pci_host: Turn into SysBus-derived QOM type
[qemu/agraf.git] / hw / ide / pci.c
blob88c0942e343582a23d7ea3e88b6e5cbbaa5460e5
1 /*
2 * QEMU IDE Emulation: PCI Bus support.
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23 * THE SOFTWARE.
25 #include <hw/hw.h>
26 #include <hw/pc.h>
27 #include <hw/pci.h>
28 #include <hw/isa.h>
29 #include "block.h"
30 #include "dma.h"
32 #include <hw/ide/pci.h>
34 #define BMDMA_PAGE_SIZE 4096
36 static void bmdma_start_dma(IDEDMA *dma, IDEState *s,
37 BlockDriverCompletionFunc *dma_cb)
39 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
41 bm->unit = s->unit;
42 bm->dma_cb = dma_cb;
43 bm->cur_prd_last = 0;
44 bm->cur_prd_addr = 0;
45 bm->cur_prd_len = 0;
46 bm->sector_num = ide_get_sector(s);
47 bm->nsector = s->nsector;
49 if (bm->status & BM_STATUS_DMAING) {
50 bm->dma_cb(bmdma_active_if(bm), 0);
54 /* return 0 if buffer completed */
55 static int bmdma_prepare_buf(IDEDMA *dma, int is_write)
57 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
58 IDEState *s = bmdma_active_if(bm);
59 struct {
60 uint32_t addr;
61 uint32_t size;
62 } prd;
63 int l, len;
65 pci_dma_sglist_init(&s->sg, &bm->pci_dev->dev,
66 s->nsector / (BMDMA_PAGE_SIZE / 512) + 1);
67 s->io_buffer_size = 0;
68 for(;;) {
69 if (bm->cur_prd_len == 0) {
70 /* end of table (with a fail safe of one page) */
71 if (bm->cur_prd_last ||
72 (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE)
73 return s->io_buffer_size != 0;
74 pci_dma_read(&bm->pci_dev->dev, bm->cur_addr, &prd, 8);
75 bm->cur_addr += 8;
76 prd.addr = le32_to_cpu(prd.addr);
77 prd.size = le32_to_cpu(prd.size);
78 len = prd.size & 0xfffe;
79 if (len == 0)
80 len = 0x10000;
81 bm->cur_prd_len = len;
82 bm->cur_prd_addr = prd.addr;
83 bm->cur_prd_last = (prd.size & 0x80000000);
85 l = bm->cur_prd_len;
86 if (l > 0) {
87 qemu_sglist_add(&s->sg, bm->cur_prd_addr, l);
88 bm->cur_prd_addr += l;
89 bm->cur_prd_len -= l;
90 s->io_buffer_size += l;
93 return 1;
96 /* return 0 if buffer completed */
97 static int bmdma_rw_buf(IDEDMA *dma, int is_write)
99 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
100 IDEState *s = bmdma_active_if(bm);
101 struct {
102 uint32_t addr;
103 uint32_t size;
104 } prd;
105 int l, len;
107 for(;;) {
108 l = s->io_buffer_size - s->io_buffer_index;
109 if (l <= 0)
110 break;
111 if (bm->cur_prd_len == 0) {
112 /* end of table (with a fail safe of one page) */
113 if (bm->cur_prd_last ||
114 (bm->cur_addr - bm->addr) >= BMDMA_PAGE_SIZE)
115 return 0;
116 pci_dma_read(&bm->pci_dev->dev, bm->cur_addr, &prd, 8);
117 bm->cur_addr += 8;
118 prd.addr = le32_to_cpu(prd.addr);
119 prd.size = le32_to_cpu(prd.size);
120 len = prd.size & 0xfffe;
121 if (len == 0)
122 len = 0x10000;
123 bm->cur_prd_len = len;
124 bm->cur_prd_addr = prd.addr;
125 bm->cur_prd_last = (prd.size & 0x80000000);
127 if (l > bm->cur_prd_len)
128 l = bm->cur_prd_len;
129 if (l > 0) {
130 if (is_write) {
131 pci_dma_write(&bm->pci_dev->dev, bm->cur_prd_addr,
132 s->io_buffer + s->io_buffer_index, l);
133 } else {
134 pci_dma_read(&bm->pci_dev->dev, bm->cur_prd_addr,
135 s->io_buffer + s->io_buffer_index, l);
137 bm->cur_prd_addr += l;
138 bm->cur_prd_len -= l;
139 s->io_buffer_index += l;
142 return 1;
145 static int bmdma_set_unit(IDEDMA *dma, int unit)
147 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
148 bm->unit = unit;
150 return 0;
153 static int bmdma_add_status(IDEDMA *dma, int status)
155 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
