hw/usb-hub.c

   1 /*
   2  * QEMU USB HUB emulation
   3  *
   4  * Copyright (c) 2005 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #include "qemu-common.h"
  25 #include "usb.h"
  26 #include "usb-desc.h"
  27
  28 //#define DEBUG
  29
  30 #define NUM_PORTS 8
  31
  32 typedef struct USBHubPort {
  33     USBPort port;
  34     uint16_t wPortStatus;
  35     uint16_t wPortChange;
  36 } USBHubPort;
  37
  38 typedef struct USBHubState {
  39     USBDevice dev;
  40     USBHubPort ports[NUM_PORTS];
  41 } USBHubState;
  42
  43 #define ClearHubFeature         (0x2000 | USB_REQ_CLEAR_FEATURE)
  44 #define ClearPortFeature        (0x2300 | USB_REQ_CLEAR_FEATURE)
  45 #define GetHubDescriptor        (0xa000 | USB_REQ_GET_DESCRIPTOR)
  46 #define GetHubStatus            (0xa000 | USB_REQ_GET_STATUS)
  47 #define GetPortStatus           (0xa300 | USB_REQ_GET_STATUS)
  48 #define SetHubFeature           (0x2000 | USB_REQ_SET_FEATURE)
  49 #define SetPortFeature          (0x2300 | USB_REQ_SET_FEATURE)
  50
  51 #define PORT_STAT_CONNECTION    0x0001
  52 #define PORT_STAT_ENABLE        0x0002
  53 #define PORT_STAT_SUSPEND       0x0004
  54 #define PORT_STAT_OVERCURRENT   0x0008
  55 #define PORT_STAT_RESET         0x0010
  56 #define PORT_STAT_POWER         0x0100
  57 #define PORT_STAT_LOW_SPEED     0x0200
  58 #define PORT_STAT_HIGH_SPEED    0x0400
  59 #define PORT_STAT_TEST          0x0800
  60 #define PORT_STAT_INDICATOR     0x1000
  61
  62 #define PORT_STAT_C_CONNECTION  0x0001
  63 #define PORT_STAT_C_ENABLE      0x0002
  64 #define PORT_STAT_C_SUSPEND     0x0004
  65 #define PORT_STAT_C_OVERCURRENT 0x0008
  66 #define PORT_STAT_C_RESET       0x0010
  67
  68 #define PORT_CONNECTION         0
  69 #define PORT_ENABLE             1
  70 #define PORT_SUSPEND            2
  71 #define PORT_OVERCURRENT        3
  72 #define PORT_RESET              4
  73 #define PORT_POWER              8
  74 #define PORT_LOWSPEED           9
  75 #define PORT_HIGHSPEED          10
  76 #define PORT_C_CONNECTION       16
  77 #define PORT_C_ENABLE           17
  78 #define PORT_C_SUSPEND          18
  79 #define PORT_C_OVERCURRENT      19
  80 #define PORT_C_RESET            20
  81 #define PORT_TEST               21
  82 #define PORT_INDICATOR          22
  83
  84 /* same as Linux kernel root hubs */
  85
  86 enum {
  87     STR_MANUFACTURER = 1,
  88     STR_PRODUCT,
  89     STR_SERIALNUMBER,
  90 };
  91
  92 static const USBDescStrings desc_strings = {
  93     [STR_MANUFACTURER] = "QEMU " QEMU_VERSION,
  94     [STR_PRODUCT]      = "QEMU USB Hub",
  95     [STR_SERIALNUMBER] = "314159",
  96 };
  97
  98 static const USBDescIface desc_iface_hub = {
  99     .bInterfaceNumber              = 0,
 100     .bNumEndpoints                 = 1,
 101     .bInterfaceClass               = USB_CLASS_HUB,
 102     .eps = (USBDescEndpoint[]) {
 103         {
 104             .bEndpointAddress      = USB_DIR_IN | 0x01,
 105             .bmAttributes          = USB_ENDPOINT_XFER_INT,
 106             .wMaxPacketSize        = 1 + (NUM_PORTS + 7) / 8,
 107             .bInterval             = 0xff,
 108         },
 109     }
 110 };
 111
 112 static const USBDescDevice desc_device_hub = {
 113     .bcdUSB                        = 0x0110,
 114     .bDeviceClass                  = USB_CLASS_HUB,
 115     .bMaxPacketSize0               = 8,
 116     .bNumConfigurations            = 1,
 117     .confs = (USBDescConfig[]) {
 118         {
 119             .bNumInterfaces        = 1,
 120             .bConfigurationValue   = 1,
 121             .bmAttributes          = 0xe0,
 122             .ifs = &desc_iface_hub,
 123         },
 124     },
 125 };
 126
 127 static const USBDesc desc_hub = {
 128     .id = {
 129         .idVendor          = 0,
 130         .idProduct         = 0,
 131         .bcdDevice         = 0x0101,
 132         .iManufacturer     = STR_MANUFACTURER,
