hw/omap_intc.c

   1 /*
   2  * TI OMAP interrupt controller emulation.
   3  *
   4  * Copyright (C) 2006-2008 Andrzej Zaborowski  <balrog@zabor.org>
   5  * Copyright (C) 2007-2008 Nokia Corporation
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20 #include "hw.h"
  21 #include "omap.h"
  22
  23 /* Interrupt Handlers */
  24 struct omap_intr_handler_bank_s {
  25     uint32_t irqs;
  26     uint32_t inputs;
  27     uint32_t mask;
  28     uint32_t fiq;
  29     uint32_t sens_edge;
  30     uint32_t swi;
  31     unsigned char priority[32];
  32 };
  33
  34 struct omap_intr_handler_s {
  35     qemu_irq *pins;
  36     qemu_irq parent_intr[2];
  37     unsigned char nbanks;
  38     int level_only;
  39
  40     /* state */
  41     uint32_t new_agr[2];
  42     int sir_intr[2];
  43     int autoidle;
  44     uint32_t mask;
  45     struct omap_intr_handler_bank_s bank[];
  46 };
  47
  48 inline qemu_irq omap_inth_get_pin(struct omap_intr_handler_s *s, int n)
  49 {
  50     return s->pins[n];
  51 }
  52
  53 static void omap_inth_sir_update(struct omap_intr_handler_s *s, int is_fiq)
  54 {
  55     int i, j, sir_intr, p_intr, p, f;
  56     uint32_t level;
  57     sir_intr = 0;
  58     p_intr = 255;
  59
  60     /* Find the interrupt line with the highest dynamic priority.
  61      * Note: 0 denotes the hightest priority.
  62      * If all interrupts have the same priority, the default order is IRQ_N,
  63      * IRQ_N-1,...,IRQ_0. */
  64     for (j = 0; j < s->nbanks; ++j) {
  65         level = s->bank[j].irqs & ~s->bank[j].mask &
  66                 (is_fiq ? s->bank[j].fiq : ~s->bank[j].fiq);
  67         for (f = ffs(level), i = f - 1, level >>= f - 1; f; i += f,
  68                         level >>= f) {
  69             p = s->bank[j].priority[i];
  70             if (p <= p_intr) {
  71                 p_intr = p;
  72                 sir_intr = 32 * j + i;
  73             }
  74             f = ffs(level >> 1);
  75         }
  76     }
  77     s->sir_intr[is_fiq] = sir_intr;
  78 }
  79
  80 static inline void omap_inth_update(struct omap_intr_handler_s *s, int is_fiq)
  81 {
  82     int i;
  83     uint32_t has_intr = 0;
  84
  85     for (i = 0; i < s->nbanks; ++i)
  86         has_intr |= s->bank[i].irqs & ~s->bank[i].mask &
  87                 (is_fiq ? s->bank[i].fiq : ~s->bank[i].fiq);
  88
  89     if (s->new_agr[is_fiq] & has_intr & s->mask) {
  90         s->new_agr[is_fiq] = 0;
  91         omap_inth_sir_update(s, is_fiq);
  92         qemu_set_irq(s->parent_intr[is_fiq], 1);
  93     }
  94 }
  95
  96 #define INT_FALLING_EDGE        0
  97 #define INT_LOW_LEVEL           1
  98
  99 static void omap_set_intr(void *opaque, int irq, int req)
 100 {
 101     struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque;
 102     uint32_t rise;
 103
 104     struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5];
 105     int n = irq & 31;
 106
 107     if (req) {
 108         rise = ~bank->irqs & (1 << n);
 109         if (~bank->sens_edge & (1 << n))
 110             rise &= ~bank->inputs;
 111
 112         bank->inputs |= (1 << n);
 113         if (rise) {
 114             bank->irqs |= rise;
 115             omap_inth_update(ih, 0);
 116             omap_inth_update(ih, 1);
 117         }
 118     } else {
 119         rise = bank->sens_edge & bank->irqs & (1 << n);
 120         bank->irqs &= ~rise;
 121         bank->inputs &= ~(1 << n);
 122     }
 123 }
 124
 125 /* Simplified version with no edge detection */
 126 static void omap_set_intr_noedge(void *opaque, int irq, int req)
 127 {
 128     struct omap_intr_handler_s *ih = (struct omap_intr_handler_s *) opaque;
 129     uint32_t rise;
 130
 131     struct omap_intr_handler_bank_s *bank = &ih->bank[irq >> 5];
 132     int n = irq & 31;
 133
