hw/pckbd.c

   1 /*
   2  * QEMU PC keyboard emulation
   3  *
   4  * Copyright (c) 2003 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24 #include "hw.h"
  25 #include "isa.h"
  26 #include "pc.h"
  27 #include "ps2.h"
  28 #include "sysemu.h"
  29
  30 /* debug PC keyboard */
  31 //#define DEBUG_KBD
  32 #ifdef DEBUG_KBD
  33 #define DPRINTF(fmt, ...)                                       \
  34     do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0)
  35 #else
  36 #define DPRINTF(fmt, ...)
  37 #endif
  38
  39 /*      Keyboard Controller Commands */
  40 #define KBD_CCMD_READ_MODE      0x20    /* Read mode bits */
  41 #define KBD_CCMD_WRITE_MODE     0x60    /* Write mode bits */
  42 #define KBD_CCMD_GET_VERSION    0xA1    /* Get controller version */
  43 #define KBD_CCMD_MOUSE_DISABLE  0xA7    /* Disable mouse interface */
  44 #define KBD_CCMD_MOUSE_ENABLE   0xA8    /* Enable mouse interface */
  45 #define KBD_CCMD_TEST_MOUSE     0xA9    /* Mouse interface test */
  46 #define KBD_CCMD_SELF_TEST      0xAA    /* Controller self test */
  47 #define KBD_CCMD_KBD_TEST       0xAB    /* Keyboard interface test */
  48 #define KBD_CCMD_KBD_DISABLE    0xAD    /* Keyboard interface disable */
  49 #define KBD_CCMD_KBD_ENABLE     0xAE    /* Keyboard interface enable */
  50 #define KBD_CCMD_READ_INPORT    0xC0    /* read input port */
  51 #define KBD_CCMD_READ_OUTPORT   0xD0    /* read output port */
  52 #define KBD_CCMD_WRITE_OUTPORT  0xD1    /* write output port */
  53 #define KBD_CCMD_WRITE_OBUF     0xD2
  54 #define KBD_CCMD_WRITE_AUX_OBUF 0xD3    /* Write to output buffer as if
  55                                            initiated by the auxiliary device */
  56 #define KBD_CCMD_WRITE_MOUSE    0xD4    /* Write the following byte to the mouse */
  57 #define KBD_CCMD_DISABLE_A20    0xDD    /* HP vectra only ? */
  58 #define KBD_CCMD_ENABLE_A20     0xDF    /* HP vectra only ? */
  59 #define KBD_CCMD_PULSE_BITS_3_0 0xF0    /* Pulse bits 3-0 of the output port P2. */
  60 #define KBD_CCMD_RESET          0xFE    /* Pulse bit 0 of the output port P2 = CPU reset. */
  61 #define KBD_CCMD_NO_OP          0xFF    /* Pulse no bits of the output port P2. */
  62
  63 /* Keyboard Commands */
  64 #define KBD_CMD_SET_LEDS        0xED    /* Set keyboard leds */
  65 #define KBD_CMD_ECHO            0xEE
  66 #define KBD_CMD_GET_ID          0xF2    /* get keyboard ID */
  67 #define KBD_CMD_SET_RATE        0xF3    /* Set typematic rate */
  68 #define KBD_CMD_ENABLE          0xF4    /* Enable scanning */
  69 #define KBD_CMD_RESET_DISABLE   0xF5    /* reset and disable scanning */
  70 #define KBD_CMD_RESET_ENABLE    0xF6    /* reset and enable scanning */
  71 #define KBD_CMD_RESET           0xFF    /* Reset */
  72
  73 /* Keyboard Replies */
  74 #define KBD_REPLY_POR           0xAA    /* Power on reset */
  75 #define KBD_REPLY_ACK           0xFA    /* Command ACK */
  76 #define KBD_REPLY_RESEND        0xFE    /* Command NACK, send the cmd again */
  77
  78 /* Status Register Bits */
  79 #define KBD_STAT_OBF            0x01    /* Keyboard output buffer full */
  80 #define KBD_STAT_IBF            0x02    /* Keyboard input buffer full */
  81 #define KBD_STAT_SELFTEST       0x04    /* Self test successful */
  82 #define KBD_STAT_CMD            0x08    /* Last write was a command write (0=data) */
  83 #define KBD_STAT_UNLOCKED       0x10    /* Zero if keyboard locked */
  84 #define KBD_STAT_MOUSE_OBF      0x20    /* Mouse output buffer full */
  85 #define KBD_STAT_GTO            0x40    /* General receive/xmit timeout */
