712                               (json-int)
2713     - "failed_flush_operations": number of failed flush operations
2714                                (json-int)
2715     - "invalid_rd_operations": number of invalid read operations
2716                                (json-int)
2717     - "invalid_wr_operations": number of invalid write operations
2718                                (json-int)
2719     - "invalid_flush_operations": number of invalid flush operations
2720                                   (json-int)
2721     - "account_invalid": whether invalid operations are included in
2722                          the last access statistics (json-bool)
2723     - "account_failed": whether failed operations are included in the
2724                          latency and last access statistics
2725                          (json-bool)
2726     - "timed_stats": A json-array containing statistics collected in
2727                      specific intervals, with the following members:
2728         - "interval_length": interval used for calculating the
2729                              statistics, in seconds (json-int)
2730         - "min_rd_latency_ns": minimum latency of read operations in
2731                                the defined interval, in nanoseconds
2732                                (json-int)
2733         - "min_wr_latency_ns": minimum latency of write operations in
2734                                the defined interval, in nanoseconds
2735                                (json-int)
2736         - "min_flush_latency_ns": minimum latency of flush operations
2737                                   in the defined interval, in
2738                                   nanoseconds (json-int)
2739         - "max_rd_latency_ns": maximum latency of read operations in
2740                                the defined interval, in nanoseconds
2741                                (json-int)
2742         - "max_wr_latency_ns": maximum latency of write operations in
2743                                the defined interval, in nanoseconds
2744                                (json-int)
2745         - "max_flush_latency_ns": maximum latency of flush operations
2746                                   in the defined interval, in
2747                                   nanoseconds (json-int)
2748         - "avg_rd_latency_ns": average latency of read operations in
2749                                the defined interval, in nanoseconds
2750                                (json-int)
2751         - "avg_wr_latency_ns": average latency of write operations in
2752                                the defined interval, in nanoseconds
2753                                (json-int)
2754         - "avg_flush_latency_ns": average latency of flush operations
2755                                   in the defined interval, in
2756                                   nanoseconds (json-int)
2757         - "avg_rd_queue_depth": average number of pending read
2758                                 operations in the defined interval
2759                                 (json-number)
2760         - "avg_wr_queue_depth": average number of pending write
2761                                 operations in the defined interval
2762                                 (json-number).
2763 - "parent": Contains recursively the statistics of the underlying
2764             protocol (e.g. the host file for a qcow2 image). If there is
2765             no underlying protocol, this field is omitted
2766             (json-object, optional)
2767
2768 Example:
2769
2770 -> { "execute": "query-blockstats" }
2771 <- {
2772       "return":[
2773          {
2774             "device":"ide0-hd0",
2775             "parent":{
2776                "stats":{
2777                   "wr_highest_offset":3686448128,
2778                   "wr_bytes":9786368,
2779                   "wr_operations":751,
2780                   "rd_bytes":122567168,
2781                   "rd_operations":36772
2782                   "wr_total_times_ns":313253456
2783                   "rd_total_times_ns":3465673657
2784                   "flush_total_times_ns":49653
2785                   "flush_operations":61,
2786                   "rd_merged":0,
2787                   "wr_merged":0,
2788                   "idle_time_ns":2953431879,
2789                   "account_invalid":true,
2790                   "account_failed":false
2791                }
2792             },
2793             "stats":{
2794                "wr_highest_offset":2821110784,
2795                "wr_bytes":9786368,
2796                "wr_operations":692,
2797                "rd_bytes":122739200,
2798                "rd_operations":36604
2799                "flush_operations":51,
2800                "wr_total_times_ns":313253456
2801                "rd_total_times_ns":3465673657
2802                "flush_total_times_ns":49653,
2803                "rd_merged":0,
2804                "wr_merged":0,
2805                "idle_time_ns":2953431879,
2806                "account_invalid":true,
2807                "account_failed":false
2808             }
2809          },
2810          {
2811             "device":"ide1-cd0",
2812             "stats":{
2813                "wr_highest_offset":0,
2814                "wr_bytes":0,
2815                "wr_operations":0,
2816                "rd_bytes":0,
2817                "rd_operations":0
2818                "flush_operations":0,
2819                "wr_total_times_ns":0
2820                "rd_total_times_ns":0
2821                "flush_total_times_ns":0,
2822                "rd_merged":0,
2823                "wr_merged":0,
2824                "account_invalid":false,
2825                "account_failed":false
2826             }
2827          },
2828          {
2829             "device":"floppy0",
2830             "stats":{
2831                "wr_highest_offset":0,
2832                "wr_bytes":0,
2833                "wr_operations":0,
2834                "rd_bytes":0,
2835                "rd_operations":0
2836                "flush_operations":0,
2837                "wr_total_times_ns":0
2838                "rd_total_times_ns":0
2839                "flush_total_times_ns":0,
2840                "rd_merged":0,
2841                "wr_merged":0,
2842                "account_invalid":false,
2843                "account_failed":false
2844             }
2845          },
2846          {
2847             "device":"sd0",
2848             "stats":{
2849                "wr_highest_offset":0,
2850                "wr_bytes":0,
2851                "wr_operations":0,
2852                "rd_bytes":0,
2853                "rd_operations":0
2854                "flush_operations":0,
2855                "wr_total_times_ns":0
2856                "rd_total_times_ns":0
2857                "flush_total_times_ns":0,
2858                "rd_merged":0,
2859                "wr_merged":0,
2860                "account_invalid":false,
2861                "account_failed":false
2862             }
2863          }
2864       ]
2865    }
2866
2867 EQMP
2868
2869     {
2870         .name       = "query-blockstats",
2871         .args_type  = "query-nodes:b?",
2872         .mhandler.cmd_new = qmp_marshal_query_blockstats,
2873     },
2874
2875 SQMP
2876 query-cpus
2877 ----------
2878
2879 Show CPU information.
2880
2881 Return a json-array. Each CPU is represented by a json-object, which contains:
2882
2883 - "CPU": CPU index (json-int)
2884 - "current": true if this is the current CPU, false otherwise (json-bool)
2885 - "halted": true if the cpu is halted, false otherwise (json-bool)
2886 - "qom_path": path to the CPU object in the QOM tree (json-str)
2887 - "arch": architecture of the cpu, which determines what additional
2888           keys will be present (json-str)
2889 - Current program counter. The key's name depends on the architecture:
2890      "pc": i386/x86_64 (json-int)
2891      "nip": PPC (json-int)
2892      "pc" and "npc": sparc (json-int)
2893      "PC": mips (json-int)
2894 - "thread_id": ID of the underlying host thread (json-int)
2895
2896 Example:
2897
2898 -> { "execute": "query-cpus" }
2899 <- {
2900       "return":[
2901          {
2902             "CPU":0,
2903             "current":true,
2904             "halted":false,
2905             "qom_path":"/machine/unattached/device[0]",
2906             "arch":"x86",
2907             "pc":3227107138,
2908             "thread_id":3134
2909          },
2910          {
2911             "CPU":1,
2912             "current":false,
2913             "halted":true,
2914             "qom_path":"/machine/unattached/device[2]",
2915             "arch":"x86",
2916             "pc":7108165,
2917             "thread_id":3135
2918          }
2919       ]
2920    }
2921
2922 EQMP
2923
2924     {
2925         .name       = "query-cpus",
2926         .args_type  = "",
2927         .mhandler.cmd_new = qmp_marshal_query_cpus,
2928     },
2929
2930 SQMP
2931 query-iothreads
2932 ---------------
2933
2934 Returns a list of information about each iothread.
2935
2936 Note this list excludes the QEMU main loop thread, which is not declared
2937 using the -object iothread command-line option.  It is always the main thread
2938 of the process.
2939
2940 Return a json-array. Each iothread is represented by a json-object, which contains:
2941
2942 - "id": name of iothread (json-str)
2943 - "thread-id": ID of the underlying host thread (json-int)
2944
2945 Example:
2946
2947 -> { "execute": "query-iothreads" }
2948 <- {
2949       "return":[
2950          {
2951             "id":"iothread0",
2952             "thread-id":3134
2953          },
2954          {
2955             "id":"iothread1",
2956             "thread-id":3135
2957          }
2958       ]
2959    }
2960
2961 EQMP
2962
2963     {
2964         .name       = "query-iothreads",
2965         .args_type  = "",
2966         .mhandler.cmd_new = qmp_marshal_query_iothreads,
2967     },
2968
2969 SQMP
2970 query-pci
2971 ---------
2972
2973 PCI buses and devices information.
2974
2975 The returned value is a json-array of all buses. Each bus is represented by
2976 a json-object, which has a key with a json-array of all PCI devices attached
2977 to it. Each device is represented by a json-object.
