hw/intc/arm_gicv3: Fix ICC register tracepoints
[qemu/ar7.git] / hw / sd / sdhci.c
blob01fbf228be49f179f0440b17574faac9ef405eed
1 /*
2 * SD Association Host Standard Specification v2.0 controller emulation
4 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
5 * Mitsyanko Igor <i.mitsyanko@samsung.com>
6 * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
8 * Based on MMC controller for Samsung S5PC1xx-based board emulation
9 * by Alexey Merkulov and Vladimir Monakhov.
11 * This program is free software; you can redistribute it and/or modify it
12 * under the terms of the GNU General Public License as published by the
13 * Free Software Foundation; either version 2 of the License, or (at your
14 * option) any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
19 * See the GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License along
22 * with this program; if not, see <http://www.gnu.org/licenses/>.
25 #include "qemu/osdep.h"
26 #include "hw/hw.h"
27 #include "sysemu/block-backend.h"
28 #include "sysemu/blockdev.h"
29 #include "sysemu/dma.h"
30 #include "qemu/timer.h"
31 #include "qemu/bitops.h"
32 #include "sdhci-internal.h"
33 #include "qemu/log.h"
35 /* host controller debug messages */
36 #ifndef SDHC_DEBUG
37 #define SDHC_DEBUG 0
38 #endif
40 #define DPRINT_L1(fmt, args...) \
41 do { \
42 if (SDHC_DEBUG) { \
43 fprintf(stderr, "QEMU SDHC: " fmt, ## args); \
44 } \
45 } while (0)
46 #define DPRINT_L2(fmt, args...) \
47 do { \
48 if (SDHC_DEBUG > 1) { \
49 fprintf(stderr, "QEMU SDHC: " fmt, ## args); \
50 } \
51 } while (0)
52 #define ERRPRINT(fmt, args...) \
53 do { \
54 if (SDHC_DEBUG) { \
55 fprintf(stderr, "QEMU SDHC ERROR: " fmt, ## args); \
56 } \
57 } while (0)
59 #define TYPE_SDHCI_BUS "sdhci-bus"
60 #define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS)
62 /* Default SD/MMC host controller features information, which will be
63 * presented in CAPABILITIES register of generic SD host controller at reset.
64 * If not stated otherwise:
65 * 0 - not supported, 1 - supported, other - prohibited.
67 #define SDHC_CAPAB_64BITBUS 0ul /* 64-bit System Bus Support */
68 #define SDHC_CAPAB_18V 1ul /* Voltage support 1.8v */
69 #define SDHC_CAPAB_30V 0ul /* Voltage support 3.0v */
70 #define SDHC_CAPAB_33V 1ul /* Voltage support 3.3v */
71 #define SDHC_CAPAB_SUSPRESUME 0ul /* Suspend/resume support */
72 #define SDHC_CAPAB_SDMA 1ul /* SDMA support */
73 #define SDHC_CAPAB_HIGHSPEED 1ul /* High speed support */
74 #define SDHC_CAPAB_ADMA1 1ul /* ADMA1 support */
75 #define SDHC_CAPAB_ADMA2 1ul /* ADMA2 support */
76 /* Maximum host controller R/W buffers size
77 * Possible values: 512, 1024, 2048 bytes */
78 #define SDHC_CAPAB_MAXBLOCKLENGTH 512ul
79 /* Maximum clock frequency for SDclock in MHz
80 * value in range 10-63 MHz, 0 - not defined */
81 #define SDHC_CAPAB_BASECLKFREQ 52ul
82 #define SDHC_CAPAB_TOUNIT 1ul /* Timeout clock unit 0 - kHz, 1 - MHz */
83 /* Timeout clock frequency 1-63, 0 - not defined */
84 #define SDHC_CAPAB_TOCLKFREQ 52ul
86 /* Now check all parameters and calculate CAPABILITIES REGISTER value */
87 #if SDHC_CAPAB_64BITBUS > 1 || SDHC_CAPAB_18V > 1 || SDHC_CAPAB_30V > 1 || \
88 SDHC_CAPAB_33V > 1 || SDHC_CAPAB_SUSPRESUME > 1 || SDHC_CAPAB_SDMA > 1 || \
89 SDHC_CAPAB_HIGHSPEED > 1 || SDHC_CAPAB_ADMA2 > 1 || SDHC_CAPAB_ADMA1 > 1 ||\
90 SDHC_CAPAB_TOUNIT > 1
91 #error Capabilities features can have value 0 or 1 only!
92 #endif
94 #if SDHC_CAPAB_MAXBLOCKLENGTH == 512
95 #define MAX_BLOCK_LENGTH 0ul
96 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 1024
97 #define MAX_BLOCK_LENGTH 1ul
98 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 2048
99 #define MAX_BLOCK_LENGTH 2ul
100 #else
101 #error Max host controller block size can have value 512, 1024 or 2048 only!
102 #endif
104 #if (SDHC_CAPAB_BASECLKFREQ > 0 && SDHC_CAPAB_BASECLKFREQ < 10) || \
105 SDHC_CAPAB_BASECLKFREQ > 63
106 #error SDclock frequency can have value in range 0, 10-63 only!
107 #endif
109 #if SDHC_CAPAB_TOCLKFREQ > 63
110 #error Timeout clock frequency can have value in range 0-63 only!