  86 #define KBD_STAT_PERR           0x80    /* Parity error */
  87
  88 /* Controller Mode Register Bits */
  89 #define KBD_MODE_KBD_INT        0x01    /* Keyboard data generate IRQ1 */
  90 #define KBD_MODE_MOUSE_INT      0x02    /* Mouse data generate IRQ12 */
  91 #define KBD_MODE_SYS            0x04    /* The system flag (?) */
  92 #define KBD_MODE_NO_KEYLOCK     0x08    /* The keylock doesn't affect the keyboard if set */
  93 #define KBD_MODE_DISABLE_KBD    0x10    /* Disable keyboard interface */
  94 #define KBD_MODE_DISABLE_MOUSE  0x20    /* Disable mouse interface */
  95 #define KBD_MODE_KCC            0x40    /* Scan code conversion to PC format */
  96 #define KBD_MODE_RFU            0x80
  97
  98 /* Output Port Bits */
  99 #define KBD_OUT_RESET           0x01    /* 1=normal mode, 0=reset */
 100 #define KBD_OUT_A20             0x02    /* x86 only */
 101 #define KBD_OUT_OBF             0x10    /* Keyboard output buffer full */
 102 #define KBD_OUT_MOUSE_OBF       0x20    /* Mouse output buffer full */
 103
 104 /* Mouse Commands */
 105 #define AUX_SET_SCALE11         0xE6    /* Set 1:1 scaling */
 106 #define AUX_SET_SCALE21         0xE7    /* Set 2:1 scaling */
 107 #define AUX_SET_RES             0xE8    /* Set resolution */
 108 #define AUX_GET_SCALE           0xE9    /* Get scaling factor */
 109 #define AUX_SET_STREAM          0xEA    /* Set stream mode */
 110 #define AUX_POLL                0xEB    /* Poll */
 111 #define AUX_RESET_WRAP          0xEC    /* Reset wrap mode */
 112 #define AUX_SET_WRAP            0xEE    /* Set wrap mode */
 113 #define AUX_SET_REMOTE          0xF0    /* Set remote mode */
 114 #define AUX_GET_TYPE            0xF2    /* Get type */
 115 #define AUX_SET_SAMPLE          0xF3    /* Set sample rate */
 116 #define AUX_ENABLE_DEV          0xF4    /* Enable aux device */
 117 #define AUX_DISABLE_DEV         0xF5    /* Disable aux device */
 118 #define AUX_SET_DEFAULT         0xF6
 119 #define AUX_RESET               0xFF    /* Reset aux device */
 120 #define AUX_ACK                 0xFA    /* Command byte ACK. */
 121
 122 #define MOUSE_STATUS_REMOTE     0x40
 123 #define MOUSE_STATUS_ENABLED    0x20
 124 #define MOUSE_STATUS_SCALE21    0x10
 125
 126 #define KBD_PENDING_KBD         1
 127 #define KBD_PENDING_AUX         2
 128
 129 typedef struct KBDState {
 130     uint8_t write_cmd; /* if non zero, write data to port 60 is expected */
 131     uint8_t status;
 132     uint8_t mode;
 133     uint8_t outport;
 134     /* Bitmask of devices with data available.  */
 135     uint8_t pending;
 136     void *kbd;
 137     void *mouse;
 138
 139     qemu_irq irq_kbd;
 140     qemu_irq irq_mouse;
 141     qemu_irq *a20_out;
 142     target_phys_addr_t mask;
 143 } KBDState;
 144
 145 /* update irq and KBD_STAT_[MOUSE_]OBF */
 146 /* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
 147    incorrect, but it avoids having to simulate exact delays */
 148 static void kbd_update_irq(KBDState *s)
 149 {
 150     int irq_kbd_level, irq_mouse_level;
 151
 152     irq_kbd_level = 0;
 153     irq_mouse_level = 0;
 154     s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF);
 155     s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF);
 156     if (s->pending) {
 157         s->status |= KBD_STAT_OBF;
 158         s->outport |= KBD_OUT_OBF;
 159         /* kbd data takes priority over aux data.  */
 160         if (s->pending == KBD_PENDING_AUX) {
 161             s->status |= KBD_STAT_MOUSE_OBF;
 162             s->outport |= KBD_OUT_MOUSE_OBF;
 163             if (s->mode & KBD_MODE_MOUSE_INT)
 164                 irq_mouse_level = 1;
