2 * QEMU PowerPC PowerNV LPC controller
4 * Copyright (c) 2016, IBM Corporation.
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License as published by the Free Software Foundation; either
9 * version 2 of the License, or (at your option) any later version.
11 * This library is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
14 * Lesser General Public License for more details.
16 * You should have received a copy of the GNU Lesser General Public
17 * License along with this library; if not, see <http://www.gnu.org/licenses/>.
20 #include "qemu/osdep.h"
21 #include "sysemu/sysemu.h"
22 #include "target/ppc/cpu.h"
23 #include "qapi/error.h"
26 #include "hw/ppc/pnv.h"
27 #include "hw/ppc/pnv_lpc.h"
28 #include "hw/ppc/pnv_xscom.h"
29 #include "hw/ppc/fdt.h"
40 /* OPB Master LS registers */
41 #define OPB_MASTER_LS_IRQ_STAT 0x50
42 #define OPB_MASTER_IRQ_LPC 0x00000800
43 #define OPB_MASTER_LS_IRQ_MASK 0x54
44 #define OPB_MASTER_LS_IRQ_POL 0x58
45 #define OPB_MASTER_LS_IRQ_INPUT 0x5c
47 /* LPC HC registers */
48 #define LPC_HC_FW_SEG_IDSEL 0x24
49 #define LPC_HC_FW_RD_ACC_SIZE 0x28
50 #define LPC_HC_FW_RD_1B 0x00000000
51 #define LPC_HC_FW_RD_2B 0x01000000
52 #define LPC_HC_FW_RD_4B 0x02000000
53 #define LPC_HC_FW_RD_16B 0x04000000
54 #define LPC_HC_FW_RD_128B 0x07000000
55 #define LPC_HC_IRQSER_CTRL 0x30
56 #define LPC_HC_IRQSER_EN 0x80000000
57 #define LPC_HC_IRQSER_QMODE 0x40000000
58 #define LPC_HC_IRQSER_START_MASK 0x03000000
59 #define LPC_HC_IRQSER_START_4CLK 0x00000000
60 #define LPC_HC_IRQSER_START_6CLK 0x01000000
61 #define LPC_HC_IRQSER_START_8CLK 0x02000000
62 #define LPC_HC_IRQMASK 0x34 /* same bit defs as LPC_HC_IRQSTAT */
63 #define LPC_HC_IRQSTAT 0x38
64 #define LPC_HC_IRQ_SERIRQ0 0x80000000 /* all bits down to ... */
65 #define LPC_HC_IRQ_SERIRQ16 0x00008000 /* IRQ16=IOCHK#, IRQ2=SMI# */
66 #define LPC_HC_IRQ_SERIRQ_ALL 0xffff8000
67 #define LPC_HC_IRQ_LRESET 0x00000400
68 #define LPC_HC_IRQ_SYNC_ABNORM_ERR 0x00000080
69 #define LPC_HC_IRQ_SYNC_NORESP_ERR 0x00000040
70 #define LPC_HC_IRQ_SYNC_NORM_ERR 0x00000020
71 #define LPC_HC_IRQ_SYNC_TIMEOUT_ERR 0x00000010
72 #define LPC_HC_IRQ_SYNC_TARG_TAR_ERR 0x00000008
73 #define LPC_HC_IRQ_SYNC_BM_TAR_ERR 0x00000004
74 #define LPC_HC_IRQ_SYNC_BM0_REQ 0x00000002
75 #define LPC_HC_IRQ_SYNC_BM1_REQ 0x00000001
76 #define LPC_HC_ERROR_ADDRESS 0x40
78 #define LPC_OPB_SIZE 0x100000000ull
80 #define ISA_IO_SIZE 0x00010000
81 #define ISA_MEM_SIZE 0x10000000
82 #define LPC_IO_OPB_ADDR 0xd0010000
83 #define LPC_IO_OPB_SIZE 0x00010000
84 #define LPC_MEM_OPB_ADDR 0xe0010000
85 #define LPC_MEM_OPB_SIZE 0x10000000
86 #define LPC_FW_OPB_ADDR 0xf0000000
87 #define LPC_FW_OPB_SIZE 0x10000000
89 #define LPC_OPB_REGS_OPB_ADDR 0xc0010000
90 #define LPC_OPB_REGS_OPB_SIZE 0x00002000
91 #define LPC_HC_REGS_OPB_ADDR 0xc0012000
92 #define LPC_HC_REGS_OPB_SIZE 0x00001000
96 * TODO: the "primary" cell should only be added on chip 0. This is
97 * how skiboot chooses the default LPC controller on multichip
100 * It would be easly done if we can change the populate() interface to
101 * replace the PnvXScomInterface parameter by a PnvChip one
103 static int pnv_lpc_populate(PnvXScomInterface
*dev
, void *fdt
, int xscom_offset
)
105 const char compat
[] = "ibm,power8-lpc\0ibm,lpc";
108 uint32_t lpc_pcba
= PNV_XSCOM_LPC_BASE
;
110 cpu_to_be32(lpc_pcba
),
111 cpu_to_be32(PNV_XSCOM_LPC_SIZE
)
114 name
= g_strdup_printf("isa@%x", lpc_pcba
);
115 offset
= fdt_add_subnode(fdt
, xscom_offset
, name
);
119 _FDT((fdt_setprop(fdt
, offset
, "reg", reg
, sizeof(reg
))));
120 _FDT((fdt_setprop_cell(fdt
, offset
, "#address-cells", 2)));
121 _FDT((fdt_setprop_cell(fdt
, offset
, "#size-cells", 1)));
122 _FDT((fdt_setprop(fdt
, offset
, "primary", NULL
, 0)));
123 _FDT((fdt_setprop(fdt
, offset
, "compatible", compat
, sizeof(compat
))));
128 * These read/write handlers of the OPB address space should be common
129 * with the P9 LPC Controller which uses direct MMIOs.
