hw/serial.c

   1 /*
   2  * QEMU 16550A UART emulation
   3  *
   4  * Copyright (c) 2003-2004 Fabrice Bellard
   5  * Copyright (c) 2008 Citrix Systems, Inc.
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25
  26 #include "serial.h"
  27 #include "qemu-char.h"
  28 #include "qemu-timer.h"
  29 #include "exec-memory.h"
  30
  31 //#define DEBUG_SERIAL
  32
  33 #define UART_LCR_DLAB   0x80    /* Divisor latch access bit */
  34
  35 #define UART_IER_MSI    0x08    /* Enable Modem status interrupt */
  36 #define UART_IER_RLSI   0x04    /* Enable receiver line status interrupt */
  37 #define UART_IER_THRI   0x02    /* Enable Transmitter holding register int. */
  38 #define UART_IER_RDI    0x01    /* Enable receiver data interrupt */
  39
  40 #define UART_IIR_NO_INT 0x01    /* No interrupts pending */
  41 #define UART_IIR_ID     0x06    /* Mask for the interrupt ID */
  42
  43 #define UART_IIR_MSI    0x00    /* Modem status interrupt */
  44 #define UART_IIR_THRI   0x02    /* Transmitter holding register empty */
  45 #define UART_IIR_RDI    0x04    /* Receiver data interrupt */
  46 #define UART_IIR_RLSI   0x06    /* Receiver line status interrupt */
  47 #define UART_IIR_CTI    0x0C    /* Character Timeout Indication */
  48
  49 #define UART_IIR_FENF   0x80    /* Fifo enabled, but not functionning */
  50 #define UART_IIR_FE     0xC0    /* Fifo enabled */
  51
  52 /*
  53  * These are the definitions for the Modem Control Register
  54  */
  55 #define UART_MCR_LOOP   0x10    /* Enable loopback test mode */
  56 #define UART_MCR_OUT2   0x08    /* Out2 complement */
  57 #define UART_MCR_OUT1   0x04    /* Out1 complement */
  58 #define UART_MCR_RTS    0x02    /* RTS complement */
  59 #define UART_MCR_DTR    0x01    /* DTR complement */
  60
  61 /*
  62  * These are the definitions for the Modem Status Register
  63  */
  64 #define UART_MSR_DCD    0x80    /* Data Carrier Detect */
  65 #define UART_MSR_RI     0x40    /* Ring Indicator */
  66 #define UART_MSR_DSR    0x20    /* Data Set Ready */
  67 #define UART_MSR_CTS    0x10    /* Clear to Send */
  68 #define UART_MSR_DDCD   0x08    /* Delta DCD */
  69 #define UART_MSR_TERI   0x04    /* Trailing edge ring indicator */
  70 #define UART_MSR_DDSR   0x02    /* Delta DSR */
  71 #define UART_MSR_DCTS   0x01    /* Delta CTS */
  72 #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
  73
  74 #define UART_LSR_TEMT   0x40    /* Transmitter empty */
  75 #define UART_LSR_THRE   0x20    /* Transmit-hold-register empty */
  76 #define UART_LSR_BI     0x10    /* Break interrupt indicator */
  77 #define UART_LSR_FE     0x08    /* Frame error indicator */
  78 #define UART_LSR_PE     0x04    /* Parity error indicator */
  79 #define UART_LSR_OE     0x02    /* Overrun error indicator */
  80 #define UART_LSR_DR     0x01    /* Receiver data ready */
  81 #define UART_LSR_INT_ANY 0x1E   /* Any of the lsr-interrupt-triggering status bits */
  82
  83 /* Interrupt trigger levels. The byte-counts are for 16550A - in newer UARTs the byte-count for each ITL is higher. */
  84
  85 #define UART_FCR_ITL_1      0x00 /* 1 byte ITL */
  86 #define UART_FCR_ITL_2      0x40 /* 4 bytes ITL */
  87 #define UART_FCR_ITL_3      0x80 /* 8 bytes ITL */
  88 #define UART_FCR_ITL_4      0xC0 /* 14 bytes ITL */
  89
  90 #define UART_FCR_DMS        0x08    /* DMA Mode Select */