 165         } else {
 166             if ((s->mode & KBD_MODE_KBD_INT) &&
 167                 !(s->mode & KBD_MODE_DISABLE_KBD))
 168                 irq_kbd_level = 1;
 169         }
 170     }
 171     qemu_set_irq(s->irq_kbd, irq_kbd_level);
 172     qemu_set_irq(s->irq_mouse, irq_mouse_level);
 173 }
 174
 175 static void kbd_update_kbd_irq(void *opaque, int level)
 176 {
 177     KBDState *s = (KBDState *)opaque;
 178
 179     if (level)
 180         s->pending |= KBD_PENDING_KBD;
 181     else
 182         s->pending &= ~KBD_PENDING_KBD;
 183     kbd_update_irq(s);
 184 }
 185
 186 static void kbd_update_aux_irq(void *opaque, int level)
 187 {
 188     KBDState *s = (KBDState *)opaque;
 189
 190     if (level)
 191         s->pending |= KBD_PENDING_AUX;
 192     else
 193         s->pending &= ~KBD_PENDING_AUX;
 194     kbd_update_irq(s);
 195 }
 196
 197 static uint32_t kbd_read_status(void *opaque, uint32_t addr)
 198 {
 199     KBDState *s = opaque;
 200     int val;
 201     val = s->status;
 202     DPRINTF("kbd: read status=0x%02x\n", val);
 203     return val;
 204 }
 205
 206 static void kbd_queue(KBDState *s, int b, int aux)
 207 {
 208     if (aux)
 209         ps2_queue(s->mouse, b);
 210     else
 211         ps2_queue(s->kbd, b);
 212 }
 213
 214 static void outport_write(KBDState *s, uint32_t val)
 215 {
 216     DPRINTF("kbd: write outport=0x%02x\n", val);
 217     s->outport = val;
 218     if (s->a20_out) {
 219         qemu_set_irq(*s->a20_out, (val >> 1) & 1);
 220     }
 221     if (!(val & 1)) {
 222         qemu_system_reset_request();
 223     }
 224 }
 225
 226 static void kbd_write_command(void *opaque, uint32_t addr, uint32_t val)
 227 {
 228     KBDState *s = opaque;
 229
 230     DPRINTF("kbd: write cmd=0x%02x\n", val);
 231
 232     /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed
 233      * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE
 234      * command specify the output port bits to be pulsed.
 235      * 0: Bit should be pulsed. 1: Bit should not be modified.
 236      * The only useful version of this command is pulsing bit 0,
 237      * which does a CPU reset.
 238      */
 239     if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) {
 240         if(!(val & 1))
 241             val = KBD_CCMD_RESET;
 242         else
 243             val = KBD_CCMD_NO_OP;
 244     }
 245
 246     switch(val) {
 247     case KBD_CCMD_READ_MODE:
 248         kbd_queue(s, s->mode, 0);
 249         break;
 250     case KBD_CCMD_WRITE_MODE:
 251     case KBD_CCMD_WRITE_OBUF:
 252     case KBD_CCMD_WRITE_AUX_OBUF:
 253     case KBD_CCMD_WRITE_MOUSE:
 254     case KBD_CCMD_WRITE_OUTPORT:
 255         s->write_cmd = val;
 256         break;
 257     case KBD_CCMD_MOUSE_DISABLE:
 258         s->mode |= KBD_MODE_DISABLE_MOUSE;
 259         break;
 260     case KBD_CCMD_MOUSE_ENABLE:
 261         s->mode &= ~KBD_MODE_DISABLE_MOUSE;
 262         break;
 263     case KBD_CCMD_TEST_MOUSE:
 264         kbd_queue(s, 0x00, 0);
 265         break;
 266     case KBD_CCMD_SELF_TEST:
 267         s->status |= KBD_STAT_SELFTEST;
 268         kbd_queue(s, 0x55, 0);
 269         break;
 270     case KBD_CCMD_KBD_TEST:
 271         kbd_queue(s, 0x00, 0);
 272         break;
 273     case KBD_CCMD_KBD_DISABLE:
 274         s->mode |= KBD_MODE_DISABLE_KBD;
 275         kbd_update_irq(s);
 276         break;
 277     case KBD_CCMD_KBD_ENABLE:
 278         s->mode &= ~KBD_MODE_DISABLE_KBD;
 279         kbd_update_irq(s);
 280         break;
 281     case KBD_CCMD_READ_INPORT:
 282         kbd_queue(s, 0x00, 0);
 283         break;
