pc-bios/s390-ccw: detect CC options just once
[qemu.git] / hw / scsi / esp.c
blob2ff18ce50087cc469768c66c2e531ea58ff2f94d
1 /*
2 * QEMU ESP/NCR53C9x emulation
4 * Copyright (c) 2005-2006 Fabrice Bellard
5 * Copyright (c) 2012 Herve Poussineau
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23 * THE SOFTWARE.
26 #include "qemu/osdep.h"
27 #include "hw/sysbus.h"
28 #include "migration/vmstate.h"
29 #include "hw/irq.h"
30 #include "hw/scsi/esp.h"
31 #include "trace.h"
32 #include "qemu/log.h"
33 #include "qemu/module.h"
36 * On Sparc32, this is the ESP (NCR53C90) part of chip STP2000 (Master I/O),
37 * also produced as NCR89C100. See
38 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
39 * and
40 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
42 * On Macintosh Quadra it is a NCR53C96.
45 static void esp_raise_irq(ESPState *s)
47 if (!(s->rregs[ESP_RSTAT] & STAT_INT)) {
48 s->rregs[ESP_RSTAT] |= STAT_INT;
49 qemu_irq_raise(s->irq);
50 trace_esp_raise_irq();
54 static void esp_lower_irq(ESPState *s)
56 if (s->rregs[ESP_RSTAT] & STAT_INT) {
57 s->rregs[ESP_RSTAT] &= ~STAT_INT;
58 qemu_irq_lower(s->irq);
59 trace_esp_lower_irq();
63 static void esp_raise_drq(ESPState *s)
65 qemu_irq_raise(s->irq_data);
66 trace_esp_raise_drq();
69 static void esp_lower_drq(ESPState *s)
71 qemu_irq_lower(s->irq_data);
72 trace_esp_lower_drq();
75 void esp_dma_enable(ESPState *s, int irq, int level)
77 if (level) {
78 s->dma_enabled = 1;
79 trace_esp_dma_enable();
80 if (s->dma_cb) {
81 s->dma_cb(s);
82 s->dma_cb = NULL;
84 } else {
85 trace_esp_dma_disable();
86 s->dma_enabled = 0;
90 void esp_request_cancelled(SCSIRequest *req)
92 ESPState *s = req->hba_private;
94 if (req == s->current_req) {
95 scsi_req_unref(s->current_req);
96 s->current_req = NULL;
97 s->current_dev = NULL;
98 s->async_len = 0;
102 static void esp_fifo_push(Fifo8 *fifo, uint8_t val)
104 if (fifo8_num_used(fifo) == fifo->capacity) {
105 trace_esp_error_fifo_overrun();
106 return;
109 fifo8_push(fifo, val);
112 static uint8_t esp_fifo_pop(Fifo8 *fifo)
114 if (fifo8_is_empty(fifo)) {
115 return 0;
118 return fifo8_pop(fifo);
121 static uint32_t esp_fifo_pop_buf(Fifo8 *fifo, uint8_t *dest, int maxlen)
123 const uint8_t *buf;
124 uint32_t n;
126 if (maxlen == 0) {
127 return 0;
130 buf = fifo8_pop_buf(fifo, maxlen, &n);
131 if (dest) {
132 memcpy(dest, buf, n);
135 return n;
138 static uint32_t esp_get_tc(ESPState *s)
140 uint32_t dmalen;
142 dmalen = s->rregs[ESP_TCLO];
143 dmalen |= s->rregs[ESP_TCMID] << 8;
144 dmalen |= s->rregs[ESP_TCHI] << 16;
146 return dmalen;
149 static void esp_set_tc(ESPState *s, uint32_t dmalen)
151 s->rregs[ESP_TCLO] = dmalen;
152 s->rregs[ESP_TCMID] = dmalen >> 8;
153 s->rregs[ESP_TCHI] = dmalen >> 16;
156 static uint32_t esp_get_stc(ESPState *s)
158 uint32_t dmalen;
160 dmalen = s->wregs[ESP_TCLO];
161 dmalen |= s->wregs[ESP_TCMID] << 8;
162 dmalen |= s->wregs[ESP_TCHI] << 16;
164 return dmalen;
167 static uint8_t esp_pdma_read(ESPState *s)
169 uint8_t val;
171 if (s->do_cmd) {
172 val = esp_fifo_pop(&s->cmdfifo);
173 } else {
174 val = esp_fifo_pop(&s->fifo);
177 return val;
180 static void esp_pdma_write(ESPState *s, uint8_t val)
182 uint32_t dmalen = esp_get_tc(s);
184 if (dmalen == 0) {
185 return;
188 if (s->do_cmd) {
189 esp_fifo_push(&s->cmdfifo, val);
190 } else {
191 esp_fifo_push(&s->fifo, val);
194 dmalen--;
195 esp_set_tc(s, dmalen);
198 static void esp_set_pdma_cb(ESPState *s, enum pdma_cb cb)
200 s->pdma_cb = cb;
203 static int esp_select(ESPState *s)
205 int target;
207 target = s->wregs[ESP_WBUSID] & BUSID_DID;
209 s->ti_size = 0;
210 fifo8_reset(&s->fifo);
212 s->current_dev = scsi_device_find(&s->bus, 0, target, 0);
213 if (!s->current_dev) {
214 /* No such drive */
215 s->rregs[ESP_RSTAT] = 0;
216 s->rregs[ESP_RINTR] = INTR_DC;
217 s->rregs[ESP_RSEQ] = SEQ_0;
218 esp_raise_irq(s);
219 return -1;
223 * Note that we deliberately don't raise the IRQ here: this will be done
224 * either in do_command_phase() for DATA OUT transfers or by the deferred
225 * IRQ mechanism in esp_transfer_data() for DATA IN transfers
227 s->rregs[ESP_RINTR] |= INTR_FC;
228 s->rregs[ESP_RSEQ] = SEQ_CD;
229 return 0;
232 static uint32_t get_cmd(ESPState *s, uint32_t maxlen)
234 uint8_t buf[ESP_CMDFIFO_SZ];
235 uint32_t dmalen, n;
236 int target;
238 if (s->current_req) {
239 /* Started a new command before the old one finished. Cancel it. */
240 scsi_req_cancel(s->current_req);
243 target = s->wregs[ESP_WBUSID] & BUSID_DID;
244 if (s->dma) {
245 dmalen = MIN(esp_get_tc(s), maxlen);
246 if (dmalen == 0) {
247 return 0;
249 if (s->dma_memory_read) {
250 s->dma_memory_read(s->dma_opaque, buf, dmalen);
251 dmalen = MIN(fifo8_num_free(&s->cmdfifo), dmalen);
252 fifo8_push_all(&s->cmdfifo, buf, dmalen);
253 } else {
254 if (esp_select(s) < 0) {
255 fifo8_reset(&s->cmdfifo);
256 return -1;
258 esp_raise_drq(s);