2978
2979 The bus json-object contains the following:
2980
2981 - "bus": bus number (json-int)
2982 - "devices": a json-array of json-objects, each json-object represents a
2983              PCI device
2984
2985 The PCI device json-object contains the following:
2986
2987 - "bus": identical to the parent's bus number (json-int)
2988 - "slot": slot number (json-int)
2989 - "function": function number (json-int)
2990 - "class_info": a json-object containing:
2991      - "desc": device class description (json-string, optional)
2992      - "class": device class number (json-int)
2993 - "id": a json-object containing:
2994      - "device": device ID (json-int)
2995      - "vendor": vendor ID (json-int)
2996 - "irq": device's IRQ if assigned (json-int, optional)
2997 - "qdev_id": qdev id string (json-string)
2998 - "pci_bridge": It's a json-object, only present if this device is a
2999                 PCI bridge, contains:
3000      - "bus": bus number (json-int)
3001      - "secondary": secondary bus number (json-int)
3002      - "subordinate": subordinate bus number (json-int)
3003      - "io_range": I/O memory range information, a json-object with the
3004                    following members:
3005                  - "base": base address, in bytes (json-int)
3006                  - "limit": limit address, in bytes (json-int)
3007      - "memory_range": memory range information, a json-object with the
3008                        following members:
3009                  - "base": base address, in bytes (json-int)
3010                  - "limit": limit address, in bytes (json-int)
3011      - "prefetchable_range": Prefetchable memory range information, a
3012                              json-object with the following members:
3013                  - "base": base address, in bytes (json-int)
3014                  - "limit": limit address, in bytes (json-int)
3015      - "devices": a json-array of PCI devices if there's any attached, each
3016                   each element is represented by a json-object, which contains
3017                   the same members of the 'PCI device json-object' described
3018                   above (optional)
3019 - "regions": a json-array of json-objects, each json-object represents a
3020              memory region of this device
3021
3022 The memory range json-object contains the following:
3023
3024 - "base": base memory address (json-int)
3025 - "limit": limit value (json-int)
3026
3027 The region json-object can be an I/O region or a memory region, an I/O region
3028 json-object contains the following:
3029
3030 - "type": "io" (json-string, fixed)
3031 - "bar": BAR number (json-int)
3032 - "address": memory address (json-int)
3033 - "size": memory size (json-int)
3034
3035 A memory region json-object contains the following:
3036
3037 - "type": "memory" (json-string, fixed)
3038 - "bar": BAR number (json-int)
3039 - "address": memory address (json-int)
3040 - "size": memory size (json-int)
3041 - "mem_type_64": true or false (json-bool)
3042 - "prefetch": true or false (json-bool)
3043
3044 Example:
3045
3046 -> { "execute": "query-pci" }
3047 <- {
3048       "return":[
3049          {
3050             "bus":0,
3051             "devices":[
3052                {
3053                   "bus":0,
3054                   "qdev_id":"",
3055                   "slot":0,
3056                   "class_info":{
3057                      "class":1536,
3058                      "desc":"Host bridge"
3059                   },
3060                   "id":{
3061                      "device":32902,
3062                      "vendor":4663
3063                   },
3064                   "function":0,
3065                   "regions":[
3066
3067                   ]
3068                },
3069                {
3070                   "bus":0,
3071                   "qdev_id":"",
3072                   "slot":1,
3073                   "class_info":{
3074                      "class":1537,
3075                      "desc":"ISA bridge"
3076                   },
3077                   "id":{
3078                      "device":32902,
3079                      "vendor":28672
3080                   },
3081                   "function":0,
3082                   "regions":[
3083
3084                   ]
3085                },
3086                {
3087                   "bus":0,
3088                   "qdev_id":"",
3089                   "slot":1,
3090                   "class_info":{
3091                      "class":257,
3092                      "desc":"IDE controller"
3093                   },
3094                   "id":{
3095                      "device":32902,
3096                      "vendor":28688
3097                   },
3098                   "function":1,
3099                   "regions":[
3100                      {
3101                         "bar":4,
3102                         "size":16,
3103                         "address":49152,
3104                         "type":"io"
3105                      }
3106                   ]
3107                },
3108                {
3109                   "bus":0,
3110                   "qdev_id":"",
3111                   "slot":2,
3112                   "class_info":{
3113                      "class":768,
3114                      "desc":"VGA controller"
3115                   },
3116                   "id":{
3117                      "device":4115,
3118                      "vendor":184
3119                   },
3120                   "function":0,
3121                   "regions":[
3122                      {
3123                         "prefetch":true,
3124                         "mem_type_64":false,
3125                         "bar":0,
3126                         "size":33554432,
3127                         "address":4026531840,
3128                         "type":"memory"
3129                      },
3130                      {
3131                         "prefetch":false,
3132                         "mem_type_64":false,
3133                         "bar":1,
3134                         "size":4096,
3135                         "address":4060086272,
3136                         "type":"memory"
3137                      },
3138                      {
3139                         "prefetch":false,
3140                         "mem_type_64":false,
3141                         "bar":6,
3142                         "size":65536,
3143                         "address":-1,
3144                         "type":"memory"
3145                      }
3146                   ]
3147                },
3148                {
3149                   "bus":0,
3150                   "qdev_id":"",
3151                   "irq":11,
3152                   "slot":4,
3153                   "class_info":{
3154                      "class":1280,
3155                      "desc":"RAM controller"
3156                   },
3157                   "id":{
3158                      "device":6900,
3159                      "vendor":4098
3160                   },
3161                   "function":0,
3162                   "regions":[
3163                      {
3164                         "bar":0,
3165                         "size":32,
3166                         "address":49280,
3167                         "type":"io"
3168                      }
3169                   ]
3170                }
3171             ]
3172          }
3173       ]
3174    }
3175
3176 Note: This example has been shortened as the real response is too long.
3177
3178 EQMP
3179
3180     {
3181         .name       = "query-pci",
3182         .args_type  = "",
3183         .mhandler.cmd_new = qmp_marshal_query_pci,
3184     },
3185
3186 SQMP
3187 query-kvm
3188 ---------
3189
3190 Show KVM information.
3191
3192 Return a json-object with the following information:
3193
3194 - "enabled": true if KVM support is enabled, false otherwise (json-bool)
3195 - "present": true if QEMU has KVM support, false otherwise (json-bool)
3196
3197 Example:
3198
3199 -> { "execute": "query-kvm" }
3200 <- { "return": { "enabled": true, "present": true } }
3201
3202 EQMP
3203
3204     {
3205         .name       = "query-kvm",
3206         .args_type  = "",
3207         .mhandler.cmd_new = qmp_marshal_query_kvm,
3208     },
3209
3210 SQMP
3211 query-status
3212 ------------
3213
3214 Return a json-object with the following information:
3215
3216 - "running": true if the VM is running, or false if it is paused (json-bool)
3217 - "singlestep": true if the VM is in single step mode,
3218                 false otherwise (json-bool)
3219 - "status": one of the following values (json-string)
3220     "debug" - QEMU is running on a debugger
3221     "inmigrate" - guest is paused waiting for an incoming migration
3222     "internal-error" - An internal error that prevents further guest
3223     execution has occurred
3224     "io-error" - the last IOP has failed and the device is configured
3225     to pause on I/O errors
3226     "paused" - guest has been paused via the 'stop' command
3227     "postmigrate" - guest is paused following a successful 'migrate'
3228     "prelaunch" - QEMU was started with -S and guest has not started
3229     "finish-migrate" - guest is paused to finish the migration process
3230     "restore-vm" - guest is paused to restore VM state
3231     "running" - guest is actively running
3232     "save-vm" - guest is paused to save the VM state
3233     "shutdown" - guest is shut down (and -no-shutdown is in use)
3234     "watchdog" - the watchdog action is configured to pause and
3235      has been triggered
3236
3237 Example:
3238
3239 -> { "execute": "query-status" }
3240 <- { "return": { "running": true, "singlestep": false, "status": "running" } }
3241
3242 EQMP
3243
3244     {
3245         .name       = "query-status",
3246         .args_type  = "",
3247         .mhandler.cmd_new = qmp_marshal_query_status,
3248     },
3249
3250 SQMP
3251 query-mice
3252 ----------
3253
3254 Show VM mice information.
3255
3256 Each mouse is represented by a json-object, the returned value is a json-array
3257 of all mice.
3258
3259 The mouse json-object contains the following:
3260
3261 - "name": mouse's name (json-string)
3262 - "index": mouse's index (json-int)
3263 - "current": true if this mouse is receiving events, false otherwise (json-bool)
3264 - "absolute": true if the mouse generates absolute input events (json-bool)
3265
3266 Example:
3267
3268 -> { "execute": "query-mice" }
3269 <- {
3270       "return":[
3271          {
3272             "name":"QEMU Microsoft Mouse",
3273             "index":0,
3274             "current":false,
3275             "absolute":false
3276          },
3277          {
3278             "name":"QEMU PS/2 Mouse",
3279             "index":1,
3280             "current":true,
3281             "absolute":true
3282          }
3283       ]
3284    }
3285
3286 EQMP
3287
3288     {
3289         .name       = "query-mice",
3290         .args_type  = "",
3291         .mhandler.cmd_new = qmp_marshal_query_mice,
3292     },
3293
3294 SQMP
3295 query-vnc
3296 ---------
3297
3298 Show VNC server information.
3299
3300 Return a json-object with server information. Connected clients are returned
3301 as a json-array of json-objects.
