target-i386: Add API to get note's size
[qemu/ar7.git] / hw / pl061.c
blob2aac7e8e9ee4529d072f2847115f42265afe6bc0
1 /*
2 * Arm PrimeCell PL061 General Purpose IO with additional
3 * Luminary Micro Stellaris bits.
5 * Copyright (c) 2007 CodeSourcery.
6 * Written by Paul Brook
8 * This code is licensed under the GPL.
9 */
11 #include "sysbus.h"
13 //#define DEBUG_PL061 1
15 #ifdef DEBUG_PL061
16 #define DPRINTF(fmt, ...) \
17 do { printf("pl061: " fmt , ## __VA_ARGS__); } while (0)
18 #define BADF(fmt, ...) \
19 do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
20 #else
21 #define DPRINTF(fmt, ...) do {} while(0)
22 #define BADF(fmt, ...) \
23 do { fprintf(stderr, "pl061: error: " fmt , ## __VA_ARGS__);} while (0)
24 #endif
26 static const uint8_t pl061_id[12] =
27 { 0x00, 0x00, 0x00, 0x00, 0x61, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
28 static const uint8_t pl061_id_luminary[12] =
29 { 0x00, 0x00, 0x00, 0x00, 0x61, 0x00, 0x18, 0x01, 0x0d, 0xf0, 0x05, 0xb1 };
31 typedef struct {
32 SysBusDevice busdev;
33 MemoryRegion iomem;
34 uint32_t locked;
35 uint32_t data;
36 uint32_t old_data;
37 uint32_t dir;
38 uint32_t isense;
39 uint32_t ibe;
40 uint32_t iev;
41 uint32_t im;
42 uint32_t istate;
43 uint32_t afsel;
44 uint32_t dr2r;
45 uint32_t dr4r;
46 uint32_t dr8r;
47 uint32_t odr;
48 uint32_t pur;
49 uint32_t pdr;
50 uint32_t slr;
51 uint32_t den;
52 uint32_t cr;
53 uint32_t float_high;
54 uint32_t amsel;
55 qemu_irq irq;
56 qemu_irq out[8];
57 const unsigned char *id;
58 } pl061_state;
60 static const VMStateDescription vmstate_pl061 = {
61 .name = "pl061",
62 .version_id = 2,
63 .minimum_version_id = 1,
64 .fields = (VMStateField[]) {
65 VMSTATE_UINT32(locked, pl061_state),
66 VMSTATE_UINT32(data, pl061_state),
67 VMSTATE_UINT32(old_data, pl061_state),
68 VMSTATE_UINT32(dir, pl061_state),
69 VMSTATE_UINT32(isense, pl061_state),
70 VMSTATE_UINT32(ibe, pl061_state),
71 VMSTATE_UINT32(iev, pl061_state),
72 VMSTATE_UINT32(im, pl061_state),
73 VMSTATE_UINT32(istate, pl061_state),
74 VMSTATE_UINT32(afsel, pl061_state),
75 VMSTATE_UINT32(dr2r, pl061_state),
76 VMSTATE_UINT32(dr4r, pl061_state),
77 VMSTATE_UINT32(dr8r, pl061_state),
78 VMSTATE_UINT32(odr, pl061_state),
79 VMSTATE_UINT32(pur, pl061_state),
80 VMSTATE_UINT32(pdr, pl061_state),
81 VMSTATE_UINT32(slr, pl061_state),
82 VMSTATE_UINT32(den, pl061_state),
83 VMSTATE_UINT32(cr, pl061_state),
84 VMSTATE_UINT32(float_high, pl061_state),
85 VMSTATE_UINT32_V(amsel, pl061_state, 2),
86 VMSTATE_END_OF_LIST()
90 static void pl061_update(pl061_state *s)
92 uint8_t changed;
93 uint8_t mask;
94 uint8_t out;
95 int i;
97 /* Outputs float high. */
98 /* FIXME: This is board dependent. */
99 out = (s->data & s->dir) | ~s->dir;
100 changed = s->old_data ^ out;
101 if (!changed)
102 return;
104 s->old_data = out;
105 for (i = 0; i < 8; i++) {
106 mask = 1 << i;
107 if (changed & mask) {
108 DPRINTF("Set output %d = %d\n", i, (out & mask) != 0);
109 qemu_set_irq(s->out[i], (out & mask) != 0);
113 /* FIXME: Implement input interrupts. */
116 static uint64_t pl061_read(void *opaque, target_phys_addr_t offset,
117 unsigned size)
119 pl061_state *s = (pl061_state *)opaque;
121 if (offset >= 0xfd0 && offset < 0x1000) {
122 return s->id[(offset - 0xfd0) >> 2];
124 if (offset < 0x400) {
125 return s->data & (offset >> 2);
127 switch (offset) {
128 case 0x400: /* Direction */
129 return s->dir;
130 case 0x404: /* Interrupt sense */
131 return s->isense;
132 case 0x408: /* Interrupt both edges */
133 return s->ibe;
134 case 0x40c: /* Interrupt event */
135 return s->iev;
136 case 0x410: /* Interrupt mask */
137 return s->im;
138 case 0x414: /* Raw interrupt status */
139 return s->istate;
140 case 0x418: /* Masked interrupt status */
141 return s->istate | s->im;
142 case 0x420: /* Alternate function select */
143 return s->afsel;
144 case 0x500: /* 2mA drive */
145 return s->dr2r;
146 case 0x504: /* 4mA drive */
147 return s->dr4r;
148 case 0x508: /* 8mA drive */
149 return s->dr8r;
150 case 0x50c: /* Open drain */
151 return s->odr;
152 case 0x510: /* Pull-up */
153 return s->pur;
154 case 0x514: /* Pull-down */
155 return s->pdr;
156 case 0x518: /* Slew rate control */