259 fifo8_reset(&s->cmdfifo);
260 return 0;
262 } else {
263 dmalen = MIN(fifo8_num_used(&s->fifo), maxlen);
264 if (dmalen == 0) {
265 return 0;
267 n = esp_fifo_pop_buf(&s->fifo, buf, dmalen);
268 n = MIN(fifo8_num_free(&s->cmdfifo), n);
269 fifo8_push_all(&s->cmdfifo, buf, n);
271 trace_esp_get_cmd(dmalen, target);
273 if (esp_select(s) < 0) {
274 fifo8_reset(&s->cmdfifo);
275 return -1;
277 return dmalen;
280 static void do_command_phase(ESPState *s)
282 uint32_t cmdlen;
283 int32_t datalen;
284 SCSIDevice *current_lun;
285 uint8_t buf[ESP_CMDFIFO_SZ];
287 trace_esp_do_command_phase(s->lun);
288 cmdlen = fifo8_num_used(&s->cmdfifo);
289 if (!cmdlen || !s->current_dev) {
290 return;
292 esp_fifo_pop_buf(&s->cmdfifo, buf, cmdlen);
294 current_lun = scsi_device_find(&s->bus, 0, s->current_dev->id, s->lun);
295 s->current_req = scsi_req_new(current_lun, 0, s->lun, buf, cmdlen, s);
296 datalen = scsi_req_enqueue(s->current_req);
297 s->ti_size = datalen;
298 fifo8_reset(&s->cmdfifo);
299 if (datalen != 0) {
300 s->rregs[ESP_RSTAT] = STAT_TC;
301 s->rregs[ESP_RSEQ] = SEQ_CD;
302 s->ti_cmd = 0;
303 esp_set_tc(s, 0);
304 if (datalen > 0) {
306 * Switch to DATA IN phase but wait until initial data xfer is
307 * complete before raising the command completion interrupt
309 s->data_in_ready = false;
310 s->rregs[ESP_RSTAT] |= STAT_DI;
311 } else {
312 s->rregs[ESP_RSTAT] |= STAT_DO;
313 s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
314 esp_raise_irq(s);
315 esp_lower_drq(s);
317 scsi_req_continue(s->current_req);
318 return;
322 static void do_message_phase(ESPState *s)
324 if (s->cmdfifo_cdb_offset) {
325 uint8_t message = esp_fifo_pop(&s->cmdfifo);
327 trace_esp_do_identify(message);
328 s->lun = message & 7;
329 s->cmdfifo_cdb_offset--;
332 /* Ignore extended messages for now */
333 if (s->cmdfifo_cdb_offset) {
334 int len = MIN(s->cmdfifo_cdb_offset, fifo8_num_used(&s->cmdfifo));
335 esp_fifo_pop_buf(&s->cmdfifo, NULL, len);
336 s->cmdfifo_cdb_offset = 0;
340 static void do_cmd(ESPState *s)
342 do_message_phase(s);
343 assert(s->cmdfifo_cdb_offset == 0);
344 do_command_phase(s);
347 static void satn_pdma_cb(ESPState *s)
349 if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
350 s->cmdfifo_cdb_offset = 1;
351 s->do_cmd = 0;
352 do_cmd(s);
356 static void handle_satn(ESPState *s)
358 int32_t cmdlen;
360 if (s->dma && !s->dma_enabled) {
361 s->dma_cb = handle_satn;
362 return;
364 esp_set_pdma_cb(s, SATN_PDMA_CB);
365 cmdlen = get_cmd(s, ESP_CMDFIFO_SZ);
366 if (cmdlen > 0) {
367 s->cmdfifo_cdb_offset = 1;
368 s->do_cmd = 0;
369 do_cmd(s);
370 } else if (cmdlen == 0) {
371 s->do_cmd = 1;
372 /* Target present, but no cmd yet - switch to command phase */
373 s->rregs[ESP_RSEQ] = SEQ_CD;
374 s->rregs[ESP_RSTAT] = STAT_CD;
378 static void s_without_satn_pdma_cb(ESPState *s)
380 if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
381 s->cmdfifo_cdb_offset = 0;
382 s->do_cmd = 0;
383 do_cmd(s);
387 static void handle_s_without_atn(ESPState *s)
389 int32_t cmdlen;
391 if (s->dma && !s->dma_enabled) {
392 s->dma_cb = handle_s_without_atn;
393 return;
395 esp_set_pdma_cb(s, S_WITHOUT_SATN_PDMA_CB);
396 cmdlen = get_cmd(s, ESP_CMDFIFO_SZ);
397 if (cmdlen > 0) {
398 s->cmdfifo_cdb_offset = 0;
399 s->do_cmd = 0;
400 do_cmd(s);
401 } else if (cmdlen == 0) {
402 s->do_cmd = 1;
403 /* Target present, but no cmd yet - switch to command phase */
404 s->rregs[ESP_RSEQ] = SEQ_CD;
405 s->rregs[ESP_RSTAT] = STAT_CD;
409 static void satn_stop_pdma_cb(ESPState *s)
411 if (!esp_get_tc(s) && !fifo8_is_empty(&s->cmdfifo)) {
412 trace_esp_handle_satn_stop(fifo8_num_used(&s->cmdfifo));
413 s->do_cmd = 1;
414 s->cmdfifo_cdb_offset = 1;
415 s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
416 s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
417 s->rregs[ESP_RSEQ] = SEQ_CD;
418 esp_raise_irq(s);
422 static void handle_satn_stop(ESPState *s)
424 int32_t cmdlen;
426 if (s->dma && !s->dma_enabled) {
427 s->dma_cb = handle_satn_stop;
428 return;
430 esp_set_pdma_cb(s, SATN_STOP_PDMA_CB);
431 cmdlen = get_cmd(s, 1);
432 if (cmdlen > 0) {
433 trace_esp_handle_satn_stop(fifo8_num_used(&s->cmdfifo));
434 s->do_cmd = 1;
435 s->cmdfifo_cdb_offset = 1;
436 s->rregs[ESP_RSTAT] = STAT_MO;
437 s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
438 s->rregs[ESP_RSEQ] = SEQ_MO;
439 esp_raise_irq(s);
440 } else if (cmdlen == 0) {
441 s->do_cmd = 1;
442 /* Target present, switch to message out phase */
443 s->rregs[ESP_RSEQ] = SEQ_MO;
444 s->rregs[ESP_RSTAT] = STAT_MO;
448 static void write_response_pdma_cb(ESPState *s)
450 s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
451 s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
452 s->rregs[ESP_RSEQ] = SEQ_CD;
453 esp_raise_irq(s);
456 static void write_response(ESPState *s)
458 uint8_t buf[2];
460 trace_esp_write_response(s->status);