3302
3303 The main json-object contains the following:
3304
3305 - "enabled": true or false (json-bool)
3306 - "host": server's IP address (json-string)
3307 - "family": address family (json-string)
3308          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3309 - "service": server's port number (json-string)
3310 - "auth": authentication method (json-string)
3311          - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight",
3312                             "tls", "ultra", "unknown", "vencrypt", "vencrypt",
3313                             "vencrypt+plain", "vencrypt+tls+none",
3314                             "vencrypt+tls+plain", "vencrypt+tls+sasl",
3315                             "vencrypt+tls+vnc", "vencrypt+x509+none",
3316                             "vencrypt+x509+plain", "vencrypt+x509+sasl",
3317                             "vencrypt+x509+vnc", "vnc"
3318 - "clients": a json-array of all connected clients
3319
3320 Clients are described by a json-object, each one contain the following:
3321
3322 - "host": client's IP address (json-string)
3323 - "family": address family (json-string)
3324          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3325 - "service": client's port number (json-string)
3326 - "x509_dname": TLS dname (json-string, optional)
3327 - "sasl_username": SASL username (json-string, optional)
3328
3329 Example:
3330
3331 -> { "execute": "query-vnc" }
3332 <- {
3333       "return":{
3334          "enabled":true,
3335          "host":"0.0.0.0",
3336          "service":"50402",
3337          "auth":"vnc",
3338          "family":"ipv4",
3339          "clients":[
3340             {
3341                "host":"127.0.0.1",
3342                "service":"50401",
3343                "family":"ipv4"
3344             }
3345          ]
3346       }
3347    }
3348
3349 EQMP
3350
3351     {
3352         .name       = "query-vnc",
3353         .args_type  = "",
3354         .mhandler.cmd_new = qmp_marshal_query_vnc,
3355     },
3356     {
3357         .name       = "query-vnc-servers",
3358         .args_type  = "",
3359         .mhandler.cmd_new = qmp_marshal_query_vnc_servers,
3360     },
3361
3362 SQMP
3363 query-spice
3364 -----------
3365
3366 Show SPICE server information.
3367
3368 Return a json-object with server information. Connected clients are returned
3369 as a json-array of json-objects.
3370
3371 The main json-object contains the following:
3372
3373 - "enabled": true or false (json-bool)
3374 - "host": server's IP address (json-string)
3375 - "port": server's port number (json-int, optional)
3376 - "tls-port": server's port number (json-int, optional)
3377 - "auth": authentication method (json-string)
3378          - Possible values: "none", "spice"
3379 - "channels": a json-array of all active channels clients
3380
3381 Channels are described by a json-object, each one contain the following:
3382
3383 - "host": client's IP address (json-string)
3384 - "family": address family (json-string)
3385          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3386 - "port": client's port number (json-string)
3387 - "connection-id": spice connection id.  All channels with the same id
3388                    belong to the same spice session (json-int)
3389 - "channel-type": channel type.  "1" is the main control channel, filter for
3390                   this one if you want track spice sessions only (json-int)
3391 - "channel-id": channel id.  Usually "0", might be different needed when
3392                 multiple channels of the same type exist, such as multiple
3393                 display channels in a multihead setup (json-int)
3394 - "tls": whether the channel is encrypted (json-bool)
3395
3396 Example:
3397
3398 -> { "execute": "query-spice" }
3399 <- {
3400       "return": {
3401          "enabled": true,
3402          "auth": "spice",
3403          "port": 5920,
3404          "tls-port": 5921,
3405          "host": "0.0.0.0",
3406          "channels": [
3407             {
3408                "port": "54924",
3409                "family": "ipv4",
3410                "channel-type": 1,
3411                "connection-id": 1804289383,
3412                "host": "127.0.0.1",
3413                "channel-id": 0,
3414                "tls": true
3415             },
3416             {
3417                "port": "36710",
3418                "family": "ipv4",
3419                "channel-type": 4,
3420                "connection-id": 1804289383,
3421                "host": "127.0.0.1",
3422                "channel-id": 0,
3423                "tls": false
3424             },
3425             [ ... more channels follow ... ]
3426          ]
3427       }
3428    }
3429
3430 EQMP
3431
3432 #if defined(CONFIG_SPICE)
3433     {
3434         .name       = "query-spice",
3435         .args_type  = "",
3436         .mhandler.cmd_new = qmp_marshal_query_spice,
3437     },
3438 #endif
3439
3440 SQMP
3441 query-name
3442 ----------
3443
3444 Show VM name.
3445
3446 Return a json-object with the following information:
3447
3448 - "name": VM's name (json-string, optional)
3449
3450 Example:
3451
3452 -> { "execute": "query-name" }
3453 <- { "return": { "name": "qemu-name" } }
3454
3455 EQMP
3456
3457     {
3458         .name       = "query-name",
3459         .args_type  = "",
3460         .mhandler.cmd_new = qmp_marshal_query_name,
3461     },
3462
3463 SQMP
3464 query-uuid
3465 ----------
3466
3467 Show VM UUID.
3468
3469 Return a json-object with the following information:
3470
3471 - "UUID": Universally Unique Identifier (json-string)
3472
3473 Example:
3474
3475 -> { "execute": "query-uuid" }
3476 <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
3477
3478 EQMP
3479
3480     {
3481         .name       = "query-uuid",
3482         .args_type  = "",
3483         .mhandler.cmd_new = qmp_marshal_query_uuid,
3484     },
3485
3486 SQMP
3487 query-command-line-options
3488 --------------------------
3489
3490 Show command line option schema.
3491
3492 Return a json-array of command line option schema for all options (or for
3493 the given option), returning an error if the given option doesn't exist.
3494
3495 Each array entry contains the following:
3496
3497 - "option": option name (json-string)
3498 - "parameters": a json-array describes all parameters of the option:
3499     - "name": parameter name (json-string)
3500     - "type": parameter type (one of 'string', 'boolean', 'number',
3501               or 'size')
3502     - "help": human readable description of the parameter
3503               (json-string, optional)
3504     - "default": default value string for the parameter
3505                  (json-string, optional)
3506
3507 Example:
3508
3509 -> { "execute": "query-command-line-options", "arguments": { "option": "option-rom" } }
3510 <- { "return": [
3511         {
3512             "parameters": [
3513                 {
3514                     "name": "romfile",
3515                     "type": "string"
3516                 },
3517                 {
3518                     "name": "bootindex",
3519                     "type": "number"
3520                 }
3521             ],
3522             "option": "option-rom"
3523         }
3524      ]
3525    }
3526
3527 EQMP
3528
3529     {
3530         .name       = "query-command-line-options",
3531         .args_type  = "option:s?",
3532         .mhandler.cmd_new = qmp_marshal_query_command_line_options,
3533     },
3534
3535 SQMP
3536 query-migrate
3537 -------------
3538
3539 Migration status.
3540
3541 Return a json-object. If migration is active there will be another json-object
3542 with RAM migration status and if block migration is active another one with
3543 block migration status.
3544
3545 The main json-object contains the following:
3546
3547 - "status": migration status (json-string)
3548      - Possible values: "setup", "active", "completed", "failed", "cancelled"
3549 - "total-time": total amount of ms since migration started.  If
3550                 migration has ended, it returns the total migration
3551                 time (json-int)
3552 - "setup-time" amount of setup time in milliseconds _before_ the
3553                iterations begin but _after_ the QMP command is issued.
3554                This is designed to provide an accounting of any activities
3555                (such as RDMA pinning) which may be expensive, but do not
3556                actually occur during the iterative migration rounds
3557                themselves. (json-int)
3558 - "downtime": only present when migration has finished correctly
3559               total amount in ms for downtime that happened (json-int)
3560 - "expected-downtime": only present while migration is active
3561                 total amount in ms for downtime that was calculated on
3562                 the last bitmap round (json-int)
3563 - "ram": only present if "status" is "active", it is a json-object with the
3564   following RAM information:
3565          - "transferred": amount transferred in bytes (json-int)
3566          - "remaining": amount remaining to transfer in bytes (json-int)
3567          - "total": total amount of memory in bytes (json-int)
3568          - "duplicate": number of pages filled entirely with the same
3569             byte (json-int)
3570             These are sent over the wire much more efficiently.
3571          - "skipped": number of skipped zero pages (json-int)
3572          - "normal" : number of whole pages transferred.  I.e. they
3573             were not sent as duplicate or xbzrle pages (json-int)
3574          - "normal-bytes" : number of bytes transferred in whole
3575             pages. This is just normal pages times size of one page,
3576             but this way upper levels don't need to care about page
3577             size (json-int)
3578          - "dirty-sync-count": times that dirty ram was synchronized (json-int)
3579 - "disk": only present if "status" is "active" and it is a block migration,
3580   it is a json-object with the following disk information:
3581          - "transferred": amount transferred in bytes (json-int)
3582          - "remaining": amount remaining to transfer in bytes json-int)
3583          - "total": total disk size in bytes (json-int)
3584 - "xbzrle-cache": only present if XBZRLE is active.