  91 #define UART_FCR_XFR        0x04    /* XMIT Fifo Reset */
  92 #define UART_FCR_RFR        0x02    /* RCVR Fifo Reset */
  93 #define UART_FCR_FE         0x01    /* FIFO Enable */
  94
  95 #define XMIT_FIFO           0
  96 #define RECV_FIFO           1
  97 #define MAX_XMIT_RETRY      4
  98
  99 #ifdef DEBUG_SERIAL
 100 #define DPRINTF(fmt, ...) \
 101 do { fprintf(stderr, "serial: " fmt , ## __VA_ARGS__); } while (0)
 102 #else
 103 #define DPRINTF(fmt, ...) \
 104 do {} while (0)
 105 #endif
 106
 107 static void serial_receive1(void *opaque, const uint8_t *buf, int size);
 108
 109 static void fifo_clear(SerialState *s, int fifo)
 110 {
 111     SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo;
 112     memset(f->data, 0, UART_FIFO_LENGTH);
 113     f->count = 0;
 114     f->head = 0;
 115     f->tail = 0;
 116 }
 117
 118 static int fifo_put(SerialState *s, int fifo, uint8_t chr)
 119 {
 120     SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo;
 121
 122     /* Receive overruns do not overwrite FIFO contents. */
 123     if (fifo == XMIT_FIFO || f->count < UART_FIFO_LENGTH) {
 124
 125         f->data[f->head++] = chr;
 126
 127         if (f->head == UART_FIFO_LENGTH)
 128             f->head = 0;
 129     }
 130
 131     if (f->count < UART_FIFO_LENGTH)
 132         f->count++;
 133     else if (fifo == RECV_FIFO)
 134         s->lsr |= UART_LSR_OE;
 135
 136     return 1;
 137 }
 138
 139 static uint8_t fifo_get(SerialState *s, int fifo)
 140 {
 141     SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo;
 142     uint8_t c;
 143
 144     if(f->count == 0)
 145         return 0;
 146
 147     c = f->data[f->tail++];
 148     if (f->tail == UART_FIFO_LENGTH)
 149         f->tail = 0;
 150     f->count--;
 151
 152     return c;
 153 }
 154
 155 static void serial_update_irq(SerialState *s)
 156 {
 157     uint8_t tmp_iir = UART_IIR_NO_INT;
 158
 159     if ((s->ier & UART_IER_RLSI) && (s->lsr & UART_LSR_INT_ANY)) {
 160         tmp_iir = UART_IIR_RLSI;
 161     } else if ((s->ier & UART_IER_RDI) && s->timeout_ipending) {
 162         /* Note that(s->ier & UART_IER_RDI) can mask this interrupt,
 163          * this is not in the specification but is observed on existing
 164          * hardware.  */
 165         tmp_iir = UART_IIR_CTI;
 166     } else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) &&
 167                (!(s->fcr & UART_FCR_FE) ||
 168                 s->recv_fifo.count >= s->recv_fifo.itl)) {
 169         tmp_iir = UART_IIR_RDI;
 170     } else if ((s->ier & UART_IER_THRI) && s->thr_ipending) {
 171         tmp_iir = UART_IIR_THRI;
 172     } else if ((s->ier & UART_IER_MSI) && (s->msr & UART_MSR_ANY_DELTA)) {
 173         tmp_iir = UART_IIR_MSI;
 174     }
 175
 176     s->iir = tmp_iir | (s->iir & 0xF0);
 177
 178     if (tmp_iir != UART_IIR_NO_INT) {
 179         qemu_irq_raise(s->irq);
 180     } else {
 181         qemu_irq_lower(s->irq);
 182     }
 183 }
 184
 185 static void serial_update_parameters(SerialState *s)
 186 {
 187     int speed, parity, data_bits, stop_bits, frame_size;
 188     QEMUSerialSetParams ssp;
 189
 190     if (s->divider == 0)
 191         return;
 192
 193     /* Start bit. */
 194     frame_size = 1;
 195     if (s->lcr & 0x08) {
 196         /* Parity bit. */
 197         frame_size++;
 198         if (s->lcr & 0x10)
 199             parity = 'E';
 200         else
 201             parity = 'O';