462 buf[0] = s->status;
463 buf[1] = 0;
465 if (s->dma) {
466 if (s->dma_memory_write) {
467 s->dma_memory_write(s->dma_opaque, buf, 2);
468 s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
469 s->rregs[ESP_RINTR] |= INTR_BS | INTR_FC;
470 s->rregs[ESP_RSEQ] = SEQ_CD;
471 } else {
472 esp_set_pdma_cb(s, WRITE_RESPONSE_PDMA_CB);
473 esp_raise_drq(s);
474 return;
476 } else {
477 fifo8_reset(&s->fifo);
478 fifo8_push_all(&s->fifo, buf, 2);
479 s->rregs[ESP_RFLAGS] = 2;
481 esp_raise_irq(s);
484 static void esp_dma_done(ESPState *s)
486 s->rregs[ESP_RSTAT] |= STAT_TC;
487 s->rregs[ESP_RINTR] |= INTR_BS;
488 s->rregs[ESP_RFLAGS] = 0;
489 esp_set_tc(s, 0);
490 esp_raise_irq(s);
493 static void do_dma_pdma_cb(ESPState *s)
495 int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
496 int len;
497 uint32_t n;
499 if (s->do_cmd) {
500 /* Ensure we have received complete command after SATN and stop */
501 if (esp_get_tc(s) || fifo8_is_empty(&s->cmdfifo)) {
502 return;
505 s->ti_size = 0;
506 if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
507 /* No command received */
508 if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
509 return;
512 /* Command has been received */
513 s->do_cmd = 0;
514 do_cmd(s);
515 } else {
517 * Extra message out bytes received: update cmdfifo_cdb_offset
518 * and then switch to commmand phase
520 s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
521 s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
522 s->rregs[ESP_RSEQ] = SEQ_CD;
523 s->rregs[ESP_RINTR] |= INTR_BS;
524 esp_raise_irq(s);
526 return;
529 if (!s->current_req) {
530 return;
533 if (to_device) {
534 /* Copy FIFO data to device */
535 len = MIN(s->async_len, ESP_FIFO_SZ);
536 len = MIN(len, fifo8_num_used(&s->fifo));
537 n = esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
538 s->async_buf += n;
539 s->async_len -= n;
540 s->ti_size += n;
542 if (n < len) {
543 /* Unaligned accesses can cause FIFO wraparound */
544 len = len - n;
545 n = esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
546 s->async_buf += n;
547 s->async_len -= n;
548 s->ti_size += n;
551 if (s->async_len == 0) {
552 scsi_req_continue(s->current_req);
553 return;
556 if (esp_get_tc(s) == 0) {
557 esp_lower_drq(s);
558 esp_dma_done(s);
561 return;
562 } else {
563 if (s->async_len == 0) {
564 /* Defer until the scsi layer has completed */
565 scsi_req_continue(s->current_req);
566 s->data_in_ready = false;
567 return;
570 if (esp_get_tc(s) != 0) {
571 /* Copy device data to FIFO */
572 len = MIN(s->async_len, esp_get_tc(s));
573 len = MIN(len, fifo8_num_free(&s->fifo));
574 fifo8_push_all(&s->fifo, s->async_buf, len);
575 s->async_buf += len;
576 s->async_len -= len;
577 s->ti_size -= len;
578 esp_set_tc(s, esp_get_tc(s) - len);
580 if (esp_get_tc(s) == 0) {
581 /* Indicate transfer to FIFO is complete */
582 s->rregs[ESP_RSTAT] |= STAT_TC;
584 return;
587 /* Partially filled a scsi buffer. Complete immediately. */
588 esp_lower_drq(s);
589 esp_dma_done(s);
593 static void esp_do_dma(ESPState *s)
595 uint32_t len, cmdlen;
596 int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
597 uint8_t buf[ESP_CMDFIFO_SZ];
599 len = esp_get_tc(s);
600 if (s->do_cmd) {
602 * handle_ti_cmd() case: esp_do_dma() is called only from
603 * handle_ti_cmd() with do_cmd != NULL (see the assert())
605 cmdlen = fifo8_num_used(&s->cmdfifo);
606 trace_esp_do_dma(cmdlen, len);
607 if (s->dma_memory_read) {
608 len = MIN(len, fifo8_num_free(&s->cmdfifo));
609 s->dma_memory_read(s->dma_opaque, buf, len);
610 fifo8_push_all(&s->cmdfifo, buf, len);
611 } else {
612 esp_set_pdma_cb(s, DO_DMA_PDMA_CB);
613 esp_raise_drq(s);
614 return;
616 trace_esp_handle_ti_cmd(cmdlen);
617 s->ti_size = 0;
618 if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
619 /* No command received */
620 if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
621 return;
624 /* Command has been received */
625 s->do_cmd = 0;
626 do_cmd(s);
627 } else {
629 * Extra message out bytes received: update cmdfifo_cdb_offset
630 * and then switch to commmand phase
632 s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
633 s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
634 s->rregs[ESP_RSEQ] = SEQ_CD;
635 s->rregs[ESP_RINTR] |= INTR_BS;
636 esp_raise_irq(s);
638 return;
640 if (!s->current_req) {
641 return;
643 if (s->async_len == 0) {
644 /* Defer until data is available. */
645 return;
647 if (len > s->async_len) {
648 len = s->async_len;
650 if (to_device) {
651 if (s->dma_memory_read) {
652 s->dma_memory_read(s->dma_opaque, s->async_buf, len);
653 } else {
654 esp_set_pdma_cb(s, DO_DMA_PDMA_CB);
655 esp_raise_drq(s);
656 return;
658 } else {
659 if (s->dma_memory_write) {
660 s->dma_memory_write(s->dma_opaque, s->async_buf, len);
661 } else {
662 /* Adjust TC for any leftover data in the FIFO */
663 if (!fifo8_is_empty(&s->fifo)) {
