hw/arm_timer.c

   1 /*
   2  * ARM PrimeCell Timer modules.
   3  *
   4  * Copyright (c) 2005-2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licensed under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11 #include "qemu-timer.h"
  12 #include "qemu-common.h"
  13 #include "qdev.h"
  14 #include "ptimer.h"
  15
  16 /* Common timer implementation.  */
  17
  18 #define TIMER_CTRL_ONESHOT      (1 << 0)
  19 #define TIMER_CTRL_32BIT        (1 << 1)
  20 #define TIMER_CTRL_DIV1         (0 << 2)
  21 #define TIMER_CTRL_DIV16        (1 << 2)
  22 #define TIMER_CTRL_DIV256       (2 << 2)
  23 #define TIMER_CTRL_IE           (1 << 5)
  24 #define TIMER_CTRL_PERIODIC     (1 << 6)
  25 #define TIMER_CTRL_ENABLE       (1 << 7)
  26
  27 typedef struct {
  28     ptimer_state *timer;
  29     uint32_t control;
  30     uint32_t limit;
  31     int freq;
  32     int int_level;
  33     qemu_irq irq;
  34 } arm_timer_state;
  35
  36 /* Check all active timers, and schedule the next timer interrupt.  */
  37
  38 static void arm_timer_update(arm_timer_state *s)
  39 {
  40     /* Update interrupts.  */
  41     if (s->int_level && (s->control & TIMER_CTRL_IE)) {
  42         qemu_irq_raise(s->irq);
  43     } else {
  44         qemu_irq_lower(s->irq);
  45     }
  46 }
  47
  48 static uint32_t arm_timer_read(void *opaque, target_phys_addr_t offset)
  49 {
  50     arm_timer_state *s = (arm_timer_state *)opaque;
  51
  52     switch (offset >> 2) {
  53     case 0: /* TimerLoad */
  54     case 6: /* TimerBGLoad */
  55         return s->limit;
  56     case 1: /* TimerValue */
  57         return ptimer_get_count(s->timer);
  58     case 2: /* TimerControl */
  59         return s->control;
  60     case 4: /* TimerRIS */
  61         return s->int_level;
  62     case 5: /* TimerMIS */
  63         if ((s->control & TIMER_CTRL_IE) == 0)
  64             return 0;
  65         return s->int_level;
  66     default:
  67         hw_error("%s: Bad offset %x\n", __func__, (int)offset);
  68         return 0;
  69     }
  70 }
  71
  72 /* Reset the timer limit after settings have changed.  */
  73 static void arm_timer_recalibrate(arm_timer_state *s, int reload)
  74 {
  75     uint32_t limit;
  76
  77     if ((s->control & (TIMER_CTRL_PERIODIC | TIMER_CTRL_ONESHOT)) == 0) {
  78         /* Free running.  */
  79         if (s->control & TIMER_CTRL_32BIT)
  80             limit = 0xffffffff;
  81         else
  82             limit = 0xffff;
  83     } else {
  84           /* Periodic.  */
  85           limit = s->limit;
  86     }
  87     ptimer_set_limit(s->timer, limit, reload);
  88 }
  89
  90 static void arm_timer_write(void *opaque, target_phys_addr_t offset,
  91                             uint32_t value)
  92 {
  93     arm_timer_state *s = (arm_timer_state *)opaque;
  94     int freq;
  95
  96     switch (offset >> 2) {
  97     case 0: /* TimerLoad */
  98         s->limit = value;
  99         arm_timer_recalibrate(s, 1);
 100         break;
 101     case 1: /* TimerValue */
 102         /* ??? Linux seems to want to write to this readonly register.