 284     case KBD_CCMD_READ_OUTPORT:
 285         kbd_queue(s, s->outport, 0);
 286         break;
 287     case KBD_CCMD_ENABLE_A20:
 288         if (s->a20_out) {
 289             qemu_irq_raise(*s->a20_out);
 290         }
 291         s->outport |= KBD_OUT_A20;
 292         break;
 293     case KBD_CCMD_DISABLE_A20:
 294         if (s->a20_out) {
 295             qemu_irq_lower(*s->a20_out);
 296         }
 297         s->outport &= ~KBD_OUT_A20;
 298         break;
 299     case KBD_CCMD_RESET:
 300         qemu_system_reset_request();
 301         break;
 302     case KBD_CCMD_NO_OP:
 303         /* ignore that */
 304         break;
 305     default:
 306         fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", val);
 307         break;
 308     }
 309 }
 310
 311 static uint32_t kbd_read_data(void *opaque, uint32_t addr)
 312 {
 313     KBDState *s = opaque;
 314     uint32_t val;
 315
 316     if (s->pending == KBD_PENDING_AUX)
 317         val = ps2_read_data(s->mouse);
 318     else
 319         val = ps2_read_data(s->kbd);
 320
 321     DPRINTF("kbd: read data=0x%02x\n", val);
 322     return val;
 323 }
 324
 325 static void kbd_write_data(void *opaque, uint32_t addr, uint32_t val)
 326 {
 327     KBDState *s = opaque;
 328
 329     DPRINTF("kbd: write data=0x%02x\n", val);
 330
 331     switch(s->write_cmd) {
 332     case 0:
 333         ps2_write_keyboard(s->kbd, val);
 334         break;
 335     case KBD_CCMD_WRITE_MODE:
 336         s->mode = val;
 337         ps2_keyboard_set_translation(s->kbd, (s->mode & KBD_MODE_KCC) != 0);
 338         /* ??? */
 339         kbd_update_irq(s);
 340         break;
 341     case KBD_CCMD_WRITE_OBUF:
 342         kbd_queue(s, val, 0);
 343         break;
 344     case KBD_CCMD_WRITE_AUX_OBUF:
 345         kbd_queue(s, val, 1);
 346         break;
 347     case KBD_CCMD_WRITE_OUTPORT:
 348         outport_write(s, val);
 349         break;
 350     case KBD_CCMD_WRITE_MOUSE:
 351         ps2_write_mouse(s->mouse, val);
 352         break;
 353     default:
 354         break;
 355     }
 356     s->write_cmd = 0;
 357 }
 358
 359 static void kbd_reset(void *opaque)
 360 {
 361     KBDState *s = opaque;
 362
 363     s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT;
 364     s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED;
 365     s->outport = KBD_OUT_RESET | KBD_OUT_A20;
 366 }
 367
 368 static const VMStateDescription vmstate_kbd = {
 369     .name = "pckbd",
 370     .version_id = 3,
 371     .minimum_version_id = 3,
 372     .minimum_version_id_old = 3,
 373     .fields      = (VMStateField []) {
 374         VMSTATE_UINT8(write_cmd, KBDState),
 375         VMSTATE_UINT8(status, KBDState),
 376         VMSTATE_UINT8(mode, KBDState),
 377         VMSTATE_UINT8(pending, KBDState),
 378         VMSTATE_END_OF_LIST()
 379     }
 380 };
 381
 382 /* Memory mapped interface */
 383 static uint32_t kbd_mm_readb (void *opaque, target_phys_addr_t addr)
 384 {
 385     KBDState *s = opaque;
 386
 387     if (addr & s->mask)
 388         return kbd_read_status(s, 0) & 0xff;
 389     else
 390         return kbd_read_data(s, 0) & 0xff;
 391 }
 392
 393 static void kbd_mm_writeb (void *opaque, target_phys_addr_t addr, uint32_t value)
 394 {
 395     KBDState *s = opaque;
 396
 397     if (addr & s->mask)
 398         kbd_write_command(s, 0, value & 0xff);
 399     else
 400         kbd_write_data(s, 0, value & 0xff);
 401 }
 402
 403 static const MemoryRegionOps i8042_mmio_ops = {
 404     .endianness = DEVICE_NATIVE_ENDIAN,
 405     .old_mmio = {
 406         .read = { kbd_mm_readb, kbd_mm_readb, kbd_mm_readb },