156 bm->status |= status;
158 return 0;
161 static int bmdma_set_inactive(IDEDMA *dma)
163 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
165 bm->status &= ~BM_STATUS_DMAING;
166 bm->dma_cb = NULL;
167 bm->unit = -1;
169 return 0;
172 static void bmdma_restart_dma(BMDMAState *bm, enum ide_dma_cmd dma_cmd)
174 IDEState *s = bmdma_active_if(bm);
176 ide_set_sector(s, bm->sector_num);
177 s->io_buffer_index = 0;
178 s->io_buffer_size = 0;
179 s->nsector = bm->nsector;
180 s->dma_cmd = dma_cmd;
181 bm->cur_addr = bm->addr;
182 bm->dma_cb = ide_dma_cb;
183 bmdma_start_dma(&bm->dma, s, bm->dma_cb);
186 /* TODO This should be common IDE code */
187 static void bmdma_restart_bh(void *opaque)
189 BMDMAState *bm = opaque;
190 IDEBus *bus = bm->bus;
191 int is_read;
192 int error_status;
194 qemu_bh_delete(bm->bh);
195 bm->bh = NULL;
197 if (bm->unit == (uint8_t) -1) {
198 return;
201 is_read = !!(bus->error_status & BM_STATUS_RETRY_READ);
203 /* The error status must be cleared before resubmitting the request: The
204 * request may fail again, and this case can only be distinguished if the
205 * called function can set a new error status. */
206 error_status = bus->error_status;
207 bus->error_status = 0;
209 if (error_status & BM_STATUS_DMA_RETRY) {
210 if (error_status & BM_STATUS_RETRY_TRIM) {
211 bmdma_restart_dma(bm, IDE_DMA_TRIM);
212 } else {
213 bmdma_restart_dma(bm, is_read ? IDE_DMA_READ : IDE_DMA_WRITE);
215 } else if (error_status & BM_STATUS_PIO_RETRY) {
216 if (is_read) {
217 ide_sector_read(bmdma_active_if(bm));
218 } else {
219 ide_sector_write(bmdma_active_if(bm));
221 } else if (error_status & BM_STATUS_RETRY_FLUSH) {
222 ide_flush_cache(bmdma_active_if(bm));
226 static void bmdma_restart_cb(void *opaque, int running, RunState state)
228 IDEDMA *dma = opaque;
229 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
231 if (!running)
232 return;
234 if (!bm->bh) {
235 bm->bh = qemu_bh_new(bmdma_restart_bh, &bm->dma);
236 qemu_bh_schedule(bm->bh);
240 static void bmdma_cancel(BMDMAState *bm)
242 if (bm->status & BM_STATUS_DMAING) {
243 /* cancel DMA request */
244 bmdma_set_inactive(&bm->dma);
248 static int bmdma_reset(IDEDMA *dma)
250 BMDMAState *bm = DO_UPCAST(BMDMAState, dma, dma);
252 #ifdef DEBUG_IDE
253 printf("ide: dma_reset\n");
254 #endif
255 bmdma_cancel(bm);
256 bm->cmd = 0;
257 bm->status = 0;
258 bm->addr = 0;
259 bm->cur_addr = 0;
260 bm->cur_prd_last = 0;
261 bm->cur_prd_addr = 0;
262 bm->cur_prd_len = 0;
263 bm->sector_num = 0;
264 bm->nsector = 0;
266 return 0;
269 static int bmdma_start_transfer(IDEDMA *dma)
271 return 0;
274 static void bmdma_irq(void *opaque, int n, int level)
276 BMDMAState *bm = opaque;
278 if (!level) {
279 /* pass through lower */
280 qemu_set_irq(bm->irq, level);
281 return;
284 bm->status |= BM_STATUS_INT;
286 /* trigger the real irq */
287 qemu_set_irq(bm->irq, level);
290 void bmdma_cmd_writeb(BMDMAState *bm, uint32_t val)
292 #ifdef DEBUG_IDE
293 printf("%s: 0x%08x\n", __func__, val);
294 #endif
296 /* Ignore writes to SSBM if it keeps the old value */
297 if ((val & BM_CMD_START) != (bm->cmd & BM_CMD_START)) {
298 if (!(val & BM_CMD_START)) {
300 * We can't cancel Scatter Gather DMA in the middle of the
301 * operation or a partial (not full) DMA transfer would reach
302 * the storage so we wait for completion instead (we beahve
303 * like if the DMA was completed by the time the guest trying
304 * to cancel dma with bmdma_cmd_writeb with BM_CMD_START not
305 * set).