 134     if (req) {
 135         rise = ~bank->inputs & (1 << n);
 136         if (rise) {
 137             bank->irqs |= bank->inputs |= rise;
 138             omap_inth_update(ih, 0);
 139             omap_inth_update(ih, 1);
 140         }
 141     } else
 142         bank->irqs = (bank->inputs &= ~(1 << n)) | bank->swi;
 143 }
 144
 145 static uint32_t omap_inth_read(void *opaque, target_phys_addr_t addr)
 146 {
 147     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 148     int i, offset = addr;
 149     int bank_no = offset >> 8;
 150     int line_no;
 151     struct omap_intr_handler_bank_s *bank = &s->bank[bank_no];
 152     offset &= 0xff;
 153
 154     switch (offset) {
 155     case 0x00:  /* ITR */
 156         return bank->irqs;
 157
 158     case 0x04:  /* MIR */
 159         return bank->mask;
 160
 161     case 0x10:  /* SIR_IRQ_CODE */
 162     case 0x14:  /* SIR_FIQ_CODE */
 163         if (bank_no != 0)
 164             break;
 165         line_no = s->sir_intr[(offset - 0x10) >> 2];
 166         bank = &s->bank[line_no >> 5];
 167         i = line_no & 31;
 168         if (((bank->sens_edge >> i) & 1) == INT_FALLING_EDGE)
 169             bank->irqs &= ~(1 << i);
 170         return line_no;
 171
 172     case 0x18:  /* CONTROL_REG */
 173         if (bank_no != 0)
 174             break;
 175         return 0;
 176
 177     case 0x1c:  /* ILR0 */
 178     case 0x20:  /* ILR1 */
 179     case 0x24:  /* ILR2 */
 180     case 0x28:  /* ILR3 */
 181     case 0x2c:  /* ILR4 */
 182     case 0x30:  /* ILR5 */
 183     case 0x34:  /* ILR6 */
 184     case 0x38:  /* ILR7 */
 185     case 0x3c:  /* ILR8 */
 186     case 0x40:  /* ILR9 */
 187     case 0x44:  /* ILR10 */
 188     case 0x48:  /* ILR11 */
 189     case 0x4c:  /* ILR12 */
 190     case 0x50:  /* ILR13 */
 191     case 0x54:  /* ILR14 */
 192     case 0x58:  /* ILR15 */
 193     case 0x5c:  /* ILR16 */
 194     case 0x60:  /* ILR17 */
 195     case 0x64:  /* ILR18 */
 196     case 0x68:  /* ILR19 */
 197     case 0x6c:  /* ILR20 */
 198     case 0x70:  /* ILR21 */
 199     case 0x74:  /* ILR22 */
 200     case 0x78:  /* ILR23 */
 201     case 0x7c:  /* ILR24 */
 202     case 0x80:  /* ILR25 */
 203     case 0x84:  /* ILR26 */
 204     case 0x88:  /* ILR27 */
 205     case 0x8c:  /* ILR28 */
 206     case 0x90:  /* ILR29 */
 207     case 0x94:  /* ILR30 */
 208     case 0x98:  /* ILR31 */
 209         i = (offset - 0x1c) >> 2;
 210         return (bank->priority[i] << 2) |
 211                 (((bank->sens_edge >> i) & 1) << 1) |
 212                 ((bank->fiq >> i) & 1);
 213
 214     case 0x9c:  /* ISR */
 215         return 0x00000000;
 216
 217     }
 218     OMAP_BAD_REG(addr);
 219     return 0;
 220 }
 221
 222 static void omap_inth_write(void *opaque, target_phys_addr_t addr,
 223                 uint32_t value)
 224 {
 225     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 226     int i, offset = addr;
 227     int bank_no = offset >> 8;
 228     struct omap_intr_handler_bank_s *bank = &s->bank[bank_no];
 229     offset &= 0xff;
 230
 231     switch (offset) {
 232     case 0x00:  /* ITR */
 233         /* Important: ignore the clearing if the IRQ is level-triggered and
 234            the input bit is 1 */
 235         bank->irqs &= value | (bank->inputs & bank->sens_edge);
 236         return;
 237
 238     case 0x04:  /* MIR */
 239         bank->mask = value;
 240         omap_inth_update(s, 0);
 241         omap_inth_update(s, 1);
 242         return;
 243
 244     case 0x10:  /* SIR_IRQ_CODE */
 245     case 0x14:  /* SIR_FIQ_CODE */
 246         OMAP_RO_REG(addr);
 247         break;
 248
 249     case 0x18:  /* CONTROL_REG */
 250         if (bank_no != 0)
 251             break;
 252         if (value & 2) {
 253             qemu_set_irq(s->parent_intr[1], 0);