 103            Ignore it.  */
 104         break;
 105     case 2: /* TimerControl */
 106         if (s->control & TIMER_CTRL_ENABLE) {
 107             /* Pause the timer if it is running.  This may cause some
 108                inaccuracy dure to rounding, but avoids a whole lot of other
 109                messyness.  */
 110             ptimer_stop(s->timer);
 111         }
 112         s->control = value;
 113         freq = s->freq;
 114         /* ??? Need to recalculate expiry time after changing divisor.  */
 115         switch ((value >> 2) & 3) {
 116         case 1: freq >>= 4; break;
 117         case 2: freq >>= 8; break;
 118         }
 119         arm_timer_recalibrate(s, s->control & TIMER_CTRL_ENABLE);
 120         ptimer_set_freq(s->timer, freq);
 121         if (s->control & TIMER_CTRL_ENABLE) {
 122             /* Restart the timer if still enabled.  */
 123             ptimer_run(s->timer, (s->control & TIMER_CTRL_ONESHOT) != 0);
 124         }
 125         break;
 126     case 3: /* TimerIntClr */
 127         s->int_level = 0;
 128         break;
 129     case 6: /* TimerBGLoad */
 130         s->limit = value;
 131         arm_timer_recalibrate(s, 0);
 132         break;
 133     default:
 134         hw_error("%s: Bad offset %x\n", __func__, (int)offset);
 135     }
 136     arm_timer_update(s);
 137 }
 138
 139 static void arm_timer_tick(void *opaque)
 140 {
 141     arm_timer_state *s = (arm_timer_state *)opaque;
 142     s->int_level = 1;
 143     arm_timer_update(s);
 144 }
 145
 146 static const VMStateDescription vmstate_arm_timer = {
 147     .name = "arm_timer",
 148     .version_id = 1,
 149     .minimum_version_id = 1,
 150     .minimum_version_id_old = 1,
 151     .fields      = (VMStateField[]) {
 152         VMSTATE_UINT32(control, arm_timer_state),
 153         VMSTATE_UINT32(limit, arm_timer_state),
 154         VMSTATE_INT32(int_level, arm_timer_state),
 155         VMSTATE_PTIMER(timer, arm_timer_state),
 156         VMSTATE_END_OF_LIST()
 157     }
 158 };
 159
 160 static arm_timer_state *arm_timer_init(uint32_t freq)
 161 {
 162     arm_timer_state *s;
 163     QEMUBH *bh;
 164
 165     s = (arm_timer_state *)g_malloc0(sizeof(arm_timer_state));
 166     s->freq = freq;
 167     s->control = TIMER_CTRL_IE;
 168
 169     bh = qemu_bh_new(arm_timer_tick, s);
 170     s->timer = ptimer_init(bh);
 171     vmstate_register(NULL, -1, &vmstate_arm_timer, s);
 172     return s;
 173 }
 174
 175 /* ARM PrimeCell SP804 dual timer module.
 176  * Docs at
 177  * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0271d/index.html
 178 */
 179
 180 typedef struct {
 181     SysBusDevice busdev;
 182     MemoryRegion iomem;
 183     arm_timer_state *timer[2];
 184     uint32_t freq0, freq1;
 185     int level[2];
 186     qemu_irq irq;
 187 } sp804_state;
 188
 189 static const uint8_t sp804_ids[] = {
 190     /* Timer ID */
 191     0x04, 0x18, 0x14, 0,
 192     /* PrimeCell ID */
 193     0xd, 0xf0, 0x05, 0xb1
 194 };
 195
 196 /* Merge the IRQs from the two component devices.  */
 197 static void sp804_set_irq(void *opaque, int irq, int level)
 198 {
 199     sp804_state *s = (sp804_state *)opaque;
 200
 201     s->level[irq] = level;
 202     qemu_set_irq(s->irq, s->level[0] || s->level[1]);
 203 }
 204
 205 static uint64_t sp804_read(void *opaque, target_phys_addr_t offset,
 206                            unsigned size)
 207 {
 208     sp804_state *s = (sp804_state *)opaque;
 209
 210     if (offset < 0x20) {
 211         return arm_timer_read(s->timer[0], offset);
 212     }
 213     if (offset < 0x40) {
 214         return arm_timer_read(s->timer[1], offset - 0x20);
 215     }
 216
 217     /* TimerPeriphID */
 218     if (offset >= 0xfe0 && offset <= 0xffc) {
 219         return sp804_ids[(offset - 0xfe0) >> 2];
 220     }
 221
 222     switch (offset) {
 223     /* Integration Test control registers, which we won't support */
 224     case 0xf00: /* TimerITCR */
 225     case 0xf04: /* TimerITOP (strictly write only but..) */
 226         return 0;
 227     }
 228
 229     hw_error("%s: Bad offset %x\n", __func__, (int)offset);
 230     return 0;
 231 }
 232
 233 static void sp804_write(void *opaque, target_phys_addr_t offset,
 234                         uint64_t value, unsigned size)
 235 {
 236     sp804_state *s = (sp804_state *)opaque;
 237
 238     if (offset < 0x20) {
 239         arm_timer_write(s->timer[0], offset, value);
 240         return;
 241     }
 242
 243     if (offset < 0x40) {
 244         arm_timer_write(s->timer[1], offset - 0x20, value);
 245         return;
 246     }
 247
