target-i386: Add API to get note's size
[qemu/ar7.git] / hw / rc4030.c
blob9f39b30505491a5bcce3c64de9214ee99e8f4bf0
1 /*
2 * QEMU JAZZ RC4030 chipset
4 * Copyright (c) 2007-2009 Herve Poussineau
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
25 #include "hw.h"
26 #include "mips.h"
27 #include "qemu-timer.h"
29 /********************************************************/
30 /* debug rc4030 */
32 //#define DEBUG_RC4030
33 //#define DEBUG_RC4030_DMA
35 #ifdef DEBUG_RC4030
36 #define DPRINTF(fmt, ...) \
37 do { printf("rc4030: " fmt , ## __VA_ARGS__); } while (0)
38 static const char* irq_names[] = { "parallel", "floppy", "sound", "video",
39 "network", "scsi", "keyboard", "mouse", "serial0", "serial1" };
40 #else
41 #define DPRINTF(fmt, ...)
42 #endif
44 #define RC4030_ERROR(fmt, ...) \
45 do { fprintf(stderr, "rc4030 ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0)
47 /********************************************************/
48 /* rc4030 emulation */
50 typedef struct dma_pagetable_entry {
51 int32_t frame;
52 int32_t owner;
53 } QEMU_PACKED dma_pagetable_entry;
55 #define DMA_PAGESIZE 4096
56 #define DMA_REG_ENABLE 1
57 #define DMA_REG_COUNT 2
58 #define DMA_REG_ADDRESS 3
60 #define DMA_FLAG_ENABLE 0x0001
61 #define DMA_FLAG_MEM_TO_DEV 0x0002
62 #define DMA_FLAG_TC_INTR 0x0100
63 #define DMA_FLAG_MEM_INTR 0x0200
64 #define DMA_FLAG_ADDR_INTR 0x0400
66 typedef struct rc4030State
68 uint32_t config; /* 0x0000: RC4030 config register */
69 uint32_t revision; /* 0x0008: RC4030 Revision register */
70 uint32_t invalid_address_register; /* 0x0010: Invalid Address register */
72 /* DMA */
73 uint32_t dma_regs[8][4];
74 uint32_t dma_tl_base; /* 0x0018: DMA transl. table base */
75 uint32_t dma_tl_limit; /* 0x0020: DMA transl. table limit */
77 /* cache */
78 uint32_t cache_maint; /* 0x0030: Cache Maintenance */
79 uint32_t remote_failed_address; /* 0x0038: Remote Failed Address */
80 uint32_t memory_failed_address; /* 0x0040: Memory Failed Address */
81 uint32_t cache_ptag; /* 0x0048: I/O Cache Physical Tag */
82 uint32_t cache_ltag; /* 0x0050: I/O Cache Logical Tag */
83 uint32_t cache_bmask; /* 0x0058: I/O Cache Byte Mask */
85 uint32_t nmi_interrupt; /* 0x0200: interrupt source */
86 uint32_t offset210;
87 uint32_t nvram_protect; /* 0x0220: NV ram protect register */
88 uint32_t rem_speed[16];
89 uint32_t imr_jazz; /* Local bus int enable mask */
90 uint32_t isr_jazz; /* Local bus int source */
92 /* timer */
93 QEMUTimer *periodic_timer;
94 uint32_t itr; /* Interval timer reload */
96 qemu_irq timer_irq;
97 qemu_irq jazz_bus_irq;
99 MemoryRegion iomem_chipset;
100 MemoryRegion iomem_jazzio;
101 } rc4030State;
103 static void set_next_tick(rc4030State *s)
105 qemu_irq_lower(s->timer_irq);
106 uint32_t tm_hz;
108 tm_hz = 1000 / (s->itr + 1);
110 qemu_mod_timer(s->periodic_timer, qemu_get_clock_ns(vm_clock) +
111 get_ticks_per_sec() / tm_hz);
114 /* called for accesses to rc4030 */
115 static uint32_t rc4030_readl(void *opaque, target_phys_addr_t addr)
117 rc4030State *s = opaque;
118 uint32_t val;
120 addr &= 0x3fff;
121 switch (addr & ~0x3) {
122 /* Global config register */
123 case 0x0000:
124 val = s->config;
125 break;
126 /* Revision register */
127 case 0x0008:
128 val = s->revision;