 254             s->new_agr[1] = ~0;
 255             omap_inth_update(s, 1);
 256         }
 257         if (value & 1) {
 258             qemu_set_irq(s->parent_intr[0], 0);
 259             s->new_agr[0] = ~0;
 260             omap_inth_update(s, 0);
 261         }
 262         return;
 263
 264     case 0x1c:  /* ILR0 */
 265     case 0x20:  /* ILR1 */
 266     case 0x24:  /* ILR2 */
 267     case 0x28:  /* ILR3 */
 268     case 0x2c:  /* ILR4 */
 269     case 0x30:  /* ILR5 */
 270     case 0x34:  /* ILR6 */
 271     case 0x38:  /* ILR7 */
 272     case 0x3c:  /* ILR8 */
 273     case 0x40:  /* ILR9 */
 274     case 0x44:  /* ILR10 */
 275     case 0x48:  /* ILR11 */
 276     case 0x4c:  /* ILR12 */
 277     case 0x50:  /* ILR13 */
 278     case 0x54:  /* ILR14 */
 279     case 0x58:  /* ILR15 */
 280     case 0x5c:  /* ILR16 */
 281     case 0x60:  /* ILR17 */
 282     case 0x64:  /* ILR18 */
 283     case 0x68:  /* ILR19 */
 284     case 0x6c:  /* ILR20 */
 285     case 0x70:  /* ILR21 */
 286     case 0x74:  /* ILR22 */
 287     case 0x78:  /* ILR23 */
 288     case 0x7c:  /* ILR24 */
 289     case 0x80:  /* ILR25 */
 290     case 0x84:  /* ILR26 */
 291     case 0x88:  /* ILR27 */
 292     case 0x8c:  /* ILR28 */
 293     case 0x90:  /* ILR29 */
 294     case 0x94:  /* ILR30 */
 295     case 0x98:  /* ILR31 */
 296         i = (offset - 0x1c) >> 2;
 297         bank->priority[i] = (value >> 2) & 0x1f;
 298         bank->sens_edge &= ~(1 << i);
 299         bank->sens_edge |= ((value >> 1) & 1) << i;
 300         bank->fiq &= ~(1 << i);
 301         bank->fiq |= (value & 1) << i;
 302         return;
 303
 304     case 0x9c:  /* ISR */
 305         for (i = 0; i < 32; i ++)
 306             if (value & (1 << i)) {
 307                 omap_set_intr(s, 32 * bank_no + i, 1);
 308                 return;
 309             }
 310         return;
 311     }
 312     OMAP_BAD_REG(addr);
 313 }
 314
 315 static CPUReadMemoryFunc * const omap_inth_readfn[] = {
 316     omap_badwidth_read32,
 317     omap_badwidth_read32,
 318     omap_inth_read,
 319 };
 320
 321 static CPUWriteMemoryFunc * const omap_inth_writefn[] = {
 322     omap_inth_write,
 323     omap_inth_write,
 324     omap_inth_write,
 325 };
 326
 327 void omap_inth_reset(struct omap_intr_handler_s *s)
 328 {
 329     int i;
 330
 331     for (i = 0; i < s->nbanks; ++i){
 332         s->bank[i].irqs = 0x00000000;
 333         s->bank[i].mask = 0xffffffff;
 334         s->bank[i].sens_edge = 0x00000000;
 335         s->bank[i].fiq = 0x00000000;
 336         s->bank[i].inputs = 0x00000000;
 337         s->bank[i].swi = 0x00000000;
 338         memset(s->bank[i].priority, 0, sizeof(s->bank[i].priority));
 339
 340         if (s->level_only)
 341             s->bank[i].sens_edge = 0xffffffff;
 342     }
 343
 344     s->new_agr[0] = ~0;
 345     s->new_agr[1] = ~0;
 346     s->sir_intr[0] = 0;
 347     s->sir_intr[1] = 0;
 348     s->autoidle = 0;
 349     s->mask = ~0;
 350
 351     qemu_set_irq(s->parent_intr[0], 0);
 352     qemu_set_irq(s->parent_intr[1], 0);
 353 }
 354
 355 struct omap_intr_handler_s *omap_inth_init(target_phys_addr_t base,
 356                 unsigned long size, unsigned char nbanks, qemu_irq **pins,
 357                 qemu_irq parent_irq, qemu_irq parent_fiq, omap_clk clk)
 358 {
 359     int iomemtype;
 360     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *)
 361             qemu_mallocz(sizeof(struct omap_intr_handler_s) +
 362                             sizeof(struct omap_intr_handler_bank_s) * nbanks);
 363
 364     s->parent_intr[0] = parent_irq;
 365     s->parent_intr[1] = parent_fiq;
 366     s->nbanks = nbanks;
 367     s->pins = qemu_allocate_irqs(omap_set_intr, s, nbanks * 32);
 368     if (pins)
 369         *pins = s->pins;
