target-ppc: Fix invalid SPR read/write warnings
[qemu/agraf.git] / hw / acpi / piix4.c
blobc4af1ccbb0011c0cf1e339d66d2d6fdead6fbddb
1 /*
2 * ACPI implementation
4 * Copyright (c) 2006 Fabrice Bellard
6 * This library is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU Lesser General Public
8 * License version 2 as published by the Free Software Foundation.
10 * This library is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
13 * Lesser General Public License for more details.
15 * You should have received a copy of the GNU Lesser General Public
16 * License along with this library; if not, see <http://www.gnu.org/licenses/>
18 * Contributions after 2012-01-13 are licensed under the terms of the
19 * GNU GPL, version 2 or (at your option) any later version.
21 #include "hw/hw.h"
22 #include "hw/i386/pc.h"
23 #include "hw/isa/apm.h"
24 #include "hw/i2c/pm_smbus.h"
25 #include "hw/pci/pci.h"
26 #include "hw/acpi/acpi.h"
27 #include "sysemu/sysemu.h"
28 #include "qemu/range.h"
29 #include "exec/ioport.h"
30 #include "hw/nvram/fw_cfg.h"
31 #include "exec/address-spaces.h"
33 //#define DEBUG
35 #ifdef DEBUG
36 # define PIIX4_DPRINTF(format, ...) printf(format, ## __VA_ARGS__)
37 #else
38 # define PIIX4_DPRINTF(format, ...) do { } while (0)
39 #endif
41 #define GPE_BASE 0xafe0
42 #define GPE_LEN 4
44 #define PCI_HOTPLUG_ADDR 0xae00
45 #define PCI_HOTPLUG_SIZE 0x000f
46 #define PCI_UP_BASE 0xae00
47 #define PCI_DOWN_BASE 0xae04
48 #define PCI_EJ_BASE 0xae08
49 #define PCI_RMV_BASE 0xae0c
51 #define PIIX4_PROC_BASE 0xaf00
52 #define PIIX4_PROC_LEN 32
54 #define PIIX4_PCI_HOTPLUG_STATUS 2
55 #define PIIX4_CPU_HOTPLUG_STATUS 4
57 struct pci_status {
58 uint32_t up; /* deprecated, maintained for migration compatibility */
59 uint32_t down;
62 typedef struct CPUStatus {
63 uint8_t sts[PIIX4_PROC_LEN];
64 } CPUStatus;
66 typedef struct PIIX4PMState {
67 PCIDevice dev;
69 MemoryRegion io;
70 MemoryRegion io_gpe;
71 MemoryRegion io_pci;
72 MemoryRegion io_cpu;
73 ACPIREGS ar;
75 APMState apm;
77 PMSMBus smb;
78 uint32_t smb_io_base;
80 qemu_irq irq;
81 qemu_irq smi_irq;
82 int kvm_enabled;
83 Notifier machine_ready;
84 Notifier powerdown_notifier;
86 /* for pci hotplug */
87 struct pci_status pci0_status;
88 uint32_t pci0_hotplug_enable;
89 uint32_t pci0_slot_device_present;
91 uint8_t disable_s3;
92 uint8_t disable_s4;
93 uint8_t s4_val;
95 CPUStatus gpe_cpu;
96 Notifier cpu_added_notifier;
97 } PIIX4PMState;
99 static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,
100 PCIBus *bus, PIIX4PMState *s);
102 #define ACPI_ENABLE 0xf1
103 #define ACPI_DISABLE 0xf0
105 static void pm_update_sci(PIIX4PMState *s)
107 int sci_level, pmsts;
109 pmsts = acpi_pm1_evt_get_sts(&s->ar);
110 sci_level = (((pmsts & s->ar.pm1.evt.en) &
111 (ACPI_BITMASK_RT_CLOCK_ENABLE |
112 ACPI_BITMASK_POWER_BUTTON_ENABLE |
113 ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
114 ACPI_BITMASK_TIMER_ENABLE)) != 0) ||
115 (((s->ar.gpe.sts[0] & s->ar.gpe.en[0]) &
116 (PIIX4_PCI_HOTPLUG_STATUS | PIIX4_CPU_HOTPLUG_STATUS)) != 0);
118 qemu_set_irq(s->irq, sci_level);
119 /* schedule a timer interruption if needed */
120 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
121 !(pmsts & ACPI_BITMASK_TIMER_STATUS));
124 static void pm_tmr_timer(ACPIREGS *ar)
126 PIIX4PMState *s = container_of(ar, PIIX4PMState, ar);
127 pm_update_sci(s);
130 static void apm_ctrl_changed(uint32_t val, void *arg)
132 PIIX4PMState *s = arg;
134 /* ACPI specs 3.0, 4.7.2.5 */
135 acpi_pm1_cnt_update(&s->ar, val == ACPI_ENABLE, val == ACPI_DISABLE);
137 if (s->dev.config[0x5b] & (1 << 1)) {
138 if (s->smi_irq) {
139 qemu_irq_raise(s->smi_irq);