129 break;
130 /* Invalid Address register */
131 case 0x0010:
132 val = s->invalid_address_register;
133 break;
134 /* DMA transl. table base */
135 case 0x0018:
136 val = s->dma_tl_base;
137 break;
138 /* DMA transl. table limit */
139 case 0x0020:
140 val = s->dma_tl_limit;
141 break;
142 /* Remote Failed Address */
143 case 0x0038:
144 val = s->remote_failed_address;
145 break;
146 /* Memory Failed Address */
147 case 0x0040:
148 val = s->memory_failed_address;
149 break;
150 /* I/O Cache Byte Mask */
151 case 0x0058:
152 val = s->cache_bmask;
153 /* HACK */
154 if (s->cache_bmask == (uint32_t)-1)
155 s->cache_bmask = 0;
156 break;
157 /* Remote Speed Registers */
158 case 0x0070:
159 case 0x0078:
160 case 0x0080:
161 case 0x0088:
162 case 0x0090:
163 case 0x0098:
164 case 0x00a0:
165 case 0x00a8:
166 case 0x00b0:
167 case 0x00b8:
168 case 0x00c0:
169 case 0x00c8:
170 case 0x00d0:
171 case 0x00d8:
172 case 0x00e0:
173 case 0x00e8:
174 val = s->rem_speed[(addr - 0x0070) >> 3];
175 break;
176 /* DMA channel base address */
177 case 0x0100:
178 case 0x0108:
179 case 0x0110:
180 case 0x0118:
181 case 0x0120:
182 case 0x0128:
183 case 0x0130:
184 case 0x0138:
185 case 0x0140:
186 case 0x0148:
187 case 0x0150:
188 case 0x0158:
189 case 0x0160:
190 case 0x0168:
191 case 0x0170:
192 case 0x0178:
193 case 0x0180:
194 case 0x0188:
195 case 0x0190:
196 case 0x0198:
197 case 0x01a0:
198 case 0x01a8:
199 case 0x01b0:
200 case 0x01b8:
201 case 0x01c0:
202 case 0x01c8:
203 case 0x01d0:
204 case 0x01d8:
205 case 0x01e0:
206 case 0x01e8:
207 case 0x01f0:
208 case 0x01f8:
210 int entry = (addr - 0x0100) >> 5;
211 int idx = (addr & 0x1f) >> 3;
212 val = s->dma_regs[entry][idx];
214 break;
215 /* Interrupt source */
216 case 0x0200:
217 val = s->nmi_interrupt;
218 break;
219 /* Error type */
220 case 0x0208:
221 val = 0;
222 break;
223 /* Offset 0x0210 */
224 case 0x0210:
225 val = s->offset210;
226 break;
227 /* NV ram protect register */
228 case 0x0220:
229 val = s->nvram_protect;
230 break;
231 /* Interval timer count */
232 case 0x0230:
233 val = 0;
234 qemu_irq_lower(s->timer_irq);
235 break;
236 /* EISA interrupt */
237 case 0x0238:
238 val = 7; /* FIXME: should be read from EISA controller */
239 break;
240 default:
241 RC4030_ERROR("invalid read [" TARGET_FMT_plx "]\n", addr);
242 val = 0;
243 break;
246 if ((addr & ~3) != 0x230) {
247 DPRINTF("read 0x%02x at " TARGET_FMT_plx "\n", val, addr);
250 return val;
253 static uint32_t rc4030_readw(void *opaque, target_phys_addr_t addr)
255 uint32_t v = rc4030_readl(opaque, addr & ~0x3);
256 if (addr & 0x2)
257 return v >> 16;
258 else
259 return v & 0xffff;
262 static uint32_t rc4030_readb(void *opaque, target_phys_addr_t addr)
264 uint32_t v = rc4030_readl(opaque, addr & ~0x3);
265 return (v >> (8 * (addr & 0x3))) & 0xff;
268 static void rc4030_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
270 rc4030State *s = opaque;
271 addr &= 0x3fff;
273 DPRINTF("write 0x%02x at " TARGET_FMT_plx "\n", val, addr);
275 switch (addr & ~0x3) {
276 /* Global config register */
277 case 0x0000:
278 s->config = val;
279 break;
280 /* DMA transl. table base */
281 case 0x0018:
282 s->dma_tl_base = val;
283 break;
284 /* DMA transl. table limit */
285 case 0x0020:
