lsi53c895a: avoid a write only variable
[qemu.git] / hw / pc.c
blob69b13bf62cb2ffe3669844042db84776e7004e87
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "apic.h"
27 #include "fdc.h"
28 #include "ide.h"
29 #include "pci.h"
30 #include "vmware_vga.h"
31 #include "monitor.h"
32 #include "fw_cfg.h"
33 #include "hpet_emul.h"
34 #include "smbios.h"
35 #include "loader.h"
36 #include "elf.h"
37 #include "multiboot.h"
38 #include "mc146818rtc.h"
39 #include "msix.h"
40 #include "sysbus.h"
41 #include "sysemu.h"
42 #include "blockdev.h"
44 /* output Bochs bios info messages */
45 //#define DEBUG_BIOS
47 /* debug PC/ISA interrupts */
48 //#define DEBUG_IRQ
50 #ifdef DEBUG_IRQ
51 #define DPRINTF(fmt, ...) \
52 do { printf("CPUIRQ: " fmt , ## __VA_ARGS__); } while (0)
53 #else
54 #define DPRINTF(fmt, ...)
55 #endif
57 #define BIOS_FILENAME "bios.bin"
59 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
61 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
62 #define ACPI_DATA_SIZE 0x10000
63 #define BIOS_CFG_IOPORT 0x510
64 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
65 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
66 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
67 #define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3)
68 #define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4)
70 #define MSI_ADDR_BASE 0xfee00000
72 #define E820_NR_ENTRIES 16
74 struct e820_entry {
75 uint64_t address;
76 uint64_t length;
77 uint32_t type;
80 struct e820_table {
81 uint32_t count;
82 struct e820_entry entry[E820_NR_ENTRIES];
85 static struct e820_table e820_table;
87 void isa_irq_handler(void *opaque, int n, int level)
89 IsaIrqState *isa = (IsaIrqState *)opaque;
91 DPRINTF("isa_irqs: %s irq %d\n", level? "raise" : "lower", n);
92 if (n < 16) {
93 qemu_set_irq(isa->i8259[n], level);
95 if (isa->ioapic)
96 qemu_set_irq(isa->ioapic[n], level);
99 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
103 /* MSDOS compatibility mode FPU exception support */
104 static qemu_irq ferr_irq;
106 void pc_register_ferr_irq(qemu_irq irq)
108 ferr_irq = irq;
111 /* XXX: add IGNNE support */
112 void cpu_set_ferr(CPUX86State *s)
114 qemu_irq_raise(ferr_irq);
117 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
119 qemu_irq_lower(ferr_irq);
122 /* TSC handling */
123 uint64_t cpu_get_tsc(CPUX86State *env)
125 return cpu_get_ticks();
128 /* SMM support */
130 static cpu_set_smm_t smm_set;
131 static void *smm_arg;
133 void cpu_smm_register(cpu_set_smm_t callback, void *arg)
135 assert(smm_set == NULL);
136 assert(smm_arg == NULL);
137 smm_set = callback;
138 smm_arg = arg;
141 void cpu_smm_update(CPUState *env)
143 if (smm_set && smm_arg && env == first_cpu)
144 smm_set(!!(env->hflags & HF_SMM_MASK), smm_arg);
148 /* IRQ handling */
149 int cpu_get_pic_interrupt(CPUState *env)
151 int intno;
153 intno = apic_get_interrupt(env->apic_state);
154 if (intno >= 0) {
155 /* set irq request if a PIC irq is still pending */
156 /* XXX: improve that */
157 pic_update_irq(isa_pic);
158 return intno;
160 /* read the irq from the PIC */
161 if (!apic_accept_pic_intr(env->apic_state)) {
162 return -1;
165 intno = pic_read_irq(isa_pic);
166 return intno;
169 static void pic_irq_request(void *opaque, int irq, int level)
171 CPUState *env = first_cpu;
173 DPRINTF("pic_irqs: %s irq %d\n", level? "raise" : "lower", irq);
174 if (env->apic_state) {
175 while (env) {
176 if (apic_accept_pic_intr(env->apic_state)) {
177 apic_deliver_pic_intr(env->apic_state, level);
179 env = env->next_cpu;
181 } else {
182 if (level)
183 cpu_interrupt(env, CPU_INTERRUPT_HARD);
184 else
185 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
189 /* PC cmos mappings */
191 #define REG_EQUIPMENT_BYTE 0x14
193 static int cmos_get_fd_drive_type(int fd0)
195 int val;
197 switch (fd0) {
198 case 0:
199 /* 1.44 Mb 3"5 drive */
200 val = 4;
201 break;
202 case 1:
203 /* 2.88 Mb 3"5 drive */
204 val = 5;
205 break;
206 case 2:
207 /* 1.2 Mb 5"5 drive */
208 val = 2;
209 break;
210 default:
211 val = 0;
212 break;
214 return val;
217 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd,
218 ISADevice *s)
220 int cylinders, heads, sectors;