664 esp_set_tc(s, esp_get_tc(s) - fifo8_num_used(&s->fifo));
667 /* Copy device data to FIFO */
668 len = MIN(len, fifo8_num_free(&s->fifo));
669 fifo8_push_all(&s->fifo, s->async_buf, len);
670 s->async_buf += len;
671 s->async_len -= len;
672 s->ti_size -= len;
675 * MacOS toolbox uses a TI length of 16 bytes for all commands, so
676 * commands shorter than this must be padded accordingly
678 if (len < esp_get_tc(s) && esp_get_tc(s) <= ESP_FIFO_SZ) {
679 while (fifo8_num_used(&s->fifo) < ESP_FIFO_SZ) {
680 esp_fifo_push(&s->fifo, 0);
681 len++;
685 esp_set_tc(s, esp_get_tc(s) - len);
686 esp_set_pdma_cb(s, DO_DMA_PDMA_CB);
687 esp_raise_drq(s);
689 /* Indicate transfer to FIFO is complete */
690 s->rregs[ESP_RSTAT] |= STAT_TC;
691 return;
694 esp_set_tc(s, esp_get_tc(s) - len);
695 s->async_buf += len;
696 s->async_len -= len;
697 if (to_device) {
698 s->ti_size += len;
699 } else {
700 s->ti_size -= len;
702 if (s->async_len == 0) {
703 scsi_req_continue(s->current_req);
705 * If there is still data to be read from the device then
706 * complete the DMA operation immediately. Otherwise defer
707 * until the scsi layer has completed.
709 if (to_device || esp_get_tc(s) != 0 || s->ti_size == 0) {
710 return;
714 /* Partially filled a scsi buffer. Complete immediately. */
715 esp_dma_done(s);
716 esp_lower_drq(s);
719 static void esp_do_nodma(ESPState *s)
721 int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
722 uint32_t cmdlen;
723 int len;
725 if (s->do_cmd) {
726 cmdlen = fifo8_num_used(&s->cmdfifo);
727 trace_esp_handle_ti_cmd(cmdlen);
728 s->ti_size = 0;
729 if ((s->rregs[ESP_RSTAT] & 7) == STAT_CD) {
730 /* No command received */
731 if (s->cmdfifo_cdb_offset == fifo8_num_used(&s->cmdfifo)) {
732 return;
735 /* Command has been received */
736 s->do_cmd = 0;
737 do_cmd(s);
738 } else {
740 * Extra message out bytes received: update cmdfifo_cdb_offset
741 * and then switch to commmand phase
743 s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
744 s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
745 s->rregs[ESP_RSEQ] = SEQ_CD;
746 s->rregs[ESP_RINTR] |= INTR_BS;
747 esp_raise_irq(s);
749 return;
752 if (!s->current_req) {
753 return;
756 if (s->async_len == 0) {
757 /* Defer until data is available. */
758 return;
761 if (to_device) {
762 len = MIN(fifo8_num_used(&s->fifo), ESP_FIFO_SZ);
763 esp_fifo_pop_buf(&s->fifo, s->async_buf, len);
764 s->async_buf += len;
765 s->async_len -= len;
766 s->ti_size += len;
767 } else {
768 if (fifo8_is_empty(&s->fifo)) {
769 fifo8_push(&s->fifo, s->async_buf[0]);
770 s->async_buf++;
771 s->async_len--;
772 s->ti_size--;
776 if (s->async_len == 0) {
777 scsi_req_continue(s->current_req);
778 return;
781 s->rregs[ESP_RINTR] |= INTR_BS;
782 esp_raise_irq(s);
785 static void esp_pdma_cb(ESPState *s)
787 switch (s->pdma_cb) {
788 case SATN_PDMA_CB:
789 satn_pdma_cb(s);
790 break;
791 case S_WITHOUT_SATN_PDMA_CB:
792 s_without_satn_pdma_cb(s);
793 break;
794 case SATN_STOP_PDMA_CB:
795 satn_stop_pdma_cb(s);
796 break;
797 case WRITE_RESPONSE_PDMA_CB:
798 write_response_pdma_cb(s);
799 break;
800 case DO_DMA_PDMA_CB:
801 do_dma_pdma_cb(s);
802 break;
803 default:
804 g_assert_not_reached();
808 void esp_command_complete(SCSIRequest *req, size_t resid)
810 ESPState *s = req->hba_private;
811 int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
813 trace_esp_command_complete();
816 * Non-DMA transfers from the target will leave the last byte in
817 * the FIFO so don't reset ti_size in this case
819 if (s->dma || to_device) {
820 if (s->ti_size != 0) {
821 trace_esp_command_complete_unexpected();
823 s->ti_size = 0;
826 s->async_len = 0;
827 if (req->status) {
828 trace_esp_command_complete_fail();
830 s->status = req->status;
833 * If the transfer is finished, switch to status phase. For non-DMA
834 * transfers from the target the last byte is still in the FIFO
836 if (s->ti_size == 0) {
837 s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
838 esp_dma_done(s);
839 esp_lower_drq(s);
842 if (s->current_req) {
843 scsi_req_unref(s->current_req);
844 s->current_req = NULL;
845 s->current_dev = NULL;
849 void esp_transfer_data(SCSIRequest *req, uint32_t len)
851 ESPState *s = req->hba_private;
852 int to_device = ((s->rregs[ESP_RSTAT] & 7) == STAT_DO);
853 uint32_t dmalen = esp_get_tc(s);
855 assert(!s->do_cmd);
856 trace_esp_transfer_data(dmalen, s->ti_size);
857 s->async_len = len;
858 s->async_buf = scsi_req_get_buf(req);
860 if (!to_device && !s->data_in_ready) {
862 * Initial incoming data xfer is complete so raise command
863 * completion interrupt
865 s->data_in_ready = true;
866 s->rregs[ESP_RSTAT] |= STAT_TC;
867 s->rregs[ESP_RINTR] |= INTR_BS;
868 esp_raise_irq(s);
871 if (s->ti_cmd == 0) {
873 * Always perform the initial transfer upon reception of the next TI
874 * command to ensure the DMA/non-DMA status of the command is correct.