111 #endif
113 #define SDHC_CAPAB_REG_DEFAULT \
114 ((SDHC_CAPAB_64BITBUS << 28) | (SDHC_CAPAB_18V << 26) | \
115 (SDHC_CAPAB_30V << 25) | (SDHC_CAPAB_33V << 24) | \
116 (SDHC_CAPAB_SUSPRESUME << 23) | (SDHC_CAPAB_SDMA << 22) | \
117 (SDHC_CAPAB_HIGHSPEED << 21) | (SDHC_CAPAB_ADMA1 << 20) | \
118 (SDHC_CAPAB_ADMA2 << 19) | (MAX_BLOCK_LENGTH << 16) | \
119 (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \
120 (SDHC_CAPAB_TOCLKFREQ))
122 #define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val))
124 static uint8_t sdhci_slotint(SDHCIState *s)
126 return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) ||
127 ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) ||
128 ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV));
131 static inline void sdhci_update_irq(SDHCIState *s)
133 qemu_set_irq(s->irq, sdhci_slotint(s));
136 static void sdhci_raise_insertion_irq(void *opaque)
138 SDHCIState *s = (SDHCIState *)opaque;
140 if (s->norintsts & SDHC_NIS_REMOVE) {
141 timer_mod(s->insert_timer,
142 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
143 } else {
144 s->prnsts = 0x1ff0000;
145 if (s->norintstsen & SDHC_NISEN_INSERT) {
146 s->norintsts |= SDHC_NIS_INSERT;
148 sdhci_update_irq(s);
152 static void sdhci_set_inserted(DeviceState *dev, bool level)
154 SDHCIState *s = (SDHCIState *)dev;
155 DPRINT_L1("Card state changed: %s!\n", level ? "insert" : "eject");
157 if ((s->norintsts & SDHC_NIS_REMOVE) && level) {
158 /* Give target some time to notice card ejection */
159 timer_mod(s->insert_timer,
160 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY);
161 } else {
162 if (level) {
163 s->prnsts = 0x1ff0000;
164 if (s->norintstsen & SDHC_NISEN_INSERT) {
165 s->norintsts |= SDHC_NIS_INSERT;
167 } else {
168 s->prnsts = 0x1fa0000;
169 s->pwrcon &= ~SDHC_POWER_ON;
170 s->clkcon &= ~SDHC_CLOCK_SDCLK_EN;
171 if (s->norintstsen & SDHC_NISEN_REMOVE) {
172 s->norintsts |= SDHC_NIS_REMOVE;
175 sdhci_update_irq(s);
179 static void sdhci_set_readonly(DeviceState *dev, bool level)
181 SDHCIState *s = (SDHCIState *)dev;
183 if (level) {
184 s->prnsts &= ~SDHC_WRITE_PROTECT;
185 } else {
186 /* Write enabled */
187 s->prnsts |= SDHC_WRITE_PROTECT;
191 static void sdhci_reset(SDHCIState *s)
193 DeviceState *dev = DEVICE(s);
195 timer_del(s->insert_timer);
196 timer_del(s->transfer_timer);
197 /* Set all registers to 0. Capabilities registers are not cleared
198 * and assumed to always preserve their value, given to them during
199 * initialization */
200 memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
202 /* Reset other state based on current card insertion/readonly status */
203 sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus));
204 sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus));
206 s->data_count = 0;
207 s->stopped_state = sdhc_not_stopped;
208 s->pending_insert_state = false;
211 static void sdhci_poweron_reset(DeviceState *dev)
213 /* QOM (ie power-on) reset. This is identical to reset
214 * commanded via device register apart from handling of the
215 * 'pending insert on powerup' quirk.
217 SDHCIState *s = (SDHCIState *)dev;
219 sdhci_reset(s);
221 if (s->pending_insert_quirk) {
222 s->pending_insert_state = true;
226 static void sdhci_data_transfer(void *opaque);
228 static void sdhci_send_command(SDHCIState *s)
230 SDRequest request;
231 uint8_t response[16];
232 int rlen;
234 s->errintsts = 0;
235 s->acmd12errsts = 0;
236 request.cmd = s->cmdreg >> 8;
237 request.arg = s->argument;
238 DPRINT_L1("sending CMD%u ARG[0x%08x]\n", request.cmd, request.arg);
239 rlen = sdbus_do_command(&s->sdbus, &request, response);
241 if (s->cmdreg & SDHC_CMD_RESPONSE) {
242 if (rlen == 4) {
243 s->rspreg[0] = (response[0] << 24) | (response[1] << 16) |
244 (response[2] << 8) | response[3];
245 s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0;
246 DPRINT_L1("Response: RSPREG[31..0]=0x%08x\n", s->rspreg[0]);
247 } else if (rlen == 16) {
248 s->rspreg[0] = (response[11] << 24) | (response[12] << 16) |
249 (response[13] << 8) | response[14];
250 s->rspreg[1] = (response[7] << 24) | (response[8] << 16) |
251 (response[9] << 8) | response[10];
252 s->rspreg[2] = (response[3] << 24) | (response[4] << 16) |
253 (response[5] << 8) | response[6];
254 s->rspreg[3] = (response[0] << 16) | (response[1] << 8) |
255 response[2];