 202     } else {
 203             parity = 'N';
 204     }
 205     if (s->lcr & 0x04)
 206         stop_bits = 2;
 207     else
 208         stop_bits = 1;
 209
 210     data_bits = (s->lcr & 0x03) + 5;
 211     frame_size += data_bits + stop_bits;
 212     speed = s->baudbase / s->divider;
 213     ssp.speed = speed;
 214     ssp.parity = parity;
 215     ssp.data_bits = data_bits;
 216     ssp.stop_bits = stop_bits;
 217     s->char_transmit_time =  (get_ticks_per_sec() / speed) * frame_size;
 218     qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 219
 220     DPRINTF("speed=%d parity=%c data=%d stop=%d\n",
 221            speed, parity, data_bits, stop_bits);
 222 }
 223
 224 static void serial_update_msl(SerialState *s)
 225 {
 226     uint8_t omsr;
 227     int flags;
 228
 229     qemu_del_timer(s->modem_status_poll);
 230
 231     if (qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) {
 232         s->poll_msl = -1;
 233         return;
 234     }
 235
 236     omsr = s->msr;
 237
 238     s->msr = (flags & CHR_TIOCM_CTS) ? s->msr | UART_MSR_CTS : s->msr & ~UART_MSR_CTS;
 239     s->msr = (flags & CHR_TIOCM_DSR) ? s->msr | UART_MSR_DSR : s->msr & ~UART_MSR_DSR;
 240     s->msr = (flags & CHR_TIOCM_CAR) ? s->msr | UART_MSR_DCD : s->msr & ~UART_MSR_DCD;
 241     s->msr = (flags & CHR_TIOCM_RI) ? s->msr | UART_MSR_RI : s->msr & ~UART_MSR_RI;
 242
 243     if (s->msr != omsr) {
 244          /* Set delta bits */
 245          s->msr = s->msr | ((s->msr >> 4) ^ (omsr >> 4));
 246          /* UART_MSR_TERI only if change was from 1 -> 0 */
 247          if ((s->msr & UART_MSR_TERI) && !(omsr & UART_MSR_RI))
 248              s->msr &= ~UART_MSR_TERI;
 249          serial_update_irq(s);
 250     }
 251
 252     /* The real 16550A apparently has a 250ns response latency to line status changes.
 253        We'll be lazy and poll only every 10ms, and only poll it at all if MSI interrupts are turned on */
 254
 255     if (s->poll_msl)
 256         qemu_mod_timer(s->modem_status_poll, qemu_get_clock_ns(vm_clock) + get_ticks_per_sec() / 100);
 257 }
 258
 259 static void serial_xmit(void *opaque)
 260 {
 261     SerialState *s = opaque;
 262     uint64_t new_xmit_ts = qemu_get_clock_ns(vm_clock);
 263
 264     if (s->tsr_retry <= 0) {
 265         if (s->fcr & UART_FCR_FE) {
 266             s->tsr = fifo_get(s,XMIT_FIFO);
 267             if (!s->xmit_fifo.count)
 268                 s->lsr |= UART_LSR_THRE;
 269         } else if ((s->lsr & UART_LSR_THRE)) {
 270             return;
 271         } else {
 272             s->tsr = s->thr;
 273             s->lsr |= UART_LSR_THRE;
 274             s->lsr &= ~UART_LSR_TEMT;
 275         }
 276     }
 277
 278     if (s->mcr & UART_MCR_LOOP) {
 279         /* in loopback mode, say that we just received a char */
 280         serial_receive1(s, &s->tsr, 1);
 281     } else if (qemu_chr_fe_write(s->chr, &s->tsr, 1) != 1) {
 282         if ((s->tsr_retry >= 0) && (s->tsr_retry <= MAX_XMIT_RETRY)) {
 283             s->tsr_retry++;
 284             qemu_mod_timer(s->transmit_timer,  new_xmit_ts + s->char_transmit_time);
 285             return;
 286         } else if (s->poll_msl < 0) {
 287             /* If we exceed MAX_XMIT_RETRY and the backend is not a real serial port, then
 288             drop any further failed writes instantly, until we get one that goes through.