131 * TODO: rework to use address_space_stq() and address_space_ldq()
134 static bool opb_read(PnvLpcController
*lpc
, uint32_t addr
, uint8_t *data
,
139 /* XXX Handle access size limits and FW read caching here */
140 success
= !address_space_rw(&lpc
->opb_as
, addr
, MEMTXATTRS_UNSPECIFIED
,
146 static bool opb_write(PnvLpcController
*lpc
, uint32_t addr
, uint8_t *data
,
151 /* XXX Handle access size limits here */
152 success
= !address_space_rw(&lpc
->opb_as
, addr
, MEMTXATTRS_UNSPECIFIED
,
158 #define ECCB_CTL_READ (1ull << (63 - 15))
159 #define ECCB_CTL_SZ_LSH (63 - 7)
160 #define ECCB_CTL_SZ_MASK (0xfull << ECCB_CTL_SZ_LSH)
161 #define ECCB_CTL_ADDR_MASK 0xffffffffu;
163 #define ECCB_STAT_OP_DONE (1ull << (63 - 52))
164 #define ECCB_STAT_OP_ERR (1ull << (63 - 52))
165 #define ECCB_STAT_RD_DATA_LSH (63 - 37)
166 #define ECCB_STAT_RD_DATA_MASK (0xffffffff << ECCB_STAT_RD_DATA_LSH)
168 static void pnv_lpc_do_eccb(PnvLpcController
*lpc
, uint64_t cmd
)
170 /* XXX Check for magic bits at the top, addr size etc... */
171 unsigned int sz
= (cmd
& ECCB_CTL_SZ_MASK
) >> ECCB_CTL_SZ_LSH
;
172 uint32_t opb_addr
= cmd
& ECCB_CTL_ADDR_MASK
;
176 if (cmd
& ECCB_CTL_READ
) {
177 success
= opb_read(lpc
, opb_addr
, data
, sz
);
179 lpc
->eccb_stat_reg
= ECCB_STAT_OP_DONE
|
180 (((uint64_t)data
[0]) << 24 |
181 ((uint64_t)data
[1]) << 16 |
182 ((uint64_t)data
[2]) << 8 |
183 ((uint64_t)data
[3])) << ECCB_STAT_RD_DATA_LSH
;
185 lpc
->eccb_stat_reg
= ECCB_STAT_OP_DONE
|
186 (0xffffffffull
<< ECCB_STAT_RD_DATA_LSH
);
189 data
[0] = lpc
->eccb_data_reg
>> 24;
190 data
[1] = lpc
->eccb_data_reg
>> 16;
191 data
[2] = lpc
->eccb_data_reg
>> 8;
192 data
[3] = lpc
->eccb_data_reg
;
194 success
= opb_write(lpc
, opb_addr
, data
, sz
);
195 lpc
->eccb_stat_reg
= ECCB_STAT_OP_DONE
;
197 /* XXX Which error bit (if any) to signal OPB error ? */
200 static uint64_t pnv_lpc_xscom_read(void *opaque
, hwaddr addr
, unsigned size
)
202 PnvLpcController
*lpc
= PNV_LPC(opaque
);
203 uint32_t offset
= addr
>> 3;
206 switch (offset
& 3) {
212 val
= lpc
->eccb_stat_reg
;
213 lpc
->eccb_stat_reg
= 0;
216 val
= ((uint64_t)lpc
->eccb_data_reg
) << 32;
222 static void pnv_lpc_xscom_write(void *opaque
, hwaddr addr
,
223 uint64_t val
, unsigned size
)
225 PnvLpcController
*lpc
= PNV_LPC(opaque
);
226 uint32_t offset
= addr
>> 3;
228 switch (offset
& 3) {
230 pnv_lpc_do_eccb(lpc
, val
);
238 lpc
->eccb_data_reg
= val
>> 32;
243 static const MemoryRegionOps pnv_lpc_xscom_ops
= {
244 .read
= pnv_lpc_xscom_read
,
245 .write
= pnv_lpc_xscom_write
,
246 .valid
.min_access_size
= 8,
247 .valid
.max_access_size
= 8,
248 .impl
.min_access_size
= 8,
249 .impl
.max_access_size
= 8,
250 .endianness
= DEVICE_BIG_ENDIAN
,
253 static uint64_t lpc_hc_read(void *opaque
, hwaddr addr
, unsigned size
)
255 PnvLpcController
*lpc
= opaque
;
256 uint64_t val
= 0xfffffffffffffffful
;
259 case LPC_HC_FW_SEG_IDSEL
:
260 val
= lpc
->lpc_hc_fw_seg_idsel
;
262 case LPC_HC_FW_RD_ACC_SIZE
:
263 val
= lpc
->lpc_hc_fw_rd_acc_size
;