3585   It is a json-object with the following XBZRLE information:
3586          - "cache-size": XBZRLE cache size in bytes
3587          - "bytes": number of bytes transferred for XBZRLE compressed pages
3588          - "pages": number of XBZRLE compressed pages
3589          - "cache-miss": number of XBRZRLE page cache misses
3590          - "cache-miss-rate": rate of XBRZRLE page cache misses
3591          - "overflow": number of times XBZRLE overflows.  This means
3592            that the XBZRLE encoding was bigger than just sent the
3593            whole page, and then we sent the whole page instead (as as
3594            normal page).
3595
3596 Examples:
3597
3598 1. Before the first migration
3599
3600 -> { "execute": "query-migrate" }
3601 <- { "return": {} }
3602
3603 2. Migration is done and has succeeded
3604
3605 -> { "execute": "query-migrate" }
3606 <- { "return": {
3607         "status": "completed",
3608         "ram":{
3609           "transferred":123,
3610           "remaining":123,
3611           "total":246,
3612           "total-time":12345,
3613           "setup-time":12345,
3614           "downtime":12345,
3615           "duplicate":123,
3616           "normal":123,
3617           "normal-bytes":123456,
3618           "dirty-sync-count":15
3619         }
3620      }
3621    }
3622
3623 3. Migration is done and has failed
3624
3625 -> { "execute": "query-migrate" }
3626 <- { "return": { "status": "failed" } }
3627
3628 4. Migration is being performed and is not a block migration:
3629
3630 -> { "execute": "query-migrate" }
3631 <- {
3632       "return":{
3633          "status":"active",
3634          "ram":{
3635             "transferred":123,
3636             "remaining":123,
3637             "total":246,
3638             "total-time":12345,
3639             "setup-time":12345,
3640             "expected-downtime":12345,
3641             "duplicate":123,
3642             "normal":123,
3643             "normal-bytes":123456,
3644             "dirty-sync-count":15
3645          }
3646       }
3647    }
3648
3649 5. Migration is being performed and is a block migration:
3650
3651 -> { "execute": "query-migrate" }
3652 <- {
3653       "return":{
3654          "status":"active",
3655          "ram":{
3656             "total":1057024,
3657             "remaining":1053304,
3658             "transferred":3720,
3659             "total-time":12345,
3660             "setup-time":12345,
3661             "expected-downtime":12345,
3662             "duplicate":123,
3663             "normal":123,
3664             "normal-bytes":123456,
3665             "dirty-sync-count":15
3666          },
3667          "disk":{
3668             "total":20971520,
3669             "remaining":20880384,
3670             "transferred":91136
3671          }
3672       }
3673    }
3674
3675 6. Migration is being performed and XBZRLE is active:
3676
3677 -> { "execute": "query-migrate" }
3678 <- {
3679       "return":{
3680          "status":"active",
3681          "capabilities" : [ { "capability": "xbzrle", "state" : true } ],
3682          "ram":{
3683             "total":1057024,
3684             "remaining":1053304,
3685             "transferred":3720,
3686             "total-time":12345,
3687             "setup-time":12345,
3688             "expected-downtime":12345,
3689             "duplicate":10,
3690             "normal":3333,
3691             "normal-bytes":3412992,
3692             "dirty-sync-count":15
3693          },
3694          "xbzrle-cache":{
3695             "cache-size":67108864,
3696             "bytes":20971520,
3697             "pages":2444343,
3698             "cache-miss":2244,
3699             "cache-miss-rate":0.123,
3700             "overflow":34434
3701          }
3702       }
3703    }
3704
3705 EQMP
3706
3707     {
3708         .name       = "query-migrate",
3709         .args_type  = "",
3710         .mhandler.cmd_new = qmp_marshal_query_migrate,
3711     },
3712
3713 SQMP
3714 migrate-set-capabilities
3715 ------------------------
3716
3717 Enable/Disable migration capabilities
3718
3719 - "xbzrle": XBZRLE support
3720 - "rdma-pin-all": pin all pages when using RDMA during migration
3721 - "auto-converge": throttle down guest to help convergence of migration
3722 - "zero-blocks": compress zero blocks during block migration
3723 - "compress": use multiple compression threads to accelerate live migration
3724 - "events": generate events for each migration state change
3725 - "postcopy-ram": postcopy mode for live migration
3726
3727 Arguments:
3728
3729 Example:
3730
3731 -> { "execute": "migrate-set-capabilities" , "arguments":
3732      { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
3733
3734 EQMP
3735
3736     {
3737         .name       = "migrate-set-capabilities",
3738         .args_type  = "capabilities:q",
3739         .params     = "capability:s,state:b",
3740         .mhandler.cmd_new = qmp_marshal_migrate_set_capabilities,
3741     },
3742 SQMP
3743 query-migrate-capabilities
3744 --------------------------
3745
3746 Query current migration capabilities
3747
3748 - "capabilities": migration capabilities state
3749          - "xbzrle" : XBZRLE state (json-bool)
3750          - "rdma-pin-all" : RDMA Pin Page state (json-bool)
3751          - "auto-converge" : Auto Converge state (json-bool)
3752          - "zero-blocks" : Zero Blocks state (json-bool)
3753          - "compress": Multiple compression threads state (json-bool)
3754          - "events": Migration state change event state (json-bool)
3755          - "postcopy-ram": postcopy ram state (json-bool)
3756
3757 Arguments:
3758
3759 Example:
3760
3761 -> { "execute": "query-migrate-capabilities" }
3762 <- {"return": [
3763      {"state": false, "capability": "xbzrle"},
3764      {"state": false, "capability": "rdma-pin-all"},
3765      {"state": false, "capability": "auto-converge"},
3766      {"state": false, "capability": "zero-blocks"},
3767      {"state": false, "capability": "compress"},
3768      {"state": true, "capability": "events"},
3769      {"state": false, "capability": "postcopy-ram"}
3770    ]}
3771
3772 EQMP
3773
3774     {
3775         .name       = "query-migrate-capabilities",
3776         .args_type  = "",
3777         .mhandler.cmd_new = qmp_marshal_query_migrate_capabilities,
3778     },
3779
3780 SQMP
3781 migrate-set-parameters
3782 ----------------------
3783
3784 Set migration parameters
3785
3786 - "compress-level": set compression level during migration (json-int)
3787 - "compress-threads": set compression thread count for migration (json-int)
3788 - "decompress-threads": set decompression thread count for migration (json-int)
3789 - "cpu-throttle-initial": set initial percentage of time guest cpus are
3790                           throttled for auto-converge (json-int)
3791 - "cpu-throttle-increment": set throttle increasing percentage for
3792                             auto-converge (json-int)
3793
3794 Arguments:
3795
3796 Example:
3797
3798 -> { "execute": "migrate-set-parameters" , "arguments":
3799       { "compress-level": 1 } }
3800
3801 EQMP
3802
3803     {
3804         .name       = "migrate-set-parameters",
3805         .args_type  =
3806             "compress-level:i?,compress-threads:i?,decompress-threads:i?,cpu-throttle-initial:i?,cpu-throttle-increment:i?",
3807         .mhandler.cmd_new = qmp_marshal_migrate_set_parameters,
3808     },
3809 SQMP
3810 query-migrate-parameters
3811 ------------------------
3812
3813 Query current migration parameters
3814
3815 - "parameters": migration parameters value
3816          - "compress-level" : compression level value (json-int)
3817          - "compress-threads" : compression thread count value (json-int)
3818          - "decompress-threads" : decompression thread count value (json-int)
3819          - "cpu-throttle-initial" : initial percentage of time guest cpus are
3820                                     throttled (json-int)
3821          - "cpu-throttle-increment" : throttle increasing percentage for
3822                                       auto-converge (json-int)