286 s->dma_tl_limit = val;
287 break;
288 /* DMA transl. table invalidated */
289 case 0x0028:
290 break;
291 /* Cache Maintenance */
292 case 0x0030:
293 s->cache_maint = val;
294 break;
295 /* I/O Cache Physical Tag */
296 case 0x0048:
297 s->cache_ptag = val;
298 break;
299 /* I/O Cache Logical Tag */
300 case 0x0050:
301 s->cache_ltag = val;
302 break;
303 /* I/O Cache Byte Mask */
304 case 0x0058:
305 s->cache_bmask |= val; /* HACK */
306 break;
307 /* I/O Cache Buffer Window */
308 case 0x0060:
309 /* HACK */
310 if (s->cache_ltag == 0x80000001 && s->cache_bmask == 0xf0f0f0f) {
311 target_phys_addr_t dest = s->cache_ptag & ~0x1;
312 dest += (s->cache_maint & 0x3) << 3;
313 cpu_physical_memory_write(dest, &val, 4);
315 break;
316 /* Remote Speed Registers */
317 case 0x0070:
318 case 0x0078:
319 case 0x0080:
320 case 0x0088:
321 case 0x0090:
322 case 0x0098:
323 case 0x00a0:
324 case 0x00a8:
325 case 0x00b0:
326 case 0x00b8:
327 case 0x00c0:
328 case 0x00c8:
329 case 0x00d0:
330 case 0x00d8:
331 case 0x00e0:
332 case 0x00e8:
333 s->rem_speed[(addr - 0x0070) >> 3] = val;
334 break;
335 /* DMA channel base address */
336 case 0x0100:
337 case 0x0108:
338 case 0x0110:
339 case 0x0118:
340 case 0x0120:
341 case 0x0128:
342 case 0x0130:
343 case 0x0138:
344 case 0x0140:
345 case 0x0148:
346 case 0x0150:
347 case 0x0158:
348 case 0x0160:
349 case 0x0168:
350 case 0x0170:
351 case 0x0178:
352 case 0x0180:
353 case 0x0188:
354 case 0x0190:
355 case 0x0198:
356 case 0x01a0:
357 case 0x01a8:
358 case 0x01b0:
359 case 0x01b8:
360 case 0x01c0:
361 case 0x01c8:
362 case 0x01d0:
363 case 0x01d8:
364 case 0x01e0:
365 case 0x01e8:
366 case 0x01f0:
367 case 0x01f8:
369 int entry = (addr - 0x0100) >> 5;
370 int idx = (addr & 0x1f) >> 3;
371 s->dma_regs[entry][idx] = val;
373 break;
374 /* Offset 0x0210 */
375 case 0x0210:
376 s->offset210 = val;
377 break;
378 /* Interval timer reload */
379 case 0x0228:
380 s->itr = val;
381 qemu_irq_lower(s->timer_irq);
382 set_next_tick(s);
383 break;
384 /* EISA interrupt */
385 case 0x0238:
386 break;
387 default:
388 RC4030_ERROR("invalid write of 0x%02x at [" TARGET_FMT_plx "]\n", val, addr);
389 break;
393 static void rc4030_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
395 uint32_t old_val = rc4030_readl(opaque, addr & ~0x3);
397 if (addr & 0x2)
398 val = (val << 16) | (old_val & 0x0000ffff);
399 else
400 val = val | (old_val & 0xffff0000);
401 rc4030_writel(opaque, addr & ~0x3, val);
404 static void rc4030_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
406 uint32_t old_val = rc4030_readl(opaque, addr & ~0x3);
408 switch (addr & 3) {
409 case 0:
410 val = val | (old_val & 0xffffff00);
411 break;
412 case 1:
413 val = (val << 8) | (old_val & 0xffff00ff);
414 break;
415 case 2:
416 val = (val << 16) | (old_val & 0xff00ffff);
417 break;
418 case 3:
419 val = (val << 24) | (old_val & 0x00ffffff);
420 break;
422 rc4030_writel(opaque, addr & ~0x3, val);
425 static const MemoryRegionOps rc4030_ops = {
426 .old_mmio = {
427 .read = { rc4030_readb, rc4030_readw, rc4030_readl, },
428 .write = { rc4030_writeb, rc4030_writew, rc4030_writel, },
430 .endianness = DEVICE_NATIVE_ENDIAN,
433 static void update_jazz_irq(rc4030State *s)
435 uint16_t pending;