 289             This is to prevent guests that log to unconnected pipes or pty's from stalling. */
 290             s->tsr_retry = -1;
 291         }
 292     }
 293     else {
 294         s->tsr_retry = 0;
 295     }
 296
 297     s->last_xmit_ts = qemu_get_clock_ns(vm_clock);
 298     if (!(s->lsr & UART_LSR_THRE))
 299         qemu_mod_timer(s->transmit_timer, s->last_xmit_ts + s->char_transmit_time);
 300
 301     if (s->lsr & UART_LSR_THRE) {
 302         s->lsr |= UART_LSR_TEMT;
 303         s->thr_ipending = 1;
 304         serial_update_irq(s);
 305     }
 306 }
 307
 308
 309 static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val,
 310                                 unsigned size)
 311 {
 312     SerialState *s = opaque;
 313
 314     addr &= 7;
 315     DPRINTF("write addr=0x%02x val=0x%02x\n", addr, val);
 316     switch(addr) {
 317     default:
 318     case 0:
 319         if (s->lcr & UART_LCR_DLAB) {
 320             s->divider = (s->divider & 0xff00) | val;
 321             serial_update_parameters(s);
 322         } else {
 323             s->thr = (uint8_t) val;
 324             if(s->fcr & UART_FCR_FE) {
 325                 fifo_put(s, XMIT_FIFO, s->thr);
 326                 s->thr_ipending = 0;
 327                 s->lsr &= ~UART_LSR_TEMT;
 328                 s->lsr &= ~UART_LSR_THRE;
 329                 serial_update_irq(s);
 330             } else {
 331                 s->thr_ipending = 0;
 332                 s->lsr &= ~UART_LSR_THRE;
 333                 serial_update_irq(s);
 334             }
 335             serial_xmit(s);
 336         }
 337         break;
 338     case 1:
 339         if (s->lcr & UART_LCR_DLAB) {
 340             s->divider = (s->divider & 0x00ff) | (val << 8);
 341             serial_update_parameters(s);
 342         } else {
 343             s->ier = val & 0x0f;
 344             /* If the backend device is a real serial port, turn polling of the modem
 345                status lines on physical port on or off depending on UART_IER_MSI state */
 346             if (s->poll_msl >= 0) {
 347                 if (s->ier & UART_IER_MSI) {
 348                      s->poll_msl = 1;
 349                      serial_update_msl(s);
 350                 } else {
 351                      qemu_del_timer(s->modem_status_poll);
 352                      s->poll_msl = 0;
 353                 }
 354             }
 355             if (s->lsr & UART_LSR_THRE) {
 356                 s->thr_ipending = 1;
 357                 serial_update_irq(s);
 358             }
 359         }
 360         break;
 361     case 2:
 362         val = val & 0xFF;
 363
 364         if (s->fcr == val)
 365             break;
 366
 367         /* Did the enable/disable flag change? If so, make sure FIFOs get flushed */
 368         if ((val ^ s->fcr) & UART_FCR_FE)
 369             val |= UART_FCR_XFR | UART_FCR_RFR;
 370
 371         /* FIFO clear */
 372
 373         if (val & UART_FCR_RFR) {
 374             qemu_del_timer(s->fifo_timeout_timer);
 375             s->timeout_ipending=0;
 376             fifo_clear(s,RECV_FIFO);
 377         }
 378
 379         if (val & UART_FCR_XFR) {
 380             fifo_clear(s,XMIT_FIFO);
 381         }
 382
 383         if (val & UART_FCR_FE) {
 384             s->iir |= UART_IIR_FE;
 385             /* Set RECV_FIFO trigger Level */
 386             switch (val & 0xC0) {
 387             case UART_FCR_ITL_1:
 388                 s->recv_fifo.itl = 1;
 389                 break;
 390             case UART_FCR_ITL_2:
 391                 s->recv_fifo.itl = 4;
 392                 break;
 393             case UART_FCR_ITL_3:
 394                 s->recv_fifo.itl = 8;
 395                 break;
 396             case UART_FCR_ITL_4:
 397                 s->recv_fifo.itl = 14;
 398                 break;
 399             }
 400         } else
 401             s->iir &= ~UART_IIR_FE;
 402
 403         /* Set fcr - or at least the bits in it that are supposed to "stick" */
 404         s->fcr = val & 0xC9;
 405         serial_update_irq(s);
 406         break;
 407     case 3:
 408         {
 409             int break_enable;
 410             s->lcr = val;
 411             serial_update_parameters(s);
 412             break_enable = (val >> 6) & 1;
 413             if (break_enable != s->last_break_enable) {
 414                 s->last_break_enable = break_enable;
 415                 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
 416                                &break_enable);
 417             }
 418         }
 419         break;
 420     case 4:
 421         {
 422             int flags;
 423             int old_mcr = s->mcr;
 424             s->mcr = val & 0x1f;
 425             if (val & UART_MCR_LOOP)
 426                 break;
 427
 428             if (s->poll_msl >= 0 && old_mcr != s->mcr) {
 429
 430                 qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
 431
 432                 flags &= ~(CHR_TIOCM_RTS | CHR_TIOCM_DTR);
 433
 434                 if (val & UART_MCR_RTS)
 435                     flags |= CHR_TIOCM_RTS;
 436                 if (val & UART_MCR_DTR)
 437                     flags |= CHR_TIOCM_DTR;
 438
 439                 qemu_chr_fe_ioctl(s->chr,CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
 440                 /* Update the modem status after a one-character-send wait-time, since there may be a response
 441                    from the device/computer at the other end of the serial line */
 442                 qemu_mod_timer(s->modem_status_poll, qemu_get_clock_ns(vm_clock) + s->char_transmit_time);
 443             }
 444         }
 445         break;
 446     case 5:
 447         break;
 448     case 6:
 449         break;
 450     case 7:
 451         s->scr = val;
 452         break;
 453     }
 454 }
 455
 456 static uint64_t serial_ioport_read(void *opaque, hwaddr addr, unsigned size)
 457 {
 458     SerialState *s = opaque;
 459     uint32_t ret;
 460
 461     addr &= 7;
 462     switch(addr) {
 463     default:
 464     case 0:
 465         if (s->lcr & UART_LCR_DLAB) {
 466             ret = s->divider & 0xff;
 467         } else {
 468             if(s->fcr & UART_FCR_FE) {
 469                 ret = fifo_get(s,RECV_FIFO);
 470                 if (s->recv_fifo.count == 0)
 471                     s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
 472                 else
 473                     qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock_ns (vm_clock) + s->char_transmit_time * 4);
 474                 s->timeout_ipending = 0;
 475             } else {
 476                 ret = s->rbr;
 477                 s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
 478             }
 479             serial_update_irq(s);
 480             if (!(s->mcr & UART_MCR_LOOP)) {
 481                 /* in loopback mode, don't receive any data */