875 * It is not possible to use s->dma directly in the section below as
876 * some OSs send non-DMA NOP commands after a DMA transfer. Hence if the
877 * async data transfer is delayed then s->dma is set incorrectly.
879 return;
882 if (s->ti_cmd == (CMD_TI | CMD_DMA)) {
883 if (dmalen) {
884 esp_do_dma(s);
885 } else if (s->ti_size <= 0) {
887 * If this was the last part of a DMA transfer then the
888 * completion interrupt is deferred to here.
890 esp_dma_done(s);
891 esp_lower_drq(s);
893 } else if (s->ti_cmd == CMD_TI) {
894 esp_do_nodma(s);
898 static void handle_ti(ESPState *s)
900 uint32_t dmalen;
902 if (s->dma && !s->dma_enabled) {
903 s->dma_cb = handle_ti;
904 return;
907 s->ti_cmd = s->rregs[ESP_CMD];
908 if (s->dma) {
909 dmalen = esp_get_tc(s);
910 trace_esp_handle_ti(dmalen);
911 s->rregs[ESP_RSTAT] &= ~STAT_TC;
912 esp_do_dma(s);
913 } else {
914 trace_esp_handle_ti(s->ti_size);
915 esp_do_nodma(s);
919 void esp_hard_reset(ESPState *s)
921 memset(s->rregs, 0, ESP_REGS);
922 memset(s->wregs, 0, ESP_REGS);
923 s->tchi_written = 0;
924 s->ti_size = 0;
925 s->async_len = 0;
926 fifo8_reset(&s->fifo);
927 fifo8_reset(&s->cmdfifo);
928 s->dma = 0;
929 s->do_cmd = 0;
930 s->dma_cb = NULL;
932 s->rregs[ESP_CFG1] = 7;
935 static void esp_soft_reset(ESPState *s)
937 qemu_irq_lower(s->irq);
938 qemu_irq_lower(s->irq_data);
939 esp_hard_reset(s);
942 static void esp_bus_reset(ESPState *s)
944 qbus_reset_all(BUS(&s->bus));
947 static void parent_esp_reset(ESPState *s, int irq, int level)
949 if (level) {
950 esp_soft_reset(s);
954 uint64_t esp_reg_read(ESPState *s, uint32_t saddr)
956 uint32_t val;
958 switch (saddr) {
959 case ESP_FIFO:
960 if (s->dma_memory_read && s->dma_memory_write &&
961 (s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) {
962 /* Data out. */
963 qemu_log_mask(LOG_UNIMP, "esp: PIO data read not implemented\n");
964 s->rregs[ESP_FIFO] = 0;
965 } else {
966 if ((s->rregs[ESP_RSTAT] & 0x7) == STAT_DI) {
967 if (s->ti_size) {
968 esp_do_nodma(s);
969 } else {
971 * The last byte of a non-DMA transfer has been read out
972 * of the FIFO so switch to status phase
974 s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
977 s->rregs[ESP_FIFO] = esp_fifo_pop(&s->fifo);
979 val = s->rregs[ESP_FIFO];
980 break;
981 case ESP_RINTR:
983 * Clear sequence step, interrupt register and all status bits
984 * except TC
986 val = s->rregs[ESP_RINTR];
987 s->rregs[ESP_RINTR] = 0;
988 s->rregs[ESP_RSTAT] &= ~STAT_TC;
990 * According to the datasheet ESP_RSEQ should be cleared, but as the
991 * emulation currently defers information transfers to the next TI
992 * command leave it for now so that pedantic guests such as the old
993 * Linux 2.6 driver see the correct flags before the next SCSI phase
994 * transition.