437 pending = s->isr_jazz & s->imr_jazz;
439 #ifdef DEBUG_RC4030
440 if (s->isr_jazz != 0) {
441 uint32_t irq = 0;
442 DPRINTF("pending irqs:");
443 for (irq = 0; irq < ARRAY_SIZE(irq_names); irq++) {
444 if (s->isr_jazz & (1 << irq)) {
445 printf(" %s", irq_names[irq]);
446 if (!(s->imr_jazz & (1 << irq))) {
447 printf("(ignored)");
451 printf("\n");
453 #endif
455 if (pending != 0)
456 qemu_irq_raise(s->jazz_bus_irq);
457 else
458 qemu_irq_lower(s->jazz_bus_irq);
461 static void rc4030_irq_jazz_request(void *opaque, int irq, int level)
463 rc4030State *s = opaque;
465 if (level) {
466 s->isr_jazz |= 1 << irq;
467 } else {
468 s->isr_jazz &= ~(1 << irq);
471 update_jazz_irq(s);
474 static void rc4030_periodic_timer(void *opaque)
476 rc4030State *s = opaque;
478 set_next_tick(s);
479 qemu_irq_raise(s->timer_irq);
482 static uint32_t jazzio_readw(void *opaque, target_phys_addr_t addr)
484 rc4030State *s = opaque;
485 uint32_t val;
486 uint32_t irq;
487 addr &= 0xfff;
489 switch (addr) {
490 /* Local bus int source */
491 case 0x00: {
492 uint32_t pending = s->isr_jazz & s->imr_jazz;
493 val = 0;
494 irq = 0;
495 while (pending) {
496 if (pending & 1) {
497 DPRINTF("returning irq %s\n", irq_names[irq]);
498 val = (irq + 1) << 2;
499 break;
501 irq++;
502 pending >>= 1;
504 break;
506 /* Local bus int enable mask */
507 case 0x02:
508 val = s->imr_jazz;
509 break;
510 default:
511 RC4030_ERROR("(jazz io controller) invalid read [" TARGET_FMT_plx "]\n", addr);
512 val = 0;
515 DPRINTF("(jazz io controller) read 0x%04x at " TARGET_FMT_plx "\n", val, addr);
517 return val;
520 static uint32_t jazzio_readb(void *opaque, target_phys_addr_t addr)
522 uint32_t v;
523 v = jazzio_readw(opaque, addr & ~0x1);
524 return (v >> (8 * (addr & 0x1))) & 0xff;
527 static uint32_t jazzio_readl(void *opaque, target_phys_addr_t addr)
529 uint32_t v;
530 v = jazzio_readw(opaque, addr);
531 v |= jazzio_readw(opaque, addr + 2) << 16;
532 return v;
535 static void jazzio_writew(void *opaque, target_phys_addr_t addr, uint32_t val)
537 rc4030State *s = opaque;
538 addr &= 0xfff;
540 DPRINTF("(jazz io controller) write 0x%04x at " TARGET_FMT_plx "\n", val, addr);
542 switch (addr) {
543 /* Local bus int enable mask */
544 case 0x02:
545 s->imr_jazz = val;
546 update_jazz_irq(s);
547 break;
548 default:
549 RC4030_ERROR("(jazz io controller) invalid write of 0x%04x at [" TARGET_FMT_plx "]\n", val, addr);
550 break;
554 static void jazzio_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
556 uint32_t old_val = jazzio_readw(opaque, addr & ~0x1);
558 switch (addr & 1) {
559 case 0:
560 val = val | (old_val & 0xff00);
561 break;
562 case 1:
563 val = (val << 8) | (old_val & 0x00ff);
564 break;
566 jazzio_writew(opaque, addr & ~0x1, val);
569 static void jazzio_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
571 jazzio_writew(opaque, addr, val & 0xffff);
572 jazzio_writew(opaque, addr + 2, (val >> 16) & 0xffff);
575 static const MemoryRegionOps jazzio_ops = {
576 .old_mmio = {
577 .read = { jazzio_readb, jazzio_readw, jazzio_readl, },
578 .write = { jazzio_writeb, jazzio_writew, jazzio_writel, },
580 .endianness = DEVICE_NATIVE_ENDIAN,
583 static void rc4030_reset(void *opaque)
585 rc4030State *s = opaque;
586 int i;