265 case LPC_HC_IRQSER_CTRL
:
266 val
= lpc
->lpc_hc_irqser_ctrl
;
269 val
= lpc
->lpc_hc_irqmask
;
272 val
= lpc
->lpc_hc_irqstat
;
274 case LPC_HC_ERROR_ADDRESS
:
275 val
= lpc
->lpc_hc_error_addr
;
278 qemu_log_mask(LOG_UNIMP
, "LPC HC Unimplemented register: Ox%"
279 HWADDR_PRIx
"\n", addr
);
284 static void lpc_hc_write(void *opaque
, hwaddr addr
, uint64_t val
,
287 PnvLpcController
*lpc
= opaque
;
289 /* XXX Filter out reserved bits */
292 case LPC_HC_FW_SEG_IDSEL
:
293 /* XXX Actually figure out how that works as this impact
294 * memory regions/aliases
296 lpc
->lpc_hc_fw_seg_idsel
= val
;
298 case LPC_HC_FW_RD_ACC_SIZE
:
299 lpc
->lpc_hc_fw_rd_acc_size
= val
;
301 case LPC_HC_IRQSER_CTRL
:
302 lpc
->lpc_hc_irqser_ctrl
= val
;
305 lpc
->lpc_hc_irqmask
= val
;
308 lpc
->lpc_hc_irqstat
&= ~val
;
310 case LPC_HC_ERROR_ADDRESS
:
313 qemu_log_mask(LOG_UNIMP
, "LPC HC Unimplemented register: Ox%"
314 HWADDR_PRIx
"\n", addr
);
318 static const MemoryRegionOps lpc_hc_ops
= {
320 .write
= lpc_hc_write
,
321 .endianness
= DEVICE_BIG_ENDIAN
,
323 .min_access_size
= 4,
324 .max_access_size
= 4,
327 .min_access_size
= 4,
328 .max_access_size
= 4,
332 static uint64_t opb_master_read(void *opaque
, hwaddr addr
, unsigned size
)
334 PnvLpcController
*lpc
= opaque
;
335 uint64_t val
= 0xfffffffffffffffful
;
338 case OPB_MASTER_LS_IRQ_STAT
:
339 val
= lpc
->opb_irq_stat
;
341 case OPB_MASTER_LS_IRQ_MASK
:
342 val
= lpc
->opb_irq_mask
;
344 case OPB_MASTER_LS_IRQ_POL
:
345 val
= lpc
->opb_irq_pol
;
347 case OPB_MASTER_LS_IRQ_INPUT
:
348 val
= lpc
->opb_irq_input
;
351 qemu_log_mask(LOG_UNIMP
, "OPB MASTER Unimplemented register: Ox%"
352 HWADDR_PRIx
"\n", addr
);
358 static void opb_master_write(void *opaque
, hwaddr addr
,
359 uint64_t val
, unsigned size
)
361 PnvLpcController
*lpc
= opaque
;
364 case OPB_MASTER_LS_IRQ_STAT
:
365 lpc
->opb_irq_stat
&= ~val
;
367 case OPB_MASTER_LS_IRQ_MASK
:
368 /* XXX Filter out reserved bits */
369 lpc
->opb_irq_mask
= val
;
371 case OPB_MASTER_LS_IRQ_POL
:
372 /* XXX Filter out reserved bits */
373 lpc
->opb_irq_pol
= val
;
375 case OPB_MASTER_LS_IRQ_INPUT
:
379 qemu_log_mask(LOG_UNIMP
, "OPB MASTER Unimplemented register: Ox%"
380 HWADDR_PRIx
"\n", addr
);
384 static const MemoryRegionOps opb_master_ops
= {
385 .read
= opb_master_read
,
386 .write
= opb_master_write
,
387 .endianness
= DEVICE_BIG_ENDIAN
,
389 .min_access_size
= 4,
390 .max_access_size
= 4,
393 .min_access_size
= 4,
394 .max_access_size
= 4,
398 static void pnv_lpc_realize(DeviceState
*dev
, Error
**errp
)
400 PnvLpcController
*lpc
= PNV_LPC(dev
);
403 lpc
->lpc_hc_fw_rd_acc_size
= LPC_HC_FW_RD_4B
;
405 /* Create address space and backing MR for the OPB bus */
406 memory_region_init(&lpc
->opb_mr
, OBJECT(dev
), "lpc-opb", 0x100000000ull
);
407 address_space_init(&lpc
->opb_as
, &lpc
->opb_mr
, "lpc-opb");
409 /* Create ISA IO and Mem space regions which are the root of
410 * the ISA bus (ie, ISA address spaces). We don't create a
411 * separate one for FW which we alias to memory.
