xhci: remove unimplemented printfs
[qemu/ar7.git] / hw / ide / pci.c
blob59fd53992a3d2f830be1b67118b3e71ace6bccff
1 /*
2 * QEMU IDE Emulation: PCI Bus support.
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23 * THE SOFTWARE.
25 #include <hw/hw.h>
26 #include <hw/pc.h>
27 #include <hw/pci/pci.h>
28 #include <hw/isa.h>
29 #include "block/block.h"
30 #include "sysemu/dma.h"
32 #include <hw/ide/pci.h>
34 #define BMDMA_PAGE_SIZE 4096
36 static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
37 BlockDriverCompletionFunc *dma_cb)
39 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
41 bm->unit = s->unit;
42 bm->dma_cb = dma_cb;
43 bm->cur_prd_last = 0;
44 bm->cur_prd_addr = 0;
45 bm->cur_prd_len = 0;
46 bm->sector_num = ide_get_sector(s);
47 bm->nsector = s->nsector;
49 if (bm->status & BM_STATUS_DMAING) {
50 bm->dma_cb(bmdma_active_if(bm), 0);
54 /* return 0 if buffer completed */
55 static int bmdma_prepare_buf(IDEDMA *dma, int is_write)
57 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
58 IDEState *s = bmdma_active_if(bm);
59 struct {
60 uint32_t addr;
61 uint32_t size;
62 } prd;
63 int l, len;
65 pci_dma_sglist_init(&s->sg, &bm->pci_dev->dev,
66 s->nsector / (BMDMA_PAGE_SIZE / 512) + 1);
67 s->io_buffer_size = 0;
68 for(;;) {
69 if (bm->cur_prd_len == 0) {
70 /* end of table (with a fail safe of one page) */
71 if (bm->cur_prd_last ||
72 (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE)
73 return s->io_buffer_size != 0;
74 pci_dma_read(&bm->pci_dev->dev, bm->cur_addr, &prd, 8);
75 bm->cur_addr += 8;
76 prd.addr = le32_to_cpu(prd.addr);
77 prd.size = le32_to_cpu(prd.size);
78 len = prd.size & 0xfffe;
79 if (len == 0)
80 len = 0x10000;
81 bm->cur_prd_len = len;
82 bm->cur_prd_addr = prd.addr;
83 bm->cur_prd_last = (prd.size & 0x80000000);
85 l = bm->cur_prd_len;
86 if (l > 0) {
87 qemu_sglist_add(&s->sg, bm->cur_prd_addr, l);
88 bm->cur_prd_addr += l;
89 bm->cur_prd_len -= l;
90 s->io_buffer_size += l;
93 return 1;
96 /* return 0 if buffer completed */
97 static int bmdma_rw_buf(IDEDMA *dma, int is_write)
99 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
100 IDEState *s = bmdma_active_if(bm);
101 struct {
102 uint32_t addr;
103 uint32_t size;
104 } prd;
105 int l, len;
107 for(;;) {
108 l = s->io_buffer_size - s->io_buffer_index;
109 if (l <= 0)
110 break;
111 if (bm->cur_prd_len == 0) {
112 /* end of table (with a fail safe of one page) */
113 if (bm->cur_prd_last ||
114 (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE)
115 return 0;
116 pci_dma_read(&bm->pci_dev->dev, bm->cur_addr, &prd, 8);
117 bm->cur_addr += 8;
118 prd.addr = le32_to_cpu(prd.addr);
119 prd.size = le32_to_cpu(prd.size);
120 len = prd.size & 0xfffe;
121 if (len == 0)
122 len = 0x10000;
123 bm->cur_prd_len = len;
124 bm->cur_prd_addr = prd.addr;
125 bm->cur_prd_last = (prd.size & 0x80000000);
127 if (l > bm->cur_prd_len)
128 l = bm->cur_prd_len;
129 if (l > 0) {
130 if (is_write) {
131 pci_dma_write(&bm->pci_dev->dev, bm->cur_prd_addr,
132 s->io_buffer + s->io_buffer_index, l);
133 } else {
134 pci_dma_read(&bm->pci_dev->dev, bm->cur_prd_addr,
135 s->io_buffer + s->io_buffer_index, l);
137 bm->cur_prd_addr += l;
138 bm->cur_prd_len -= l;
139 s->io_buffer_index += l;
142 return 1;
145 static int bmdma_set_unit(IDEDMA *dma, int unit)
147 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
148 bm->unit = unit;
150 return 0;
153 static int bmdma_add_status(IDEDMA *dma, int status)
155 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