3823
3824 Arguments:
3825
3826 Example:
3827
3828 -> { "execute": "query-migrate-parameters" }
3829 <- {
3830       "return": {
3831          "decompress-threads": 2,
3832          "cpu-throttle-increment": 10,
3833          "compress-threads": 8,
3834          "compress-level": 1,
3835          "cpu-throttle-initial": 20
3836       }
3837    }
3838
3839 EQMP
3840
3841     {
3842         .name       = "query-migrate-parameters",
3843         .args_type  = "",
3844         .mhandler.cmd_new = qmp_marshal_query_migrate_parameters,
3845     },
3846
3847 SQMP
3848 query-balloon
3849 -------------
3850
3851 Show balloon information.
3852
3853 Make an asynchronous request for balloon info. When the request completes a
3854 json-object will be returned containing the following data:
3855
3856 - "actual": current balloon value in bytes (json-int)
3857
3858 Example:
3859
3860 -> { "execute": "query-balloon" }
3861 <- {
3862       "return":{
3863          "actual":1073741824,
3864       }
3865    }
3866
3867 EQMP
3868
3869     {
3870         .name       = "query-balloon",
3871         .args_type  = "",
3872         .mhandler.cmd_new = qmp_marshal_query_balloon,
3873     },
3874
3875     {
3876         .name       = "query-block-jobs",
3877         .args_type  = "",
3878         .mhandler.cmd_new = qmp_marshal_query_block_jobs,
3879     },
3880
3881     {
3882         .name       = "qom-list",
3883         .args_type  = "path:s",
3884         .mhandler.cmd_new = qmp_marshal_qom_list,
3885     },
3886
3887     {
3888         .name       = "qom-set",
3889         .args_type  = "path:s,property:s,value:q",
3890         .mhandler.cmd_new = qmp_marshal_qom_set,
3891     },
3892
3893     {
3894         .name       = "qom-get",
3895         .args_type  = "path:s,property:s",
3896         .mhandler.cmd_new = qmp_marshal_qom_get,
3897     },
3898
3899     {
3900         .name       = "nbd-server-start",
3901         .args_type  = "addr:q,tls-creds:s?",
3902         .mhandler.cmd_new = qmp_marshal_nbd_server_start,
3903     },
3904     {
3905         .name       = "nbd-server-add",
3906         .args_type  = "device:B,writable:b?",
3907         .mhandler.cmd_new = qmp_marshal_nbd_server_add,
3908     },
3909     {
3910         .name       = "nbd-server-stop",
3911         .args_type  = "",
3912         .mhandler.cmd_new = qmp_marshal_nbd_server_stop,
3913     },
3914
3915     {
3916         .name       = "change-vnc-password",
3917         .args_type  = "password:s",
3918         .mhandler.cmd_new = qmp_marshal_change_vnc_password,
3919     },
3920     {
3921         .name       = "qom-list-types",
3922         .args_type  = "implements:s?,abstract:b?",
3923         .mhandler.cmd_new = qmp_marshal_qom_list_types,
3924     },
3925
3926     {
3927         .name       = "device-list-properties",
3928         .args_type  = "typename:s",
3929         .mhandler.cmd_new = qmp_marshal_device_list_properties,
3930     },
3931
3932     {
3933         .name       = "query-machines",
3934         .args_type  = "",
3935         .mhandler.cmd_new = qmp_marshal_query_machines,
3936     },
3937
3938     {
3939         .name       = "query-cpu-definitions",
3940         .args_type  = "",
3941         .mhandler.cmd_new = qmp_marshal_query_cpu_definitions,
3942     },
3943
3944     {
3945         .name       = "query-target",
3946         .args_type  = "",
3947         .mhandler.cmd_new = qmp_marshal_query_target,
3948     },
3949
3950     {
3951         .name       = "query-tpm",
3952         .args_type  = "",
3953         .mhandler.cmd_new = qmp_marshal_query_tpm,
3954     },
3955
3956 SQMP
3957 query-tpm
3958 ---------
3959
3960 Return information about the TPM device.
3961
3962 Arguments: None
3963
3964 Example:
3965
3966 -> { "execute": "query-tpm" }
3967 <- { "return":
3968      [
3969        { "model": "tpm-tis",
3970          "options":
3971            { "type": "passthrough",
3972              "data":
3973                { "cancel-path": "/sys/class/misc/tpm0/device/cancel",
3974                  "path": "/dev/tpm0"
3975                }
3976            },
3977          "id": "tpm0"
3978        }
3979      ]
3980    }
3981
3982 EQMP
3983
3984     {
3985         .name       = "query-tpm-models",
3986         .args_type  = "",
3987         .mhandler.cmd_new = qmp_marshal_query_tpm_models,
3988     },
3989
3990 SQMP
3991 query-tpm-models
3992 ----------------
3993
3994 Return a list of supported TPM models.
3995
3996 Arguments: None
3997
3998 Example:
3999
4000 -> { "execute": "query-tpm-models" }
4001 <- { "return": [ "tpm-tis" ] }
4002
4003 EQMP
4004
4005     {
4006         .name       = "query-tpm-types",
4007         .args_type  = "",
4008         .mhandler.cmd_new = qmp_marshal_query_tpm_types,
4009     },
4010
4011 SQMP
4012 query-tpm-types
4013 ---------------
4014
4015 Return a list of supported TPM types.
4016
4017 Arguments: None
4018
4019 Example:
4020
4021 -> { "execute": "query-tpm-types" }
4022 <- { "return": [ "passthrough" ] }
4023
4024 EQMP
4025
4026     {
4027         .name       = "chardev-add",
4028         .args_type  = "id:s,backend:q",
4029         .mhandler.cmd_new = qmp_marshal_chardev_add,
4030     },
4031
4032 SQMP
4033 chardev-add
4034 ----------------
4035
4036 Add a chardev.
4037
4038 Arguments:
4039
4040 - "id": the chardev's ID, must be unique (json-string)
4041 - "backend": chardev backend type + parameters
4042
4043 Examples:
4044
4045 -> { "execute" : "chardev-add",
4046      "arguments" : { "id" : "foo",
4047                      "backend" : { "type" : "null", "data" : {} } } }
4048 <- { "return": {} }
4049
4050 -> { "execute" : "chardev-add",
4051      "arguments" : { "id" : "bar",
4052                      "backend" : { "type" : "file",
4053                                    "data" : { "out" : "/tmp/bar.log" } } } }
4054 <- { "return": {} }
4055
4056 -> { "execute" : "chardev-add",
4057      "arguments" : { "id" : "baz",
4058                      "backend" : { "type" : "pty", "data" : {} } } }
4059 <- { "return": { "pty" : "/dev/pty/42" } }
4060
4061 EQMP
4062
4063     {
4064         .name       = "chardev-remove",
4065         .args_type  = "id:s",
4066         .mhandler.cmd_new = qmp_marshal_chardev_remove,
4067     },
4068
4069
4070 SQMP
4071 chardev-remove
4072 --------------
4073
4074 Remove a chardev.
4075
4076 Arguments:
4077
4078 - "id": the chardev's ID, must exist and not be in use (json-string)
4079
4080 Example:
4081
4082 -> { "execute": "chardev-remove", "arguments": { "id" : "foo" } }
4083 <- { "return": {} }
4084
4085 EQMP
4086     {
4087         .name       = "query-rx-filter",
4088         .args_type  = "name:s?",
4089         .mhandler.cmd_new = qmp_marshal_query_rx_filter,
4090     },
4091
4092 SQMP
4093 query-rx-filter
4094 ---------------
4095
4096 Show rx-filter information.
4097
4098 Returns a json-array of rx-filter information for all NICs (or for the
4099 given NIC), returning an error if the given NIC doesn't exist, or
4100 given NIC doesn't support rx-filter querying, or given net client
4101 isn't a NIC.
4102
4103 The query will clear the event notification flag of each NIC, then qemu
4104 will start to emit event to QMP monitor.
4105
4106 Each array entry contains the following:
4107
4108 - "name": net client name (json-string)
4109 - "promiscuous": promiscuous mode is enabled (json-bool)
4110 - "multicast": multicast receive state (one of 'normal', 'none', 'all')
4111 - "unicast": unicast receive state  (one of 'normal', 'none', 'all')
4112 - "vlan": vlan receive state (one of 'normal', 'none', 'all') (Since 2.0)
4113 - "broadcast-allowed": allow to receive broadcast (json-bool)
4114 - "multicast-overflow": multicast table is overflowed (json-bool)
4115 - "unicast-overflow": unicast table is overflowed (json-bool)
4116 - "main-mac": main macaddr string (json-string)
4117 - "vlan-table": a json-array of active vlan id
4118 - "unicast-table": a json-array of unicast macaddr string
4119 - "multicast-table": a json-array of multicast macaddr string
4120
4121 Example:
4122
4123 -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } }
4124 <- { "return": [
4125         {
4126             "promiscuous": true,
4127             "name": "vnet0",
4128             "main-mac": "52:54:00:12:34:56",
4129             "unicast": "normal",
4130             "vlan": "normal",
4131             "vlan-table": [
4132                 4,
4133                 0
4134             ],
4135             "unicast-table": [
4136             ],
4137             "multicast": "normal",
4138             "multicast-overflow": false,
4139             "unicast-overflow": false,
4140             "multicast-table": [
4141                 "01:00:5e:00:00:01",
4142                 "33:33:00:00:00:01",
4143                 "33:33:ff:12:34:56"
4144             ],
4145             "broadcast-allowed": false
4146         }
4147       ]
4148    }
4149
4150 EQMP
4151
4152     {
4153         .name       = "blockdev-add",
4154         .args_type  = "options:q",
4155         .mhandler.cmd_new = qmp_marshal_blockdev_add,
4156     },
4157
4158 SQMP
4159 blockdev-add
4160 ------------
4161
4162 Add a block device.
4163
4164 This command is still a work in progress.  It doesn't support all
4165 block drivers among other things.  Stay away from it unless you want
4166 to help with its development.