221 bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
222 rtc_set_memory(s, type_ofs, 47);
223 rtc_set_memory(s, info_ofs, cylinders);
224 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
225 rtc_set_memory(s, info_ofs + 2, heads);
226 rtc_set_memory(s, info_ofs + 3, 0xff);
227 rtc_set_memory(s, info_ofs + 4, 0xff);
228 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
229 rtc_set_memory(s, info_ofs + 6, cylinders);
230 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
231 rtc_set_memory(s, info_ofs + 8, sectors);
234 /* convert boot_device letter to something recognizable by the bios */
235 static int boot_device2nibble(char boot_device)
237 switch(boot_device) {
238 case 'a':
239 case 'b':
240 return 0x01; /* floppy boot */
241 case 'c':
242 return 0x02; /* hard drive boot */
243 case 'd':
244 return 0x03; /* CD-ROM boot */
245 case 'n':
246 return 0x04; /* Network boot */
248 return 0;
251 static int set_boot_dev(ISADevice *s, const char *boot_device, int fd_bootchk)
253 #define PC_MAX_BOOT_DEVICES 3
254 int nbds, bds[3] = { 0, };
255 int i;
257 nbds = strlen(boot_device);
258 if (nbds > PC_MAX_BOOT_DEVICES) {
259 error_report("Too many boot devices for PC");
260 return(1);
262 for (i = 0; i < nbds; i++) {
263 bds[i] = boot_device2nibble(boot_device[i]);
264 if (bds[i] == 0) {
265 error_report("Invalid boot device for PC: '%c'",
266 boot_device[i]);
267 return(1);
270 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
271 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
272 return(0);
275 static int pc_boot_set(void *opaque, const char *boot_device)
277 return set_boot_dev(opaque, boot_device, 0);
280 typedef struct pc_cmos_init_late_arg {
281 ISADevice *rtc_state;
282 BusState *idebus0, *idebus1;
283 } pc_cmos_init_late_arg;
285 static void pc_cmos_init_late(void *opaque)
287 pc_cmos_init_late_arg *arg = opaque;
288 ISADevice *s = arg->rtc_state;
289 int val;
290 BlockDriverState *hd_table[4];
291 int i;
293 ide_get_bs(hd_table, arg->idebus0);
294 ide_get_bs(hd_table + 2, arg->idebus1);
296 rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
297 if (hd_table[0])
298 cmos_init_hd(0x19, 0x1b, hd_table[0], s);
299 if (hd_table[1])
300 cmos_init_hd(0x1a, 0x24, hd_table[1], s);
302 val = 0;
303 for (i = 0; i < 4; i++) {
304 if (hd_table[i]) {
305 int cylinders, heads, sectors, translation;
306 /* NOTE: bdrv_get_geometry_hint() returns the physical
307 geometry. It is always such that: 1 <= sects <= 63, 1
308 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
309 geometry can be different if a translation is done. */
310 translation = bdrv_get_translation_hint(hd_table[i]);
311 if (translation == BIOS_ATA_TRANSLATION_AUTO) {
312 bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
313 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
314 /* No translation. */
315 translation = 0;
316 } else {
317 /* LBA translation. */
318 translation = 1;
320 } else {
321 translation--;
323 val |= translation << (i * 2);
326 rtc_set_memory(s, 0x39, val);
328 qemu_unregister_reset(pc_cmos_init_late, opaque);
331 void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
332 const char *boot_device,
333 BusState *idebus0, BusState *idebus1,
334 FDCtrl *floppy_controller, ISADevice *s)
336 int val;
337 int fd0, fd1, nb;
338 static pc_cmos_init_late_arg arg;
340 /* various important CMOS locations needed by PC/Bochs bios */
342 /* memory size */
343 val = 640; /* base memory in K */
344 rtc_set_memory(s, 0x15, val);
345 rtc_set_memory(s, 0x16, val >> 8);
347 val = (ram_size / 1024) - 1024;
348 if (val > 65535)
349 val = 65535;
350 rtc_set_memory(s, 0x17, val);
351 rtc_set_memory(s, 0x18, val >> 8);
352 rtc_set_memory(s, 0x30, val);
353 rtc_set_memory(s, 0x31, val >> 8);
355 if (above_4g_mem_size) {
356 rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
357 rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
358 rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
361 if (ram_size > (16 * 1024 * 1024))
362 val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
363 else
364 val = 0;
365 if (val > 65535)
366 val = 65535;
367 rtc_set_memory(s, 0x34, val);
368 rtc_set_memory(s, 0x35, val >> 8);
