hw/qxl: qxl_dirty_surfaces: use uintptr_t
[qemu/agraf.git] / osdep.c
blob3b25297a25ba046e1a6f2c2608ca852d59650398
1 /*
2 * QEMU low level functions
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include <stdlib.h>
25 #include <stdio.h>
26 #include <stdarg.h>
27 #include <stdbool.h>
28 #include <string.h>
29 #include <errno.h>
30 #include <unistd.h>
31 #include <fcntl.h>
33 /* Needed early for CONFIG_BSD etc. */
34 #include "config-host.h"
36 #if defined(CONFIG_MADVISE) || defined(CONFIG_POSIX_MADVISE)
37 #include <sys/mman.h>
38 #endif
40 #ifdef CONFIG_SOLARIS
41 #include <sys/types.h>
42 #include <sys/statvfs.h>
43 /* See MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156) for
44 discussion about Solaris header problems */
45 extern int madvise(caddr_t, size_t, int);
46 #endif
48 #include "qemu-common.h"
49 #include "trace.h"
50 #include "qemu_socket.h"
51 #include "monitor.h"
53 static bool fips_enabled = false;
55 static const char *qemu_version = QEMU_VERSION;
57 int socket_set_cork(int fd, int v)
59 #if defined(SOL_TCP) && defined(TCP_CORK)
60 return setsockopt(fd, SOL_TCP, TCP_CORK, &v, sizeof(v));
61 #else
62 return 0;
63 #endif
66 int qemu_madvise(void *addr, size_t len, int advice)
68 if (advice == QEMU_MADV_INVALID) {
69 errno = EINVAL;
70 return -1;
72 #if defined(CONFIG_MADVISE)
73 return madvise(addr, len, advice);
74 #elif defined(CONFIG_POSIX_MADVISE)
75 return posix_madvise(addr, len, advice);
76 #else
77 errno = EINVAL;
78 return -1;
79 #endif
82 #ifndef _WIN32
84 * Dups an fd and sets the flags
86 static int qemu_dup_flags(int fd, int flags)
88 int ret;
89 int serrno;
90 int dup_flags;
91 int setfl_flags;
93 #ifdef F_DUPFD_CLOEXEC
94 ret = fcntl(fd, F_DUPFD_CLOEXEC, 0);
95 #else
96 ret = dup(fd);
97 if (ret != -1) {
98 qemu_set_cloexec(ret);
100 #endif
101 if (ret == -1) {
102 goto fail;
105 dup_flags = fcntl(ret, F_GETFL);
106 if (dup_flags == -1) {
107 goto fail;
110 if ((flags & O_SYNC) != (dup_flags & O_SYNC)) {
111 errno = EINVAL;
112 goto fail;
115 /* Set/unset flags that we can with fcntl */
116 setfl_flags = O_APPEND | O_ASYNC | O_NONBLOCK;
117 #ifdef O_NOATIME
118 setfl_flags |= O_NOATIME;
119 #endif
120 #ifdef O_DIRECT
121 setfl_flags |= O_DIRECT;
122 #endif
123 dup_flags &= ~setfl_flags;
124 dup_flags |= (flags & setfl_flags);
125 if (fcntl(ret, F_SETFL, dup_flags) == -1) {
126 goto fail;
129 /* Truncate the file in the cases that open() would truncate it */
130 if (flags & O_TRUNC ||
131 ((flags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))) {
132 if (ftruncate(ret, 0) == -1) {
133 goto fail;
137 return ret;
139 fail:
140 serrno = errno;
141 if (ret != -1) {
142 close(ret);
144 errno = serrno;
145 return -1;
147 #endif
150 * Opens a file with FD_CLOEXEC set
152 int qemu_open(const char *name, int flags, ...)
154 int ret;
155 int mode = 0;
157 #ifndef _WIN32
158 const char *fdset_id_str;
160 /* Attempt dup of fd from fd set */
161 if (strstart(name, "/dev/fdset/", &fdset_id_str)) {
162 int64_t fdset_id;
163 int fd, dupfd;
165 fdset_id = qemu_parse_fdset(fdset_id_str);
166 if (fdset_id == -1) {
167 errno = EINVAL;
168 return -1;
171 fd = monitor_fdset_get_fd(fdset_id, flags);
172 if (fd == -1) {
173 return -1;
176 dupfd = qemu_dup_flags(fd, flags);
177 if (dupfd == -1) {
178 return -1;
181 ret = monitor_fdset_dup_fd_add(fdset_id, dupfd);
182 if (ret == -1) {
183 close(dupfd);
184 errno = EINVAL;
185 return -1;
188 return dupfd;
190 #endif
192 if (flags & O_CREAT) {
193 va_list ap;
195 va_start(ap, flags);
196 mode = va_arg(ap, int);
197 va_end(ap);
200 #ifdef O_CLOEXEC
201 ret = open(name, flags | O_CLOEXEC, mode);
202 #else
203 ret = open(name, flags, mode);
204 if (ret >= 0) {
205 qemu_set_cloexec(ret);
207 #endif
209 return ret;
212 int qemu_close(int fd)
214 int64_t fdset_id;
216 /* Close fd that was dup'd from an fdset */
217 fdset_id = monitor_fdset_dup_fd_find(fd);
218 if (fdset_id != -1) {
219 int ret;
221 ret = close(fd);
222 if (ret == 0) {
223 monitor_fdset_dup_fd_remove(fd);
226 return ret;
229 return close(fd);
233 * A variant of write(2) which handles partial write.