157 return s->slr;
158 case 0x51c: /* Digital enable */
159 return s->den;
160 case 0x520: /* Lock */
161 return s->locked;
162 case 0x524: /* Commit */
163 return s->cr;
164 case 0x528: /* Analog mode select */
165 return s->amsel;
166 default:
167 hw_error("pl061_read: Bad offset %x\n", (int)offset);
168 return 0;
172 static void pl061_write(void *opaque, target_phys_addr_t offset,
173 uint64_t value, unsigned size)
175 pl061_state *s = (pl061_state *)opaque;
176 uint8_t mask;
178 if (offset < 0x400) {
179 mask = (offset >> 2) & s->dir;
180 s->data = (s->data & ~mask) | (value & mask);
181 pl061_update(s);
182 return;
184 switch (offset) {
185 case 0x400: /* Direction */
186 s->dir = value & 0xff;
187 break;
188 case 0x404: /* Interrupt sense */
189 s->isense = value & 0xff;
190 break;
191 case 0x408: /* Interrupt both edges */
192 s->ibe = value & 0xff;
193 break;
194 case 0x40c: /* Interrupt event */
195 s->iev = value & 0xff;
196 break;
197 case 0x410: /* Interrupt mask */
198 s->im = value & 0xff;
199 break;
200 case 0x41c: /* Interrupt clear */
201 s->istate &= ~value;
202 break;
203 case 0x420: /* Alternate function select */
204 mask = s->cr;
205 s->afsel = (s->afsel & ~mask) | (value & mask);
206 break;
207 case 0x500: /* 2mA drive */
208 s->dr2r = value & 0xff;
209 break;
210 case 0x504: /* 4mA drive */
211 s->dr4r = value & 0xff;
212 break;
213 case 0x508: /* 8mA drive */
214 s->dr8r = value & 0xff;
215 break;
216 case 0x50c: /* Open drain */
217 s->odr = value & 0xff;
218 break;
219 case 0x510: /* Pull-up */
220 s->pur = value & 0xff;
221 break;
222 case 0x514: /* Pull-down */
223 s->pdr = value & 0xff;
224 break;
225 case 0x518: /* Slew rate control */
226 s->slr = value & 0xff;
227 break;
228 case 0x51c: /* Digital enable */
229 s->den = value & 0xff;
230 break;
231 case 0x520: /* Lock */
232 s->locked = (value != 0xacce551);
233 break;
234 case 0x524: /* Commit */
235 if (!s->locked)
236 s->cr = value & 0xff;
237 break;
238 case 0x528:
239 s->amsel = value & 0xff;
240 break;
241 default:
242 hw_error("pl061_write: Bad offset %x\n", (int)offset);
244 pl061_update(s);
247 static void pl061_reset(pl061_state *s)
249 s->locked = 1;
250 s->cr = 0xff;
253 static void pl061_set_irq(void * opaque, int irq, int level)
255 pl061_state *s = (pl061_state *)opaque;
256 uint8_t mask;
258 mask = 1 << irq;
259 if ((s->dir & mask) == 0) {
260 s->data &= ~mask;
261 if (level)
262 s->data |= mask;
263 pl061_update(s);
267 static const MemoryRegionOps pl061_ops = {
268 .read = pl061_read,
269 .write = pl061_write,
270 .endianness = DEVICE_NATIVE_ENDIAN,
273 static int pl061_init(SysBusDevice *dev, const unsigned char *id)
275 pl061_state *s = FROM_SYSBUS(pl061_state, dev);
276 s->id = id;
277 memory_region_init_io(&s->iomem, &pl061_ops, s, "pl061", 0x1000);
278 sysbus_init_mmio(dev, &s->iomem);
279 sysbus_init_irq(dev, &s->irq);
280 qdev_init_gpio_in(&dev->qdev, pl061_set_irq, 8);
281 qdev_init_gpio_out(&dev->qdev, s->out, 8);
282 pl061_reset(s);
283 return 0;
286 static int pl061_init_luminary(SysBusDevice *dev)
288 return pl061_init(dev, pl061_id_luminary);
291 static int pl061_init_arm(SysBusDevice *dev)
293 return pl061_init(dev, pl061_id);
296 static void pl061_class_init(ObjectClass *klass, void *data)
298 DeviceClass *dc = DEVICE_CLASS(klass);
299 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
301 k->init = pl061_init_arm;
302 dc->vmsd = &vmstate_pl061;
305 static TypeInfo pl061_info = {
306 .name = "pl061",
307 .parent = TYPE_SYS_BUS_DEVICE,
308 .instance_size = sizeof(pl061_state),
309 .class_init = pl061_class_init,
312 static void pl061_luminary_class_init(ObjectClass *klass, void *data)
314 DeviceClass *dc = DEVICE_CLASS(klass);
315 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
317 k->init = pl061_init_luminary;
318 dc->vmsd = &vmstate_pl061;
321 static TypeInfo pl061_luminary_info = {
322 .name = "pl061_luminary",
323 .parent = TYPE_SYS_BUS_DEVICE,
324 .instance_size = sizeof(pl061_state),
325 .class_init = pl061_luminary_class_init,
328 static void pl061_register_types(void)
330 type_register_static(&pl061_info);
331 type_register_static(&pl061_luminary_info);
334 type_init(pl061_register_types)