370 /* set the number of CPU */
371 rtc_set_memory(s, 0x5f, smp_cpus - 1);
373 /* set boot devices, and disable floppy signature check if requested */
374 if (set_boot_dev(s, boot_device, fd_bootchk)) {
375 exit(1);
378 /* floppy type */
380 fd0 = fdctrl_get_drive_type(floppy_controller, 0);
381 fd1 = fdctrl_get_drive_type(floppy_controller, 1);
383 val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
384 rtc_set_memory(s, 0x10, val);
386 val = 0;
387 nb = 0;
388 if (fd0 < 3)
389 nb++;
390 if (fd1 < 3)
391 nb++;
392 switch (nb) {
393 case 0:
394 break;
395 case 1:
396 val |= 0x01; /* 1 drive, ready for boot */
397 break;
398 case 2:
399 val |= 0x41; /* 2 drives, ready for boot */
400 break;
402 val |= 0x02; /* FPU is there */
403 val |= 0x04; /* PS/2 mouse installed */
404 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
406 /* hard drives */
407 arg.rtc_state = s;
408 arg.idebus0 = idebus0;
409 arg.idebus1 = idebus1;
410 qemu_register_reset(pc_cmos_init_late, &arg);
413 static void handle_a20_line_change(void *opaque, int irq, int level)
415 CPUState *cpu = opaque;
417 /* XXX: send to all CPUs ? */
418 cpu_x86_set_a20(cpu, level);
421 /***********************************************************/
422 /* Bochs BIOS debug ports */
424 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
426 static const char shutdown_str[8] = "Shutdown";
427 static int shutdown_index = 0;
429 switch(addr) {
430 /* Bochs BIOS messages */
431 case 0x400:
432 case 0x401:
433 fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
434 exit(1);
435 case 0x402:
436 case 0x403:
437 #ifdef DEBUG_BIOS
438 fprintf(stderr, "%c", val);
439 #endif
440 break;
441 case 0x8900:
442 /* same as Bochs power off */
443 if (val == shutdown_str[shutdown_index]) {
444 shutdown_index++;
445 if (shutdown_index == 8) {
446 shutdown_index = 0;
447 qemu_system_shutdown_request();
449 } else {
450 shutdown_index = 0;
452 break;
454 /* LGPL'ed VGA BIOS messages */
455 case 0x501:
456 case 0x502:
457 fprintf(stderr, "VGA BIOS panic, line %d\n", val);
458 exit(1);
459 case 0x500:
460 case 0x503:
461 #ifdef DEBUG_BIOS
462 fprintf(stderr, "%c", val);
463 #endif
464 break;
468 int e820_add_entry(uint64_t address, uint64_t length, uint32_t type)
470 int index = e820_table.count;
471 struct e820_entry *entry;
473 if (index >= E820_NR_ENTRIES)
474 return -EBUSY;
475 entry = &e820_table.entry[index];
477 entry->address = address;
478 entry->length = length;
479 entry->type = type;
481 e820_table.count++;
482 return e820_table.count;
485 static void *bochs_bios_init(void)
487 void *fw_cfg;
488 uint8_t *smbios_table;
489 size_t smbios_len;
490 uint64_t *numa_fw_cfg;
491 int i, j;
493 register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
494 register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
495 register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
496 register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
497 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
499 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
500 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
501 register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
502 register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
504 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
506 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
507 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
508 fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, (uint8_t *)acpi_tables,
509 acpi_tables_len);
510 fw_cfg_add_bytes(fw_cfg, FW_CFG_IRQ0_OVERRIDE, &irq0override, 1);
512 smbios_table = smbios_get_table(&smbios_len);
513 if (smbios_table)
514 fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
515 smbios_table, smbios_len);
516 fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE, (uint8_t *)&e820_table,
517 sizeof(struct e820_table));
519 fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, (uint8_t *)&hpet_cfg,
520 sizeof(struct hpet_fw_config));
521 /* allocate memory for the NUMA channel: one (64bit) word for the number
522 * of nodes, one word for each VCPU->node and one word for each node to
523 * hold the amount of memory.