996 * s->rregs[ESP_RSEQ] = SEQ_0;
998 esp_lower_irq(s);
999 break;
1000 case ESP_TCHI:
1001 /* Return the unique id if the value has never been written */
1002 if (!s->tchi_written) {
1003 val = s->chip_id;
1004 } else {
1005 val = s->rregs[saddr];
1007 break;
1008 case ESP_RFLAGS:
1009 /* Bottom 5 bits indicate number of bytes in FIFO */
1010 val = fifo8_num_used(&s->fifo);
1011 break;
1012 default:
1013 val = s->rregs[saddr];
1014 break;
1017 trace_esp_mem_readb(saddr, val);
1018 return val;
1021 void esp_reg_write(ESPState *s, uint32_t saddr, uint64_t val)
1023 trace_esp_mem_writeb(saddr, s->wregs[saddr], val);
1024 switch (saddr) {
1025 case ESP_TCHI:
1026 s->tchi_written = true;
1027 /* fall through */
1028 case ESP_TCLO:
1029 case ESP_TCMID:
1030 s->rregs[ESP_RSTAT] &= ~STAT_TC;
1031 break;
1032 case ESP_FIFO:
1033 if (s->do_cmd) {
1034 esp_fifo_push(&s->cmdfifo, val);
1037 * If any unexpected message out/command phase data is
1038 * transferred using non-DMA, raise the interrupt
1040 if (s->rregs[ESP_CMD] == CMD_TI) {
1041 s->rregs[ESP_RINTR] |= INTR_BS;
1042 esp_raise_irq(s);
1044 } else {
1045 esp_fifo_push(&s->fifo, val);
1047 break;
1048 case ESP_CMD:
1049 s->rregs[saddr] = val;
1050 if (val & CMD_DMA) {
1051 s->dma = 1;
1052 /* Reload DMA counter. */
1053 if (esp_get_stc(s) == 0) {
1054 esp_set_tc(s, 0x10000);
1055 } else {
1056 esp_set_tc(s, esp_get_stc(s));
1058 } else {
1059 s->dma = 0;
1061 switch (val & CMD_CMD) {
1062 case CMD_NOP:
1063 trace_esp_mem_writeb_cmd_nop(val);
1064 break;
1065 case CMD_FLUSH:
1066 trace_esp_mem_writeb_cmd_flush(val);
1067 fifo8_reset(&s->fifo);
1068 break;
1069 case CMD_RESET:
1070 trace_esp_mem_writeb_cmd_reset(val);
1071 esp_soft_reset(s);
1072 break;
1073 case CMD_BUSRESET:
1074 trace_esp_mem_writeb_cmd_bus_reset(val);
1075 esp_bus_reset(s);
1076 if (!(s->wregs[ESP_CFG1] & CFG1_RESREPT)) {
1077 s->rregs[ESP_RINTR] |= INTR_RST;
1078 esp_raise_irq(s);
1080 break;
1081 case CMD_TI:
1082 trace_esp_mem_writeb_cmd_ti(val);
1083 handle_ti(s);
1084 break;
1085 case CMD_ICCS:
1086 trace_esp_mem_writeb_cmd_iccs(val);
1087 write_response(s);
1088 s->rregs[ESP_RINTR] |= INTR_FC;
1089 s->rregs[ESP_RSTAT] |= STAT_MI;
1090 break;
1091 case CMD_MSGACC:
1092 trace_esp_mem_writeb_cmd_msgacc(val);
1093 s->rregs[ESP_RINTR] |= INTR_DC;
1094 s->rregs[ESP_RSEQ] = 0;
1095 s->rregs[ESP_RFLAGS] = 0;
1096 esp_raise_irq(s);
1097 break;
1098 case CMD_PAD:
1099 trace_esp_mem_writeb_cmd_pad(val);
1100 s->rregs[ESP_RSTAT] = STAT_TC;
1101 s->rregs[ESP_RINTR] |= INTR_FC;
1102 s->rregs[ESP_RSEQ] = 0;
1103 break;
1104 case CMD_SATN:
1105 trace_esp_mem_writeb_cmd_satn(val);
1106 break;
1107 case CMD_RSTATN:
1108 trace_esp_mem_writeb_cmd_rstatn(val);
1109 break;
1110 case CMD_SEL:
1111 trace_esp_mem_writeb_cmd_sel(val);
1112 handle_s_without_atn(s);
1113 break;
1114 case CMD_SELATN:
1115 trace_esp_mem_writeb_cmd_selatn(val);
1116 handle_satn(s);
1117 break;
1118 case CMD_SELATNS:
1119 trace_esp_mem_writeb_cmd_selatns(val);
1120 handle_satn_stop(s);
1121 break;
1122 case CMD_ENSEL:
1123 trace_esp_mem_writeb_cmd_ensel(val);
1124 s->rregs[ESP_RINTR] = 0;
1125 break;
1126 case CMD_DISSEL:
1127 trace_esp_mem_writeb_cmd_dissel(val);
1128 s->rregs[ESP_RINTR] = 0;
1129 esp_raise_irq(s);
1130 break;
1131 default:
1132 trace_esp_error_unhandled_command(val);
1133 break;
1135 break;
1136 case ESP_WBUSID ... ESP_WSYNO:
1137 break;
1138 case ESP_CFG1:
1139 case ESP_CFG2: case ESP_CFG3:
1140 case ESP_RES3: case ESP_RES4:
1141 s->rregs[saddr] = val;
1142 break;
1143 case ESP_WCCF ... ESP_WTEST:
1144 break;
1145 default:
1146 trace_esp_error_invalid_write(val, saddr);
1147 return;
1149 s->wregs[saddr] = val;
1152 static bool esp_mem_accepts(void *opaque, hwaddr addr,
1153 unsigned size, bool is_write,
1154 MemTxAttrs attrs)
1156 return (size == 1) || (is_write && size == 4);
1159 static bool esp_is_before_version_5(void *opaque, int version_id)
1161 ESPState *s = ESP(opaque);
1163 version_id = MIN(version_id, s->mig_version_id);
1164 return version_id < 5;
1167 static bool esp_is_version_5(void *opaque, int version_id)
1169 ESPState *s = ESP(opaque);
1171 version_id = MIN(version_id, s->mig_version_id);
1172 return version_id >= 5;
1175 static bool esp_is_version_6(void *opaque, int version_id)
1177 ESPState *s = ESP(opaque);
1179 version_id = MIN(version_id, s->mig_version_id);
1180 return version_id >= 6;
1183 int esp_pre_save(void *opaque)
1185 ESPState *s = ESP(object_resolve_path_component(
1186 OBJECT(opaque), "esp"));
1188 s->mig_version_id = vmstate_esp.version_id;
1189 return 0;
1192 static int esp_post_load(void *opaque, int version_id)
1194 ESPState *s = ESP(opaque);
1195 int len, i;
1197 version_id = MIN(version_id, s->mig_version_id);
1199 if (version_id < 5) {
1200 esp_set_tc(s, s->mig_dma_left);
1202 /* Migrate ti_buf to fifo */
1203 len = s->mig_ti_wptr - s->mig_ti_rptr;
1204 for (i = 0; i < len; i++) {
1205 fifo8_push(&s->fifo, s->mig_ti_buf[i]);
1208 /* Migrate cmdbuf to cmdfifo */
1209 for (i = 0; i < s->mig_cmdlen; i++) {
1210 fifo8_push(&s->cmdfifo, s->mig_cmdbuf[i]);
1214 s->mig_version_id = vmstate_esp.version_id;
1215 return 0;
1219 * PDMA (or pseudo-DMA) is only used on the Macintosh and requires the
1220 * guest CPU to perform the transfers between the SCSI bus and memory
1221 * itself. This is indicated by the dma_memory_read and dma_memory_write
1222 * functions being NULL (in contrast to the ESP PCI device) whilst
1223 * dma_enabled is still set.