 133         .iProduct          = STR_PRODUCT,
 134         .iSerialNumber     = STR_SERIALNUMBER,
 135     },
 136     .full = &desc_device_hub,
 137     .str  = desc_strings,
 138 };
 139
 140 static const uint8_t qemu_hub_dev_descriptor[] = {
 141         0x12,       /*  u8 bLength; */
 142         0x01,       /*  u8 bDescriptorType; Device */
 143         0x10, 0x01, /*  u16 bcdUSB; v1.1 */
 144
 145         0x09,       /*  u8  bDeviceClass; HUB_CLASSCODE */
 146         0x00,       /*  u8  bDeviceSubClass; */
 147         0x00,       /*  u8  bDeviceProtocol; [ low/full speeds only ] */
 148         0x08,       /*  u8  bMaxPacketSize0; 8 Bytes */
 149
 150         0x00, 0x00, /*  u16 idVendor; */
 151         0x00, 0x00, /*  u16 idProduct; */
 152         0x01, 0x01, /*  u16 bcdDevice */
 153
 154         0x03,       /*  u8  iManufacturer; */
 155         0x02,       /*  u8  iProduct; */
 156         0x01,       /*  u8  iSerialNumber; */
 157         0x01        /*  u8  bNumConfigurations; */
 158 };
 159
 160 /* XXX: patch interrupt size */
 161 static const uint8_t qemu_hub_config_descriptor[] = {
 162
 163         /* one configuration */
 164         0x09,       /*  u8  bLength; */
 165         0x02,       /*  u8  bDescriptorType; Configuration */
 166         0x19, 0x00, /*  u16 wTotalLength; */
 167         0x01,       /*  u8  bNumInterfaces; (1) */
 168         0x01,       /*  u8  bConfigurationValue; */
 169         0x00,       /*  u8  iConfiguration; */
 170         0xe0,       /*  u8  bmAttributes;
 171                                  Bit 7: must be set,
 172                                      6: Self-powered,
 173                                      5: Remote wakeup,
 174                                      4..0: resvd */
 175         0x00,       /*  u8  MaxPower; */
 176
 177         /* USB 1.1:
 178          * USB 2.0, single TT organization (mandatory):
 179          *      one interface, protocol 0
 180          *
 181          * USB 2.0, multiple TT organization (optional):
 182          *      two interfaces, protocols 1 (like single TT)
 183          *      and 2 (multiple TT mode) ... config is
 184          *      sometimes settable
 185          *      NOT IMPLEMENTED
 186          */
 187
 188         /* one interface */
 189         0x09,       /*  u8  if_bLength; */
 190         0x04,       /*  u8  if_bDescriptorType; Interface */
 191         0x00,       /*  u8  if_bInterfaceNumber; */
 192         0x00,       /*  u8  if_bAlternateSetting; */
 193         0x01,       /*  u8  if_bNumEndpoints; */
 194         0x09,       /*  u8  if_bInterfaceClass; HUB_CLASSCODE */
 195         0x00,       /*  u8  if_bInterfaceSubClass; */
 196         0x00,       /*  u8  if_bInterfaceProtocol; [usb1.1 or single tt] */
 197         0x00,       /*  u8  if_iInterface; */
 198
 199         /* one endpoint (status change endpoint) */
 200         0x07,       /*  u8  ep_bLength; */
 201         0x05,       /*  u8  ep_bDescriptorType; Endpoint */
 202         0x81,       /*  u8  ep_bEndpointAddress; IN Endpoint 1 */
 203         0x03,       /*  u8  ep_bmAttributes; Interrupt */
 204         0x02, 0x00, /*  u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
 205         0xff        /*  u8  ep_bInterval; (255ms -- usb 2.0 spec) */
 206 };
 207
 208 static const uint8_t qemu_hub_hub_descriptor[] =
 209 {
 210         0x00,                   /*  u8  bLength; patched in later */
 211         0x29,                   /*  u8  bDescriptorType; Hub-descriptor */
 212         0x00,                   /*  u8  bNbrPorts; (patched later) */
 213         0x0a,                   /* u16  wHubCharacteristics; */
 214         0x00,                   /*   (per-port OC, no power switching) */
 215         0x01,                   /*  u8  bPwrOn2pwrGood; 2ms */
 216         0x00                    /*  u8  bHubContrCurrent; 0 mA */
 217
 218         /* DeviceRemovable and PortPwrCtrlMask patched in later */