144 static void pm_io_space_update(PIIX4PMState *s)
146 uint32_t pm_io_base;
148 pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
149 pm_io_base &= 0xffc0;
151 memory_region_transaction_begin();
152 memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
153 memory_region_set_address(&s->io, pm_io_base);
154 memory_region_transaction_commit();
157 static void smbus_io_space_update(PIIX4PMState *s)
159 s->smb_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x90));
160 s->smb_io_base &= 0xffc0;
162 memory_region_transaction_begin();
163 memory_region_set_enabled(&s->smb.io, s->dev.config[0xd2] & 1);
164 memory_region_set_address(&s->smb.io, s->smb_io_base);
165 memory_region_transaction_commit();
168 static void pm_write_config(PCIDevice *d,
169 uint32_t address, uint32_t val, int len)
171 pci_default_write_config(d, address, val, len);
172 if (range_covers_byte(address, len, 0x80) ||
173 ranges_overlap(address, len, 0x40, 4)) {
174 pm_io_space_update((PIIX4PMState *)d);
176 if (range_covers_byte(address, len, 0xd2) ||
177 ranges_overlap(address, len, 0x90, 4)) {
178 smbus_io_space_update((PIIX4PMState *)d);
182 static void vmstate_pci_status_pre_save(void *opaque)
184 struct pci_status *pci0_status = opaque;
185 PIIX4PMState *s = container_of(pci0_status, PIIX4PMState, pci0_status);
187 /* We no longer track up, so build a safe value for migrating
188 * to a version that still does... of course these might get lost
189 * by an old buggy implementation, but we try. */
190 pci0_status->up = s->pci0_slot_device_present & s->pci0_hotplug_enable;
193 static int vmstate_acpi_post_load(void *opaque, int version_id)
195 PIIX4PMState *s = opaque;
197 pm_io_space_update(s);
198 return 0;
201 #define VMSTATE_GPE_ARRAY(_field, _state) \
203 .name = (stringify(_field)), \
204 .version_id = 0, \
205 .info = &vmstate_info_uint16, \
206 .size = sizeof(uint16_t), \
207 .flags = VMS_SINGLE | VMS_POINTER, \
208 .offset = vmstate_offset_pointer(_state, _field, uint8_t), \
211 static const VMStateDescription vmstate_gpe = {
212 .name = "gpe",
213 .version_id = 1,
214 .minimum_version_id = 1,
215 .minimum_version_id_old = 1,
216 .fields = (VMStateField []) {
217 VMSTATE_GPE_ARRAY(sts, ACPIGPE),
218 VMSTATE_GPE_ARRAY(en, ACPIGPE),
219 VMSTATE_END_OF_LIST()
223 static const VMStateDescription vmstate_pci_status = {
224 .name = "pci_status",
225 .version_id = 1,
226 .minimum_version_id = 1,
227 .minimum_version_id_old = 1,
228 .pre_save = vmstate_pci_status_pre_save,
229 .fields = (VMStateField []) {
230 VMSTATE_UINT32(up, struct pci_status),
231 VMSTATE_UINT32(down, struct pci_status),
232 VMSTATE_END_OF_LIST()
236 static int acpi_load_old(QEMUFile *f, void *opaque, int version_id)
238 PIIX4PMState *s = opaque;
239 int ret, i;
240 uint16_t temp;
242 ret = pci_device_load(&s->dev, f);
243 if (ret < 0) {
244 return ret;
246 qemu_get_be16s(f, &s->ar.pm1.evt.sts);
247 qemu_get_be16s(f, &s->ar.pm1.evt.en);
248 qemu_get_be16s(f, &s->ar.pm1.cnt.cnt);
250 ret = vmstate_load_state(f, &vmstate_apm, &s->apm, 1);
251 if (ret) {
252 return ret;
255 qemu_get_timer(f, s->ar.tmr.timer);
256 qemu_get_sbe64s(f, &s->ar.tmr.overflow_time);
258 qemu_get_be16s(f, (uint16_t *)s->ar.gpe.sts);
259 for (i = 0; i < 3; i++) {
260 qemu_get_be16s(f, &temp);
263 qemu_get_be16s(f, (uint16_t *)s->ar.gpe.en);
264 for (i = 0; i < 3; i++) {
265 qemu_get_be16s(f, &temp);
268 ret = vmstate_load_state(f, &vmstate_pci_status, &s->pci0_status, 1);
269 return ret;
272 /* qemu-kvm 1.2 uses version 3 but advertised as 2
273 * To support incoming qemu-kvm 1.2 migration, change version_id
274 * and minimum_version_id to 2 below (which breaks migration from
275 * qemu 1.2).