525 numa_fw_cfg = qemu_mallocz((1 + smp_cpus + nb_numa_nodes) * 8);
526 numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
527 for (i = 0; i < smp_cpus; i++) {
528 for (j = 0; j < nb_numa_nodes; j++) {
529 if (node_cpumask[j] & (1 << i)) {
530 numa_fw_cfg[i + 1] = cpu_to_le64(j);
531 break;
535 for (i = 0; i < nb_numa_nodes; i++) {
536 numa_fw_cfg[smp_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
538 fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
539 (1 + smp_cpus + nb_numa_nodes) * 8);
541 return fw_cfg;
544 static long get_file_size(FILE *f)
546 long where, size;
548 /* XXX: on Unix systems, using fstat() probably makes more sense */
550 where = ftell(f);
551 fseek(f, 0, SEEK_END);
552 size = ftell(f);
553 fseek(f, where, SEEK_SET);
555 return size;
558 static void load_linux(void *fw_cfg,
559 const char *kernel_filename,
560 const char *initrd_filename,
561 const char *kernel_cmdline,
562 target_phys_addr_t max_ram_size)
564 uint16_t protocol;
565 int setup_size, kernel_size, initrd_size = 0, cmdline_size;
566 uint32_t initrd_max;
567 uint8_t header[8192], *setup, *kernel, *initrd_data;
568 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr = 0;
569 FILE *f;
570 char *vmode;
572 /* Align to 16 bytes as a paranoia measure */
573 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
575 /* load the kernel header */
576 f = fopen(kernel_filename, "rb");
577 if (!f || !(kernel_size = get_file_size(f)) ||
578 fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) !=
579 MIN(ARRAY_SIZE(header), kernel_size)) {
580 fprintf(stderr, "qemu: could not load kernel '%s': %s\n",
581 kernel_filename, strerror(errno));
582 exit(1);
585 /* kernel protocol version */
586 #if 0
587 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
588 #endif
589 if (ldl_p(header+0x202) == 0x53726448)
590 protocol = lduw_p(header+0x206);
591 else {
592 /* This looks like a multiboot kernel. If it is, let's stop
593 treating it like a Linux kernel. */
594 if (load_multiboot(fw_cfg, f, kernel_filename, initrd_filename,
595 kernel_cmdline, kernel_size, header))
596 return;
597 protocol = 0;
600 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
601 /* Low kernel */
602 real_addr = 0x90000;
603 cmdline_addr = 0x9a000 - cmdline_size;
604 prot_addr = 0x10000;
605 } else if (protocol < 0x202) {
606 /* High but ancient kernel */
607 real_addr = 0x90000;
608 cmdline_addr = 0x9a000 - cmdline_size;
609 prot_addr = 0x100000;
610 } else {
611 /* High and recent kernel */
612 real_addr = 0x10000;
613 cmdline_addr = 0x20000;
614 prot_addr = 0x100000;
617 #if 0
618 fprintf(stderr,
619 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
620 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
621 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
622 real_addr,
623 cmdline_addr,
624 prot_addr);
625 #endif
627 /* highest address for loading the initrd */
628 if (protocol >= 0x203)
629 initrd_max = ldl_p(header+0x22c);
630 else
631 initrd_max = 0x37ffffff;
633 if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
634 initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
636 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_ADDR, cmdline_addr);
637 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(kernel_cmdline)+1);
638 fw_cfg_add_bytes(fw_cfg, FW_CFG_CMDLINE_DATA,
639 (uint8_t*)strdup(kernel_cmdline),
640 strlen(kernel_cmdline)+1);
642 if (protocol >= 0x202) {
643 stl_p(header+0x228, cmdline_addr);
644 } else {
645 stw_p(header+0x20, 0xA33F);
646 stw_p(header+0x22, cmdline_addr-real_addr);
649 /* handle vga= parameter */
650 vmode = strstr(kernel_cmdline, "vga=");
651 if (vmode) {
652 unsigned int video_mode;
653 /* skip "vga=" */
654 vmode += 4;
655 if (!strncmp(vmode, "normal", 6)) {
656 video_mode = 0xffff;
657 } else if (!strncmp(vmode, "ext", 3)) {
658 video_mode = 0xfffe;
659 } else if (!strncmp(vmode, "ask", 3)) {
660 video_mode = 0xfffd;
661 } else {
662 video_mode = strtol(vmode, NULL, 0);
664 stw_p(header+0x1fa, video_mode);
667 /* loader type */
668 /* High nybble = B reserved for Qemu; low nybble is revision number.