 407         .write = { kbd_mm_writeb, kbd_mm_writeb, kbd_mm_writeb },
 408     },
 409 };
 410
 411 void i8042_mm_init(qemu_irq kbd_irq, qemu_irq mouse_irq,
 412                    MemoryRegion *region, ram_addr_t size,
 413                    target_phys_addr_t mask)
 414 {
 415     KBDState *s = g_malloc0(sizeof(KBDState));
 416
 417     s->irq_kbd = kbd_irq;
 418     s->irq_mouse = mouse_irq;
 419     s->mask = mask;
 420
 421     vmstate_register(NULL, 0, &vmstate_kbd, s);
 422
 423     memory_region_init_io(region, &i8042_mmio_ops, s, "i8042", size);
 424
 425     s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
 426     s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
 427     qemu_register_reset(kbd_reset, s);
 428 }
 429
 430 typedef struct ISAKBDState {
 431     ISADevice dev;
 432     KBDState kbd;
 433     MemoryRegion io[2];
 434 } ISAKBDState;
 435
 436 void i8042_isa_mouse_fake_event(void *opaque)
 437 {
 438     ISADevice *dev = opaque;
 439     KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
 440
 441     ps2_mouse_fake_event(s->mouse);
 442 }
 443
 444 void i8042_setup_a20_line(ISADevice *dev, qemu_irq *a20_out)
 445 {
 446     KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
 447
 448     s->a20_out = a20_out;
 449 }
 450
 451 static const VMStateDescription vmstate_kbd_isa = {
 452     .name = "pckbd",
 453     .version_id = 3,
 454     .minimum_version_id = 3,
 455     .minimum_version_id_old = 3,
 456     .fields      = (VMStateField []) {
 457         VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState),
 458         VMSTATE_END_OF_LIST()
 459     }
 460 };
 461
 462 static const MemoryRegionPortio i8042_data_portio[] = {
 463     { 0, 1, 1, .read = kbd_read_data, .write = kbd_write_data },
 464     PORTIO_END_OF_LIST()
 465 };
 466
 467 static const MemoryRegionPortio i8042_cmd_portio[] = {
 468     { 0, 1, 1, .read = kbd_read_status, .write = kbd_write_command },
 469     PORTIO_END_OF_LIST()
 470 };
 471
 472 static const MemoryRegionOps i8042_data_ops = {
 473     .old_portio = i8042_data_portio
 474 };
 475
 476 static const MemoryRegionOps i8042_cmd_ops = {
 477     .old_portio = i8042_cmd_portio
 478 };
 479
 480 static int i8042_initfn(ISADevice *dev)
 481 {
 482     ISAKBDState *isa_s = DO_UPCAST(ISAKBDState, dev, dev);
 483     KBDState *s = &isa_s->kbd;
 484
 485     isa_init_irq(dev, &s->irq_kbd, 1);
 486     isa_init_irq(dev, &s->irq_mouse, 12);
 487
 488     memory_region_init_io(isa_s->io + 0, &i8042_data_ops, s, "i8042-data", 1);
 489     isa_register_ioport(dev, isa_s->io + 0, 0x60);
 490
 491     memory_region_init_io(isa_s->io + 1, &i8042_cmd_ops, s, "i8042-cmd", 1);
 492     isa_register_ioport(dev, isa_s->io + 1, 0x64);
 493
 494     s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
 495     s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
 496     qemu_register_reset(kbd_reset, s);
 497     return 0;
 498 }
 499
 500 static void i8042_class_initfn(ObjectClass *klass, void *data)
 501 {
 502     DeviceClass *dc = DEVICE_CLASS(klass);
 503     ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
 504     ic->init = i8042_initfn;
 505     dc->no_user = 1;
 506     dc->vmsd = &vmstate_kbd_isa;
 507 }
 508
 509 static TypeInfo i8042_info = {
 510     .name          = "i8042",
 511     .parent        = TYPE_ISA_DEVICE,
 512     .instance_size = sizeof(ISAKBDState),
 513     .class_init    = i8042_class_initfn,
 514 };
 515
 516 static void i8042_register_types(void)
 517 {
 518     type_register_static(&i8042_info);
 519 }
 520
 521 type_init(i8042_register_types)