156 bm->status |= status;
158 return 0;
161 static int bmdma_set_inactive(IDEDMA *dma)
163 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
165 bm->status &= ~BM_STATUS_DMAING;
166 bm->dma_cb = NULL;
167 bm->unit = -1;
169 return 0;
172 static void bmdma_restart_dma(BMDMAState *bm, enum ide_dma_cmd dma_cmd)
174 IDEState *s = bmdma_active_if(bm);
176 ide_set_sector(s, bm->sector_num);
177 s->io_buffer_index = 0;
178 s->io_buffer_size = 0;
179 s->nsector = bm->nsector;
180 s->dma_cmd = dma_cmd;
181 bm->cur_addr = bm->addr;
182 bm->dma_cb = ide_dma_cb;
183 bmdma_start_dma(&bm->dma, s, bm->dma_cb);
186 /* TODO This should be common IDE code */
187 static void bmdma_restart_bh(void *opaque)
189 BMDMAState *bm = opaque;
190 IDEBus *bus = bm->bus;
191 bool is_read;
192 int error_status;
194 qemu_bh_delete(bm->bh);
195 bm->bh = NULL;
197 if (bm->unit == (uint8_t) -1) {
198 return;
201 is_read = (bus->error_status & BM_STATUS_RETRY_READ) != 0;
203 /* The error status must be cleared before resubmitting the request: The
204 * request may fail again, and this case can only be distinguished if the
205 * called function can set a new error status. */
206 error_status = bus->error_status;
207 bus->error_status = 0;
209 if (error_status & BM_STATUS_DMA_RETRY) {
210 if (error_status & BM_STATUS_RETRY_TRIM) {
211 bmdma_restart_dma(bm, IDE_DMA_TRIM);
212 } else {
213 bmdma_restart_dma(bm, is_read ? IDE_DMA_READ : IDE_DMA_WRITE);
215 } else if (error_status & BM_STATUS_PIO_RETRY) {
216 if (is_read) {
217 ide_sector_read(bmdma_active_if(bm));
218 } else {
219 ide_sector_write(bmdma_active_if(bm));
221 } else if (error_status & BM_STATUS_RETRY_FLUSH) {
222 ide_flush_cache(bmdma_active_if(bm));
226 static void bmdma_restart_cb(void *opaque, int running, RunState state)
228 IDEDMA *dma = opaque;
229 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
231 if (!running)
232 return;
234 if (!bm->bh) {
235 bm->bh = qemu_bh_new(bmdma_restart_bh, &bm->dma);
236 qemu_bh_schedule(bm->bh);
240 static void bmdma_cancel(BMDMAState *bm)
242 if (bm->status & BM_STATUS_DMAING) {
243 /* cancel DMA request */
244 bmdma_set_inactive(&bm->dma);
248 static int bmdma_reset(IDEDMA *dma)
250 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
252 #ifdef DEBUG_IDE
253 printf("ide: dma_reset\n");
254 #endif
255 bmdma_cancel(bm);
256 bm->cmd = 0;
257 bm->status = 0;
258 bm->addr = 0;
259 bm->cur_addr = 0;
260 bm->cur_prd_last = 0;
261 bm->cur_prd_addr = 0;
262 bm->cur_prd_len = 0;
263 bm->sector_num = 0;
264 bm->nsector = 0;
266 return 0;
269 static int bmdma_start_transfer(IDEDMA *dma)
271 return 0;
274 static void bmdma_irq(void *opaque, int n, int level)
276 BMDMAState *bm = opaque;
278 if (!level) {
279 /* pass through lower */
280 qemu_set_irq(bm->irq, level);
281 return;
284 bm->status |= BM_STATUS_INT;
286 /* trigger the real irq */
287 qemu_set_irq(bm->irq, level);
290 void bmdma_cmd_writeb(BMDMAState *bm, uint32_t val)
292 #ifdef DEBUG_IDE
293 printf("%s: 0x%08x\n", __func__, val);
294 #endif
296 /* Ignore writes to SSBM if it keeps the old value */
297 if ((val & BM_CMD_START) != (bm->cmd & BM_CMD_START)) {
298 if (!(val & BM_CMD_START)) {
300 * We can't cancel Scatter Gather DMA in the middle of the
301 * operation or a partial (not full) DMA transfer would reach
302 * the storage so we wait for completion instead (we beahve
303 * like if the DMA was completed by the time the guest trying
304 * to cancel dma with bmdma_cmd_writeb with BM_CMD_START not
305 * set).