235 * Return the number of bytes transferred.
236 * Set errno if fewer than `count' bytes are written.
238 * This function don't work with non-blocking fd's.
239 * Any of the possibilities with non-bloking fd's is bad:
240 * - return a short write (then name is wrong)
241 * - busy wait adding (errno == EAGAIN) to the loop
243 ssize_t qemu_write_full(int fd, const void *buf, size_t count)
245 ssize_t ret = 0;
246 ssize_t total = 0;
248 while (count) {
249 ret = write(fd, buf, count);
250 if (ret < 0) {
251 if (errno == EINTR)
252 continue;
253 break;
256 count -= ret;
257 buf += ret;
258 total += ret;
261 return total;
265 * Opens a socket with FD_CLOEXEC set
267 int qemu_socket(int domain, int type, int protocol)
269 int ret;
271 #ifdef SOCK_CLOEXEC
272 ret = socket(domain, type | SOCK_CLOEXEC, protocol);
273 if (ret != -1 || errno != EINVAL) {
274 return ret;
276 #endif
277 ret = socket(domain, type, protocol);
278 if (ret >= 0) {
279 qemu_set_cloexec(ret);
282 return ret;
286 * Accept a connection and set FD_CLOEXEC
288 int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen)
290 int ret;
292 #ifdef CONFIG_ACCEPT4
293 ret = accept4(s, addr, addrlen, SOCK_CLOEXEC);
294 if (ret != -1 || errno != ENOSYS) {
295 return ret;
297 #endif
298 ret = accept(s, addr, addrlen);
299 if (ret >= 0) {
300 qemu_set_cloexec(ret);
303 return ret;
307 * A variant of send(2) which handles partial write.
309 * Return the number of bytes transferred, which is only
310 * smaller than `count' if there is an error.
312 * This function won't work with non-blocking fd's.
313 * Any of the possibilities with non-bloking fd's is bad:
314 * - return a short write (then name is wrong)
315 * - busy wait adding (errno == EAGAIN) to the loop
317 ssize_t qemu_send_full(int fd, const void *buf, size_t count, int flags)
319 ssize_t ret = 0;
320 ssize_t total = 0;
322 while (count) {
323 ret = send(fd, buf, count, flags);
324 if (ret < 0) {
325 if (errno == EINTR) {
326 continue;
328 break;
331 count -= ret;
332 buf += ret;
333 total += ret;
336 return total;
340 * A variant of recv(2) which handles partial write.
342 * Return the number of bytes transferred, which is only
343 * smaller than `count' if there is an error.
345 * This function won't work with non-blocking fd's.
346 * Any of the possibilities with non-bloking fd's is bad:
347 * - return a short write (then name is wrong)
348 * - busy wait adding (errno == EAGAIN) to the loop
350 ssize_t qemu_recv_full(int fd, void *buf, size_t count, int flags)
352 ssize_t ret = 0;
353 ssize_t total = 0;
355 while (count) {
356 ret = qemu_recv(fd, buf, count, flags);
357 if (ret <= 0) {
358 if (ret < 0 && errno == EINTR) {
359 continue;
361 break;
364 count -= ret;
365 buf += ret;
366 total += ret;
369 return total;
372 void qemu_set_version(const char *version)
374 qemu_version = version;
377 const char *qemu_get_version(void)
379 return qemu_version;
382 void fips_set_state(bool requested)
384 #ifdef __linux__
385 if (requested) {
386 FILE *fds = fopen("/proc/sys/crypto/fips_enabled", "r");
387 if (fds != NULL) {
388 fips_enabled = (fgetc(fds) == '1');
389 fclose(fds);
392 #else
393 fips_enabled = false;
394 #endif /* __linux__ */
396 #ifdef _FIPS_DEBUG
397 fprintf(stderr, "FIPS mode %s (requested %s)\n",
398 (fips_enabled ? "enabled" : "disabled"),
399 (requested ? "enabled" : "disabled"));
400 #endif
403 bool fips_get_state(void)
405 return fips_enabled;