 219 };
 220
 221 static void usb_hub_attach(USBPort *port1, USBDevice *dev)
 222 {
 223     USBHubState *s = port1->opaque;
 224     USBHubPort *port = &s->ports[port1->index];
 225
 226     if (dev) {
 227         if (port->port.dev)
 228             usb_attach(port1, NULL);
 229
 230         port->wPortStatus |= PORT_STAT_CONNECTION;
 231         port->wPortChange |= PORT_STAT_C_CONNECTION;
 232         if (dev->speed == USB_SPEED_LOW)
 233             port->wPortStatus |= PORT_STAT_LOW_SPEED;
 234         else
 235             port->wPortStatus &= ~PORT_STAT_LOW_SPEED;
 236         port->port.dev = dev;
 237         /* send the attach message */
 238         usb_send_msg(dev, USB_MSG_ATTACH);
 239     } else {
 240         dev = port->port.dev;
 241         if (dev) {
 242             port->wPortStatus &= ~PORT_STAT_CONNECTION;
 243             port->wPortChange |= PORT_STAT_C_CONNECTION;
 244             if (port->wPortStatus & PORT_STAT_ENABLE) {
 245                 port->wPortStatus &= ~PORT_STAT_ENABLE;
 246                 port->wPortChange |= PORT_STAT_C_ENABLE;
 247             }
 248             /* send the detach message */
 249             usb_send_msg(dev, USB_MSG_DETACH);
 250             port->port.dev = NULL;
 251         }
 252     }
 253 }
 254
 255 static void usb_hub_handle_reset(USBDevice *dev)
 256 {
 257     /* XXX: do it */
 258 }
 259
 260 static int usb_hub_handle_control(USBDevice *dev, int request, int value,
 261                                   int index, int length, uint8_t *data)
 262 {
 263     USBHubState *s = (USBHubState *)dev;
 264     int ret;
 265
 266     ret = usb_desc_handle_control(dev, request, value, index, length, data);
 267     if (ret >= 0) {
 268         return ret;
 269     }
 270
 271     switch(request) {
 272     case DeviceRequest | USB_REQ_GET_STATUS:
 273         data[0] = (1 << USB_DEVICE_SELF_POWERED) |
 274             (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
 275         data[1] = 0x00;
 276         ret = 2;
 277         break;
 278     case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
 279         if (value == USB_DEVICE_REMOTE_WAKEUP) {
 280             dev->remote_wakeup = 0;
 281         } else {
 282             goto fail;
 283         }
 284         ret = 0;
 285         break;
 286     case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
 287         if (value == 0 && index != 0x81) { /* clear ep halt */
 288             goto fail;
 289         }
 290         ret = 0;
 291         break;
 292     case DeviceOutRequest | USB_REQ_SET_FEATURE:
 293         if (value == USB_DEVICE_REMOTE_WAKEUP) {
 294             dev->remote_wakeup = 1;
 295         } else {
 296             goto fail;
 297         }
 298         ret = 0;
 299         break;
 300     case DeviceOutRequest | USB_REQ_SET_ADDRESS:
 301         dev->addr = value;
 302         ret = 0;
 303         break;
 304     case DeviceRequest | USB_REQ_GET_CONFIGURATION:
 305         data[0] = 1;
 306         ret = 1;
 307         break;
 308     case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
 309         ret = 0;
 310         break;
 311     case DeviceRequest | USB_REQ_GET_INTERFACE:
 312         data[0] = 0;
 313         ret = 1;
 314         break;
 315     case DeviceOutRequest | USB_REQ_SET_INTERFACE:
 316         ret = 0;
 317         break;
 318         /* usb specific requests */
 319     case GetHubStatus:
 320         data[0] = 0;
 321         data[1] = 0;
 322         data[2] = 0;
 323         data[3] = 0;
 324         ret = 4;
 325         break;
 326     case GetPortStatus:
 327         {
 328             unsigned int n = index - 1;
 329             USBHubPort *port;
 330             if (n >= NUM_PORTS) {
 331                 goto fail;
 332             }
 333             port = &s->ports[n];
 334             data[0] = port->wPortStatus;
 335             data[1] = port->wPortStatus >> 8;