307 * In the future we'll be able to safely cancel the I/O if the
308 * whole DMA operation will be submitted to disk with a single
309 * aio operation with preadv/pwritev.
311 if (bm->bus->dma->aiocb) {
312 bdrv_drain_all();
313 assert(bm->bus->dma->aiocb == NULL);
314 assert((bm->status & BM_STATUS_DMAING) == 0);
316 } else {
317 bm->cur_addr = bm->addr;
318 if (!(bm->status & BM_STATUS_DMAING)) {
319 bm->status |= BM_STATUS_DMAING;
320 /* start dma transfer if possible */
321 if (bm->dma_cb)
322 bm->dma_cb(bmdma_active_if(bm), 0);
327 bm->cmd = val & 0x09;
330 static uint64_t bmdma_addr_read(void *opaque, target_phys_addr_t addr,
331 unsigned width)
333 BMDMAState *bm = opaque;
334 uint32_t mask = (1ULL << (width * 8)) - 1;
335 uint64_t data;
337 data = (bm->addr >> (addr * 8)) & mask;
338 #ifdef DEBUG_IDE
339 printf("%s: 0x%08x\n", __func__, (unsigned)data);
340 #endif
341 return data;
344 static void bmdma_addr_write(void *opaque, target_phys_addr_t addr,
345 uint64_t data, unsigned width)
347 BMDMAState *bm = opaque;
348 int shift = addr * 8;
349 uint32_t mask = (1ULL << (width * 8)) - 1;
351 #ifdef DEBUG_IDE
352 printf("%s: 0x%08x\n", __func__, (unsigned)data);
353 #endif
354 bm->addr &= ~(mask << shift);
355 bm->addr |= ((data & mask) << shift) & ~3;
358 MemoryRegionOps bmdma_addr_ioport_ops = {
359 .read = bmdma_addr_read,
360 .write = bmdma_addr_write,
361 .endianness = DEVICE_LITTLE_ENDIAN,
364 static bool ide_bmdma_current_needed(void *opaque)
366 BMDMAState *bm = opaque;
368 return (bm->cur_prd_len != 0);
371 static bool ide_bmdma_status_needed(void *opaque)
373 BMDMAState *bm = opaque;
375 /* Older versions abused some bits in the status register for internal
376 * error state. If any of these bits are set, we must add a subsection to
377 * transfer the real status register */
378 uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS;
380 return ((bm->status & abused_bits) != 0);
383 static void ide_bmdma_pre_save(void *opaque)
385 BMDMAState *bm = opaque;
386 uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS;
388 bm->migration_compat_status =
389 (bm->status & ~abused_bits) | (bm->bus->error_status & abused_bits);
392 /* This function accesses bm->bus->error_status which is loaded only after
393 * BMDMA itself. This is why the function is called from ide_pci_post_load
394 * instead of being registered with VMState where it would run too early. */
395 static int ide_bmdma_post_load(void *opaque, int version_id)
397 BMDMAState *bm = opaque;
398 uint8_t abused_bits = BM_MIGRATION_COMPAT_STATUS_BITS;
400 if (bm->status == 0) {
401 bm->status = bm->migration_compat_status & ~abused_bits;
402 bm->bus->error_status |= bm->migration_compat_status & abused_bits;
405 return 0;
408 static const VMStateDescription vmstate_bmdma_current = {
409 .name = "ide bmdma_current",
410 .version_id = 1,
411 .minimum_version_id = 1,
412 .minimum_version_id_old = 1,
413 .fields = (VMStateField []) {
414 VMSTATE_UINT32(cur_addr, BMDMAState),