 370
 371     omap_inth_reset(s);
 372
 373     iomemtype = cpu_register_io_memory(omap_inth_readfn,
 374                     omap_inth_writefn, s, DEVICE_NATIVE_ENDIAN);
 375     cpu_register_physical_memory(base, size, iomemtype);
 376
 377     return s;
 378 }
 379
 380 static uint32_t omap2_inth_read(void *opaque, target_phys_addr_t addr)
 381 {
 382     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 383     int offset = addr;
 384     int bank_no, line_no;
 385     struct omap_intr_handler_bank_s *bank = NULL;
 386
 387     if ((offset & 0xf80) == 0x80) {
 388         bank_no = (offset & 0x60) >> 5;
 389         if (bank_no < s->nbanks) {
 390             offset &= ~0x60;
 391             bank = &s->bank[bank_no];
 392         }
 393     }
 394
 395     switch (offset) {
 396     case 0x00:  /* INTC_REVISION */
 397         return 0x21;
 398
 399     case 0x10:  /* INTC_SYSCONFIG */
 400         return (s->autoidle >> 2) & 1;
 401
 402     case 0x14:  /* INTC_SYSSTATUS */
 403         return 1;                                               /* RESETDONE */
 404
 405     case 0x40:  /* INTC_SIR_IRQ */
 406         return s->sir_intr[0];
 407
 408     case 0x44:  /* INTC_SIR_FIQ */
 409         return s->sir_intr[1];
 410
 411     case 0x48:  /* INTC_CONTROL */
 412         return (!s->mask) << 2;                                 /* GLOBALMASK */
 413
 414     case 0x4c:  /* INTC_PROTECTION */
 415         return 0;
 416
 417     case 0x50:  /* INTC_IDLE */
 418         return s->autoidle & 3;
 419
 420     /* Per-bank registers */
 421     case 0x80:  /* INTC_ITR */
 422         return bank->inputs;
 423
 424     case 0x84:  /* INTC_MIR */
 425         return bank->mask;
 426
 427     case 0x88:  /* INTC_MIR_CLEAR */
 428     case 0x8c:  /* INTC_MIR_SET */
 429         return 0;
 430
 431     case 0x90:  /* INTC_ISR_SET */
 432         return bank->swi;
 433
 434     case 0x94:  /* INTC_ISR_CLEAR */
 435         return 0;
 436
 437     case 0x98:  /* INTC_PENDING_IRQ */
 438         return bank->irqs & ~bank->mask & ~bank->fiq;
 439
 440     case 0x9c:  /* INTC_PENDING_FIQ */
 441         return bank->irqs & ~bank->mask & bank->fiq;
 442
 443     /* Per-line registers */
 444     case 0x100 ... 0x300:       /* INTC_ILR */
 445         bank_no = (offset - 0x100) >> 7;
 446         if (bank_no > s->nbanks)
 447             break;
 448         bank = &s->bank[bank_no];
 449         line_no = (offset & 0x7f) >> 2;
 450         return (bank->priority[line_no] << 2) |
 451                 ((bank->fiq >> line_no) & 1);
 452     }
 453     OMAP_BAD_REG(addr);
 454     return 0;
 455 }
 456
 457 static void omap2_inth_write(void *opaque, target_phys_addr_t addr,
 458                 uint32_t value)
 459 {
 460     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *) opaque;
 461     int offset = addr;
 462     int bank_no, line_no;
 463     struct omap_intr_handler_bank_s *bank = NULL;
 464
 465     if ((offset & 0xf80) == 0x80) {
 466         bank_no = (offset & 0x60) >> 5;
 467         if (bank_no < s->nbanks) {
 468             offset &= ~0x60;
 469             bank = &s->bank[bank_no];
 470         }
 471     }
 472
 473     switch (offset) {
 474     case 0x10:  /* INTC_SYSCONFIG */
 475         s->autoidle &= 4;
 476         s->autoidle |= (value & 1) << 2;
 477         if (value & 2)                                          /* SOFTRESET */
 478             omap_inth_reset(s);
 479         return;
 480
 481     case 0x48:  /* INTC_CONTROL */
 482         s->mask = (value & 4) ? 0 : ~0;                         /* GLOBALMASK */
 483         if (value & 2) {                                        /* NEWFIQAGR */
 484             qemu_set_irq(s->parent_intr[1], 0);
 485             s->new_agr[1] = ~0;
 486             omap_inth_update(s, 1);