669 If this code is substantially changed, you may want to consider
670 incrementing the revision. */
671 if (protocol >= 0x200)
672 header[0x210] = 0xB0;
674 /* heap */
675 if (protocol >= 0x201) {
676 header[0x211] |= 0x80; /* CAN_USE_HEAP */
677 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
680 /* load initrd */
681 if (initrd_filename) {
682 if (protocol < 0x200) {
683 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
684 exit(1);
687 initrd_size = get_image_size(initrd_filename);
688 if (initrd_size < 0) {
689 fprintf(stderr, "qemu: error reading initrd %s\n",
690 initrd_filename);
691 exit(1);
694 initrd_addr = (initrd_max-initrd_size) & ~4095;
696 initrd_data = qemu_malloc(initrd_size);
697 load_image(initrd_filename, initrd_data);
699 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
700 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
701 fw_cfg_add_bytes(fw_cfg, FW_CFG_INITRD_DATA, initrd_data, initrd_size);
703 stl_p(header+0x218, initrd_addr);
704 stl_p(header+0x21c, initrd_size);
707 /* load kernel and setup */
708 setup_size = header[0x1f1];
709 if (setup_size == 0)
710 setup_size = 4;
711 setup_size = (setup_size+1)*512;
712 kernel_size -= setup_size;
714 setup = qemu_malloc(setup_size);
715 kernel = qemu_malloc(kernel_size);
716 fseek(f, 0, SEEK_SET);
717 if (fread(setup, 1, setup_size, f) != setup_size) {
718 fprintf(stderr, "fread() failed\n");
719 exit(1);
721 if (fread(kernel, 1, kernel_size, f) != kernel_size) {
722 fprintf(stderr, "fread() failed\n");
723 exit(1);
725 fclose(f);
726 memcpy(setup, header, MIN(sizeof(header), setup_size));
728 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, prot_addr);
729 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
730 fw_cfg_add_bytes(fw_cfg, FW_CFG_KERNEL_DATA, kernel, kernel_size);
732 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_ADDR, real_addr);
733 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_SIZE, setup_size);
734 fw_cfg_add_bytes(fw_cfg, FW_CFG_SETUP_DATA, setup, setup_size);
736 option_rom[nb_option_roms] = "linuxboot.bin";
737 nb_option_roms++;
740 #define NE2000_NB_MAX 6
742 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
743 0x280, 0x380 };
744 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
746 static const int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
747 static const int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
749 void pc_audio_init (PCIBus *pci_bus, qemu_irq *pic)
751 struct soundhw *c;
753 for (c = soundhw; c->name; ++c) {
754 if (c->enabled) {
755 if (c->isa) {
756 c->init.init_isa(pic);
757 } else {
758 if (pci_bus) {
759 c->init.init_pci(pci_bus);
766 void pc_init_ne2k_isa(NICInfo *nd)
768 static int nb_ne2k = 0;
770 if (nb_ne2k == NE2000_NB_MAX)
771 return;
772 isa_ne2000_init(ne2000_io[nb_ne2k],
773 ne2000_irq[nb_ne2k], nd);
774 nb_ne2k++;
777 int cpu_is_bsp(CPUState *env)
779 /* We hard-wire the BSP to the first CPU. */
780 return env->cpu_index == 0;
783 DeviceState *cpu_get_current_apic(void)
785 if (cpu_single_env) {
786 return cpu_single_env->apic_state;
787 } else {
788 return NULL;
792 static DeviceState *apic_init(void *env, uint8_t apic_id)
794 DeviceState *dev;
795 SysBusDevice *d;
796 static int apic_mapped;
798 dev = qdev_create(NULL, "apic");
799 qdev_prop_set_uint8(dev, "id", apic_id);
800 qdev_prop_set_ptr(dev, "cpu_env", env);