588 s->config = 0x410; /* some boards seem to accept 0x104 too */
589 s->revision = 1;
590 s->invalid_address_register = 0;
592 memset(s->dma_regs, 0, sizeof(s->dma_regs));
593 s->dma_tl_base = s->dma_tl_limit = 0;
595 s->remote_failed_address = s->memory_failed_address = 0;
596 s->cache_maint = 0;
597 s->cache_ptag = s->cache_ltag = 0;
598 s->cache_bmask = 0;
600 s->offset210 = 0x18186;
601 s->nvram_protect = 7;
602 for (i = 0; i < 15; i++)
603 s->rem_speed[i] = 7;
604 s->imr_jazz = 0x10; /* XXX: required by firmware, but why? */
605 s->isr_jazz = 0;
607 s->itr = 0;
609 qemu_irq_lower(s->timer_irq);
610 qemu_irq_lower(s->jazz_bus_irq);
613 static int rc4030_load(QEMUFile *f, void *opaque, int version_id)
615 rc4030State* s = opaque;
616 int i, j;
618 if (version_id != 2)
619 return -EINVAL;
621 s->config = qemu_get_be32(f);
622 s->invalid_address_register = qemu_get_be32(f);
623 for (i = 0; i < 8; i++)
624 for (j = 0; j < 4; j++)
625 s->dma_regs[i][j] = qemu_get_be32(f);
626 s->dma_tl_base = qemu_get_be32(f);
627 s->dma_tl_limit = qemu_get_be32(f);
628 s->cache_maint = qemu_get_be32(f);
629 s->remote_failed_address = qemu_get_be32(f);
630 s->memory_failed_address = qemu_get_be32(f);
631 s->cache_ptag = qemu_get_be32(f);
632 s->cache_ltag = qemu_get_be32(f);
633 s->cache_bmask = qemu_get_be32(f);
634 s->offset210 = qemu_get_be32(f);
635 s->nvram_protect = qemu_get_be32(f);
636 for (i = 0; i < 15; i++)
637 s->rem_speed[i] = qemu_get_be32(f);
638 s->imr_jazz = qemu_get_be32(f);
639 s->isr_jazz = qemu_get_be32(f);
640 s->itr = qemu_get_be32(f);
642 set_next_tick(s);
643 update_jazz_irq(s);
645 return 0;
648 static void rc4030_save(QEMUFile *f, void *opaque)
650 rc4030State* s = opaque;
651 int i, j;
653 qemu_put_be32(f, s->config);
654 qemu_put_be32(f, s->invalid_address_register);
655 for (i = 0; i < 8; i++)
656 for (j = 0; j < 4; j++)
657 qemu_put_be32(f, s->dma_regs[i][j]);
658 qemu_put_be32(f, s->dma_tl_base);
659 qemu_put_be32(f, s->dma_tl_limit);
660 qemu_put_be32(f, s->cache_maint);
661 qemu_put_be32(f, s->remote_failed_address);
662 qemu_put_be32(f, s->memory_failed_address);
663 qemu_put_be32(f, s->cache_ptag);
664 qemu_put_be32(f, s->cache_ltag);
665 qemu_put_be32(f, s->cache_bmask);
666 qemu_put_be32(f, s->offset210);
667 qemu_put_be32(f, s->nvram_protect);
668 for (i = 0; i < 15; i++)
669 qemu_put_be32(f, s->rem_speed[i]);
670 qemu_put_be32(f, s->imr_jazz);
671 qemu_put_be32(f, s->isr_jazz);
672 qemu_put_be32(f, s->itr);
675 void rc4030_dma_memory_rw(void *opaque, target_phys_addr_t addr, uint8_t *buf, int len, int is_write)
677 rc4030State *s = opaque;
678 target_phys_addr_t entry_addr;
679 target_phys_addr_t phys_addr;
680 dma_pagetable_entry entry;
681 int index;
682 int ncpy, i;
684 i = 0;
685 for (;;) {
686 if (i == len) {
687 break;
690 ncpy = DMA_PAGESIZE - (addr & (DMA_PAGESIZE - 1));
691 if (ncpy > len - i)
692 ncpy = len - i;
694 /* Get DMA translation table entry */
695 index = addr / DMA_PAGESIZE;
696 if (index >= s->dma_tl_limit / sizeof(dma_pagetable_entry)) {
697 break;
699 entry_addr = s->dma_tl_base + index * sizeof(dma_pagetable_entry);
700 /* XXX: not sure. should we really use only lowest bits? */
701 entry_addr &= 0x7fffffff;
702 cpu_physical_memory_read(entry_addr, &entry, sizeof(entry));