 248     /* Technically we could be writing to the Test Registers, but not likely */
 249     hw_error("%s: Bad offset %x\n", __func__, (int)offset);
 250 }
 251
 252 static const MemoryRegionOps sp804_ops = {
 253     .read = sp804_read,
 254     .write = sp804_write,
 255     .endianness = DEVICE_NATIVE_ENDIAN,
 256 };
 257
 258 static const VMStateDescription vmstate_sp804 = {
 259     .name = "sp804",
 260     .version_id = 1,
 261     .minimum_version_id = 1,
 262     .minimum_version_id_old = 1,
 263     .fields      = (VMStateField[]) {
 264         VMSTATE_INT32_ARRAY(level, sp804_state, 2),
 265         VMSTATE_END_OF_LIST()
 266     }
 267 };
 268
 269 static int sp804_init(SysBusDevice *dev)
 270 {
 271     sp804_state *s = FROM_SYSBUS(sp804_state, dev);
 272     qemu_irq *qi;
 273
 274     qi = qemu_allocate_irqs(sp804_set_irq, s, 2);
 275     sysbus_init_irq(dev, &s->irq);
 276     s->timer[0] = arm_timer_init(s->freq0);
 277     s->timer[1] = arm_timer_init(s->freq1);
 278     s->timer[0]->irq = qi[0];
 279     s->timer[1]->irq = qi[1];
 280     memory_region_init_io(&s->iomem, &sp804_ops, s, "sp804", 0x1000);
 281     sysbus_init_mmio(dev, &s->iomem);
 282     vmstate_register(&dev->qdev, -1, &vmstate_sp804, s);
 283     return 0;
 284 }
 285
 286 /* Integrator/CP timer module.  */
 287
 288 typedef struct {
 289     SysBusDevice busdev;
 290     MemoryRegion iomem;
 291     arm_timer_state *timer[3];
 292 } icp_pit_state;
 293
 294 static uint64_t icp_pit_read(void *opaque, target_phys_addr_t offset,
 295                              unsigned size)
 296 {
 297     icp_pit_state *s = (icp_pit_state *)opaque;
 298     int n;
 299
 300     /* ??? Don't know the PrimeCell ID for this device.  */
 301     n = offset >> 8;
 302     if (n > 2) {
 303         hw_error("%s: Bad timer %d\n", __func__, n);
 304     }
 305
 306     return arm_timer_read(s->timer[n], offset & 0xff);
 307 }
 308
 309 static void icp_pit_write(void *opaque, target_phys_addr_t offset,
 310                           uint64_t value, unsigned size)
 311 {
 312     icp_pit_state *s = (icp_pit_state *)opaque;
 313     int n;
 314
 315     n = offset >> 8;
 316     if (n > 2) {
 317         hw_error("%s: Bad timer %d\n", __func__, n);
 318     }
 319
 320     arm_timer_write(s->timer[n], offset & 0xff, value);
 321 }
 322
 323 static const MemoryRegionOps icp_pit_ops = {
 324     .read = icp_pit_read,
 325     .write = icp_pit_write,
 326     .endianness = DEVICE_NATIVE_ENDIAN,
 327 };
 328
 329 static int icp_pit_init(SysBusDevice *dev)
 330 {
 331     icp_pit_state *s = FROM_SYSBUS(icp_pit_state, dev);
 332
 333     /* Timer 0 runs at the system clock speed (40MHz).  */
 334     s->timer[0] = arm_timer_init(40000000);
 335     /* The other two timers run at 1MHz.  */
 336     s->timer[1] = arm_timer_init(1000000);
 337     s->timer[2] = arm_timer_init(1000000);
 338
 339     sysbus_init_irq(dev, &s->timer[0]->irq);
 340     sysbus_init_irq(dev, &s->timer[1]->irq);
 341     sysbus_init_irq(dev, &s->timer[2]->irq);
 342
 343     memory_region_init_io(&s->iomem, &icp_pit_ops, s, "icp_pit", 0x1000);
 344     sysbus_init_mmio(dev, &s->iomem);
 345     /* This device has no state to save/restore.  The component timers will
 346        save themselves.  */
 347     return 0;
 348 }
 349
 350 static void icp_pit_class_init(ObjectClass *klass, void *data)
 351 {
 352     SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
 353
 354     sdc->init = icp_pit_init;
 355 }
 356
 357 static TypeInfo icp_pit_info = {
 358     .name          = "integrator_pit",
 359     .parent        = TYPE_SYS_BUS_DEVICE,
 360     .instance_size = sizeof(icp_pit_state),
 361     .class_init    = icp_pit_class_init,
 362 };
 363
 364 static Property sp804_properties[] = {
 365     DEFINE_PROP_UINT32("freq0", sp804_state, freq0, 1000000),
 366     DEFINE_PROP_UINT32("freq1", sp804_state, freq1, 1000000),
 367     DEFINE_PROP_END_OF_LIST(),
 368 };
 369
 370 static void sp804_class_init(ObjectClass *klass, void *data)
 371 {
 372     SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
 373     DeviceClass *k = DEVICE_CLASS(klass);
 374
 375     sdc->init = sp804_init;
 376     k->props = sp804_properties;
 377 }
 378
 379 static TypeInfo sp804_info = {
 380     .name          = "sp804",
 381     .parent        = TYPE_SYS_BUS_DEVICE,
 382     .instance_size = sizeof(sp804_state),
 383     .class_init    = sp804_class_init,
 384 };
 385
 386 static void arm_timer_register_types(void)
 387 {
 388     type_register_static(&icp_pit_info);
 389     type_register_static(&sp804_info);
 390 }
 391
 392 type_init(arm_timer_register_types)