ram: Use the RAMState bytes_transferred parameter
[qemu/ar7.git] / hw / i2c / exynos4210_i2c.c
blobc96fa7d7be4382a081c73c8cd0c3fd25c9ffc15c
1 /*
2 * Exynos4210 I2C Bus Serial Interface Emulation
4 * Copyright (C) 2012 Samsung Electronics Co Ltd.
5 * Maksim Kozlov, <m.kozlov@samsung.com>
6 * Igor Mitsyanko, <i.mitsyanko@samsung.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 * for more details.
18 * You should have received a copy of the GNU General Public License along
19 * with this program; if not, see <http://www.gnu.org/licenses/>.
23 #include "qemu/osdep.h"
24 #include "qemu/timer.h"
25 #include "hw/sysbus.h"
26 #include "hw/i2c/i2c.h"
28 #ifndef EXYNOS4_I2C_DEBUG
29 #define EXYNOS4_I2C_DEBUG 0
30 #endif
32 #define TYPE_EXYNOS4_I2C "exynos4210.i2c"
33 #define EXYNOS4_I2C(obj) \
34 OBJECT_CHECK(Exynos4210I2CState, (obj), TYPE_EXYNOS4_I2C)
36 /* Exynos4210 I2C memory map */
37 #define EXYNOS4_I2C_MEM_SIZE 0x14
38 #define I2CCON_ADDR 0x00 /* control register */
39 #define I2CSTAT_ADDR 0x04 /* control/status register */
40 #define I2CADD_ADDR 0x08 /* address register */
41 #define I2CDS_ADDR 0x0c /* data shift register */
42 #define I2CLC_ADDR 0x10 /* line control register */
44 #define I2CCON_ACK_GEN (1 << 7)
45 #define I2CCON_INTRS_EN (1 << 5)
46 #define I2CCON_INT_PEND (1 << 4)
48 #define EXYNOS4_I2C_MODE(reg) (((reg) >> 6) & 3)
49 #define I2C_IN_MASTER_MODE(reg) (((reg) >> 6) & 2)
50 #define I2CMODE_MASTER_Rx 0x2
51 #define I2CMODE_MASTER_Tx 0x3
52 #define I2CSTAT_LAST_BIT (1 << 0)
53 #define I2CSTAT_OUTPUT_EN (1 << 4)
54 #define I2CSTAT_START_BUSY (1 << 5)
57 #if EXYNOS4_I2C_DEBUG
58 #define DPRINT(fmt, args...) \
59 do { fprintf(stderr, "QEMU I2C: "fmt, ## args); } while (0)
61 static const char *exynos4_i2c_get_regname(unsigned offset)
63 switch (offset) {
64 case I2CCON_ADDR:
65 return "I2CCON";
66 case I2CSTAT_ADDR:
67 return "I2CSTAT";
68 case I2CADD_ADDR:
69 return "I2CADD";
70 case I2CDS_ADDR:
71 return "I2CDS";
72 case I2CLC_ADDR:
73 return "I2CLC";
74 default:
75 return "[?]";
79 #else
80 #define DPRINT(fmt, args...) do { } while (0)
81 #endif
83 typedef struct Exynos4210I2CState {
84 SysBusDevice parent_obj;
86 MemoryRegion iomem;
87 I2CBus *bus;
88 qemu_irq irq;
90 uint8_t i2ccon;
91 uint8_t i2cstat;
92 uint8_t i2cadd;
93 uint8_t i2cds;
94 uint8_t i2clc;
95 bool scl_free;
96 } Exynos4210I2CState;
98 static inline void exynos4210_i2c_raise_interrupt(Exynos4210I2CState *s)
100 if (s->i2ccon & I2CCON_INTRS_EN) {
101 s->i2ccon |= I2CCON_INT_PEND;
102 qemu_irq_raise(s->irq);
106 static void exynos4210_i2c_data_receive(void *opaque)
108 Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
109 int ret;
111 s->i2cstat &= ~I2CSTAT_LAST_BIT;
112 s->scl_free = false;
113 ret = i2c_recv(s->bus);
114 if (ret < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
115 s->i2cstat |= I2CSTAT_LAST_BIT; /* Data is not acknowledged */