801 qdev_init_nofail(dev);
802 d = sysbus_from_qdev(dev);
804 /* XXX: mapping more APICs at the same memory location */
805 if (apic_mapped == 0) {
806 /* NOTE: the APIC is directly connected to the CPU - it is not
807 on the global memory bus. */
808 /* XXX: what if the base changes? */
809 sysbus_mmio_map(d, 0, MSI_ADDR_BASE);
810 apic_mapped = 1;
813 msix_supported = 1;
815 return dev;
818 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
819 BIOS will read it and start S3 resume at POST Entry */
820 void pc_cmos_set_s3_resume(void *opaque, int irq, int level)
822 ISADevice *s = opaque;
824 if (level) {
825 rtc_set_memory(s, 0xF, 0xFE);
829 void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
831 CPUState *s = opaque;
833 if (level) {
834 cpu_interrupt(s, CPU_INTERRUPT_SMI);
838 static void pc_cpu_reset(void *opaque)
840 CPUState *env = opaque;
842 cpu_reset(env);
843 env->halted = !cpu_is_bsp(env);
846 static CPUState *pc_new_cpu(const char *cpu_model)
848 CPUState *env;
850 env = cpu_init(cpu_model);
851 if (!env) {
852 fprintf(stderr, "Unable to find x86 CPU definition\n");
853 exit(1);
855 if ((env->cpuid_features & CPUID_APIC) || smp_cpus > 1) {
856 env->cpuid_apic_id = env->cpu_index;
857 env->apic_state = apic_init(env, env->cpuid_apic_id);
859 qemu_register_reset(pc_cpu_reset, env);
860 pc_cpu_reset(env);
861 return env;
864 void pc_cpus_init(const char *cpu_model)
866 int i;
868 /* init CPUs */
869 if (cpu_model == NULL) {
870 #ifdef TARGET_X86_64
871 cpu_model = "qemu64";
872 #else
873 cpu_model = "qemu32";
874 #endif
877 for(i = 0; i < smp_cpus; i++) {
878 pc_new_cpu(cpu_model);
882 void pc_memory_init(ram_addr_t ram_size,
883 const char *kernel_filename,
884 const char *kernel_cmdline,
885 const char *initrd_filename,
886 ram_addr_t *below_4g_mem_size_p,
887 ram_addr_t *above_4g_mem_size_p)
889 char *filename;
890 int ret, linux_boot, i;
891 ram_addr_t ram_addr, bios_offset, option_rom_offset;
892 ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
893 int bios_size, isa_bios_size;
894 void *fw_cfg;
896 if (ram_size >= 0xe0000000 ) {
897 above_4g_mem_size = ram_size - 0xe0000000;
898 below_4g_mem_size = 0xe0000000;
899 } else {
900 below_4g_mem_size = ram_size;
902 *above_4g_mem_size_p = above_4g_mem_size;
903 *below_4g_mem_size_p = below_4g_mem_size;
905 #if TARGET_PHYS_ADDR_BITS == 32
906 if (above_4g_mem_size > 0) {
907 hw_error("To much RAM for 32-bit physical address");
909 #endif
910 linux_boot = (kernel_filename != NULL);
912 /* allocate RAM */
913 ram_addr = qemu_ram_alloc(NULL, "pc.ram",
914 below_4g_mem_size + above_4g_mem_size);
915 cpu_register_physical_memory(0, 0xa0000, ram_addr);
916 cpu_register_physical_memory(0x100000,
917 below_4g_mem_size - 0x100000,
918 ram_addr + 0x100000);
919 #if TARGET_PHYS_ADDR_BITS > 32
920 if (above_4g_mem_size > 0) {
921 cpu_register_physical_memory(0x100000000ULL, above_4g_mem_size,
922 ram_addr + below_4g_mem_size);
924 #endif
926 /* BIOS load */
927 if (bios_name == NULL)
928 bios_name = BIOS_FILENAME;
929 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
930 if (filename) {
931 bios_size = get_image_size(filename);
932 } else {
933 bios_size = -1;
935 if (bios_size <= 0 ||
936 (bios_size % 65536) != 0) {
937 goto bios_error;
939 bios_offset = qemu_ram_alloc(NULL, "pc.bios", bios_size);