278 static const VMStateDescription vmstate_acpi = {
279 .name = "piix4_pm",
280 .version_id = 3,
281 .minimum_version_id = 3,
282 .minimum_version_id_old = 1,
283 .load_state_old = acpi_load_old,
284 .post_load = vmstate_acpi_post_load,
285 .fields = (VMStateField []) {
286 VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
287 VMSTATE_UINT16(ar.pm1.evt.sts, PIIX4PMState),
288 VMSTATE_UINT16(ar.pm1.evt.en, PIIX4PMState),
289 VMSTATE_UINT16(ar.pm1.cnt.cnt, PIIX4PMState),
290 VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
291 VMSTATE_TIMER(ar.tmr.timer, PIIX4PMState),
292 VMSTATE_INT64(ar.tmr.overflow_time, PIIX4PMState),
293 VMSTATE_STRUCT(ar.gpe, PIIX4PMState, 2, vmstate_gpe, ACPIGPE),
294 VMSTATE_STRUCT(pci0_status, PIIX4PMState, 2, vmstate_pci_status,
295 struct pci_status),
296 VMSTATE_END_OF_LIST()
300 static void acpi_piix_eject_slot(PIIX4PMState *s, unsigned slots)
302 BusChild *kid, *next;
303 BusState *bus = qdev_get_parent_bus(&s->dev.qdev);
304 int slot = ffs(slots) - 1;
305 bool slot_free = true;
307 /* Mark request as complete */
308 s->pci0_status.down &= ~(1U << slot);
310 QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {
311 DeviceState *qdev = kid->child;
312 PCIDevice *dev = PCI_DEVICE(qdev);
313 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
314 if (PCI_SLOT(dev->devfn) == slot) {
315 if (pc->no_hotplug) {
316 slot_free = false;
317 } else {
318 qdev_free(qdev);
322 if (slot_free) {
323 s->pci0_slot_device_present &= ~(1U << slot);
327 static void piix4_update_hotplug(PIIX4PMState *s)
329 PCIDevice *dev = &s->dev;
330 BusState *bus = qdev_get_parent_bus(&dev->qdev);
331 BusChild *kid, *next;
333 /* Execute any pending removes during reset */
334 while (s->pci0_status.down) {
335 acpi_piix_eject_slot(s, s->pci0_status.down);
338 s->pci0_hotplug_enable = ~0;
339 s->pci0_slot_device_present = 0;
341 QTAILQ_FOREACH_SAFE(kid, &bus->children, sibling, next) {
342 DeviceState *qdev = kid->child;
343 PCIDevice *pdev = PCI_DEVICE(qdev);
344 PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pdev);
345 int slot = PCI_SLOT(pdev->devfn);
347 if (pc->no_hotplug) {
348 s->pci0_hotplug_enable &= ~(1U << slot);
351 s->pci0_slot_device_present |= (1U << slot);
355 static void piix4_reset(void *opaque)
357 PIIX4PMState *s = opaque;
358 uint8_t *pci_conf = s->dev.config;
360 pci_conf[0x58] = 0;
361 pci_conf[0x59] = 0;
362 pci_conf[0x5a] = 0;
363 pci_conf[0x5b] = 0;
365 pci_conf[0x40] = 0x01; /* PM io base read only bit */
366 pci_conf[0x80] = 0;
368 if (s->kvm_enabled) {
369 /* Mark SMM as already inited (until KVM supports SMM). */
370 pci_conf[0x5B] = 0x02;
372 piix4_update_hotplug(s);
375 static void piix4_pm_powerdown_req(Notifier *n, void *opaque)
377 PIIX4PMState *s = container_of(n, PIIX4PMState, powerdown_notifier);
379 assert(s != NULL);
380 acpi_pm1_evt_power_down(&s->ar);
383 static void piix4_pm_machine_ready(Notifier *n, void *opaque)
385 PIIX4PMState *s = container_of(n, PIIX4PMState, machine_ready);
386 uint8_t *pci_conf;
388 pci_conf = s->dev.config;
389 pci_conf[0x5f] = (isa_is_ioport_assigned(0x378) ? 0x80 : 0) | 0x10;