 482                 qemu_chr_accept_input(s->chr);
 483             }
 484         }
 485         break;
 486     case 1:
 487         if (s->lcr & UART_LCR_DLAB) {
 488             ret = (s->divider >> 8) & 0xff;
 489         } else {
 490             ret = s->ier;
 491         }
 492         break;
 493     case 2:
 494         ret = s->iir;
 495         if ((ret & UART_IIR_ID) == UART_IIR_THRI) {
 496             s->thr_ipending = 0;
 497             serial_update_irq(s);
 498         }
 499         break;
 500     case 3:
 501         ret = s->lcr;
 502         break;
 503     case 4:
 504         ret = s->mcr;
 505         break;
 506     case 5:
 507         ret = s->lsr;
 508         /* Clear break and overrun interrupts */
 509         if (s->lsr & (UART_LSR_BI|UART_LSR_OE)) {
 510             s->lsr &= ~(UART_LSR_BI|UART_LSR_OE);
 511             serial_update_irq(s);
 512         }
 513         break;
 514     case 6:
 515         if (s->mcr & UART_MCR_LOOP) {
 516             /* in loopback, the modem output pins are connected to the
 517                inputs */
 518             ret = (s->mcr & 0x0c) << 4;
 519             ret |= (s->mcr & 0x02) << 3;
 520             ret |= (s->mcr & 0x01) << 5;
 521         } else {
 522             if (s->poll_msl >= 0)
 523                 serial_update_msl(s);
 524             ret = s->msr;
 525             /* Clear delta bits & msr int after read, if they were set */
 526             if (s->msr & UART_MSR_ANY_DELTA) {
 527                 s->msr &= 0xF0;
 528                 serial_update_irq(s);
 529             }
 530         }
 531         break;
 532     case 7:
 533         ret = s->scr;
 534         break;
 535     }
 536     DPRINTF("read addr=0x%02x val=0x%02x\n", addr, ret);
 537     return ret;
 538 }
 539
 540 static int serial_can_receive(SerialState *s)
 541 {
 542     if(s->fcr & UART_FCR_FE) {
 543         if(s->recv_fifo.count < UART_FIFO_LENGTH)
 544         /* Advertise (fifo.itl - fifo.count) bytes when count < ITL, and 1 if above. If UART_FIFO_LENGTH - fifo.count is
 545         advertised the effect will be to almost always fill the fifo completely before the guest has a chance to respond,
 546         effectively overriding the ITL that the guest has set. */
 547              return (s->recv_fifo.count <= s->recv_fifo.itl) ? s->recv_fifo.itl - s->recv_fifo.count : 1;
 548         else
 549              return 0;
 550     } else {
 551     return !(s->lsr & UART_LSR_DR);
 552     }
 553 }
 554
 555 static void serial_receive_break(SerialState *s)
 556 {
 557     s->rbr = 0;
 558     /* When the LSR_DR is set a null byte is pushed into the fifo */
 559     fifo_put(s, RECV_FIFO, '\0');
 560     s->lsr |= UART_LSR_BI | UART_LSR_DR;
 561     serial_update_irq(s);
 562 }
 563
 564 /* There's data in recv_fifo and s->rbr has not been read for 4 char transmit times */
 565 static void fifo_timeout_int (void *opaque) {
 566     SerialState *s = opaque;
 567     if (s->recv_fifo.count) {
 568         s->timeout_ipending = 1;
 569         serial_update_irq(s);
 570     }
 571 }
 572
 573 static int serial_can_receive1(void *opaque)
 574 {
 575     SerialState *s = opaque;
 576     return serial_can_receive(s);
 577 }
 578
 579 static void serial_receive1(void *opaque, const uint8_t *buf, int size)
 580 {
 581     SerialState *s = opaque;
 582
 583     if (s->wakeup) {
 584         qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