256 DPRINT_L1("Response received:\n RSPREG[127..96]=0x%08x, RSPREG[95.."
257 "64]=0x%08x,\n RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x\n",
258 s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]);
259 } else {
260 ERRPRINT("Timeout waiting for command response\n");
261 if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) {
262 s->errintsts |= SDHC_EIS_CMDTIMEOUT;
263 s->norintsts |= SDHC_NIS_ERR;
267 if ((s->norintstsen & SDHC_NISEN_TRSCMP) &&
268 (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) {
269 s->norintsts |= SDHC_NIS_TRSCMP;
273 if (s->norintstsen & SDHC_NISEN_CMDCMP) {
274 s->norintsts |= SDHC_NIS_CMDCMP;
277 sdhci_update_irq(s);
279 if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) {
280 s->data_count = 0;
281 sdhci_data_transfer(s);
285 static void sdhci_end_transfer(SDHCIState *s)
287 /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */
288 if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) {
289 SDRequest request;
290 uint8_t response[16];
292 request.cmd = 0x0C;
293 request.arg = 0;
294 DPRINT_L1("Automatically issue CMD%d %08x\n", request.cmd, request.arg);
295 sdbus_do_command(&s->sdbus, &request, response);
296 /* Auto CMD12 response goes to the upper Response register */
297 s->rspreg[3] = (response[0] << 24) | (response[1] << 16) |
298 (response[2] << 8) | response[3];
301 s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE |
302 SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT |
303 SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE);
305 if (s->norintstsen & SDHC_NISEN_TRSCMP) {
306 s->norintsts |= SDHC_NIS_TRSCMP;
309 sdhci_update_irq(s);
313 * Programmed i/o data transfer
316 /* Fill host controller's read buffer with BLKSIZE bytes of data from card */
317 static void sdhci_read_block_from_card(SDHCIState *s)
319 int index = 0;
321 if ((s->trnmod & SDHC_TRNS_MULTI) &&
322 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) {
323 return;
326 for (index = 0; index < (s->blksize & 0x0fff); index++) {
327 s->fifo_buffer[index] = sdbus_read_data(&s->sdbus);
330 /* New data now available for READ through Buffer Port Register */
331 s->prnsts |= SDHC_DATA_AVAILABLE;
332 if (s->norintstsen & SDHC_NISEN_RBUFRDY) {
333 s->norintsts |= SDHC_NIS_RBUFRDY;
336 /* Clear DAT line active status if that was the last block */
337 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
338 ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) {
339 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
342 /* If stop at block gap request was set and it's not the last block of
343 * data - generate Block Event interrupt */
344 if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) &&
345 s->blkcnt != 1) {
346 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
347 if (s->norintstsen & SDHC_EISEN_BLKGAP) {
348 s->norintsts |= SDHC_EIS_BLKGAP;
352 sdhci_update_irq(s);
355 /* Read @size byte of data from host controller @s BUFFER DATA PORT register */
356 static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size)
358 uint32_t value = 0;
359 int i;
361 /* first check that a valid data exists in host controller input buffer */
362 if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) {
363 ERRPRINT("Trying to read from empty buffer\n");
364 return 0;
367 for (i = 0; i < size; i++) {
368 value |= s->fifo_buffer[s->data_count] << i * 8;
369 s->data_count++;
370 /* check if we've read all valid data (blksize bytes) from buffer */
371 if ((s->data_count) >= (s->blksize & 0x0fff)) {
372 DPRINT_L2("All %u bytes of data have been read from input buffer\n",
373 s->data_count);
374 s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */
375 s->data_count = 0; /* next buff read must start at position [0] */
377 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
378 s->blkcnt--;
381 /* if that was the last block of data */
382 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
383 ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) ||
384 /* stop at gap request */
385 (s->stopped_state == sdhc_gap_read &&
386 !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) {
387 sdhci_end_transfer(s);
388 } else { /* if there are more data, read next block from card */
389 sdhci_read_block_from_card(s);
391 break;
395 return value;
398 /* Write data from host controller FIFO to card */
399 static void sdhci_write_block_to_card(SDHCIState *s)
401 int index = 0;
403 if (s->prnsts & SDHC_SPACE_AVAILABLE) {
404 if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
405 s->norintsts |= SDHC_NIS_WBUFRDY;
407 sdhci_update_irq(s);
408 return;
411 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
412 if (s->blkcnt == 0) {
413 return;
414 } else {
415 s->blkcnt--;
419 for (index = 0; index < (s->blksize & 0x0fff); index++) {
420 sdbus_write_data(&s->sdbus, s->fifo_buffer[index]);
423 /* Next data can be written through BUFFER DATORT register */
424 s->prnsts |= SDHC_SPACE_AVAILABLE;
426 /* Finish transfer if that was the last block of data */
427 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
428 ((s->trnmod & SDHC_TRNS_MULTI) &&
429 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) {
430 sdhci_end_transfer(s);
431 } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
432 s->norintsts |= SDHC_NIS_WBUFRDY;
435 /* Generate Block Gap Event if requested and if not the last block */
436 if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) &&
437 s->blkcnt > 0) {