390 pci_conf[0x63] = 0x60;
391 pci_conf[0x67] = (isa_is_ioport_assigned(0x3f8) ? 0x08 : 0) |
392 (isa_is_ioport_assigned(0x2f8) ? 0x90 : 0);
396 static int piix4_pm_initfn(PCIDevice *dev)
398 PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
399 uint8_t *pci_conf;
401 pci_conf = s->dev.config;
402 pci_conf[0x06] = 0x80;
403 pci_conf[0x07] = 0x02;
404 pci_conf[0x09] = 0x00;
405 pci_conf[0x3d] = 0x01; // interrupt pin 1
407 /* APM */
408 apm_init(dev, &s->apm, apm_ctrl_changed, s);
410 if (s->kvm_enabled) {
411 /* Mark SMM as already inited to prevent SMM from running. KVM does not
412 * support SMM mode. */
413 pci_conf[0x5B] = 0x02;
416 /* XXX: which specification is used ? The i82731AB has different
417 mappings */
418 pci_conf[0x90] = s->smb_io_base | 1;
419 pci_conf[0x91] = s->smb_io_base >> 8;
420 pci_conf[0xd2] = 0x09;
421 pm_smbus_init(&s->dev.qdev, &s->smb);
422 memory_region_set_enabled(&s->smb.io, pci_conf[0xd2] & 1);
423 memory_region_add_subregion(pci_address_space_io(dev),
424 s->smb_io_base, &s->smb.io);
426 memory_region_init(&s->io, "piix4-pm", 64);
427 memory_region_set_enabled(&s->io, false);
428 memory_region_add_subregion(pci_address_space_io(dev),
429 0, &s->io);
431 acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
432 acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
433 acpi_pm1_cnt_init(&s->ar, &s->io, s->s4_val);
434 acpi_gpe_init(&s->ar, GPE_LEN);
436 s->powerdown_notifier.notify = piix4_pm_powerdown_req;
437 qemu_register_powerdown_notifier(&s->powerdown_notifier);
439 s->machine_ready.notify = piix4_pm_machine_ready;
440 qemu_add_machine_init_done_notifier(&s->machine_ready);
441 qemu_register_reset(piix4_reset, s);
443 piix4_acpi_system_hot_add_init(pci_address_space_io(dev), dev->bus, s);
445 return 0;
448 i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
449 qemu_irq sci_irq, qemu_irq smi_irq,
450 int kvm_enabled, void *fw_cfg)
452 PCIDevice *dev;
453 PIIX4PMState *s;
455 dev = pci_create(bus, devfn, "PIIX4_PM");
456 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
458 s = DO_UPCAST(PIIX4PMState, dev, dev);
459 s->irq = sci_irq;
460 s->smi_irq = smi_irq;
461 s->kvm_enabled = kvm_enabled;
463 qdev_init_nofail(&dev->qdev);
465 if (fw_cfg) {
466 uint8_t suspend[6] = {128, 0, 0, 129, 128, 128};
467 suspend[3] = 1 | ((!s->disable_s3) << 7);
468 suspend[4] = s->s4_val | ((!s->disable_s4) << 7);
470 fw_cfg_add_file(fw_cfg, "etc/system-states", g_memdup(suspend, 6), 6);
473 return s->smb.smbus;
476 static Property piix4_pm_properties[] = {
477 DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
478 DEFINE_PROP_UINT8("disable_s3", PIIX4PMState, disable_s3, 0),
479 DEFINE_PROP_UINT8("disable_s4", PIIX4PMState, disable_s4, 0),
480 DEFINE_PROP_UINT8("s4_val", PIIX4PMState, s4_val, 2),
481 DEFINE_PROP_END_OF_LIST(),
484 static void piix4_pm_class_init(ObjectClass *klass, void *data)
486 DeviceClass *dc = DEVICE_CLASS(klass);
487 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
489 k->no_hotplug = 1;
490 k->init = piix4_pm_initfn;
491 k->config_write = pm_write_config;