940 ret = rom_add_file_fixed(bios_name, (uint32_t)(-bios_size));
941 if (ret != 0) {
942 bios_error:
943 fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
944 exit(1);
946 if (filename) {
947 qemu_free(filename);
949 /* map the last 128KB of the BIOS in ISA space */
950 isa_bios_size = bios_size;
951 if (isa_bios_size > (128 * 1024))
952 isa_bios_size = 128 * 1024;
953 cpu_register_physical_memory(0x100000 - isa_bios_size,
954 isa_bios_size,
955 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
957 option_rom_offset = qemu_ram_alloc(NULL, "pc.rom", PC_ROM_SIZE);
958 cpu_register_physical_memory(PC_ROM_MIN_VGA, PC_ROM_SIZE, option_rom_offset);
960 /* map all the bios at the top of memory */
961 cpu_register_physical_memory((uint32_t)(-bios_size),
962 bios_size, bios_offset | IO_MEM_ROM);
964 fw_cfg = bochs_bios_init();
965 rom_set_fw(fw_cfg);
967 if (linux_boot) {
968 load_linux(fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
971 for (i = 0; i < nb_option_roms; i++) {
972 rom_add_option(option_rom[i]);
976 qemu_irq *pc_allocate_cpu_irq(void)
978 return qemu_allocate_irqs(pic_irq_request, NULL, 1);
981 void pc_vga_init(PCIBus *pci_bus)
983 if (cirrus_vga_enabled) {
984 if (pci_bus) {
985 pci_cirrus_vga_init(pci_bus);
986 } else {
987 isa_cirrus_vga_init();
989 } else if (vmsvga_enabled) {
990 if (pci_bus)
991 pci_vmsvga_init(pci_bus);
992 else
993 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
994 } else if (std_vga_enabled) {
995 if (pci_bus) {
996 pci_vga_init(pci_bus, 0, 0);
997 } else {
998 isa_vga_init();
1003 static void cpu_request_exit(void *opaque, int irq, int level)
1005 CPUState *env = cpu_single_env;
1007 if (env && level) {
1008 cpu_exit(env);
1012 void pc_basic_device_init(qemu_irq *isa_irq,
1013 FDCtrl **floppy_controller,
1014 ISADevice **rtc_state)
1016 int i;
1017 DriveInfo *fd[MAX_FD];
1018 PITState *pit;
1019 qemu_irq rtc_irq = NULL;
1020 qemu_irq *a20_line;
1021 ISADevice *i8042;
1022 qemu_irq *cpu_exit_irq;
1024 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
1026 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
1028 if (!no_hpet) {
1029 DeviceState *hpet = sysbus_create_simple("hpet", HPET_BASE, NULL);
1031 for (i = 0; i < 24; i++) {
1032 sysbus_connect_irq(sysbus_from_qdev(hpet), i, isa_irq[i]);
1034 rtc_irq = qdev_get_gpio_in(hpet, 0);
1036 *rtc_state = rtc_init(2000, rtc_irq);
1038 qemu_register_boot_set(pc_boot_set, *rtc_state);
1040 pit = pit_init(0x40, isa_reserve_irq(0));
1041 pcspk_init(pit);
1043 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
1044 if (serial_hds[i]) {
1045 serial_isa_init(i, serial_hds[i]);
1049 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
1050 if (parallel_hds[i]) {
1051 parallel_init(i, parallel_hds[i]);
1055 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 1);
1056 i8042 = isa_create_simple("i8042");
1057 i8042_setup_a20_line(i8042, a20_line);
1058 vmmouse_init(i8042);
1060 cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
1061 DMA_init(0, cpu_exit_irq);
1063 for(i = 0; i < MAX_FD; i++) {
1064 fd[i] = drive_get(IF_FLOPPY, 0, i);
1066 *floppy_controller = fdctrl_init_isa(fd);
1069 void pc_pci_device_init(PCIBus *pci_bus)
1071 int max_bus;
1072 int bus;
1074 max_bus = drive_get_max_bus(IF_SCSI);
1075 for (bus = 0; bus <= max_bus; bus++) {
1076 pci_create_simple(pci_bus, -1, "lsi53c895a");