438 s->prnsts &= ~SDHC_DOING_WRITE;
439 if (s->norintstsen & SDHC_EISEN_BLKGAP) {
440 s->norintsts |= SDHC_EIS_BLKGAP;
442 sdhci_end_transfer(s);
445 sdhci_update_irq(s);
448 /* Write @size bytes of @value data to host controller @s Buffer Data Port
449 * register */
450 static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size)
452 unsigned i;
454 /* Check that there is free space left in a buffer */
455 if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) {
456 ERRPRINT("Can't write to data buffer: buffer full\n");
457 return;
460 for (i = 0; i < size; i++) {
461 s->fifo_buffer[s->data_count] = value & 0xFF;
462 s->data_count++;
463 value >>= 8;
464 if (s->data_count >= (s->blksize & 0x0fff)) {
465 DPRINT_L2("write buffer filled with %u bytes of data\n",
466 s->data_count);
467 s->data_count = 0;
468 s->prnsts &= ~SDHC_SPACE_AVAILABLE;
469 if (s->prnsts & SDHC_DOING_WRITE) {
470 sdhci_write_block_to_card(s);
477 * Single DMA data transfer
480 /* Multi block SDMA transfer */
481 static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
483 bool page_aligned = false;
484 unsigned int n, begin;
485 const uint16_t block_size = s->blksize & 0x0fff;
486 uint32_t boundary_chk = 1 << (((s->blksize & 0xf000) >> 12) + 12);
487 uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk);
489 /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for
490 * possible stop at page boundary if initial address is not page aligned,
491 * allow them to work properly */
492 if ((s->sdmasysad % boundary_chk) == 0) {
493 page_aligned = true;
496 if (s->trnmod & SDHC_TRNS_READ) {
497 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
498 SDHC_DAT_LINE_ACTIVE;
499 while (s->blkcnt) {
500 if (s->data_count == 0) {
501 for (n = 0; n < block_size; n++) {
502 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
505 begin = s->data_count;
506 if (((boundary_count + begin) < block_size) && page_aligned) {
507 s->data_count = boundary_count + begin;
508 boundary_count = 0;
509 } else {
510 s->data_count = block_size;
511 boundary_count -= block_size - begin;
512 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
513 s->blkcnt--;
516 dma_memory_write(&address_space_memory, s->sdmasysad,
517 &s->fifo_buffer[begin], s->data_count - begin);
518 s->sdmasysad += s->data_count - begin;
519 if (s->data_count == block_size) {
520 s->data_count = 0;
522 if (page_aligned && boundary_count == 0) {
523 break;
526 } else {
527 s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT |
528 SDHC_DAT_LINE_ACTIVE;
529 while (s->blkcnt) {
530 begin = s->data_count;
531 if (((boundary_count + begin) < block_size) && page_aligned) {
532 s->data_count = boundary_count + begin;
533 boundary_count = 0;
534 } else {
535 s->data_count = block_size;
536 boundary_count -= block_size - begin;
538 dma_memory_read(&address_space_memory, s->sdmasysad,
539 &s->fifo_buffer[begin], s->data_count);
540 s->sdmasysad += s->data_count - begin;
541 if (s->data_count == block_size) {
542 for (n = 0; n < block_size; n++) {
543 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
545 s->data_count = 0;
546 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
547 s->blkcnt--;
550 if (page_aligned && boundary_count == 0) {
551 break;
556 if (s->blkcnt == 0) {
557 sdhci_end_transfer(s);
558 } else {
559 if (s->norintstsen & SDHC_NISEN_DMA) {
560 s->norintsts |= SDHC_NIS_DMA;
562 sdhci_update_irq(s);
566 /* single block SDMA transfer */
568 static void sdhci_sdma_transfer_single_block(SDHCIState *s)
570 int n;
571 uint32_t datacnt = s->blksize & 0x0fff;
573 if (s->trnmod & SDHC_TRNS_READ) {
574 for (n = 0; n < datacnt; n++) {
575 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
577 dma_memory_write(&address_space_memory, s->sdmasysad, s->fifo_buffer,
578 datacnt);
579 } else {
580 dma_memory_read(&address_space_memory, s->sdmasysad, s->fifo_buffer,
581 datacnt);
582 for (n = 0; n < datacnt; n++) {
583 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
587 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
588 s->blkcnt--;
591 sdhci_end_transfer(s);
594 typedef struct ADMADescr {
595 hwaddr addr;
596 uint16_t length;
597 uint8_t attr;
598 uint8_t incr;
599 } ADMADescr;
601 static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
603 uint32_t adma1 = 0;
604 uint64_t adma2 = 0;
605 hwaddr entry_addr = (hwaddr)s->admasysaddr;
606 switch (SDHC_DMA_TYPE(s->hostctl)) {
607 case SDHC_CTRL_ADMA2_32:
608 dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma2,
609 sizeof(adma2));
610 adma2 = le64_to_cpu(adma2);
611 /* The spec does not specify endianness of descriptor table.
612 * We currently assume that it is LE.
614 dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull;
615 dscr->length = (uint16_t)extract64(adma2, 16, 16);
616 dscr->attr = (uint8_t)extract64(adma2, 0, 7);
617 dscr->incr = 8;
618 break;
619 case SDHC_CTRL_ADMA1_32:
620 dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma1,
621 sizeof(adma1));
622 adma1 = le32_to_cpu(adma1);
623 dscr->addr = (hwaddr)(adma1 & 0xFFFFF000);
624 dscr->attr = (uint8_t)extract32(adma1, 0, 7);
625 dscr->incr = 4;
626 if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) {
627 dscr->length = (uint16_t)extract32(adma1, 12, 16);
628 } else {
629 dscr->length = 4096;
631 break;
632 case SDHC_CTRL_ADMA2_64:
633 dma_memory_read(&address_space_memory, entry_addr,
634 (uint8_t *)(&dscr->attr), 1);
635 dma_memory_read(&address_space_memory, entry_addr + 2,