 585     }
 586     if(s->fcr & UART_FCR_FE) {
 587         int i;
 588         for (i = 0; i < size; i++) {
 589             fifo_put(s, RECV_FIFO, buf[i]);
 590         }
 591         s->lsr |= UART_LSR_DR;
 592         /* call the timeout receive callback in 4 char transmit time */
 593         qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock_ns (vm_clock) + s->char_transmit_time * 4);
 594     } else {
 595         if (s->lsr & UART_LSR_DR)
 596             s->lsr |= UART_LSR_OE;
 597         s->rbr = buf[0];
 598         s->lsr |= UART_LSR_DR;
 599     }
 600     serial_update_irq(s);
 601 }
 602
 603 static void serial_event(void *opaque, int event)
 604 {
 605     SerialState *s = opaque;
 606     DPRINTF("event %x\n", event);
 607     if (event == CHR_EVENT_BREAK)
 608         serial_receive_break(s);
 609 }
 610
 611 static void serial_pre_save(void *opaque)
 612 {
 613     SerialState *s = opaque;
 614     s->fcr_vmstate = s->fcr;
 615 }
 616
 617 static int serial_post_load(void *opaque, int version_id)
 618 {
 619     SerialState *s = opaque;
 620
 621     if (version_id < 3) {
 622         s->fcr_vmstate = 0;
 623     }
 624     /* Initialize fcr via setter to perform essential side-effects */
 625     serial_ioport_write(s, 0x02, s->fcr_vmstate, 1);
 626     serial_update_parameters(s);
 627     return 0;
 628 }
 629
 630 const VMStateDescription vmstate_serial = {
 631     .name = "serial",
 632     .version_id = 3,
 633     .minimum_version_id = 2,
 634     .pre_save = serial_pre_save,
 635     .post_load = serial_post_load,
 636     .fields      = (VMStateField []) {
 637         VMSTATE_UINT16_V(divider, SerialState, 2),
 638         VMSTATE_UINT8(rbr, SerialState),
 639         VMSTATE_UINT8(ier, SerialState),
 640         VMSTATE_UINT8(iir, SerialState),
 641         VMSTATE_UINT8(lcr, SerialState),
 642         VMSTATE_UINT8(mcr, SerialState),
 643         VMSTATE_UINT8(lsr, SerialState),
 644         VMSTATE_UINT8(msr, SerialState),
 645         VMSTATE_UINT8(scr, SerialState),
 646         VMSTATE_UINT8_V(fcr_vmstate, SerialState, 3),
 647         VMSTATE_END_OF_LIST()
 648     }
 649 };
 650
 651 static void serial_reset(void *opaque)
 652 {
 653     SerialState *s = opaque;
 654
 655     s->rbr = 0;
 656     s->ier = 0;
 657     s->iir = UART_IIR_NO_INT;
 658     s->lcr = 0;
 659     s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
 660     s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS;
 661     /* Default to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, no parity. */
 662     s->divider = 0x0C;
 663     s->mcr = UART_MCR_OUT2;
 664     s->scr = 0;
 665     s->tsr_retry = 0;
 666     s->char_transmit_time = (get_ticks_per_sec() / 9600) * 10;
 667     s->poll_msl = 0;
 668
 669     fifo_clear(s,RECV_FIFO);
 670     fifo_clear(s,XMIT_FIFO);
 671
 672     s->last_xmit_ts = qemu_get_clock_ns(vm_clock);
 673
 674     s->thr_ipending = 0;
 675     s->last_break_enable = 0;
 676     qemu_irq_lower(s->irq);
 677 }
 678
 679 void serial_init_core(SerialState *s)
 680 {
 681     if (!s->chr) {
 682         fprintf(stderr, "Can't create serial device, empty char device\n");
 683         exit(1);
 684     }
 685
 686     s->modem_status_poll = qemu_new_timer_ns(vm_clock, (QEMUTimerCB *) serial_update_msl, s);
 687
 688     s->fifo_timeout_timer = qemu_new_timer_ns(vm_clock, (QEMUTimerCB *) fifo_timeout_int, s);