 336             data[2] = port->wPortChange;
 337             data[3] = port->wPortChange >> 8;
 338             ret = 4;
 339         }
 340         break;
 341     case SetHubFeature:
 342     case ClearHubFeature:
 343         if (value == 0 || value == 1) {
 344         } else {
 345             goto fail;
 346         }
 347         ret = 0;
 348         break;
 349     case SetPortFeature:
 350         {
 351             unsigned int n = index - 1;
 352             USBHubPort *port;
 353             USBDevice *dev;
 354             if (n >= NUM_PORTS) {
 355                 goto fail;
 356             }
 357             port = &s->ports[n];
 358             dev = port->port.dev;
 359             switch(value) {
 360             case PORT_SUSPEND:
 361                 port->wPortStatus |= PORT_STAT_SUSPEND;
 362                 break;
 363             case PORT_RESET:
 364                 if (dev) {
 365                     usb_send_msg(dev, USB_MSG_RESET);
 366                     port->wPortChange |= PORT_STAT_C_RESET;
 367                     /* set enable bit */
 368                     port->wPortStatus |= PORT_STAT_ENABLE;
 369                 }
 370                 break;
 371             case PORT_POWER:
 372                 break;
 373             default:
 374                 goto fail;
 375             }
 376             ret = 0;
 377         }
 378         break;
 379     case ClearPortFeature:
 380         {
 381             unsigned int n = index - 1;
 382             USBHubPort *port;
 383
 384             if (n >= NUM_PORTS) {
 385                 goto fail;
 386             }
 387             port = &s->ports[n];
 388             switch(value) {
 389             case PORT_ENABLE:
 390                 port->wPortStatus &= ~PORT_STAT_ENABLE;
 391                 break;
 392             case PORT_C_ENABLE:
 393                 port->wPortChange &= ~PORT_STAT_C_ENABLE;
 394                 break;
 395             case PORT_SUSPEND:
 396                 port->wPortStatus &= ~PORT_STAT_SUSPEND;
 397                 break;
 398             case PORT_C_SUSPEND:
 399                 port->wPortChange &= ~PORT_STAT_C_SUSPEND;
 400                 break;
 401             case PORT_C_CONNECTION:
 402                 port->wPortChange &= ~PORT_STAT_C_CONNECTION;
 403                 break;
 404             case PORT_C_OVERCURRENT:
 405                 port->wPortChange &= ~PORT_STAT_C_OVERCURRENT;
 406                 break;
 407             case PORT_C_RESET:
 408                 port->wPortChange &= ~PORT_STAT_C_RESET;
 409                 break;
 410             default:
 411                 goto fail;
 412             }
 413             ret = 0;
 414         }
 415         break;
 416     case GetHubDescriptor:
 417         {
 418             unsigned int n, limit, var_hub_size = 0;
 419             memcpy(data, qemu_hub_hub_descriptor,
 420                    sizeof(qemu_hub_hub_descriptor));
 421             data[2] = NUM_PORTS;
 422
 423             /* fill DeviceRemovable bits */
 424             limit = ((NUM_PORTS + 1 + 7) / 8) + 7;
 425             for (n = 7; n < limit; n++) {
 426                 data[n] = 0x00;
 427                 var_hub_size++;
 428             }
 429
 430             /* fill PortPwrCtrlMask bits */
 431             limit = limit + ((NUM_PORTS + 7) / 8);
 432             for (;n < limit; n++) {
 433                 data[n] = 0xff;
 434                 var_hub_size++;
 435             }
 436
 437             ret = sizeof(qemu_hub_hub_descriptor) + var_hub_size;
 438             data[0] = ret;
 439             break;
 440         }
 441     default:
 442     fail:
 443         ret = USB_RET_STALL;
 444         break;
 445     }
 446     return ret;
 447 }
 448
 449 static int usb_hub_handle_data(USBDevice *dev, USBPacket *p)
 450 {
 451     USBHubState *s = (USBHubState *)dev;
 452     int ret;
 453