636 (uint8_t *)(&dscr->length), 2);
637 dscr->length = le16_to_cpu(dscr->length);
638 dma_memory_read(&address_space_memory, entry_addr + 4,
639 (uint8_t *)(&dscr->addr), 8);
640 dscr->attr = le64_to_cpu(dscr->attr);
641 dscr->attr &= 0xfffffff8;
642 dscr->incr = 12;
643 break;
647 /* Advanced DMA data transfer */
649 static void sdhci_do_adma(SDHCIState *s)
651 unsigned int n, begin, length;
652 const uint16_t block_size = s->blksize & 0x0fff;
653 ADMADescr dscr;
654 int i;
656 for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) {
657 s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH;
659 get_adma_description(s, &dscr);
660 DPRINT_L2("ADMA loop: addr=" TARGET_FMT_plx ", len=%d, attr=%x\n",
661 dscr.addr, dscr.length, dscr.attr);
663 if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) {
664 /* Indicate that error occurred in ST_FDS state */
665 s->admaerr &= ~SDHC_ADMAERR_STATE_MASK;
666 s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS;
668 /* Generate ADMA error interrupt */
669 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
670 s->errintsts |= SDHC_EIS_ADMAERR;
671 s->norintsts |= SDHC_NIS_ERR;
674 sdhci_update_irq(s);
675 return;
678 length = dscr.length ? dscr.length : 65536;
680 switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) {
681 case SDHC_ADMA_ATTR_ACT_TRAN: /* data transfer */
683 if (s->trnmod & SDHC_TRNS_READ) {
684 while (length) {
685 if (s->data_count == 0) {
686 for (n = 0; n < block_size; n++) {
687 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus);
690 begin = s->data_count;
691 if ((length + begin) < block_size) {
692 s->data_count = length + begin;
693 length = 0;
694 } else {
695 s->data_count = block_size;
696 length -= block_size - begin;
698 dma_memory_write(&address_space_memory, dscr.addr,
699 &s->fifo_buffer[begin],
700 s->data_count - begin);
701 dscr.addr += s->data_count - begin;
702 if (s->data_count == block_size) {
703 s->data_count = 0;
704 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
705 s->blkcnt--;
706 if (s->blkcnt == 0) {
707 break;
712 } else {
713 while (length) {
714 begin = s->data_count;
715 if ((length + begin) < block_size) {
716 s->data_count = length + begin;
717 length = 0;
718 } else {
719 s->data_count = block_size;
720 length -= block_size - begin;
722 dma_memory_read(&address_space_memory, dscr.addr,
723 &s->fifo_buffer[begin],
724 s->data_count - begin);
725 dscr.addr += s->data_count - begin;
726 if (s->data_count == block_size) {
727 for (n = 0; n < block_size; n++) {
728 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]);
730 s->data_count = 0;
731 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
732 s->blkcnt--;
733 if (s->blkcnt == 0) {
734 break;
740 s->admasysaddr += dscr.incr;
741 break;
742 case SDHC_ADMA_ATTR_ACT_LINK: /* link to next descriptor table */
743 s->admasysaddr = dscr.addr;
744 DPRINT_L1("ADMA link: admasysaddr=0x%" PRIx64 "\n",
745 s->admasysaddr);
746 break;
747 default:
748 s->admasysaddr += dscr.incr;
749 break;
752 if (dscr.attr & SDHC_ADMA_ATTR_INT) {
753 DPRINT_L1("ADMA interrupt: admasysaddr=0x%" PRIx64 "\n",
754 s->admasysaddr);
755 if (s->norintstsen & SDHC_NISEN_DMA) {
756 s->norintsts |= SDHC_NIS_DMA;
759 sdhci_update_irq(s);
762 /* ADMA transfer terminates if blkcnt == 0 or by END attribute */
763 if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
764 (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) {
765 DPRINT_L2("ADMA transfer completed\n");
766 if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) &&
767 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
768 s->blkcnt != 0)) {
769 ERRPRINT("SD/MMC host ADMA length mismatch\n");
770 s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH |
771 SDHC_ADMAERR_STATE_ST_TFR;
772 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
773 ERRPRINT("Set ADMA error flag\n");
774 s->errintsts |= SDHC_EIS_ADMAERR;
775 s->norintsts |= SDHC_NIS_ERR;
778 sdhci_update_irq(s);
780 sdhci_end_transfer(s);
781 return;
786 /* we have unfinished business - reschedule to continue ADMA */
787 timer_mod(s->transfer_timer,
788 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_TRANSFER_DELAY);
791 /* Perform data transfer according to controller configuration */
793 static void sdhci_data_transfer(void *opaque)
795 SDHCIState *s = (SDHCIState *)opaque;
797 if (s->trnmod & SDHC_TRNS_DMA) {
798 switch (SDHC_DMA_TYPE(s->hostctl)) {
799 case SDHC_CTRL_SDMA:
800 if ((s->trnmod & SDHC_TRNS_MULTI) &&
801 (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || s->blkcnt == 0)) {
802 break;
805 if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) {
806 sdhci_sdma_transfer_single_block(s);
807 } else {
808 sdhci_sdma_transfer_multi_blocks(s);
811 break;
812 case SDHC_CTRL_ADMA1_32:
813 if (!(s->capareg & SDHC_CAN_DO_ADMA1)) {
814 ERRPRINT("ADMA1 not supported\n");
815 break;
818 sdhci_do_adma(s);
819 break;
820 case SDHC_CTRL_ADMA2_32:
821 if (!(s->capareg & SDHC_CAN_DO_ADMA2)) {
822 ERRPRINT("ADMA2 not supported\n");
823 break;
826 sdhci_do_adma(s);
827 break;
828 case SDHC_CTRL_ADMA2_64:
829 if (!(s->capareg & SDHC_CAN_DO_ADMA2) ||
830 !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) {
831 ERRPRINT("64 bit ADMA not supported\n");
832 break;
835 sdhci_do_adma(s);
836 break;
837 default:
838 ERRPRINT("Unsupported DMA type\n");
839 break;
841 } else {
842 if ((s->trnmod & SDHC_TRNS_READ) && sdbus_data_ready(&s->sdbus)) {