492 k->vendor_id = PCI_VENDOR_ID_INTEL;
493 k->device_id = PCI_DEVICE_ID_INTEL_82371AB_3;
494 k->revision = 0x03;
495 k->class_id = PCI_CLASS_BRIDGE_OTHER;
496 dc->desc = "PM";
497 dc->no_user = 1;
498 dc->vmsd = &vmstate_acpi;
499 dc->props = piix4_pm_properties;
502 static const TypeInfo piix4_pm_info = {
503 .name = "PIIX4_PM",
504 .parent = TYPE_PCI_DEVICE,
505 .instance_size = sizeof(PIIX4PMState),
506 .class_init = piix4_pm_class_init,
509 static void piix4_pm_register_types(void)
511 type_register_static(&piix4_pm_info);
514 type_init(piix4_pm_register_types)
516 static uint64_t gpe_readb(void *opaque, hwaddr addr, unsigned width)
518 PIIX4PMState *s = opaque;
519 uint32_t val = acpi_gpe_ioport_readb(&s->ar, addr);
521 PIIX4_DPRINTF("gpe read %x == %x\n", addr, val);
522 return val;
525 static void gpe_writeb(void *opaque, hwaddr addr, uint64_t val,
526 unsigned width)
528 PIIX4PMState *s = opaque;
530 acpi_gpe_ioport_writeb(&s->ar, addr, val);
531 pm_update_sci(s);
533 PIIX4_DPRINTF("gpe write %x <== %d\n", addr, val);
536 static const MemoryRegionOps piix4_gpe_ops = {
537 .read = gpe_readb,
538 .write = gpe_writeb,
539 .valid.min_access_size = 1,
540 .valid.max_access_size = 4,
541 .impl.min_access_size = 1,
542 .impl.max_access_size = 1,
543 .endianness = DEVICE_LITTLE_ENDIAN,
546 static uint64_t pci_read(void *opaque, hwaddr addr, unsigned int size)
548 PIIX4PMState *s = opaque;
549 uint32_t val = 0;
551 switch (addr) {
552 case PCI_UP_BASE - PCI_HOTPLUG_ADDR:
553 /* Manufacture an "up" value to cause a device check on any hotplug
554 * slot with a device. Extra device checks are harmless. */
555 val = s->pci0_slot_device_present & s->pci0_hotplug_enable;
556 PIIX4_DPRINTF("pci_up_read %x\n", val);
557 break;
558 case PCI_DOWN_BASE - PCI_HOTPLUG_ADDR:
559 val = s->pci0_status.down;
560 PIIX4_DPRINTF("pci_down_read %x\n", val);
561 break;
562 case PCI_EJ_BASE - PCI_HOTPLUG_ADDR:
563 /* No feature defined yet */
564 PIIX4_DPRINTF("pci_features_read %x\n", val);
565 break;
566 case PCI_RMV_BASE - PCI_HOTPLUG_ADDR:
567 val = s->pci0_hotplug_enable;
568 break;
569 default:
570 break;
573 return val;
576 static void pci_write(void *opaque, hwaddr addr, uint64_t data,
577 unsigned int size)
579 switch (addr) {
580 case PCI_EJ_BASE - PCI_HOTPLUG_ADDR:
581 acpi_piix_eject_slot(opaque, (uint32_t)data);
582 PIIX4_DPRINTF("pciej write %" HWADDR_PRIx " <== % " PRIu64 "\n",
583 addr, data);
584 break;
585 default:
586 break;
590 static const MemoryRegionOps piix4_pci_ops = {
591 .read = pci_read,
592 .write = pci_write,
593 .endianness = DEVICE_LITTLE_ENDIAN,
594 .valid = {
595 .min_access_size = 4,
596 .max_access_size = 4,
600 static uint64_t cpu_status_read(void *opaque, hwaddr addr, unsigned int size)
602 PIIX4PMState *s = opaque;
603 CPUStatus *cpus = &s->gpe_cpu;
604 uint64_t val = cpus->sts[addr];
606 return val;
609 static void cpu_status_write(void *opaque, hwaddr addr, uint64_t data,
610 unsigned int size)
612 /* TODO: implement VCPU removal on guest signal that CPU can be removed */