415 VMSTATE_UINT32(cur_prd_last, BMDMAState),
416 VMSTATE_UINT32(cur_prd_addr, BMDMAState),
417 VMSTATE_UINT32(cur_prd_len, BMDMAState),
418 VMSTATE_END_OF_LIST()
422 const VMStateDescription vmstate_bmdma_status = {
423 .name ="ide bmdma/status",
424 .version_id = 1,
425 .minimum_version_id = 1,
426 .minimum_version_id_old = 1,
427 .fields = (VMStateField []) {
428 VMSTATE_UINT8(status, BMDMAState),
429 VMSTATE_END_OF_LIST()
433 static const VMStateDescription vmstate_bmdma = {
434 .name = "ide bmdma",
435 .version_id = 3,
436 .minimum_version_id = 0,
437 .minimum_version_id_old = 0,
438 .pre_save = ide_bmdma_pre_save,
439 .fields = (VMStateField []) {
440 VMSTATE_UINT8(cmd, BMDMAState),
441 VMSTATE_UINT8(migration_compat_status, BMDMAState),
442 VMSTATE_UINT32(addr, BMDMAState),
443 VMSTATE_INT64(sector_num, BMDMAState),
444 VMSTATE_UINT32(nsector, BMDMAState),
445 VMSTATE_UINT8(unit, BMDMAState),
446 VMSTATE_END_OF_LIST()
448 .subsections = (VMStateSubsection []) {
450 .vmsd = &vmstate_bmdma_current,
451 .needed = ide_bmdma_current_needed,
452 }, {
453 .vmsd = &vmstate_bmdma_status,
454 .needed = ide_bmdma_status_needed,
455 }, {
456 /* empty */
461 static int ide_pci_post_load(void *opaque, int version_id)
463 PCIIDEState *d = opaque;
464 int i;
466 for(i = 0; i < 2; i++) {
467 /* current versions always store 0/1, but older version
468 stored bigger values. We only need last bit */
469 d->bmdma[i].unit &= 1;
470 ide_bmdma_post_load(&d->bmdma[i], -1);
473 return 0;
476 const VMStateDescription vmstate_ide_pci = {
477 .name = "ide",
478 .version_id = 3,
479 .minimum_version_id = 0,
480 .minimum_version_id_old = 0,
481 .post_load = ide_pci_post_load,
482 .fields = (VMStateField []) {
483 VMSTATE_PCI_DEVICE(dev, PCIIDEState),
484 VMSTATE_STRUCT_ARRAY(bmdma, PCIIDEState, 2, 0,
485 vmstate_bmdma, BMDMAState),
486 VMSTATE_IDE_BUS_ARRAY(bus, PCIIDEState, 2),
487 VMSTATE_IDE_DRIVES(bus[0].ifs, PCIIDEState),
488 VMSTATE_IDE_DRIVES(bus[1].ifs, PCIIDEState),
489 VMSTATE_END_OF_LIST()
493 void pci_ide_create_devs(PCIDevice *dev, DriveInfo **hd_table)
495 PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
496 static const int bus[4] = { 0, 0, 1, 1 };
497 static const int unit[4] = { 0, 1, 0, 1 };
498 int i;
500 for (i = 0; i < 4; i++) {
501 if (hd_table[i] == NULL)
502 continue;
503 ide_create_drive(d->bus+bus[i], unit[i], hd_table[i]);
507 static const struct IDEDMAOps bmdma_ops = {
508 .start_dma = bmdma_start_dma,
509 .start_transfer = bmdma_start_transfer,
510 .prepare_buf = bmdma_prepare_buf,
511 .rw_buf = bmdma_rw_buf,
512 .set_unit = bmdma_set_unit,
513 .add_status = bmdma_add_status,
514 .set_inactive = bmdma_set_inactive,
515 .restart_cb = bmdma_restart_cb,
516 .reset = bmdma_reset,
519 void bmdma_init(IDEBus *bus, BMDMAState *bm, PCIIDEState *d)
521 qemu_irq *irq;
523 if (bus->dma == &bm->dma) {
524 return;
527 bm->dma.ops = &bmdma_ops;
528 bus->dma = &bm->dma;
529 bm->irq = bus->irq;
530 irq = qemu_allocate_irqs(bmdma_irq, bm, 1);
531 bus->irq = *irq;
532 bm->pci_dev = d;