1226 static bool esp_pdma_needed(void *opaque)
1228 ESPState *s = ESP(opaque);
1230 return s->dma_memory_read == NULL && s->dma_memory_write == NULL &&
1231 s->dma_enabled;
1234 static const VMStateDescription vmstate_esp_pdma = {
1235 .name = "esp/pdma",
1236 .version_id = 0,
1237 .minimum_version_id = 0,
1238 .needed = esp_pdma_needed,
1239 .fields = (VMStateField[]) {
1240 VMSTATE_UINT8(pdma_cb, ESPState),
1241 VMSTATE_END_OF_LIST()
1245 const VMStateDescription vmstate_esp = {
1246 .name = "esp",
1247 .version_id = 6,
1248 .minimum_version_id = 3,
1249 .post_load = esp_post_load,
1250 .fields = (VMStateField[]) {
1251 VMSTATE_BUFFER(rregs, ESPState),
1252 VMSTATE_BUFFER(wregs, ESPState),
1253 VMSTATE_INT32(ti_size, ESPState),
1254 VMSTATE_UINT32_TEST(mig_ti_rptr, ESPState, esp_is_before_version_5),
1255 VMSTATE_UINT32_TEST(mig_ti_wptr, ESPState, esp_is_before_version_5),
1256 VMSTATE_BUFFER_TEST(mig_ti_buf, ESPState, esp_is_before_version_5),
1257 VMSTATE_UINT32(status, ESPState),
1258 VMSTATE_UINT32_TEST(mig_deferred_status, ESPState,
1259 esp_is_before_version_5),
1260 VMSTATE_BOOL_TEST(mig_deferred_complete, ESPState,
1261 esp_is_before_version_5),
1262 VMSTATE_UINT32(dma, ESPState),
1263 VMSTATE_STATIC_BUFFER(mig_cmdbuf, ESPState, 0,
1264 esp_is_before_version_5, 0, 16),
1265 VMSTATE_STATIC_BUFFER(mig_cmdbuf, ESPState, 4,
1266 esp_is_before_version_5, 16,
1267 sizeof(typeof_field(ESPState, mig_cmdbuf))),
1268 VMSTATE_UINT32_TEST(mig_cmdlen, ESPState, esp_is_before_version_5),
1269 VMSTATE_UINT32(do_cmd, ESPState),
1270 VMSTATE_UINT32_TEST(mig_dma_left, ESPState, esp_is_before_version_5),
1271 VMSTATE_BOOL_TEST(data_in_ready, ESPState, esp_is_version_5),
1272 VMSTATE_UINT8_TEST(cmdfifo_cdb_offset, ESPState, esp_is_version_5),
1273 VMSTATE_FIFO8_TEST(fifo, ESPState, esp_is_version_5),
1274 VMSTATE_FIFO8_TEST(cmdfifo, ESPState, esp_is_version_5),
1275 VMSTATE_UINT8_TEST(ti_cmd, ESPState, esp_is_version_5),
1276 VMSTATE_UINT8_TEST(lun, ESPState, esp_is_version_6),
1277 VMSTATE_END_OF_LIST()
1279 .subsections = (const VMStateDescription * []) {
1280 &vmstate_esp_pdma,
1281 NULL
1285 static void sysbus_esp_mem_write(void *opaque, hwaddr addr,
1286 uint64_t val, unsigned int size)
1288 SysBusESPState *sysbus = opaque;
1289 ESPState *s = ESP(&sysbus->esp);
1290 uint32_t saddr;
1292 saddr = addr >> sysbus->it_shift;
1293 esp_reg_write(s, saddr, val);
1296 static uint64_t sysbus_esp_mem_read(void *opaque, hwaddr addr,
1297 unsigned int size)
1299 SysBusESPState *sysbus = opaque;
1300 ESPState *s = ESP(&sysbus->esp);
1301 uint32_t saddr;
1303 saddr = addr >> sysbus->it_shift;
1304 return esp_reg_read(s, saddr);
1307 static const MemoryRegionOps sysbus_esp_mem_ops = {
1308 .read = sysbus_esp_mem_read,
1309 .write = sysbus_esp_mem_write,
1310 .endianness = DEVICE_NATIVE_ENDIAN,
1311 .valid.accepts = esp_mem_accepts,
1314 static void sysbus_esp_pdma_write(void *opaque, hwaddr addr,
1315 uint64_t val, unsigned int size)
1317 SysBusESPState *sysbus = opaque;
1318 ESPState *s = ESP(&sysbus->esp);
1320 trace_esp_pdma_write(size);
1322 switch (size) {
1323 case 1:
1324 esp_pdma_write(s, val);
1325 break;
1326 case 2:
1327 esp_pdma_write(s, val >> 8);
1328 esp_pdma_write(s, val);
1329 break;
1331 esp_pdma_cb(s);
1334 static uint64_t sysbus_esp_pdma_read(void *opaque, hwaddr addr,
1335 unsigned int size)
1337 SysBusESPState *sysbus = opaque;
1338 ESPState *s = ESP(&sysbus->esp);
1339 uint64_t val = 0;
1341 trace_esp_pdma_read(size);
1343 switch (size) {
1344 case 1:
1345 val = esp_pdma_read(s);
1346 break;
1347 case 2:
1348 val = esp_pdma_read(s);
1349 val = (val << 8) | esp_pdma_read(s);
1350 break;
1352 if (fifo8_num_used(&s->fifo) < 2) {
1353 esp_pdma_cb(s);
1355 return val;
1358 static void *esp_load_request(QEMUFile *f, SCSIRequest *req)
1360 ESPState *s = container_of(req->bus, ESPState, bus);
1362 scsi_req_ref(req);
1363 s->current_req = req;
1364 return s;