615 static const MemoryRegionOps cpu_hotplug_ops = {
616 .read = cpu_status_read,
617 .write = cpu_status_write,
618 .endianness = DEVICE_LITTLE_ENDIAN,
619 .valid = {
620 .min_access_size = 1,
621 .max_access_size = 1,
625 typedef enum {
626 PLUG,
627 UNPLUG,
628 } HotplugEventType;
630 static void piix4_cpu_hotplug_req(PIIX4PMState *s, CPUState *cpu,
631 HotplugEventType action)
633 CPUStatus *g = &s->gpe_cpu;
634 ACPIGPE *gpe = &s->ar.gpe;
635 CPUClass *k = CPU_GET_CLASS(cpu);
636 int64_t cpu_id;
638 assert(s != NULL);
640 *gpe->sts = *gpe->sts | PIIX4_CPU_HOTPLUG_STATUS;
641 cpu_id = k->get_arch_id(CPU(cpu));
642 if (action == PLUG) {
643 g->sts[cpu_id / 8] |= (1 << (cpu_id % 8));
644 } else {
645 g->sts[cpu_id / 8] &= ~(1 << (cpu_id % 8));
647 pm_update_sci(s);
650 static void piix4_cpu_added_req(Notifier *n, void *opaque)
652 PIIX4PMState *s = container_of(n, PIIX4PMState, cpu_added_notifier);
654 piix4_cpu_hotplug_req(s, CPU(opaque), PLUG);
657 static void piix4_init_cpu_status(CPUState *cpu, void *data)
659 CPUStatus *g = (CPUStatus *)data;
660 CPUClass *k = CPU_GET_CLASS(cpu);
661 int64_t id = k->get_arch_id(cpu);
663 g_assert((id / 8) < PIIX4_PROC_LEN);
664 g->sts[id / 8] |= (1 << (id % 8));
667 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
668 PCIHotplugState state);
670 static void piix4_acpi_system_hot_add_init(MemoryRegion *parent,
671 PCIBus *bus, PIIX4PMState *s)
673 memory_region_init_io(&s->io_gpe, &piix4_gpe_ops, s, "apci-gpe0",
674 GPE_LEN);
675 memory_region_add_subregion(parent, GPE_BASE, &s->io_gpe);
677 memory_region_init_io(&s->io_pci, &piix4_pci_ops, s, "apci-pci-hotplug",
678 PCI_HOTPLUG_SIZE);
679 memory_region_add_subregion(parent, PCI_HOTPLUG_ADDR,
680 &s->io_pci);
681 pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
683 qemu_for_each_cpu(piix4_init_cpu_status, &s->gpe_cpu);
684 memory_region_init_io(&s->io_cpu, &cpu_hotplug_ops, s, "apci-cpu-hotplug",
685 PIIX4_PROC_LEN);
686 memory_region_add_subregion(parent, PIIX4_PROC_BASE, &s->io_cpu);
687 s->cpu_added_notifier.notify = piix4_cpu_added_req;
688 qemu_register_cpu_added_notifier(&s->cpu_added_notifier);
691 static void enable_device(PIIX4PMState *s, int slot)
693 s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
694 s->pci0_slot_device_present |= (1U << slot);
697 static void disable_device(PIIX4PMState *s, int slot)
699 s->ar.gpe.sts[0] |= PIIX4_PCI_HOTPLUG_STATUS;
700 s->pci0_status.down |= (1U << slot);
703 static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev,
704 PCIHotplugState state)
706 int slot = PCI_SLOT(dev->devfn);
707 PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
708 PCI_DEVICE(qdev));
710 /* Don't send event when device is enabled during qemu machine creation:
711 * it is present on boot, no hotplug event is necessary. We do send an
712 * event when the device is disabled later. */
713 if (state == PCI_COLDPLUG_ENABLED) {
714 s->pci0_slot_device_present |= (1U << slot);
715 return 0;
718 if (state == PCI_HOTPLUG_ENABLED) {
719 enable_device(s, slot);
720 } else {
721 disable_device(s, slot);
724 pm_update_sci(s);
726 return 0;