4167
4168 Arguments:
4169
4170 - "options": block driver options
4171
4172 Example (1):
4173
4174 -> { "execute": "blockdev-add",
4175     "arguments": { "options" : { "driver": "qcow2",
4176                                  "file": { "driver": "file",
4177                                            "filename": "test.qcow2" } } } }
4178 <- { "return": {} }
4179
4180 Example (2):
4181
4182 -> { "execute": "blockdev-add",
4183      "arguments": {
4184          "options": {
4185            "driver": "qcow2",
4186            "id": "my_disk",
4187            "discard": "unmap",
4188            "cache": {
4189                "direct": true,
4190                "writeback": true
4191            },
4192            "file": {
4193                "driver": "file",
4194                "filename": "/tmp/test.qcow2"
4195            },
4196            "backing": {
4197                "driver": "raw",
4198                "file": {
4199                    "driver": "file",
4200                    "filename": "/dev/fdset/4"
4201                }
4202            }
4203          }
4204        }
4205      }
4206
4207 <- { "return": {} }
4208
4209 EQMP
4210
4211     {
4212         .name       = "x-blockdev-del",
4213         .args_type  = "id:s?,node-name:s?",
4214         .mhandler.cmd_new = qmp_marshal_x_blockdev_del,
4215     },
4216
4217 SQMP
4218 x-blockdev-del
4219 ------------
4220 Since 2.5
4221
4222 Deletes a block device thas has been added using blockdev-add.
4223 The selected device can be either a block backend or a graph node.
4224
4225 In the former case the backend will be destroyed, along with its
4226 inserted medium if there's any. The command will fail if the backend
4227 or its medium are in use.
4228
4229 In the latter case the node will be destroyed. The command will fail
4230 if the node is attached to a block backend or is otherwise being
4231 used.
4232
4233 One of "id" or "node-name" must be specified, but not both.
4234
4235 This command is still a work in progress and is considered
4236 experimental. Stay away from it unless you want to help with its
4237 development.
4238
4239 Arguments:
4240
4241 - "id": Name of the block backend device to delete (json-string, optional)
4242 - "node-name": Name of the graph node to delete (json-string, optional)
4243
4244 Example:
4245
4246 -> { "execute": "blockdev-add",
4247      "arguments": {
4248          "options": {
4249              "driver": "qcow2",
4250              "id": "drive0",
4251              "file": {
4252                  "driver": "file",
4253                  "filename": "test.qcow2"
4254              }
4255          }
4256      }
4257    }
4258
4259 <- { "return": {} }
4260
4261 -> { "execute": "x-blockdev-del",
4262      "arguments": { "id": "drive0" }
4263    }
4264 <- { "return": {} }
4265
4266 EQMP
4267
4268     {
4269         .name       = "blockdev-open-tray",
4270         .args_type  = "device:s,force:b?",
4271         .mhandler.cmd_new = qmp_marshal_blockdev_open_tray,
4272     },
4273
4274 SQMP
4275 blockdev-open-tray
4276 ------------------
4277
4278 Opens a block device's tray. If there is a block driver state tree inserted as a
4279 medium, it will become inaccessible to the guest (but it will remain associated
4280 to the block device, so closing the tray will make it accessible again).
4281
4282 If the tray was already open before, this will be a no-op.
4283
4284 Once the tray opens, a DEVICE_TRAY_MOVED event is emitted. There are cases in
4285 which no such event will be generated, these include:
4286 - if the guest has locked the tray, @force is false and the guest does not
4287   respond to the eject request
4288 - if the BlockBackend denoted by @device does not have a guest device attached
4289   to it
4290 - if the guest device does not have an actual tray and is empty, for instance
4291   for floppy disk drives
4292
4293 Arguments:
4294
4295 - "device": block device name (json-string)
4296 - "force": if false (the default), an eject request will be sent to the guest if
4297            it has locked the tray (and the tray will not be opened immediately);
4298            if true, the tray will be opened regardless of whether it is locked
4299            (json-bool, optional)
4300
4301 Example:
4302
4303 -> { "execute": "blockdev-open-tray",
4304      "arguments": { "device": "ide1-cd0" } }
4305
4306 <- { "timestamp": { "seconds": 1418751016,
4307                     "microseconds": 716996 },
4308      "event": "DEVICE_TRAY_MOVED",
4309      "data": { "device": "ide1-cd0",
4310                "tray-open": true } }
4311
4312 <- { "return": {} }
4313
4314 EQMP
4315
4316     {
4317         .name       = "blockdev-close-tray",
4318         .args_type  = "device:s",
4319         .mhandler.cmd_new = qmp_marshal_blockdev_close_tray,
4320     },
4321
4322 SQMP
4323 blockdev-close-tray
4324 -------------------
4325
4326 Closes a block device's tray. If there is a block driver state tree associated
4327 with the block device (which is currently ejected), that tree will be loaded as
4328 the medium.
4329
4330 If the tray was already closed before, this will be a no-op.
4331
4332 Arguments:
4333
4334 - "device": block device name (json-string)
4335
4336 Example:
4337
4338 -> { "execute": "blockdev-close-tray",
4339      "arguments": { "device": "ide1-cd0" } }
4340
4341 <- { "timestamp": { "seconds": 1418751345,
4342                     "microseconds": 272147 },
4343      "event": "DEVICE_TRAY_MOVED",
4344      "data": { "device": "ide1-cd0",
4345                "tray-open": false } }
4346
4347 <- { "return": {} }
4348
4349 EQMP
4350
4351     {
4352         .name       = "x-blockdev-remove-medium",
4353         .args_type  = "device:s",
4354         .mhandler.cmd_new = qmp_marshal_x_blockdev_remove_medium,
4355     },
4356
4357 SQMP
4358 x-blockdev-remove-medium
4359 ------------------------
4360
4361 Removes a medium (a block driver state tree) from a block device. That block
4362 device's tray must currently be open (unless there is no attached guest device).
4363
4364 If the tray is open and there is no medium inserted, this will be a no-op.
4365
4366 This command is still a work in progress and is considered experimental.
4367 Stay away from it unless you want to help with its development.
4368
4369 Arguments:
4370
4371 - "device": block device name (json-string)
4372
4373 Example:
4374
4375 -> { "execute": "x-blockdev-remove-medium",
4376      "arguments": { "device": "ide1-cd0" } }
4377
4378 <- { "error": { "class": "GenericError",
4379                 "desc": "Tray of device 'ide1-cd0' is not open" } }
4380
4381 -> { "execute": "blockdev-open-tray",
4382      "arguments": { "device": "ide1-cd0" } }
4383
4384 <- { "timestamp": { "seconds": 1418751627,
4385                     "microseconds": 549958 },
4386      "event": "DEVICE_TRAY_MOVED",
4387      "data": { "device": "ide1-cd0",
4388                "tray-open": true } }
4389
4390 <- { "return": {} }
4391
4392 -> { "execute": "x-blockdev-remove-medium",
4393      "arguments": { "device": "ide1-cd0" } }
4394
4395 <- { "return": {} }
4396
4397 EQMP
4398
4399     {
4400         .name       = "x-blockdev-insert-medium",
4401         .args_type  = "device:s,node-name:s",
4402         .mhandler.cmd_new = qmp_marshal_x_blockdev_insert_medium,
4403     },
4404
4405 SQMP
4406 x-blockdev-insert-medium
4407 ------------------------
4408
4409 Inserts a medium (a block driver state tree) into a block device. That block
4410 device's tray must currently be open (unless there is no attached guest device)
4411 and there must be no medium inserted already.
4412
4413 This command is still a work in progress and is considered experimental.
4414 Stay away from it unless you want to help with its development.
4415
4416 Arguments:
4417
4418 - "device": block device name (json-string)
4419 - "node-name": root node of the BDS tree to insert into the block device
4420
4421 Example:
4422
4423 -> { "execute": "blockdev-add",
4424      "arguments": { "options": { "node-name": "node0",
4425                                  "driver": "raw",
4426                                  "file": { "driver": "file",
4427                                            "filename": "fedora.iso" } } } }
4428
4429 <- { "return": {} }
4430
4431 -> { "execute": "x-blockdev-insert-medium",
4432      "arguments": { "device": "ide1-cd0",
4433                     "node-name": "node0" } }
4434
4435 <- { "return": {} }
4436
4437 EQMP
4438
4439     {
4440         .name       = "x-blockdev-change",
4441         .args_type  = "parent:B,child:B?,node:B?",
4442         .mhandler.cmd_new = qmp_marshal_x_blockdev_change,
4443     },
4444
4445 SQMP
4446 x-blockdev-change
4447 -----------------
4448
4449 Dynamically reconfigure the block driver state graph. It can be used
4450 to add, remove, insert or replace a graph node. Currently only the
4451 Quorum driver implements this feature to add or remove its child. This
4452 is useful to fix a broken quorum child.
4453
4454 If @node is specified, it will be inserted under @parent. @child
4455 may not be specified in this case. If both @parent and @child are
4456 specified but @node is not, @child will be detached from @parent.
4457
4458 Arguments:
4459 - "parent": the id or name of the parent node (json-string)
4460 - "child": the name of a child under the given parent node (json-string, optional)
4461 - "node": the name of the node that will be added (json-string, optional)
4462
4463 Note: this command is experimental, and not a stable API. It doesn't
4464 support all kinds of operations, all kinds of children, nor all block
4465 drivers.
4466
4467 Warning: The data in a new quorum child MUST be consistent with that of
4468 the rest of the array.