843 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
844 SDHC_DAT_LINE_ACTIVE;
845 sdhci_read_block_from_card(s);
846 } else {
847 s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE |
848 SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT;
849 sdhci_write_block_to_card(s);
854 static bool sdhci_can_issue_command(SDHCIState *s)
856 if (!SDHC_CLOCK_IS_ON(s->clkcon) ||
857 (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) &&
858 ((s->cmdreg & SDHC_CMD_DATA_PRESENT) ||
859 ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY &&
860 !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) {
861 return false;
864 return true;
867 /* The Buffer Data Port register must be accessed in sequential and
868 * continuous manner */
869 static inline bool
870 sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num)
872 if ((s->data_count & 0x3) != byte_num) {
873 ERRPRINT("Non-sequential access to Buffer Data Port register"
874 "is prohibited\n");
875 return false;
877 return true;
880 static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size)
882 SDHCIState *s = (SDHCIState *)opaque;
883 uint32_t ret = 0;
885 switch (offset & ~0x3) {
886 case SDHC_SYSAD:
887 ret = s->sdmasysad;
888 break;
889 case SDHC_BLKSIZE:
890 ret = s->blksize | (s->blkcnt << 16);
891 break;
892 case SDHC_ARGUMENT:
893 ret = s->argument;
894 break;
895 case SDHC_TRNMOD:
896 ret = s->trnmod | (s->cmdreg << 16);
897 break;
898 case SDHC_RSPREG0 ... SDHC_RSPREG3:
899 ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2];
900 break;
901 case SDHC_BDATA:
902 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
903 ret = sdhci_read_dataport(s, size);
904 DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset,
905 ret, ret);
906 return ret;
908 break;
909 case SDHC_PRNSTS:
910 ret = s->prnsts;
911 break;
912 case SDHC_HOSTCTL:
913 ret = s->hostctl | (s->pwrcon << 8) | (s->blkgap << 16) |
914 (s->wakcon << 24);
915 break;
916 case SDHC_CLKCON:
917 ret = s->clkcon | (s->timeoutcon << 16);
918 break;
919 case SDHC_NORINTSTS:
920 ret = s->norintsts | (s->errintsts << 16);
921 break;
922 case SDHC_NORINTSTSEN:
923 ret = s->norintstsen | (s->errintstsen << 16);
924 break;
925 case SDHC_NORINTSIGEN:
926 ret = s->norintsigen | (s->errintsigen << 16);
927 break;
928 case SDHC_ACMD12ERRSTS:
929 ret = s->acmd12errsts;
930 break;
931 case SDHC_CAPAREG:
932 ret = s->capareg;
933 break;
934 case SDHC_MAXCURR:
935 ret = s->maxcurr;
936 break;
937 case SDHC_ADMAERR:
938 ret = s->admaerr;
939 break;
940 case SDHC_ADMASYSADDR:
941 ret = (uint32_t)s->admasysaddr;
942 break;
943 case SDHC_ADMASYSADDR + 4:
944 ret = (uint32_t)(s->admasysaddr >> 32);
945 break;
946 case SDHC_SLOT_INT_STATUS:
947 ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s);
948 break;
949 default:
950 ERRPRINT("bad %ub read: addr[0x%04x]\n", size, (int)offset);
951 break;
954 ret >>= (offset & 0x3) * 8;
955 ret &= (1ULL << (size * 8)) - 1;
956 DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset, ret, ret);
957 return ret;
960 static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value)
962 if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) {
963 return;
965 s->blkgap = value & SDHC_STOP_AT_GAP_REQ;
967 if ((value & SDHC_CONTINUE_REQ) && s->stopped_state &&
968 (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) {
969 if (s->stopped_state == sdhc_gap_read) {
970 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ;
971 sdhci_read_block_from_card(s);
972 } else {
973 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE;
974 sdhci_write_block_to_card(s);
976 s->stopped_state = sdhc_not_stopped;
977 } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) {
978 if (s->prnsts & SDHC_DOING_READ) {
979 s->stopped_state = sdhc_gap_read;
980 } else if (s->prnsts & SDHC_DOING_WRITE) {
981 s->stopped_state = sdhc_gap_write;
986 static inline void sdhci_reset_write(SDHCIState *s, uint8_t value)
988 switch (value) {
989 case SDHC_RESET_ALL:
990 sdhci_reset(s);
991 break;
992 case SDHC_RESET_CMD:
993 s->prnsts &= ~SDHC_CMD_INHIBIT;
994 s->norintsts &= ~SDHC_NIS_CMDCMP;
995 break;
996 case SDHC_RESET_DATA:
997 s->data_count = 0;
998 s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE |
999 SDHC_DOING_READ | SDHC_DOING_WRITE |
1000 SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE);
1001 s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ);
1002 s->stopped_state = sdhc_not_stopped;
1003 s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY |
1004 SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP);
1005 break;
1009 static void
1010 sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size)
1012 SDHCIState *s = (SDHCIState *)opaque;
1013 unsigned shift = 8 * (offset & 0x3);
1014 uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift);
1015 uint32_t value = val;
1016 value <<= shift;
1018 switch (offset & ~0x3) {
1019 case SDHC_SYSAD:
1020 s->sdmasysad = (s->sdmasysad & mask) | value;
1021 MASKED_WRITE(s->sdmasysad, mask, value);
1022 /* Writing to last byte of sdmasysad might trigger transfer */
1023 if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt &&
1024 s->blksize && SDHC_DMA_TYPE(s->hostctl) == SDHC_CTRL_SDMA) {
1025 sdhci_sdma_transfer_multi_blocks(s);
1027 break;
1028 case SDHC_BLKSIZE:
1029 if (!TRANSFERRING_DATA(s->prnsts)) {
1030 MASKED_WRITE(s->blksize, mask, value);
1031 MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16);
1034 /* Limit block size to the maximum buffer size */