 454     switch(p->pid) {
 455     case USB_TOKEN_IN:
 456         if (p->devep == 1) {
 457             USBHubPort *port;
 458             unsigned int status;
 459             int i, n;
 460             n = (NUM_PORTS + 1 + 7) / 8;
 461             if (p->len == 1) { /* FreeBSD workaround */
 462                 n = 1;
 463             } else if (n > p->len) {
 464                 return USB_RET_BABBLE;
 465             }
 466             status = 0;
 467             for(i = 0; i < NUM_PORTS; i++) {
 468                 port = &s->ports[i];
 469                 if (port->wPortChange)
 470                     status |= (1 << (i + 1));
 471             }
 472             if (status != 0) {
 473                 for(i = 0; i < n; i++) {
 474                     p->data[i] = status >> (8 * i);
 475                 }
 476                 ret = n;
 477             } else {
 478                 ret = USB_RET_NAK; /* usb11 11.13.1 */
 479             }
 480         } else {
 481             goto fail;
 482         }
 483         break;
 484     case USB_TOKEN_OUT:
 485     default:
 486     fail:
 487         ret = USB_RET_STALL;
 488         break;
 489     }
 490     return ret;
 491 }
 492
 493 static int usb_hub_broadcast_packet(USBHubState *s, USBPacket *p)
 494 {
 495     USBHubPort *port;
 496     USBDevice *dev;
 497     int i, ret;
 498
 499     for(i = 0; i < NUM_PORTS; i++) {
 500         port = &s->ports[i];
 501         dev = port->port.dev;
 502         if (dev && (port->wPortStatus & PORT_STAT_ENABLE)) {
 503             ret = dev->info->handle_packet(dev, p);
 504             if (ret != USB_RET_NODEV) {
 505                 return ret;
 506             }
 507         }
 508     }
 509     return USB_RET_NODEV;
 510 }
 511
 512 static int usb_hub_handle_packet(USBDevice *dev, USBPacket *p)
 513 {
 514     USBHubState *s = (USBHubState *)dev;
 515
 516 #if defined(DEBUG) && 0
 517     printf("usb_hub: pid=0x%x\n", pid);
 518 #endif
 519     if (dev->state == USB_STATE_DEFAULT &&
 520         dev->addr != 0 &&
 521         p->devaddr != dev->addr &&
 522         (p->pid == USB_TOKEN_SETUP ||
 523          p->pid == USB_TOKEN_OUT ||
 524          p->pid == USB_TOKEN_IN)) {
 525         /* broadcast the packet to the devices */
 526         return usb_hub_broadcast_packet(s, p);
 527     }
 528     return usb_generic_handle_packet(dev, p);
 529 }
 530
 531 static void usb_hub_handle_destroy(USBDevice *dev)
 532 {
 533     USBHubState *s = (USBHubState *)dev;
 534     int i;
 535
 536     for (i = 0; i < NUM_PORTS; i++) {
 537         usb_unregister_port(usb_bus_from_device(dev),
 538                             &s->ports[i].port);
 539     }
 540 }
 541
 542 static int usb_hub_initfn(USBDevice *dev)
 543 {
 544     USBHubState *s = DO_UPCAST(USBHubState, dev, dev);
 545     USBHubPort *port;
 546     int i;
 547
 548     s->dev.speed = USB_SPEED_FULL;
 549     for (i = 0; i < NUM_PORTS; i++) {
 550         port = &s->ports[i];
 551         usb_register_port(usb_bus_from_device(dev),
 552                           &port->port, s, i, &s->dev, usb_hub_attach);
 553         port->wPortStatus = PORT_STAT_POWER;
 554         port->wPortChange = 0;
 555     }
 556     return 0;
 557 }
 558
 559 static struct USBDeviceInfo hub_info = {
 560     .product_desc   = "QEMU USB Hub",
 561     .qdev.name      = "usb-hub",
 562     .qdev.fw_name    = "hub",
 563     .qdev.size      = sizeof(USBHubState),
 564     .usb_desc       = &desc_hub,
 565     .init           = usb_hub_initfn,
 566     .handle_packet  = usb_hub_handle_packet,
 567     .handle_reset   = usb_hub_handle_reset,
 568     .handle_control = usb_hub_handle_control,
 569     .handle_data    = usb_hub_handle_data,
 570     .handle_destroy = usb_hub_handle_destroy,
 571 };
 572
 573 static void usb_hub_register_devices(void)
 574 {
 575     usb_qdev_register(&hub_info);
 576 }
 577 device_init(usb_hub_register_devices)