4469
4470 Example:
4471
4472 Add a new node to a quorum
4473 -> { "execute": "blockdev-add",
4474      "arguments": { "options": { "driver": "raw",
4475                                  "node-name": "new_node",
4476                                  "file": { "driver": "file",
4477                                            "filename": "test.raw" } } } }
4478 <- { "return": {} }
4479 -> { "execute": "x-blockdev-change",
4480      "arguments": { "parent": "disk1",
4481                     "node": "new_node" } }
4482 <- { "return": {} }
4483
4484 Delete a quorum's node
4485 -> { "execute": "x-blockdev-change",
4486      "arguments": { "parent": "disk1",
4487                     "child": "children.1" } }
4488 <- { "return": {} }
4489
4490 EQMP
4491
4492     {
4493         .name       = "query-named-block-nodes",
4494         .args_type  = "",
4495         .mhandler.cmd_new = qmp_marshal_query_named_block_nodes,
4496     },
4497
4498 SQMP
4499 @query-named-block-nodes
4500 ------------------------
4501
4502 Return a list of BlockDeviceInfo for all the named block driver nodes
4503
4504 Example:
4505
4506 -> { "execute": "query-named-block-nodes" }
4507 <- { "return": [ { "ro":false,
4508                    "drv":"qcow2",
4509                    "encrypted":false,
4510                    "file":"disks/test.qcow2",
4511                    "node-name": "my-node",
4512                    "backing_file_depth":1,
4513                    "bps":1000000,
4514                    "bps_rd":0,
4515                    "bps_wr":0,
4516                    "iops":1000000,
4517                    "iops_rd":0,
4518                    "iops_wr":0,
4519                    "bps_max": 8000000,
4520                    "bps_rd_max": 0,
4521                    "bps_wr_max": 0,
4522                    "iops_max": 0,
4523                    "iops_rd_max": 0,
4524                    "iops_wr_max": 0,
4525                    "iops_size": 0,
4526                    "write_threshold": 0,
4527                    "image":{
4528                       "filename":"disks/test.qcow2",
4529                       "format":"qcow2",
4530                       "virtual-size":2048000,
4531                       "backing_file":"base.qcow2",
4532                       "full-backing-filename":"disks/base.qcow2",
4533                       "backing-filename-format":"qcow2",
4534                       "snapshots":[
4535                          {
4536                             "id": "1",
4537                             "name": "snapshot1",
4538                             "vm-state-size": 0,
4539                             "date-sec": 10000200,
4540                             "date-nsec": 12,
4541                             "vm-clock-sec": 206,
4542                             "vm-clock-nsec": 30
4543                          }
4544                       ],
4545                       "backing-image":{
4546                           "filename":"disks/base.qcow2",
4547                           "format":"qcow2",
4548                           "virtual-size":2048000
4549                       }
4550                    } } ] }
4551
4552 EQMP
4553
4554     {
4555         .name       = "blockdev-change-medium",
4556         .args_type  = "device:B,filename:F,format:s?,read-only-mode:s?",
4557         .mhandler.cmd_new = qmp_marshal_blockdev_change_medium,
4558     },
4559
4560 SQMP
4561 blockdev-change-medium
4562 ----------------------
4563
4564 Changes the medium inserted into a block device by ejecting the current medium
4565 and loading a new image file which is inserted as the new medium.
4566
4567 Arguments:
4568
4569 - "device": device name (json-string)
4570 - "filename": filename of the new image (json-string)
4571 - "format": format of the new image (json-string, optional)
4572 - "read-only-mode": new read-only mode (json-string, optional)
4573           - Possible values: "retain" (default), "read-only", "read-write"
4574
4575 Examples:
4576
4577 1. Change a removable medium
4578
4579 -> { "execute": "blockdev-change-medium",
4580              "arguments": { "device": "ide1-cd0",
4581                             "filename": "/srv/images/Fedora-12-x86_64-DVD.iso",
4582                             "format": "raw" } }
4583 <- { "return": {} }
4584
4585 2. Load a read-only medium into a writable drive
4586
4587 -> { "execute": "blockdev-change-medium",
4588              "arguments": { "device": "isa-fd0",
4589                             "filename": "/srv/images/ro.img",
4590                             "format": "raw",
4591                             "read-only-mode": "retain" } }
4592
4593 <- { "error":
4594      { "class": "GenericError",
4595        "desc": "Could not open '/srv/images/ro.img': Permission denied" } }
4596
4597 -> { "execute": "blockdev-change-medium",
4598              "arguments": { "device": "isa-fd0",
4599                             "filename": "/srv/images/ro.img",
4600                             "format": "raw",
4601                             "read-only-mode": "read-only" } }
4602
4603 <- { "return": {} }
4604
4605 EQMP
4606
4607     {
4608         .name       = "query-memdev",
4609         .args_type  = "",
4610         .mhandler.cmd_new = qmp_marshal_query_memdev,
4611     },
4612
4613 SQMP
4614 query-memdev
4615 ------------
4616
4617 Show memory devices information.
4618
4619
4620 Example (1):
4621
4622 -> { "execute": "query-memdev" }
4623 <- { "return": [
4624        {
4625          "size": 536870912,
4626          "merge": false,
4627          "dump": true,
4628          "prealloc": false,
4629          "host-nodes": [0, 1],
4630          "policy": "bind"
4631        },
4632        {
4633          "size": 536870912,
4634          "merge": false,
4635          "dump": true,
4636          "prealloc": true,
4637          "host-nodes": [2, 3],
4638          "policy": "preferred"
4639        }
4640      ]
4641    }
4642
4643 EQMP
4644
4645     {
4646         .name       = "query-memory-devices",
4647         .args_type  = "",
4648         .mhandler.cmd_new = qmp_marshal_query_memory_devices,
4649     },
4650
4651 SQMP
4652 @query-memory-devices
4653 --------------------
4654
4655 Return a list of memory devices.
4656
4657 Example:
4658 -> { "execute": "query-memory-devices" }
4659 <- { "return": [ { "data":
4660                       { "addr": 5368709120,
4661                         "hotpluggable": true,
4662                         "hotplugged": true,
4663                         "id": "d1",
4664                         "memdev": "/objects/memX",
4665                         "node": 0,
4666                         "size": 1073741824,
4667                         "slot": 0},
4668                    "type": "dimm"
4669                  } ] }
4670 EQMP
4671
4672     {
4673         .name       = "query-acpi-ospm-status",
4674         .args_type  = "",
4675         .mhandler.cmd_new = qmp_marshal_query_acpi_ospm_status,
4676     },
4677
4678 SQMP
4679 @query-acpi-ospm-status
4680 --------------------
4681
4682 Return list of ACPIOSTInfo for devices that support status reporting
4683 via ACPI _OST method.
4684
4685 Example:
4686 -> { "execute": "query-acpi-ospm-status" }
4687 <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0},
4688                  { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0},
4689                  { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0},
4690                  { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0}
4691    ]}
4692 EQMP
4693
4694 #if defined TARGET_I386
4695     {
4696         .name       = "rtc-reset-reinjection",
4697         .args_type  = "",
4698         .mhandler.cmd_new = qmp_marshal_rtc_reset_reinjection,
4699     },
4700 #endif
4701
4702 SQMP
4703 rtc-reset-reinjection
4704 ---------------------
4705
4706 Reset the RTC interrupt reinjection backlog.
4707
4708 Arguments: None.
4709
4710 Example:
4711
4712 -> { "execute": "rtc-reset-reinjection" }
4713 <- { "return": {} }
4714 EQMP
4715
4716     {
4717         .name       = "trace-event-get-state",
4718         .args_type  = "name:s,vcpu:i?",
4719         .mhandler.cmd_new = qmp_marshal_trace_event_get_state,
4720     },
4721
4722 SQMP
4723 trace-event-get-state
4724 ---------------------
4725
4726 Query the state of events.
4727
4728 Arguments:
4729
4730 - "name": Event name pattern (json-string).
4731 - "vcpu": The vCPU to query, any vCPU by default (json-int, optional).
4732
4733 An event is returned if:
4734 - its name matches the "name" pattern, and
4735 - if "vcpu" is given, the event has the "vcpu" property.
4736
4737 Therefore, if "vcpu" is given, the operation will only match per-vCPU events,
4738 returning their state on the specified vCPU. Special case: if "name" is an exact
4739 match, "vcpu" is given and the event does not have the "vcpu" property, an error
4740 is returned.
4741
4742 Example:
4743
4744 -> { "execute": "trace-event-get-state", "arguments": { "name": "qemu_memalign" } }
4745 <- { "return": [ { "name": "qemu_memalign", "state": "disabled" } ] }
4746 EQMP
4747
4748     {
4749         .name       = "trace-event-set-state",
4750         .args_type  = "name:s,enable:b,ignore-unavailable:b?,vcpu:i?",
4751         .mhandler.cmd_new = qmp_marshal_trace_event_set_state,
4752     },
4753
4754 SQMP
4755 trace-event-set-state
4756 ---------------------
4757
4758 Set the state of events.
4759
4760 Arguments:
4761
4762 - "name": Event name pattern (json-string).