1035 if (extract32(s->blksize, 0, 12) > s->buf_maxsz) {
1036 qemu_log_mask(LOG_GUEST_ERROR, "%s: Size 0x%x is larger than " \
1037 "the maximum buffer 0x%x", __func__, s->blksize,
1038 s->buf_maxsz);
1040 s->blksize = deposit32(s->blksize, 0, 12, s->buf_maxsz);
1043 break;
1044 case SDHC_ARGUMENT:
1045 MASKED_WRITE(s->argument, mask, value);
1046 break;
1047 case SDHC_TRNMOD:
1048 /* DMA can be enabled only if it is supported as indicated by
1049 * capabilities register */
1050 if (!(s->capareg & SDHC_CAN_DO_DMA)) {
1051 value &= ~SDHC_TRNS_DMA;
1053 MASKED_WRITE(s->trnmod, mask, value);
1054 MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16);
1056 /* Writing to the upper byte of CMDREG triggers SD command generation */
1057 if ((mask & 0xFF000000) || !sdhci_can_issue_command(s)) {
1058 break;
1061 sdhci_send_command(s);
1062 break;
1063 case SDHC_BDATA:
1064 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
1065 sdhci_write_dataport(s, value >> shift, size);
1067 break;
1068 case SDHC_HOSTCTL:
1069 if (!(mask & 0xFF0000)) {
1070 sdhci_blkgap_write(s, value >> 16);
1072 MASKED_WRITE(s->hostctl, mask, value);
1073 MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8);
1074 MASKED_WRITE(s->wakcon, mask >> 24, value >> 24);
1075 if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 ||
1076 !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) {
1077 s->pwrcon &= ~SDHC_POWER_ON;
1079 break;
1080 case SDHC_CLKCON:
1081 if (!(mask & 0xFF000000)) {
1082 sdhci_reset_write(s, value >> 24);
1084 MASKED_WRITE(s->clkcon, mask, value);
1085 MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16);
1086 if (s->clkcon & SDHC_CLOCK_INT_EN) {
1087 s->clkcon |= SDHC_CLOCK_INT_STABLE;
1088 } else {
1089 s->clkcon &= ~SDHC_CLOCK_INT_STABLE;
1091 break;
1092 case SDHC_NORINTSTS:
1093 if (s->norintstsen & SDHC_NISEN_CARDINT) {
1094 value &= ~SDHC_NIS_CARDINT;
1096 s->norintsts &= mask | ~value;
1097 s->errintsts &= (mask >> 16) | ~(value >> 16);
1098 if (s->errintsts) {
1099 s->norintsts |= SDHC_NIS_ERR;
1100 } else {
1101 s->norintsts &= ~SDHC_NIS_ERR;
1103 sdhci_update_irq(s);
1104 break;
1105 case SDHC_NORINTSTSEN:
1106 MASKED_WRITE(s->norintstsen, mask, value);
1107 MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16);
1108 s->norintsts &= s->norintstsen;
1109 s->errintsts &= s->errintstsen;
1110 if (s->errintsts) {
1111 s->norintsts |= SDHC_NIS_ERR;
1112 } else {
1113 s->norintsts &= ~SDHC_NIS_ERR;
1115 /* Quirk for Raspberry Pi: pending card insert interrupt
1116 * appears when first enabled after power on */
1117 if ((s->norintstsen & SDHC_NISEN_INSERT) && s->pending_insert_state) {
1118 assert(s->pending_insert_quirk);
1119 s->norintsts |= SDHC_NIS_INSERT;
1120 s->pending_insert_state = false;
1122 sdhci_update_irq(s);
1123 break;
1124 case SDHC_NORINTSIGEN:
1125 MASKED_WRITE(s->norintsigen, mask, value);
1126 MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16);
1127 sdhci_update_irq(s);
1128 break;
1129 case SDHC_ADMAERR:
1130 MASKED_WRITE(s->admaerr, mask, value);
1131 break;
1132 case SDHC_ADMASYSADDR:
1133 s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL |
1134 (uint64_t)mask)) | (uint64_t)value;
1135 break;
1136 case SDHC_ADMASYSADDR + 4:
1137 s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL |
1138 ((uint64_t)mask << 32))) | ((uint64_t)value << 32);
1139 break;
1140 case SDHC_FEAER:
1141 s->acmd12errsts |= value;
1142 s->errintsts |= (value >> 16) & s->errintstsen;
1143 if (s->acmd12errsts) {
1144 s->errintsts |= SDHC_EIS_CMD12ERR;
1146 if (s->errintsts) {
1147 s->norintsts |= SDHC_NIS_ERR;
1149 sdhci_update_irq(s);
1150 break;
1151 default:
1152 ERRPRINT("bad %ub write offset: addr[0x%04x] <- %u(0x%x)\n",
1153 size, (int)offset, value >> shift, value >> shift);
1154 break;
1156 DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n",
1157 size, (int)offset, value >> shift, value >> shift);
1160 static const MemoryRegionOps sdhci_mmio_ops = {
1161 .read = sdhci_read,
1162 .write = sdhci_write,
1163 .valid = {
1164 .min_access_size = 1,
1165 .max_access_size = 4,
1166 .unaligned = false
1168 .endianness = DEVICE_LITTLE_ENDIAN,
1171 static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
1173 switch (SDHC_CAPAB_BLOCKSIZE(s->capareg)) {
1174 case 0:
1175 return 512;
1176 case 1:
1177 return 1024;
1178 case 2:
1179 return 2048;
1180 default:
1181 hw_error("SDHC: unsupported value for maximum block size\n");
1182 return 0;
1186 static void sdhci_initfn(SDHCIState *s)
1188 qbus_create_inplace(&s->sdbus, sizeof(s->sdbus),
1189 TYPE_SDHCI_BUS, DEVICE(s), "sd-bus");
1191 s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s);
1192 s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s);
1195 static void sdhci_uninitfn(SDHCIState *s)
1197 timer_del(s->insert_timer);
1198 timer_free(s->insert_timer);
1199 timer_del(s->transfer_timer);
1200 timer_free(s->transfer_timer);
1201 qemu_free_irq(s->eject_cb);
1202 qemu_free_irq(s->ro_cb);
1204 g_free(s->fifo_buffer);
1205 s->fifo_buffer = NULL;
1208 static bool sdhci_pending_insert_vmstate_needed(void *opaque)
1210 SDHCIState *s = opaque;
1212 return s->pending_insert_state;
1215 static const VMStateDescription sdhci_pending_insert_vmstate = {
1216 .name = "sdhci/pending-insert",
1217 .version_id = 1,
1218 .minimum_version_id = 1,
1219 .needed = sdhci_pending_insert_vmstate_needed,
1220 .fields = (VMStateField[]) {