 487         }
 488         if (value & 1) {                                        /* NEWIRQAGR */
 489             qemu_set_irq(s->parent_intr[0], 0);
 490             s->new_agr[0] = ~0;
 491             omap_inth_update(s, 0);
 492         }
 493         return;
 494
 495     case 0x4c:  /* INTC_PROTECTION */
 496         /* TODO: Make a bitmap (or sizeof(char)map) of access privileges
 497          * for every register, see Chapter 3 and 4 for privileged mode.  */
 498         if (value & 1)
 499             fprintf(stderr, "%s: protection mode enable attempt\n",
 500                             __FUNCTION__);
 501         return;
 502
 503     case 0x50:  /* INTC_IDLE */
 504         s->autoidle &= ~3;
 505         s->autoidle |= value & 3;
 506         return;
 507
 508     /* Per-bank registers */
 509     case 0x84:  /* INTC_MIR */
 510         bank->mask = value;
 511         omap_inth_update(s, 0);
 512         omap_inth_update(s, 1);
 513         return;
 514
 515     case 0x88:  /* INTC_MIR_CLEAR */
 516         bank->mask &= ~value;
 517         omap_inth_update(s, 0);
 518         omap_inth_update(s, 1);
 519         return;
 520
 521     case 0x8c:  /* INTC_MIR_SET */
 522         bank->mask |= value;
 523         return;
 524
 525     case 0x90:  /* INTC_ISR_SET */
 526         bank->irqs |= bank->swi |= value;
 527         omap_inth_update(s, 0);
 528         omap_inth_update(s, 1);
 529         return;
 530
 531     case 0x94:  /* INTC_ISR_CLEAR */
 532         bank->swi &= ~value;
 533         bank->irqs = bank->swi & bank->inputs;
 534         return;
 535
 536     /* Per-line registers */
 537     case 0x100 ... 0x300:       /* INTC_ILR */
 538         bank_no = (offset - 0x100) >> 7;
 539         if (bank_no > s->nbanks)
 540             break;
 541         bank = &s->bank[bank_no];
 542         line_no = (offset & 0x7f) >> 2;
 543         bank->priority[line_no] = (value >> 2) & 0x3f;
 544         bank->fiq &= ~(1 << line_no);
 545         bank->fiq |= (value & 1) << line_no;
 546         return;
 547
 548     case 0x00:  /* INTC_REVISION */
 549     case 0x14:  /* INTC_SYSSTATUS */
 550     case 0x40:  /* INTC_SIR_IRQ */
 551     case 0x44:  /* INTC_SIR_FIQ */
 552     case 0x80:  /* INTC_ITR */
 553     case 0x98:  /* INTC_PENDING_IRQ */
 554     case 0x9c:  /* INTC_PENDING_FIQ */
 555         OMAP_RO_REG(addr);
 556         return;
 557     }
 558     OMAP_BAD_REG(addr);
 559 }
 560
 561 static CPUReadMemoryFunc * const omap2_inth_readfn[] = {
 562     omap_badwidth_read32,
 563     omap_badwidth_read32,
 564     omap2_inth_read,
 565 };
 566
 567 static CPUWriteMemoryFunc * const omap2_inth_writefn[] = {
 568     omap2_inth_write,
 569     omap2_inth_write,
 570     omap2_inth_write,
 571 };
 572
 573 struct omap_intr_handler_s *omap2_inth_init(target_phys_addr_t base,
 574                 int size, int nbanks, qemu_irq **pins,
 575                 qemu_irq parent_irq, qemu_irq parent_fiq,
 576                 omap_clk fclk, omap_clk iclk)
 577 {
 578     int iomemtype;
 579     struct omap_intr_handler_s *s = (struct omap_intr_handler_s *)
 580             qemu_mallocz(sizeof(struct omap_intr_handler_s) +
 581                             sizeof(struct omap_intr_handler_bank_s) * nbanks);
 582
 583     s->parent_intr[0] = parent_irq;
 584     s->parent_intr[1] = parent_fiq;
 585     s->nbanks = nbanks;
 586     s->level_only = 1;
 587     s->pins = qemu_allocate_irqs(omap_set_intr_noedge, s, nbanks * 32);
 588     if (pins)
 589         *pins = s->pins;
 590
 591     omap_inth_reset(s);
 592
 593     iomemtype = cpu_register_io_memory(omap2_inth_readfn,
 594                     omap2_inth_writefn, s, DEVICE_NATIVE_ENDIAN);
 595     cpu_register_physical_memory(base, size, iomemtype);
 596
 597     return s;
 598 }