413 memory_region_init(&lpc
->isa_io
, OBJECT(dev
), "isa-io", ISA_IO_SIZE
);
414 memory_region_init(&lpc
->isa_mem
, OBJECT(dev
), "isa-mem", ISA_MEM_SIZE
);
416 /* Create windows from the OPB space to the ISA space */
417 memory_region_init_alias(&lpc
->opb_isa_io
, OBJECT(dev
), "lpc-isa-io",
418 &lpc
->isa_io
, 0, LPC_IO_OPB_SIZE
);
419 memory_region_add_subregion(&lpc
->opb_mr
, LPC_IO_OPB_ADDR
,
421 memory_region_init_alias(&lpc
->opb_isa_mem
, OBJECT(dev
), "lpc-isa-mem",
422 &lpc
->isa_mem
, 0, LPC_MEM_OPB_SIZE
);
423 memory_region_add_subregion(&lpc
->opb_mr
, LPC_MEM_OPB_ADDR
,
425 memory_region_init_alias(&lpc
->opb_isa_fw
, OBJECT(dev
), "lpc-isa-fw",
426 &lpc
->isa_mem
, 0, LPC_FW_OPB_SIZE
);
427 memory_region_add_subregion(&lpc
->opb_mr
, LPC_FW_OPB_ADDR
,
430 /* Create MMIO regions for LPC HC and OPB registers */
431 memory_region_init_io(&lpc
->opb_master_regs
, OBJECT(dev
), &opb_master_ops
,
432 lpc
, "lpc-opb-master", LPC_OPB_REGS_OPB_SIZE
);
433 memory_region_add_subregion(&lpc
->opb_mr
, LPC_OPB_REGS_OPB_ADDR
,
434 &lpc
->opb_master_regs
);
435 memory_region_init_io(&lpc
->lpc_hc_regs
, OBJECT(dev
), &lpc_hc_ops
, lpc
,
436 "lpc-hc", LPC_HC_REGS_OPB_SIZE
);
437 memory_region_add_subregion(&lpc
->opb_mr
, LPC_HC_REGS_OPB_ADDR
,
440 /* XScom region for LPC registers */
441 pnv_xscom_region_init(&lpc
->xscom_regs
, OBJECT(dev
),
442 &pnv_lpc_xscom_ops
, lpc
, "xscom-lpc",
446 static void pnv_lpc_class_init(ObjectClass
*klass
, void *data
)
448 DeviceClass
*dc
= DEVICE_CLASS(klass
);
449 PnvXScomInterfaceClass
*xdc
= PNV_XSCOM_INTERFACE_CLASS(klass
);
451 xdc
->populate
= pnv_lpc_populate
;
453 dc
->realize
= pnv_lpc_realize
;
456 static const TypeInfo pnv_lpc_info
= {
457 .name
= TYPE_PNV_LPC
,
458 .parent
= TYPE_DEVICE
,
459 .instance_size
= sizeof(PnvLpcController
),
460 .class_init
= pnv_lpc_class_init
,
461 .interfaces
= (InterfaceInfo
[]) {
462 { TYPE_PNV_XSCOM_INTERFACE
},
467 static void pnv_lpc_register_types(void)
469 type_register_static(&pnv_lpc_info
);
472 type_init(pnv_lpc_register_types
)