4763 - "enable": Whether to enable or disable the event (json-bool).
4764 - "ignore-unavailable": Whether to ignore errors for events that cannot be
4765   changed (json-bool, optional).
4766 - "vcpu": The vCPU to act upon, all vCPUs by default (json-int, optional).
4767
4768 An event's state is modified if:
4769 - its name matches the "name" pattern, and
4770 - if "vcpu" is given, the event has the "vcpu" property.
4771
4772 Therefore, if "vcpu" is given, the operation will only match per-vCPU events,
4773 setting their state on the specified vCPU. Special case: if "name" is an exact
4774 match, "vcpu" is given and the event does not have the "vcpu" property, an error
4775 is returned.
4776
4777 Example:
4778
4779 -> { "execute": "trace-event-set-state", "arguments": { "name": "qemu_memalign", "enable": "true" } }
4780 <- { "return": {} }
4781 EQMP
4782
4783     {
4784         .name       = "input-send-event",
4785         .args_type  = "console:i?,events:q",
4786         .mhandler.cmd_new = qmp_marshal_input_send_event,
4787     },
4788
4789 SQMP
4790 @input-send-event
4791 -----------------
4792
4793 Send input event to guest.
4794
4795 Arguments:
4796
4797 - "device": display device (json-string, optional)
4798 - "head": display head (json-int, optional)
4799 - "events": list of input events
4800
4801 The consoles are visible in the qom tree, under
4802 /backend/console[$index]. They have a device link and head property, so
4803 it is possible to map which console belongs to which device and display.
4804
4805 Note: this command is experimental, and not a stable API.
4806
4807 Example (1):
4808
4809 Press left mouse button.
4810
4811 -> { "execute": "input-send-event",
4812     "arguments": { "device": "video0",
4813                    "events": [ { "type": "btn",
4814                    "data" : { "down": true, "button": "left" } } ] } }
4815 <- { "return": {} }
4816
4817 -> { "execute": "input-send-event",
4818     "arguments": { "device": "video0",
4819                    "events": [ { "type": "btn",
4820                    "data" : { "down": false, "button": "left" } } ] } }
4821 <- { "return": {} }
4822
4823 Example (2):
4824
4825 Press ctrl-alt-del.
4826
4827 -> { "execute": "input-send-event",
4828      "arguments": { "events": [
4829         { "type": "key", "data" : { "down": true,
4830           "key": {"type": "qcode", "data": "ctrl" } } },
4831         { "type": "key", "data" : { "down": true,
4832           "key": {"type": "qcode", "data": "alt" } } },
4833         { "type": "key", "data" : { "down": true,
4834           "key": {"type": "qcode", "data": "delete" } } } ] } }
4835 <- { "return": {} }
4836
4837 Example (3):
4838
4839 Move mouse pointer to absolute coordinates (20000, 400).
4840
4841 -> { "execute": "input-send-event" ,
4842   "arguments": { "events": [
4843                { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
4844                { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
4845 <- { "return": {} }
4846
4847 EQMP
4848
4849     {
4850         .name       = "block-set-write-threshold",
4851         .args_type  = "node-name:s,write-threshold:l",
4852         .mhandler.cmd_new = qmp_marshal_block_set_write_threshold,
4853     },
4854
4855 SQMP
4856 block-set-write-threshold
4857 ------------
4858
4859 Change the write threshold for a block drive. The threshold is an offset,
4860 thus must be non-negative. Default is no write threshold.
4861 Setting the threshold to zero disables it.
4862
4863 Arguments:
4864
4865 - "node-name": the node name in the block driver state graph (json-string)
4866 - "write-threshold": the write threshold in bytes (json-int)
4867
4868 Example:
4869
4870 -> { "execute": "block-set-write-threshold",
4871   "arguments": { "node-name": "mydev",
4872                  "write-threshold": 17179869184 } }
4873 <- { "return": {} }
4874
4875 EQMP
4876
4877     {
4878         .name       = "query-rocker",
4879         .args_type  = "name:s",
4880         .mhandler.cmd_new = qmp_marshal_query_rocker,
4881     },
4882
4883 SQMP
4884 Show rocker switch
4885 ------------------
4886
4887 Arguments:
4888
4889 - "name": switch name
4890
4891 Example:
4892
4893 -> { "execute": "query-rocker", "arguments": { "name": "sw1" } }
4894 <- { "return": {"name": "sw1", "ports": 2, "id": 1327446905938}}
4895
4896 EQMP
4897
4898     {
4899         .name       = "query-rocker-ports",
4900         .args_type  = "name:s",
4901         .mhandler.cmd_new = qmp_marshal_query_rocker_ports,
4902     },
4903
4904 SQMP
4905 Show rocker switch ports
4906 ------------------------
4907
4908 Arguments:
4909
4910 - "name": switch name
4911
4912 Example:
4913
4914 -> { "execute": "query-rocker-ports", "arguments": { "name": "sw1" } }
4915 <- { "return": [ {"duplex": "full", "enabled": true, "name": "sw1.1",
4916                   "autoneg": "off", "link-up": true, "speed": 10000},
4917                  {"duplex": "full", "enabled": true, "name": "sw1.2",
4918                   "autoneg": "off", "link-up": true, "speed": 10000}
4919    ]}
4920
4921 EQMP
4922
4923     {
4924         .name       = "query-rocker-of-dpa-flows",
4925         .args_type  = "name:s,tbl-id:i?",
4926         .mhandler.cmd_new = qmp_marshal_query_rocker_of_dpa_flows,
4927     },
4928
4929 SQMP
4930 Show rocker switch OF-DPA flow tables
4931 -------------------------------------
4932
4933 Arguments:
4934
4935 - "name": switch name
4936 - "tbl-id": (optional) flow table ID
4937
4938 Example:
4939
4940 -> { "execute": "query-rocker-of-dpa-flows", "arguments": { "name": "sw1" } }
4941 <- { "return": [ {"key": {"in-pport": 0, "priority": 1, "tbl-id": 0},
4942                   "hits": 138,
4943                   "cookie": 0,
4944                   "action": {"goto-tbl": 10},
4945                   "mask": {"in-pport": 4294901760}
4946                  },
4947                  {...more...},
4948    ]}
4949
4950 EQMP
4951
4952     {
4953         .name       = "query-rocker-of-dpa-groups",
4954         .args_type  = "name:s,type:i?",
4955         .mhandler.cmd_new = qmp_marshal_query_rocker_of_dpa_groups,
4956     },
4957
4958 SQMP
4959 Show rocker OF-DPA group tables
4960 -------------------------------
4961
4962 Arguments:
4963
4964 - "name": switch name
4965 - "type": (optional) group type
4966
4967 Example:
4968
4969 -> { "execute": "query-rocker-of-dpa-groups", "arguments": { "name": "sw1" } }
4970 <- { "return": [ {"type": 0, "out-pport": 2, "pport": 2, "vlan-id": 3841,
4971                   "pop-vlan": 1, "id": 251723778},
4972                  {"type": 0, "out-pport": 0, "pport": 0, "vlan-id": 3841,
4973                   "pop-vlan": 1, "id": 251723776},
4974                  {"type": 0, "out-pport": 1, "pport": 1, "vlan-id": 3840,
4975                   "pop-vlan": 1, "id": 251658241},
4976                  {"type": 0, "out-pport": 0, "pport": 0, "vlan-id": 3840,
4977                   "pop-vlan": 1, "id": 251658240}
4978    ]}
4979
4980 EQMP
4981
4982 #if defined TARGET_ARM
4983     {
4984         .name       = "query-gic-capabilities",
4985         .args_type  = "",
4986         .mhandler.cmd_new = qmp_marshal_query_gic_capabilities,
4987     },
4988 #endif
4989
4990 SQMP
4991 query-gic-capabilities
4992 ---------------
4993
4994 Return a list of GICCapability objects, describing supported GIC
4995 (Generic Interrupt Controller) versions.
4996
4997 Arguments: None
4998
4999 Example:
5000
5001 -> { "execute": "query-gic-capabilities" }
5002 <- { "return": [{ "version": 2, "emulated": true, "kernel": false },
5003                 { "version": 3, "emulated": false, "kernel": true } ] }
5004
5005 EQMP
5006
5007     {
5008         .name       = "query-hotpluggable-cpus",
5009         .args_type  = "",
5010         .mhandler.cmd_new = qmp_marshal_query_hotpluggable_cpus,
5011     },
5012
5013 SQMP
5014 Show existing/possible CPUs
5015 ---------------------------
5016
5017 Arguments: None.
5018
5019 Example for pseries machine type started with
5020 -smp 2,cores=2,maxcpus=4 -cpu POWER8:
5021
5022 -> { "execute": "query-hotpluggable-cpus" }
5023 <- {"return": [
5024      { "props": { "core-id": 8 }, "type": "POWER8-spapr-cpu-core",
5025        "vcpus-count": 1 },
5026      { "props": { "core-id": 0 }, "type": "POWER8-spapr-cpu-core",
5027        "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"}
5028    ]}'