1367 static const MemoryRegionOps sysbus_esp_pdma_ops = {
1368 .read = sysbus_esp_pdma_read,
1369 .write = sysbus_esp_pdma_write,
1370 .endianness = DEVICE_NATIVE_ENDIAN,
1371 .valid.min_access_size = 1,
1372 .valid.max_access_size = 4,
1373 .impl.min_access_size = 1,
1374 .impl.max_access_size = 2,
1377 static const struct SCSIBusInfo esp_scsi_info = {
1378 .tcq = false,
1379 .max_target = ESP_MAX_DEVS,
1380 .max_lun = 7,
1382 .load_request = esp_load_request,
1383 .transfer_data = esp_transfer_data,
1384 .complete = esp_command_complete,
1385 .cancel = esp_request_cancelled
1388 static void sysbus_esp_gpio_demux(void *opaque, int irq, int level)
1390 SysBusESPState *sysbus = SYSBUS_ESP(opaque);
1391 ESPState *s = ESP(&sysbus->esp);
1393 switch (irq) {
1394 case 0:
1395 parent_esp_reset(s, irq, level);
1396 break;
1397 case 1:
1398 esp_dma_enable(opaque, irq, level);
1399 break;
1403 static void sysbus_esp_realize(DeviceState *dev, Error **errp)
1405 SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1406 SysBusESPState *sysbus = SYSBUS_ESP(dev);
1407 ESPState *s = ESP(&sysbus->esp);
1409 if (!qdev_realize(DEVICE(s), NULL, errp)) {
1410 return;
1413 sysbus_init_irq(sbd, &s->irq);
1414 sysbus_init_irq(sbd, &s->irq_data);
1415 assert(sysbus->it_shift != -1);
1417 s->chip_id = TCHI_FAS100A;
1418 memory_region_init_io(&sysbus->iomem, OBJECT(sysbus), &sysbus_esp_mem_ops,
1419 sysbus, "esp-regs", ESP_REGS << sysbus->it_shift);
1420 sysbus_init_mmio(sbd, &sysbus->iomem);
1421 memory_region_init_io(&sysbus->pdma, OBJECT(sysbus), &sysbus_esp_pdma_ops,
1422 sysbus, "esp-pdma", 4);
1423 sysbus_init_mmio(sbd, &sysbus->pdma);
1425 qdev_init_gpio_in(dev, sysbus_esp_gpio_demux, 2);
1427 scsi_bus_init(&s->bus, sizeof(s->bus), dev, &esp_scsi_info);
1430 static void sysbus_esp_hard_reset(DeviceState *dev)
1432 SysBusESPState *sysbus = SYSBUS_ESP(dev);
1433 ESPState *s = ESP(&sysbus->esp);
1435 esp_hard_reset(s);
1438 static void sysbus_esp_init(Object *obj)
1440 SysBusESPState *sysbus = SYSBUS_ESP(obj);
1442 object_initialize_child(obj, "esp", &sysbus->esp, TYPE_ESP);
1445 static const VMStateDescription vmstate_sysbus_esp_scsi = {
1446 .name = "sysbusespscsi",
1447 .version_id = 2,
1448 .minimum_version_id = 1,
1449 .pre_save = esp_pre_save,
1450 .fields = (VMStateField[]) {
1451 VMSTATE_UINT8_V(esp.mig_version_id, SysBusESPState, 2),
1452 VMSTATE_STRUCT(esp, SysBusESPState, 0, vmstate_esp, ESPState),
1453 VMSTATE_END_OF_LIST()
1457 static void sysbus_esp_class_init(ObjectClass *klass, void *data)
1459 DeviceClass *dc = DEVICE_CLASS(klass);
1461 dc->realize = sysbus_esp_realize;
1462 dc->reset = sysbus_esp_hard_reset;
1463 dc->vmsd = &vmstate_sysbus_esp_scsi;
1464 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
1467 static const TypeInfo sysbus_esp_info = {
1468 .name = TYPE_SYSBUS_ESP,
1469 .parent = TYPE_SYS_BUS_DEVICE,
1470 .instance_init = sysbus_esp_init,
1471 .instance_size = sizeof(SysBusESPState),
1472 .class_init = sysbus_esp_class_init,
1475 static void esp_finalize(Object *obj)
1477 ESPState *s = ESP(obj);
1479 fifo8_destroy(&s->fifo);
1480 fifo8_destroy(&s->cmdfifo);
1483 static void esp_init(Object *obj)
1485 ESPState *s = ESP(obj);
1487 fifo8_create(&s->fifo, ESP_FIFO_SZ);
1488 fifo8_create(&s->cmdfifo, ESP_CMDFIFO_SZ);
1491 static void esp_class_init(ObjectClass *klass, void *data)
1493 DeviceClass *dc = DEVICE_CLASS(klass);
1495 /* internal device for sysbusesp/pciespscsi, not user-creatable */
1496 dc->user_creatable = false;
1497 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
1500 static const TypeInfo esp_info = {
1501 .name = TYPE_ESP,
1502 .parent = TYPE_DEVICE,
1503 .instance_init = esp_init,
1504 .instance_finalize = esp_finalize,
1505 .instance_size = sizeof(ESPState),
1506 .class_init = esp_class_init,
1509 static void esp_register_types(void)
1511 type_register_static(&sysbus_esp_info);
1512 type_register_static(&esp_info);
1515 type_init(esp_register_types)