116 } else {
117 s->i2cds = ret;
119 exynos4210_i2c_raise_interrupt(s);
122 static void exynos4210_i2c_data_send(void *opaque)
124 Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
126 s->i2cstat &= ~I2CSTAT_LAST_BIT;
127 s->scl_free = false;
128 if (i2c_send(s->bus, s->i2cds) < 0 && (s->i2ccon & I2CCON_ACK_GEN)) {
129 s->i2cstat |= I2CSTAT_LAST_BIT;
131 exynos4210_i2c_raise_interrupt(s);
134 static uint64_t exynos4210_i2c_read(void *opaque, hwaddr offset,
135 unsigned size)
137 Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
138 uint8_t value;
140 switch (offset) {
141 case I2CCON_ADDR:
142 value = s->i2ccon;
143 break;
144 case I2CSTAT_ADDR:
145 value = s->i2cstat;
146 break;
147 case I2CADD_ADDR:
148 value = s->i2cadd;
149 break;
150 case I2CDS_ADDR:
151 value = s->i2cds;
152 s->scl_free = true;
153 if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx &&
154 (s->i2cstat & I2CSTAT_START_BUSY) &&
155 !(s->i2ccon & I2CCON_INT_PEND)) {
156 exynos4210_i2c_data_receive(s);
158 break;
159 case I2CLC_ADDR:
160 value = s->i2clc;
161 break;
162 default:
163 value = 0;
164 DPRINT("ERROR: Bad read offset 0x%x\n", (unsigned int)offset);
165 break;
168 DPRINT("read %s [0x%02x] -> 0x%02x\n", exynos4_i2c_get_regname(offset),
169 (unsigned int)offset, value);
170 return value;
173 static void exynos4210_i2c_write(void *opaque, hwaddr offset,
174 uint64_t value, unsigned size)
176 Exynos4210I2CState *s = (Exynos4210I2CState *)opaque;
177 uint8_t v = value & 0xff;
179 DPRINT("write %s [0x%02x] <- 0x%02x\n", exynos4_i2c_get_regname(offset),
180 (unsigned int)offset, v);
182 switch (offset) {
183 case I2CCON_ADDR:
184 s->i2ccon = (v & ~I2CCON_INT_PEND) | (s->i2ccon & I2CCON_INT_PEND);
185 if ((s->i2ccon & I2CCON_INT_PEND) && !(v & I2CCON_INT_PEND)) {
186 s->i2ccon &= ~I2CCON_INT_PEND;
187 qemu_irq_lower(s->irq);
188 if (!(s->i2ccon & I2CCON_INTRS_EN)) {
189 s->i2cstat &= ~I2CSTAT_START_BUSY;
192 if (s->i2cstat & I2CSTAT_START_BUSY) {
193 if (s->scl_free) {
194 if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx) {
195 exynos4210_i2c_data_send(s);
196 } else if (EXYNOS4_I2C_MODE(s->i2cstat) ==
197 I2CMODE_MASTER_Rx) {
198 exynos4210_i2c_data_receive(s);
200 } else {
201 s->i2ccon |= I2CCON_INT_PEND;
202 qemu_irq_raise(s->irq);
206 break;
207 case I2CSTAT_ADDR:
208 s->i2cstat =
209 (s->i2cstat & I2CSTAT_START_BUSY) | (v & ~I2CSTAT_START_BUSY);
211 if (!(s->i2cstat & I2CSTAT_OUTPUT_EN)) {
212 s->i2cstat &= ~I2CSTAT_START_BUSY;
213 s->scl_free = true;
214 qemu_irq_lower(s->irq);
215 break;
218 /* Nothing to do if in i2c slave mode */
219 if (!I2C_IN_MASTER_MODE(s->i2cstat)) {
220 break;
223 if (v & I2CSTAT_START_BUSY) {
224 s->i2cstat &= ~I2CSTAT_LAST_BIT;
225 s->i2cstat |= I2CSTAT_START_BUSY; /* Line is busy */
226 s->scl_free = false;
228 /* Generate start bit and send slave address */