704 /* Read/write data at right place */
705 phys_addr = entry.frame + (addr & (DMA_PAGESIZE - 1));
706 cpu_physical_memory_rw(phys_addr, &buf[i], ncpy, is_write);
708 i += ncpy;
709 addr += ncpy;
713 static void rc4030_do_dma(void *opaque, int n, uint8_t *buf, int len, int is_write)
715 rc4030State *s = opaque;
716 target_phys_addr_t dma_addr;
717 int dev_to_mem;
719 s->dma_regs[n][DMA_REG_ENABLE] &= ~(DMA_FLAG_TC_INTR | DMA_FLAG_MEM_INTR | DMA_FLAG_ADDR_INTR);
721 /* Check DMA channel consistency */
722 dev_to_mem = (s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_MEM_TO_DEV) ? 0 : 1;
723 if (!(s->dma_regs[n][DMA_REG_ENABLE] & DMA_FLAG_ENABLE) ||
724 (is_write != dev_to_mem)) {
725 s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_MEM_INTR;
726 s->nmi_interrupt |= 1 << n;
727 return;
730 /* Get start address and len */
731 if (len > s->dma_regs[n][DMA_REG_COUNT])
732 len = s->dma_regs[n][DMA_REG_COUNT];
733 dma_addr = s->dma_regs[n][DMA_REG_ADDRESS];
735 /* Read/write data at right place */
736 rc4030_dma_memory_rw(opaque, dma_addr, buf, len, is_write);
738 s->dma_regs[n][DMA_REG_ENABLE] |= DMA_FLAG_TC_INTR;
739 s->dma_regs[n][DMA_REG_COUNT] -= len;
741 #ifdef DEBUG_RC4030_DMA
743 int i, j;
744 printf("rc4030 dma: Copying %d bytes %s host %p\n",
745 len, is_write ? "from" : "to", buf);
746 for (i = 0; i < len; i += 16) {
747 int n = 16;
748 if (n > len - i) {
749 n = len - i;
751 for (j = 0; j < n; j++)
752 printf("%02x ", buf[i + j]);
753 while (j++ < 16)
754 printf(" ");
755 printf("| ");
756 for (j = 0; j < n; j++)
757 printf("%c", isprint(buf[i + j]) ? buf[i + j] : '.');
758 printf("\n");
761 #endif
764 struct rc4030DMAState {
765 void *opaque;
766 int n;
769 void rc4030_dma_read(void *dma, uint8_t *buf, int len)
771 rc4030_dma s = dma;
772 rc4030_do_dma(s->opaque, s->n, buf, len, 0);
775 void rc4030_dma_write(void *dma, uint8_t *buf, int len)
777 rc4030_dma s = dma;
778 rc4030_do_dma(s->opaque, s->n, buf, len, 1);
781 static rc4030_dma *rc4030_allocate_dmas(void *opaque, int n)
783 rc4030_dma *s;
784 struct rc4030DMAState *p;
785 int i;
787 s = (rc4030_dma *)g_malloc0(sizeof(rc4030_dma) * n);
788 p = (struct rc4030DMAState *)g_malloc0(sizeof(struct rc4030DMAState) * n);
789 for (i = 0; i < n; i++) {
790 p->opaque = opaque;
791 p->n = i;
792 s[i] = p;
793 p++;
795 return s;
798 void *rc4030_init(qemu_irq timer, qemu_irq jazz_bus,
799 qemu_irq **irqs, rc4030_dma **dmas,
800 MemoryRegion *sysmem)
802 rc4030State *s;
804 s = g_malloc0(sizeof(rc4030State));
806 *irqs = qemu_allocate_irqs(rc4030_irq_jazz_request, s, 16);
807 *dmas = rc4030_allocate_dmas(s, 4);
809 s->periodic_timer = qemu_new_timer_ns(vm_clock, rc4030_periodic_timer, s);
810 s->timer_irq = timer;
811 s->jazz_bus_irq = jazz_bus;
813 qemu_register_reset(rc4030_reset, s);
814 register_savevm(NULL, "rc4030", 0, 2, rc4030_save, rc4030_load, s);
815 rc4030_reset(s);
817 memory_region_init_io(&s->iomem_chipset, &rc4030_ops, s,
818 "rc4030.chipset", 0x300);
819 memory_region_add_subregion(sysmem, 0x80000000, &s->iomem_chipset);
820 memory_region_init_io(&s->iomem_jazzio, &jazzio_ops, s,
821 "rc4030.jazzio", 0x00001000);
822 memory_region_add_subregion(sysmem, 0xf0000000, &s->iomem_jazzio);
824 return s;