hw/misc/max111x.c

   1 /*
   2  * Maxim MAX1110/1111 ADC chip emulation.
   3  *
   4  * Copyright (c) 2006 Openedhand Ltd.
   5  * Written by Andrzej Zaborowski <balrog@zabor.org>
   6  *
   7  * This code is licensed under the GNU GPLv2.
   8  *
   9  * Contributions after 2012-01-13 are licensed under the terms of the
  10  * GNU GPL, version 2 or (at your option) any later version.
  11  */
  12
  13 #include "qemu/osdep.h"
  14 #include "hw/ssi/ssi.h"
  15
  16 typedef struct {
  17     SSISlave parent_obj;
  18
  19     qemu_irq interrupt;
  20     uint8_t tb1, rb2, rb3;
  21     int cycle;
  22
  23     uint8_t input[8];
  24     int inputs, com;
  25 } MAX111xState;
  26
  27 #define TYPE_MAX_111X "max111x"
  28
  29 #define MAX_111X(obj) \
  30     OBJECT_CHECK(MAX111xState, (obj), TYPE_MAX_111X)
  31
  32 #define TYPE_MAX_1110 "max1110"
  33 #define TYPE_MAX_1111 "max1111"
  34
  35 /* Control-byte bitfields */
  36 #define CB_PD0          (1 << 0)
  37 #define CB_PD1          (1 << 1)
  38 #define CB_SGL          (1 << 2)
  39 #define CB_UNI          (1 << 3)
  40 #define CB_SEL0         (1 << 4)
  41 #define CB_SEL1         (1 << 5)
  42 #define CB_SEL2         (1 << 6)
  43 #define CB_START        (1 << 7)
  44
  45 #define CHANNEL_NUM(v, b0, b1, b2)      \
  46                         ((((v) >> (2 + (b0))) & 4) |    \
  47                          (((v) >> (3 + (b1))) & 2) |    \
  48                          (((v) >> (4 + (b2))) & 1))
  49
  50 static uint32_t max111x_read(MAX111xState *s)
  51 {
  52     if (!s->tb1)
  53         return 0;
  54
  55     switch (s->cycle ++) {
  56     case 1:
  57         return s->rb2;
  58     case 2:
  59         return s->rb3;
  60     }
  61
  62     return 0;
  63 }
  64
  65 /* Interpret a control-byte */
  66 static void max111x_write(MAX111xState *s, uint32_t value)
  67 {
  68     int measure, chan;
  69
  70     /* Ignore the value if START bit is zero */
  71     if (!(value & CB_START))
  72         return;
  73
  74     s->cycle = 0;
  75
  76     if (!(value & CB_PD1)) {
  77         s->tb1 = 0;
  78         return;
  79     }
  80
  81     s->tb1 = value;
  82
  83     if (s->inputs == 8)
  84         chan = CHANNEL_NUM(value, 1, 0, 2);
  85     else
  86         chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2);
  87
  88     if (value & CB_SGL)
  89         measure = s->input[chan] - s->com;
  90     else
  91         measure = s->input[chan] - s->input[chan ^ 1];
  92
  93     if (!(value & CB_UNI))
  94         measure ^= 0x80;
  95
  96     s->rb2 = (measure >> 2) & 0x3f;
  97     s->rb3 = (measure << 6) & 0xc0;
  98
  99     /* FIXME: When should the IRQ be lowered?  */
 100     qemu_irq_raise(s->interrupt);
 101 }
 102
 103 static uint32_t max111x_transfer(SSISlave *dev, uint32_t value)
 104 {
 105     MAX111xState *s = MAX_111X(dev);
 106     max111x_write(s, value);
 107     return max111x_read(s);
 108 }
 109
 110 static const VMStateDescription vmstate_max111x = {
 111     .name = "max111x",
 112     .version_id = 1,
 113     .minimum_version_id = 1,
 114     .fields = (VMStateField[]) {
 115         VMSTATE_SSI_SLAVE(parent_obj, MAX111xState),
 116         VMSTATE_UINT8(tb1, MAX111xState),
 117         VMSTATE_UINT8(rb2, MAX111xState),
 118         VMSTATE_UINT8(rb3, MAX111xState),
 119         VMSTATE_INT32_EQUAL(inputs, MAX111xState),
 120         VMSTATE_INT32(com, MAX111xState),
 121         VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs,
 122                                    vmstate_info_uint8, uint8_t),
 123         VMSTATE_END_OF_LIST()
 124     }
 125 };
 126
 127 static int max111x_init(SSISlave *d, int inputs)
 128 {
 129     DeviceState *dev = DEVICE(d);
 130     MAX111xState *s = MAX_111X(dev);
 131
 132     qdev_init_gpio_out(dev, &s->interrupt, 1);
 133
 134     s->inputs = inputs;
 135     /* TODO: add a user interface for setting these */
 136     s->input[0] = 0xf0;
 137     s->input[1] = 0xe0;
 138     s->input[2] = 0xd0;
 139     s->input[3] = 0xc0;
 140     s->input[4] = 0xb0;
 141     s->input[5] = 0xa0;
 142     s->input[6] = 0x90;
 143     s->input[7] = 0x80;
 144     s->com = 0;
 145
 146     vmstate_register(dev, -1, &vmstate_max111x, s);
 147     return 0;
 148 }
 149
 150 static void max1110_realize(SSISlave *dev, Error **errp)
 151 {
 152     max111x_init(dev, 8);
 153 }
 154
 155 static void max1111_realize(SSISlave *dev, Error **errp)
 156 {
 157     max111x_init(dev, 4);
 158 }
 159
 160 void max111x_set_input(DeviceState *dev, int line, uint8_t value)
 161 {
 162     MAX111xState *s = MAX_111X(dev);
 163     assert(line >= 0 && line < s->inputs);
 164     s->input[line] = value;
 165 }
 166
 167 static void max111x_class_init(ObjectClass *klass, void *data)
 168 {
 169     SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
 170
 171     k->transfer = max111x_transfer;
 172 }
 173
 174 static const TypeInfo max111x_info = {
 175     .name          = TYPE_MAX_111X,
 176     .parent        = TYPE_SSI_SLAVE,
 177     .instance_size = sizeof(MAX111xState),
 178     .class_init    = max111x_class_init,
 179     .abstract      = true,
 180 };
 181
 182 static void max1110_class_init(ObjectClass *klass, void *data)
 183 {
 184     SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
 185
 186     k->realize = max1110_realize;
 187 }
 188
 189 static const TypeInfo max1110_info = {
 190     .name          = TYPE_MAX_1110,
 191     .parent        = TYPE_MAX_111X,
 192     .class_init    = max1110_class_init,
 193 };
 194
 195 static void max1111_class_init(ObjectClass *klass, void *data)
 196 {
 197     SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
 198
 199     k->realize = max1111_realize;
 200 }
 201
 202 static const TypeInfo max1111_info = {
 203     .name          = TYPE_MAX_1111,
 204     .parent        = TYPE_MAX_111X,
 205     .class_init    = max1111_class_init,
 206 };
 207
 208 static void max111x_register_types(void)
 209 {
 210     type_register_static(&max111x_info);
 211     type_register_static(&max1110_info);
 212     type_register_static(&max1111_info);
 213 }
 214
 215 type_init(max111x_register_types)