307 * In the future we'll be able to safely cancel the I/O if the
308 * whole DMA operation will be submitted to disk with a single
309 * aio operation with preadv/pwritev.
311 if (bm->bus->dma->aiocb) {
312 bdrv_drain_all();
313 assert(bm->bus->dma->aiocb == NULL);
315 } else {
316 bm->cur_addr = bm->addr;
317 if (!(bm->status & BM_STATUS_DMAING)) {
318 bm->status |= BM_STATUS_DMAING;
319 /* start dma transfer if possible */
320 if (bm->dma_cb)
321 bm->dma_cb(bmdma_active_if(bm), 0);
326 bm->cmd = val & 0x09;
329 static uint64_t bmdma_addr_read(void *opaque, hwaddr addr,
330 unsigned width)
332 BMDMAState *bm = opaque;
333 uint32_t mask = (1ULL << (width * 8)) - 1;
334 uint64_t data;
336 data = (bm->addr >> (addr * 8)) & mask;
337 #ifdef DEBUG_IDE
338 printf("%s: 0x%08x\n", __func__, (unsigned)data);
339 #endif
340 return data;
343 static void bmdma_addr_write(void *opaque, hwaddr addr,
344 uint64_t data, unsigned width)
346 BMDMAState *bm = opaque;
347 int shift = addr * 8;
348 uint32_t mask = (1ULL << (width * 8)) - 1;
350 #ifdef DEBUG_IDE
351 printf("%s: 0x%08x\n", __func__, (unsigned)data);
352 #endif
353 bm->addr &= ~(mask << shift);
354 bm->addr |= ((data & mask) << shift) & ~3;
357 MemoryRegionOps bmdma_addr_ioport_ops = {
358 .read = bmdma_addr_read,
359 .write = bmdma_addr_write,
360 .endianness = DEVICE_LITTLE_ENDIAN,
363 static bool ide_bmdma_current_needed(void *opaque)
365 BMDMAState *bm = opaque;
367 return (bm->cur_prd_len != 0);
370 static bool ide_bmdma_status_needed(void *opaque)
372 BMDMAState *bm = opaque;
374 /* Older versions abused some bits in the status register for internal
375 * error state. If any of these bits are set, we must add a subsection to
376 * transfer the real status register */
377 uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS;
379 return ((bm->status & abused_bits) != 0);
382 static void ide_bmdma_pre_save(void *opaque)
384 BMDMAState *bm = opaque;
385 uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS;
387 bm->migration_compat_status =
388 (bm->status & ~abused_bits) | (bm->bus->error_status & abused_bits);
391 /* This function accesses bm->bus->error_status which is loaded only after
392 * BMDMA itself. This is why the function is called from ide_pci_post_load
393 * instead of being registered with VMState where it would run too early. */
394 static int ide_bmdma_post_load(void *opaque, int version_id)
396 BMDMAState *bm = opaque;
397 uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS;
399 if (bm->status == 0) {
400 bm->status = bm->migration_compat_status & ~abused_bits;
401 bm->bus->error_status |= bm->migration_compat_status & abused_bits;
404 return 0;
407 static const VMStateDescription vmstate_bmdma_current = {
408 .name = "ide bmdma_current",
409 .version_id = 1,
410 .minimum_version_id = 1,
411 .minimum_version_id_old = 1,
412 .fields = (VMStateField []) {
413 VMSTATE_UINT32(cur_addr, BMDMAState),
414 VMSTATE_UINT32(cur_prd_last, BMDMAState),