229 if (i2c_start_transfer(s->bus, s->i2cds >> 1, s->i2cds & 0x1) &&
230 (s->i2ccon & I2CCON_ACK_GEN)) {
231 s->i2cstat |= I2CSTAT_LAST_BIT;
232 } else if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Rx) {
233 exynos4210_i2c_data_receive(s);
235 exynos4210_i2c_raise_interrupt(s);
236 } else {
237 i2c_end_transfer(s->bus);
238 if (!(s->i2ccon & I2CCON_INT_PEND)) {
239 s->i2cstat &= ~I2CSTAT_START_BUSY;
241 s->scl_free = true;
243 break;
244 case I2CADD_ADDR:
245 if ((s->i2cstat & I2CSTAT_OUTPUT_EN) == 0) {
246 s->i2cadd = v;
248 break;
249 case I2CDS_ADDR:
250 if (s->i2cstat & I2CSTAT_OUTPUT_EN) {
251 s->i2cds = v;
252 s->scl_free = true;
253 if (EXYNOS4_I2C_MODE(s->i2cstat) == I2CMODE_MASTER_Tx &&
254 (s->i2cstat & I2CSTAT_START_BUSY) &&
255 !(s->i2ccon & I2CCON_INT_PEND)) {
256 exynos4210_i2c_data_send(s);
259 break;
260 case I2CLC_ADDR:
261 s->i2clc = v;
262 break;
263 default:
264 DPRINT("ERROR: Bad write offset 0x%x\n", (unsigned int)offset);
265 break;
269 static const MemoryRegionOps exynos4210_i2c_ops = {
270 .read = exynos4210_i2c_read,
271 .write = exynos4210_i2c_write,
272 .endianness = DEVICE_NATIVE_ENDIAN,
275 static const VMStateDescription exynos4210_i2c_vmstate = {
276 .name = "exynos4210.i2c",
277 .version_id = 1,
278 .minimum_version_id = 1,
279 .fields = (VMStateField[]) {
280 VMSTATE_UINT8(i2ccon, Exynos4210I2CState),
281 VMSTATE_UINT8(i2cstat, Exynos4210I2CState),
282 VMSTATE_UINT8(i2cds, Exynos4210I2CState),
283 VMSTATE_UINT8(i2cadd, Exynos4210I2CState),
284 VMSTATE_UINT8(i2clc, Exynos4210I2CState),
285 VMSTATE_BOOL(scl_free, Exynos4210I2CState),
286 VMSTATE_END_OF_LIST()
290 static void exynos4210_i2c_reset(DeviceState *d)
292 Exynos4210I2CState *s = EXYNOS4_I2C(d);
294 s->i2ccon = 0x00;
295 s->i2cstat = 0x00;
296 s->i2cds = 0xFF;
297 s->i2clc = 0x00;
298 s->i2cadd = 0xFF;
299 s->scl_free = true;
302 static void exynos4210_i2c_init(Object *obj)
304 DeviceState *dev = DEVICE(obj);
305 Exynos4210I2CState *s = EXYNOS4_I2C(obj);
306 SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
308 memory_region_init_io(&s->iomem, obj, &exynos4210_i2c_ops, s,
309 TYPE_EXYNOS4_I2C, EXYNOS4_I2C_MEM_SIZE);
310 sysbus_init_mmio(sbd, &s->iomem);
311 sysbus_init_irq(sbd, &s->irq);
312 s->bus = i2c_init_bus(dev, "i2c");
315 static void exynos4210_i2c_class_init(ObjectClass *klass, void *data)
317 DeviceClass *dc = DEVICE_CLASS(klass);
319 dc->vmsd = &exynos4210_i2c_vmstate;
320 dc->reset = exynos4210_i2c_reset;
323 static const TypeInfo exynos4210_i2c_type_info = {
324 .name = TYPE_EXYNOS4_I2C,
325 .parent = TYPE_SYS_BUS_DEVICE,
326 .instance_size = sizeof(Exynos4210I2CState),
327 .instance_init = exynos4210_i2c_init,
328 .class_init = exynos4210_i2c_class_init,
331 static void exynos4210_i2c_register_types(void)
333 type_register_static(&exynos4210_i2c_type_info);
336 type_init(exynos4210_i2c_register_types)