 689     s->transmit_timer = qemu_new_timer_ns(vm_clock, (QEMUTimerCB *) serial_xmit, s);
 690
 691     qemu_register_reset(serial_reset, s);
 692
 693     qemu_chr_add_handlers(s->chr, serial_can_receive1, serial_receive1,
 694                           serial_event, s);
 695 }
 696
 697 void serial_exit_core(SerialState *s)
 698 {
 699     qemu_chr_add_handlers(s->chr, NULL, NULL, NULL, NULL);
 700     qemu_unregister_reset(serial_reset, s);
 701 }
 702
 703 /* Change the main reference oscillator frequency. */
 704 void serial_set_frequency(SerialState *s, uint32_t frequency)
 705 {
 706     s->baudbase = frequency;
 707     serial_update_parameters(s);
 708 }
 709
 710 const MemoryRegionOps serial_io_ops = {
 711     .read = serial_ioport_read,
 712     .write = serial_ioport_write,
 713     .impl = {
 714         .min_access_size = 1,
 715         .max_access_size = 1,
 716     },
 717     .endianness = DEVICE_LITTLE_ENDIAN,
 718 };
 719
 720 SerialState *serial_init(int base, qemu_irq irq, int baudbase,
 721                          CharDriverState *chr)
 722 {
 723     SerialState *s;
 724
 725     s = g_malloc0(sizeof(SerialState));
 726
 727     s->irq = irq;
 728     s->baudbase = baudbase;
 729     s->chr = chr;
 730     serial_init_core(s);
 731
 732     vmstate_register(NULL, base, &vmstate_serial, s);
 733
 734     memory_region_init_io(&s->io, &serial_io_ops, s, "serial", 8);
 735     memory_region_add_subregion(get_system_io(), base, &s->io);
 736
 737     return s;
 738 }
 739
 740 /* Memory mapped interface */
 741 static uint64_t serial_mm_read(void *opaque, hwaddr addr,
 742                                unsigned size)
 743 {
 744     SerialState *s = opaque;
 745     return serial_ioport_read(s, addr >> s->it_shift, 1);
 746 }
 747
 748 static void serial_mm_write(void *opaque, hwaddr addr,
 749                             uint64_t value, unsigned size)
 750 {
 751     SerialState *s = opaque;
 752     value &= ~0u >> (32 - (size * 8));
 753     serial_ioport_write(s, addr >> s->it_shift, value, 1);
 754 }
 755
 756 static const MemoryRegionOps serial_mm_ops[3] = {
 757     [DEVICE_NATIVE_ENDIAN] = {
 758         .read = serial_mm_read,
 759         .write = serial_mm_write,
 760         .endianness = DEVICE_NATIVE_ENDIAN,
 761     },
 762     [DEVICE_LITTLE_ENDIAN] = {
 763         .read = serial_mm_read,
 764         .write = serial_mm_write,
 765         .endianness = DEVICE_LITTLE_ENDIAN,
 766     },
 767     [DEVICE_BIG_ENDIAN] = {
 768         .read = serial_mm_read,
 769         .write = serial_mm_write,
 770         .endianness = DEVICE_BIG_ENDIAN,
 771     },
 772 };
 773
 774 SerialState *serial_mm_init(MemoryRegion *address_space,
 775                             hwaddr base, int it_shift,
 776                             qemu_irq irq, int baudbase,
 777                             CharDriverState *chr, enum device_endian end)
 778 {
 779     SerialState *s;
 780
 781     s = g_malloc0(sizeof(SerialState));
 782
 783     s->it_shift = it_shift;
 784     s->irq = irq;
 785     s->baudbase = baudbase;
 786     s->chr = chr;
 787
 788     serial_init_core(s);
 789     vmstate_register(NULL, base, &vmstate_serial, s);
 790
 791     memory_region_init_io(&s->io, &serial_mm_ops[end], s,
 792                           "serial", 8 << it_shift);
 793     memory_region_add_subregion(address_space, base, &s->io);
 794
 795     serial_update_msl(s);
 796     return s;
 797 }