1221 VMSTATE_BOOL(pending_insert_state, SDHCIState),
1222 VMSTATE_END_OF_LIST()
1226 const VMStateDescription sdhci_vmstate = {
1227 .name = "sdhci",
1228 .version_id = 1,
1229 .minimum_version_id = 1,
1230 .fields = (VMStateField[]) {
1231 VMSTATE_UINT32(sdmasysad, SDHCIState),
1232 VMSTATE_UINT16(blksize, SDHCIState),
1233 VMSTATE_UINT16(blkcnt, SDHCIState),
1234 VMSTATE_UINT32(argument, SDHCIState),
1235 VMSTATE_UINT16(trnmod, SDHCIState),
1236 VMSTATE_UINT16(cmdreg, SDHCIState),
1237 VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4),
1238 VMSTATE_UINT32(prnsts, SDHCIState),
1239 VMSTATE_UINT8(hostctl, SDHCIState),
1240 VMSTATE_UINT8(pwrcon, SDHCIState),
1241 VMSTATE_UINT8(blkgap, SDHCIState),
1242 VMSTATE_UINT8(wakcon, SDHCIState),
1243 VMSTATE_UINT16(clkcon, SDHCIState),
1244 VMSTATE_UINT8(timeoutcon, SDHCIState),
1245 VMSTATE_UINT8(admaerr, SDHCIState),
1246 VMSTATE_UINT16(norintsts, SDHCIState),
1247 VMSTATE_UINT16(errintsts, SDHCIState),
1248 VMSTATE_UINT16(norintstsen, SDHCIState),
1249 VMSTATE_UINT16(errintstsen, SDHCIState),
1250 VMSTATE_UINT16(norintsigen, SDHCIState),
1251 VMSTATE_UINT16(errintsigen, SDHCIState),
1252 VMSTATE_UINT16(acmd12errsts, SDHCIState),
1253 VMSTATE_UINT16(data_count, SDHCIState),
1254 VMSTATE_UINT64(admasysaddr, SDHCIState),
1255 VMSTATE_UINT8(stopped_state, SDHCIState),
1256 VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, 0, buf_maxsz),
1257 VMSTATE_TIMER_PTR(insert_timer, SDHCIState),
1258 VMSTATE_TIMER_PTR(transfer_timer, SDHCIState),
1259 VMSTATE_END_OF_LIST()
1261 .subsections = (const VMStateDescription*[]) {
1262 &sdhci_pending_insert_vmstate,
1263 NULL
1267 /* Capabilities registers provide information on supported features of this
1268 * specific host controller implementation */
1269 static Property sdhci_pci_properties[] = {
1270 DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
1271 SDHC_CAPAB_REG_DEFAULT),
1272 DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
1273 DEFINE_PROP_END_OF_LIST(),
1276 static void sdhci_pci_realize(PCIDevice *dev, Error **errp)
1278 SDHCIState *s = PCI_SDHCI(dev);
1279 dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */
1280 dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */
1281 sdhci_initfn(s);
1282 s->buf_maxsz = sdhci_get_fifolen(s);
1283 s->fifo_buffer = g_malloc0(s->buf_maxsz);
1284 s->irq = pci_allocate_irq(dev);
1285 memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
1286 SDHC_REGISTERS_MAP_SIZE);
1287 pci_register_bar(dev, 0, 0, &s->iomem);
1290 static void sdhci_pci_exit(PCIDevice *dev)
1292 SDHCIState *s = PCI_SDHCI(dev);
1293 sdhci_uninitfn(s);
1296 static void sdhci_pci_class_init(ObjectClass *klass, void *data)
1298 DeviceClass *dc = DEVICE_CLASS(klass);
1299 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1301 k->realize = sdhci_pci_realize;
1302 k->exit = sdhci_pci_exit;
1303 k->vendor_id = PCI_VENDOR_ID_REDHAT;
1304 k->device_id = PCI_DEVICE_ID_REDHAT_SDHCI;
1305 k->class_id = PCI_CLASS_SYSTEM_SDHCI;
1306 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
1307 dc->vmsd = &sdhci_vmstate;
1308 dc->props = sdhci_pci_properties;
1309 dc->reset = sdhci_poweron_reset;
1312 static const TypeInfo sdhci_pci_info = {
1313 .name = TYPE_PCI_SDHCI,
1314 .parent = TYPE_PCI_DEVICE,
1315 .instance_size = sizeof(SDHCIState),
1316 .class_init = sdhci_pci_class_init,
1319 static Property sdhci_sysbus_properties[] = {
1320 DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
1321 SDHC_CAPAB_REG_DEFAULT),
1322 DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
1323 DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk,
1324 false),
1325 DEFINE_PROP_END_OF_LIST(),
1328 static void sdhci_sysbus_init(Object *obj)
1330 SDHCIState *s = SYSBUS_SDHCI(obj);
1332 sdhci_initfn(s);
1335 static void sdhci_sysbus_finalize(Object *obj)
1337 SDHCIState *s = SYSBUS_SDHCI(obj);
1338 sdhci_uninitfn(s);
1341 static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp)
1343 SDHCIState *s = SYSBUS_SDHCI(dev);
1344 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1346 s->buf_maxsz = sdhci_get_fifolen(s);
1347 s->fifo_buffer = g_malloc0(s->buf_maxsz);
1348 sysbus_init_irq(sbd, &s->irq);
1349 memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci",
1350 SDHC_REGISTERS_MAP_SIZE);
1351 sysbus_init_mmio(sbd, &s->iomem);
1354 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data)
1356 DeviceClass *dc = DEVICE_CLASS(klass);
1358 dc->vmsd = &sdhci_vmstate;
1359 dc->props = sdhci_sysbus_properties;
1360 dc->realize = sdhci_sysbus_realize;
1361 dc->reset = sdhci_poweron_reset;
1364 static const TypeInfo sdhci_sysbus_info = {
1365 .name = TYPE_SYSBUS_SDHCI,
1366 .parent = TYPE_SYS_BUS_DEVICE,
1367 .instance_size = sizeof(SDHCIState),
1368 .instance_init = sdhci_sysbus_init,
1369 .instance_finalize = sdhci_sysbus_finalize,
1370 .class_init = sdhci_sysbus_class_init,
1373 static void sdhci_bus_class_init(ObjectClass *klass, void *data)
1375 SDBusClass *sbc = SD_BUS_CLASS(klass);
1377 sbc->set_inserted = sdhci_set_inserted;
1378 sbc->set_readonly = sdhci_set_readonly;
1381 static const TypeInfo sdhci_bus_info = {
1382 .name = TYPE_SDHCI_BUS,
1383 .parent = TYPE_SD_BUS,
1384 .instance_size = sizeof(SDBus),
1385 .class_init = sdhci_bus_class_init,
1388 static void sdhci_register_types(void)
1390 type_register_static(&sdhci_pci_info);
1391 type_register_static(&sdhci_sysbus_info);
1392 type_register_static(&sdhci_bus_info);
1395 type_init(sdhci_register_types)