415 VMSTATE_UINT32(cur_prd_addr, BMDMAState),
416 VMSTATE_UINT32(cur_prd_len, BMDMAState),
417 VMSTATE_END_OF_LIST()
421 const VMStateDescription vmstate_bmdma_status = {
422 .name ="ide bmdma/status",
423 .version_id = 1,
424 .minimum_version_id = 1,
425 .minimum_version_id_old = 1,
426 .fields = (VMStateField []) {
427 VMSTATE_UINT8(status, BMDMAState),
428 VMSTATE_END_OF_LIST()
432 static const VMStateDescription vmstate_bmdma = {
433 .name = "ide bmdma",
434 .version_id = 3,
435 .minimum_version_id = 0,
436 .minimum_version_id_old = 0,
437 .pre_save = ide_bmdma_pre_save,
438 .fields = (VMStateField []) {
439 VMSTATE_UINT8(cmd, BMDMAState),
440 VMSTATE_UINT8(migration_compat_status, BMDMAState),
441 VMSTATE_UINT32(addr, BMDMAState),
442 VMSTATE_INT64(sector_num, BMDMAState),
443 VMSTATE_UINT32(nsector, BMDMAState),
444 VMSTATE_UINT8(unit, BMDMAState),
445 VMSTATE_END_OF_LIST()
447 .subsections = (VMStateSubsection []) {
449 .vmsd = &vmstate_bmdma_current,
450 .needed = ide_bmdma_current_needed,
451 }, {
452 .vmsd = &vmstate_bmdma_status,
453 .needed = ide_bmdma_status_needed,
454 }, {
455 /* empty */
460 static int ide_pci_post_load(void *opaque, int version_id)
462 PCIIDEState *d = opaque;
463 int i;
465 for(i = 0; i < 2; i++) {
466 /* current versions always store 0/1, but older version
467 stored bigger values. We only need last bit */
468 d->bmdma[i].unit &= 1;
469 ide_bmdma_post_load(&d->bmdma[i], -1);
472 return 0;
475 const VMStateDescription vmstate_ide_pci = {
476 .name = "ide",
477 .version_id = 3,
478 .minimum_version_id = 0,
479 .minimum_version_id_old = 0,
480 .post_load = ide_pci_post_load,
481 .fields = (VMStateField []) {
482 VMSTATE_PCI_DEVICE(dev, PCIIDEState),
483 VMSTATE_STRUCT_ARRAY(bmdma, PCIIDEState, 2, 0,
484 vmstate_bmdma, BMDMAState),
485 VMSTATE_IDE_BUS_ARRAY(bus, PCIIDEState, 2),
486 VMSTATE_IDE_DRIVES(bus[0].ifs, PCIIDEState),
487 VMSTATE_IDE_DRIVES(bus[1].ifs, PCIIDEState),
488 VMSTATE_END_OF_LIST()
492 void pci_ide_create_devs(PCIDevice *dev, DriveInfo **hd_table)
494 PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
495 static const int bus[4] = { 0, 0, 1, 1 };
496 static const int unit[4] = { 0, 1, 0, 1 };
497 int i;
499 for (i = 0; i < 4; i++) {
500 if (hd_table[i] == NULL)
501 continue;
502 ide_create_drive(d->bus+bus[i], unit[i], hd_table[i]);
506 static const struct IDEDMAOps bmdma_ops = {
507 .start_dma = bmdma_start_dma,
508 .start_transfer = bmdma_start_transfer,
509 .prepare_buf = bmdma_prepare_buf,
510 .rw_buf = bmdma_rw_buf,
511 .set_unit = bmdma_set_unit,
512 .add_status = bmdma_add_status,
513 .set_inactive = bmdma_set_inactive,
514 .restart_cb = bmdma_restart_cb,
515 .reset = bmdma_reset,
518 void bmdma_init(IDEBus *bus, BMDMAState *bm, PCIIDEState *d)
520 qemu_irq *irq;
522 if (bus->dma == &bm->dma) {
523 return;
526 bm->dma.ops = &bmdma_ops;
527 bus->dma = &bm->dma;
528 bm->irq = bus->irq;
529 irq = qemu_allocate_irqs(bmdma_irq, bm, 1);
530 bus->irq = *irq;
531 bm->pci_dev = d;